[Q] Deleted important files with titanium backup - General Questions and Answers

Hey.
First post here!!! But sadly I'm admitting to being a noob...
I recently rooted my galaxy s4 i337 and I heard about deleting bloatware so I was like, "hey that sounds cool!"
Sadly I did not realize the effects that deleting those files could cause to the device... I have factory reset my phone at least 5 times hopping that the deleted files would come back.... but they did not.
My problems are that whenever I pull up s-voice, I comes up with a message saying, "Unfortunately, S-voice has stopped working". I tried re-installing it with files I found from this site but then it started saying that I could not connect to the network so that was a dead end. I also have messages when I do various tasks says, "Unfortunately, Samsung text-to-voice engine has stopped."
I really need help!!! I change my main language text to voice thing to google instead of samsung and that helped a little, but I still get the occasional message and s voice is completely broken. I saw that re installing chat on could help and i downloaded it because I think I may have deleted it, but it made absolutely 0 difference...
Please help!!! Thanks

stock
JonathanG26 said:
Hey.
First post here!!! But sadly I'm admitting to being a noob...
I recently rooted my galaxy s4 i337 and I heard about deleting bloatware so I was like, "hey that sounds cool!"
Sadly I did not realize the effects that deleting those files could cause to the device... I have factory reset my phone at least 5 times hopping that the deleted files would come back.... but they did not.
My problems are that whenever I pull up s-voice, I comes up with a message saying, "Unfortunately, S-voice has stopped working". I tried re-installing it with files I found from this site but then it started saying that I could not connect to the network so that was a dead end. I also have messages when I do various tasks says, "Unfortunately, Samsung text-to-voice engine has stopped."
I really need help!!! I change my main language text to voice thing to google instead of samsung and that helped a little, but I still get the occasional message and s voice is completely broken. I saw that re installing chat on could help and i downloaded it because I think I may have deleted it, but it made absolutely 0 difference...
Please help!!! Thanks
Click to expand...
Click to collapse
There is a solution .... Flash Stock firmware again... yeah that will work for sure..
here is how you do it ... http://forum.xda-developers.com/showthread.php?t=2261573
go to this thread and download firmware..... flashing instructions are given in thread ... reply if any issue or reply if this worked( it will for sure) :laugh:

MP3 root
samith.shetty3 said:
There is a solution .... Flash Stock firmware again... yeah that will work for sure..
here is how you do it ... http://forum.xda-developers.com/showthread.php?t=2261573
go to this thread and download firmware..... flashing instructions are given in thread ... reply if any issue or reply if this worked( it will for sure) :laugh:
Click to expand...
Click to collapse
Hey I have actually already tried that but I dont think it works with the MP3 root? It did not recognize my device... I downloaded all of the files and loaded to odin thing but sadly it didnt recognize it?...

JonathanG26 said:
Hey I have actually already tried that but I dont think it works with the MP3 root? It did not recognize my device... I downloaded all of the files and loaded to odin thing but sadly it didnt recognize it?...
Click to expand...
Click to collapse
use this to solve USB connection problems
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Connected
xsenman said:
use this to solve USB connection problems
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Click to expand...
Click to collapse
Thanks for that! but I sadly have another problem...So I have the device as recognize saying 0:[COM10]
So i hit run while my gs4 is in downloading mode and it gets stuck on setupconnection...
I re did everything in a different usb port and i got complete(write) operation failed
how do i fix this

JonathanG26 said:
Thanks for that! but I sadly have another problem...So I have the device as recognize saying 0:[COM10]
So i hit run while my gs4 is in downloading mode and it gets stuck on setupconnection...
I re did everything in a different usb port and i got complete(write) operation failed
how do i fix this
Click to expand...
Click to collapse
use guide in MY Android Solution to solve it. basically the problem would be due to KIES or you may have currupted download
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

cant find
xsenman said:
use guide in MY Android Solution to solve it. basically the problem would be due to KIES or you may have currupted download
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Click to expand...
Click to collapse
I looked through your post but unfortunately I cant find anything to fix my problem?

JonathanG26 said:
I looked through your post but unfortunately I cant find anything to fix my problem?
Click to expand...
Click to collapse
you did?
[3] Problem:- Odin gets Stuck on <ID:0/008> Set PIT file. or <ID:0/003> SetupConnection.. or <ID:0/007> Removed!
Note:
When using Odin to Flash, Open task manager and close these : Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe
IF your downloaded File (.tar, .zip, .md5 .rar ) is corrupted, Odin could get stuck too, so download from another source, if it happens repeatedly
Solution:-
First reboot PC after a power cord unplug and also reboot the Phone after a battery pull. Always use a Fresh Odin after any attempt to flash, than make sure you "Uncheck Repartition", If you had checked it or clicked Pit when you are not using one. You should also be running Odin as an Admin and ensure that KIES is not running when using Odin. Most of all, only use Samsung USB cable and not others as they may be incompatible and trying it out on a lap top or another PC ( when it happens repeatedly)
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Drivers
JonathanG26 said:
Hey I have actually already tried that but I dont think it works with the MP3 root? It did not recognize my device... I downloaded all of the files and loaded to odin thing but sadly it didnt recognize it?...
Click to expand...
Click to collapse
This happened because the drivers for ur device is missing first downbload and intall samsung kies from this link http://www.samsung.com/in/support/usefulsoftware/KIES/JSP after installation connect ur device and wait for drivers to install after that go to download mode (steps given in thread) open odin flash the firmware :good:

samith.shetty3 said:
This happened because the drivers for ur device is missing first downbload and intall samsung kies from this link http://www.samsung.com/in/support/usefulsoftware/KIES/JSP after installation connect ur device and wait for drivers to install after that go to download mode (steps given in thread) open odin flash the firmware :good:
Click to expand...
Click to collapse
I already fixed that problem. Now whenever I attempt to flash my gs4 it fails. I still have no idea how to fix it. It is on the mp3 update if that makes a difference. Please help

JonathanG26 said:
I already fixed that problem. Now whenever I attempt to flash my gs4 it fails. I still have no idea how to fix it. It is on the mp3 update if that makes a difference. Please help
Click to expand...
Click to collapse
i think the firmware is not for i337 try this link http://forum.xda-developers.com/showthread.php?t=2263533 download firmware from here and try...

Related

O2 XDA Zinc - OS freezing and strange error appers [Windows Mobile 5]

Hi all;
My name is Dean and i have strange problem with my PDA.
The device is bought in Thailand in 2006 during my visitation to the country, originally I'm from Serbia.
PDA device is: O2, XDA Zinc, Windows Mobile 5.0 [English language]
On my laptop i have ActiveSync 4.5.0 installed and broadband internet connection.
Here is description of problem:
I wanted to connect my PDA device to my laptop using USB data cable, so i could have internet on it, but here is what happened.
I plug the cable to the device and my activesync didn't recognize the device. Instead strange error appeared on the display, saying "can not execute Mobilerss.exe" and then OS just freeze. I unplugged the device, preformed soft reset but this time i didn't plug in the cable, and again error showed and OS freezes.
With OS frozen like this i couldn't do anything... even the backlight went off and it wont turn on when i press button or tap the touch screen!
I though it would be good to uninstall mobile rss application which causes the problem, and because i don't use it wont be a problem, so i tried to do it, but i couldn't. [Maybe i didn't know how] so i deleted the app folder from the program files manually.
After that i hoped that i solved the problem but i was surprised to see the same error again!!! I did hard reset, even that didn't help...
I got one suggestion to try uninstall activesync and install older version, so i did that... I used 4.2 this time but error was still there, same message on the screen etc...
Now, what ever i do, plug or unplug the cable, preform soft or hard reset OS just freezes and i cant do anything...
Im running out of options so i ask for help of all you people.
If you need more details and i can provide them just ask, no problem.
Thank you in advance for any suggestion...
Dolke
What I Would Suggest To You Is Upgrade To A New Rom.
I Have Error's Like That Before On My WM5 on My o2 Zinc II
Upgrade To WM6 Official o2 Rom Still Has Bugs But I Upgraded my Rom Again to WM6.1 Cruzzmz Rom And its Working
Download His Rom Here:
Code:
http://forum.xda-developers.com/showthread.php?t=402283&highlight=zinc
Follow Cruzzmz Instrution:
HOW TO FLASH UR ZINC ROM
--------------------------------------------------------------
1. Copy MarsII_G4.ABI file to ur MiniSD card (card must be less than 4G)
2. Plug usb wall charger to your Zinc
3. Push/Hold ur Right arrow Dpad button & do Soft Reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Zinc will reboot & will be in 3 color boot screen
5. See progress of updating
6. Zinc will reboot after finished updating
________________________________________________________________
It Works Fast On Mine! It Should Do Just Fine On Urs
I flashed it...
I got that boot screen image, the green wm6, and than i was asked to tap the screen. Screen align program started and i'm stuck, i can't turn it off or enter home windows screen!
Help please
Try to reflash it one more time. Make sure that you are following ashburn's instructions properly since you have a chance of bricking the device if you don't follow procedure...
egzthunder1 said:
Try to reflash it one more time. Make sure that you are following ashburn's instructions properly since you have a chance of bricking the device if you don't follow procedure...
Click to expand...
Click to collapse
I did it again... followed every instruction written above but i just stopped at same place... Activesync recognizes the device, and the green LED blinks... but i cant get out of alignment application and see the home screen in WM..
I even tried to flash the device with older crumzz ROM - 19202-Xlt but OS stopped at same place - align app! Don't have a clue why is this happening ???
Are you leaving your device connected to the computer after its done with the flashing? It might be that AS is trying to sync with the device while it is setting up all the initial files and such...
After you are done flashing, try to disconnect the device from the computer, so that you no longer have interference from AS.
Alternatively, you could try to flash a stock rom. That normally solves a few issues here and there.
Good luck.
egzthunder1 said:
Alternatively, you could try to flash a stock rom. That normally solves a few issues here and there.
Click to expand...
Click to collapse
First, thanks for the help mate.
I disconnected the USB cable - didn't help...
I even terminated AS process from the Windows Task Manager so it couldn't interfere with the process of flashing...
What about this i quoted above? Can you give me some tips, thanks ?
dolke said:
First, thanks for the help mate.
I disconnected the USB cable - didn't help...
I even terminated AS process from the Windows Task Manager so it couldn't interfere with the process of flashing...
What about this i quoted above? Can you give me some tips, thanks ?
Click to expand...
Click to collapse
dude a good idea is not to use USB cable to charge the phone use a wallplug one.... it works really well.... nvm ill talk to cruzzmz about this matter we will see what he has to say but try flashing with Wallplug charger instead of usb
ashburn said:
dude a good idea is not to use USB cable to charge the phone use a wallplug one....
Click to expand...
Click to collapse
I tried to do it with wall-plug... Same thing again!!!
dolke said:
First, thanks for the help mate.
I disconnected the USB cable - didn't help...
I even terminated AS process from the Windows Task Manager so it couldn't interfere with the process of flashing...
What about this i quoted above? Can you give me some tips, thanks ?
Click to expand...
Click to collapse
A stock rom is a rom that is provided by your carrier/mgf of your phone. It is basically the original rom that came with your device. For the most part, most vendors have them available for download or by request to their customer support centers. Try to look in the O2 page, you might find it there.
Are you taking out the storage card before flashing? I have seen this causing problems in different phones when they are left in.
egzthunder1 said:
A stock rom is a rom that is provided by your carrier/mgf of your phone. It is basically the original rom that came with your device. For the most part, most vendors have them available for download or by request to their customer support centers. Try to look in the O2 page, you might find it there.
Are you taking out the storage card before flashing? I have seen this causing problems in different phones when they are left in.
Click to expand...
Click to collapse
right o2 has it somewhere i remember... choose ur country the actual one not thailand.. hehee there is Windows Mobile 6 WWE something there..
give it a shot
People... I don't know what to say...
I download-ed update ROM for WM6, the one from the O2 support site, and tried to update it... Everything went well, but at same place like earlier, device stacked! It is align app again, and i can't get out from it...
Some more suggestions?
dolke said:
People... I don't know what to say...
I download-ed update ROM for WM6, the one from the O2 support site, and tried to update it... Everything went well, but at same place like earlier, device stacked! It is align app again, and i can't get out from it...
Some more suggestions?
Click to expand...
Click to collapse
The only other thing I can think of is that your digitizer is busted. Do you have a warranty? You may be able to send your phone for repair...
hmmmm u try and sync ur Mobile..... look for a software thats skips the Align menu... i got a blue angel too that happen like urs before i use a certain app to do it and it skips tthe align thingy... well all i know my blue angel was not working well... i accidentally drop it one day and the touch screen works... but im not asking u to drop it lol... do not take the risk like me haha... but try to look for the soft i mention above....
egzthunder1 said:
The only other thing I can think of is that your digitizer is busted. Do you have a warranty? You may be able to send your phone for repair...
Click to expand...
Click to collapse
Device is bought in Thailand and I'm from Serbia, so warranty is off little use. O2 and Telefonica company are not present here not even in surrounding countries so i doubt i could have it serviced...
Ashburn, i'll consider your advice and try to find that app. Can you tell me any tip, maybe the name off the app or part of the name...anything that could help, tnx
UPDATE on my issue
I manage to solve this problem by making an empty file welcome.not [just make notepad text file, but change the extension from .txt to .not] and then upload it to root of the SD card.
I did HR and SF... after that OS booted without welcome screen and alignment setting...
Thank you all for the support!
I suggest mod's to put SOLVED tag in the subject of this thread.
dolke said:
UPDATE on my issue
I manage to solve this problem by making an empty file welcome.not [just make notepad text file, but change the extension from .txt to .not] and then upload it to root of the SD card.
I did HR and SF... after that OS booted without welcome screen and alignment setting...
Thank you all for the support!
I suggest mod's to put SOLVED tag in the subject of this thread.
Click to expand...
Click to collapse
ehehe good job friend i was not sure about the app name used to have it.. i was looking for it until lol u found a solution
Hey Ashburn, i have one q about this cruzzmz ROM's...maybe u are familiar with those...
I see that they are all with WM6.1 version. It is working perfectly on my Zinc, but i was wondering if this is latest V of the OS?
currently cruzzmz is doing something with the latest one.... u got to wait lol cause i did a beta testing half of the file were chinese. and half of it was english cruzzmz is going thru abit of a tight situation right now removing the wip or system file that has chinese so we have to hold on for a moment... hehe and for WM 6.5 we to got to wait... im trying to figure out how to make a rom of my own but i succeded in making WM 6.1 rom of my own with the help of cruzzmz well for now we got to wait for him. Due to respect lol his abit busy
Great... well we have to respect everyone's time and efforts
nice that he already started to work on the newest 6.5 ROM...wish him all luck he need to finish it
Hear ya...

[GUIDE]Root/Recovery Hapai X710D MTK6577

Here are all the steps to root and install a custom recovery on your X710D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Download files HERE
2. Extract 'Android flash' anywhere to your desktop
3. Open the folder within called 'USB VCOM Driver' and chose the folder then file that is your operating system (the .inf) and paste it to your desktop
4. Pull the battery out of your phone and connect the phone to you computer whilst holding the volume up button
5. Open device manager. You should see your phone (it re-appeared every 5 seconds for me). Right click on your phone and press update driver, then browse manually for the .inf file you put on your desktop. Once you've done that disconnect your phone
6. Open 'Android flash' and open Flash_tool and select all the files to make it look like the picture below
7. Press download, then plug in your phone whilst pressing volume up button
8. Done! You now have CWM and have rooted your phone! There are also some other apps that are added too
If you are having issues with your IMEI code read this post here: http://forum.xda-developers.com/showpost.php?p=30534835&postcount=32
There's also a issue with external sd cards which is currently being worked on. (phone can't write to sd card. if you attempt, phone reports sd card as damaged and sd card will need to be re-formatted)
Big thanks to yiminghung, he helped me figure out how to do it.
If I've made any errors in this please tell me I will fix asap, and if anyone has any updates/ROMs, please message me and I'll post them here.
Looks Good!
additional information
for additional information look here:
http://forum.xda-developers.com/showpost.php?p=30534835&postcount=32
good work!
help for the mtk6577 n9770
Hi,
Please help me
This is what happen first
After I root the phone (n9770 mtk6577) then wipe all data from user and system apps the camera now doesnt work, I press the app and is in black, I dont know if it is the boot image rooted is giving me the problem but I flash again the original boot image and get nothing the same, then I did a factory reset and is same no camera, maybe is not software faulty but hardware? I will try reflashing the stock rom 4.0.9, could you give me some direction on how to flash because I used SP_Flash_Tool_v3.1222.00 and i have installed the usb driver for win 7 64bit, please let me know what direction I should follow.
Now is what i have done after that
I have flash with the tool the custom recovery but I did not read that i had to uncheck boot and preloader, and now the phone is not booting, pleasee pleasee help me
I have donwload the rom but i dont know how to reflash or simply fix the preloader issue
ztrike said:
Hi,
Please help me
This is what happen first
After I root the phone (n9770 mtk6577) then wipe all data from user and system apps the camera now doesnt work, I press the app and is in black, I dont know if it is the boot image rooted is giving me the problem but I flash again the original boot image and get nothing the same, then I did a factory reset and is same no camera, maybe is not software faulty but hardware? I will try reflashing the stock rom 4.0.9, could you give me some direction on how to flash because I used SP_Flash_Tool_v3.1222.00 and i have installed the usb driver for win 7 64bit, please let me know what direction I should follow.
Now is what i have done after that
I have flash with the tool the custom recovery but I did not read that i had to uncheck boot and preloader, and now the phone is not booting, pleasee pleasee help me
I have donwload the rom but i dont know how to reflash or simply fix the preloader issue
Click to expand...
Click to collapse
doppelpost!
see here
http://forum.xda-developers.com/showpost.php?p=30604249&postcount=40
Getting warning message "not all images are correctly loaded"
Followed all step to the "click Download", when i click download a warning dialog tells me that not all images are correctly loaded, which may cause boot up issue!, do I want to continue"
I have checked many times and all images are set as you have shown in your screen shot?
Any Idea what is not right?
Edit: it appears to be caused by DSP_BL not being selected??
info
hi
may I ask an information.
I'm going to buy a zp900 9300+ is a clone of the zoppo zp900
with mtk6577 and 512mb of ram... with android 4.1.1
do you think is possible to use the same procedure for the root
of the phone? do I have to uncheck something? or change any file?
thanks
Antonio
paperinik77 said:
hi
may I ask an information.
I'm going to buy a zp900 9300+ is a clone of the zoppo zp900
with mtk6577 and 512mb of ram... with android 4.1.1
do you think is possible to use the same procedure for the root
of the phone? do I have to uncheck something? or change any file?
thanks
Antonio
Click to expand...
Click to collapse
i bought the same phone and would love to know if this root method works for this phone, it has the same MTK6577 CPU as the haipai X710D
Hi all. I am a new registered. My name is Filippo and I'm Italian (sorry for my English googltraslate).
In a few days I will come to me x710d. I wanted to ask you questions.
1) What improvements does the root of the phone? Have to wait at the root with the update to Android 4.1 bj?
2) Before you root, I have to make a backup / image of the system for use in case I have a problem? If it is, how should I do it?
3) This root change the size of the internal memory or I'll do it later? In the second case, how can I swap the memory card with the internal one?
The last question is that there is risk in doing these operations? You advise me to do to its?
Excuse my inexperience and thank you all in advance.
Thank you so much for posting this. The Flash tool is quite confusing to use. Your instructions really helped.
---------- Post added at 11:30 AM ---------- Previous post was at 11:26 AM ----------
Technica said:
Followed all step to the "click Download", when i click download a warning dialog tells me that not all images are correctly loaded, which may cause boot up issue!, do I want to continue"
I have checked many times and all images are set as you have shown in your screen shot?
Any Idea what is not right?
Edit: it appears to be caused by DSP_BL not being selected??
Click to expand...
Click to collapse
Just click "YES". you dont have to check any of the images.
Hi, i´m seller of this model ( X810d ) and it work´s like a charm too!
Thanks so much!
WWW.HIPHONEBRAZIL.BLOGSPOT.COM
Filippo.digi said:
Hi all. I am a new registered. My name is Filippo and I'm Italian (sorry for my English googltraslate).
In a few days I will come to me x710d. I wanted to ask you questions.
1) What improvements does the root of the phone? Have to wait at the root with the update to Android 4.1 bj?
2) Before you root, I have to make a backup / image of the system for use in case I have a problem? If it is, how should I do it?
3) This root change the size of the internal memory or I'll do it later? In the second case, how can I swap the memory card with the internal one?
The last question is that there is risk in doing these operations? You advise me to do to its?
Excuse my inexperience and thank you all in advance.
Click to expand...
Click to collapse
nobody can help me?
silvacrest said:
i bought the same phone and would love to know if this root method works for this phone, it has the same MTK6577 CPU as the haipai X710D
Click to expand...
Click to collapse
i've just got this model too
great work
i've just want to know how to root it
Success or Failure
I have tried many ways\suggestions to root my X710D and this is the only one I have not yet tried.
Before I do try this procedure It would be helpful if people that have done this on the X710D could report their success or failure.
I would like to know this because I do not know enough and do not want the get into more trouble with the device.
Thanks for sharing your experiences....
I successfully rooted my x710d using the steps given. Before I rooted my phone, I updated it to the latest 4.0.9 (latest firmware is in another forum read here).
This root also comes with the custom recovery (probably taken from HTC because there is an HTC boot screen logo). However, I encountered three main problems after the I successfully executed everything.
First, my IMEI got erased (solved this using ZOPO). (read here there is an explanation how to put your IMEI's back. )
Second, external Sd-card gets no write permissions and also it errors damaged sd-card from time to time (still finding ways to solve this).
Third; Since, I live in Japan, I am still finding ways how to enable MMS on this thing through sofbank.
for the good side;
Rooted phone is awesome.
This phone is quite fast for its price especially with the new firmware.
Sofbank APN settings where automatically there already (I dunno if this was because of ICS or X710d firmware just came in with these settings). Everything else is working very well. Camera, Bluetooth, GPS, WIFI, Radio, etc....
GreatPharaoh Thanks for such a clear and detailed post, this is what makes XDADevelopers such a great community.
Your reply is just what I needed to hear, me being new to this platform.
I purchased one of these as a development machine with the intention of using it as my phone also, but I had been highlighted that some sellers just are not in a position to support the products they sell. We also order two more from another seller to edge our bets on delivery times, but when we discovered some issues and the second seller also demonstrated that they have poor after sales support when managed to cancel these additional two X710D (with an insulting response from this seller).
I my case I asked very specific questions about the product and got nothing but positive replies before purchase, in addition I needed the device to have a working compass and magnetic sensor which also received a "Yes" but once we confirmed payment communication with the delivery and questions dried up. Once delivered, we found that while the X710D does have a Compass and Magnetic sensor they are not implemented.
Now we are concerned about the IMEI bug and these seller does not want to know about it.
So, while we accepted some risk in purchasing a Chinese phone at reasonable price, we really are concerned about this model and did not anticipate the amount of risk.
Now being a software developer (not Android or Linux) I had the approach the we can fix anything, but at this time in a new OS world it has proven to be again high risk and we can not afford to brick this device. So we have decided to return it for a refund.
I will continue to monitor these posts, because I am keen to see if things get resolved and to learn from the experiences of others. It is great to see many members with far greater skills than mine helping each other.
I have also had great hand-holding from ColonelZap through some of out attempts to resolve these issues, so a huge thanks to him.
Again thanks GreatPharaoh for a great post and I am sure that it will help others looking at the X710D and maybe they will find a solution to your remaining issues.
Technica
GreatPharaoh said:
I successfully roThamy x710d using the steps given. Before I rooted my phone, I updated it to the latest 4.0.9 (latest firmware is in another forum read here).
This root also comes with the custom recovery (probably taken from HTC because there is an HTC boot screen logo). However, I encountered three main problems after the I successfully executed everything.
First, my IMEI got erased (solved this using ZOPO). (read here there is an explanation how to put your IMEI's back. )
Second, external Sd-card gets no write permissions and also it errors damaged sd-card from time to time (still finding ways to solve this).
....
Click to expand...
Click to collapse
The X710D is a copy of the HTC Evo 4g LTE which will explain the boot logo.
Thank you for mentioning the sd card issue, i bought a rather expensive 32gb class 10 card to find it didnt work in my phone. Its very difficult to get it to work and when it does work my phone cant write to it. If you find a fix ill update the maim post.
Ive noticed lots of people mentioning issues with their imei codes. I havent come across this issue but there is a fix at post 3. Ill update the main post with it later.
Im posting from my phone sp sorry for typing errors. Whats th best keyboard for this phone? Im currently usibg swype but as you can see its.pretty bad. The defaultkeyboard it even more difficult to type.on
x710d sd card issue
jaw2floor said:
The X710D is a copy of the HTC Evo 4g LTE which will explain the boot logo.
Thank you for mentioning the sd card issue, i bought a rather expensive 32gb class 10 card to find it didnt work in my phone. Its very difficult to get it to work and when it does work my phone cant write to it. If you find a fix ill update the maim post.
Ive noticed lots of people mentioning issues with their imei codes. I havent come across this issue but there is a fix at post 3. Ill update the main post with it later.
Im posting from my phone sp sorry for typing errors. Whats th best keyboard for this phone? Im currently usibg swype but as you can see its.pretty bad. The defaultkeyboard it even more difficult to type.on
Click to expand...
Click to collapse
did you get a chance to see what the fix is for sd card problems? its driving me crazy
Lost IMEI on x710D
Is this issue of losing IMEI only related to the X710D or is this a common problem with Chinese Android phones?
Once again, deepest Thanks to Jaw2Floor for posting the steps.
@Technica; yup, I couldn't agree with you more about these sellers. Seems like these phones where probably manufactured in someones old garage with one or two developers who couldn't do much english. And they would just send em to these vendors for retail. These sellers, However, are so smart with marketing, they would flood youtube and google with fake reviews (although most of em are just unboxings) and lead us with just curiosities. This is probably why they are so good at selling but very bad in support. Long story short, we are only paying for the hardware here.
For the Imei case: I wonder why everyone is not having this problem..?. Maybe this is also hardware related. This was the first problem I faced right after my first ever Factory Default Reset on the phone. I was so terrified that moment, I thought I bricked or fried the modem.
The Sd-card issue is still there: "My temporary fix is reformat card in PC and recopy your media. Do this every time you get the damaged sd-card error."
I can access my card with read permissions only. My media gallery and other media apps can see the card and the contents. However, as soon as I start to write the card (e.g. making new folder or deleting a file from any file explorer app) the "Damaged sd-card error" will start to appear and you wont be able to get rid of this until you take the card out, format it in your PC, recopy all your media, then mount it again in your x710d. This is what ive been doin for the past couple of days to enjoy music in this phone.
The Headphone Jack is also too deep. If you compare side by side the stock headphone/mic with any other regular headphone, this one came in with a much longer jack. I was able to fix this problem by widening the headphone hole on the phone's back casing and also splicing an mm of rubber on my regular headphone jack.
The stock Email-app are having problems setting up with Yahoo's mail servers. So, im using K-9 mail for now.
As for now, I am enjoying this phone. I get a lot of eye's whenever I take this out of my pocket in Tokyo trains. Its not a note! Its the money-saver version.

Root p920 ics4.04

方法一:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5921011&extra=page=1
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5920533
方法二:
大家现在的ROOT方法是要解BT锁,但都知道解BT锁会影响底层性能,用段时间会导致偶尔卡顿触屏不灵等现象,这都是因为第三方BT锁的兼容性引起的,下面说说我个人的见解及步骤:
1、先把已经刷好国际版并解锁ROOT后的系统用RE备份一个,后面有用
2、再刷移植版的4.04
3、按照移植版的ROOT方法先把手机系统给ROOT了
4、不要解锁刷入RE(注意必须是不要解锁状态下刷入RE)
5、再把第1步备份的国际版系统恢复到手机里
6、后面该怎么做大家应该都知道了吧
因为本人这段时间工作太忙,连4.04都没时间刷,怕因为手机影响工作,所以还得需要有时间折腾的机油努力
又想到了另一种方案:
1、刷好国际版并解锁ROOT(这一步相信大部分机油都已经做了)
2、用救砖工具刷回官方的BootLoader(或者把救砖工具里的LG官方BT文件,扩展名为bin,替换掉解BL锁工具的目录里替换,再用解锁工具去再一次解锁,实际是刷回官方的BT文件)
下图中左边是救砖用的LG官方BT文件在omap4boot-for_optimus-v1.16压缩包里,右边是第三方的兼容BT文件在[All-In-One][P920]压缩包里,把左边的文件刷回系统去就相当于把BT锁还原到官方了
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you!
Sent from my LG-P920 using xda app-developers app
looks complicated just install recovery push su to bin and xbin then superuser to app
chmod 644 superuser
chmod 06755 su thats it
啥时候有简单点的方法呀? 不弄底层行不行?
lw_wl said:
啥时候有简单点的方法呀? 不弄底层行不行?
Click to expand...
Click to collapse
哈哈,你也在这里啊,英文咋样,帮俺的翻一下,让老外也试试好不好用:d
In English
I've translated it using Bing:
(Will be improved later)
*
*
Method one:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5921011&extra=page=1
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5920533
Method two:
It is now the ROOT method is to BT solutions for lock, BT but knows solution locks from affecting the underlying performance, period of time can lead to occasional phenomena such as cotton touch screen not work, BT this is because third parties caused by the compatibility of the lock, talk about my personal views and steps below:
1, International Edition has a good brush and unlock the ROOT system after RE back up one, followed by useful
2, then brush transplant version 4.04
3, in accordance with the transplanted ROOT method to ROOT the phone system
Unlock 4, do not flush RE (Note must be flush RE under is not unlocked)
5, and then step back up the 1th international system to mobile phone
What to do after the 6, we should all know it
Because I work this time too busy, no time to brush even 4.04, because mobile phones affect work, efforts also needed time to toss the oil
Thought about another scenario:
1, good brush International Edition and unlock the ROOT (this step to believe that most of the oil has already been done)
Saving bricks for 2, tool brush back to the official BootLoader (or BT files saving brick tools in the LG official, a bin extension, replacing BL lock tool replacing the file in the directory of the solution, then unlock the tool to unlock again, is actually a brush back into the BT official documents)
In the figure below left is saving brick omap4boot-for_optimus-v1.16 cabinet with the LG official BT file on the right third-party compatibility of BT file [All-In-One][P920] compression bag, brush back to the system to file on the left is equivalent to restore to the official BT locks
VfBStuttgart27 said:
I've translated it using Bing:
(Will be improved later)
*
*
Method one:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5921011&extra=page=1
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5920533
Method two:
It is now the ROOT method is to BT solutions for lock, BT but knows solution locks from affecting the underlying performance, period of time can lead to occasional phenomena such as cotton touch screen not work, BT this is because third parties caused by the compatibility of the lock, talk about my personal views and steps below:
1, International Edition has a good brush and unlock the ROOT system after RE back up one, followed by useful
2, then brush transplant version 4.04
3, in accordance with the transplanted ROOT method to ROOT the phone system
Unlock 4, do not flush RE (Note must be flush RE under is not unlocked)
5, and then step back up the 1th international system to mobile phone
What to do after the 6, we should all know it
Because I work this time too busy, no time to brush even 4.04, because mobile phones affect work, efforts also needed time to toss the oil
Thought about another scenario:
1, good brush International Edition and unlock the ROOT (this step to believe that most of the oil has already been done)
Saving bricks for 2, tool brush back to the official BootLoader (or BT files saving brick tools in the LG official, a bin extension, replacing BL lock tool replacing the file in the directory of the solution, then unlock the tool to unlock again, is actually a brush back into the BT official documents)
In the figure below left is saving brick omap4boot-for_optimus-v1.16 cabinet with the LG official BT file on the right third-party compatibility of BT file [All-In-One][P920] compression bag, brush back to the system to file on the left is equivalent to restore to the official BT locks
Click to expand...
Click to collapse
Thanks for your English translate:good:
Method one
Method 1 (will be improved later too):
*
After a whole day of toss finally successfully, will share experiences of friends, I guess there are not people, enter the subject,
1. I followed the success of this method. You can follow this post step by step http://BBS.gfan.com/forum.php?mo ... 3421&extra=page%3D1
Tools are as follows: 1, BL lock tool download solution http://pan.Baidu.com/share/link?shareid=196317&UK=1076531750
After extraction will be ICSv21e_boot this file
Remove phone batteries, insert computer USB,
Computers and cell phones has been called, computer display new hardware 4,430, update driver, which has 4,430 drive, download, unzip to 4430 usb_drv_windows.rar (4.59 MB)
(Download count: 50 yesterday 18:10 upload)!attachcredits!:G coin-1
Everyone's problem may appear here: (install 4,430 drive opens the Device Manager first, pull the battery, plug the line, staring at 4,430 occurs when, immediately right-click the 4,430, select Properties, Driven--update driven then next--from list or specified location installed then next--do not search I to themselves select I to installed of driven then next---double-click displayed so equipment--click from disk installed--click Browse--found just download of 4,430 driven file android_winusb then next--way determines, on installed finished has, 4,430 driven on loaded finished, front of yellow exclamation mark on no has, 4,430 still keeps flashing after installed, do not cares, because the yellow exclamation mark has gone. Open brush program, plug in the data cable will not Flash! ) This time you can open the ROOT software had begun to ROOT.
Driver installation is completed, open the kit, run ICSv21e_boot.bat.
Option 1: brush ICS bootloader and brush into the recovery, brushing this can be brushed directly corresponds to the ICS brush packages
2 options: brushed 21E bootloader and brush into the recovery, brush the brush can be brushed directly corresponds to the cm,2.3 card package
When we choose 1.
Appears "wait 5 seconds" immediately fitted the battery, wait a moment,
Computer displays have a piece of hardware does not drive, manually install the drivers (driving steps and 4,430 drive, I drive the same file).
When the interface displays Your P920 is ready to boot into GB again. Reboot. When
Phone manual reset.
When you have a touch-screen version of the recovery have already been brushed, unlock, and BL.
Well BL solutions after the lock, enter just flush touch-screen version of the RECOVERY, enter: reloading battery was taken out, according to 3D+ volume + power, bright screen after release, LG icon disappears, release d and the volume.
Some are copy-and-paste, easy operation, infringement of your understanding. Hope that we will be successful.
Tool failure, each post has, we speak to, I'm not going to upload.
zlmbbl said:
哈哈,你也在这里啊,英文咋样,帮俺的翻一下,让老外也试试好不好用:d
Click to expand...
Click to collapse
哈,偶不ROOT 了, 正打算用XBSA 的root后bin ,省事哈! 楼上已经有机翻版, 一愣一愣的大概意思有就行啦. 哒哒的功劳给你拿了哈!! 幸好他的好基友能用 LG 的内部 IP, 不然这个 V28B 还不是跟上回的V30a 一样昙花一现的屎去~~
zlmbbl said:
方法一:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5921011&extra=page=1
http://bbs.gfan.com/forum.php?mod=viewthread&tid=5920533
方法二:
大家现在的ROOT方法是要解BT锁,但都知道解BT锁会影响底层性能,用段时间会导致偶尔卡顿触屏不灵等现象,这都是因为第三方BT锁的兼容性引起的,下面说说我个人的见解及步骤:
1、先把已经刷好国际版并解锁ROOT后的系统用RE备份一个,后面有用
2、再刷移植版的4.04
3、按照移植版的ROOT方法先把手机系统给ROOT了
4、不要解锁刷入RE(注意必须是不要解锁状态下刷入RE)
5、再把第1步备份的国际版系统恢复到手机里
6、后面该怎么做大家应该都知道了吧
因为本人这段时间工作太忙,连4.04都没时间刷,怕因为手机影响工作,所以还得需要有时间折腾的机油努力
又想到了另一种方案:
1、刷好国际版并解锁ROOT(这一步相信大部分机油都已经做了)
2、用救砖工具刷回官方的BootLoader(或者把救砖工具里的LG官方BT文件,扩展名为bin,替换掉解BL锁工具的目录里替换,再用解锁工具去再一次解锁,实际是刷回官方的BT文件)
下图中左边是救砖用的LG官方BT文件在omap4boot-for_optimus-v1.16压缩包里,右边是第三方的兼容BT文件在[All-In-One][P920]压缩包里,把左边的文件刷回系统去就相当于把BT锁还原到官方了
Click to expand...
Click to collapse
lw_wl said:
啥时候有简单点的方法呀? 不弄底层行不行?
Click to expand...
Click to collapse
zlmbbl said:
哈哈,你也在这里啊,英文咋样,帮俺的翻一下,让老外也试试好不好用:d
Click to expand...
Click to collapse
lw_wl said:
哈,偶不ROOT 了, 正打算用XBSA 的root后bin ,省事哈! 楼上已经有机翻版, 一愣一愣的大概意思有就行啦. 哒哒的功劳给你拿了哈!! 幸好他的好基友能用 LG 的内部 IP, 不然这个 V28B 还不是跟上回的V30a 一样昙花一现的屎去~~
Click to expand...
Click to collapse
hey come on we re all from different countries but speak english wtf
MastaZz said:
hey come on we re all from different countries but speak english wtf
Click to expand...
Click to collapse
gee! that's just what he worry about!! calm down brother! he got the ideas on rooting the new v28b! but he has no idea how to
put them in english.
well, imo, why wasting time on testing this ideas, while we already have the prerooted bin. and it got TWRP too! so no need to take the risk and to translate anything here.
Sent from my XBSA ICS V7.2 基于V28B using xda premium
lw_wl said:
gee! that's just what he worry about!! calm down brother! he got the ideas on rooting the new v28b! but he has no idea how to
put them in english.
well, imo, why wasting time on testing this ideas, while we already have the prerooted bin. and it got TWRP too! so no need to take the risk and to translate anything here.
Sent from my XBSA ICS V7.2 基于V28B using xda premium
Click to expand...
Click to collapse
You don't even need a prerooted rom.
You can flash official v28b and on top of it flash 1.25a wkparks bootloader and twrp.Then in twrp you flash su and it's done.
Xbsall made a good rom but I like stock better so...
My chineese is bad, could someobody translate this for me.XD
Sent from my LG-P920 using xda app-developers app
jocazmaj said:
You don't even need a prerooted rom.
You can flash official v28b and on top of it flash 1.25a wkparks bootloader and twrp.Then in twrp you flash su and it's done.
Xbsall made a good rom but I like stock better so...
My chineese is bad, could someobody translate this for me.XD
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
The Prerooted V28B ROM IS FACTORY STOCK with ROOT.
I guess some guys will never understand that.
Send from my LG-P925 XBSA VX3D.
lw_wl said:
but he has no idea how to
put them in english.
Click to expand...
Click to collapse
sorry I forget that google translation has not been invented yet
MastaZz said:
sorry I forget that google translation has not been invented yet
Click to expand...
Click to collapse
oh and it works so damn flawlessly that you are willing to try whatever the result of gtranslate is on your phone knowing that whoever did the translation has no way of checking the output being correct?
jimakos29 said:
oh and it works so damn flawlessly that you are willing to try whatever the result of gtranslate is on your phone knowing that whoever did the translation has no way of checking the output being correct?
Click to expand...
Click to collapse
you don't even deserve an answer ....
MastaZz said:
you don't even deserve an answer ....
Click to expand...
Click to collapse
well you didn't either but I did get into trouble answering you.... and anyway you accuse him of being too lazy to use google translate, but why? cause you are too lazy to use it yourself and translate what he posted and want it all ready served on the plate.
Where is the Michael Jackson popcorn gif when you need it Man this forum is on edge today.
jimakos29 said:
well you didn't either but I did get into trouble answering you.... and anyway you accuse him of being too lazy to use google translate, but why? cause you are too lazy to use it yourself and translate what he posted and want it all ready served on the plate.
Click to expand...
Click to collapse
ok let's everybody use his own language and make this forum unreadable :good: , I accuse nobody , stop trying to be a hero , if this guy has something to say because I TALK TO HIM , NOT TO YOU , I'm sure he will PM me , you have nothing to do with it so now you can stop to be annoying
xbsall said:
The Prerooted V28B ROM IS FACTORY STOCK with ROOT.
I guess some guys will never understand that.
Send from my LG-P925 XBSA VX3D.
Click to expand...
Click to collapse
You missed the point man.
I didn't say anything about your prerooted rom, I just said that there is an easy way to get the stock rom rooted if you want.
Some people like stock roms and don't want to experiment to much,if you know what i mean.
Not me though. XD
By the way I totally support your work and I'm glad that you do, what you do.:thumbup:
Sent from my LG-P920 using xda app-developers app
---------- Post added at 02:03 AM ---------- Previous post was at 01:58 AM ----------
MastaZz said:
ok let's everybody use his own language and make this forum unreadable :good: , I accuse nobody , stop trying to be a hero , if this guy has something to say because I TALK TO HIM , NOT TO YOU , I'm sure he will PM me , you have nothing to do with it so now you can stop to be annoying
Click to expand...
Click to collapse
We should use ESPERANTO from now on!
Sent from my LG-P920 using xda app-developers app

[GUIDE] ROOT INSTRUCTIONS + Enable Developer options Read BEFORE you attempt root!!

**WARNING: BY ROOTING YOUR PHONE AND FOLLOWING THESE INSTRUCTIONS YOU ACKNOWLEDGE THAT YOUR WARRANTY WILL BE VOID. I AM NOT RESPONSIBLE FOR ANY DAMAGES RESULTING FROM THIS OPERATION**​
This guide is intended to prevent some adventurous new Galaxy S 4 owner from bricking their brand new phone
DO THIS BEFORE CONNECTING YOUR PHONE TO YOUR COMPUTER FOR THE FIRST TIME​
This is also the future home of the collection of kernels, ROMs, Mods, etc that will be in development in the near future (hopefully).
Adam Outler and crew are currently trying to unlock the AT&T Galaxy S 4 bootloader. Please go to their thread and show their THANKS buttons some love.
HOWEVER, DO NOT POST IN THIS THREAD UNLESS YOU ARE CONTRIBUTING TO THEIR R&D!!
READ "The rules" IN THE OP​
This method of root was exploited by djrbliss. Please visit the original thread and thank him by any means you see fit.
This is not done through download mode or recovery, so don't worry about any button combos. The phone just needs to powered on and running the way you would normally use it.
First things first. You should begin downloading the files you'll need later on.
Download the latest Samsung USB Drivers and the Root Exploit Executable
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Begin installing the Samsung USB Drivers.
It can appear that the installer program isn't doing anything for a while so just be patient.
When the motochopper.zip file finishes downloading
right-click on it and select Extract All...
I usually just leave it at the default location and click Extract
It should finish this fairly quickly. When it does finish, open the motochopper folder in the resulting window. You can now ignore this window until you need it later.
For the sake of efficient use of time, while the drivers are being installed and motochopper.zip is being extracted, you should turn your attention to the phone itself. It needs to be prepared for being connected to your computer for the first time.
USB debugging within Developer options needs to be enabled to use this exploit. There are some that would say that if you don't know how to do this, you shouldn't be in the development forums. To them I say, "Everyone had to learn from somewhere. WHY NOT HERE??" :laugh:
To enable Developer options, open Settings and click on the "More" tab, then "About device". Mine shows where Developer options will be after doing this.
Near the bottom is an entry called "Build number", click on it repeatedly (7 times) until a toast pops up telling you that developer mode is on.
Press the back softkey and click on "Developer options". If you don't see it, you didn't click the "Build number" enough times.
DO NOT CHANGE ANY ENTRIES IN THIS SECTION WITHOUT KNOWING WHAT THEY DO FIRST!!​
Click on USB debugging
click OK on the "Allow USB debugging" window that pops up.
When the Samsung USB Drivers are finished installing, connect the phone to your computer using the USB cable that came with your phone. Windows Update should start looking for software for your phone immediately as indicated by the popup window that appears at the bottom-right of your screen when you have your phone connected to the computer. You can click on this window to watch it's progress, or simply wait for the next one telling you that your device is ready to use.
After you see this dialog, go back to the folder that opened when you extracted motochopper.zip and double-click on the file named run.bat
and click Run on the dialog window that pops up.
when the command line window appears, press enter to begin rooting your phone.
A dialog window will appear on your phone asking you for permission to let ADB execute commands. Click OK.
when the rooting process finishes, press enter to reboot the phone and close the command line window.
**YOUR PHONE IS NOW ROOTED AND YOU CAN USE APPS THAT REQUIRE ROOT**​
reserving this post. Is the sharing feature on Google Docs not compatible with the IMG tag on this forum?
no offense but the OG thread does a good job of explaining it i dont see the need for this one? so im not sure what the intentions are?
howtomen said:
no offense but the OG thread does a good job of explaining it i dont see the need for this one? so im not sure what the intentions are?
Click to expand...
Click to collapse
Agreed - except for "enabling Developer options and USB Debugging" which I thought might be good in the OP of the "real" thread (and frankly is not called out well in this OP), this doesn't seem to add anything.
No need to clutter the Development thread with guides, thats what General is for. I'm sure this will help someone but its still in the wrong section unless you have a kernel or rom to post.
Thread moved, post in accordance with XDA rules, thanks and enjoy the new phone.
I posted it here because this is where people trying to root their phone will look. Thanks for the kind words of encouragement. It makes the 6+ hours I spent on it all worth it, even after none of my screenshots showed for some reason.
kevnuke said:
I posted it here because this is where people trying to root their phone will look. Thanks for the kind words of encouragement. It makes the 6+ hours I spent on it all worth it, even after none of my screenshots showed for some reason.
Click to expand...
Click to collapse
dude 6 hours on a guide with screenshots? chillax we were just saying u went above and beyond to provide info that is simply already there... and people should look at all forums for a root method. also... no way this should take 6+ hours man dont trip
howtomen said:
dude 6 hours on a guide with screenshots? chillax we were just saying u went above and beyond to provide info that is simply already there... and people should look at all forums for a root method. also... no way this should take 6+ hours man dont trip
Click to expand...
Click to collapse
Thanks for the clarification. This is my first guide and I had to figure things out as I went. Any idea why the pictures didn't work? I used the IMG tag.
Swyped from the 4th Galaxy on XDA Premium
kevnuke said:
Thanks for the clarification. This is my first guide and I had to figure things out as I went. Any idea why the pictures didn't work? I used the IMG tag.
Swyped from the 4th Galaxy on XDA Premium
Click to expand...
Click to collapse
your images didnt show because you used Google to share them, you need the direct image URL and google wont give you that. Try image shack or something like that. its what i use when hosting images.
XsMagical said:
your images didnt show because you used Google to share them, you need the direct image URL and google wont give you that. Try image shack or something like that. its what i use when hosting images.
Click to expand...
Click to collapse
Thanks I'll fix it tomorrow after work.
EDIT: Links updated last night.
Swyped from the 4th Galaxy on XDA Premium
Good evening,
I have been trying to room my AT&T i337 for 3 days now and have failed every time. I have enabled developer but NEVER get the popup on my phone to approve ADB connection. The motochopper script fails each time. Is there something I am missing? This is getting to be a problem because I need to be able to run WIFI Tether for work.... Help!
fsimmler said:
Good evening,
I have been trying to room my AT&T i337 for 3 days now and have failed every time. I have enabled developer but NEVER get the popup on my phone to approve ADB connection. The motochopper script fails each time. Is there something I am missing? This is getting to be a problem because I need to be able to run WIFI Tether for work.... Help!
Click to expand...
Click to collapse
Are you using a new or known good cable? Try re downlooading the zip.
Make sure you extracted the zip. Remove and reinstall device drivers.
Have you tried foxfi in the playstore?
I'm not rooted and it works for me?
Sent from my SAMSUNG-SGH-I337 using xda premium
Well... Yes, I have tried them all, and some.
sptrsn said:
Are you using a new or known good cable? Try re downlooading the zip.
Make sure you extracted the zip. Remove and reinstall device drivers.
Have you tried foxfi in the playstore?
I'm not rooted and it works for me?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Thank you for the fast response. I am using the USB that came with the phone. I have tried multiple USB ports on my computer and have gotten the Motochopper file from 3 different locations. I have downloaded the USB driver from Samsung twice and installed. I even tried 2 different computers. I am at wits end....
I wrote Foxfi to see if this phone is compatible and hope they respond shortly.
Thanks,
Fred
Fixed missing ADB connection
Wow, I seemed to have fixed the problem myself by chance. I executed the adb.exe file in the Motochopper folder as a stand alone (a few times in fact) and the next time I connected my phone I got the pop-up to accept and was able to root it! In all the posts I have read, not once has anyone mentioned this. Wow, rooted at last! Thanks! :laugh:
fsimmler said:
Wow, I seemed to have fixed the problem myself by chance. I executed the adb.exe file in the Motochopper folder as a stand alone (a few times in fact) and the next time I connected my phone I got the pop-up to accept and was able to root it! In all the posts I have read, not once has anyone mentioned this. Wow, rooted at last! Thanks! :laugh:
Click to expand...
Click to collapse
In the attempts before that, did the command line window even open when you tried to run the batch file?
EDIT: Typo
Swyped from the 4th Galaxy on XDA Premium
Something that neither root guide mentions in the OP is that you might also need to disable "Verify apps via USB." It was disabled the first time I rooted, but it was enabled after I did a factory reset and rooted again. If root is failing, see if that option is checked and uncheck it if it is.
Can't attach or post a link, yet, or I'd include a an actual link to a screenshot. URL here: i.imgur.com/Ord8xxj.png
fsimmler said:
Wow, I seemed to have fixed the problem myself by chance. I executed the adb.exe file in the Motochopper folder as a stand alone (a few times in fact) and the next time I connected my phone I got the pop-up to accept and was able to root it! In all the posts I have read, not once has anyone mentioned this. Wow, rooted at last! Thanks! :laugh:
Click to expand...
Click to collapse
now that you are rooted...what is your next move? just out of curiosity.
TheAxman said:
now that you are rooted...what is your next move? just out of curiosity.
Click to expand...
Click to collapse
People usually install Titanium Backup next and use it to remove bloatware.
Swyped from the 4th Galaxy on XDA Premium.
kevnuke said:
Thanks for the clarification. This is my first guide and I had to figure things out as I went. Any idea why the pictures didn't work? I used the IMG tag.
Swyped from the 4th Galaxy on XDA Premium
Click to expand...
Click to collapse
succesfully

[CLOSED]Installing apps on a gabb phone Z2?

PLEASE GO TO THE NEW FOURM POST
[NEW] Installing apps on a Gabb Phone Z2?
YOU CAN NOW ACCESS THE INTERNET ON YOUR GABB PHONE. However, you still can't mod or get apps on it. Here's a tutorial on how to access the internet. Video Tutorial made by Hezy: Tutorial may not be current, so check the text tutorial. Text...
forum.xda-developers.com
[ORIGINAL POST]Obviously, yes, the gabb phone is meant for little kids and such for their first phone. However, it definitely is running android, and probably could be tampered with. If you're wondering what I really need, I mostly talk to people using discord.
Here's what I've tried so far. There is no way (from the file manager) to install .apk files. All it does is tell me that there's no app to open the file with. I have also tried to head over to the bootloader, by holding down the power button and volume down button. I'm fine with no social media, but there is wifi on it, so I was assuming if I could find a way to just get an apk on there, then it would work fine. Also, with the new update, you can see more folders of the phone instead of the standard, PTP thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't enable developer settings or anything like that. Looks like they've done a good job locking it down.
If anyone has ANY idea at all of how to install apps of any kind on this, please reply.
YOO NIKKO IDK HOW I FOUND U BUT I DID LMAO. I WAS GOOGLING HOW TO INSTALL LIKE APPS ON THAT PHONE JUST IN CASE I GET IT FOR MY FIRST PHONE AND THIS POPPED UP LMAOOOOO
Well if you are reading this, look up how to watch youtube on gabb phone tutorial to learn how to transfer files. If you download an apk on computer, go to computer, press show in folder after downloading apk, copy the file, plug in the charging cord to the gabb and a pc usb, and press this pc in your files, gabb phone, downloads, and paste it. If you go into my files on your gabb, you can go to it but there is no package installer, and if you could download a software or something similar to a package installer, than you could download any app.
It says no app to run this
Nikο said:
Obviously, yes, the gabb phone is meant for little kids and such for their first phone. However, it definitely is running android, and probably could be tampered with. If you're wondering what I really need, I mostly talk to people using discord.
Here's what I've tried so far. There is no way (from the file manager) to install .apk files. All it does is tell me that there's no app to open the file with. I have also tried to head over to the bootloader, by holding down the power button and volume down button. I'm fine with no social media, but there is wifi on it, so I was assuming if I could find a way to just get an apk on there, then it would work fine. Also, with the new update, you can see more folders of the phone instead of the standard, PTP thing.View attachment 5158557I can't enable developer settings or anything like that. Looks like they've done a good job locking it down.
If anyone has ANY idea at all of how to install apps of any kind on this, please reply.
Click to expand...
Click to collapse
Maybe if you could run an emulator or jailbreak the gabb phone. Maybe if you could transfer a apk installer file from your computer. Maybe through downloading some app or game on an sd card on a different phone and then putting the sd card in the gabb phone. Maybe you could download android software and transfer it to the phone. If you could run an android emulator that would be the best option.
Iqlessmemes said:
Maybe if you could run an emulator or jailbreak the gabb phone. Maybe if you could transfer a apk installer file from your computer. Maybe through downloading some app or game on an sd card on a different phone and then putting the sd card in the gabb phone. Maybe you could download android software and transfer it to the phone. If you could run an android emulator that would be the best option.
Click to expand...
Click to collapse
how do you do that?
So, I have figured out how to access recovery mode. But you are not able to access the bootloader from there, although you can update from an sd card or adb debugging if u know-how.
Caden.exe said:
YOO NIKKO IDK HOW I FOUND U BUT I DID LMAO. I WAS GOOGLING HOW TO INSTALL LIKE APPS ON THAT PHONE JUST IN CASE I GET IT FOR MY FIRST PHONE AND THIS POPPED UP LMAOOOOO
Click to expand...
Click to collapse
PLEASE HELP ME I NEED TO KNOW MY DUDE
I found a file in android known as .nomedia it might have something to do with it.
You may be right, because The use of naming a file NOMEDIA is to keep the device from scanning that particular folder. Apps sometimes hide ads in that folder so they don't get deleted. So gabb may be hiding crucial files in that folder, although you will need an external app to manage NOMEDIA utilities. such as studiokuma.
I have noticed that when you hard reset your gabb phone it will show make you agree to the terms of service. if you click read terms of service it will take you to a the ZTE page, but upon closer inspection it is in a web browser, where you can acces youtube, instagram, etc.. BUTTTT you cannot login to your google play account because the keyboard is disabled.
Just wondering if anyone has made progress on this? I have tried almost everything at this point
Tried unlocking bootloader from fastboot (I get `Unlock failed` errors on the device side. Something about it be not allowed?)
Right now my goal is to get USB debugging enabled and go from there
I have basically tapped every setting at least 100 times and still no debug mode
You all are going to laugh at me but I contacted Gabb claiming my son (me) has figured out how to download apps onto the Gabb phone and the assistant lady was all supprised and was like can you send me a picture and so I was like my son is not letting me. Anyways she said she was going to escalate it with her supervisor so like that I know how to do it. Once I know how you all will be the second peoples to know!
bartd990 said:
You all are going to laugh at me but I contacted Gabb claiming my son (me) has figured out how to download apps onto the Gabb phone and the assistant lady was all supprised and was like can you send me a picture and so I was like my son is not letting me. Anyways she said she was going to escalate it with her supervisor so like that I know how to do it. Once I know how you all will be the second peoples to know!
Click to expand...
Click to collapse
Can someone create a phone edited image of it so I can get an answer?
bartd990 said:
Can someone create a phone edited image of it so I can get an answer?
Click to expand...
Click to collapse
enjoy
herosilas12 said:
enjoy
Click to expand...
Click to collapse
Thanks so much! Waiting for a responce now
bookreader164 said:
So, I have figured out how to access recovery mode. But you are not able to access the bootloader from there, although you can update from an sd card or adb debugging if u know-how.
Click to expand...
Click to collapse
I am currently stuck around this part as well. I was able to reboot into recovery mode by holding the power and volume up button till the screen starts up. I attempted using adb debugging's install command (can be found here), but I ran into a "server client error", notifying me that the server client versions don't match up. I have no idea what that means. I will need to do some further research, but this is what I have so far to contribute to our "noble" cause.
P.S. I forgot to take screenshots of the errors (my bad), but I'll do some research on adb then try again and share the errors (hopefully no errors).
kilijan853 said:
I am currently stuck around this part as well. I was able to reboot into recovery mode by holding the power and volume up button till the screen starts up. I attempted using adb debugging's install command (can be found here), but I ran into a "server client error", notifying me that the server client versions don't match up. I have no idea what that means. I will need to do some further research, but this is what I have so far to contribute to our "noble" cause.
P.S. I forgot to take screenshots of the errors (my bad), but I'll do some research on adb then try again and share the errors (hopefully no errors).
Click to expand...
Click to collapse
Did you get it into proper ADB mode or just ADB sideload mode?
I have a stock FW image that I could maybe patch to have USB debugging enabled
Only issue is I can't flash it because the bootloader is locked
DMikesell12 said:
I found a file in android known as .nomedia it might have something to do with it.
Click to expand...
Click to collapse
Hi,
The .nomeadia file is a config file that allows you to hide/show gallery albums. It in no way is connected to the topic.
Cheers!
herosilas12 said:
Just wondering if anyone has made progress on this? I have tried almost everything at this point
Tried unlocking bootloader from fastboot (I get `Unlock failed` errors on the device side. Something about it be not allowed?)
Right now my goal is to get USB debugging enabled and go from there
I have basically tapped every setting at least 100 times and still no debug mode
Click to expand...
Click to collapse
How did you get the "Unlock failed" error?
The only options are:
1. Reboot System Now
2. Enter Recovery
3. Reboot to bootloader
4. Power off

Categories

Resources