Here are all the steps to root and install a custom recovery on your X710D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Download files HERE
2. Extract 'Android flash' anywhere to your desktop
3. Open the folder within called 'USB VCOM Driver' and chose the folder then file that is your operating system (the .inf) and paste it to your desktop
4. Pull the battery out of your phone and connect the phone to you computer whilst holding the volume up button
5. Open device manager. You should see your phone (it re-appeared every 5 seconds for me). Right click on your phone and press update driver, then browse manually for the .inf file you put on your desktop. Once you've done that disconnect your phone
6. Open 'Android flash' and open Flash_tool and select all the files to make it look like the picture below
7. Press download, then plug in your phone whilst pressing volume up button
8. Done! You now have CWM and have rooted your phone! There are also some other apps that are added too
If you are having issues with your IMEI code read this post here: http://forum.xda-developers.com/showpost.php?p=30534835&postcount=32
There's also a issue with external sd cards which is currently being worked on. (phone can't write to sd card. if you attempt, phone reports sd card as damaged and sd card will need to be re-formatted)
Big thanks to yiminghung, he helped me figure out how to do it.
If I've made any errors in this please tell me I will fix asap, and if anyone has any updates/ROMs, please message me and I'll post them here.
Looks Good!
additional information
for additional information look here:
http://forum.xda-developers.com/showpost.php?p=30534835&postcount=32
good work!
help for the mtk6577 n9770
Hi,
Please help me
This is what happen first
After I root the phone (n9770 mtk6577) then wipe all data from user and system apps the camera now doesnt work, I press the app and is in black, I dont know if it is the boot image rooted is giving me the problem but I flash again the original boot image and get nothing the same, then I did a factory reset and is same no camera, maybe is not software faulty but hardware? I will try reflashing the stock rom 4.0.9, could you give me some direction on how to flash because I used SP_Flash_Tool_v3.1222.00 and i have installed the usb driver for win 7 64bit, please let me know what direction I should follow.
Now is what i have done after that
I have flash with the tool the custom recovery but I did not read that i had to uncheck boot and preloader, and now the phone is not booting, pleasee pleasee help me
I have donwload the rom but i dont know how to reflash or simply fix the preloader issue
ztrike said:
Hi,
Please help me
This is what happen first
After I root the phone (n9770 mtk6577) then wipe all data from user and system apps the camera now doesnt work, I press the app and is in black, I dont know if it is the boot image rooted is giving me the problem but I flash again the original boot image and get nothing the same, then I did a factory reset and is same no camera, maybe is not software faulty but hardware? I will try reflashing the stock rom 4.0.9, could you give me some direction on how to flash because I used SP_Flash_Tool_v3.1222.00 and i have installed the usb driver for win 7 64bit, please let me know what direction I should follow.
Now is what i have done after that
I have flash with the tool the custom recovery but I did not read that i had to uncheck boot and preloader, and now the phone is not booting, pleasee pleasee help me
I have donwload the rom but i dont know how to reflash or simply fix the preloader issue
Click to expand...
Click to collapse
doppelpost!
see here
http://forum.xda-developers.com/showpost.php?p=30604249&postcount=40
Getting warning message "not all images are correctly loaded"
Followed all step to the "click Download", when i click download a warning dialog tells me that not all images are correctly loaded, which may cause boot up issue!, do I want to continue"
I have checked many times and all images are set as you have shown in your screen shot?
Any Idea what is not right?
Edit: it appears to be caused by DSP_BL not being selected??
info
hi
may I ask an information.
I'm going to buy a zp900 9300+ is a clone of the zoppo zp900
with mtk6577 and 512mb of ram... with android 4.1.1
do you think is possible to use the same procedure for the root
of the phone? do I have to uncheck something? or change any file?
thanks
Antonio
paperinik77 said:
hi
may I ask an information.
I'm going to buy a zp900 9300+ is a clone of the zoppo zp900
with mtk6577 and 512mb of ram... with android 4.1.1
do you think is possible to use the same procedure for the root
of the phone? do I have to uncheck something? or change any file?
thanks
Antonio
Click to expand...
Click to collapse
i bought the same phone and would love to know if this root method works for this phone, it has the same MTK6577 CPU as the haipai X710D
Hi all. I am a new registered. My name is Filippo and I'm Italian (sorry for my English googltraslate).
In a few days I will come to me x710d. I wanted to ask you questions.
1) What improvements does the root of the phone? Have to wait at the root with the update to Android 4.1 bj?
2) Before you root, I have to make a backup / image of the system for use in case I have a problem? If it is, how should I do it?
3) This root change the size of the internal memory or I'll do it later? In the second case, how can I swap the memory card with the internal one?
The last question is that there is risk in doing these operations? You advise me to do to its?
Excuse my inexperience and thank you all in advance.
Thank you so much for posting this. The Flash tool is quite confusing to use. Your instructions really helped.
---------- Post added at 11:30 AM ---------- Previous post was at 11:26 AM ----------
Technica said:
Followed all step to the "click Download", when i click download a warning dialog tells me that not all images are correctly loaded, which may cause boot up issue!, do I want to continue"
I have checked many times and all images are set as you have shown in your screen shot?
Any Idea what is not right?
Edit: it appears to be caused by DSP_BL not being selected??
Click to expand...
Click to collapse
Just click "YES". you dont have to check any of the images.
Hi, i´m seller of this model ( X810d ) and it work´s like a charm too!
Thanks so much!
WWW.HIPHONEBRAZIL.BLOGSPOT.COM
Filippo.digi said:
Hi all. I am a new registered. My name is Filippo and I'm Italian (sorry for my English googltraslate).
In a few days I will come to me x710d. I wanted to ask you questions.
1) What improvements does the root of the phone? Have to wait at the root with the update to Android 4.1 bj?
2) Before you root, I have to make a backup / image of the system for use in case I have a problem? If it is, how should I do it?
3) This root change the size of the internal memory or I'll do it later? In the second case, how can I swap the memory card with the internal one?
The last question is that there is risk in doing these operations? You advise me to do to its?
Excuse my inexperience and thank you all in advance.
Click to expand...
Click to collapse
nobody can help me?
silvacrest said:
i bought the same phone and would love to know if this root method works for this phone, it has the same MTK6577 CPU as the haipai X710D
Click to expand...
Click to collapse
i've just got this model too
great work
i've just want to know how to root it
Success or Failure
I have tried many ways\suggestions to root my X710D and this is the only one I have not yet tried.
Before I do try this procedure It would be helpful if people that have done this on the X710D could report their success or failure.
I would like to know this because I do not know enough and do not want the get into more trouble with the device.
Thanks for sharing your experiences....
I successfully rooted my x710d using the steps given. Before I rooted my phone, I updated it to the latest 4.0.9 (latest firmware is in another forum read here).
This root also comes with the custom recovery (probably taken from HTC because there is an HTC boot screen logo). However, I encountered three main problems after the I successfully executed everything.
First, my IMEI got erased (solved this using ZOPO). (read here there is an explanation how to put your IMEI's back. )
Second, external Sd-card gets no write permissions and also it errors damaged sd-card from time to time (still finding ways to solve this).
Third; Since, I live in Japan, I am still finding ways how to enable MMS on this thing through sofbank.
for the good side;
Rooted phone is awesome.
This phone is quite fast for its price especially with the new firmware.
Sofbank APN settings where automatically there already (I dunno if this was because of ICS or X710d firmware just came in with these settings). Everything else is working very well. Camera, Bluetooth, GPS, WIFI, Radio, etc....
GreatPharaoh Thanks for such a clear and detailed post, this is what makes XDADevelopers such a great community.
Your reply is just what I needed to hear, me being new to this platform.
I purchased one of these as a development machine with the intention of using it as my phone also, but I had been highlighted that some sellers just are not in a position to support the products they sell. We also order two more from another seller to edge our bets on delivery times, but when we discovered some issues and the second seller also demonstrated that they have poor after sales support when managed to cancel these additional two X710D (with an insulting response from this seller).
I my case I asked very specific questions about the product and got nothing but positive replies before purchase, in addition I needed the device to have a working compass and magnetic sensor which also received a "Yes" but once we confirmed payment communication with the delivery and questions dried up. Once delivered, we found that while the X710D does have a Compass and Magnetic sensor they are not implemented.
Now we are concerned about the IMEI bug and these seller does not want to know about it.
So, while we accepted some risk in purchasing a Chinese phone at reasonable price, we really are concerned about this model and did not anticipate the amount of risk.
Now being a software developer (not Android or Linux) I had the approach the we can fix anything, but at this time in a new OS world it has proven to be again high risk and we can not afford to brick this device. So we have decided to return it for a refund.
I will continue to monitor these posts, because I am keen to see if things get resolved and to learn from the experiences of others. It is great to see many members with far greater skills than mine helping each other.
I have also had great hand-holding from ColonelZap through some of out attempts to resolve these issues, so a huge thanks to him.
Again thanks GreatPharaoh for a great post and I am sure that it will help others looking at the X710D and maybe they will find a solution to your remaining issues.
Technica
GreatPharaoh said:
I successfully roThamy x710d using the steps given. Before I rooted my phone, I updated it to the latest 4.0.9 (latest firmware is in another forum read here).
This root also comes with the custom recovery (probably taken from HTC because there is an HTC boot screen logo). However, I encountered three main problems after the I successfully executed everything.
First, my IMEI got erased (solved this using ZOPO). (read here there is an explanation how to put your IMEI's back. )
Second, external Sd-card gets no write permissions and also it errors damaged sd-card from time to time (still finding ways to solve this).
....
Click to expand...
Click to collapse
The X710D is a copy of the HTC Evo 4g LTE which will explain the boot logo.
Thank you for mentioning the sd card issue, i bought a rather expensive 32gb class 10 card to find it didnt work in my phone. Its very difficult to get it to work and when it does work my phone cant write to it. If you find a fix ill update the maim post.
Ive noticed lots of people mentioning issues with their imei codes. I havent come across this issue but there is a fix at post 3. Ill update the main post with it later.
Im posting from my phone sp sorry for typing errors. Whats th best keyboard for this phone? Im currently usibg swype but as you can see its.pretty bad. The defaultkeyboard it even more difficult to type.on
x710d sd card issue
jaw2floor said:
The X710D is a copy of the HTC Evo 4g LTE which will explain the boot logo.
Thank you for mentioning the sd card issue, i bought a rather expensive 32gb class 10 card to find it didnt work in my phone. Its very difficult to get it to work and when it does work my phone cant write to it. If you find a fix ill update the maim post.
Ive noticed lots of people mentioning issues with their imei codes. I havent come across this issue but there is a fix at post 3. Ill update the main post with it later.
Im posting from my phone sp sorry for typing errors. Whats th best keyboard for this phone? Im currently usibg swype but as you can see its.pretty bad. The defaultkeyboard it even more difficult to type.on
Click to expand...
Click to collapse
did you get a chance to see what the fix is for sd card problems? its driving me crazy
Lost IMEI on x710D
Is this issue of losing IMEI only related to the X710D or is this a common problem with Chinese Android phones?
Once again, deepest Thanks to Jaw2Floor for posting the steps.
@Technica; yup, I couldn't agree with you more about these sellers. Seems like these phones where probably manufactured in someones old garage with one or two developers who couldn't do much english. And they would just send em to these vendors for retail. These sellers, However, are so smart with marketing, they would flood youtube and google with fake reviews (although most of em are just unboxings) and lead us with just curiosities. This is probably why they are so good at selling but very bad in support. Long story short, we are only paying for the hardware here.
For the Imei case: I wonder why everyone is not having this problem..?. Maybe this is also hardware related. This was the first problem I faced right after my first ever Factory Default Reset on the phone. I was so terrified that moment, I thought I bricked or fried the modem.
The Sd-card issue is still there: "My temporary fix is reformat card in PC and recopy your media. Do this every time you get the damaged sd-card error."
I can access my card with read permissions only. My media gallery and other media apps can see the card and the contents. However, as soon as I start to write the card (e.g. making new folder or deleting a file from any file explorer app) the "Damaged sd-card error" will start to appear and you wont be able to get rid of this until you take the card out, format it in your PC, recopy all your media, then mount it again in your x710d. This is what ive been doin for the past couple of days to enjoy music in this phone.
The Headphone Jack is also too deep. If you compare side by side the stock headphone/mic with any other regular headphone, this one came in with a much longer jack. I was able to fix this problem by widening the headphone hole on the phone's back casing and also splicing an mm of rubber on my regular headphone jack.
The stock Email-app are having problems setting up with Yahoo's mail servers. So, im using K-9 mail for now.
As for now, I am enjoying this phone. I get a lot of eye's whenever I take this out of my pocket in Tokyo trains. Its not a note! Its the money-saver version.
Related
Hi all;
My name is Dean and i have strange problem with my PDA.
The device is bought in Thailand in 2006 during my visitation to the country, originally I'm from Serbia.
PDA device is: O2, XDA Zinc, Windows Mobile 5.0 [English language]
On my laptop i have ActiveSync 4.5.0 installed and broadband internet connection.
Here is description of problem:
I wanted to connect my PDA device to my laptop using USB data cable, so i could have internet on it, but here is what happened.
I plug the cable to the device and my activesync didn't recognize the device. Instead strange error appeared on the display, saying "can not execute Mobilerss.exe" and then OS just freeze. I unplugged the device, preformed soft reset but this time i didn't plug in the cable, and again error showed and OS freezes.
With OS frozen like this i couldn't do anything... even the backlight went off and it wont turn on when i press button or tap the touch screen!
I though it would be good to uninstall mobile rss application which causes the problem, and because i don't use it wont be a problem, so i tried to do it, but i couldn't. [Maybe i didn't know how] so i deleted the app folder from the program files manually.
After that i hoped that i solved the problem but i was surprised to see the same error again!!! I did hard reset, even that didn't help...
I got one suggestion to try uninstall activesync and install older version, so i did that... I used 4.2 this time but error was still there, same message on the screen etc...
Now, what ever i do, plug or unplug the cable, preform soft or hard reset OS just freezes and i cant do anything...
Im running out of options so i ask for help of all you people.
If you need more details and i can provide them just ask, no problem.
Thank you in advance for any suggestion...
Dolke
What I Would Suggest To You Is Upgrade To A New Rom.
I Have Error's Like That Before On My WM5 on My o2 Zinc II
Upgrade To WM6 Official o2 Rom Still Has Bugs But I Upgraded my Rom Again to WM6.1 Cruzzmz Rom And its Working
Download His Rom Here:
Code:
http://forum.xda-developers.com/showthread.php?t=402283&highlight=zinc
Follow Cruzzmz Instrution:
HOW TO FLASH UR ZINC ROM
--------------------------------------------------------------
1. Copy MarsII_G4.ABI file to ur MiniSD card (card must be less than 4G)
2. Plug usb wall charger to your Zinc
3. Push/Hold ur Right arrow Dpad button & do Soft Reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Zinc will reboot & will be in 3 color boot screen
5. See progress of updating
6. Zinc will reboot after finished updating
________________________________________________________________
It Works Fast On Mine! It Should Do Just Fine On Urs
I flashed it...
I got that boot screen image, the green wm6, and than i was asked to tap the screen. Screen align program started and i'm stuck, i can't turn it off or enter home windows screen!
Help please
Try to reflash it one more time. Make sure that you are following ashburn's instructions properly since you have a chance of bricking the device if you don't follow procedure...
egzthunder1 said:
Try to reflash it one more time. Make sure that you are following ashburn's instructions properly since you have a chance of bricking the device if you don't follow procedure...
Click to expand...
Click to collapse
I did it again... followed every instruction written above but i just stopped at same place... Activesync recognizes the device, and the green LED blinks... but i cant get out of alignment application and see the home screen in WM..
I even tried to flash the device with older crumzz ROM - 19202-Xlt but OS stopped at same place - align app! Don't have a clue why is this happening ???
Are you leaving your device connected to the computer after its done with the flashing? It might be that AS is trying to sync with the device while it is setting up all the initial files and such...
After you are done flashing, try to disconnect the device from the computer, so that you no longer have interference from AS.
Alternatively, you could try to flash a stock rom. That normally solves a few issues here and there.
Good luck.
egzthunder1 said:
Alternatively, you could try to flash a stock rom. That normally solves a few issues here and there.
Click to expand...
Click to collapse
First, thanks for the help mate.
I disconnected the USB cable - didn't help...
I even terminated AS process from the Windows Task Manager so it couldn't interfere with the process of flashing...
What about this i quoted above? Can you give me some tips, thanks ?
dolke said:
First, thanks for the help mate.
I disconnected the USB cable - didn't help...
I even terminated AS process from the Windows Task Manager so it couldn't interfere with the process of flashing...
What about this i quoted above? Can you give me some tips, thanks ?
Click to expand...
Click to collapse
dude a good idea is not to use USB cable to charge the phone use a wallplug one.... it works really well.... nvm ill talk to cruzzmz about this matter we will see what he has to say but try flashing with Wallplug charger instead of usb
ashburn said:
dude a good idea is not to use USB cable to charge the phone use a wallplug one....
Click to expand...
Click to collapse
I tried to do it with wall-plug... Same thing again!!!
dolke said:
First, thanks for the help mate.
I disconnected the USB cable - didn't help...
I even terminated AS process from the Windows Task Manager so it couldn't interfere with the process of flashing...
What about this i quoted above? Can you give me some tips, thanks ?
Click to expand...
Click to collapse
A stock rom is a rom that is provided by your carrier/mgf of your phone. It is basically the original rom that came with your device. For the most part, most vendors have them available for download or by request to their customer support centers. Try to look in the O2 page, you might find it there.
Are you taking out the storage card before flashing? I have seen this causing problems in different phones when they are left in.
egzthunder1 said:
A stock rom is a rom that is provided by your carrier/mgf of your phone. It is basically the original rom that came with your device. For the most part, most vendors have them available for download or by request to their customer support centers. Try to look in the O2 page, you might find it there.
Are you taking out the storage card before flashing? I have seen this causing problems in different phones when they are left in.
Click to expand...
Click to collapse
right o2 has it somewhere i remember... choose ur country the actual one not thailand.. hehee there is Windows Mobile 6 WWE something there..
give it a shot
People... I don't know what to say...
I download-ed update ROM for WM6, the one from the O2 support site, and tried to update it... Everything went well, but at same place like earlier, device stacked! It is align app again, and i can't get out from it...
Some more suggestions?
dolke said:
People... I don't know what to say...
I download-ed update ROM for WM6, the one from the O2 support site, and tried to update it... Everything went well, but at same place like earlier, device stacked! It is align app again, and i can't get out from it...
Some more suggestions?
Click to expand...
Click to collapse
The only other thing I can think of is that your digitizer is busted. Do you have a warranty? You may be able to send your phone for repair...
hmmmm u try and sync ur Mobile..... look for a software thats skips the Align menu... i got a blue angel too that happen like urs before i use a certain app to do it and it skips tthe align thingy... well all i know my blue angel was not working well... i accidentally drop it one day and the touch screen works... but im not asking u to drop it lol... do not take the risk like me haha... but try to look for the soft i mention above....
egzthunder1 said:
The only other thing I can think of is that your digitizer is busted. Do you have a warranty? You may be able to send your phone for repair...
Click to expand...
Click to collapse
Device is bought in Thailand and I'm from Serbia, so warranty is off little use. O2 and Telefonica company are not present here not even in surrounding countries so i doubt i could have it serviced...
Ashburn, i'll consider your advice and try to find that app. Can you tell me any tip, maybe the name off the app or part of the name...anything that could help, tnx
UPDATE on my issue
I manage to solve this problem by making an empty file welcome.not [just make notepad text file, but change the extension from .txt to .not] and then upload it to root of the SD card.
I did HR and SF... after that OS booted without welcome screen and alignment setting...
Thank you all for the support!
I suggest mod's to put SOLVED tag in the subject of this thread.
dolke said:
UPDATE on my issue
I manage to solve this problem by making an empty file welcome.not [just make notepad text file, but change the extension from .txt to .not] and then upload it to root of the SD card.
I did HR and SF... after that OS booted without welcome screen and alignment setting...
Thank you all for the support!
I suggest mod's to put SOLVED tag in the subject of this thread.
Click to expand...
Click to collapse
ehehe good job friend i was not sure about the app name used to have it.. i was looking for it until lol u found a solution
Hey Ashburn, i have one q about this cruzzmz ROM's...maybe u are familiar with those...
I see that they are all with WM6.1 version. It is working perfectly on my Zinc, but i was wondering if this is latest V of the OS?
currently cruzzmz is doing something with the latest one.... u got to wait lol cause i did a beta testing half of the file were chinese. and half of it was english cruzzmz is going thru abit of a tight situation right now removing the wip or system file that has chinese so we have to hold on for a moment... hehe and for WM 6.5 we to got to wait... im trying to figure out how to make a rom of my own but i succeded in making WM 6.1 rom of my own with the help of cruzzmz well for now we got to wait for him. Due to respect lol his abit busy
Great... well we have to respect everyone's time and efforts
nice that he already started to work on the newest 6.5 ROM...wish him all luck he need to finish it
Hear ya...
PM me if u'll like to add anything to OP for others to see ur post.
Good news Jelly bean(cm10) on 840S here
Miui also gets to 840s.All by avatartorres!!:highfive:thanks mate.:good:
IM-A830L/S/K
Please any one with root,cwm,recovery, and any more info post here please.This is an awesome phone people dont know of.
update/12\09\2012
NEW
FIXED IO issue here
More roms (Awesome)hereCM10 l/s/k hereIM-a830l 1.38 update and this is how to get it.Best rom for now;Latest software update for the PVR2 a830L here and here for explanation(explanation has a different rom which is my daily driver rom) stock rom for PVR2 A830s here and here for help on a830sCM9 for S here ,k here and for L here(wifi,nfc and other major bugs)
-Installation bare bones simple just put zip on extsd card wipe data,cache and dalvik cache and install zip from sd card.
With thanks for our xda member Borisov we have another rom here.(But be careful as u may run into few bugs like music player,power amp&motion controls are not working).The rom promises u high level of free ram to operate with.So thanks again to Borisov for this contribution.(He found the rom on a chinese thread an decoded the hard language to give us this rom from there)
Root.here
-Plug ur device to ur pc with the micro USB cable.
-Install android sdk.(optional)
-Download this file, unzip and run Root_RC2.bat (if using Windows 7, please right click and select Run as Administrator).
-Press any key then ur device reboots and wait before pressing again.When ur device finishes reboot and u can see the lock screen press any key for step 2.Now ur device should reboot and be really slow but wait until u see the lock screen again and press any key for step 3.
-At boot ur device is rooted and check if super user is installed.
CWM..here
-For cwm connect ur device and run set up(note that this doesnt install a permanent cwm(5.8.4...) but rather triggers it by sending the necessary files over to ur phone which are deleted at reboot.So this is done every time to enter cwm mode)(Cwm needs SD card >3gb to work or else u'll get mount err.)
-The new cwm can be optained in fast boot mode.After triggering the first cwm above download this then put ur device in fast boot mode( by holding volup+down+pwr buttons)and selecting fast boot.Connect to pc and install drivers manually by choosing device sky adb drivers in device manager in the android phone section.Run cwm fast boot bat follow instructions and u get cwm.
-Nandroid backups tend to get stuck at last stage of backing up data.Never tried to restore but if there is a courageous tester u'll be welcome
Google Now: This one works fine without any major issues.Flash it in recovery.Really amazing.here (you may want to read this before installing google now)
credit to cajunflavoredbob
Solve sms sent error when sending 80-160 character range.(A830L)(doesn't work with newer 138 update so beware) here
Vega racer 2hands on and here
CHANGELOG:
-Changed links to my account so more reliable for download.(18/07/2012)
-added sky launcher(31/07/2012)
-{added launchers link(19/08/2012)}.Removed by xda on 23rd.
-added google now.(23/08/2012)
-added new cwm tip and workout.(23/08/2012)
-Vega racer 2 hands on(29/08/2012)
-Software upgrade(31/8/2012)
-added sms fix and changed links to firmwares.(5/9/2012)
-Borisov rom and my root intructions re-written(8/9/2012)
-CM9(9/9/2012)CM9 for K(13/9/2012)
-Added CM9 bug reporter.(12/9/2012)
_added OTA for IM-a830l(14/10/2012)
-Real sms fix for a830l(17/9/2012)
-FIXED IO issue
-CM10 for both 840&830
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-
IM-A800L/S:-S Rom here .It's a cwm backup which can be restored to ur device.Download guide follow pictures below.account name is the phone number in picture 2 and password is:besthackever
more soon....
You will all be notified as soon as great jelly bean news if found.LOL.:good::good: :highfive:Hit thanks below
hackarchive said:
Please any one with root,cwm,recovery, and any more info post here please.This is an awesome phone people dont know of.
update/14\07\2012
Root.here
cwm..here
Plug ur device to ur pc with the micro USB cable.
Download this file, unzip and run Root_RC2.bat (if using Windows 7, please right click and select Run as Administrator). Follow the instructions (Vietnamese.translate with google to ur language) and ur device will be Rooted.
For cwm connect ur device and run set up :highfive:Hit thanks below.
Click to expand...
Click to collapse
Great! I think I'll be getting one of these when I move to Korea in a couple weeks, but only if I can root it.
Would you mind mentioning where you found these?
Aluminous said:
Great! I think I'll be getting one of these when I move to Korea in a couple weeks, but only if I can root it.
Would you mind mentioning where you found these?
Click to expand...
Click to collapse
In China on taobao.com imported from korea I think.:laugh:
Thread moved at OP request.
I have bought my a830l few days ago and made me surprise.The price is hkd$2780(usd$358).It is very cheap!!!
Sent from my IM-A830L using Tapatalk 2
USB Driver for Windows 7. u can root and other without SDK
A830S file.isky.co(dot)kr/upload/software/USB/IMA830S_USBDriver.zip
A830L file.isky.co(dot)kr/upload/software/USB/IMA830L_USBDriver.zip
A830K file.isky.co(dot)kr/upload/software/USB/IMA830K_USBDriver.zip
avatartorres awesome
mortefy sdk part is just to get it crazy
help support development for all pantech device
my device is pantech im-a760s.. running 4.0.4.. officiall..
80-character SMS limit and how to fix it
Hope this helps anyone who is running a stock ROM on this phone and is frustrated with the 80-character SMS limit.
You may have tried an app such as ICS Messaging (available from the Play Store), but found that it won't send any SMS, though it might show received SMS.
This phone's stock SMS app (mms.apk) sends each character in double-byte to accommodate Korean characters, so the 160-character SMS limit is halved.
I found that if you save your own phone number to the "My Number" area on your SIM card (which is not done by default on many newer SIM cards), this somehow allows third-party apps to work, and allows the sending of SMS up to 160 chars - and more, if your operator supports it.
1. First, find an ancient phone, one that can write to the "My Number" area. Get a really old "dumbphone" such as an old Series 40 Nokia. BlackBerries work very well (I used a Curve). Or you could try an iPhone. (I'm sensing a joke here...)
2. Put your SIM card in and power up the phone.
3. Now, you need to write your own number to the SIM card.
On the Curve I went to Options > Advanced Options > SIM Card.
On the iPhone, it should be in Settings > Phone > My Number.
In the My Number area, enter your full phone number, including the country and area codes.
4. Exit and power off the phone. Put your SIM card back into the Vega Racer 2.
5. Go to the stock SMS app and try sending an SMS, preferably to a friend who is on a different network operator.
If it works, proceed to the next step.
6a: If you have root: Use Root Explorer to browse to /system/app and rename Mms.apk to something else, say, Mms.apkOriginalBackup.
Then install ICS Messaging from the Google Play Store.
Check that it works and that you can now send SMS longer than 80 characters. (N.B.: As I mentioned above, make sure your operator hasn't imposed any limits on SMS length.)
6b: If you don't have root (I didn't test this): You can't get rid of the stock messaging app, so just disable its notifications from within the app. Then install ICS Messaging from the Google Play Store. Check that it works.
If this solution helps anyone else please let us all know. (Also if any other messaging apps, such as Go SMS, work for you.)
yodafone said:
Hope this helps anyone who is running a stock ROM on this phone and is frustrated with the 80-character SMS limit.
You may have tried an app such as ICS Messaging (available from the Play Store), but found that it won't send any SMS, though it .....
Click to expand...
Click to collapse
This it to activate sms serveice on the phone.To solve it is here.
I met a problem when i using my A830L......
I cannot use apps2sd,it said that my primary external storage is emulated.And i found that it's ture,/sdcard on my phone has emulated by external storage.Also,my sd card has replaced to /external_sd.So i cannot install too many games to my phone(large datebase),althought my phone has 16gb internal device storage.
Anybody met this question before?And anybody know the solution? Thank you.
Sorry for my very very bad English.
Sent from my IM-A830L using Tapatalk 2
avatartorres said:
I met a problem when i using my A830L......
I cannot use apps2sd,it said that my primary external storage is emulated.And i found that it's ture,/sdcard on my phone has emulated by external storage.Also,my sd card has replaced to /external_sd.So i cannot install too many games to my phone(large datebase),althought my phone has 16gb internal device storage.
Anybody met this question before?And anybody know the solution? Thank you.
Sorry for my very very bad English.
Sent from my IM-A830L using Tapatalk 2
Click to expand...
Click to collapse
did u try removing ur sd card before installing any of ur games?I believe the phone's file system was configured to prefer the sd card instead of ur phone's memory.Try this and then reply.
(update)Found this for u bro here from how to geek
May I know what's the difference between L/S/K models?
Zouk18 said:
May I know what's the difference between L/S/K models?
Click to expand...
Click to collapse
S-SK TELECOM,K-KOREAN TELECOM ,L-LGU+
S:gsm/edge(900/1800/1900),HSDPA(2100),LTE 850
K:gsm/edge(900/1800/1900),HSDPA(2100),LTE 1800
L:CDMA(850/1900), (3G)CDMA(2000),HSDPA(2100),LTE 800
Sent from my IM-A830L using Tapatalk 2
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
hackarchive said:
did u try removing ur sd card before installing any of ur games?I believe the phone's file system was configured to prefer the sd card instead of ur phone's memory.Try this and then reply.
(update)Found this for u bro here from how to geek
Click to expand...
Click to collapse
I've tried this solution before, but it seems that it cannot solve the problem.
By the way, thank you very much.
Sent from my IM-A830L using Tapatalk 2
avatartorres said:
S-SK TELECOM,K-KOREAN TELECOM ,L-LGU+
S:gsm/edge(900/1800/1900),HSDPA(2100),LTE 850
K:gsm/edge(900/1800/1900),HSDPA(2100),LTE 1800
L:CDMA(850/1900), (3G)CDMA(2000),HSDPA(2100),LTE 800
Sent from my IM-A830L using Tapatalk 2
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
I've tried this solution before, but it seems that it cannot solve the problem.
By the way, thank you very much.
Sent from my IM-A830L using Tapatalk 2
Click to expand...
Click to collapse
Planning to get one myself, but couldn't decide on which model to go. But the L model seems to be most popular, it does support GSM right?
Zouk18 said:
Planning to get one myself, but couldn't decide on which model to go. But the L model seems to be most popular, it does support GSM right?
Click to expand...
Click to collapse
I am from Malaysia and our mobile spectrum is GSM. So far there isn't any problems with users using this device here. 3G works flawlessly as well.
I am planning to get this phone after selling off my Dell Streak 5. Is there NFC in this device?
I read one advert claiming that there is NFC in this device, and I asked my local seller and he verified it however I couldn't anything online regarding this device coming equipped with NFC. Would appreciate it if someone would be able to confirm it.
arvin2212 said:
I am from Malaysia and our mobile spectrum is GSM. So far there isn't any problems with users using this device here. 3G works flawlessly as well.
I am planning to get this phone after selling off my Dell Streak 5. Is there NFC in this device?
I read one advert claiming that there is NFC in this device, and I asked my local seller and he verified it however I couldn't anything online regarding this device coming equipped with NFC. Would appreciate it if someone would be able to confirm it.
Click to expand...
Click to collapse
NFC's here but i've never used it yet and i dont know if there will be compatible banking systems for it.
Adding a guide on Thursday to OP post.
hey guys my cwm recovery mod cant mount my sd card or locate it.Anyone with help on this issue.Getting can't mount sd card error.
hackarchive said:
hey guys my cwm recovery mod cant mount my sd card or locate it.Anyone with help on this issue.Getting can't mount sd card error.
Click to expand...
Click to collapse
Go to CWM and try clearing media partition. Be vary that most of your files in your phone will be wiped. Back them up.
I am not responsible for any damages that happen by using this guide to you or your mobile or your pc. this guide is only meant for samsung s dous gt-s7562 which might had been bricked and have no other option to get it back, can try this guide to bring it back to life or return to a factory default state completely, yet there is no guarantee that it will work with every device. don't blame me.
These files here are to be used with care and only on Samsung Galaxy S Dous GT-S7562.
Information about what we are going to do here
basically these files will flash, re-partition and write data to your device the way it was shipped to you. so whatever changes you have made to the device system, boot or recovery will be replaced to default sorting out any bugs within the different partitions.
you may hesitate to flash this firmware rather than your country firmware, but the first thing we should do here is make your phone start working again. after that you can flash to your baseband. the files are all here on xda. and you can always find a way around.
Requirements
1. A bricked gt-s7562 where you can only have access to the download mode by pressing Down+Power button+Home button if its hard brick where you can't even reach download mode and recovery and looks like its dead, check thread post #4
2. Working Data cable
3. PC with windows
4. Make sure your recovery is dead have you been pressing all the up down home and power button and releasing after seeing the samsung screen?
Instructions. (follow it or stay dead)
1. Download the zip file S7562DXBMD1_S7562OLBBMD1_S7562XXBMD2_Android_4.0.4_4 and save it on your pc.
2. Extract the files using any winzip, winrar, 7zip
3. Open odin3 v3.07.exe
4. Browse PIT and navigate to the downloaded folder to find the file "signed_kyle_v2_0604.pit"
5. Browse Bootloader and open file BOOTLOADER_S7562XXBMD2_1216076_REV02_user_low_ship.tar.md5
6. Browse PDA and open file CODE_S7562XXBMD2_1216076_REV02_user_low_ship.tar.md5
7. Browse Phone and open file MODEM_S7562DXBMD1_1216076_REV02_user_low_ship.tar.md5
8. Browse CSC and Open file CSC_OLB_S7562OLBBMD1_1216076_REV02_user_low_ship.tar.md5
9. Check that auto reboot, re-partition and f-reset time are ticked. (see screenshot to cross check.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
10. You sure? then start the process and wait for it to complete.
Thanks for ur post
Have tried ur method 4-5 times still phone stuck at Samsung bootanimation. Only download mode is accessible
Any help would be appreciated
daneal2u said:
Thanks for ur post
Have tried ur method 4-5 times still phone stuck at Samsung bootanimation. Only download mode is accessible
Any help would be appreciated
Click to expand...
Click to collapse
Have you tried removing the battery then switch on again and try to get into recovery mode?
If you can get into recovery mode after flashing pit and pda through odin. wipe cache and factory reset then try again.
also it would be helpful if you can provide a screenshot if there are any errors while flashing in odin
Hard Brick to Unbrick image Recovery Method
Method Not working
Here is another Method that I've found but, still haven't come across a situation like this to try and test out myself, see If anyone whose Samsung S dous s7562 (Only this device) has a Problem where he can't even reach the download mode or the recovery mode Only then you should try this.
if You're able to either get to download mode or recovery, please don't try this at all unless you're a scientist or an engineer.
Requirement
1. An external sd card 4gb(class 10) (1st priority) or 16gb (both untested) (2GB and 8GB won't work, must be class 10)
2. Card reader and
3. PC.
Procedure
1st Connect the external sd card to the card reader move all the files to your pc and format it.
2nd. Download and extract this debrick.img image from debrick.zip
3rd Download and extract this software win iso burner
4th. Open the software win32diskimager.exe and browse the debrick.img
6th. Write the debrick.img onto it.
After it's successfully written, close it and remove battery and put the sdcard in your device and switch it on.
if you can then get into download mode, you should follow the instructions from the 1st post above.
Sometimes getting into recovery could be quite a tricky task with this device, before concluding that you can't reach your recovery.
Please try holding power button + home button + up and down button both at the same time(at the center) and keep holding untill you see the samsung S dous 7562 screen then leave the button.
No result Billysam
Nothing happened
I even made my own jig that woks fine with other Samsung phones
But mine nothing it start the phone though but no download mode
And isn't there any other program that can detect the phone on PC while its off like android commander .. as you suggest resting might be the only solution ... or might be some hardware ic problem !!!!
Adb won't work, unless your device had usb debugging enabled or a matter of fact your device to be readable enough to know it is usb debugable. But I am sorry to say it looks more like the storage is all messed up with bruises so much that even kernel is not readable. Your was not a case of bad flashing rom or kernel, it was a physical damage. And when that happens to any storage device, be it a cd, dvd, hard disks or a mobile emmc. You change it.
I am not really a hardware expert, but dwelling into this matter further, trying to repair it, wouldn't be easy at all, because maybe I am right about the chip, and it solves to some extent but what if you replace it, then come to know that there were more damages suffered?
Hello Billysam,
5 points and 5 points only needed to mention .. May be you are right troubleshooting is over .. But for future consideration .. And small brainstorm ..
Point No. 1 :
Mobile repair store actually did not damage, broke or misplace and thing in my phone because they did not open it at all ... As soon as they saw the phone they its software related problem though I mentioned that the phone has an accident .. One of them actually told that if its hardware related (emmc ic) it will show the samsung logo and then restart .. even that one them told the solution is JTAG ..
Point No. 2 :
I had second S duos which I gifted after I did mix of the parts and reached to conclusion that the problem is the board which has every thing intact
piece by piece cause I separated every little part camera, led, speaker and antenna even the screen with the touch working perfectly fine the accident did not harm the screen in any way not a scratch ... And also I rooted, custom rom, stock rom with odin and custom rom again and phone was working fine with no problems till it hit the wall .. I know pretty much every thing about boot, recovery, recovery mode, fast boot and adb shell and also download mode ..
Point No. 3 :
The phone show the start screen and even download mode but as soon as it shows those it restarts .. I even made my own JIG .. whic works perfectly with other samsung phone goes immediately to download mode .. but my phone starts but nothing on the screen and restart like before ..
Point No. 4 :
Debrick !! what does it do ??? !!!! because it didn't do any thing to my phone ... it need little explaining so may be I did some wrong with the steps .. And I used 2 g.b. external sd card .. Is it compulsory to use more then 2 g.b. sd card ??!! ... ( what it had to do with starting dead phone and how ?? ) ..
Point No. 5 :
Used to and currently also using Nokia phones in their flashing program there was a mode of dead phone flashing which does not require starting phone full dead and flashes fine .. Isn't there a method like that for samsung a program or something ... yeah may its the JTAG ... I mean some thing with usb cable like fastboot or any other android commander or event trough connecting it with another phone ...
Sorry for inconvenience ... thanks alot ....
MaxxiMillian said:
Hello Billysam,
5 points and 5 points only needed to mention .. May be you are right troubleshooting is over .. But for future consideration .. And small brainstorm ..
Point No. 1 :
Mobile repair store actually did not damage, broke or misplace and thing in my phone because they did not open it at all ... As soon as they saw the phone they its software related problem though I mentioned that the phone has an accident .. One of them actually told that if its hardware related (emmc ic) it will show the samsung logo and then restart .. even that one them told the solution is JTAG ..
Point No. 2 :
I had second S duos which I gifted after I did mix of the parts and reached to conclusion that the problem is the board which has every thing intact
piece by piece cause I separated every little part camera, led, speaker and antenna even the screen with the touch working perfectly fine the accident did not harm the screen in any way not a scratch ... And also I rooted, custom rom, stock rom with odin and custom rom again and phone was working fine with no problems till it hit the wall .. I know pretty much every thing about boot, recovery, recovery mode, fast boot and adb shell and also download mode ..
Point No. 3 :
The phone show the start screen and even download mode but as soon as it shows those it restarts .. I even made my own JIG .. whic works perfectly with other samsung phone goes immediately to download mode .. but my phone starts but nothing on the screen and restart like before ..
Point No. 4 :
Debrick !! what does it do ??? !!!! because it didn't do any thing to my phone ... it need little explaining so may be I did some wrong with the steps .. And I used 2 g.b. external sd card .. Is it compulsory to use more then 2 g.b. sd card ??!! ... ( what it had to do with starting dead phone and how ?? ) ..
Point No. 5 :
Used to and currently also using Nokia phones in their flashing program there was a mode of dead phone flashing which does not require starting phone full dead and flashes fine .. Isn't there a method like that for samsung a program or something ... yeah may its the JTAG ... I mean some thing with usb cable like fastboot or any other android commander or event trough connecting it with another phone ...
Sorry for inconvenience ... thanks alot ....
Click to expand...
Click to collapse
You shouldn't have used a 2gb card, thats why I said more than 2GB dear. The reason I am not sure about this is clear, I havent tested this method.
the debrick.img is basically a image that contains boot files, by writing this img on an external sdcard, we are making the device use the external sdcard as an internal to boot, like a live linux cd or a bootable windows cd. our device is 4GB internal if I am not mistaken, my guess would be try with a 4GB sdcard preferably a class10, if that also doesnt work try another card 8 or 16gb.
people have used this method on other devices with success too, but on our devices, if you can make it work, it would be the first, and you my friend will be the first one.
Hard bricked s duos 7562
Phone turn on with little vibration after that the screen remains black screen. Whatever changes that i done with 3 button combination it still remains black screen.
Even i tried the "Debrick" method with 8gb SD card. No use..!!!
And finally done my DIY USB Jig also but still no use..
Think so the phone get hard bricked. So what can i do further??
My phone just stuck in firmware upgrade encountered an issue please select recovery mode in kies and try again after try your method
what should i do?
thanks before
just_saprol said:
My phone just stuck in firmware upgrade encountered an issue please select recovery mode in kies and try again after try your method
what should i do?
thanks before
Click to expand...
Click to collapse
Sorry for the late reply, please quote or mention my username ID with an @ so that I can get notified and reply sooner.
which method did you used exactly? did it get interrupted or lost power in the middle of the process? can you still access download mode?
always take care when flashing that you don't lose power in between the process and don't force close and wait patiently.
gvprasad said:
Phone turn on with little vibration after that the screen remains black screen. Whatever changes that i done with 3 button combination it still remains black screen.
Even i tried the "Debrick" method with 8gb SD card. No use..!!!
And finally done my DIY USB Jig also but still no use..
Think so the phone get hard bricked. So what can i do further??
Click to expand...
Click to collapse
So, 8GB card also didn't worked. I am sorry that it didn't worked out for you. the debrick method it's still not been successfully done for our device. although I have seen other people doing it on their device for some reason, it's not taking on our device. there a 16GB card was used. (the result varied for different users) I don't know what can do further than this to say try with a 16GB card as well or give it to your local shop.
last resort is a JTAG that a professional should try. which I am not and myself had given to the expert local shop when faced a hard brick.
@billysam thank u a zillion for ur guide.
I had this phone lying around for an year or 2 & I just tried this & bam.. it booted up
Cant thank u enough.
ur the best
daneal2u said:
@billysam thank u a zillion for ur guide.
I had this phone lying around for an year or 2 & I just tried this & bam.. it booted up
Cant thank u enough.
ur the best
Click to expand...
Click to collapse
Wow! Congrats buddy and thank you for letting me know that it did some good for you at least. you were the first to try my method from the 1st post which failed the first time. but which one did worked for you exactly? the debrick? can you share what you did?
it will help others as well too.
billysam said:
Wow! Congrats buddy and thank you for letting me know that it did some good for you at least. you were the first to try my method from the 1st post which failed the first time. but which one did worked for you exactly? the debrick? can you share what you did?
it will help others as well too.
Click to expand...
Click to collapse
I did the 1st one
followed each & every step & got my s duos resurrected thanks 2 u @billysam
the 4th post doesn't help me !!!! i used two 8GB sd cards and doesn't work for me!!!! (one with class 10 and the other class 4)
i neeeeeeeeeeeeed another solution please !!!! :crying: :crying: :crying:
sorry for bad english !
billysam said:
Here is another Method that I've found but, still haven't come across a situation like this to try and test out myself, see If anyone whose Samsung S dous s7562 (Only this device) has a Problem where he can't even reach the download mode or the recovery mode Only then you should try this.
if You're able to either get to download mode or recovery, please don't try this at all unless you're a scientist or an engineer.
Requirement
1. An external sd card 4gb(class 10) (1st priority) or 16gb (both untested) (2GB and 8GB won't work, must be class 10)
2. Card reader and
3. PC.
Procedure
1st Connect the external sd card to the card reader move all the files to your pc and format it.
2nd. Download and extract this debrick.img image from debrick.zip
3rd Download and extract this software win iso burner
4th. Open the software win32diskimager.exe and browse the debrick.img
6th. Write the debrick.img onto it.
After it's successfully written, close it and remove battery and put the sdcard in your device and switch it on.
if you can then get into download mode, you should follow the instructions from the 1st post above.
Click to expand...
Click to collapse
Could you explain what that debrick image does and where its from?
Gesendet von meinem GT-S7562
KlinkOnE said:
Could you explain what that debrick image does and where its from?
Gesendet von meinem GT-S7562
Click to expand...
Click to collapse
well the debrick image is from my samsung s duos GT-S7562, the debrick img was taken out from running the dd command
if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=128
where mmcblk0 is the location where all the partition layout information is stored.
it copies the files AMSS.MBN and AMSSHD.MBN and puts them onto the image file which are the files responsible for the fast boot.
so basically its an image of s duos device boot. so we are writing the files on an external card the same way its written on our internal card.
Now, I have read on xda forum itself of other samsung S III users(or you can say mobiles using snapdragon) have this wiring setup where in case internal card is not readable it shifts to the external card.
Hope this answer your Question?
But seriously, It's just a theory in our case. there haven't been any report of anyone from our S Duos users getting this to work.
although I feel it should work, if not, might take some hardware wiring to make this work. that would be practical.
billysam said:
well the debrick image is from my samsung s duos GT-S7562, the debrick img was taken out from running the dd command
if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=128
where mmcblk0 is the location where all the partition layout information is stored.
it copies the files AMSS.MBN and AMSSHD.MBN and puts them onto the image file which are the files responsible for the fast boot.
so basically its an image of s duos device boot. so we are writing the files on an external card the same way its written on our internal card.
Now, I have read on xda forum itself of other samsung S III users(or you can say mobiles using snapdragon) have this wiring setup where in case internal card is not readable it shifts to the external card.
Hope this answer your Question?
But seriously, It's just a theory in our case. there haven't been any report of anyone from our S Duos users getting this to work.
although I feel it should work, if not, might take some hardware wiring to make this work. that would be practical.
Click to expand...
Click to collapse
Yes thanks...
i already tried that without success.
I found the information in that thread http://forum.xda-developers.com/android/apps-games/app-partitions-backup-t3003599
which lead me to the s3 threads too.
Without using dd commands the app does it for you.
That method is propably not supported.
damn i still have a hard bricked s7562 lying around waiting for its time
I was able to gain access to Zebra's firmware (access privileges have been revoked temporarily....I hope) downloads and am here to share it with anyone who needs it. Feel free to share the link or mirror as you see fit. It's my personal dropbox so if too much traffic happens I'll upload elsewhere. Though my upload speeds are crap as I'm stuck with DSL where I'm at, so please be patient as the files take time to get there and at the time of this post the files I already have are still uploading with about 4 hours left. Also, the files aren't organized an any way shape or form, so cross reference the version your device is on with the Zebra website to confirm which file you are supposed to use. The manual is free to download from their website. USE IT!
If Windows OS files are needed or files for the TC75 or any other Zebra firmware/reset files are needed, feel free to PM me with the file name needed and for which device. I've been given access to the entire download section so take advantage of it and turn that paperweight into something useful!!
*DISCLAIMER*
I'm not responsible for anyone who doesn't read the manual as described above and bricks their device due to lack of common sense and basic knowledge of the Windows/Android OS mechanics. I gave you the files but my responsibility ends there.
Link to files
Dropbox
Link to download section on Zebra.com for cross-referencing
Zebra Downloads
*****EDIT*****EDIT*****EDIT*****EDIT*****EDIT*****
I apologize to all the members that have emailed me trying to find out about getting firmware files for their device. I have been out of the country and unable to keep this thread updated due to job restraints. In trying to gain access it appears that Zebra has began limiting access to their firmware files so as of right now I am unable to get access to their file server and retrieve anymore than what is already in my dropbox. I will leave that link up and anyone is free to mirror these files.
I will continue my attempts to gain access to the files everyone wants but I may have to use more unconventional methods to accomplish this and may not be worth it in the end. Sorry. Keep your fingers crossed...
Or better yet shoot an email to Zebra's support department, feed em some b.s. story about you needing to reset and update the firmware on the device you have because you bought it from ebay (*wink,wink*). They may ask for device specifics like serial numbers or something but sometimes if you wait it out, the approval may get pushed through to close the support ticket. Just don't give up on the first attempt. Good luck.:fingers-crossed:
*****EDIT2*****EDIT2*****EDIT2*****EDIT2*****EDIT2*****
CLICK FOR FIRMWARE NEEDS
bobtsunam said:
I was able to gain access to Zebra's firmware downloads and am here to share it with anyone who needs it. Feel free to share the link or mirror as you see fit. It's my personal dropbox so if too much traffic happens I'll upload elsewhere. Though my upload speeds are crap as I'm stuck with DSL where I'm at, so please be patient as the files take time to get there and at the time of this post the files I already have are still uploading with about 4 hours left. Also, the files aren't organized an any way shape or form, so cross reference the version your device is on with the Zebra website to confirm which file you are supposed to use. The manual is free to download from their website. USE IT!
If Windows OS files are needed or files for the TC75 or any other Zebra firmware/reset files are needed, feel free to PM me with the file name needed and for which device. I've been given access to the entire download section so take advantage of it and turn that paperweight into something useful!!
*DISCLAIMER*
I'm not responsible for anyone who doesn't read the manual as described above and bricks their device due to lack of common sense and basic knowledge of the Windows/Android OS mechanics. I gave you the files but my responsibility ends there.
Link to files
Dropbox
Link to download section on Zebra.com for cross-referencing
Zebra Downloads
Click to expand...
Click to collapse
do you have the Factory Reset zip? not just the enterprise wipe?
Has anybody else had any luck with locating these files? There are so many different ones with many different names for many different models. I have the TC700H and I flashed it with one of the ZIP files from the dropbox folder, works fine except wifi will not turn on.
T70N0KXXARUEF01903.zip is the specific file I need
For those unable to download the files trough Dropbox and failing,
I have copied the files to Mega, so if you like, You can also get them from there.
I only need an email to send the link to?
Or if anyone knows how to make an Public folder there, Please let me know.
: can anybody point me in the right direction of the USB charger for the tc70, I saw them on Amazon but they are very expensive and all I need is the cable itself. Or is there a ghetto way of charging it?
Sent from my Moto Z (2) using XDA Labs
Alg0rhyth3m' said:
: can anybody point me in the right direction of the USB charger for the tc70, I saw them on Amazon but they are very expensive and all I need is the cable itself. Or is there a ghetto way of charging it?
Sent from my Moto Z (2) using XDA Labs
Click to expand...
Click to collapse
Looking at the 10 points on the back top left most is negative, two over to the right is positive. These ten points are also perfectly spaced for headers if your handy at soldering. Or can cut the end of a usb cable. Just be careful not to touch other points as bad things can happen.
Not responsible if it smokes, flings poo, or otherwise isn't happy
[-] O [+] O O
O O O O O
Can anyone help me with the reset files for the Marshmellow TC70x?
Can you get the TC56 full flash file for Nougat?
Hi, i have bought zebra tc 56dj but there is an admin settings and I am not able to restore it, also I am not able to download a file from zebra website as the device has been bought by someone else. Any chance that any of you have a software for this model ?? thanks
Hi, i need the T700HKXXXREENxyyzz.zip for an enterprise reset for my tc700h and my email is [email protected] if you could send me the link, that would be awesome
TC75
oI've reset some mc40s, tc70s and 51s without problems by placing said files onto the sd card. I also gained root on them except for tc51, i haven't tried yet.
I have now a tc75 that is unable to mount the external sd card in order to reset. It sees the storage is there in recovery but is not mounted. This is what is says in the manual: : "There is a Mandatory patch (T75NOLxxxxxxxxxxxx.zip) to be applied along with this OS which is required to update any package from an External SD card from MDM
only."
How to get around this? The only way to do this is through usb connection and placing the files onto the internal storage? I dont have a cable or cradle. And for everyone here who is also without this expensive usb cable, I think its plausible to make one since these units have the pinout connections right on the exterior, if anyone wants to figure it out, shouldn't be hard. They are locking down external storage access making it harder if you dont have a cable.
.
OHNONONO said:
oI've reset some mc40s, tc70s and 51s without problems by placing said files onto the sd card. I also gained root on them except for tc51, i haven't tried yet.
I have now a tc75 that is unable to mount the external sd card in order to reset. It sees the storage is there in recovery but is not mounted. This is what is says in the manual: : "There is a Mandatory patch (T75NOLxxxxxxxxxxxx.zip) to be applied along with this OS which is required to update any package from an External SD card from MDM
only."
How to get around this? The only way to do this is through usb connection and placing the files onto the internal storage? I dont have a cable or cradle. And for everyone here who is also without this expensive usb cable, I think its plausible to make one since these units have the pinout connections right on the exterior, if anyone wants to figure it out, shouldn't be hard. They are locking down external storage access making it harder if you dont have a cable.
.
Click to expand...
Click to collapse
Factory cable might be the same as the Motorola factory cable. Without looking it up, I think the the 5v line is split into two going to the original pin and either the green or yellow wire pin with a 1k ohm resistor (don't quote me on that). Again I'm just assuming it would be like Motorola's since i thought they bought out Zebra/Symbol. Hence the restructured firmware support.
EDIT: Like this..
http://www.droidforums.net/threads/how-why-to-make-your-own-motorola-factory-cable.146492/
I also need T700HKXXXREENxyyzz.zip can you please send me a copy! [email protected]
About tc75 gsm version firmware
Hi. Any way to get firmware for tc75 ?
Tc70 clean No Enterprise installed and its rooted Magisk
I have tc70 symbol zebra finally I totally wipe out all enterprise that been installed on my device. If you can root ur tc70 or any model on zebra device root it and download this app parted sdcard, terminal for android, and system app mover. U can uninstall all the enterprise on your device... Now my tc70 more enterprise been installed... What I need now is custom ROM for this device but I don't think there is a custom ROM that fit on zebra device... But I will try to put some custom ROM any custom ROMs I will push it into my device hehehe... All enterprise no longer on my tc70 or tc700h everything works Wi-Fi touch screen volume power button no apps error. And yet my device went fast and smooth to use without enterprise installed and also its rooted by magisk root he he cheers . anyone out there who can provide a custom ROM for my tc70 rooted magisk please help me pm me and I will give the information on my device thank you
Sorry for bad English cheer
I need the files for TC55. Can you pls help me
Thanks
Can any 1 help me fully whip a zebra tc700k
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm getting a page error 404 not found when selecting download on zebra site. Only happens on AOSP builds. I don't get the error for downloading gms builds. Anyone experience this?
---------- Post added at 08:09 PM ---------- Previous post was at 08:05 PM ----------
I'm trying to get around FRP lock tc51 by switching from gms build to aosp since email setup is not required for AOSP builds . Anyone know another way to bypass frp on marshmallow tc51 ?
The 404 page error gets me thinking they are blocking? What tf is going on?!
i've sucesfully upgraded to lollipop but have no wifi. there's nothing in the upgrade manual regarding having to do something extra for wifi!
Hello to the crew at XDA!!!
Thought I'd register and see if I can get a lil help/guidance from anyone.
I have the Oneplus one (recently discovered it is called bacon) , the 64gb model.
My story goes a lil something like this.........
I was playing around with my phone at the weekend and noticed it had TWRP, does this mean my phones been rooted? In my mind, TWRP menu would be bios on a pc.
Anyway, so I was looking around bios and somehow managed to delete everything off my phone, no apps and no contacts and I should of left this WELL alone but it was too late, I'd lost my phone :crying:
I have been trying to learn about flashing/dirty flash, md5's, ROMs, gapps,etc. I managed to get an OS on the phone but no apps. The gapps I tried to flash(install) just froze, thought it'd take time, I gave it time and so no joy. So I am wondering can someone guide me to the version I had on the phone before or tell me a better OS and corresponding gapps that can customize what google apps I can put on without slides,sheets,newsstand,stuff like that please? And I guess all I have has gone but I still have the files on my phone for example, CSR 2, Facebook, etc. Is there anyway of getting the apps I once had, as well as my contacts?
Please go easy on me, I'm totally new to all this and only learning because I had no choice but I am finding it quite interesting. I never knew there's so many OS options. Heard of rooting but the fear of bricking my phone kept me clear but I want my apps n stuff back, if poss.
Sorry for the looooong winded essay! but at least you know what I've done to lose all my stuff.
Your Patience is greatly appreciated!! :good:
G.
ll try to help , but sorry for my bad english btw
1. better OS , i think lineageOS is stable for now , im using that too , no problem so far. download the rom from official website ,and..
a. Link : https://download.lineageos.org/bacon
2. dont forget the gapps (openGapps) and make sure ur rom android version and the gapps are same
a. Link : http://opengapps.org/ , choose ARM -> 7.1 -> and for the variant , im using micro ,but its up to you
3. Procedure is pretty simple ,
a. put the file on ur internal storage
b. go to TWRP by pressing volume down and power at the same time and hold
c. once u booted up to twrp , choose wipe , and check data , cache , dalvik , and system (not internal , not again)
d. after it , go to install , and choose the rom , press add more zip , and choose the gapps , and u r good to go
e. press install and wait till it finished ,
f. Reboot
4. but sorry i cant help u about the apps and the contacts, but i think the contacts will automaticly sync once u sign in ur google account
hope it help thx , sorry for ma bad english once again
Hello Azhar_Farhy,
I do apologise for such a vacant response from me, busy days
Thank you for your reply I must say also.
I had tried as per your instructions and lineage OS did install but came up with flash errors, did write them down as:
Patching system image unconditionally
E: unknown command (log)
E: unknown command (log) in red letters
I also copied the md5sum, wrote it in txt in windows. Copied it into same place as OS flash but didn't find it??
So as for the OS goes, it's been unable to a point. It loads ok, the gestures are mixed up (I noticed 'V' brought up camera and 'O' brought up the torch), not that I use them anyhow. But using the browser, some pages work and alot don't so that's my issue with the OS.
Now with the gapps,
I had issues flashing this altogether. This came up with an error code 70?
Error as follows:
E: Error executing updater binary in zip''/sdcard/Download/open_gapps-arm-7.1-stock-201705010zip
Error flashing zip *followed by the same error path as above??
So as you might of guessed, I'm still without any apps and forced to use a tired s3 atm but may consider changing it up once it got the hang of it on the phone in question.
And in other news......, have a my contacts!!!! So that was a close call!! ??
I'll look forward to anyone's interested in the matter ☺.
G
Hello Azhar_Farhy,
I do apologise for such a vacant response from me, busy days
Thank you for your reply I must say also.
I had tried as per your instructions and lineage OS did install but came up with flash errors, did write them down as:
Patching system image unconditionally
E: unknown command (log)
E: unknown command (log) in red letters
I also copied the md5sum, wrote it in txt in windows. Copied it into same place as OS flash but didn't find it??
So as for the OS goes, it's been unstable to a point. It loads ok, the gestures are mixed up (I noticed 'V' brought up camera and 'O' brought up the torch), not that I use them anyhow. But using the browser, some pages work and alot don't so that's my issue with the OS.
Now with the gapps,
I had issues flashing this altogether. This came up with an error code 70?
Error as follows:
E: Error executing updater binary in zip''/sdcard/Download/open_gapps-arm-7.1-stock-201705010zip
Error flashing zip *followed by the same error path as above??
OPO doesn't have SD slot??
So as you might of guessed, I'm still without any apps and forced to use a tired s3 atm but may consider changing it up once i get used to the hang of flashing & code stuff. But I don't think I'll dig that deep down the rabbit hole
And in other news......, have a my contacts!!!! So that was a close call!!
I'll look forward to anyone's interested in the matter .
G
The two errors because of twrp not at latest version, but isn't a problem the flash isn't compromised. The gapps didn't flash because stock package is too big, use nano instead and download others from PlayStore. So wipe once again dalvik, system, data and cache then install lineageos + gapps and reboot, complete the first startup procedure with your google account and you will have your contacts back.
Gapps error 70 happens because you don't have enough space in root. You are trying to flash gapps-mini or higher. Flash micro and then download the other Google apps you need from the store.
Lisko said:
The two errors because of twrp not at latest version, but isn't a problem the flash isn't compromised. The gapps didn't flash because stock package is too big, use nano instead and download others from PlayStore. So wipe once again dalvik, system, data and cache then install lineageos + gapps and reboot, complete the first startup procedure with your google account and you will have your contacts back.
Click to expand...
Click to collapse
Hi Lisko,
I chose the stock gapps package because I thought it would be the package that was on before I cleaned it off?
And I'm not able to get any apps at all, not even Google play is on the phone I tried to go to browser and download but it says it's already installed so yeah, a bit confused with that one mate lol ?
I'll give nano a try. Will this help the browser issue as well? Most browser windows crash and close???
Thanks for the response ?
seanwlk said:
Gapps error 70 happens because you don't have enough space in root. You are trying to flash gapps-mini or higher. Flash micro and then download the other Google apps you need from the store.
Click to expand...
Click to collapse
His seanwlk,
I'm not sure i follow when you say 'enough space in root'? Could you break it down in layman's terms please ??
I was flashing stock gapps which occurred the error, which I thought stock would of been appropriate for the phone. But I do want to shave some apps off, you say to flash gapps mini. Lisko says nano. Is there alot of difference between the two, other than being lighter on space?
Thank you for your response ??
My-man-G said:
His seanwlk,
I'm not sure i follow when you say 'enough space in root'? Could you break it down in layman's terms please ??
I was flashing stock gapps which occurred the error, which I thought stock would of been appropriate for the phone. But I do want to shave some apps off, you say to flash gapps mini. Lisko says nano. Is there alot of difference between the two, other than being lighter on space?
Thank you for your response ??
Click to expand...
Click to collapse
Mini is still too big, here is the packet comparison https://github.com/opengapps/opengapps/wiki/Package-Comparison
The only difference between these is basically the amount of gapps that it contains.
Flash micro and download the rest you need from play store.
With space in root I mean this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
seanwlk said:
Mini is still too big, here is the packet comparison https://github.com/opengapps/opengapps/wiki/Package-Comparison
The only difference between these is basically the amount of gapps that it contains.
Flash micro and download the rest you need from play store.
With space in root I mean this:
Click to expand...
Click to collapse
I'll give it a try now and I'll get back to you all.
Cheers
Good afternoon all.
Really sorry for being a month later to get back to you all but I've been snowed under the past month with work and just haven't had time to get back to you! Please accept my apologies
In regards to the lineage is and gapps, the OS does work but it's browser crashes on every page which is mostly annoying and so I tethered my phone to my tablet which works but I just discovered that chrome works without issues, so yeah, I got gapps and fully operational ☺. Found all my numbers and apps so happy days!!!!
I will ask though, is there another OS I could use as there's so e things I can't seem to remove like the shortcuts on lock screen? Either I've got torch or camera open when I get it out of my pocket, OS browser crashes. There was something else but I can't remember....
And even though the phone is operational, I had the same errors when flashing both the OS and gapps. Saying errors on both but work okay?
I'm not sure where to find "root storage" to know if it has enough space, if someone could explain that, would be really helpful please.
Is there any other OS platforms that are a bit more functional than lineage please? Or anything cool to stick on and be different from most phones? ??
Just want to thank you to all those that have been really helpful!!! ???
My-man-G said:
Good afternoon all.
Really sorry for being a month later to get back to you all but I've been snowed under the past month with work and just haven't had time to get back to you! Please accept my apologies
In regards to the lineage is and gapps, the OS does work but it's browser crashes on every page which is mostly annoying and so I tethered my phone to my tablet which works but I just discovered that chrome works without issues, so yeah, I got gapps and fully operational ☺. Found all my numbers and apps so happy days!!!!
I will ask though, is there another OS I could use as there's so e things I can't seem to remove like the shortcuts on lock screen? Either I've got torch or camera open when I get it out of my pocket, OS browser crashes. There was something else but I can't remember....
And even though the phone is operational, I had the same errors when flashing both the OS and gapps. Saying errors on both but work okay?
I'm not sure where to find "root storage" to know if it has enough space, if someone could explain that, would be really helpful please.
Is there any other OS platforms that are a bit more functional than lineage please? Or anything cool to stick on and be different from most phones? ??
Just want to thank you to all those that have been really helpful!!! ???
Click to expand...
Click to collapse
If you're looking for customization I recommend Resurrection Remix.
link : https://forum.xda-developers.com/oneplus-one/development/rom-resurrection-remix-t3507102
You had better flash nano gapps because of the size limit of system partition.
You can install other google apps such as chrome from play store.
[qQUOTE=psxda97;72762645]If you're looking for customization I recommend Resurrection Remix.
link : https://forum.xda-developers.com/oneplus-one/development/rom-resurrection-remix-t3507102
You had better flash nano gapps because of the size limit of system partition.
You can install other google apps such as chrome from play store.[/QUOTE]
Thanks for the advice psxda. :victory:
psxda97 said:
If you're looking for customization I recommend Resurrection Remix.
link : https://forum.xda-developers.com/oneplus-one/development/rom-resurrection-remix-t3507102
You had better flash nano gapps because of the size limit of system partition.
You can install other google apps such as chrome from play store.
Click to expand...
Click to collapse
Just checked this out on YouTube and it looks pretty cool so going to try it out!!! Thanks again psxda ?
I think I have nano gapps on but just downloaded remix.will flash later. After I see how to backup before I mess my phone up again ? and I ain't doing that again!!!!
It's good you can have a library of ROMs/gapps once their on the phone to switch n choose.
I'll let you know how I get on.
My-man-G said:
Just checked this out on YouTube and it looks pretty cool so going to try it out!!! Thanks again psxda ?
I think I have nano gapps on but just downloaded remix.will flash later. After I see how to backup before I mess my phone up again ? and I ain't doing that again!!!!
It's good you can have a library of ROMs/gapps once their on the phone to switch n choose.
I'll let you know how I get on.
Click to expand...
Click to collapse
You can backup your device via TWRP
Hello people of XDA!
I'm back ??.
I hope all is well with everyone here?
Might as well cut to the chase.
Can someone guide me to the original Marshmallow os for the opportunity please?
I've had the resurrection remix and I thought it was cool as you can modify absolutely anything, BUT, at the cost of apps crashing, phone not lighting up when someone calls and has been very frustrating to say the least. And I never got round (till now) to mention it.
I think the phone is on its way out as the battery drains like crazy and for some reason, whilst it's not in use, it still remains warm and battery still goes, even whilst at work and is in my coat. So I'm thinking of trying to save the last bit of the phone before it completely goes to data heaven.
Can anyone help? Pretty please? ???*
Thank you guys in advance!!
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
A real amateur....strikes again!
C4SCA said:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Click to expand...
Click to collapse
Many thanks C4SCA for that link but I'm afraid I don't have a pc at hand. All I used was the phone to flash the files but with that link, flashing is not possible.
Is there another way to sort this dilemma....pretty please?
Thanks again.
A real amateur....strikes again! Technology isn't my friend...
Hi guys,
This just proves how much of an amateur i am. Spent the best part of about 35 mins writing my essay in 'quick reply', only for it to expire....and i was typing on my little Hudl2 keyboard....
So now i'm starting ALL over again, this time with otg cable and wireless keyboard. Let's see if i remember it all...... eh?
So in conclusion to your reply
C4SCA
Click to expand...
Click to collapse
, i have only just found out how to tether my phone to pc for internet. 21 days later to your reply but i whole heartedly appreciate your help.
With the reply last night, not having a pc at hand, i wasn't at home but i had done some looking around online and found that the marshmallow os is no longer to be updated, so, therefore, i looked around for a new & stable os for the oneplus 'bacon' & came across the pie os from watching Max Lee's (high on android channel) on Youtube. Claiming it's stable and battery life is good (that was my attraction to this).
So.....first things first (and this was all done without a pc, last night).
I backed up my phone to my hdd using the otg cable and backed up via twrp recovery as advised before by
psxda97
Click to expand...
Click to collapse
I then searched for the pie os and found it on XDA site. But as i watched further on Max Lee's channel, i needed to update the twrp recovery ( mine was v2.8.0? i think?). Found twrp version 3.2.3 img file. downloaded it via phone, swtiched to recovery and wiped phone but reinstalled Ressurection Remix (as i backed up to hdd but needed an os to operate) then flashed latest twrp.
Instead of rebooting phone from recovery (don't know why i did this??) but i switched off the phone and back on. Knowing all apps and contacts were gone, i wanted to see if twrp had updated it'self. So i switched off the phone again and back to recovery, only to see that it would not load recovery at all......? It just froze with the oneplus logo (not even with 'powered by Android' at the bottom).
It would switch off by holding down the power button, would go to fastboot, would power back up but never into recovery.
So then today get's better...........!!!!!
I watched more about adb & fastboot on various channels on youtube, online and guides via xda and thought this is my only option to get it back open. So i went home and tried to sort this mess out by:
1, opening development options on phone & enable debuggin
2,download adb driver & fastboot from Max Lee's site
3,unzipped and loaded them into my pc
4,reconnected phone to pc to activate the debuggin message on phone screen( was none?)
This didn't work as my pc said there wasn't a driver for the adb (error code 28).
I updated my pc, even via windows update to restart updates, as some had failed. Pc all up to date.
In device manager, tried manual search for driver path (to universal adb file), no luck. Then tried to find online, still, no luck as pc said to find vendor/website host? Most search for driver came up with the same Universal adb download.
Tried to then fix the code 28 by installing intels adb driver and other adb driver's and still no joy.
But the thing i found strange was in Programs (uninstall), both Universal adb & fastboot were there. just can't find the link between them to the phone?
So i'm very frustrated by technology so no need to shout at me for doing silly things.....But i guess that's how we learn to fix things i guess?
If anyone who has read this and willing to help a fool out, i sincerely appreciate this! :victory: PLEASE?
Without fastboot (code 28)
without twrp recovery
Basic Ressurection os
Without my contacts & apps & life stuff.
Not able to backup from hdd
Stuck............
FYI.
PC is Intel i3, running windows 7 32 bit. Should that help anyone with my issue.
Yours sincerely,
My-man-G
Have you go into fastboot mode? Turn off your phone, then boot using power+vol up.