Database Info

Galaxy Tab 7.0 Plus GT-P6200 hang logo.

i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks

jimmymobile said:
i have one Samsung Galaxy Tap GT-P6200 hang in logo.Please tell me how to flash this phone with Odin or show me the produce.thanks
Click to expand...
Click to collapse
Wrong section.
Please re-explain what you mean. Are you bricked? Use better English please.

Thread moved to General.

I also have this problem. My tab got drained so when I got home, I plugged in the charger to the tab. Then I pressed the power button. So the tab opened but it hangs when the SAMSUNG logo is on the screen. I tried to wait it out for around 10mins but nothing happened, it remained in the SAMSUNG logo. So I tried holding the power button for 15secs to reboot but when it rebooted, the tab still hangs in the SAMSUNG logo.
Please help. I just bought this tab 3days ago. It is not rooted and so far I have installed only around 10 apps and games all from the market. Im not sure what caused this problem.

check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.

chrisrotolo said:
check in the development section under official firmwares post. there are official firmwares and instructions for odin. try to charge up battery as much as possible. a failed Odin flash could be a perma-brick. If you have Kies , I think there is an emergency software recovery option as well.
Click to expand...
Click to collapse
thanks for the reply dude. so im gonna have to flash this tab. i checked the instructions and all is good except for the ROM to use. there are 2 ROMs posted for the P6200. Im not sure which one i should use. I bought my tab here in Manila. All i know is that its a P6200 3g tab. Could i just pick anyone from the two?

The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_

pakalrtb said:
The KK5 is the original firmware that the p-6200 came with . If you install that, as soon as you run it, it should be giving you the notification that an update is available . There will be 2 incremental upgrades and you will end up with KL1.
Or you can directly download the KL1 .
P_
Click to expand...
Click to collapse
thanks dude! anyway im still thinking if i should flash this now or just bring it to Samsung for service. im afraid that if i flashed this, Samsung might say that ive been tinkering with it.

Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_

pakalrtb said:
Before venturing yourself into flashing the stock rom why don't you try a factory reset from the recovery menu :
Turn off the tablet
Press at the same time the power button and the volume up button
As soon as you see the galaxy logo release the power button but keep the volume up pressed until the recovery menu pop up
Select the factory reset option using the volume button and confirm with the power button
I am pretty sure that it will fix your problem
Let me know how it goes
P_
Click to expand...
Click to collapse
thanks dude!! the problem was fixed after the factory reset.
im still wondering though what caused the problem. ill probably try draining the battery again to see if this problem reoccurs.
thanks again!!!

successfully done p 6200

Hi all. I've had the same problem last month. My P6200's battery got drained and was kind of in a boot loop. I didn't know how to do a factory reset then so I looked online for a Samsung Service Center here in the Philippines. I was advised that my device was not covered by International Warranty as I bought it outside of the Philippines (I got mine in India) as only Samsung cameras have have international coverage. The guy still tried to flash it, however, it did not fix the problem. Now it just boot loops to the Samsung Galaxy Tab 7.0 Plus and does not reach the Samsung logo that it used to go to after that.
I'm trying to reset my tab but pressing and holding the power and volume up buttons don't work. Please advise what I can do. I don't want this device to go to waste.
Many Thanks!

ive also had the same problem duno wut to do anymore

Had bootloop problem too
Download Odin and the appropriate firmware for your region then flash it via Odin(turn off tab,press volum down and power until you go in download mode then connect the tab to pc,click pda on Odin,click start,wait to flash)
Good luck

i had the same problem before, when i restart my tab, it was stuck at samsung logo, i wait for 15m but still the same and then i connect to my laptop.
amazingly, kies can detect my tab, so i did backup, suddenly samsung logo disappeared and enter homescreen. maybe around 15m more after i connect to my laptop.
my suspect was the ADW laucher because there's no problem before i installed adw launcher and set it as default launcher.

Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2

gudbud said:
Try clearing dalvik cache from recovery ....worked for me....please keep it as a personal opinion....search threads for better solutions....try this if nothing works...
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Not sure if trolling or not reading dates... The last post in this thread is from May...
Sent from my myTouch 4g via Tapatalk

i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please

Same
jerung16 said:
i tried factory reset so many time but still stuck..my problem now is it keep rebooting after flashing 3.2 HC..anybody please
Click to expand...
Click to collapse
SAME!!!

CLink08 said:
SAME!!!
Click to expand...
Click to collapse
New here? If you are on HC.. enter recovery then wipe cache and partition.. you're welcome
Sent from my GT-P6200 using XDA Premium HD app

Galaxy S2 not booting to recovery or download mode

I am a novice. Please excuse if my forum etiquette is not upto the mark
Issues:
1. Phone not booting into recovery or download mode
2. USB Jig not working as well.
3. When turning on from power off, skips Samsung boot screen as well as ROM boot animation and directly opens home screen.
Background:
Followed instructions on this thread to get rid of yellow triangle (As far as I know, followed instructions to the dot) :
http://forum.xda-developers.com/showthread.php?t=1354888
Ever since, I face the three issues listed above.
Sent from my GT-I9100 using XDA App

Have you tried?
if normal boot process is not working then
remove battery
press volume download+middle key+power on
while holding these keys insert battery , it will (should) work

aramil said:
Have you tried?
if normal boot process is not working then
remove battery
press volume download+middle key+power on
while holding these keys insert battery , it will (should) work
Click to expand...
Click to collapse
Thanks for your response, Aramil:
I've tried multiple times to:
1. Boot to recovery mode - Black screen, only the two soft buttons light up.
2. Boot to download mode - Black screen, only the two soft buttons light up.
3. Turn off phone and connect USB Jig - No response.
4. Removed battery and then replaced it while simultaneously pressing volume down+middle key+power on - No Response.

SOLVED!!
Alrighty. I solved it myself!!
After more than a week of very limited help from members, I stumbled upon the solution to this issue.
The problem was with the bootloader. I flashed a stock bootloader, and all my issues were fixed!!
Thanks to those who attempted to help!!
Any suggestions on how I can get more people to post replies? Almost 200 people saw my post, but just Aramil replied! I must say I felt a bit letdown by the community. Anyways, Thanks Aramil!
rvk

190 of those people just didn't know an answer
9 person were not interested and 1 person was just lazy .
Depending on the question posted and the people who view it, you could have 1 million views with no one knowing an answer.
You could also have tried galaxy s2 Q&A forums.

no recovery or download modes and irregular bootup
I have this trouble also and think it is a bootloader problem. Rinuvimal says problem solved by flashing a stock bootloader. How is that done please?
My problem is:
1. I think it started when I bought a USB jig. To use this I needed to flash an old bootloader which I did through Odin.
2. Now I cannot access CWM by using up volume, home and power buttons. Nor can I access download mode using down volume, home and power.
3. Inserting the usb jig does not now load the download mode screen.
4.From off, when I press power, it does not go through usual boot process (nothing showing on screen) but after the soft key lights come on I seem to have booted up and can then use phone as normal.
My settings show Android 4.0.3, Baseband Version i9100BVKJ4, Kernel version i9100XXLP6-CL72050 and Build number lidroid-resurrection remix ics 9.4 black edition by westcrip XXLPH.
Can anyone help me to solve this problem please?

rinuvimal said:
Alrighty. I solved it myself!!
After more than a week of very limited help from members, I stumbled upon the solution to this issue.
The problem was with the bootloader. I flashed a stock bootloader, and all my issues were fixed!!
Thanks to those who attempted to help!!
Any suggestions on how I can get more people to post replies? Almost 200 people saw my post, but just Aramil replied! I must say I felt a bit letdown by the community. Anyways, Thanks Aramil!
rvk
Click to expand...
Click to collapse
I too face the same problem. Can u just tel me what to do and what not to. Thanks in advance.

Not booting , no download & recovery mode, jig failed
Hello dear,
I have a samsung s duos(7562) rooted phone. I flashed the cosmic rom v1.0 with cwm 5.5 . Now the phone does't booting. When i press the power button the logo of samsung is coming and then power off. When i plug in to charge it then rebooting automatically and not show charging logo. I already used keys and usb home made jig(300k) to go download & recovery mode but failed. When i connect it with my computer then showing connecting and disconnecting on computer. Also adb command not working. Please help me to save my galaxy.

Flash stock rom from odin..if this not work then go to service center then they will flash your device from dongle ...and then your problem is solved
Sent from my GT-S5830i using Tapatalk 2

SGS2 G - flashing problem
Edit: sorry, deleted.

rinuvimal said:
Alrighty. I solved it myself!!
After more than a week of very limited help from members, I stumbled upon the solution to this issue.
The problem was with the bootloader. I flashed a stock bootloader, and all my issues were fixed!!
Thanks to those who attempted to help!!
Any suggestions on how I can get more people to post replies? Almost 200 people saw my post, but just Aramil replied! I must say I felt a bit letdown by the community. Anyways, Thanks Aramil!
rvk
Click to expand...
Click to collapse
How did u flash it? I mean without going into the download mode.

Hi guys i have s2 shv e110s now it looks like dead because its not powerin on no display not going to recovery nor to download mode how to fix last time i flass cwm zip through twrp recovery and wipe data , system,and fectory reset n last i select (boot to system) but my phone not goes on
Plz help

rinuvimal said:
SOLVED!!
Alrighty. I solved it myself!!
After more than a week of very limited help from members, I stumbled upon the solution to this issue.
The problem was with the bootloader. I flashed a stock bootloader, and all my issues were fixed!!
Thanks to those who attempted to help!!
Any suggestions on how I can get more people to post replies? Almost 200 people saw my post, but just Aramil replied! I must say I felt a bit letdown by the community. Anyways, Thanks Aramil!
rvk
Click to expand...
Click to collapse
how did you solve the prblm

[Q] Brick forever or possibility to restore?

Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.

Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635

cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".

Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.

I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app

you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...

edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!

how did you try to enter the recovery mode? what key combination that you press...

Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck

edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.

jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.

I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886

ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.

Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.

ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.

Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.

Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..

Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!

1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....

Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:

Samsung Galaxy Tab 2 (10.1) won't shut down after the latest firmware update

Hi. I hope this is the correct forum. My Samsung Galaxy Tab 2 (10.1) won't shut down after the latest firmware update. I believe I had 4.2.1 and now I have 4.2.2. My device name is is GT-P5113. I plugged the Tab into my computer and Kies opened automatically. It said there was an update for my device so I updated.
All seems to be ok, but now when I choose to "shut down" the tablet shuts down and then cycles back on as if I had just pressed the power button to turn it back on.
I guess it could be worse - it could be refusing to turn on.
Is there a fix for this? Anybody else had this problem?
It is not rooted and I don't really want to do so.
Thanks in advance for any help!

I think u could wipe cache in stock recovery I would do that and see if that fixes it. Hold down vol up and power at the same time till the device reboots into recovery. Dunno how it is on the bigger ones but on the 7" I have to keeo holding the buttons for a second longer after the samsung gtab2 logo comes on to boot in to recovery.
Remember u dont want to factory reset just wipe cache
Sent from my GT-P3113 using xda app-developers app

wipe cache
Thank you for the reply. I tried that and got an "error". I was able to get to recovery mode and choose "wipe cache". It begins and I get an error message.
mymeatb18 said:
I think u could wipe cache in stock recovery I would do that and see if that fixes it. Hold down vol up and power at the same time till the device reboots into recovery. Dunno how it is on the bigger ones but on the 7" I have to keeo holding the buttons for a second longer after the samsung gtab2 logo comes on to boot in to recovery.
Remember u dont want to factory reset just wipe cache
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse

beezerhale said:
Thank you for the reply. I tried that and got an "error". I was able to get to recovery mode and choose "wipe cache". It begins and I get an error message.
Click to expand...
Click to collapse
What type of error?? :cyclops:

error
It just read "error" and a image of the little android on it's back.
mythi said:
What type of error?? :cyclops:
Click to expand...
Click to collapse

beezerhale said:
It just read "error" and a image of the little android on it's back.
Click to expand...
Click to collapse
can you take a picture of it ??

mythi said:
What type of error?? :cyclops:
Click to expand...
Click to collapse
mythi said:
can you take a picture of it ??
Click to expand...
Click to collapse
I just uploaded 4 pics to a section of a website that I already have running.
Here is the link:
http://6thgraderocks.wix.com/galazyerror
The images show the end process of updating through Kies (I screen captured), the current tab info, the recovery screen and the error I get when I try to erase cache. Keep in mind, I am able to reboot and my tablet comes on like normal - no issues except when I try to turn it off - it comes right back on.

beezerhale said:
I just uploaded 4 pics to a section of a website that I already have running.
Here is the link:
http://6thgraderocks.wix.com/galazyerror
The images show the end process of updating through Kies (I screen captured), the current tab info, the recovery screen and the error I get when I try to erase cache. Keep in mind, I am able to reboot and my tablet comes on like normal - no issues except when I try to turn it off - it comes right back on.
Click to expand...
Click to collapse
Did you try flashing pit?? did you flash jb bootloader ?? did your device be rooted before flash ?? were you on cm/aokp/pac/slim/etc ??? if yes whic h build did you flash black hawk next kernel ?? <--- may be it what caused it ---> did you try to downgrade to 4.0.3/4.0.4/4.1.2 if yes what happened what did you flash before going to stock rom like mod and etc ???? hope you answer these questions !!
also try this
enable usb debugging
turn off your tab fully
connect tab to pc pull a logcat dsmg ksmg and post them as txt or pastbin
does your tab stuck in recovery loop like rebooting always to recovery sometimes until you compeletly shut down the tab?
if it is under warranty return it to SAMMY TO FIX IT IT IS THEIR FAULT !!
i think it is not hard ware related don't worry !!

This tab is not rooted or tampered with at all. I have no desire to do so.
mythi said:
Did you try flashing pit?? did you flash jb bootloader ?? did your device be rooted before flash ?? were you on cm/aokp/pac/slim/etc ??? if yes whic h build did you flash black hawk next kernel ?? <--- may be it what caused it ---> did you try to downgrade to 4.0.3/4.0.4/4.1.2 if yes what happened what did you flash before going to stock rom like mod and etc ???? hope you answer these questions !!
also try this
enable usb debugging
turn off your tab fully
connect tab to pc pull a logcat dsmg ksmg and post them as txt or pastbin
does your tab stuck in recovery loop like rebooting always to recovery sometimes until you compeletly shut down the tab?
if it is under warranty return it to SAMMY TO FIX IT IT IS THEIR FAULT !!
i think it is not hard ware related don't worry !!
Click to expand...
Click to collapse

I have the exact same problem with BOTH my Galaxy Tab 2 10.1 (Wi-Fi only) It's a software problem for sure...

Also flashing back to 4.1.1 or lower will eliminate the problem
Sent from my GT-P5113 using xda app-developers app

I know I could probably do that (flash back) myself, but I just don't want to. I have bricked a Kindle Fire before while trying to make it do what I wanted it to. I don't want to mess with this Galaxy - it does exactly what I want it to --- surf the web, Netflix/Hulu, and comic books - I'm not too complicated!
I spoke with Samsung yesterday and they said to try a hard reset. That did not work. I spoke with another rep this morning and they are going to repair or replace it for me. He sent a shipping label to my email. This was a gift and I have no receipt. I am VERY pleased with the service from Samsung.
SebasC said:
Also flashing back to 4.1.1 or lower will eliminate the problem
Sent from my GT-P5113 using xda app-developers app
Click to expand...
Click to collapse

So you're going to replace a perfectly good product with a software mistake? I've two tablets, unrooted, 4.2.2 with the same problem... Your better off waiting for a fix..

Why shoukd he feel burdened for something he had no control over. Samsung sent the update, iys not his fault its not doing what it should. If he wants to return it cuz it doesnt turn off as it should he has every right to do so. At least he didnt brick it and is expecting samsung to pay for it.
Sent from my GT-P3113 using xda app-developers app

I had the same problem
Hello,
I registered here to just answer your question since I've been searching around on the internet as well for this problem. I have a Samsung Galaxy Tab 2 10.1 with version 4.2.1. I updated to version 4.2.2 and all hell broke loose. Before I get into it, I had a perfectly working tablet that never had any problems. I installed all updates through OTA or Samsung Kies. It's not rooted.
Anyway, after the update to 4.2.2 my tablet wouldn't turn on. I had to plug it into the wall outlet and then it finally turned on. After playing around with it, some of the widgets didn't work so I thought maybe I should turn it off and reboot it. When I chose "power off" it wouldn't turn off. Instead it would automatically restart. After trying several attempts it still wouldn't turn off so I contacted Samsung. They made me clear the cache and then wipe out the whole system and install a fresh copy of the software. The tablet then went black and now all that was shown on the screen was the little android bot with the error message like how yours is now. It wouldn't boot up to the main screen anymore.
So I had to return the tablet back to Samsung yesterday and they are going to attempt to fix it. It's still under warranty but I'll be pissed if I won't be able to install the new software on my tablet since I like the new updates they did for it.
Anyway, sorry for my long response but I hope this helps you out even though nothing was resolved. I'll post what happens once I get back my tablet.

Similar "Reboot after turn off" issue
I have the same "can't turn off" issue on my stock Tab 2 10.1 updated to 4.2.2 via Kies. After turning off and confirming on the screen, the tablet simply turns back on. This typically happens several times in a row before something happens and it stays off. I emailed Samsung to request support.
d86 said:
Hello,
I registered here to just answer your question since I've been searching around on the internet as well for this problem. I have a Samsung Galaxy Tab 2 10.1 with version 4.2.1. I updated to version 4.2.2 and all hell broke loose. Before I get into it, I had a perfectly working tablet that never had any problems. I installed all updates through OTA or Samsung Kies. It's not rooted.
Anyway, after the update to 4.2.2 my tablet wouldn't turn on. I had to plug it into the wall outlet and then it finally turned on. After playing around with it, some of the widgets didn't work so I thought maybe I should turn it off and reboot it. When I chose "power off" it wouldn't turn off. Instead it would automatically restart. After trying several attempts it still wouldn't turn off so I contacted Samsung. They made me clear the cache and then wipe out the whole system and install a fresh copy of the software. The tablet then went black and now all that was shown on the screen was the little android bot with the error message like how yours is now. It wouldn't boot up to the main screen anymore.
So I had to return the tablet back to Samsung yesterday and they are going to attempt to fix it. It's still under warranty but I'll be pissed if I won't be able to install the new software on my tablet since I like the new updates they did for it.
Anyway, sorry for my long response but I hope this helps you out even though nothing was resolved. I'll post what happens once I get back my tablet.
Click to expand...
Click to collapse

Reboot issues
avm1 said:
I have the same "can't turn off" issue on my stock Tab 2 10.1 updated to 4.2.2 via Kies. After turning off and confirming on the screen, the tablet simply turns back on. This typically happens several times in a row before something happens and it stays off. I emailed Samsung to request support.
Click to expand...
Click to collapse
I had a live chat with Samsung just now. It is interesting that the tech I communicated with did not know of any issue with the rebooting and there was no mention in their system that a problem even existed (so I sent a link to this page to him).
Anyway, the end result was that it I wanted to fix the problem, I would have to restore Android through KIES:
samsung.com/us/support/faq/FAQ00052690/61266/GT-P3113GRSXAR
This will delete all data and get back to Android 4.2.1
Since I have already have seen issues with KIES, I wonder if it wouldn't be easier to just use ODIN? Any suggestions from those who might have tried both?

update #1
Just wanted to give an update. Samsung sent me an email yesterday stating they "fixed" my tablet. I should be getting back my tablet by the end of this week or early next week. The receipt said that it was a "software problem" and they reinstalled new software with the latest update. I'm just wondering if it's 4.1.2(that worked fine with my tablet) or 4.2.2(which messed up my tablet)
I'll give another update once I get it in my possession.
---------- Post added at 05:33 PM ---------- Previous post was at 05:28 PM ----------
SamsungTab2User said:
I had a live chat with Samsung just now. It is interesting that the tech I communicated with did not know of any issue with the rebooting and there was no mention in their system that a problem even existed (so I sent a link to this page to him).
Anyway, the end result was that it I wanted to fix the problem, I would have to restore Android through KIES:
samsung.com/us/support/faq/FAQ00052690/61266/GT-P3113GRSXAR
This will delete all data and get back to Android 4.2.1
Since I have already have seen issues with KIES, I wonder if it wouldn't be easier to just use ODIN? Any suggestions from those who might have tried both?
Click to expand...
Click to collapse
I tried this when I chatted with Samsung and it messed up my tablet completely where as when I rebooted my tablet it would show an android robot with "error"
Plus, I don't know about you but I don't want to have 4.2.1. I want to have the 4.2.2 update on my tablet. It's a much more sleeker interface. Just the only problem is that it wouldn't shut off. I will see what happens once I have it. If 4.2.1 is on my tablet I will try again updating the software to 4.2.2.

There are some problems like boot fail or can't poweroff I've seen at some posts, they do the same things:
1.flash a 4.2.2 stock rom
2.have some problems: boot fail or can't poweroff eg..
3.boot to recovery and want to wipe the cache
4.get a error with the robot logo lie down
I found a post mentions that he've fixed this problem by using odin 3.07 flash the 4.2.2 stock rom with a matched kernel boot file.
The post is here, it's in chinese:
http://b.it168.com/thread-4690107-1-1.html
His solution is get to this site to find the 4.2.2 stock rom and matched kernel file of your device and use odin 3.07 flash them:
http://samsung-updates.com/
do it at your own risk maybe solve your problem.

Update #2
So I got my tablet today and I turned it on to see that it had android software 4.1.1. Then the software update icon popped up and I updated to 4.2.2. Then the same problem happened again like the last time. The tablet wouldn't turn off and it would automatically restart. I contacted Samsung Support again and they had me do a factory reset which then fried my tablet again. It doesn't turn on. So now I have to send it back again for a 2nd time. This time they said they may have to replace the tablet either with the same tablet or a different model tablet. But I stressed to them to make sure to update the tablet this time to 4.2.2 so they can see the problem I'm facing. We shall see next week I guess what happens.

Galaxy S6 G920F "Recovery Is Not Seandroid Enforcing" Help!

Hi guys this is my first post on here but i have gotten help from this site for years,
Basically i got my Galaxy s6 the other week and was going about rooting it, Ive done this with my previous 3 Phones (S4 mini, S2, Xperia Play)
All using the same method
My S6 is the model number SM-G920F
I used Odin3 V3.10 and C F Auto Root........tar.md5
Everything Passed all green and everything
Im on Android Version Lollypop 5.1.1 Followed instructions from a website called ibtimes.
And like i said it passed, But the phone is stuck on the Samsung screen with the words "Recovery is not seandriod enforcing" in red at the top.
And when i turn the phone off, it just boots back to that screen, I think i need some help!
If you need any more information then ask i will provide any info needed.
Thank you in advance and im sorry for maybe ****ing up a good phone

Emm sorry but cfautoroot doesnt work on 5.1.1 the last time I checked, get in to download mod and flash stock again. 5.1.1 stock.

JusTeN_ said:
Emm sorry but cfautoroot doesnt work on 5.1.1 the last time I checked, get in to download mod and flash stock again. 5.1.1 stock.
Click to expand...
Click to collapse
Is there a link or download you can provide for stick 5.1.1 ? i dont want to **** up again

bretlei said:
Is there a link or download you can provide for stick 5.1.1 ? i dont want to **** up again
Click to expand...
Click to collapse
Sure but do you mind which country?

JusTeN_ said:
Sure but do you mind which country?
Click to expand...
Click to collapse
preferably the UK English one? thankyou

http://www.galaxys6manuals.net/samsung-galaxy-s6-android-5-1-1-firmware/united-kingdom/
Found this one but I think the download will be kinda slow.. I will try to search for a faster one.

Thanks mate, ill have it download through the night and ill try and fix my phone after work tommorow,. will putting this on the phone delete everything on it? or will my files like photos ect be saved? everything else i can get back, but my photos and stuff i cant

Here you go UK 5.1.1 BTU ROM for your use:
http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/

This might help. I had a similar issue and it fixed it. It's just stock ROM. Flash it through Odin and then your custom ROM:
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522

darklime said:
This might help. I had a similar issue and it fixed it. It's just stock ROM. Flash it through Odin and then your custom ROM:
http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
Click to expand...
Click to collapse
Thanks so much guys this worked! Saved me a heart attack !!

roydok said:
Here you go UK 5.1.1 BTU ROM for your use:
http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/
Click to expand...
Click to collapse
Better to use SamFirm to download it as you get full speed downloads from Samsung rather than the rubbish speeds of Sammobile

bretlei said:
Thanks so much guys this worked! Saved me a heart attack !!
Click to expand...
Click to collapse
I have the same problem.
How did you get into the download mode, in order to flash the stock rom .
Everytime I reset, I get into the "Recovery Is Not Seandroid Enforcing" screen.
Help please!!!

echarras said:
I have the same problem.
How did you get into the download mode, in order to flash the stock rom .
Everytime I reset, I get into the "Recovery Is Not Seandroid Enforcing" screen.
Help please!!!
Click to expand...
Click to collapse
When you turn the phone off, Hold The Vol down power and lock buttons as soon as the phone turns off, (Also i could only turn it off doing these three buttons stuck on the samasung screen too) then once you done that it will bring up download mode.

bretlei said:
When you turn the phone off, Hold The Vol down power and lock buttons as soon as the phone turns off, (Also i could only turn it off doing these three buttons stuck on the samasung screen too) then once you done that it will bring up download mode.
Click to expand...
Click to collapse
Thaks Bretlei, that made it possible. I followed the instructions and managed to fix my phone.