[Guide][How To][Tutorial]Run Two Roms On The Same Android Device - General Topics

Here Is How To Run Two Roms On The Same Device
Step One : Flash a Second ROM
You don't anything, make a nandroid backup of your current ROM with ROM Manager or through your recovery module. If anything goes wrong, you can always restore from this backup to get things back to the way they were.To set up BootManager, just download and install it from the Market, and start it up. You'll also want to grab a ROM of your choice and save the zip file on your SD card.When you first start up BootManager, it'll prompt you to back up your boot.img, which you should do before installing any ROMs. Once you've done that, head to "Install ROMs". Pick the zip file from your SD card containing the ROM you want to flash, and check all three boxes: Wipe System, Wipe Data, and Wipe Cache. Let it do its thing (which will take a while). When you're done, it will give you the option of booting into your new ROM. Hit Done; we aren't ready to boot into it just yet.
Step Two: Install Google Apps and Other ROM Add-Ons
Most ROMs don't come with Google's copyrighted apps, like Gmail, the Market, and others. This is a problem, since when you boot into your new ROM you need BootManager to function if you ever want to boot out of it, and it won't work unless you're signed into the Android Market. Luckily, there's an easy fix (note: if you know your ROM comes with Google Apps installed, you can skip this step).Download the Google Apps zip file for the ROM you just installed and go back to BootManager. Hit Install ROMs. This time, pick Google Apps' zip file, and use the same slot that you used in step one. Leave all three "wipe" boxes unchecked this time. When it's done, booting into that slot will take you to the original ROM, but with the Google apps installed.If you want to install a theme or other zip-based mod in the future, you can do that using this method too. Just remember: if you're flashing a new ROM, check all three "wipe" boxes, but if you're just installing an add-on to a ROM, don't check any of them.
Step Three: Switch Between ROMs
To boot into one of your other ROMs, just head into BootManager and choose "Boot Installed ROM". It'll show you a list of ROMs you have installed on your device, and after choosing one of them it will reboot into that ROM. BootManager will come installed on each of your other ROMs as well, and as long as you're signed into the Android Market on that ROM, you can boot into it from there as well and switch back to your main ROM.That's it! You can flash up to five ROMs at a time, so you'll never be bored by one measly operating system. Hit the link to download BootManager.BootManager is a $2.99 download for Android 2.1 and up. See the Market page below for officially supported devices.
BootManager Lite : https://play.google.com/store/apps/...utm_medium=organic&utm_term=boot+manager+lite
Thank You For Your Support​

is it like a dual boot on pc?

ralphvalmeo said:
is it like a dual boot on pc?
Click to expand...
Click to collapse
Never had a dual boot on pc

You are the man
Lalssa said:
Here Is How To Run Two Roms On The Same Device
Step One : Flash a Second ROM
You don't anything, make a nandroid backup of your current ROM with ROM Manager or through your recovery module. If anything goes wrong, you can always restore from this backup to get things back to the way they were.To set up BootManager, just download and install it from the Market, and start it up. You'll also want to grab a ROM of your choice and save the zip file on your SD card.When you first start up BootManager, it'll prompt you to back up your boot.img, which you should do before installing any ROMs. Once you've done that, head to "Install ROMs". Pick the zip file from your SD card containing the ROM you want to flash, and check all three boxes: Wipe System, Wipe Data, and Wipe Cache. Let it do its thing (which will take a while). When you're done, it will give you the option of booting into your new ROM. Hit Done; we aren't ready to boot into it just yet.
Step Two: Install Google Apps and Other ROM Add-Ons
Most ROMs don't come with Google's copyrighted apps, like Gmail, the Market, and others. This is a problem, since when you boot into your new ROM you need BootManager to function if you ever want to boot out of it, and it won't work unless you're signed into the Android Market. Luckily, there's an easy fix (note: if you know your ROM comes with Google Apps installed, you can skip this step).Download the Google Apps zip file for the ROM you just installed and go back to BootManager. Hit Install ROMs. This time, pick Google Apps' zip file, and use the same slot that you used in step one. Leave all three "wipe" boxes unchecked this time. When it's done, booting into that slot will take you to the original ROM, but with the Google apps installed.If you want to install a theme or other zip-based mod in the future, you can do that using this method too. Just remember: if you're flashing a new ROM, check all three "wipe" boxes, but if you're just installing an add-on to a ROM, don't check any of them.
Step Three: Switch Between ROMs
To boot into one of your other ROMs, just head into BootManager and choose "Boot Installed ROM". It'll show you a list of ROMs you have installed on your device, and after choosing one of them it will reboot into that ROM. BootManager will come installed on each of your other ROMs as well, and as long as you're signed into the Android Market on that ROM, you can boot into it from there as well and switch back to your main ROM.That's it! You can flash up to five ROMs at a time, so you'll never be bored by one measly operating system. Hit the link to download BootManager.BootManager is a $2.99 download for Android 2.1 and up. See the Market page below for officially supported devices.
Thank You For Your Support​
Click to expand...
Click to collapse
Thank you very much, it worked

thanks for sharing i had no idea you could do this. i always have multiple back ups of different roms and just restore but this is awesome . i will try this tomorrow. :good:

sonyachin said:
thanks for sharing i had no idea you could do this. i always have multiple back ups of different roms and just restore but this is awesome . i will try this tomorrow. :good:
Click to expand...
Click to collapse
Don't forget to backup

will it work for Huawei ascend g510-0200 ?

Related

[ROM] DI14 Pick-n-Pack 0.2 ROM

DI14_pick-n-pack_0.2 ROM for the Samsung Mesmerize
I have reworked this ROM to make it a little easier to work with. In the 0.2 version, you will be able to flash the main package without any need to add files like in the 0.1 version. As for the removed apk files, they are now flashable either individually or in packs depending on what they are. I felt this would be an easier way to still get what you want but not having to put things together before flashing.
I still recommend that you take a backup before you flash anything. I am not responsible for any damage you do to your phone while flashing any or all parts of this ROM. I also recommend that you download both the ROM and Addons at the same time so that you do not have to wait for a second download after you have already flashed the ROM.
Also, to be clear since there has been confusion, MMS is 100% functional in this ROM because it uses stock MMS, not AOSP.
*****This ROM contains these apps:
ADW Launcher
Browser
Camera
Clock
Contacts
Gallery
Gmail
GTalk
Latitude
Maps
Market
MMS
Music Player
My Files
Navigation
Phone
Places
Quick Boot
ROM Manager
Settings
Superuser
Task Manager
Titanium Backup
Video Player
Voice Search
*****Files in the Addon Packs
AllShare
BuddiesNow
Car Cradle
Daily Briefing
Days
Desk Cradle
Dual Clock
Email and Yahoo EMail Pack
Facebook
Galaxy Help
Live Wallpaper Pack
Memo
Mini Diary
My Contacts Backup
MySpace
Samsung Weather, Stock, Calander Pack
ThinkFree Office
Tone Room Deluxe
Touchwiz Calander, Calculator Pack
Voice Commands
Wireless Modem
Write and Go
*****IF YOU HAVE VOODOO INSTALLED, DISABLE LAGFIX FIRST*****
Download the ROM and Addons. Unzip the Addons and decide which packs you want to flash. Put the ROM and individual Addons on your sdcard and boot into recovery. Flash the ROM first. Then you can flash the Addons individually. When you are done, reboot. If the phone hangs at the boot animation for more than 5 minutes, pull the battery, do three button to get back to recovery and do a data wipe/factory reset. Reboot and things should be fine.
DI14_Pick-n-Pack_0.2.zip: http://www.megaupload.com/?d=TFT2TOF0
MIRROR: http://www.mediafire.com/?3tzqutyxm2ki701
Addons.zip: http://www.megaupload.com/?d=J8NFAHZV
MIRROR: http://www.mediafire.com/?msdaa5rhdl2issi
This is exactly what I'm looking for. Would I be able to install facebook from the marketplace?
skitzo_inc said:
This is exactly what I'm looking for. Would I be able to install facebook from the marketplace?
Click to expand...
Click to collapse
I don't see why not.
Awesome! I'm reading up some more on how to flash these roms in and I plan on using this one. I'm new to this and just learning.
I installed ROM Manager and installed "flash clockworkmod recovery" (it said I had to) and then I clicked backup current ROM. I have tried twice, and it said failed each time.
I'm afraid to try it again, as I don't want to ruin my phone.
Any ideas?
skitzo_inc said:
I installed ROM Manager and installed "flash clockworkmod recovery" (it said I had to) and then I clicked backup current ROM. I have tried twice, and it said failed each time.
I'm afraid to try it again, as I don't want to ruin my phone.
Any ideas?
Click to expand...
Click to collapse
Try going in to recovery by turning off the phone, hold the power and volume down button. Once in recovery, select apply sdcard:update.zip. That should get you get you to clockwork recovery. From there select install zip from sdcard and then choose zip from sdcard. Find the zip and flash it.
Let me know if that works.
phidelt82 said:
Try going in to recovery by turning off the phone, hold the power and volume down button. Once in recovery, select apply sdcard:update.zip. That should get you get you to clockwork recovery. From there select install zip from sdcard and then choose zip from sdcard. Find the zip and flash it.
Let me know if that works.
Click to expand...
Click to collapse
Should I do a backup first?
skitzo_inc said:
Should I do a backup first?
Click to expand...
Click to collapse
If you've already done one backup, you're ok. If not, go ahead and do one.
phidelt82 said:
If you've already done one backup, you're ok. If not, go ahead and do one.
Click to expand...
Click to collapse
When I do the backup it says it failed.
skitzo_inc said:
When I do the backup it says it failed.
Click to expand...
Click to collapse
I sent you a PM.
Everything works. Installed without a hitch, has all the programs gone that I wanted and kept the ones I wanted by switching them to the correct folder.
This guy got on chat with me and walked me through step by step, great guy with a great ROM!
Im liken it thanks....
Nicely done my friend this just gives people more options thank you....
androidman78 said:
Nicely done my friend this just gives people more options thank you....
Click to expand...
Click to collapse
Thanks. That was my thinking. A lot of people were asking for apps to be put back in to jt's super clean ROM so I figured this was the easiest way that anyone could just drop in what they want and it would be custom tailored to their needs.
Since I've seen over 200 people look at the page but only 2 download the package, I'm thinking that there's got to be something to the hesitation. Feedback is welcome here, and encouraged. If this is too scary and people want something that they can just flash, throw some ideas out to me. I'm definitely open to suggestions.
I think the holidays may have something to do with it. Personally, I plan to use this once I get my phone rooted (for some reason z4root locks my phone up every time) But I want to wait until the rushing, travelling holiday is over because I cant go without my phone =)
I'm happy with the SuperClean Rom and Voodoo 5 right now, otherwise I'd have given this one a shot.
I'm still using this and I have had no issues. I like being able to choose which programs are going to be on my droid, instead of having all or none that I want.
I am getting same errors also..
I have done super one click..
Run Rom Manager and chose ROM it asks to reboot I get error.
When I choose SD update.zip it boots back into a image that has sceens that have black widgets.. All other Samsung and USSC stuff is still there as well as ROM Manager..
Sighcosis said:
I am getting same errors also..
I have done super one click..
Run Rom Manager and chose ROM it asks to reboot I get error.
When I choose SD update.zip it boots back into a image that has sceens that have black widgets.. All other Samsung and USSC stuff is still there as well as ROM Manager..
Click to expand...
Click to collapse
You have to do some work on the files to make ROM Manager working.
Get Clockwork Working
That will let you make the backup.zip and install from the SD card. Threw me for a loop as well.
One thing I do not want to lose or at least be able to find in another app is the SMART ALARM ..
I know... I got used to it in just a couple days. Love the way it sort of eased you awake instead of a full on GET UP..
So question would be. Which apk and dependencies would I need to keep and or anyone know of another app that would give me same with more options.

Sharp SH7218u

This thread is dedicated to hacking and development of the Sharp SH7218u. This is an Android phone with a somewhat unique clamshell form-factor.
Before proceeding, please note that all of the usual warnings apply. The software and techniques described here have the potential to break your device and make it unusable. By using the software and following these techniques you run the risk of bricking your phone. I take no responsibility if this happens - proceed at your own risk.
First, some credits for the work of others:
Z4root:
Developed by xda member RyanZA.
http://forum.xda-developers.com/showthread.php?t=833953
SH7218u Clockworkmod Recovery:
Clockworkmod original developer is Koushik Dutta:
www.clockworkmod.com
Dialer2:
Original developer of now open source dialer is dnaq Productions:
http://dnaq.tumblr.com/
Initial hacking and development work:
Gigi Tse is credited for early and ongoing work for the SH7218u:
http://gigitse.com/
http://www.msharp.cn/forum/t390991/page1/
Now on the instructions....
-------------------
Rooting Your Phone, Installing Clockworkmod Recovery, and Installing Google Apps
Gather the Required Files:
1. Go to the z4root xda thread, login in and download z4root.1.3.0.apk:
http://forum.xda-developers.com/showthread.php?t=833953
2. Download SH7218u_recovery.apk:
(attached below)
3. Download the Clockworkmod recovery flashable Google Apps file from the following site:
http://goo-inside.me/gapps
In the table, you want to select the HDPI, CyanogenMod 6 version. The file that you download should be
called 'gapps-hdpi-20101114-signed.zip'
4. Place these three files on your micro-SD card and insert the card into your phone.
Root Your Phone
1. Boot up your phone and skip the system setup wizard. Go to the app drawer and run 'Settings'.
2. Select 'Applications', and enable 'Unknown sources'.
3. Select 'Development', and enable 'USB debugging'.
4. Exit back out to your home screen launcher, then go to the app drawer and run 'ES File Explorer'.
5. The file explorer should show you the contents of your sd card. Tap on the file 'z4root.1.3.0.apk'.
6. Confirm installation of z4root, and when this is complete select 'Open' to run the app.
7. From within z4root, press the 'Permanent Root' button.
8. Wait until this process is complete, and the phone will reboot by itself. It can take 30 seconds or so for this to happen, so be patient. You are now rooted.
Flash Clockworkmod Recovery Image
You must be rooted for this to work. Do this after you have successfully completed the rooting process above. Also please note that this is not the CWM recovery image developed by Gigi Tse. Her image contains CWM version 3.0.2.4. This is my recovery image and contains CWM version 5.0.2.8.
1. Open the app drawer and run 'ES File Explorer'.
2. Tap on the file 'SH7218u_recovery.apk'.
3. Confirm installation and run the application by selecting 'Open' once installation is complete.
4. On startup, the application will request Superuser privleges - press 'Accept' to allow this.
5. Press the 'Flash Clockworkmod Recovery' button.
6. Wait a few seconds until you see the confirmation message 'Recovery Flash Complete'.
7. Exit out of the application. You now have Clockworkmod as your recovery. You can uninstall the SH7218u_recovery app if you wish as you have no further use of it.
Note for users of Link2SD: This version of Clockworkmod recovery will perform backup and restore operations on the secondary SD card partition used by Link2SD. However, that partition must be formatted in the ext3 filesystem for this to work. Formatting the partition in any other filesystem (e.g. ext2, fat32, ext4, etc.), will result in failure to mount and backup the partition. An SD card can be prepared for use with Link2SD from within this version of Clockworkmod recovery by using the 'Partition SD Card' feature within the 'Advanced' menu.
Install Google Apps
1. Boot into Clockworkmod Recovery. This is done by powering down your phone, then turning it back on by pressing and holding down the number 3 and 6 buttons together, then pressing and releasing the power button. Continue to hold the number 3 and 6 buttons until you see the Clockworkmod screen.
2. Select 'install zip from sdcard' from the menu.
3. Select 'choose zip from sdcard' from the next menu.
4. The next menu will be the contents of your sdcard. Select the Google Apps file - 'gapps-hdpi-20101114-signed.zip'.
5. Confirm the installation and wait until it is complete.
6. Press the back button once to get back to the main screen and select 'reboot system now'. You now have Google Apps installed.
When you reboot the device, you will be taken through the Google account setup. Please note that in order for contacts applications to work with Google synchronization, you will need to install a modified contact editor. The stock firmware on this phone is not intended to sync with the Google servers as it was intended for Chinese users. The modified contact editor fixes this issue. It is free and available from the Market. Look for 'Contact Editor Free' by a developer named 'dmfs'.
Deleted
Deleted
Thank you! Very good job!
No ideas how to get the phone to answer a call when you open?
TabletGuru said:
Thank you! Very good job!
No ideas how to get the phone to answer a call when you open?
Click to expand...
Click to collapse
Hey someone read my thread!!
Sorry, no posts on this thread yet and it has been up for a while. I think most people who have this phone stick to Howard forums or other such sites that cater to the phone type and its region of origin.
As for your question, no...but I have tried. That would require a modification of the phone app or a change to the OS itself as the phone app is the active app when the phone is ringing and the device is opened. If I had the source code for the stock phone app, this would be a fairly easy thing to do. Unfortunately, I have been unable to find the source for the stock device firmware anywhere. I tried compiling a generic Froyo phone app from the Google source, but of course this did not work. This is a somewhat special app that needs to interface with several parts of the device's hardware, so a generic version just doesn't work. Unless Sharp releases the full source code for the stock firmware, I don't think this is going to be possible....at least not from someone with my somewhat limited development abilities.
Sent from my MB855 using xda premium
Google Play
Hey xdajunkman, amazing work you are doing here.
Have you considered adding Google Play to the mix? I was able to get the latest version working just fine on my SH7218u.
How hard would it be to hack the light notifications area of the phone, to make some of the notifications last for 1-2 seconds longer?
I should also add that my phone is giving some really flaky GPS information. It is putting me somewhere in the ocean near China unless I use wifi only. Do you have any experience with this?
EDIT: I don't know why, but the dialer is not working for me with regard to the long-press of the delete key and silent (#) key. No idea why...
EDIT2: It is because I had another keyboard installed; which must do something funky... switching back to a default keyboard and then trying seemed to work!
Thanks for your guide! Do you have got new version Rom? 2.3 or 2.3.5?
johnny8384 said:
Thanks for your guide! Do you have got new version Rom? 2.3 or 2.3.5?
Click to expand...
Click to collapse
Not likely to come. This would mean building something like CM7 for a new device from scratch. This kind of task takes dozens of man-hours for an expert developer, and that assumes that they have access to the original source for the release build. We do not have the original source, and there is no such developer working on this device. We will be stuck with Froyo.
Thank you so much for taking the time to write a guide xdajunkman!
I received my SH7218u today and did everything. The instructions were clear and the whole process took no more than 30 minutes.
Surprisingly, my SH7218u accepts 64 microsd card (after you format it).
Is it ok to have 2 partitions?
One is a ext2, and the other I just created using clockwork mod ext3...
I'm wanting to use that custom rom..
EDIT: clockwork mod Repartitioned my ext2 to ext3 now ಠ_ಠ
and all my apps are "installed"
Going to make a backup rom now.. and then Install xdajunkman's custom rom >__<
EDIT: Ok succesfully installed the Custom rom It looks great I might say awesome work xdajunkman
Ok the question is now.. how to I get back all my previous apps and stuff?
I followed the guide and made a backup already
My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps ( don't remember exactly) what i've to do now? plz help me
P/S: My english sucks, sorry for that
delpan said:
My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps ( don't remember exactly) what i've to do now? plz help me
P/S: My english sucks, sorry for that
Click to expand...
Click to collapse
Boot into clockwork mod by pressing 3and 6 and the power on button, (assuming you have that installed)
Reinstall the rom.. http://forum.xda-developers.com/showthread.php?p=22106340#post22106340
sirjoe1 said:
EDIT: Ok succesfully installed the Custom rom It looks great I might say awesome work xdajunkman
Ok the question is now.. how to I get back all my previous apps and stuff?
I followed the guide and made a backup already
Click to expand...
Click to collapse
It is usually just easier if you wait until you have the new ROM installed before you try and install your apps. There is no reliable way from within CWM to restore your installed apps.
However, because the new ROM is just a modified version of the stock ROM, it should be possible to flash the new ROM without wiping the existing user data and keeping your installed apps. Restore your backup that has all of your apps installed. Then, flash the modified ROM but skip the step in the instructions that tells you to wipe existing user data. Instead of wiping the user data, do the following:
1. In the 'mounts and storage' menu of CWM recovery, select to format both '/system' and '/cache'
2. In the 'advanced' menu of CWM, select 'Wipe Dalvik cache'
Now proceed with installing the ROM as per the instructions. This should result in the modified ROM being installed, but all of your installed apps should be protected.
If this does not work, then you will just have to re-installed the modified ROM according to the instructions (including wiping the existing user data), then re-install all of your apps. For future reference, a great app called Titanium Backup will allow you to backup your apps and restore them after changing the ROM.
sirjoe1 said:
-->My 7218u stuck at Sharp logo when boot because i've uninstalled a system apps
-->( don't remember exactly) what i've to do now? plz help me
Boot into clockwork mod by pressing 3and 6 and the power on button, (assuming you have that installed)
Reinstall the rom.. http://forum.xda-developers.com/showthread.php?p=22106340#post22106340
Click to expand...
Click to collapse
Agree with sirjoe1. Hopefully you flashed CWM as your recovery before you did this. However, if not then booting into recovery mode as described above should trigger a factory reset from the stock recovery partition. I have not attempted this myself with the stock recovery, but usually what this will do is simply return your device to it's stock state. You can then start over using the instructions in the OP....but without deleting critical system apps this time.
Hello again, I've a question, has anyone successfully Overclocked the cpu frequency on this phone using setcpu or similar apps?
Overclocking not possible without either a custom kernel or a kernel module of some sort. As the source for the stock kernel was never released, such a thing would be a HUGE undertaking. Very unlikely to ever happen.
xdajunkman said:
Overclocking not possible without either a custom kernel or a kernel module of some sort. As the source for the stock kernel was never released, such a thing would be a HUGE undertaking. Very unlikely to ever happen.
Click to expand...
Click to collapse
Oh darn, that's such a downer..
These sh7218u threads are so dead nowadays :/
I might have messed up my phone -_- (again)
I went into the /data/sdext2/dalvik-cache and deleted everything and now a few apps have gone missing, and some won't work, they just give me a force close error >___<
I also lost my go launcher ex settings..
and to make things worse.... my internal memory went to 0% free... deleted a few things to clear up 8mb..
Any Ideas how to fix this ? @[email protected]
[Can you guys play 480p videos?
I can't.. 360p runs fine though..]
I am hoping to get this device this week.
Thanks for your tutorial, and I will let you know if it runs out just fine

[REF] 30 Steps from GB to ICS ROM

I've gone from my long time TPC v3 to various ROMS and recently, ICS ROMs multiple times over the last few weeks. After a myriad of gotchas encountered, I wrote down this list of things to do in 30 steps and I thought I'll share the list. Where ever applicable, I've included the reason why the step is there which of course based on my (bad) experience.
Please feel free to add any additional steps you find missing and do hit me up with a Thanks if you find this useful.
1. Check space availability on internal SD
(Error handling and messages are lacking, it would be crippling if your backups or downloaded zips are incomplete)
2. Do a full Titanium backup
(take two if you have the space and just to be safe)
3. Do a nandroid backup via ROM Mgr or CWM
4. Download the target ROM
5. Download other ROMs (optional)
6. Download the radio (if needed, some are baked in)
7. Download the kernel (if needed, some are baked in)
8. Download other zips, boot animation e.g. (optional but should be done much later)
9. Download other scripts if needed like Darkside wipe (recommended)
10. Boot into CWM (either through ROM Mgr or button presses)
11. Install the radio zip (if needed)
12. Do the wipe dance, factory reset, cache, dalvik wipe, /system, /data, /cache, Darkside e.g
(see ROM instructions)
13. Install the ROM zip
14. Install the kernel zip if needed
15. Reboot
16. Let it sit for a few mins
17. Login into Market, exit and wait for Market to morph into Play Store
18. Update Titanium through Play Store (If not, TiBu may hang on some app restore or not start at all)
19. Download ROM Toolbox, change resolution and reboot (optional)
20. Setup wifi so you don't incur data usage
21. Mark sure other sources is checked
22. Run Titanium batch restore, missing apps only
23. Reboot
24. Let it sit for a few more mins
25. Run update/update all in Play Store, Amazon App Store e.g.
(This brings the apps up to ICS compatible versions if present)
26. Some apps may require re-installations
27. Some apps may be missing and require installation
28. Some apps may require re-setup (Juice Defender, Widgetlockers, widgets in general)
29. Setup security, face, pin, pattern locks, timeout value
(Re-setup required on new ROMs)
30. Re-setup and re-sync Sugarsync (optional)
Nice list, good stuff!
I'd do step 6 and 7 regardless because I like to have a backup of a working kernel and modem always incase I need to reflash them.
Oh and check out the app appextractor, it's good for restoring sms from nandroid provided the backup was the same OS version.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
kr3w1337 said:
Nice list, good stuff!
I'd do step 6 and 7 regardless because I like to have a backup of a working kernel and modem always incase I need to reflash them.
Oh and check out the app appextractor, it's good for restoring sms from nandroid provided the backup was the same OS version.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
Yeah, that's what I do too. I have at least one modem, kernel, boot anim, wipe script and several ROM zip files sitting there just in case I need to use it. When the phone is bricked (for various reasons) the last thing you'll need is to do the setup (download, copy e.g.) just to get the files there.
you should set some time out and do a guide like this for all the sammy rom forums on xda, I know it seems alot, but you mentioned alot in there that I didnt think about that would have save me some heartache...
just a generalized guide, nothing too fancy with definitive radios, etc...
Nice list.
Very helpful info.
I'm digging your terminology "do the wipe dance".
I typically pull the external SD card before wiping or flashing anything... it may not be necessary, but it's a huge PITA if I lose the data.

help me?

Hello everyone i just got my first android phone HTC ONE X with AT&T and I'm new to the whole android community my old phone was a iPhone and so far i love the one x a lot more then my iPhone.... anyway i rooted my phone and unlocked the boot-loader and now i don't know what/how to do. i know about roms but i don't know of any good ones, so if anyone can help me by telling me what exactly i can do with my rooted phone and tell me about roms any information will be helpful
Thank You,
SMGrair
you need twrp recovery to flash roms.you can flash them 10 times a day.
All Sense 4.0 ROMs here is stable for daily use becase they are based on official ruu.
I highly suggest aokp and then flash cm10 when it gets more stable. Also get titanium backup.
Welcome! I was new to all of this pretty recently as well but you'll find this community to be extremely helpful. The good thing is you already did the hard part, flashing roms on this device is very easy as long as you take the necessary precautionary steps. Since there is so much information on this forums, I know how hard it is to find simple answers at times with them being scattered all over the board and all so I'll just give em to you here
First off, make a "nandroid". Turn off your phone, then hold the power and volume down key until you get into boot loader mode. Then simply navigate the options to make a backup of your phone, very simple you've just made a "nandroid". Next boot your phone normally, go into the play store and search for and download the following apps:
1. Goomanager
2.SMS backup and restore
3. Titanium backup ( pay for the pro version if you don't want to reinstall every app one by one)
First run goomanager, it will ask for super user access, grant it. Then you need to install twrp (a third party recovery program that is preferable for our devices over cwm because it gives less problems) through goomanager by hitting the menu option while in the app and selecting "install open recovery script".
Once that is done open titanium backup and hit the little check mark at the top right, choose the option to "backup all user apps". Don't backup system data because if you restore system data when you flash a new rom it will give you problems since it is a whole new system, make sense right?
OK now open SMS backup restore and backup all your text messages that you don't want to lose. Make sure u sync all your contacts to your Google account for easy recovery as well.
Now you're ready to flash a rom. I suggest either aokp (which I use and love daily) or cleanrom if you want a stock experience without bloatware. I prefer aokp because I love aosp, the way android was meant to be and it doesn't kill your apps as soon as you leave then.
Either way you can try both and decide for yourself.
Download the rom zip file and transfer them to your phones memory, I usually put the rom zip files in a folder labeled "roms". You also want to download and transfer a zip called "gapps". There are the stock Google apps and you will flash it after flashing your rom.
OK now just reboot your phone, select reboot into recovery and it will restart and take you to twrp. Then you need to do a factory reset first (I do it twice) then wipe dalvik and cache (I do this before and after flashing the rom to be safe), then just hit install, navigate o the folder where you put the rom zip in and hit flash. Then flash the gapps zip once the rom is done flashing then wipe dalvik and cache again and voila you have a new rom on your phone! So just reboot the phone and youre golden.
Download titanium backup again and use that to restore all your apps, then SMS backup to restore texts and that's it. Good luck man hope this helped since it definitely would've helped me when I first started. Have fun and feel free to ask around if you have questions or just pm me and I'll try to help as best as I can.
Sent from my One X using xda app-developers app running AOKP like a bauss.
i have Clockwork Mod......so should i get twrp recovery and can someone tell me the the differences Clockwork MOD vs TWRP?
SMGrair said:
i have Clockwork Mod......so should i get twrp recovery and can someone tell me the the differences Clockwork MOD vs TWRP?
Click to expand...
Click to collapse
You must use openrecovery-twrp-2.1.8.1-evita.There's been an accident with cwm (ported recovery)+aroma+God knows what=no sim card detection forever.
twrp-2.1.8.1 is stable,does everything you need,keep it that way.
And try to stay away from radios and recovery changes/updates.
And yes,to have HTC Device and use Senseless ROMs does not make sense at all...
flash a Sense rom to start then go venture out into the aosp world once they are stable. There are many roms to choose from. Just be sure to read the OP before flashing and if you have questions about the rom it self, ask in that forum too.
Good luck and welcome to Android
ok cool thank you all
vin255764 said:
You must use openrecovery-twrp-2.1.8.1-evita.There's been an accident with cwm (ported recovery)+aroma+God knows what=no sim card detection forever.
twrp-2.1.8.1 is stable,does everything you need,keep it that way.
And try to stay away from radios and recovery changes/updates.
And yes,to have HTC Device and use Senseless ROMs does not make sense at all...
Click to expand...
Click to collapse
Well,I wouldn't say that, HTC makes great hardware, incredible build quality, others...not so much.to me running senseless HTC makes plenty of sense
Sent from my HTC One X using Tapatalk 2
[email protected] said:
Well,I wouldn't say that, HTC makes great hardware, incredible build quality, others...not so much.to me running senseless HTC makes plenty of sense
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I agree.. used to love sense. Even used the sense dream board themes on iphone haha... Once I got past my honeymoon period of my first real android, I'm all for aosp.. makes a great deal of sense to me
Sent from my HTC One XL using xda app-developers app
What AOKP ROM do you use and why?
atticusmas said:
I highly suggest aokp and then flash cm10 when it gets more stable. Also get titanium backup.
Click to expand...
Click to collapse
What AOKP ROM do you use and why?
dalvarez0312 said:
Welcome! I was new to all of this pretty recently as well but you'll find this community to be extremely helpful. The good thing is you already did the hard part, flashing roms on this device is very easy as long as you take the necessary precautionary steps. Since there is so much information on this forums, I know how hard it is to find simple answers at times with them being scattered all over the board and all so I'll just give em to you here
First off, make a "nandroid". Turn off your phone, then hold the power and volume down key until you get into boot loader mode. Then simply navigate the options to make a backup of your phone, very simple you've just made a "nandroid". Next boot your phone normally, go into the play store and search for and download the following apps:
1. Goomanager
2.SMS backup and restore
3. Titanium backup ( pay for the pro version if you don't want to reinstall every app one by one)
First run goomanager, it will ask for super user access, grant it. Then you need to install twrp (a third party recovery program that is preferable for our devices over cwm because it gives less problems) through goomanager by hitting the menu option while in the app and selecting "install open recovery script".
Once that is done open titanium backup and hit the little check mark at the top right, choose the option to "backup all user apps". Don't backup system data because if you restore system data when you flash a new rom it will give you problems since it is a whole new system, make sense right?
OK now open SMS backup restore and backup all your text messages that you don't want to lose. Make sure u sync all your contacts to your Google account for easy recovery as well.
Now you're ready to flash a rom. I suggest either aokp (which I use and love daily) or cleanrom if you want a stock experience without bloatware. I prefer aokp because I love aosp, the way android was meant to be and it doesn't kill your apps as soon as you leave then.
Either way you can try both and decide for yourself.
Download the rom zip file and transfer them to your phones memory, I usually put the rom zip files in a folder labeled "roms". You also want to download and transfer a zip called "gapps". There are the stock Google apps and you will flash it after flashing your rom.
OK now just reboot your phone, select reboot into recovery and it will restart and take you to twrp. Then you need to do a factory reset first (I do it twice) then wipe dalvik and cache (I do this before and after flashing the rom to be safe), then just hit install, navigate o the folder where you put the rom zip in and hit flash. Then flash the gapps zip once the rom is done flashing then wipe dalvik and cache again and voila you have a new rom on your phone! So just reboot the phone and youre golden.
Download titanium backup again and use that to restore all your apps, then SMS backup to restore texts and that's it. Good luck man hope this helped since it definitely would've helped me when I first started. Have fun and feel free to ask around if you have questions or just pm me and I'll try to help as best as I can.
Sent from my One X using xda app-developers app running AOKP like a bauss.
Click to expand...
Click to collapse

How to flash your Tab 7 Plus (P6200) with the carbon rom and have google apps work

Hi all,
Obviously you need the Carbon ROM for the P6200 first. Here is the link http://forum.xda-developers.com/showthread.php?t=2723566
Step One: Unlock Your Bootloader and Flash a Custom Recovery
How to Flash a ROM to Your Android Phone
First, let's clear up some confusion: Contrary to popular belief, you do not actually need to root your phone to flash a ROM—you just need to unlock your bootloader and flash a custom recovery. However, this process usually goes hand-in-hand with rooting—and most custom ROMs come with root access—so what you think of as "rooting your phone" is probably what you're going to have to do first.
Unfortunately, we can't go through this step in detail here, because it's different for every phone! So, I highly recommend checking out our everything root guide to learn a bit more about what's involved, what all the different terms mean, and what to watch out for. Then, search around sites like XDA Developers for instructions on how to unlock the bootloader of your specific phone, which recovery you should use (usually TWRP or ClockworkMod), and how to flash it.
I also recommend rooting your phone during step one, since it'll make the backup process in step two easier—and save you some hassle along the way. A lot of methods and one-click apps will root your phone anyways, so it might be included in the process. Again, this can vary from phone to phone. (If the instructions require you to flash SuperSU.zip, you can refer to step three of this guide for info on how to do that—ironically, it's just like flashing a ROM).
NOTE: Unlocking your bootloader will most likely wipe your phone, and without root access, you won't be able to back up very much. So, save anything you want to keep on your computer—you will have to set up your phone from scratch just this once before continuing.
When you're done, return here and continue to step two for the rest of the ROMming process.
Step Two: Make a Backup of Your System, Apps, and Data
Now that you've got a custom recovery on your phone, the first thing you should do—before you ever make a big change to your system—is back it up. First, we'll make a Nandroid backup, which is basically a image of your current system. That way, if something goes wrong, you can restore your phone to exactly the way it was before you started tweaking. This will save you a lot of hassle if something goes wonky (which, let's be honest, can happen often). To do this:
Reboot your phone and enter recovery mode. This is a bit different on every phone, but usually involves some permutation of pressing the power and volume buttons at the same time.
Head to the "Backup" or "Nandroid" section of your recovery mode. The default settings should be fine. If given the option, give your backup a name that helps you remember what it is (like "Pre-CyanogenMod Backup 01-17-14"). Confirm your backup and let it run.
Wait for the backup to finish. This may take awhile.
I also recommend making a second type of backup: your apps and settings. If you just unlocked your bootloader and wiped your phone, you can skip this step, but any time you flash a ROM in the future, you'll want to back up your apps first, since you may have to wipe your phone before you flash. With a backup, you can easily restore those apps and data after flashing, making the process a lot simpler. We recommend using Titanium Backup.
How to Set Up a Fully Automated App and Settings Backup on Android
In an ideal world, your Android's apps, their settings, and your system settings would…
Read more
How to Flash a ROM to Your Android Phone
This is different from a Nandroid backup because it just backs up the apps themselves, which you can then restore on any ROM you want. Nandroid backups take your entire system as it is, ROM included.
Note that you'll need to be rooted to use Titanium Backup (which is why I recommend you root in step one). To perform a backup in Titanium:
Open Titanium Backup and grant it root permissions if it asks for them. If it experiences any problems with root, it'll tell you right now.
Tap the "Batch" button in the upper right-hand corner (the one that looks like a little checkbox). Scroll down to the "Backup" section and find "Backup All User Apps." Tap the "Run" button. This will back up any apps you've downloaded from the Play Store, and their data. (You can try backing up your system data as well, but I find this usually doesn't work very well).
Wait for it to finish. If you like, you can also sync these to Dropbox as described here, but you don't have to for this process.
This may seem like a lot of unnecessary backups, but trust me: it's going to save you a lot of time in the long run. Now if something goes wrong, you have a nandroid backup to fall back on and don't have to start from scratch. And, when your ROM flashes successfully, you don't have to start re-downloading and setting up all your apps yourself because you can restore them with Titanium.
Step Three: Download and Flash the ROM of Your Choice
How to Flash a ROM to Your Android Phone
Now comes the fun part: flashing your ROM. First, obviously, you need to find the ROM you want. Again, this chart is a good place to start, as is our list of the five most popular. You may also want to poke around sites like the XDA Developers forums to see what's available for your particular phone.
When you've found a ROM you want to try, download it and save it to your phone. It should come in the form of a fairly large ZIP file, so you'll probably want to be on Wi-Fi to download it. You can either download it directly from your phone, or download it on your computer and transfer it over via USB.
To flash your ROM:
Reboot your phone into Recovery mode, just like we did back when we made our Nandroid backup.
Head to the "Install" or "Install ZIP from SD Card" section of your recovery.
Navigate to the ZIP file you downloaded earlier, and select it from the list to flash it.
Wait for the process to complete; it may take a few minutes.
Depending on your situation (see below), you may also need to wipe your data and/or cache. In TWRP, you'll find this under the "Wipe" section, and in ClockworkMod, you'll need to either choose the "Wipe Data/Factory Reset" option or the "Wipe Cache Partition" option. When you're done, you're free to reboot into your new ROM.
So, when should you wipe your data and cache? Here are a few general guidelines:
If you're flashing a ROM different than the one you're currently running, you should wipe data and cache. Essentially, this performs a factory reset on your phone, and you will lose all your data.
If you're flashing a new version of a ROM you're already running, we recommend wiping your data and cache—but you should be able to get away with just wiping the cache, meaning you get to keep all your apps and settings.
Remember, if you backed everything up with Titanium, then doing a factory reset isn't all that bad, since you can just restore most of it. Keep in mind that even if you're just upgrading your existing ROM, factory resets can be helpful. If you only wipe your cache, note that a few apps may run into issues, but reinstalling them or wiping that app's data usually fixes the problem.
When you reboot, you should be in your shiny new ROM, ready to play! But what? There's no Play Store? Read on for the last step of the process...
Step Four: Download and Flash Google Apps
How to Flash a ROM to Your Android Phone
Because Google's apps are not open source, custom ROMs can't bundle Google's apps—like Gmail, Hangouts, or the Play Store—with their ROMs. That means you'll need to download and flash them separately. Luckily, this is pretty easy to do: just head to this page on RootzWiki to find out which ZIP file you need, download it to your phone, and flash it just like you did the ROM in step three. Gapps Manager is also a great app that'll help you find the right package if you're stuck, and you can download the APK from XDA Developers.
Gapps Manager Gets You the Right Google Apps for Your Rooted Phone
Android (Rooted): If you root your phone and install a new ROM, the first thing you may notice is…
Read more
Once you've flashed the latest Google Apps package, you should be all set! You'll have a new ROM with tons of settings to play with, the Play Store to download new apps, and—if you made a backup with Titanium—you can now head into Titanium Backup and restore all your apps and their settings. Enjoy!

Categories

Resources