Related
Finally, after several tests, experiments, and cursing the Rom ANIMUS 1.1.9 and ready
the rom does not want to be the best rom around for our device
ANIMUS was created to give everyone the chance to cook their own rom modding and staff.
the basis of the Rom is 2.3.6 I think the most powerful device for our
Roma is a technically stocks, but lighter, eco additions:
Android 2.3.6 (Gingerbread)
zipalign
Busy box
deodex
enabled bash
app2sd enabled
The ROM is significantly lighter than the basic
installation
1.Download the rom
2.mettere the file to the sd of the device
3.disconnect the device from the PC and turn it off
4.Switch in recovery
5.nel recovery menu to wipe ALL
6.go sd card for installation in the menu and scroll to find the file of the Rom
7.lanciare the installation
8.alla end of the recovery procedure to restart the system
this is the link http://www.megaupload.com/?d=RSVBW3HS
end!
this rom with the kitchen and customizable dsixdia easily ...
tell you guys .. a small step was taken to work. good luck to all the dev!
I do not assume any liability you do so at your own risk
thanks:
scupinatos for availability and kindness
morfes for advice and pazienzaaaaa
qzem ready for answers to any time of night and day
Raidzero for the recovery that has allowed us to get this far
Enjoy
Sorry for my bad English
have you benchmark it?
gymnastiar said:
have you benchmark it?
Click to expand...
Click to collapse
Off course! Personally tested
can u upload the screen shot plizzz . . .
mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping
Can you upload some screenshot please??..Thank a lot..
Can you reach the Download Mode ?
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E
THE-E said:
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E
Click to expand...
Click to collapse
i can reach the download mode ..
tell me how then.
jayidoans said:
i can reach the download mode ..
tell me how then.
Click to expand...
Click to collapse
First I need to know from where you are, because there are different firmwares. Or are you anyway going to flash the custom firmware again ?
THE-E said:
First I need to know from where you are, because there are different firmwares. Or are you going to flash anyway the custom firmware again ?
Click to expand...
Click to collapse
i'm from indonesia ..
if possible i want to try this custom ROM .
jayidoans said:
i'm from indonesia ..
if possible i want to try this custom' ROM .
Click to expand...
Click to collapse
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.
THE-E said:
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.
Click to expand...
Click to collapse
thanks for your response bro
anyway, is there any download site that's not limiting download speed ?
like mediafire or something ?
any screenshot of this custom rom?
jayidoans said:
mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping
Click to expand...
Click to collapse
Have you wiped everything before flashing? You should if you haven't.
qzem said:
Have you wiped everything before flashing? You should if you haven't.
Click to expand...
Click to collapse
I had ..
Wipe all + another wipe before doing the update from SD card ..
and the result is Boot Looping.
now i'm trying to flash to stock ROM .
guys I did not put any screenshots just because it's identical to the stock rom
for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.
snake873 said:
for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.
Click to expand...
Click to collapse
i think that there is no difference between euro or asia rom .
but i cant install your custom ROM,
as i said before, it stuck at boot looping
and anyway, for App2SD mods,
should i have a microSD card installed ? and should i format it as ntfs and ext3 ?
how much the quadrant score for this rom?..My stock rom only get 1199.
lvoonjian8888 said:
how much the quadrant score for this rom?..My stock rom only get 1199.
Click to expand...
Click to collapse
You do know that Quadrant scores mean nothing right?
As Chainfire once said: "However, if you put any trust in Quadrant scores you could use them to prove that dancing naked for 5 minutes in your garden affects device performance."
Hello i have make a tar flashable one package for odin with the original bootloader logo of Galaxy Teos :
It's a bootloader modified for Galaxy 3.
/!\ Flashing bootloader can brick your phone! /!\
Preview :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How apply this tar :
- Open odin with administrator rights
- Select ops of Galaxy 3
- Tick One Package
- Select teos.tar
- Start the flash
/!\ This file can render your phone unusable /!\
I'm not responsible if your phone does not work any more !
Press Thanks if I helped you !
MmegaMac said:
Hello i have make a tar flashable one package for odin with the original bootloader logo of Galaxy Teos :
It's a bootloader modified for Galaxy 3.
Preview :
How apply this tar :
- Open odin with administrator rights
- Select ops of Galaxy 3
- Tick One Package
- Select teos.tar
- Start the flash
/!\ This file can render your phone unusable /!\
I'm not responsible if your phone does not work any more !
Press Thanks if I helped you !
Click to expand...
Click to collapse
Any reason to include in the package anything more that just the logo? It's somewhat dangerous to flash bootloader.
Basically, you made a custom bootloader that a mobile user will see for a few seconds so that people can flash it and possibly brick their phones? It's a bit useless don't you think? Just my opinion because it's not worth risking your phone for a little bootloader that you can only see for a few seconds when you boot your phone.
tom3q said:
Any reason to include in the package anything more that just the logo? It's somewhat dangerous to flash bootloader.
Click to expand...
Click to collapse
I have try to just include logo.png but don't work
MicroGeek said:
Basically, you made a custom bootloader that a mobile user will see for a few seconds so that people can flash it and possibly brick their phones? It's a bit useless don't you think? Just my opinion because it's not worth risking your phone for a little bootloader that you can only see for a few seconds when you boot your phone.
Click to expand...
Click to collapse
I have tested on my phone and it works !
MmegaMac said:
I have tested on my phone and it works !
Click to expand...
Click to collapse
Yes but a bootloader can brick a phone so it's not worth the risk. I think you should mention that a bootloader can brick your phone in the first post so that a new person to the forums doesn't decide to flash it without knowing the risks.
MicroGeek said:
Basically, you made a custom bootloader that a mobile user will see for a few seconds so that people can flash it and possibly brick their phones? It's a bit useless don't you think? Just my opinion because it's not worth risking your phone for a little bootloader that you can only see for a few seconds when you boot your phone.
Click to expand...
Click to collapse
Why are you so critical to everything what are making for g3? Aren't you afraid of flashing customs because of breaking your phone? It can happen one day:laugh:
BTW... Why are you changing bootanimation from stock to custom? It for a few seconds too I'm too tired of stock gt-i5800 logo... Let MmegaMac go on this project
Sorry for OT
MicroGeek said:
Yes but a bootloader can brick a phone so it's not worth the risk. I think you should mention that a bootloader can brick your phone in the first post so that a new person to the forums doesn't decide to flash it without knowing the risks.
Click to expand...
Click to collapse
He just wrote that's a risk...
sad96 said:
Why are you so critical to everything what are making for g3? Aren't you afraid of flashing customs because of breaking your phone? It can happen one day:laugh:
BTW... Why are you changing bootanimation from stock to custom? It for a few seconds too I'm too tired of stock gt-i5800 logo... Let MmegaMac go on this project
Sorry for OT
He just wrote that's a risk...
Click to expand...
Click to collapse
I was expressing the risk. He didn't specifically say that flashing a boatloader has a higher risk of bricking your phone and I mentioned that so he could write it and a noob doesn't come to the forums and flash the .tar without knowing the risks first. Secondly, I haven't manually changed my bootanimation, i change custom ROMs which automatically changes the bootanimation but i change because of the ROM, not because of the animation. I wasn't intending to criticise anything, I just didn't see a point in doing it and i wanted him to specifically mention about bootloader risks in the OP.
Edit: Oh yeah, i've flashed a trillion custom ROMs and also flashed stock ROMs with bootloaders many times so I don't think i'm scared of bricking my phone... I just want people to know the risks because taking a plunge and jumping to conclusions.
Useless and not worth risk.
Well more than a minor eye candy, it's pretty useless.
Each is free to make what he wishes on his telephone. If you don't want to make it, don't make it but do not prevent the other persons from making it !
Thanks for mentioning about bootloader risk in the OP.
AFAIK simply flashing the png file should be enough, as far as I know how Sbl works. Please try a bit more, as it should work.
BRO CAN U TELL ME in which fonts are those texts written? i mean teos word ? i wanna make one for my apollo. so
---------- Post added at 08:31 AM ---------- Previous post was at 08:21 AM ----------
nice work.... i wud appreciate it.... thnx for this. xda is all about modding and customizing our fone be it a minor or a major customization. thnx good work. dont get demotivated ecoz of some useless demotivating people . only thing is before doing anything mention all the risks .
---------- Post added at 08:33 AM ---------- Previous post was at 08:31 AM ----------
tom3q said:
AFAIK simply flashing the png file should be enough, as far as I know how Sbl works. Please try a bit more, as it should work.
Click to expand...
Click to collapse
tom i tried as u said but thee logo remains unchnged.
working in my phone thanxx a lot,, good work man
i edited ur image to this
and put it inside the tar using total commander. but when i flash it i get the teos logo .... i think i didnt edit it properly maybe theres some procedur ei missed while editing the image.... can u plz make it wrk?
aarrun said:
i edited ur image to this
and put it inside the tar using total commander. but when i flash it i get the teos logo .... i think i didnt edit it properly maybe theres some procedur ei missed while editing the image.... can u plz make it wrk?
Click to expand...
Click to collapse
I am going to try to create it for you
Sent from my GT-I5800 using xda app-developers app
aarrun said:
i edited ur image to this
and put it inside the tar using total commander. but when i flash it i get the teos logo .... i think i didnt edit it properly maybe theres some procedur ei missed while editing the image.... can u plz make it wrk?
Click to expand...
Click to collapse
Try to flash this !
/!\ Flashing bootloader can brick your phone! /!\
EDIT : Doesn't work --> FILE REMOVED
Cool work, but risky do you mind telling me how it works.?
DIDNT WORK .... it shows teos only. actually theres some problem with the logo editing which i did. i think i edited it the wrng way maybe.
Post in this thread if you need help getting CM to work, or if you have a problem and need help.
This thread is about:
- Discussing Cyanogenmod on the Optimus 3D/ 4G thrill/... phones
- Asking questions about Cyanogenmod
- Answering questions posted here
- Ask for help, because you can't get it to work
- Help people who can't figure something out
This thread is made with the intent to solve these problems:
1. Not have (duplicate) threads spamming this subforum asking for help
2. Create a nice environment for the developer of CM, Arcee, to work with. He has already said that the previous solution was a mess.
Arcee is a great guy, but messy forums can be very frustrating.
I'll make a posting guide.
[highlight]WHERE TO POST[/highlight]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[highlight]Get the latest nightlies here![/highlight]
http://www.get.cm/?device=p920
My Problem:
No IMEI so .. no singnal!!
Flashed bernys files but didn't help!
Cm10 is so nice!
PLZ help me!
Sent from my LG-P920 using xda app-developers app
History? current version?
I'm coming Form 21e and flashed cm10 via cwm and everythimg works feine except Form im ei and little Problem... while listening Tod an sound i can't change loudness
Sent from my LG-P920 using xda app-developers app
Before moving from lg to cm10, you did not downgrade to 21d or similar? This, atm, seems to fix problems like the imei not showing based on input from the other users. Give it a try, make sure you do all the wipes etc. and it should work, it does here.
philivm said:
My Problem:
No IMEI so .. no singnal!!
Flashed bernys files but didn't help!
Cm10 is so nice!
PLZ help me!
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
This is being worked on. I have it too, the logs are already posted in the other thread. Be patient!
philivm said:
I'm coming Form 21e and flashed cm10 via cwm and everythimg works feine except Form im ei and little Problem... while listening Tod an sound i can't change loudness
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Sound problem and IMEI problem are being worked on.
Nanax said:
Before moving from lg to cm10, you did not downgrade to 21d or similar? This, atm, seems to fix problems like the imei not showing based on input from the other users. Give it a try, make sure you do all the wipes etc. and it should work, it does here.
Click to expand...
Click to collapse
For some people this works, for others it doesn't. I haven't tried myself, but Arcee said the baseband shouldn't matter. With that knowledge I'll be patient for a bit before I try this.
Thanks for using this thread!
True, but most succes stories i've seen have been on v21d or lower, so if he/she is dying to get it working, this might be worth the 20 min ey
Think this thread is a good idea. I'm afraid there could be the time when arcee get totally ****ed up about the "It's not working, what should I do" posts from 1000 users in the thread in which he just wanted error logs. So let's whine here: it's not working for me either lol
To let this be a little useful can you please always post the newest version and maybe changelog/bugfixes und probably working combinations in post 1? The link http://download.cyanogenmod.org/?type=nightly&device=p920 is useful as well there. This thread is btw kinda the same: http://forum.xda-developers.com/showthread.php?t=1540163
This graph thing is cool, maybe we should make something similar:
Did you flash ICS before? - Yes - Downgrade and replace the u-boot & loader - etc - etc
- No - Did wipes? (Try again) - Fixed permissions? - Did you try flashing a clean KDZ? (try again) - Did you search the thread? - Still no solution? Post a q!
------------
If i may add a question/suggestion:
With all the new nightlies comming out, what would be the best way to upgrade, is it ok to flash it over the old one for sure? Since i guess more people will want to upgrade it every once in a while we might also want to add that to the TS/FP?
Today i want downgrade form Xbsall 4.0.4 to install CM10.
So first i wipe my Rom, do a Factory Reset and flash the "BOOTV21E_AP" via Smartflash from the Resurrection Guide
I only do it with Smartflash because the Lg Flashtool no longer works for me....
Now I'm on Stock Gingerbread 2.3.5 but i can't root the phone via Megatrone....
I get an error that says "failed inufficented storage"
I have the same problem when i try to download something from the google playstore, in the store i get this error
"there is insufficient space on the device"
Anyone can help
Elil60 said:
Today i want downgrade form Xbsall 4.0.4 to install CM10.
So first i wipe my Rom, do a Factory Reset and flash the "BOOTV21E_AP" via Smartflash from the Resurrection Guide
I only do it with Smartflash because the Lg Flashtool no longer works for me....
Now I'm on Stock Gingerbread 2.3.5 but i can't root the phone via Megatrone....
I get an error that says "failed inufficented storage"
I have the same problem when i try to download something from the google playstore, in the store i get this error
"there is insufficient space on the device"
Anyone can help
Click to expand...
Click to collapse
Random attempt to be helpfull but: did you try formatting the internal storage? or a factory reset?
Nanax said:
Random attempt to be helpfull but: did you try formatting the internal storage? or a factory reset?
Click to expand...
Click to collapse
Before i downgrade i do a factory Reset and i erase the internal store in the System Settings from the Stock Rom.
But the phone says everytime "not enough space free, clean up your data and try it again"
Elil60 said:
Before i downgrade i do a factory Reset and i erase the internal store in the System Settings from the Stock Rom.
But the phone says everytime "not enough space free, clean up your data and try it again"
Click to expand...
Click to collapse
I always get this after restoring stock. The trick is to factory reset the device again after restoring stock Rom. Just restart into recovery (shutdown, hold volume down + 3D button, start phone) and do a factory reset.
Sent from my GT-N8013 using xda app-developers app
Elil60 said:
Before i downgrade i do a factory Reset and i erase the internal store in the System Settings from the Stock Rom.
But the phone says everytime "not enough space free, clean up your data and try it again"
Click to expand...
Click to collapse
See FP's reply, and while you are at it: http://forum.xda-developers.com/showthread.php?t=2037287
Just this part of the 5th step:
"
type fastboot flash u-boot u-boot.img
fastboot flash x-loader x-loader.img
..
fastboot reboot
"
This ensures some other remainders from your ICS flash are removed aswell (this is not directly related to your space problem, but does enhance the chance of runnig CM 10 in the end)
FPtje said:
I always get this after restoring stock. The trick is to factory reset the device again after restoring stock Rom. Just restart into recovery (shutdown, hold volume down + 3D button, start phone) and do a factory reset.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
I get to the Cwm but there i also get some errors
E:Can't open /cache/recovery/log
E:Cant't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I can't even reboot the system via CWM....
Nanax said:
See FP's reply, and while you are at it: http://forum.xda-developers.com/showthread.php?t=2037287
Just this part of the 5th step:
"
type fastboot flash u-boot u-boot.img
fastboot flash x-loader x-loader.img
..
fastboot reboot
"
This ensures some other remainders from your ICS flash are removed aswell (this is not directly related to your space problem, but does enhance the chance of runnig CM 10 in the end)
Click to expand...
Click to collapse
The Problem is i can't get into the fastboot mode, the computer don't show Omap up....
Nanax said:
With all the new nightlies comming out, what would be the best way to upgrade, is it ok to flash it over the old one for sure? Since i guess more people will want to upgrade it every once in a while we might also want to add that to the TS/FP?
Click to expand...
Click to collapse
If you already have cm installed, you won't need to factory reset again when you want to flash a new version.
The best way to update cyanogenmod is to go to settings, about phone, cyanogenmod updates. Set the update types to include nighties. The updater will do all the work for you.
Sent from my GT-N8013 using xda app-developers app
Elil60 said:
Today i want downgrade form Xbsall 4.0.4 to install CM10.
So first i wipe my Rom, do a Factory Reset and flash the "BOOTV21E_AP" via Smartflash from the Resurrection Guide
I only do it with Smartflash because the Lg Flashtool no longer works for me....
Now I'm on Stock Gingerbread 2.3.5 but i can't root the phone via Megatrone....
I get an error that says "failed inufficented storage"
I have the same problem when i try to download something from the google playstore, in the store i get this error
"there is insufficient space on the device"
Anyone can help
Click to expand...
Click to collapse
Your apps present? can you get into settings?
Nanax said:
This graph thing is cool, maybe we should make something similar:
Did you flash ICS before? - Yes - Downgrade and replace the u-boot & loader - etc - etc
- No - Did wipes? (Try again) - Fixed permissions? - Did you try flashing a clean KDZ? (try again) - Did you search the thread? - Still no solution? Post a q!
------------
If i may add a question/suggestion:
With all the new nightlies comming out, what would be the best way to upgrade, is it ok to flash it over the old one for sure? Since i guess more people will want to upgrade it every once in a while we might also want to add that to the TS/FP?
Click to expand...
Click to collapse
did this all came from v21e no imei no signal...
wiped all twice and nothing... what do you suggest to do?
pthacker85 said:
did this all came from v21e no imei no signal...
wiped all twice and nothing... what do you suggest to do?
Click to expand...
Click to collapse
Some people are reporting that V21e did not work for them myself included have you tried another baseband?
no. i don't know how to flash baseband...
[
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First port, but I don't have the device currently, so this is what I'm asking that is for only experienced flashers
I'd also ask for some help with issues, as it is my first time.
Instructions:
Download ROM:
My dev-host: http://d-h.st/users/pandasa123
From today onwards, I'll put ROMs there
10062013: https://docs.google.com/file/d/0B-qp6RUs8aJHSktvcTNrNVBNbzA/edit?usp=sharing
10072013: https://docs.google.com/file/d/0B-qp6RUs8aJHWTduZGRqa2VYVm8/edit?usp=sharing
10072013 v2 (fixed) : https://docs.google.com/file/d/0B-qp6RUs8aJHX2pDcnBVUjFTdEE/edit?usp=docslist_api
Download PA GAPPS: http://goo.im/devs/paranoidandroid/roms/gapps
MAKE A BACKUP!!!!!!!!
Full wipe if coming from another ROM
Flash ROM
Flash GAPPS
Reboot
?? Profit ??
Issues:
THANKS:
Paranoid Android
Cyanogenmod
AOKP
Google
THE JEWEL MAINTAINERS!!!! quite literally everything I did is thanks to them. go to their device and hit that thanks button in the PA 3.99 thread!!!! http://forum.xda-developers.com/showthread.php?t=2373565
Kernel is from the Jewel ROM, which i believe is CM sourced
Everyone who I am missing out, please tell me!
zip file is invalid. needs some work beyond my ability...
miffymiffy said:
zip file is invalid. needs some work beyond my ability...
Click to expand...
Click to collapse
+1, just says error flashing zip. TWRP 2.6.3.0
Sent from my HTC One XL using xda premium
looks like you need to move meta info and kernel to outside system folder. i might be wrong never ran PA before,but this zip looks odd. I dont see how it can install setup like this. It's not correct. im also not sure about the macosx folder being in the main position. will test and report
EDIT..... Op i got zip to install. if you like ill send you the corrected zip. first I do need someone to tell me about the macosx folder, nowhere do i see a script to call for it. updater is good binary is good. but no reference to that folder. anyone who has this already,follow instuctions on above post.
Th3ArchAngel said:
looks like you need to move meta info and kernel to outside system folder. i might be wrong never ran PA before,but this zip looks odd. I dont see how it can install setup like this. It's not correct. im also not sure about the macosx folder being in the main position. will test and report
EDIT..... Op i got zip to install. if you like ill send you the corrected zip. first I do need someone to tell me about the macosx folder, nowhere do i see a script to call for it. updater is good binary is good. but no reference to that folder. anyone who has this already,follow instuctions on above post.
Click to expand...
Click to collapse
Yeah I'll take another look. Can you send me the corrected zip. I'll look it over and later today, I'll give you guys another build. Sorry about that
I wish my phone was here...
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
pandasa123 said:
Yeah I'll take another look. Can you send me the corrected zip. I'll look it over and later today, I'll give you guys another build. Sorry about that
I wish my phone was here...
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
Click to expand...
Click to collapse
Will pm to you in a few.
Sent from my HTC One XL using Tapatalk 2
EDIT..PM sent
I'm sorry for hijacking, but shouldn't this post be on the other developers forum? This forum is for sense based roms
4ty-phive said:
I'm sorry for hijacking, but shouldn't this post be on the other developers forum? This forum is for sense based roms
Click to expand...
Click to collapse
I think you're getting the purpose of the sections confused.
The Original Android Development section is for ROMs that are built from source.
The Android Development section is for ROMs which are not built from source. It just happens that Sense ROMs fall into that category, but this section is not limited to Sense ROMs.
Sent from my Evita
Ok. Thanks for clearing that up. I just figured that being this is a PA Rom that it belonged in the other section.
4ty-phive said:
Ok. Thanks for clearing that up. I just figured that being this is a PA Rom that it belonged in the other section.
Click to expand...
Click to collapse
It is a fair enough assumption. This is a port so it technically isn't built from source, but in saying that we've had (and still have) ports in the Original Android Development section.
Sent from my Evita
New build which hopefully fixes the boot animation hang. I hope this boots successfully. Let me know. Logcats are helpful, even for a n00b like me
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
Scozzar said:
Is that v2 in the OP? Also, G Drive is telling me to request access.
Click to expand...
Click to collapse
Damn it. I'll have to fix that access restriction. Check back in an hour or so.
I don't have the device with me, so you guys will need to let me know any issues with logcats and we'll figure it out together
EDIT: Link in OP fixed. Hopefully this ROM works!
EDIT: My dev-host: http://d-h.st/users/pandasa123
I'll put everything there from now on
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
Did anybody tried flashing this rom is it booting up o not
Sent from my HTC One XL using xda premium
haq.adnan said:
Did anybody tried flashing this rom is it booting up o not
Click to expand...
Click to collapse
I still cant get it going. Just freezes after boot.
miffymiffy said:
I still cant get it going. Just freezes after boot.
Click to expand...
Click to collapse
I have a few people saying that. Do you have any logcats?
Running boot script...
/sbin/am: exec: line 6: app_process: not found
I:/sbin/postrecoveryboot.sh process ended with ERROR=2
Click to expand...
Click to collapse
That's the issue we're dealing with
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
pandasa123 said:
I have a few people saying that. Do you have any logcats?
That's the issue we're dealing with
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
Click to expand...
Click to collapse
I think whats happening is the shell script is broken somewhere. ill be looking for this error today (I think) the error might be caused because am script is missing( system/bin/sh ) or the script executable. I will report later after more investigation. Ill be going to warrenty center today to replace phone,so i should be back up to test today. You might also wanna look in ram disk to see if its missing the sbin part. dont see why it would though.
Th3ArchAngel said:
I think whats happening is the shell script is broken somewhere. ill be looking for this error today (I think) the error might be caused because am script is missing( system/bin/sh ) or the script executable. I will report later after more investigation. Ill be going to warrenty center today to replace phone,so i should be back up to test today. You might also wanna look in ram disk to see if its missing the sbin part. dont see why it would though.
Click to expand...
Click to collapse
I'll look once I get back from school today.
EDIT: I made a patch that addresses the app_processes and maybe we'll be able to boot
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
New build. Can someone test it for me?
https://docs.google.com/file/d/0B-qp6RUs8aJHZVBWMnBmbGQyYVU/edit?usp=sharing
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
pandasa123 said:
New build. Can someone test it for me?
https://docs.google.com/file/d/0B-qp6RUs8aJHZVBWMnBmbGQyYVU/edit?usp=sharing
S-OFF
Boot Unlock (TAKE THAT AT&T!)
TWRP 2.6.3.0
Running something that'll probably change in a few days
Click to expand...
Click to collapse
Downloading now
Sent from my HTC One XL using xda app-developers app
I have this phone which has the GB obtained from Samsung web site. I then rooted with J Scott option 2. Since then I dont have messaging. What can I do to get this back? I have an app that I use but not really satisfied with that. Can I go back to Aroyo, or try to download GB again. I tried Kies again, but it doesn;t give me any option to download again. I have read hundreds of pages w/o an answer, followed many links only to have spam loaded to my computer. Thanks for any help.
[email protected] said:
I have this phone which has the GB obtained from Samsung web site. I then rooted with J Scott option 2. Since then I dont have messaging. What can I do to get this back? I have an app that I use but not really satisfied with that. Can I go back to Aroyo, or try to download GB again. I tried Kies again, but it doesn;t give me any option to download again. I have read hundreds of pages w/o an answer, followed many links only to have spam loaded to my computer. Thanks for any help.
Click to expand...
Click to collapse
Get goo app then install cwm or twrp recovery from that. Then download a rom and flash it. First flash an ICS ROM then a JB ROM in that order
Sent from my SAMSUNG-SGH-I317 using Tapatalk
eZdubzitmk4 said:
Get goo app then install cwm or twrp recovery from that. Then download a rom and flash it. First flash an ICS ROM then a JB ROM in that order
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
This is all new to me, but I'll give it a try. I dont see cwm or twrp on Goo? Can you recommend ICS and JB ROM I dont want anything fancy, just a working phone, but then I might want to get fancy. Thanks for your reply.
[email protected] said:
This is all new to me, but I'll give it a try. I dont see cwm or twrp on Goo? Can you recommend ICS and JB ROM I dont want anything fancy, just a working phone, but then I might want to get fancy. Thanks for your reply.
Click to expand...
Click to collapse
Can anyone help with this please? Thanks
[email protected] said:
Can anyone help with this please? Thanks
Click to expand...
Click to collapse
You can go back to Froyo using GTG's Unbrick. Link in my sig. And then you can get Gingerbread here. I recommend option C. If you prefer Heimdall to Odin, there are links to those packages in the ISET thread.
Thank you. I'll let you know what happens.
[email protected] said:
Thank you. I'll let you know what happens.
Click to expand...
Click to collapse
I did the unbrick and messaging appears to be working. SU icon is in the apps but I don't think it is working. I tested with root test from apps store and it said it was rooted. What should I do next? Do I still need to do the second thing suggested above? Thanks again
[email protected] said:
I did the unbrick and messaging appears to be working. SU icon is in the apps but I don't think it is working. I tested with root test from apps store and it said it was rooted. What should I do next? Do I still need to do the second thing suggested above? Thanks again
Click to expand...
Click to collapse
If you're on Froyo and root was successful, then you can stay there. Do the second step if you want to move up to Gingerbread.
jkakkanad said:
If you're on Froyo and root was successful, then you can stay there. Do the second step if you want to move up to Gingerbread.
Click to expand...
Click to collapse
No, I'm still on GB, root is not working to remove the AT&T bloat, and I would like to move up to JB if possible?
[email protected] said:
No, I'm still on GB, root is not working to remove the AT&T bloat, and I would like to move up to JB if possible?
Click to expand...
Click to collapse
Follow the instructions in this thread to move up to ICS or JB. Some of the ICS roms and all JB roms (I think) use the MTD file system so make sure you backup your EFS before making the move upward. There are instructions in the linked thread for making an EFS backup. Make sure to read carefully before you attempt anything.
Of course, the first step is to see if you have a custom recovery. It will be your launch pad to sweeter future.
jkakkanad said:
Follow the instructions in this thread to move up to ICS or JB. Some of the ICS roms and all JB roms (I think) use the MTD file system so make sure you backup your EFS before making the move upward. There are instructions in the linked thread for making an EFS backup. Make sure to read carefully before you attempt anything.
Of course, the first step is to see if you have a custom recovery. It will be your launch pad to sweeter future.
Click to expand...
Click to collapse
How do I find if I have custom recovery?
[email protected] said:
How do I find if I have custom recovery?
Click to expand...
Click to collapse
Power down the phone. Then hold Vol+, Vol-, and the Power button when you turn it back on. Once white SAMSUNG comes up, release the power button. This will take you into recovery. At the top, it will tell you which recovery you have: Android 3e (secure) or red CWM (custom).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----edit----
If you still have stock recovery, then following the link in post #5 and use Odin to flash option C. This will give you GB with root, red CWM, and AT&T bloatware removed.
jkakkanad said:
Power down the phone. Then hold Vol+, Vol-, and the Power button when you turn it back on. Once white SAMSUNG comes up, release the power button. This will take you into recovery. At the top, it will tell you which recovery you have: Android 3e (secure) or red CWM (custom).
----edit----
If you still have stock recovery, then following the link in post #5 and use Odin to flash option C. This will give you GB with root, red CWM, and AT&T bloatware removed.
Click to expand...
Click to collapse
Nothing comes up, it goes on to load the AT&T rethink possible. So I dont have stock recovery?
[email protected] said:
Nothing comes up, it goes on to load the AT&T rethink possible. So I dont have stock recovery?
Click to expand...
Click to collapse
My instructions were a little unclear the first time around. Try again with the instructions below.
1) Power down the phone
2) Hold Vol+, Vol-, and Power
3) When the white SAMSUNG logo comes up, let go of the Power button only. Continue to hold down Vol+ and Vol-.
This should get you into recovery.
jkakkanad said:
My instructions were a little unclear the first time around. Try again with the instructions below.
1) Power down the phone
2) Hold Vol+, Vol-, and Power
3) When the white SAMSUNG logo comes up, let go of the Power button only. Continue to hold down Vol+ and Vol-.
This should get you into recovery.
Click to expand...
Click to collapse
No your instructions were clear to me. I did it again, same result. Thank you for your time.
[email protected] said:
No your instructions were clear to me. I did it again, same result. Thank you for your time.
Click to expand...
Click to collapse
No problem. I'm not sure why the phone won't boot into recovery. I can only speculate but I'm sure there's someone who can shed some light on the issue. If this was my phone, I would flash the UCBL3 Unbrick in Odin b/c it'll re-establish the original partitions, give you GB and root at the cost of losing all the info on your phone. Then you can use flash a custom kernel to get red CWM. From there, you can move on to ICS or JB. Let me know how things turn out.
jkakkanad said:
No problem. I'm not sure why the phone won't boot into recovery. I can only speculate but I'm sure there's someone who can shed some light on the issue. If this was my phone, I would flash the UCBL3 Unbrick in Odin b/c it'll re-establish the original partitions, give you GB and root at the cost of losing all the info on your phone. Then you can use flash a custom kernel to get red CWM. From there, you can move on to ICS or JB. Let me know how things turn out.
Click to expand...
Click to collapse
The last thing I did was the UCBL3 unbrick in Odin, so should I do it again or flash the custom kernel to get red CWM? Thanks
[email protected] said:
The last thing I did was the UCBL3 unbrick in Odin, so should I do it again or flash the custom kernel to get red CWM? Thanks
Click to expand...
Click to collapse
Flash a custom kernel
jkakkanad said:
Flash a custom kernel
Click to expand...
Click to collapse
I bet you knew I was going to say this ....... How do I do that? Thanks
I really do think these videos should be sticky'd in the forums
Simple search on Youtube ''How to root the samsung infuse 4g''
This video showing how to upgrade to stock 2.3.6 rooted with a custom recovery
This video showing how to upgrade from 2.3.6 to 4.0.4
This video showing how to upgrade from 4.0.4 to 4.1 and up
There is also this Super Everything thread from a while ago with links to everything needed to root and install recoveries with instructions. I highly recommend reading ALL OF IT before proceeding as it answers almost any question you could have and then some