Database Info

[ROM][09/05/12] CyanogenMod-7.2 RC2 for Desire GSM

CyanogenMod is a free, community built distribution of Android 2.3.7 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Click to expand...
Click to collapse
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance (how-to).
INSTRUCTIONS:
- First time flashing CM 7 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery (Unrevoked method is recommended).
2. Do a Nandroid backup!
3. WIPE (wipe data/factor reset + wipe cache partition)
5. Install the ROM
6. Optionally install the Google Addon
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Go into recovery and dump the "/proc/last_kmsg" file.
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get send the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
This is the latest release candidate so any and all feedback is appreciated!
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Latest version: 7.2.0-bravo - 09/05/2012
Download: CyanogenMod Mirror Network
Google Addon: Get gapps-gb-*latest*.zip
Download: http://goo-inside.me/google-apps/
CM7 HBOOT r2 by Alpharev | xda thread
Change partition table size 145/5/287 (system/cache/size)
Upgrade instruction:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl-cm7r2.img'
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything, advanced restore system & data, install CM7 again (same version or a newer one).
Legacy App2SD:
Simple2Ext (Easy with a GUI)
CM7 Legacy App2SD Addon Script (For Advanced user, Command Line)
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
*Note: I'm not part of the CM Development team, however after waiting for ages for someone who was to post a thread for RC2 it didnt happen, due to this ive taken it upon myself to start one so people dont mistakenly think RC1 was the latest release, I hope no one minds me kicking a thread off.

Reserved for future use

More CyanogenMod ?
Sorry Bro...
what is "new" or "future" or....2 outer CyanogenMod-7.2 RC2 ?
See Kali
NIGHTLY
and more...?!

There is no point in creating another CM thread..

I don't see why this thread is necessary, there are several CM7r2 threads already... please PM with an explanation me if you'd like it reopened.

[NIGHTLY][ROM][4.1.2] CyanogenMod 10 for Acer A700

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
WARNING: I've bricked my tablet into APX mode around the 10th time of flashing this ROM (recovery froze and it rebooted into APX). The new (Update 1) recovery should be safer than the old one, but flash at your own risk!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Device-specific source code for the Acer A700 are available from https://github.com/CyanogenMod/android_device_acer_a700 and https://github.com/CyanogenMod/android_kernel_acer_t30
Do not submit bug on CyanogenMod issue tracker
Downloads
Latest Nightly: http://get.cm/?device=a700
Google Apps: http://goo.im/gapps
Installation
Install CWM recovery from http://forum.xda-developers.com/showthread.php?t=1791165 (note that the old touch version will not work because of incorrect default.prop from CWM builder)
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Wipe data if coming from stock
Changelog
A rough changelog is (will be) available here:
http://changelog.bbqdroid.org/#/cm10/a700 or http://cm10log.appspot.com/?device=a700
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Older pre-nightly Download
See this post.
Note to Official JB Users
Jelly Bean bootloader is only supported on 201212023-EXEPRIMENTAL and later NIGHTLIES.

Awesome!
will flash it later when back from work and provide feedback (too annoyed with the stock rom atm) so i will give it a go!
cheers

Awesome! Pace is speeding up. Thanks for your efforts.
pawitp said:
...
[*]Install CWM recovery from http://www.mediafire.com/?9usi98fs7jpdf7w (the touch version in the other thread will not work because of incorrect default.prop from CWM builder)
...
Click to expand...
Click to collapse
The CWM is not the one from the "CWM Recovery 6.0.1.0 for A700" thread, right?
Cheers
Peter

aticatac said:
Awesome! Pace is speeding up. Thanks for your efforts.
The CWM is not the one from the "CWM Recovery 6.0.1.0 for A700" thread, right?
Cheers
Peter
Click to expand...
Click to collapse
No, read inside the brackets
The "CWM Recovery 6.0.1.0 for A700" has broken build prop and will cause the device check to fail.

pawitp said:
No, read inside the brackets
The "CWM Recovery 6.0.1.0 for A700" has broken build prop and will cause the device check to fail.
Click to expand...
Click to collapse
Actually, I did read inside the brackets, but the CWM in the mentioned thread is not a touch version, or so I thought, that's why I asked.
EDIT: Now I realised that we were talking about the exact same thread title.
Anyways, I will flash this one, give it a whirl and read twice or more next time.
Jeez, where is my mind...
Thanks again.

Does the CM10 include the performance update?

does anyone else get e:Can't mount /sdcard/ ?
cwm tells me can't mount sdcard and emmc but data, cache and system mount fine (backup even stores on the sdcard under cwm folder)

Can you give us the MD5 CWM recovery ? Thx

ups forgot the most important screen
just redid it same error
PS:
(used your recovery.img as stated above)

Buster99 said:
ups forgot the most important screen
just redid it same error
PS:
(used your recovery.img as stated above)
Click to expand...
Click to collapse
dou you have an external sd card?

looking forward for cm on the a511. have fun with your a700
Sent from my A511 using XDA Premium HD app

What size should do the Nandroid Backup ? Mine do 15Mo !

Blindie said:
dou you have an external sd card?
Click to expand...
Click to collapse
yes but took it out prior flashing the recovery.img so atm no - no 2nd sdcard

Does it wipe the internal storage ?

imtheyoyo said:
What size should do the Nandroid Backup ? Mine do 15Mo !
Click to expand...
Click to collapse
mine is 165mb
aibo said:
Does it wipe the internal storage ?
Click to expand...
Click to collapse
should not since after successfull install you wipe cahce and dalvik not sd
i just reflashed the recovery - still no joy

Very nice ! Tanks a lot !
But no sound for me ...
Have you got sound ?

enico64 said:
Very nice ! Tanks a lot !
But no sound for me ...
Have you got sound ?
Click to expand...
Click to collapse
I have sound.

So far so good, thank you.
I do enjoy the lack of bloat.....

aibo said:
Does it wipe the internal storage ?
Click to expand...
Click to collapse
The installer doesn't, but you'll need to wipe data for it to boot successfully. Wiping data won't wipe your internal sdcard though.

I'm getting the triangle of death after flashing the recovery in the OP...
I had the other CWM you posted in the other thread which the tablet seemed to boot into just fine.
i'm running a a700 with the a701 rom from way back, is that my issue?

[ROM][2.3.7][DEV] Cyanogenmod 7/Clockworkmod for Coby Kyros MID7012/MID7016/MID7015

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (GB), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available for these devices at Androtab.info. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATIONS
YOU MUST READ CAREFULLY THIS PAGE!
DO NOT USE IF YOUR TABLET IS NOT LISTED BELOW. IT WILL BRICK YOUR TABLET!
DO NOT USE FwTool APP. IT WILL BRICK TOUCHSCREEN!
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
Discussion for development
http://forum.xda-developers.com/showthread.php?t=1101094
What is working:
accelerometer
audio
gapps
internal NAND flash
SD card
touchscreen with calibration app
USB host/device
wlan
What is not working:
3G
bluetooth
camera
hardware accelerated video
GPS
HDMI
many things which you expect to work
How to make backup of stock recovery:
Download dump-recovery-signed.zip
Rename to "update.zip" and put it on root of SD card (e.g. /sdcard/update.zip)
Install update.zip from stock recovery (e.g. select "apply update.zip from sdcard")
Stock recovery will be dumped as dumped_recovery.img and /proc/mtd will be copied as dumped_proc_mtd.txt on root of SD card. keep them in safe place.
How to install ClockworkMod Recovery 5:
Make backup of stock recovery (see up)
Download recovery.zip
Rename to update.zip and put it on the root of SD card, replacing the other one (e.g. /sdcard/update.zip)
Install update.zip from stock recovery (e.g. select "apply update.zip from sdcard")
Clockworkmod will be booted on next reboot recovery.
How to use Clockworkmod Recovery 5:
Menu Button/Volume DOWN Button = next(down)
Search Button/Volume UP Button = prev(up)
Home Button/Power Button = select
Back Button = back
How to install CyanogenMod 7
Install ClockworkMod Recovery 5 (see up)
Reboot recovery
Make backup of stock ROM
Wipe data/factory reset *4
Install cyanogen.zip
Reboot
Do the touchscreen calibration
Latest Images for Coby Kyros 7012/7016/7015
COBY Kyros MID7015 GB ROM:
ClockworkMod Recovery 5 - CyanogenMod 7
COBY Kyros MID7016/MID7012 GB ROM:
ClockworkMod Recovery 5 - CyanogenMod 7

Thanks for this! Are you still possibly working on it?

manaox2 said:
Thanks for this! Are you still possibly working on it?
Click to expand...
Click to collapse
No, this project has been dead since 2012 - He was just sharing it

Sorry about the unawareness.. Do I have to root first? Or I can just flash cwm and ROM and get root too just like that? TIA.
Sent from my Amazon Otter2 using XDA Premium 4 mobile app

nice, im trying it now

[ROM][UNOFFICIAL][W.I.P][TESTING] CM11 Memopad FHD10 4G - ME302KL

CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL ​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
USB Pendrive
Deep Sleep
Front Camera (With othen camera apps, like "Open Camera" form play store.
and other things...
Bugs
Back Camera does not work...
-----------------------------------------------------------------------------------------------------------------------------------------------------------​
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://www103.zippyshare.com/v/xRRsoYKi/file.html UPDATED 28-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Beta1, Stable

yattodettaman said:
CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL ​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
and other things...
Bugs
Camera
others ?...
-----------------------------------------------------------------------------------------------------------------------------------------------------------​
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://d-h.st/PUF4 UPDATED 19-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Testing,
Click to expand...
Click to collapse
UP

yattodettaman said:
UP
Click to expand...
Click to collapse
Going to try it out thank you!!!

yattodettaman said:
UP
Click to expand...
Click to collapse
This is great , do not stop ! We need a stable 4.4

New Boot.img !
Fixed Deep Sleep bug, Front Camera and a lot of little fixes...
Link to download new boot.img : http://www103.zippyshare.com/v/xRRsoYKi/file.html you have to flash with TWRP recovery.
I installed Open Gapps 4.4.4, and the rom is very usable.
Have a nice day !

Hi!
I flashed rom. The end of the setup wizard fc aosp keyboard. Very hard situation, I did not create google account. I copied from phone Swiftkey app, then was good.
SD card not mounted, can not be used. There is a solution?
Thank you for your work!
(I'm sorry my English is very bad)

Very Strange. ..
I have no Fc. Internal sdcard Works.
You are right. External sdcard does not work.
Use the Last Boot.img.
I flashed open GApps 444 stock too.
Tab works Very fine.
Lilliput works Very fine too. ?

Another problem: baseband unknow. I flashed new boot img

mmarta said:
Another problem: baseband unknow. I flashed new boot img
Click to expand...
Click to collapse
It isn't a nexus7. Baseband is unknown because it is a Duma. What is the issue that baseband Can make?

My tablet ME302KL, not Nexus7.Wifi connect to router, but not mobilnet. Dirty flash: rom, open gapps, new boot img = baseband unknow.

Mobile network works fine. 3g and 4G.

Solved Baseband unknow, but 3G and 4G work fine over wifi.

ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772

4.4
yattodettaman said:
ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772
Click to expand...
Click to collapse
Please, give link on android 4.4.ONLY me302kl

[MOD][Arm]MultiROM for Galaxy Core [v3.0.28][Beta 1]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation​
Before doing anything let me tell you your main rom should be LineageOs 13
1) first download recovery , kernel and multi rom patch
2) flash recovery zip file using your recovery ( name : - multirom-20160929-3.0.28-UNOFFICIAL-arubaslim.zip don't do any mistake )
3) after flashing recovery flash kernel (name :- kernel-20170218-3.4.0-UNOFFICIAL-arubaslim.zip)
4) then reboot recovery
5) after rebooting you should see new recovery then flash multi rom patch zip from recovery (name :- multirom-20160929-v33-UNOFFICIAL-arubaslim.zip) click inject bootimage and reboot recovery again
6) click add roms then add zip file and flash !
7) after flashing reboot system and enjoy
You can manage your roms using this app https://www.androidfilehost.com/?fid=673368273298932194
*FAQ'S*
​
Q1) What's Multi rom manager ?
A) it's used to boot 2 or more roms in your device for example windows 7 + windows 10 in your pc
Q2) flashing new rom will erase my data ?
A ) we use your internal or external sdcard as new partition for booting roms so no your data will not erased
XDA:DevDB Information
[MOD][Arm]MultiROM for Galaxy Core [v3.0.28][Beta 1], Multi Rom manager for the Samsung Galaxy Core
Contributors
androidlover5842
Source Code: https://github.com/I8552-CM/multirom_device_arubaslim
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2017-02-17
Created 2017-02-17
Last Updated 2017-02-17

Hi bro excellent work! Its compatible with i8260 to? And on the first line where it says "Before doing anything let me tell you your main rom should be los13" you refer to CM13? Or which rom?
EDIT: I already understood that you were referring to LineageOs. You could write it as LOs or the full name to avoid confusion, just a tip. Thanks!

Works perfectly, thanks!

Bro,whats the bugs?

techusthad said:
Bro,whats the bugs?
Click to expand...
Click to collapse
Does not have any bugs bro

My doubt is we have only internal storage of 4GB.So will be apps same in two roms?

Is there any way to remove this recovery with boot injector?

can you please make it one for galaxy core 2 please

I have an error in the apk ...it shows me "MultiROM recovery is not installed.Failed to download info about updates!" ,despite the fact that i've done everything and i can boot normally recovery and primary rom (linage 13) through the boot menu of the mod. Also i can't boot the secondary rom i installed (cm 11 4.4) it is stuck before loading the rom but i don't know if it has something to do with it.Should i do everything all over again?

Bro you said you ganna make a latest dualboot patcher for galaxy core 2.... Why didn't you responding on telegram

????? awesome for me
Tnx
A.L

Is this compatible with samsung galaxy core prime (sm-g360h)