Just got a HTC One SV this afternoon for the missus. (I am a Note 2 owner) and part of the deal to get her away from wanting an iPhone 5 was to convince her Android was the way to go. Of all the phones she looked at, she chose the HTC One SV because of its size ...
Brought it home with the promise I would set it up like my phone for her and all would be good.
Proceeded to follow instructions found in the HTC One SV section of these forums on unlocking the bootloader and so forth.
What a complete and utter nightmare HTC put their customers through for a simple unlock! Went to their site, followed the instructions, joined, emailed, got my "token" <-- what a joke! and proceeded with the next set of instructions which was to place a TWRP img on the phone.
Next thing I know windows pops up and says Device driver was not successfully installed. ? MTP USB Device ...
This I dont get at all. When I first plugged the phone into the PC the forst thing Windows did was install the drivers. The phone popped up in windows and I could access the internal storage.
I've installed HTC Driver & SyncManager but still whenever the phone is plugged in I get the MTP error and no phone in windows. So how am I to finish setting up this phone now?
The only reason for this post is I am exhausted, I've been searching these forums and the net for an answer, and I'm completely at my wits end.
I have an unlocked HTC One SV which may as well be bricked if I can't access it via PC. Maybe I should of let her have that damn iPhone 5 after all ...
Massive props to Seanie280672 who helped me get a recovery.img onto the phone. Phew!
Missus won't be giving me any grief over not getting an iPhone 5
That said, even though I managed to somehow connect the phone to the PC, it is still not coming up in windows explorer, and upon connection of the phone (USB) to the PC, windows always throws up the message that the drivers are not installed?
Check device manager and there's the dreaded little yellow astrix next to the mobile device. Somethings amiss here ...
Thx for the help, muchly appreciated. :good:
Since JB all HTC devices are recognized on PC as MTP device. Previous used UMS was kicked out.
Install the latest version of htc driver
I'm in Australia so I got the drivers from HTC.au site:
http://www.htc.com/au/support/news.aspx?p_id=537&p_name=htc-one-sv
The driver file is called setup_2.1.55.0_htc
Is this the latest or is there a different driver I should be using?
Burginthorn said:
I'm in Australia so I got the drivers from HTC.au site:
http://www.htc.com/au/support/news.aspx?p_id=537&p_name=htc-one-sv
The driver file is called setup_2.1.55.0_htc
Is this the latest or is there a different driver I should be using?
Click to expand...
Click to collapse
have u tried to enable usb debugging? Go to settings > developer options
If your driver is including HTC Sync, you should be fine.
You can uninstall Sync afterwards, driver for the phone will still remain.
Strangely deleting Sync did the trick. Plug in the phone and no pop ups saying drivers are not installed. Phone is now showing up in My Computer.
Yup, not the first time, Sync makes the problem.
Related
(I posted this in the guide to installing s-off etc etc but yeah I don't know if anyone's going to pay it any mind there :S If I was wrong to create this, I'm sorry ><)
Hi,
I keep getting a Communication interrupted error. I don't know if anyone else had this problem and can help me? I'm a n00b with this s-off thing and I triple checked with like 4 different websites to make sure I'm going the right way with this.
Doing this on Windows, I got the HTC driver, removed anything that would sync the phone to the computer, everything going well up until this point:
Zerging Root... this may take a minute or so..
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
Whien life gives you lemons, don't make lemonade. Make life take back the lemons
Waiting for fastboot...
Rebooting to fastboot (again)...
Communications with phone unexpectedly interrupted. Try Again.
Press (almost) any key to exit.
What's wrong with it?
also:
I put on the USB Debugging, I turned off Fastboot, and yes, I checked - it is still S-ON *sad*
HTC Sensation 4G (pyramid-1.17.0008, Android: 2.3.3, ROM version: 1.29.531.2)
I have tried with the fastboot on as well
As for these troubleshooting methods, I've been through it over and over:
Revolutionary Hanging on "Method 3"
1. Make sure you have installed all the drivers from above.
2. Please Make Sure you have HTC Sync uninstalled and Droid Explorer uninstalled.
3. Install These Drivers HERE:
4. Basically anything and everything that will allow your phone or other phones to automatically connect or sync to your computer has to be uninstalled
5. Try another Computer or Factory Reset your device as a last resort.
I've tried 3 different computers (I have no access to anyone who has a Linux computer) I've factory resetted my phone twice + my SD card. I really don't know what else to do
I've tried it in Charge Mode, and HTC sync mode as well.
Can anyone help me? :S
you have to do it in charge mode, make sure fast boot is off, and here is the tricky part, ANY app that could sync with the fone, needs to be uninstalled.
for me Zune kept messing with the install cuz it kept trying to sync...
Also, make sure your HBOOT is compatible with the version of revo you are using
so try this:
1) uninstall itunes (and other apple device software), zune, and any htc software (plus the stock drivers)
2) reboot
3) clean the registry (regclean or something similar)
4) reboot
5) reinstall stock drivers then plug in the phone (charge only) and let the pc detect the hardware.
6) unplug the fone and reboot the pc
7) NOW try to S-OFF, should work, this is the process i had to take
Thanks, i tried everything you told me and it still won't work. I'm running out of ideas. Isn't there another method I could go through so I can just flash a custom rom. Lol...
if its unbranded, you can try the HTC method, but im not a fan of their approach to it...revo is much more user friendly in the long run...
also have you tried disconnecting all usb devices other than the keyboard, mouse and phone? also try doing a battery pull and leave it out for 10-15 seconds, and give it another shot
also, what ver of revo u using? the latest? and whats your hboot?
EDIT nm, saw your hboot etc in your first post long night at work
also, this may be a super stab in the dark, try another cable if you have one, just try to eliminate any possible issue
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
DJW6927 said:
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
Click to expand...
Click to collapse
yeah, apparently win7 is giving different users this problem, i used WinXP SP2 32bit with no issues
Yup. Definitely related to Win7 64 bit version for me. Although the user didn't report what version they were using.
It's also worth remembering that all USB ports aren't all the same.
I have to use the ports on the front of this particular 32 bit XP workstation for some operations and the ports on the back for other. Magldr for my HD2 never works on the front.....
Like Rev say in their FAQ... there's something about the USB stack on windows that sucks. Not surprising really when we're talking about interop between such dissimilar operating systems (Android vs MS Win). Its gonna be a headache sometimes.
I'm on Win 7 32 bit, when I tested Revolutionary my device wasn't detected at all.
Rebooted many times, installed drivers and did lots of things and still nothing.
I changed USB port, and it worked xD
Try different USB ports and another USB Cable in-case
Gd luck
Edit: Just found out that you tried 3 different computers... Sorry then, if I come up with anything I'll tell you
Edit 2: Can't he try it on Safe Mode? Maybe it would help?
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Solidus_n313 said:
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Click to expand...
Click to collapse
Wow
Way to go Microsoft xD
I'm having the exact same problem as with the poster of this thread. I've tried a fresh install of xp sp3 via vmware on my macbook pro. I've also installed Ubuntu but can't even get the revolutionary.exe file to open. Linux is too foreign for me, can anyone help me with that?
I had to use HTC sync mode in order for it to work on Windows 7 64 bit.
Sent from my HTC Sensation 4G using Tapatalk
Run it 3 times, each step completes as normal and it'll say it's done
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Sent from my HTC Sensation Z710e using XDA Premium App
lalitsehgal21 said:
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Click to expand...
Click to collapse
listen to this, his situation was WAYYYYY worst than yours, and he got his fone working perfectly and S-OFF'd
By flashing, I assume you do mean using the revolutionary program? I will try this process a little later and will post results. Thank you
i also had this problem when i wanted to set my sensa s-off. i run the tool several times and i always got this error message. So then i plugged of the phone, plugged it on again and then the tool says my phone is already s-off.
i boot the phone into bootloader and yes, the phone was s-off, on top is the revolutionary text and the bootloader version is 1.17.1111
I am coming from the Galaxy S Vibrant and so far I am not impressed by the whole rooting process for the Skyrocket. I have tried on 3 different windows computers and every time it says it is unable to recognize device. I installed the drivers but I don't believe they were installed correctly. When I click root in super one click, the application stops responding.
I made sure to select debugging and when I connect the phone to the computer nothing prompts me on the phone. Is there something I am missing in order to get the Skyrocket recognized by Windows?
eshewski said:
I am coming from the Galaxy S Vibrant and so far I am not impressed by the whole rooting process for the Skyrocket. I have tried on 3 different windows computers and every time it says it is unable to recognize device. I installed the drivers but I don't believe they were installed correctly. When I click root in super one click, the application stops responding.
I made sure to select debugging and when I connect the phone to the computer nothing prompts me on the phone. Is there something I am missing in order to get the Skyrocket recognized by Windows?
Click to expand...
Click to collapse
You need to be patient. the program stopped responding for nearly 5 minutes for me before it started going again and my PC is lightning fast.
Try installing Samsung kies. Should give you all the drivers you need.
If your computer doesn't recognize the phone at all then you most likely dont have the drivers installed correctly or a USB hub driver issue in which case no USB devices would work. Like I said, try installing kies. Once you can get the PC to recognize the phone as a storage device, you should be good to run the root program.
Sent from my SAMSUNG-SGH-I727 using XDA App
I tried Kies already and it didn't help. I can connect my Vibrant with no problem to my computer as well.
eshewski said:
I tried Kies already and it didn't help. I can connect my Vibrant with no problem to my computer as well.
Click to expand...
Click to collapse
Can you connect other USB devices to your computer? USB drives etc
Sent from my SAMSUNG-SGH-I727 using XDA App
i had somewhat the same problem , I rooted my old vibrant first incase i screwed something up , no big loss , it went smooth as butter , then I hooked the SR up and it took forever , 3 try I unplugged alot of my other usb devices , restarted the pc and tried , it hung for a few minutes and I left it alone , it eventually worked the last time. I also have a pretty solid pc , running win7 64bit , unplugging alot of my usb devices seemed to be the thing that really helped.
hope that helps ya
eshewski said:
I am coming from the Galaxy S Vibrant and so far I am not impressed by the whole rooting process for the Skyrocket. I have tried on 3 different windows computers and every time it says it is unable to recognize device. I installed the drivers but I don't believe they were installed correctly. When I click root in super one click, the application stops responding.
I made sure to select debugging and when I connect the phone to the computer nothing prompts me on the phone. Is there something I am missing in order to get the Skyrocket recognized by Windows?
Click to expand...
Click to collapse
rooting this device is easier then posting that on the forum =)
1) If you are still 2.3.5 (and didn't do the OTA upgrade) -> use doomlord's script (DooMLoRD_v3_ROOT-zergRush-busybox-su) or newer if there is one:
-if you did do the OTA upgrade - search the forum for another way to root.
2) install KIES (if its installed, continue to 3)
3) extract the DooMLoRD_v3_ROOT-zergRush-busybox-su.zip to anywhere (maybe c:\doom )
4) open a command prompt (run as administrator if your not running windows XP)
5) goto c:\doom\files\
6) type "adb devices"
- if it finds your device - just run the script , it will root your phone
- if it does NOT find your device, troubleshot kies (uninstall it, reboot, reinstall, disable anti virus/firewall, etc etc) because if it can't find the device then the problem is someplace on your computer.
good luck!
Hi, all
I got a new inspire 4g last week. It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not detect the phone as a device. I have tried all the suggestion on xda but no luck.
Please help me to solve this issue. I have seen a lot of thread discussing this issue on HTC Desire. They all suggest to format mtd0 in fastboot mode .But during fastboot mode also my phone is not detected by PC (tried both on linux and win7. Other phones are working on the same pc) , So I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
EDIT:
I have full access to recovery. Currenlty Clockwork mod 5.0.2 is installed . I can install custom rom without any problem.
musarraf172 said:
Hi, all
I got a new inspire 4g last week. It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not detect the phone as a device. I have tried all the suggestion on xda but no luck.
Please help me to solve this issue. I have seen a lot of thread discussing this issue on HTC Desire. They all suggest to format mtd0 in fastboot mode .But during fastboot mode also my phone is not detected by PC (tried both on linux and win7. Other phones are working on the same pc) , So I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
EDIT:
I have full access to recovery. Currenlty Clockwork mod 5.0.2 is installed . I can install custom rom without any problem.
Click to expand...
Click to collapse
Have you tried to remove and then reinstall the android driver?
zelendel said:
Have you tried to remove and then reinstall the android driver?
Click to expand...
Click to collapse
Thanks for your reply. But there is no issue with driver because my phone does not detect the usb connection as well as the pc also does not detect the phone as a device ( in device manager in windows or in demesg in linux).
Please help..
Edit:
Today I have tested with another Inspire 4g (My friend is having one inspire 4g) with my pc. It is detected by my pc ( both in linux and windows). Fastboot as well as adb worked like charm. But my inspire is not detected by the same PC..
I have the same problem with my Inspire and yet to find the answer. Have tried everything i could find on the internet except a factory reset. If i cant fix it, will trade off for a Galaxy sii i guess.
I had the same issue a while back. Believe it or not, the USB cable just up and flaked out on me. I bought a new cable and it worked fine afterwards. Of course that was my last thing to check, but I had the cable for about 6 months. I travel a lot, so I think wear and tear got the best of it. It's worth checking...
swap usb cables, also canned air to the usb port on the phone wouldnt hurt
This just happened to my inspire as well. Charge is OK, but no more Mass Storage connection. I have tried on multiple computers and multiple cables. I even reset the phone back to stock and it still didn't work. Oh well. I have a Vivid on the way.
trahajopro86 said:
This just happened to my inspire as well. Charge is OK, but no more Mass Storage connection. I have tried on multiple computers and multiple cables. I even reset the phone back to stock and it still didn't work. Oh well. I have a Vivid on the way.
Click to expand...
Click to collapse
Hei, I returned my inspire and got a sensation...
Inspire 4g not connecting to usb
I just got my Inspire 4G from AT&T... and guess what... no data connection at all. I tried everithing! nothing... so I just bought a new micro usb data cable!!! and voila!! everithing is going perfect... now i´m able to connect!!!
AT&T ships a only-to-charge cable... so get rid of it !!! that´s it.
Bye.
valdart said:
I just got my Inspire 4G from AT&T... and guess what... no data connection at all. I tried everithing! nothing... so I just bought a new micro usb data cable!!! and voila!! everithing is going perfect... now i´m able to connect!!!
AT&T ships a only-to-charge cable... so get rid of it !!! that´s it.
Bye.
Click to expand...
Click to collapse
ATT ships an HTC data cable. They do not ship a charge only cable. Most likely you just got a bad cable.
I was following (like an idiot) the instructions for the Advanced Ace Hack Toolkit.
I uninstalled the My HTC phone that was listed in mY Device Manager
64 bit Windows 7 Pro.
Now, no matter what drivers I try to browser for, my computer cannot find a driver for 'Android Phone' when searching.
The HTC Drivers 3.0.0.0.7 installer doesn't seem to do anything, and crashes, saying it's not installed correctly.
Has anyone had this happen, and can correct it?
valdart said:
I just got my Inspire 4G from AT&T... and guess what... no data connection at all. I tried everithing! nothing... so I just bought a new micro usb data cable!!! and voila!! everithing is going perfect... now i´m able to connect!!!
AT&T ships a only-to-charge cable... so get rid of it !!! that´s it.
Bye.
Click to expand...
Click to collapse
Agreed with Ago, you likely have a bad cable. please dont confuse new users. I would go back to att and get them to replace it.
pkopalek said:
I was following (like an idiot) the instructions for the Advanced Ace Hack Toolkit.
I uninstalled the My HTC phone that was listed in mY Device Manager
64 bit Windows 7 Pro.
Now, no matter what drivers I try to browser for, my computer cannot find a driver for 'Android Phone' when searching.
The HTC Drivers 3.0.0.0.7 installer doesn't seem to do anything, and crashes, saying it's not installed correctly.
Has anyone had this happen, and can correct it?
Click to expand...
Click to collapse
First, I would like to know what part of following the instructions causes you to be an idiot?
Second, did you uninstall HTC sync?
Third, I would like to know IF you have tried running the installer as an admin OR if when you run the installer, it has the user account control pop-up asking about changes and the computer (or if you have disabled that through user accounts)
(Oh and I used AAHK's same driver installer on my Windows 7 x64 computer without an issue... sooooooooooooo it's likely a local issue, such as needing to verify the download's checksum, disabling antivirus [something about the first line where in the same section as uninstalling drivers], etc)
AND, a tool like at this page might help a litte... http://www.howtogeek.com/howto/windows-vista/view-the-list-of-installed-drivers-the-easy-way/
or if you wanna command line it...
http://www.howtogeek.com/howto/wind...t-of-installed-drivers-from-the-command-line/
No joy my end either trying to install that HTCDriver3.0.0.007 on a Wind'ohs 7 x64 Shuttle
In certificates under options for this installer, "This certificate has expired or is not yet valid" Valid from 11/ 01/ 2011 to 17/ 01/ 2012". Can anyone help me to locate a driver that I CAN install to let me unlock a HTC Desire please?
Ok guys, sorry to start another thread on this but I have been going through thread after thread and searching endlessly for a solution and nothing has worked for me.
I was getting ready to do the S-Off procedures and my device is recognized by computer to transfer files, and adb recognizes the device as well, I was able to get the device ID. Reboot into bootloader and fastboot just hangs there and no fastboot usb. try to enter fastboot command and it just hangs at "waiting for device"
I started going crazy and uninstalled drivers. Installed HTC Sync, (never needed it before). Now when I plug in USB while in Fastboot computer recognizes device but says it is not working properly.
Under device manager > Android USB Devices > (Yellow triangle) My HTC > Device Status ( This device cannot start Code 10), (A request for the USB BOS descriptor failed). Driver version 2.0.7.14. I try to update the driver manually and it says "It appears the right driver is already installed." Tried disabling enabling. Unistalling, plugging back in. Nothing seems to work.
Running Viper 3.2.3
Windows 8 (didnt have the problem before using fastboot)
Sorry for long post. Thanks in advance.
chriscerv90 said:
Ok guys, sorry to start another thread on this but I have been going through thread after thread and searching endlessly for a solution and nothing has worked for me.
I was getting ready to do the S-Off procedures and my device is recognized by computer to transfer files, and adb recognizes the device as well, I was able to get the device ID. Reboot into bootloader and fastboot just hangs there and no fastboot usb. try to enter fastboot command and it just hangs at "waiting for device"
I started going crazy and uninstalled drivers. Installed HTC Sync, (never needed it before). Now when I plug in USB while in Fastboot computer recognizes device but says it is not working properly.
Under device manager > Android USB Devices > (Yellow triangle) My HTC > Device Status ( This device cannot start Code 10), (A request for the USB BOS descriptor failed). Driver version 2.0.7.14. I try to update the driver manually and it says "It appears the right driver is already installed." Tried disabling enabling. Unistalling, plugging back in. Nothing seems to work.
Running Viper 3.2.3
Windows 8 (didnt have the problem before using fastboot)
Sorry for long post. Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2066805
Hope this helps.
AT&T HTC OneX
Android 1.1.1
ViperXL
Venomtester said:
http://forum.xda-developers.com/showthread.php?t=2066805
Hope this helps.
AT&T HTC OneX
Android 1.1.1
ViperXL
Click to expand...
Click to collapse
Thanks for the reply. That linked me to all the threads I went through by searching myself. I was just taking a stab to see if anyone had a new solution. Weird that this just started for me. VERY FRUSTRATING.
Windows XP makes life easier
chriscerv90 said:
Thanks for the reply. That linked me to all the threads I went through by searching myself. I was just taking a stab to see if anyone had a new solution. Weird that this just started for me. VERY FRUSTRATING.
Click to expand...
Click to collapse
Did you try searching resolutions at Microsoft?
http://technet.microsoft.com/en-us/library/cc725873(v=WS.10).aspx
AT&T HTC OneX
Android 4.1.1
ViperXL
Venomtester said:
Did you try searching resolutions at Microsoft?
http://technet.microsoft.com/en-us/library/cc725873(v=WS.10).aspx
AT&T HTC OneX
Android 4.1.1
ViperXL
Click to expand...
Click to collapse
Thanks for the tip lol
I tried similar steps.
I did a fresh install of windows too. I know I am a little obsessive. Still can't get the dang thing to be recognized in fastboot.
chriscerv90 said:
Thanks for the tip lol
I tried similar steps.
I did a fresh install of windows too. I know I am a little obsessive. Still can't get the dang thing to be recognized in fastboot.
Click to expand...
Click to collapse
I know this may sound silly at this point but did you try moving it to a different usb port? I have seen that work before.
AT&T HTC OneX
Android 4.1.1
ViperXL
try using this application if you think your device drivers are dirty but installed correctly for usb devices
USBDeview just uninstall whatever devices you want reinitialized especially since they can change even with rom changes so it is good to clear some old ones out by sorting them based on Last Plug/Unplug Date.
I had to use a different Micro-USB cable to get it work. Try that.
Yeah I actually have tried all those steps. Thanks for the replies guy. I check out that application.
I'm starting to think something is wrong with my HOX
Sent from my HTC One X using xda app-developers app
DvineLord said:
try using this application if you think your device drivers are dirty but installed correctly for usb devices
USBDeview just uninstall whatever devices you want reinitialized especially since they can change even with rom changes so it is good to clear some old ones out by sorting them based on Last Plug/Unplug Date.
Click to expand...
Click to collapse
This FREAKING WORKED!!!!!!!!!! HAHAHA Thanks man ... I've only had 2 hours of sleep trying to fix this stupid problem... I owe you one man. :highfive:
glad you got it fixed, check out his other apps they are life savers and they work how "real" windows apps should work.
I have the same problem
chriscerv90 said:
This FREAKING WORKED!!!!!!!!!! HAHAHA Thanks man ... I've only had 2 hours of sleep trying to fix this stupid problem... I owe you one man. :highfive:
Click to expand...
Click to collapse
I have the the same problem my computer does not recognise the device ( htc one x endeavour) and in fastboot mode it does not work.
pls help
how you solved this ??
abhilashlinge said:
I have the the same problem my computer does not recognise the device ( htc one x endeavour) and in fastboot mode it does not work.
pls help
how you solved this ??
Click to expand...
Click to collapse
If your on Windows 8 problems will occur but there are methods you need to look into. Windows 7 is your ally.
First Uninstalled the drivers for the device using the program in the previous post. Second, make sure your cable is working correctly. Third, make sure you have the correct drivers for you phone on the computer - - HTC Sync causes problems sometimes. Fourth, plug in the phone in while it's on and let the drivers install correctly. Fifth, place the phone in fastboot and let drivers install. Should work.
Remember sometimes you need to restart your computer and try different USB ports. Some users have said 3.0 ports cause problems.
Good luck.
Sent from my SM-N900A using XDA Premium 4 mobile app
chriscerv90 said:
Ok guys, sorry to start another thread on this but I have been going through thread after thread and searching endlessly for a solution and nothing has worked for me.
I was getting ready to do the S-Off procedures and my device is recognized by computer to transfer files, and adb recognizes the device as well, I was able to get the device ID. Reboot into bootloader and fastboot just hangs there and no fastboot usb. try to enter fastboot command and it just hangs at "waiting for device"
I started going crazy and uninstalled drivers. Installed HTC Sync, (never needed it before). Now when I plug in USB while in Fastboot computer recognizes device but says it is not working properly.
Under device manager > Android USB Devices > (Yellow triangle) My HTC > Device Status ( This device cannot start Code 10), (A request for the USB BOS descriptor failed). Driver version 2.0.7.14. I try to update the driver manually and it says "It appears the right driver is already installed." Tried disabling enabling. Unistalling, plugging back in. Nothing seems to work.
Running Viper 3.2.3
Windows 8 (didnt have the problem before using fastboot)
Sorry for long post. Thanks in advance.
Click to expand...
Click to collapse
I ws installing a Ruu zip but process got failed and hboot version changed to 1.54.000 . my device is in now relocked status and bootloader is not reconised by hp envy. adb still showing my device my i lost fastboot mode completely. Any solution there???
I already tried several drivers method. Error is something HTCAND4 in driver events log.
What did u do?
Hello, yes this is my first post. Glad to finally be on here.
But, unfortunately it starts off with a problem.
I have the Android Revolution HD XE 7.2 ROM installed on my phone, completely rooted S-OFFed and so on.
My problem is that now I'm starting to get into developing android apps, and trying to get my computer to detect the phone has been very tricky indeed. I'm using Eclipse with the SDK installed, I've developed on other phones, I was using a Samsung one the other day so I know everything is working.
I attempted to install HTC sync which I believe is what I need to make the USB connection work, all worked fine. Only when I use "adb devices" nothing is detected.
So I'm guessing this is either down to the fact the phone is all custom and it doesn't exist to HTC sync, or because I'm running Windows 8.1 and something has screwed up down the line. In device manager my phone is listed as 'Android Device' with a yellow triangle because it can't find any driver automatically, but I'm still able to transfer files to the SD card via usb and everything works, just development doesn't (and yes, debugging mode is active).
Help appreciated, and please treat me as the newcomer I appear to be, use small words
Install HTC drivers
I can't post the link because I am not in my pc right now
Use also usb 2.0 ports not 3.0
Sent from my HTC Sensation Z710e using xda premium
Harriertech said:
Hello, yes this is my first post. Glad to finally be on here.
But, unfortunately it starts off with a problem.
I have the Android Revolution HD XE 7.2 ROM installed on my phone, completely rooted S-OFFed and so on.
My problem is that now I'm starting to get into developing android apps, and trying to get my computer to detect the phone has been very tricky indeed. I'm using Eclipse with the SDK installed, I've developed on other phones, I was using a Samsung one the other day so I know everything is working.
I attempted to install HTC sync which I believe is what I need to make the USB connection work, all worked fine. Only when I use "adb devices" nothing is detected.
So I'm guessing this is either down to the fact the phone is all custom and it doesn't exist to HTC sync, or because I'm running Windows 8.1 and something has screwed up down the line. In device manager my phone is listed as 'Android Device' with a yellow triangle because it can't find any driver automatically, but I'm still able to transfer files to the SD card via usb and everything works, just development doesn't (and yes, debugging mode is active).
Help appreciated, and please treat me as the newcomer I appear to be, use small words
Click to expand...
Click to collapse
Here is the link of the drivers:
http://forum.xda-developers.com/showthread.php?t=2217396
You can choose the driver that meet your requirement.
I have already attempted that before actually going ahead and installing the full HTC Sync. I'm beginning to believe the problem must lie somewhere else because the drivers are there and work fine, my phone connects just fine but it's not visible to adb or anything.
EDIT: I managed to fix it by using this thread: http://forum.xda-developers.com/showthread.php?t=2061435
whether it is the best solution I don't know because it's pretty old, however my phone now gets found by adb.
Thanks for the help guys!