I rooted with Casual and selected TWRP for Custom Recovery. Everything seems to be working fine, but I have been unable to start TWRP. With phone off, I hold volume down + Power. The phone will vibrate every few seconds until I release the power button. Then it starts in normal Android mode. Am I trying to start this in the wrong way or is there something messed up with TWRP on my phone?
joekiv said:
I rooted with Casual and selected TWRP for Custom Recovery. Everything seems to be working fine, but I have been unable to start TWRP. With phone off, I hold volume down + Power. The phone will vibrate every few seconds until I release the power button. Then it starts in normal Android mode. Am I trying to start this in the wrong way or is there something messed up with TWRP on my phone?
Click to expand...
Click to collapse
Until you flash a rom that has a custom menu to boot to recovery you have to hold volume up plus the home key while hitting the power button. Let the power button go but keep holding the volume up and home key then TWRP should start up.
Edit: You can also download Quick Boot by Sirius app from the play store and see if that gets you to your recovery until you get a rom on that let's you boot straight to recovery.
TheAfroSamurai said:
Until you flash a rom that has a custom menu to boot to recovery you have to hold volume up plus the home key while hitting the power button. Let the power button go but keep holding the volume up and home key then TWRP should start up.
Edit: You can also download Quick Boot by Sirius app from the play store and see if that gets you to your recovery until you get a rom on that let's you boot straight to recovery.
Click to expand...
Click to collapse
The buttons worked BUT TWRP isn't. I have an Android Robot, out for the count, he is on his back. The recovery must be messed up.
joekiv said:
The buttons worked BUT TWRP isn't. I have an Android Robot, out for the count, he is on his back. The recovery must be messed up.
Click to expand...
Click to collapse
That's the stock recovery. Download too manager and install twrp from the settings menu
Sent from my SCH-I535
jhoutz said:
That's the stock recovery. Download too manager and install twrp from the settings menu
Sent from my SCH-I535
Click to expand...
Click to collapse
Thanks, but I already tried redoing TWRP with Goo Manager. Program ran fine & finished, but when I rebooted into recovery I got the dead Android Robot again. Don't know how to proceed at this point. May try re-running Casual. Still reading everything I can find on this situation before doing anything.
From a powered off state, hold volume UP, home, and power. Let go of the power button when the phone vibrates.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
From a powered off state, hold volume UP, home, and power. Let go of the power button when the phone vibrates.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Done that multiple times, same result - Android on back. Tried redoing TWRP with Goo manager, also Checked on lock/unlock with Ez Unlock - got "status unknown". Did not risk pressing either 'Lock' or 'Unlock' and exited app. Not sure what to do next.
Phone is working. Can make calls, messages, use & install apps and change settings. SuperSU is working, TB Pro is working. I did TB Backups & uninstalled multiple locked apps (Bloatware) before discovering that I cannot get into a working TWRP Recovery.
Any suggestions would be greatly appreciated.
joekiv said:
Done that multiple times, same result - Android on back. Tried redoing TWRP with Goo manager, also Checked on lock/unlock with Ez Unlock - got "status unknown". Did not risk pressing either 'Lock' or 'Unlock' and exited app. Not sure what to do next.
Phone is working. Can make calls, messages, use & install apps and change settings. SuperSU is working, TB Pro is working. I did TB Backups & uninstalled multiple locked apps (Bloatware) before discovering that I cannot get into a working TWRP Recovery.
Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Odin flash a TWRP tar. Uncheck auto-reboot, once it successfully flashes, pull the battery then try booting directly into twrp.
SlimSnoopOS said:
Odin flash a TWRP tar. Uncheck auto-reboot, once it successfully flashes, pull the battery then try booting directly into twrp.
Click to expand...
Click to collapse
Will Odin work if I am unable to get the phone into a working bootloader?
joekiv said:
Will Odin work if I am unable to get the phone into a working bootloader?
Click to expand...
Click to collapse
It should. There's download mode and there's recovery mode. You are having issues flashing a recovery. I don't see anything in your prior posts about difficulty accessing anything else.
SlimSnoopOS said:
It should. There's download mode and there's recovery mode. You are having issues flashing a recovery. I don't see anything in your prior posts about difficulty accessing anything else.
Click to expand...
Click to collapse
Your link above for the "TWRP Tar" goes to a page that instructs to go into odin mode on the 'device' by pressing Vol down, home and power. When I do that I get the Android Robot standing and a message that says "Downloading Custom, do not turn off device". At this point no buttons work and I have no choices do do anything and have to do a battery pull to get out. If I go in any other way I get the Robot on its back.
EDIT: You link was only for the purpose of getting the tar file, not a suggestion to use Odin Mobile. I think that all of the time I spent reading about this issue is affecting my brain.
joekiv said:
Your link above for the "TWRP Tar" goes to a page that instructs to go into odin mode on the 'device' by pressing Vol down, home and power. When I do that I get the Android Robot standing and a message that says "Downloading Custom, do not turn off device". At this point no buttons work and I have no choices do do anything and have to do a battery pull to get out. If I go in any other way I get the Robot on its back.
Click to expand...
Click to collapse
Yes, you use Odin from a computer and boot your phone into download mode then connect it via usb to flash files. Based on your post, you haven't used Odin before have you?
Edit: If it makes it easier, this thread has a [HOW TO] for Odin and the process of flashing tar files as well.
SlimSnoopOS said:
Yes, you use Odin from a computer and boot your phone into download mode then connect it via usb to flash files. Based on your post, you haven't used Odin before have you?
Edit: If it makes it easier, this thread has a [HOW TO] for Odin and the process of flashing tar files as well.
Click to expand...
Click to collapse
No I haven't, but I realized (slowly) what you meant and edited my last post, Probably while you were posting this.
joekiv said:
No I haven't, but I realized (slowly) what you meant and edited my last post, Probably while you were posting this.
Click to expand...
Click to collapse
Ahh, I see that now. Also, per your earlier statement about EZ Unlock. If you have v1.2, just tapping unlock does not harm the phone in any capacity. In fact, fact I encourage you to do so just before using Odin (from a computer) to flash TWRP or CWM. EZ Unlock v1.2 only unlocks the bootloader.
Sent from my SCH-I535 using Tapatalk 4
Did your suggestion and Ran Ez Unlock again and pressed 'Unlock', Status now says UNlocked. Now that it does I'm going to give Goo Manager 1 more shot at fixing TWRP before I run Odin with the TWRP Tar you linked to.
joekiv said:
Did your suggestion and Ran Ez Unlock again and pressed 'Unlock', Status now says UNlocked. Now that it does I'm going to give Goo Manager 1 more shot at fixing TWRP before I run Odin with the TWRP Tar you linked to.
Click to expand...
Click to collapse
Cool, let me know what happens.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Cool, let me know what happens.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Ran Goo Manager, but no success. Put phone in download mode and used Odin to flash recovery with openrecovery-twrp-2.6.1.0-d2vzw.tar. Odin ran through to end and showed "Pass" and rebooted. Used Vol UP, Home & Power keys to enter TWRP got the Robot on his back with a Red Exclamation mark with this message below:
# Manual Mode #
"...Applying Multi ...CSC
Applying the CSC Code: VZW
Successfully applied Multi-CSC
I have 6 choices on this screen.
1 Reboot System Now (I pressed power and phone booted normally)
2 Apply Update from ADB
3.Apply Updated from External Storage
4 Wipe Data/Factory Reset
5 Wipe Cache Partition
6 Apply update from Cache
So I still can't get into TWRP and the only difference is now the Red Exclamation Point.
Did you uncheck "auto reboot" and pull the battery and boot into TWRP like I said before?
Here's a third method if the above does not work. Download EZ Recovery from the Play Store. Once you've done so, you can use my prior link from Rootzwiki and download a TWRP img (image) and use EZ Recovery to install that img file. For this method, make sure to use TWRP.img. Do not use the "tar" file, for this method, tar files are for Odin only.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Did you uncheck "auto reboot" and pull the battery and boot into TWRP like I said before?
Here's a third method if the above does not work. Download EZ Recovery from the Play Store. Once you've done so, you can use my prior link from Rootzwiki and download a TWRP img (image) and use EZ Recovery to install that img file. For this method, make sure to use TWRP.img. Do not use the "tar" file, for this method, tar files are for Odin only.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
SUCCESS! Flashed the recovery again, BUT this time with Auto reboot unchecked as you previously told me to do and that I missed. Thank you, not only for your help, but for all your patience as well.
joekiv said:
SUCCESS! Flashed the recovery again, BUT this time with Auto reboot unchecked as you previously told me to do and that I missed. Thank you, not only for your help, but for all your patience as well.
Click to expand...
Click to collapse
Ahh, sweet! haha glad I could help you out!
Related
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Txkw said:
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Click to expand...
Click to collapse
I am also facing the exact same problem. Can someone kindly guide us please?
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
My power button is broken too.
I solved the problem flashing ClockworkMod Touch from Windows Terminal.
DJBhardwaj said:
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
polobunny said:
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
Click to expand...
Click to collapse
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
a2zRulz said:
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
Click to expand...
Click to collapse
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
polobunny said:
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
Click to expand...
Click to collapse
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
a2zRulz said:
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
Click to expand...
Click to collapse
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
polobunny said:
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
Click to expand...
Click to collapse
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
a2zRulz said:
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
Click to expand...
Click to collapse
Ok let's get this right
What is your goal? Flash a different recovery? Then you can flash a recovery from within something such as ROM Manager if your rom still boots.
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
a2zRulz said:
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
Click to expand...
Click to collapse
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
polobunny said:
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
Click to expand...
Click to collapse
You sir, are my hero... Many thanks for this :highfive: :victory:
If you are flashing a touch version of CWM recovery, I highly suggest v6.0.1.0. The later version (up to 6.0.2.5) have a bug that will make you unable to mount the SD card within the recovery. Otherwise TWRP is very interesting, but backups made with CWM are not compatible with TWRP.
Thanks, I'll try TWRP this time
Trying to install CyanogenMod for my razr maxx HD. Recently used RSDlite to install 183.46.10 after OTA KK update kept failing. Then used towelroot to root and motopocalype to unlock bootloader. Fastboot screen shows bootloader is unlocked with status code: 3.
I then followed the instructions on the CyanogenMod site to flash CWM 6.0.4.4 recovery using fastboot, and all appeared to work fine.
However, when I try to reboot into recovery, nothing happens. I get hung up on the motorola dual core flashscreen for about a minute or two, then the screen goes black, then the phone reboots normally.
I tried flashing a different copy of CWM, tried TRWP, and tried several third party apps from Google Play store to boot directly into recovery using software reboot instead of hardware keys - all with the same results. I even tried flashing custom CWM recovery using ROM Manager and Rashr, same result.
Do I have a corrupt recovery partition? Any suggestions for how to fix?
You need to install a recovery for that phone specifically.
http://androidhosting.org/Devs/Dhacker29/
Use the recovery files found here.
Edit: on the site I posted, browse to the msm8690 folder. There you will find the recovery files.
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Thanks, guys, total noob mistake. I knew the recovery needed to be specific for the phone, but didn't realize it varied depending on the bootloader. Will try again with the right recovery!
billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk
TheGman125 said:
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".
iBolski said:
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".
Click to expand...
Click to collapse
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.
TheGman125 said:
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.
iBolski said:
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.
Click to expand...
Click to collapse
Yes my bootloader is unlocked. Have code 3 on the devices.
try and unplug from USB when you reboot
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
rspilot1 said:
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
Click to expand...
Click to collapse
Hi. What recovery are you using?
If you haven't installed a custom recovery, then that explains your issue. Basically, the app scheduled a custom recovery script which kept failing in the stock recovery. You should normally be able to reboot into the system holding the power button, thus skipping going to recovery. This also resets the recovery script so everything is back to normal.
Nandroid is normally only possible using a custom recovery like TWRP or CWM.
I saw that you might be able to perform a Nandroid without restarting the phone (so without a custom recovery) using this app: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup&hl=en
I have never tried it. Looks promising though.
But please note that you won't be able to restore the backup without a custom recovery.
EDIT: If you do have a custom recovery, why not boot in recovery mode and make the backup from there?
Cheers
Recovery Boot Loop Problem
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
rspilot1 said:
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
Click to expand...
Click to collapse
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Click to expand...
Click to collapse
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
rspilot1 said:
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
Click to expand...
Click to collapse
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Click to expand...
Click to collapse
Thank you, that answered some questions.
you've been a great help.
Recovery Boot Loop Problem
rspilot1 said:
Thank you, that answered some questions.
you've been a great help.
Click to expand...
Click to collapse
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
rspilot1 said:
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
Click to expand...
Click to collapse
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Recovery Boot Loop Problem
andreiav said:
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Click to expand...
Click to collapse
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Recovery Boot Loop Problem
rspilot1 said:
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Click to expand...
Click to collapse
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
rspilot1 said:
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
Click to expand...
Click to collapse
Yep. 5 minutes process at most
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Yep. 5 minutes process at most
Sent from my GT-I9505
Click to expand...
Click to collapse
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
rspilot1 said:
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
Click to expand...
Click to collapse
Awesome! Really glad it worked.
Cheers!
Sent from my GT-I9505
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
ure going about this all wrong mate
as already explained in the other thread, u cant enter twrp that way. if u press power up in the start screen ull always end up in the erecovery, no matter which regular recovery u have flashed.
easiest way to enter regular recovery is to install flashify from the playstore and choose to reboot phone into recovery
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
cheth20 said:
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
Click to expand...
Click to collapse
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp.
Click to expand...
Click to collapse
This.
Power plus volume down does nothing, TWRP-wise. However that is whta's being said to press in 99% of the threads/tutorials.
Took me HOURS and countless re-flashing of TWRP to figure this out myself. (the up *plus* down thingy). Really annoying.
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
Thanks a ton! this worked
cheth20 said:
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
Click to expand...
Click to collapse
Well, I have a question. What is the eRecovery, because I've seen this screen also and I dont know what it does. Also, there are three options in it: download latest version and recovery, reboot and shutdown. So if I press download latest version and recovery what will happen? Because I'm actually looking for a way to get off TWRP without having to lose any data (I want to install the latest OTA, but I've seen that TWRP doesn't support well those, and I don't want to mess up my phone)...
Please help!
easy: download a stock rom identical to your current version, extract recovery partition using the huawei app extractor from the rom's update.app file and then flash that through fastboot
and since u probably have no idea what im talking about, i suggest u use google and xda search functions before asking any further questions here dont be lazy and expect everyone to work for you and serve everything on a silver platter, do your due diligence!
Sent from my Huawei Mate 8 NXT-AL10
Hi, simply press Volume up an down at same time when device is powering up...and hold it, until Twrp logo is on the screen. Works always for me.
Greets Tobias
OMGiidiness
Guys, volume-up+power goes to recovery
Volume-down+power goes to fastboot or bootloader
bluheart said:
OMGiidiness
Guys, volume-up+power goes to recovery
Volume-down+power goes to fastboot or bootloader
Click to expand...
Click to collapse
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)
True, when usb is attached
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Click to expand...
Click to collapse
I can attest to this, i flashed twrp many times thinking it was not working beacause i am used to the mate 7 holding volume up + power long enough boots into recovery (twrp) but this won't work on mate 8
sibiyav1486 said:
I can attest to this, i flashed twrp many times thinking it was not working beacause i am used to the mate 7 holding volume up + power long enough boots into recovery (twrp) but this won't work on mate 8
Click to expand...
Click to collapse
Works just fine.
Work like a charm
cheth20 said:
Thanks a ton! this worked
Click to expand...
Click to collapse
Work like a charm ...
Same to me
I see same this problem from my Honor 6X Pakistani version
installed twrp in my ,honor 5c,,,but cant get to the recovery,,tried every version of u tip,guys,,,what to do,,,,?
I have same problem, in theory i have TWRP as recovery but when star entry in eRecovery .... help
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
Thanks mate it worked out perfectly.
to come to twrp hold on the volume+ and volume- works on mine P10
Hi,
I have S8 Plus SM-G955F in Germany.
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery. However, it does not enter into recovery and reboots after few seconds into "installing updates" mode which then fails.
It does not boot up into Android.
All I can access to is Download Mode.
I flashed "BL_G955FXXU1AQF7_CL11544126_QB13847503_REV00_user_low_ship.tar" Bootloader and rebooted and now it is stuck in Samsung boot logo. If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
I now downloaded following stock firmware through SamFirm: "SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
but when trying to flash it in odin I get FAILED !!! Also if I try to flash TWRP recovery "twrp-3.1.0-1-dream2lte.img" I get FAILED in Odin I now also tried to flash "AP_G955FXXU1AQH3_CL12050265_QB14545623_REV00" firmware using this tutorial: https://www.youtube.com/watch?v=2y0ZZxcNVnE which also FAILED. I think I am completely bricked !!
Please help, phone is completeley useless now
Thanks!
tobyffm said:
SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
Click to expand...
Click to collapse
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Maltonator said:
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Click to expand...
Click to collapse
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
tobyffm said:
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
Click to expand...
Click to collapse
But you flashed all four files at the same run together?
Maltonator said:
But you flashed all four files at the same run together?
Click to expand...
Click to collapse
Yes, like the howto video described.
tobyffm said:
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery.
Click to expand...
Click to collapse
But this happens with my phone to if I press volume up.
tobyffm said:
If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
Click to expand...
Click to collapse
But you have to press Vol down
Maltonator said:
But this happens with my phone to if I press volume up.
But you have to press Vol down
Click to expand...
Click to collapse
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
tobyffm said:
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Click to expand...
Click to collapse
But why do you boot in recovery mode?
tobyffm said:
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
Click to expand...
Click to collapse
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Maltonator said:
But why do you boot in recovery mode?
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Click to expand...
Click to collapse
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
tobyffm said:
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Maltonator said:
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Click to expand...
Click to collapse
Did already, did not help. I think maybe there is something realldy bricked, so flashing stock firmware wont be possible at all anymore?! Is this possible somehow?
btw: Just managed to load into TWRP, randomly it does load twrp, dont know how, because if I press the keys for loading into recovery, it actually does not do anything, but currently I see twrp.
Is see anything I can try from there? btw: formated data (incl. internal storage) earlier already, but it did not change anything.
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
tobyffm said:
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
Click to expand...
Click to collapse
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Maltonator said:
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Click to expand...
Click to collapse
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
tobyffm said:
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
Click to expand...
Click to collapse
Glad it worked! :good:
tobyffm said:
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
My mistake, sorry - I posted in the wrong place- sorry. (I do hope you find a way to get t his fixed) good luck
I just ran into this thread: https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
It looks like you're not the only one...
You know, you might want to try and remove the more current apps you installed and see if that is causing the loop, and if that does not work, just dirty flash over what you have. For me, a lot of time a dirty flash will solve the issue, as it overwrites the OEM software, and in that manner, takes my phone OS back to normal/new state, while leaving my data.