[Q] No sim card - no service after unlocking - HTC Sensation

Hi all, I think I looked everywhere for similar issue, including xda, but no luck. I got my "new" Sensation yesterday and, obviously, I wanted to have a custom rom as I do on my Desire. So I unlocked the bootloader and flashed both recovery and new rom (yes, the phone is still S-ON because I just couldn't get it to S-OFF, no matter what method I tried there was always an issue and I couldn't complete the procedure. if it's important I can explain in details what I tried/not tried). Right now it sits on CM-10.2 | AOSP 4.3 Jellybean [KANG] with 4EXT recovery. Everythin is fine however the phone is locked to O2 and I'm with T-Mobile. I tried to get the phone to S-OFF in order to remove the simlock myself but as I mentioned, no luck. So I got pissed off and I bought the unlock pin code. I've inserted my T-Mobile card, phone asked for the pin, I've entered it and boom, phone is unlocked. Great, I think to myself... well not really. One, the phone just won't get the signal (and I tried putting it to GSM mode only) and two, every time I reboot it the message to enter network pin come up . So I enter the code again and that's the end of the loop. Tried hard reset after entering the pin code but after a reboot it would still ask for the unlock pin and then won't pick up any signal. I've tried giffgaff sim card and that works straight away (as it works under O2) so it's not the phone issue (well, not the sim card port anyway).
Any ideas/solution/questions a-ny-thing would be greatly appreciated as I'm about to rage quit and give up on it .

bboybtek said:
Hi all, I think I looked everywhere for similar issue, including xda, but no luck. I got my "new" Sensation yesterday and, obviously, I wanted to have a custom rom as I do on my Desire. So I unlocked the bootloader and flashed both recovery and new rom (yes, the phone is still S-ON because I just couldn't get it to S-OFF, no matter what method I tried there was always an issue and I couldn't complete the procedure. if it's important I can explain in details what I tried/not tried). Right now it sits on CM-10.2 | AOSP 4.3 Jellybean [KANG] with 4EXT recovery. Everythin is fine however the phone is locked to O2 and I'm with T-Mobile. I tried to get the phone to S-OFF in order to remove the simlock myself but as I mentioned, no luck. So I got pissed off and I bought the unlock pin code. I've inserted my T-Mobile card, phone asked for the pin, I've entered it and boom, phone is unlocked. Great, I think to myself... well not really. One, the phone just won't get the signal (and I tried putting it to GSM mode only) and two, every time I reboot it the message to enter network pin come up . So I enter the code again and that's the end of the loop. Tried hard reset after entering the pin code but after a reboot it would still ask for the unlock pin and then won't pick up any signal. I've tried giffgaff sim card and that works straight away (as it works under O2) so it's not the phone issue (well, not the sim card port anyway).
Any ideas/solution/questions a-ny-thing would be greatly appreciated as I'm about to rage quit and give up on it .
Click to expand...
Click to collapse
Hi,
Could it just be the t-mob sim card?
Is there any chance to get a new one from them?

malybru said:
Hi,
Could it just be the t-mob sim card?
Is there any chance to get a new one from them?
Click to expand...
Click to collapse
Thought that but the card works fine in my Desire. Never had any problems with it. What gets me is that constant message asking for the network pin after rebooting the phone. Surely once the code is entered the phone is unlocked ...
If I can't find any solution by monday I'll visit their shop and ask for a new sim or I'll just move my number to giffgaff >_>

Obviously if anyone has any solutions or ideas feel free to share them and I will be sure to try them. I'd really appreciate it!!
Sorry for double post

Related

[Q] Seriously need help with unlocked ATT One X

Alright guys, I am posting out of desperation.
I am no pro when it comes to rooting/unlocking/ROMming Android phones but I have read myself to death and I am not getting anywhere. I am almost willing to send this phone to someone who knows what they are doing. I really don't feel like buying another phone. In hindsight, I should've made sure I was getting a true unbranded HOX.
I bought an unlocked, AT&T One X from Amazon while I was in Afghanistan. Received the phone via APO, put in my Roshan SIM card, and was working fine. I traveled extensively in the past few months, all over the Middle East and South Asia, phone was working fine, I just picked up a local sim card and off I went.
Well then I went back to the US for the first time with this phone. Put in my TMobile SIM, and was working fine as well. Well now I left the country again, and now I can't pick up any networks at all. I have changed the radio via the USSD to GSM, WCDMA, everything, but can't pick up any networks. Keep in mind I also still have my SIM card that I bought when I was here. I insert the card, it says preparing sim card, etc, but won't find any networks.
How do I know if the phone is still SIM unlocked? Woulnd't it prompt me for an unlock code when I insterted the foreign SIM again? Do I need to root? Does my bootloader need to be unlocked to use any SIM?
What I was figuring I would try to do was flash a different ROM so I don't have to worry about this being an AT&T phone anymore. When I boot into the bootloader, it says LOCKED at the top with S-ON. There has never been an update done to the phone since I got it.
Things i've tried:
Any root for 1.85 ( I have tried every root for 1.85 you can search for on here)
RUU to update to 2.2 (says main battery power low, but it isn't)
Factory Reset
I really don't care so much to get a new ROM, I just want my phone to work. Here is what I get in the info page on the phone:
The bootloader says HBOOT 1.09 is installed
Kernel Version:
3.0.8-01155-gca24d1e
[email protected] #1
SMP PREEMPT
Build Number
1.85.502.3_R2 CL63811 release-keys
Sense 4.0
Android 4.0.3
Software Number
1.85.502.3 710RD
If you need any more info let me know but I am dying here
Sim unlock and bootloader unlock are two different things. I don't think either has anything to do with the other.
Assuming you bought this from a legit seller on Amazon, factory unlocked is factory unlocked. I've never heard of a phone getting sim locked from putting in a sim card. If you didn't get a "input unlock code" the first time, your phone isn't sim locked and is not locked down to AT&T.
Before you can root, though, you have to unlock the bootloader. That's why your root attempts keep failing. You want to stay on 1.85, trust me--later firmware is more locked down.
Are you sure there's nothing wrong with the other sim card you got? Have you tried a new one?
iElvis said:
Sim unlock and bootloader unlock are two different things. I don't think either has anything to do with the other.
Assuming you bought this from a legit seller on Amazon, factory unlocked is factory unlocked. I've never heard of a phone getting sim locked from putting in a sim card. If you didn't get a "input unlock code" the first time, your phone isn't sim locked and is not locked down to AT&T.
Before you can root, though, you have to unlock the bootloader. That's why your root attempts keep failing. You want to stay on 1.85, trust me--later firmware is more locked down.
Are you sure there's nothing wrong with the other sim card you got? Have you tried a new one?
Click to expand...
Click to collapse
Really? The bootloader has to be unlocked before you can root? I definitely thought it was the other way around. I guess that would explain it, then..
What I actually ended up doing was repeatably trying the RUU, and finally got it to take the 2.2FW upgrade. As soon as that happened, I was pulling down 4G like nobodies business. Though, now that i've read your post, I kind of wish I would've stuck with trying to get a new ROM on it, instead of upgrading. I really have no idea why a FW upgrade made the radio start working like magic, or what would casue that at all.
Frosty288 said:
Really? The bootloader has to be unlocked before you can root? I definitely thought it was the other way around. I guess that would explain it, then..
What I actually ended up doing was repeatably trying the RUU, and finally got it to take the 2.2FW upgrade. As soon as that happened, I was pulling down 4G like nobodies business. Though, now that i've read your post, I kind of wish I would've stuck with trying to get a new ROM on it, instead of upgrading. I really have no idea why a FW upgrade made the radio start working like magic, or what would casue that at all.
Click to expand...
Click to collapse
Progress is swift. I rooted using the 2.2 xfactor exploit and then unlocked the bootloader with the spoofed CID, now as soon as I figure it out I will install CleanROM 5.1..Hope I don't brick it!
Frosty288 said:
Progress is swift. I rooted using the 2.2 xfactor exploit and then unlocked the bootloader with the spoofed CID, now as soon as I figure it out I will install CleanROM 5.1..Hope I don't brick it!
Click to expand...
Click to collapse
As long as you stay in this forum, these phones are tough to brick. The only way to do it is to flash roms for the international (Tegra 3) version.
Note that on 2.20., you have to flash the boot.img in fastboot when you flash a rom.
Youll never brick your phone as long as you have access to the bootloader or recovery lol
Sent from my HTC One X using xda app-developers app
If he wants cleanrom he won't have to be confused with fastboot. Just download rom and flash that sucker
Sent from my HTC One X using Tapatalk 2
Do NOT RUU to 2.20! (never mind too late).
Looks like you figured things out.

Tips/Help with Network/SIM Unlock Problem

EDIT: Nevermind, I called ATT to double check and they gave me a different code that worked. Sorry for the post.
I know this gets asked alot, but the information, situations, and answers out there are so many it is difficult to determine what needs to be done, so I am hoping someone can at least point me in the right direction.
I had unlocked my bootloader using htcdev, installed 4ext recovery, and flashed latest Cyanogenmod. I have been wanting to switch to T-mobile (I know about the possibility of not having 4g with that) and come to find out, entering the Network PUK code doesnt work in Cyanogen..
I gleaned that I needed to re-flash stock rom and then try to unlock, but I did this, and it still isnt accepting the code, argh. Do I need to relock my bootloader or do anything special? I got this code straight from ATT. With the ATT SIM in the phone, it doesnt ask for it, I restart phone with my T-mobile SIM in, and it asks for the code, but always says its incorrect. How is it checking this anyway, as it doenst seem to be communicating over the mobile network.
Any ideas would be much appreciated, thanks.

[Q] network locked please help

hi folks...think I posted in the wrong section...so here goes...
Hi folks... im a bit of a noob when it comes to phones...basically my Three contract finished today and I inserted my new GiffGaff sim...only to get the Sim Network Unlock Pin....I searched around on here and found the way to get the code using the terminal emulator and the imie code.
I put the 8 digit code in...and got the message Network Unlock Successful .... but I still have no network signal....I rebooted the phone and I kept getting Sim network unlock pin - screen. put the code in....successful...etc.
My next option was moving from cyanogenmod 10.1 to the latest CyanogenMod 11 - Android 4.4.2 - KitKat .... installed fine...but on boot up I still get the unlock pin screen....enter code...unlock successful....no signal ...and back to square one.
does anybody have a way to unlock this?
pleaseeeeeeeeeeeeeee
giving up
well the code aint gonna work....so looking at other options...
ive tried the PG58DIAG.nbh route... but all i get is security fail / reboot my phone is s-on does it need to be s-off for that method?
think its easier to just get another 3 sim and stick with them
thevilla1 said:
well the code aint gonna work....so looking at other options...
ive tried the PG58DIAG.nbh route... but all i get is security fail / reboot my phone is s-on does it need to be s-off for that method?
think its easier to just get another 3 sim and stick with them
Click to expand...
Click to collapse
yes your device requires to be on S-OFF

issue carrier unlocking my one x

Hey guys,
It has been a long time since I have done everything with my AT&T One X and I am having some trouble. I want to carrier unlock my phone so I can use it when I travel to Israel in 2 weeks. I got the code from AT&T through their website. I am running CM-NostromoPop v2.0.4.
The directions I received from AT&T are:
1. Power off the device and remove the AT&T SIM card.
2. Insert non-AT&T SIM card.
3. Power on the device. Wait a few moments, allowing the device to fully power-up.
4. Enter the unlock code when prompted.
5. Press OK. The device is unlocked.
The only microSIM I have is a Verizon SIM I use in my Verizon tablet. It is active on a Verizon account. I put that SIM in and turned on the phone, it popped up asking for the code, I type the code in correctly and press Unlock (it doesn't say OK) and it says "unlock unsuccessful" and waits for me to put the code in again. Has anyone run into the problem? Is the problem more likely to be CyanogeMod of the SIM card? I am currently installing ViperXL on my phone to see if a stock ROM would work better but I only have 2 tries left until my phone is permanently locked to the AT&T network.
I called AT&T and they said factory reset the phone or bring it into an AT&T store. I can't do either of those without flashing back to stock and I cannot figure out how to do that. Can someone explain to me or link me to a post on how to flash back to complete stock (the latest stock version preferrably, I probably won't be rooting my phone or anything anymore)
Some info about my phone:
I am S-OFF
CID is 11111111
HBOOT is 2.15
Radio is 1.31a.32.45.16_2
Recovery is TWRP 2.8.7.1
Thank you very much in advance

(SOLVED) Sim not detecting/Insert a valid sim card on your phone

Hello there, I am not new to xda but this is my first post. I've a question regarding my M8 Verizon bought from ebay. Its been a year now and everything was going well since one day I accidentally did s-on and locked the bootloader while using HTC ONE M8 Toolkit by Squabbi.
Then I again s-off'd my device using Sunshine method (firewater didn't worked as it was discontinued). So I paid 1600₹ to get my device s-off'd and unlocked bootloader. But since then I am unable to use any Indian sim whether airtel, idea or any other. I tried many possible solutions found on the internet as well as here on xda. Like I flashed firmware (old and new both), flashed radio firmware files old and new both but no luck. Either I restored my device to stock Verizon rom using the RUU provided by Dottat. But I couldn't find any luck and I'm still unable to use my sim card. My phone is unable to detect it. My device doesn't even pops up any notification for sim card now. Please Help. :crying:
Is there any solution for this? I'm in a need of this.
Waiting to be helped as soon as possible.
Hi,
I do not know if same pb...
Phone is working fine on Lollipop on european Gsm/LTE (sometimes going back to cdma by itself, a bit boring), and is asking for SIM pin number.
When going to marshmallow (by RUU or by OTA) the sim is deribed to be absent or invadid, and It did ask for the SIM pin number
I did not find any clue...
regards
After a lot of tries, it finally worked. And the sim is now detected. Thanks to Me.
shad.man92 said:
After a lot of tries, it finally worked. And the sim is now detected. Thanks to Me.
Click to expand...
Click to collapse
Hello! I have same problem. I can`t use my sim card. Can you tell me how did you solve this problem?
User 1 said:
Hello! I have same problem. I can`t use my sim card. Can you tell me how did you solve this problem?
Click to expand...
Click to collapse
I disassembled my M8, then replaced the sim reader inside the phone, then removed and reinserted the flex on the board. Then turned on the phone, and edited the system file located inside root/system/customize/ACC/default.xml to change the value of sku_id and region located at last in the file default.xml
You can search on google for SKU LIST XDA. It will show you the list for all regions.

Categories

Resources