Database Info

[GUIDE] Repair bootloop wrong recovery flash Huawei Honor 3X G750-u10

this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.

Not rebooting automatically after fastboot continue command
sevenr33 said:
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Click to expand...
Click to collapse
Hi, I've followed the instructions you gave and now I'm stucked at the part which it wouldn't reboot by itself after i typed the "fastboot command".
1) Before I've had chance to charge my phone, it ran out of battery and fastboot mode does not charge the phone. I've also tried to flash the recovery image in fastboot mode, but i got Err:0x2017, what is this error about?
2) And the GUI should run in location bin files as my fastboot driver, not the 0KB fastboot in default location.
2) Do all these steps require unlocking bootloader? I don't think I've unlocked, all I did was just root the phone.

Help
Hi
I have a rooted Huawei Ascend Mate but I installed the wrong TWRP recovery a few days ago. My phone keeps booting and I can't use my recovery, because it is a touch version but it doesn't respond to my touch. So, I don't know if I can flash my stock rom or another recovery...
Can I use this tutorial to fix my phone or can you please make one for the Huawei Ascend Mate?
kind regards

Guide: How to reboot your Nexus 5 without power button

Hi everyone, I would like to share my experience regarding two methods that I have used to revive a Nexus 5 whose power button just will not work. Please use this guide if your Nexus 5 dies due to a low battery and you want to boot (start) it without power button. Following methods have been successfully tested on Win 7 and 10. You can use this guide and keep using your Nexus 5 without repairing the power button. There are other guides and posts which can help you attain locking, unlocking of the screen and remapping the hardware buttons such as volume keys to perform as a power button.
Method 1
Step 1: Download adb/fastboot binaries or use Android SDK for adb/fastboot. If downloaded as a zip, extract it in a folder. It is better to download adb/fastboot minimal, as it is small and can be handy.
Step 1a: Download your phone drivers and install them. If it is a zip folder then extract it in a folder for later use.
Step 2: Plug in the micro USB in your phone. Hold both volume keys on the phone and while holding the keys plug the USB cable in to your PC’s/laptop’s USB port. Your phone will reboot in Bootloader mode where you will see START written at the top of your phone screen which is the prompt to start the system but you cannot select it, as your phone’s power button does not work.
Step 3: Open Command Prompt in windows, which is cmd . Navigate to your adb/fastboot folder which you created while extracting the zip or you might be able to use the commands from anywhere in command prompt if you have installed Android SDK.
Step 3a: Commands only work if you installed adb/fastboot correctly or you are in the binaries folder. While in the corresponding folder,
Type: fastboot devices
123456789 fastboot
The command will show devices connected in fastboot mode just like the above example
If your phone does not appear here then go to control panel>device manager search for any unknown device such as unknown device or android device ; Right click on it and choose update drivers. Do not select the auto search for updated drivers. Select browse my computer for driver and then browse to the folder where you had extracted the drivers choose the right folder and windows should install your device as android bootloader interface device.
Once installed properly, you should see your device by typing the above command again. When successful
Type: fastboot reboot
Now your phone should reboot and start normally.
Method 2
Step 1: Download Wug's Nexus Root Toolkit by Wugfresh.
Step 1a: Download your phone drivers and install them. If it is a zip folder then extract it in a folder for later use.
Step 2: Plug in the micro USB in your phone. Hold both volume keys on the phone and while holding the keys plug the USB cable in to your PC’s/laptop’s USB port. Your phone will reboot in Bootloader mode where you will see START written at the top of your phone screen which is the prompt to start the system but you cannot select it, as your phone’s power button does not work.
Step 3: Run Nexus Root Toolkit. Let it complete its initialisation and when done its main window will pop up on your desktop. If your using it for the first time it will ask for your phone model and android version. Input the details appropriately, if you do not know the android version you are running choose any build which is at the end of the list.
Step 3a: The toolkit might ask for any dependency files to be downloaded, which it will download automatically. You might be able to skip it but if you use any build or wish not to download them but it won’t harm if you download them as you might wish to use the toolkit later.
Step 4: After completing the above step. Toolkit will finally be ready to use. From the main window of toolkit click Launch under the Advanced Utilities.
Step 5: Choose Reboot System and your phone will reboot normally.
If Toolkit returns, No adb/fastboot device found then follow the next step.
Additional Step: Go to control panel>device manager search for any unknown device such as unknown device or android device ; Right click on it and choose update drivers. Do not select the auto search for updated drivers. Select browse my computer for driver and then browse to the folder where you had extracted the drivers choose the right folder and windows should install your device as android bootloader interface device.
Once drivers are installed, go to Step 5 and it should work for you.
The above methods have been used on Nexus 5 and might be helpful on other Nexus or completely different devices from other brands
For Mods: I have done my good faith search before making this guide. Please let me know if a similar guide exists or I have posted it in a wrong place.
If it has helped anyone please consider a Thanks. By the way it is my first post.
For downloads, please use search engines and you will be happily served.
No responsibility is taken, whatsoever.

[Completed] Asus "unlock tool" doesn't work. Help!

I got tired of ZenUI and I was searching for a method to install CM14. The problem all starts with my bootloader.
I've tried to find an unofficial way to do it and I couldn't find one specific for my phone.
The official one just retarts my phone, or it just tells that there's a network error. Something like that.
I hope I don't need to do downgrading.
Zenfone Selfie Z00UD (ZD551KL)
MMB29P.WW_user_21.40.0.1923. 20161027

Cristianrr said:
I got tired of ZenUI and I was searching for a method to install CM14. The problem all starts with my bootloader.
I've tried to find an unofficial way to do it and I couldn't find one specific for my phone.
The official one just retarts my phone, or it just tells that there's a network error. Something like that.
I hope I don't need to do downgrading.
Zenfone Selfie Z00UD (ZD551KL)
MMB29P.WW_user_21.40.0.1923. 20161027
Click to expand...
Click to collapse
Hello,
You may follow the instructions here.
Later once the configuration is done properly then you can connect your device and enable USB Debugging under the options.
1. Download Modaco Superboot file for Asus Zenfone Selfie Zd551kl from this link : http://downloadsafe.org/file/0YgX7 , and save them to your computer.
Tutorial Video : Easy Way To Download file = http://how-to-root.com/10
2. Once downloaded, extract it by right clicking and extract all.
3. On your device, click on Settings > Developer Options > Turn USB Debugging On.
4. Plug the device in to your computer via USB cable.
5. Open the superboot folder that we just extracted (until you see the folder with fastboot-windows inside it), then hold the shift key down on your computer and right click any blank area.
6. Now, select open command window here.
7. In the command prompt, type the following with hitting enter at the end of each line.
adb-windows reboot bootloader (and wait for the device to reboot) fastboot-windows oem unlock *If it gets stuck at waiting for device here, download and install PDANet on your computer, once installed, unplug then plug the device back in and see if that fixes it.
Once it runs the device should display a screen asking you if you are sure. Click yes using the volume buttons. The device will go back to the bootloader screen but say unlocked at the bottom.
Also here's the firmware needed to unlock bootloader for your reference https://forum.xda-developers.com/zenfone2/help/zd551kl-zenfone-selfie-unlock-t3271243
Regards
Vatsal,
Forum Moderator.

Vatsal said:
Hello,
You may follow the instructions here.
Later once the configuration is done properly then you can connect your device and enable USB Debugging under the options.
1. Download Modaco Superboot file for Asus Zenfone Selfie Zd551kl from this link : http://downloadsafe.org/file/0YgX7 , and save them to your computer.
Tutorial Video : Easy Way To Download file = http://how-to-root.com/10
2. Once downloaded, extract it by right clicking and extract all.
3. On your device, click on Settings > Developer Options > Turn USB Debugging On.
4. Plug the device in to your computer via USB cable.
5. Open the superboot folder that we just extracted (until you see the folder with fastboot-windows inside it), then hold the shift key down on your computer and right click any blank area.
6. Now, select open command window here.
7. In the command prompt, type the following with hitting enter at the end of each line.
adb-windows reboot bootloader (and wait for the device to reboot) fastboot-windows oem unlock *If it gets stuck at waiting for device here, download and install PDANet on your computer, once installed, unplug then plug the device back in and see if that fixes it.
Once it runs the device should display a screen asking you if you are sure. Click yes using the volume buttons. The device will go back to the bootloader screen but say unlocked at the bottom.
Also here's the firmware needed to unlock bootloader for your reference https://forum.xda-developers.com/zenfone2/help/zd551kl-zenfone-selfie-unlock-t3271243
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
I cannot skip the survey. The only one I get requires me to register my phone number. Is there any other download link?
Thank you

[GUIDE] ROOTING and UNROOTING MI A1

Okay I have made this thread after seeing a lot of people facing issues for rooting and unrooting. First of all this is not my work. @jashancheema and others should be credited. This guide is only for Oreo users.
Rooting:
1. Download adb and fastboot drivers on your PC.
OR
Download Platform Tools and extract the contents to a folder
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
2. Enable developer options on your phone
Settings>System>About Phone>Tap on Build Number 5 to 6 times until a message appears "You are a developer" (It may ask for your PIN/Password if any)
3. Go back to your developer options>Enable OEM Unlock>Enable USB Debugging>Disable Automatic Updates
4. Download patched boot image
For Dec patch https://www.androidfilehost.com/?fid=962157660013069123
For Jan patch https://www.androidfilehost.com/?fid=962157660013071407
and place the patched_boot.img file after extracting to the platform tools folder.
5. By holding Shift button, Right click on an empty space in the platform tools folder> Open Command prompt (Open Windows Power Shell if you are using Win 10)
6. Connect your phone to PC via Usb cable
7. Type in CMD adb devices (OR ./adb devices if you are on Win 10) Your device will be shown.
8. Disconnect from USB cable and shut down your phone.
9. Download and install latest magisk manager apk on your phone.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
10. Press volume down+Power button simultaneously until you see fastboot screen.
11. Connect your device to your PC via cable and enter the commands on CMD
Code:
fastboot devices
Code:
fastboot oem unlock
Code:
fastboot boot patched_boot.img
(Use ./fastboot..... if you're on Win 10)
12. Your device will be booted. Go to magisk manager and click on Install using direct method. Reboot once again and you will be rooted.
UNROOTING
So far, according to me, the best method to unroot is to install stock rom.
1. Download miflash tool and install it on your PC.
http://api.bbs.miui.com/url/MiFlash
2. Download the latest stock rom (Jan Patch Stable) and extract it on your PC
http://en.miui.com/download-333.html
3. Uninstall all the magisk modules and reboot.
4. Uninstall magisk completely and reboot.
5. Connect the phone in fastboot mode to PC and flash the stock rom via miflash. Remember to check the "save data" option.
You will be unrooted.

It appears this guide has already been posted here:
https://forum.xda-developers.com/showpost.php?p=75040045&postcount=1
Please search before posting to avoid duplicate topics.
Thread closed.

Ulefone Power 6 Root

Hello. Has anyone rooted the Ulefone Power 6 yet? Im looking to have TWRP installed onto my new Power 6. My goal is to figure out a way to add user profiles, as it currently does not have them activated. I read online that you could edit the .prop to have any android activate the user profiles, but i cannot do this without my phone being rooted. Thanks in advance.

Start Here

Dvalin21 said:
Start Here
Click to expand...
Click to collapse
Sorry, This is for the original Ulefone Power, not the Power 6. Different phones. The instructions didn't lead me to anything useful. I have since update my phone to the latest firmware via the stock update app. I still haven't found a successful way to root the Power 6. There is this thread (https://www.getdroidtips.com/root-ulefone-power-6/), but the ADB commands to not work, and does not fastboot my phone to install the patched image. But either way, the instructions do not include a TWRP, so Im back to square one. HELP!

How to root Ulefone Power 6 (Build Power_6_SF1_V07) Updated 9/22/2019
OK. It was tough, but I finally found a way to root the Ulefone Power 6. I still haven't figured out a way to install TWRP, but that's because i have to build a custom recovery, and that's too advanced for me. So, anyone is welcomed to help out with building a custom recovery for TWRP. As for the root, This is what you will need:
Pre-Requirements:
Device battery charged up to 50%.
Developer Options enabled with OEM Unlocking and USB Debugging enabled
Remember to take a full backup of device data (Internal Storage, SMS), it will get formatted.
A Windows or Mac PC/Laptop is necessary to flash Magisk
A USB cable to connect your device with your PC
Download Links:
Download Minimal ADB Fastboot 1.4.3 (Portable). Extract it to your desktop.
It's best to give administrator privileges to the tools before you use them. To give them admin privileges:
Right click on adb.exe and select "Properties" at the bottom of the menu. Click on the "Compatability" Tab and check the "Run this program as an Administrator" box. Click on the "Apply" button and then the "OK" button to close the properties window.
Repeat the same process for the "cmd-here.exe" and the "fastboot.exe" files.
Ulefone USB Drivers. Extract it to your desktop and make sure you install the drivers.
MTK USB Drivers. Extract it to your desktop and make sure you install the drivers.
Latest Ulefone Power 6 Stock ROM. Or you could make a back up yourself. (latest rom as of 2/25/20 is GQ3081SF1_M860B1_Ulefone_20190921_V07(Non-EU) ).Extract it to your desktop.
MTK SP Multi Port Download Tool. This will be used to flash the most recent Ulefone rom on your device. Extract it to your desktop.
Download Magisk Manager
After downloading the Stock ROM (will be a .ZIP file), extract it to your PC.
Connect your device via USB cable
Find the "boot.img" file inside the Stock Rom folder you just extracted and copy only the "boot.img" file to your devices storage.
Copy Magisk Manager.apk to your devices storage
Using your device, install Magisk Manager
Open the Magisk Manager on your device.
Select "Install" from the first option next to "Magisk is not installed" and again select install.
Now, tap on "Select and Patch a File".
Go to your devices storage where you have copied the "boot.img" file earlier and select it.
Magisk will start patching the boot image.
Once the boot image is patched, Magisk will save the image on your "Download" folder located on your devices storage.
Locate the patched image (magisk_patched.img) and copy the "magisk_patched.img" to your PC. Make sure the patched image (magisk_patched.img) is inside the same folder as the extracted ADB and Fastboot tool folder on your desktop.
Open/run MTK SP Multi Port Download Tool
Click on File from the Menu located at the top right and select "Open Download Agent File"
Locate and select "MTK_ALLInOne_DA.bin", located in the same folder as the MTK SP Multi Port Download Tool folder.
Press the "Open buton" to select the file and close the window.
Now, click on the "Scatter File" button located at the top left.
Locate and select the XXXXXXXX_scatter.txt file located inside the extracted Ulefone Power 6 Stock Rom folder.
Press the "Open buton" to select the file and close the window.
Now, tick the "BootRom+PreLoader COM Sel All" check box located under the "scatter file" button.
Now, Click on the "Scan" button located at the bottom right.
Select Yes from the pop up window
Now, power off you device and disconnect your device from your PC by removing the USB cable from your device.
Now, reconnect the USB cable to your device while it is powered off.
MTK SP Multi Port Download Tool should detect your device and a green bar should appear confirming the connection with the words "Scan Success!" to the left of the green bar.
Press the "Stop all" button located at the bottom right
Disconnect and reconnect your device from your PC
Uncheck the "BootRom+PreLoader COM Sel All" box and check only the line with the green bar.
Click on the tiny "Start" button located to the right of the green bar.
You can confirm the flash was successful when the words "PASS" is visible to the right of the tiny "Start" & "Stop" buttons
Once the flashing is complete, you can close MTK SP Multi Port Download Tool and power on your device.
Configure your device to get to the home screen (skipping as many options as you can. You will have to format one more time) and enable Developer Options, OEM Unlocking and USB Debugging again.
Make sure your device is connected to your PC.
Now, you need to open up a command window (cmd window) inside the Minimal ADB Fastboot 1.4.3 (Portable) folder. To do this, open the "cmd-here.exe" file.
Next, enter the following command in the cmd window:
adb devices
(this command will confirm your device is connected to your PC via ADB )
Your device will show a pop up window asking for permission to connect via ADB. Click on the "Always Trust This Device" and Accept the connection
If successful, you should see the word "Device" to the right of your devices name on the list that the cmd window created.
Next, enter the following command:
adb reboot-bootloader
(This command will boot your device into fastboot/bootloader mode. It will turn off and the device will have a black lit screen)
Check that your device is connected to your pc by entering the following command:
fastboot devices
(this command will confirm your device is connected to your PC via fastboot/bootloader mode ) If successful, you should see the word "Device" to the right of your devices name on the list that the cmd window created.
Next, enter the following command:
fastboot flashing unlock
(if nothing happens, press the Volume up+ on your phone to start the unlocking of the bootloader)
(this will unlock your bootloader)
Next, enter the following command:
fastboot getvar unlocked
(this will confirm you have unlocked your bootloader. It will say "unlocked: yes")
Next, enter the following command:
fastboot flash boot magisk_patched.img
(This will replace your stock image with the patched image you created using Magisk Manager)
Next, enter the following command to reboot your phone:
fastboot reboot
Install magisk manager using your file manager. Make sure to follow directions when it asks you to give special permissions to install.
Open Magisk Manager and click on "OK" when it starts up and asks you for "additional setup".
Congratulations! Your device is rooted.
Extra notes:
If you come across a red watermark with the Chinese words and "Tee Keys" and/or "Google Keys" on the top right of your devices screen, this is how you fix it.
make sure your device is turned on and connected to your PC.
Open "cmd-here.exe" located in the Minimal ADB Fastboot 1.4.3 (Portable) folder.
Next, enter the following command:
adb shell pm uninstall -k --user 0 com.mediatek.factorymode
(This command will not do anything at the moment, but will remove the watermark after you reboot your device)
Next, enter the following command to reboot your device:
adb reboot
The watermark should be removed when your device restarts again.
ENJOY!

19Henry83 said:
OK. It was tough, but I finally found a way to root the Ulefone Power 6. I still haven't figured out a way to install TWRP, but that's because i have to build a custom recovery, and that's too advanced for me. So, anyone is welcomed to help out with building a custom recovery for TWRP. As for the root, This is what you will need:
. . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . .
ENJOY!
Click to expand...
Click to collapse
Thanks a heap for all these instructions, would not have been able to do this without them.
Just a few extra pieces of information for anyone else caryring out the above steps:
- If you your stock ROM doesn't have a file manager in order to open/execute the MagiskManager APK file then using Chrome to download the APK file will allow you to execute it.
- in the SP Multi Port Tool, after checking the line with the green bar and clicking start you'll notice the time in seconds counting next to the start button. At this point you may need to unplug your USB cable and replug it in order for the SP Multi Port Tool to detect the devices and actually start properly
- If the SP Multi Port Tool requires a checksum.ini file you can follow the instructions on the hovatek site (Google 'checksum.ini generatemediatek hovatek' I'm a new user so can't post links):
Note there is a download link for the CheckSum_Gen.zip file which will require you to register for an account on the hovatek website. You can create a junk/throw away account with a fake email as it doesn't require email confirmation. Also all of the files inside the CheckSum_Gen.zip folder need to be placed inside of the stock ROM folder where the scatter file is located.
- The watermark can only be removed after the MagiskManager carries out its additional setup and after root access is complete.

Still hoping to find a compatible TWRP recovery. If anyone builds one please let us know!

Hi, 19Henry83
I did try your method and it works great. I rooted my Power 6. The thing is I did this in hope to fix a freezing touchscreen issue. Touch screen frezzes and I need to lock/unlock my phone constantly to fix it. Now I'm convinced this is not a software issue and I will return the phone to the seller. So I wanted to get back to the original firmware. When I do that however there is still that red watermark and my IMEI is deleted. Is there any way to get back to the factory software and not have the red watermark, as I assume it will void my warranty.

I Need help please ,, I need the TWRP Recovery, Tool / Utility for the Ulefone Power 6, I have looked for it in many web pages and I cannot find it, all the ones I find have the same name "3.3.1 Power 6" and not It works for me when I install them, I get the same recovery that I had when I try to enter

jiroscop said:
Hi, 19Henry83
I did try your method and it works great. I rooted my Power 6. The thing is I did this in hope to fix a freezing touchscreen issue. Touch screen frezzes and I need to lock/unlock my phone constantly to fix it. Now I'm convinced this is not a software issue and I will return the phone to the seller. So I wanted to get back to the original firmware. When I do that however there is still that red watermark and my IMEI is deleted. Is there any way to get back to the factory software and not have the red watermark, as I assume it will void my warranty.
Click to expand...
Click to collapse
Hello Jiroscop. I had the same problem and only noticed after i read your post. Now, a couple months later, i managed to use an IMEI changer to insert my IMEI found on my original box where my phone came in. It should have two IMEIs. I don't know if i can explain on this forum. Try researching it on your own and get back to me if you cannot find a way to fix your phone.
NOTE: you will need your original IMEI's, changing the IMEI's with anything other than the original ones will brick your phone.