http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
problem loading
i downloaded the version micro_sim_s3_quadcore_dualcore_firmware_20130107 and when i try to flash it with sp flash tool i get the error that the phone is mtk6577 and the file is for 6575.Look the photo i have attached and let me know.
Do i do something wrong?
Beer Brand said:
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
Click to expand...
Click to collapse
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Beer Brand said:
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
Do you mean the one called ''micro_sim_s3_quadcore_dualcore_firmware_20130107'' ?
I tried to flash with sp flash tool but i get error!Not compatible!When it flashes i get error ''the target platform is 6577s00''
I cant load it!
Why do you mean by saying universal?
https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
try this link this goes to all mtk657x chipsets.
Sent from my Nokia 5110 using Tapsilog and Kape
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
soulfreem said:
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
Click to expand...
Click to collapse
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
s3 clone
can this fix my s3 clone mtk6577?
Beer Brand said:
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
Click to expand...
Click to collapse
Is the link the same for the quadcore and dualcore?
Thank you for your help
zeldaaxe1 said:
can this fix my s3 clone mtk6577?
Click to expand...
Click to collapse
i also have issue with my s3 clone mtk6577... its no longer turning on after trying to odex it.. tried to flash the firmware and thats when the phone no longer turning on.. please help me.. im trying to flash it again using the flash tool but stuck in 0% what do i need to do?
I have the same problem. S3 micro sim clone MTK6589, new firmware tried (chinaecarts.com/s3firmware20130320.rar ), then the phone not booting.
I just contacted with Chinaecarts.com, they tried to solve the problem but not working.
Also tried with the universal firmware, but it sad I've MTK6577 phone, not MTK6575.
If I will have fresh news, will post it.
(seller said, I should send the phone back, and they will fix it.)
I tried with this:
H.tps://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
It is theoretically for the MTK6577 and MTK6589 as well. Got the previous result: "Platform error. The target platform is MT6577_S00."
I think there is a solution for the blank screen problem:
- need a Flash Tool. (on the link above you can find it, or on the link in my previous post)
- need a firmware for MTK6577 micro sim card.
I tried with many sdcard firmware versions, but no effective result.
Hi,
1, You need to know what is exact model of your s3 mtk6577. There are many s3 mtk6577 models in the market. Different s3 mtk6577 is made by different manufacturer, so the ROM is definitely different.
2. After you get the right ROM, then flash your phone by using flash tool SPMultiPortFlashDownloadProject
Bricked MTK6577
The image of the S3-micro-sim-version-20121210 this with corronpidos files, and the method that you should have done to retrieve your appliance was using the recover instead of SP tools because the files are not in rar. SP standard my phone so can enter META mode and nothing more.
soulfreem said:
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
Click to expand...
Click to collapse
It looks I have the exact model of yours. I am trying to update the firmware by entering the recovery (I suppose it is {vol up + power}). But my external sdcard is not mounted to pick the rom from.
I hope this may help you? I had the same problems as you with the same phone after rooting it I deleted the original rom as it went into a loop and would not start so I started installing every firmware I can find and install, I got one which works BUT! no English , it boots English then goes into several languages but not English it is HDCI9300 rom. I googled it as no one seems able or do not want to help although I have asked several times in many different ways. I hope this will get your phone at least to boot up, I used sp flash as this rom will not let you do anything with the sd card (if it does you need to translate one of the languages)? I hope this helps, if not you have lost nothing:fingers-crossed:
Hello. I have a similar problem with yours. A friend of mine has a 100% visual clone (MTK6577) with the same sticker under the battery like in the first post, he tried to flash it, but he messed up something, and then he brought it to me completely DEAD . No charging, no PC connection - nothing... I tried many button combos, and accidentally i found out that if i connect the phone without battery, press and hold VOL+, VOL- & POWER for a few seconds, the PC detected the mediatek com port , installed the drivers without problem, and now the real problems begins - the ROM. I tried all of the roms from chinaecarts but without success, first i couldn't flash the thing, and after downloading several roms from chinaecarts, and finally flashed it and guess what - no LCD :silly: . So i tried combining different files from different roms, and now i'm at a point where i can turn on the phone, screen goes white, but the phone boots, it makes the vibration after the boot process completes, and after that the phone is responding to touches (it vibrates), lock/unlock works, PC detects USB Mass Storage Device, USB Composite Device and MTK65xx Android Phone. I also noticed that in the FW packages i downloaded there are some files that aren't flashed (i think) like for example the kernel.img so i was wondering if i can flash it manually? Please someone help, share some FW links, i can't find anymore...
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
help please!
brad_maliik said:
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
Click to expand...
Click to collapse
Try this (remove spaces): https:// hotfile.com/dl/207667730 /e94a926/6577_9300_650.zip. html
Hello,
I just bought a Lenovo K3 Note. It arrived with chinese stock rom. I tried it for about 10 minutes and everything was working fine. I decided to flash ROW (Indian stock) rom but after flashing rom with sp flash tool the phone screen only shows black and white lines. When turned on the phone vibrates and makes starting sound but nothing meaningful on screen. It looks like a hardware problem or display driver problem but it happenned after flashing rom. I tried flashing different roms but the result is the same everytime. What should I do?
Note: I cannot put an image here showing the problem because Xda doesn't allow external link.
melihtas said:
Hello,
I just bought a Lenovo K3 Note. It arrived with chinese stock rom. I tried it for about 10 minutes and everything was working fine. I decided to flash ROW (Indian stock) rom but after flashing rom with sp flash tool the phone screen only shows black and white lines. When turned on the phone vibrates and makes starting sound but nothing meaningful on screen. It looks like a hardware problem or display driver problem but it happenned after flashing rom. I tried flashing different roms but the result is the same everytime. What should I do?
Note: I cannot put an image here showing the problem because Xda doesn't allow external link.
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Please post your question here:
http://forum.xda-developers.com/showthread.php?t=2257421
You'll find expert advice there.
Good luck!
Thread closed.
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Hi there, nice to meet you!
please got a little problem here. i got a samsung tablet SM-T311 clone. china
Mtk 6582 chip, running on android 4.2..2 jelly bean.
tablet got bricked. when i tried to flash using sp flash tool.
its because i haven't got the real rom for the device, i have tried about 4 different roms, while loading and flashing it direct
from the scatter file on sp flash tool. but amongst the 4 roms, only one can even light the screen, charge the tablet, but shows half
battery on screen when turn off and charging. and screen got 2 colors when power on, yellow half way up, and white half way down. i'm sure its because rom is not for it. please need help! tablet can only be flash with sp flash cos it got dark screen.
please HELP!!!
5kstore said:
Hi there, nice to meet you!
please got a little problem here. i got a samsung tablet SM-T311 clone. china
Mtk 6582 chip, running on android 4.2..2 jelly bean.
tablet got bricked. when i tried to flash using sp flash tool.
its because i haven't got the real rom for the device, i have tried about 4 different roms, while loading and flashing it direct
from the scatter file on sp flash tool. but amongst the 4 roms, only one can even light the screen, charge the tablet, but shows half
battery on screen when turn off and charging. and screen got 2 colors when power on, yellow half way up, and white half way down. i'm sure its because rom is not for it. please need help! tablet can only be flash with sp flash cos it got dark screen.
please HELP!!!
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question here:
http://forum.xda-developers.com/android/help
You'll receive expert advice there.
Good luck!