I've been running Stock Rom (4.1.1) with Bullet_proof_kernel and TWRP (instead of stock kernel and stock recovery),Recently I was notified on an update to 4.2.2 via OTA. And when I was asked for installing the update package after downloading (424 MB),it simply goes into TWRP,and nothing happens. I tried flashing it through twrp but it doesn't work(I get some errors on it). What if,I flash Stock kernel and stock recovery and then try updating it??If that's possible,Can anyone provide me with a link for downloading them? It would also be great if you suggest an alternate way to update it to 4.2.2 [stock].
Thanks in advance!!
As I've told at least 3 other people in the last couple days: OTAs require stock recovery to install.
Also, I think your bootloader will need to be relocked if you are S-on.
If you are already bootloader unlocked and custom recovery, just install one of the stock (or stockish) Sense 5 ROMs posted in Development. Flash like any other custom ROM.
redpoint73 said:
As I've told at least 3 other people in the last couple days: OTAs require stock recovery to install.
Also, I think your bootloader will need to be relocked if you are S-on.
If you are already bootloader unlocked and custom recovery, just install one of the stock (or stockish) Sense 5 ROMs posted in Development. Flash like any other custom ROM.
Click to expand...
Click to collapse
Yeah,I tried them but It did'nt work..Getting the same error in it.(Error executing update binary in zip). And I have S off with unlocked bootloader..Can you provide me with the link of stock recovery?
Akil97 said:
Yeah,I tried them but It did'nt work..Getting the same error in it.(Error executing update binary in zip). And I have S off with unlocked bootloader..Can you provide me with the link of stock recovery?
Click to expand...
Click to collapse
What version of TWRP?
Going back to stock recovery has been asked so many times, I'm not going to bother answering. Try reading or doing a search.
redpoint73 said:
What version of TWRP?
Going back to stock recovery has been asked so many times, I'm not going to bother answering. Try reading or doing a search.
Click to expand...
Click to collapse
TWRP 2.5.0.0.And I was trying for it for hours and couldn't find anything on reverting to stock recovery..I downloaded a ROM [stock] Sense 5 4.2.2
and even tried flashing it through recovery but it throws me the same error..
Akil97 said:
TWRP 2.5.0.0.And I was trying for it for hours and couldn't find anything on reverting to stock recovery..I downloaded a ROM [stock] Sense 5 4.2.2
and even tried flashing it through recovery but it throws me the same error..
Click to expand...
Click to collapse
Its been discussed here countless times that TWRP 2.5.0.0 is buggy, and many ROMs will not install with it. Update to 2.6.0.0.
This is probably your main issue. Returning to stock recovery is a poor remedy.
redpoint73 said:
Its been discussed here countless times that TWRP 2.5.0.0 is buggy, and many ROMs will not install with it. Update to 2.6.0.0.
This is probably your main issue. Returning to stock recovery is a poor remedy.
Click to expand...
Click to collapse
I couldn't download TERP 2.6 and hence I tried CWM (Philz recovery ) too..still It didn't work ..
Akil97 said:
I couldn't download TERP 2.6 and hence I tried CWM (Philz recovery ) too..still It didn't work ..
Click to expand...
Click to collapse
Try downloading GooManager from the Play Market, and update TWRP that way.
I've tried CWM before, but only the official version, not Philz, so I can't comment on that.
redpoint73 said:
Try downloading GooManager from the Play Market, and update TWRP that way.
I've tried CWM before, but only the official version, not Philz, so I can't comment on that.
Click to expand...
Click to collapse
Finalllyy!! 4.2.2 Works!! Thanks bro!
Akil97 said:
Finalllyy!! 4.2.2 Works!! Thanks bro!
Click to expand...
Click to collapse
You're welcome. Any case where I help somebody stay modded instead of going back to stock, is a "win" in my book!
Akil97 said:
Finalllyy!! 4.2.2 Works!! Thanks bro!
Click to expand...
Click to collapse
whats your cid man ?
i need known your cid to try update to 4.2.2
thanks
mohamadice said:
whats your cid man ?
i need known your cid to try update to 4.2.2
thanks
Click to expand...
Click to collapse
Who is your carrier
Sent from my VENOMized HoxL
Related
Hi,
I have nexus s 9023 and trying to manually install JB, I get the annoying error 7 (apply_patch_check).
I have STOCK 4.0.4 but the bootloader is unlocked, i have root and a different kernel.
I read a lot of threads about this problem but I understood that having the CWM recovery should prevent the problem,
but unfortunatly I still get it.
Does anybody knows what should I do in order to fix this and get the JB update?
Thanks!
danagu said:
Hi,
I have nexus s 9023 and trying to manually install JB, I get the annoying error 7 (apply_patch_check).
I have STOCK 4.0.4 but the bootloader is unlocked, i have root and a different kernel.
I read a lot of threads about this problem but I understood that having the CWM recovery should prevent the problem,
but unfortunatly I still get it.
Does anybody knows what should I do in order to fix this and get the JB update?
Thanks!
Click to expand...
Click to collapse
Are you using cwm to flash the ota update?
fung9 said:
Are you using cwm to flash the ota update?
Click to expand...
Click to collapse
yes, i have the update zip file.
danagu said:
yes, i have the update zip file.
Click to expand...
Click to collapse
flash CWM 6.0.1
flash stock kernel
which file gave you this error?? replace it with stock version
I finally suceeded using this guide:
http://techie-buzz.com/android/manually-install-jelly-bean-update-on-nexus-s.html
(apperantly I had wrong files)
Thank you all!
Hi Guys,
I've been using Paranoid Android for some time now and love it. I have just downloaded the latest version, performed Dragun's wipe script and when trying to install, I keep getting an error stating a status 7, some symlinks failed. I have tried re-downloading the rom, plus a previous version as well as full wiping everything and factory reset to no avail. Has anyone had this issue? Can anyone help?
I have just tried to install another rom to get past this for now, however it appears the phone is now stuck on the loading screen... Any help would be appreciated.
I would post in the development thread for the rom, however as I haven't posted before, I don't have sufficient permissions.
Cheers,
Mike
Mikeparakh said:
Hi Guys,
I've been using Paranoid Android for some time now and love it. I have just downloaded the latest version, performed Dragun's wipe script and when trying to install, I keep getting an error stating a status 7, some symlinks failed. I have tried re-downloading the rom, plus a previous version as well as full wiping everything and factory reset to no avail. Has anyone had this issue? Can anyone help?
I have just tried to install another rom to get past this for now, however it appears the phone is now stuck on the loading screen... Any help would be appreciated.
I would post in the development thread for the rom, however as I haven't posted before, I don't have sufficient permissions.
Cheers,
Mike
Click to expand...
Click to collapse
are you S-ON or S-OFF?
rzr86 said:
are you S-ON or S-OFF?
Click to expand...
Click to collapse
Hi
I'm S-OFF.
Mikeparakh said:
Hi
I'm S-OFF.
Click to expand...
Click to collapse
then check if you have the latest fw version
as far as i know paranoid android rom requires 3.32fw or 3.33fw
also what recovery do you have?
rzr86 said:
then check if you have the latest fw version
as far as i know paranoid android rom requires 3.32fw or 3.33fw
also what recovery do you have?
Click to expand...
Click to collapse
I'm on 3.33 and am using 4ext recovery touch. Thanks.
Mikeparakh said:
I'm on 3.33 and am using 4ext recovery touch. Thanks.
Click to expand...
Click to collapse
All fixed now thanks to the wonderful developers of PA. Thanks for your help though!
Mikeparakh said:
All fixed now thanks to the wonderful developers of PA. Thanks for your help though!
Click to expand...
Click to collapse
Can i please what steps you took to get this working again? I get same symlink error when trying to flash from CWM
midnight2065 said:
Can i please what steps you took to get this working again? I get same symlink error when trying to flash from CWM
Click to expand...
Click to collapse
flash the latest firmware if you do not have it(you have to be S-OFF)
also install 4ext recovery.it is better
Hi xda-developers team! I unlocked my att one x bootloader, istaled SU and flashed twrp recovery...
Than I downloaded some 4.2.2 roms from "One X Original Android Development" wiped cashe delvik, factory reset... flashed rom also gapps, then rebooted and screen is freezing on "HTC qiutly briliant" screen.. what to do now how to update to 4.2.2 CM10.1
crackunia said:
Hi xda-developers team! I unlocked my att one x bootloader, istaled SU and flashed twrp recovery...
Than I downloaded some 4.2.2 roms from "One X Original Android Development" wiped cashe delvik, factory reset... flashed rom also gapps, then rebooted and screen is freezing on "HTC qiutly briliant" screen.. what to do now how to update to 4.2.2 CM10.1
Click to expand...
Click to collapse
easiest way is to just get s off http://forum.xda-developers.com/showthread.php?t=2155071
s1l3nt said:
easiest way is to just get s off http://forum.xda-developers.com/showthread.php?t=2155071
Click to expand...
Click to collapse
so what when phone will be S-OFF? what to do then what roms can I instal?
links not working in this thread...
d-h.st/ server not working.. are there any mirror links?
crackunia said:
d-h.st/ server not working.. are there any mirror links?
Click to expand...
Click to collapse
Just checked, and the links are working. Also, that thread does have mirror links right next to the d-h.st ones.
watameron said:
Just checked, and the links are working. Also, that thread does have mirror links right next to the d-h.st ones.
Click to expand...
Click to collapse
OK I'll S-off but what then?
my phone is freeze...
crackunia said:
OK I'll S-off but what then?
my phone is freeze...
Click to expand...
Click to collapse
No need to s-off. I'm not. You probably need to flash the boot.img from the rom zip. What rom are you going with? Jellybam has worked well for me.
if your on hbot 2.20 you also need to downgrade your touchpanel firmware to 1.20 or else the screen wont work.
yeah it sounds like you didnt flash the boot.img. you need to pull the boot.img out of the rom you are flashing and flash it in fastboot. command is fastboot flash boot boot.img
So today I saw that the 12.1 update is downloaded and asking me to install it. But, when I do try installing it the screen is stuck at the Cyanogen Recovery.
The usual options in recovery screen are displayed, why isn't the OS updating?
FYI - My OPO is rooted and also has TWRP recovery installed. I also tried disabling the Update Cyanogen Recovery option but the same option.
Any assistance would be great
SagarRox said:
So today I saw that the 12.1 update is downloaded and asking me to install it. But, when I do try installing it the screen is stuck at the Cyanogen Recovery.
The usual options in recovery screen are displayed, why isn't the OS updating?
FYI - My OPO is rooted and also has TWRP recovery installed. I also tried disabling the Update Cyanogen Recovery option but the same option.
Any assistance would be great
Click to expand...
Click to collapse
You can't flash the OTA with TWRP recovery. You can either flash the stock recovery and then install the OTA, or you can download the full ROM zip and flash that with TWRP.
Heisenberg said:
You can't flash the OTA with TWRP recovery. You can either flash the stock recovery and then install the OTA, or you can download the full ROM zip and flash that with TWRP.
Click to expand...
Click to collapse
Heisen
Sorry, a little question (and sorry to the OP)
Ive try to install the ota manually (i was rooted with twrp) flashing back the cm recovery, but it doesnt work still.
So ive flash the twrp 2.8.6 (for the baseband not installing prolems) and downloaded the full rom file, flashed in twrp without any wipes... Its all ok now, should i have problems with this method?
The baseband is 241,is correct?
Thx for helping
L.
lollaz said:
Heisen
Sorry, a little question (and sorry to the OP)
Ive try to install the ota manually (i was rooted with twrp) flashing back the cm recovery, but it doesnt work still.
So ive flash the twrp 2.8.6 (for the baseband not installing prolems) and downloaded the full rom file, flashed in twrp without any wipes... Its all ok now, should i have problems with this method?
The baseband is 241,is correct?
Thx for helping
L.
Click to expand...
Click to collapse
You shouldn't have any issues.
Heisenberg said:
You shouldn't have any issues.
Click to expand...
Click to collapse
Hi,
I am facing the same issue while updating the official update. I tried updating using the Cyanogen recovery but it is giving a failed error: "Unable to open the zip file" something like this. i have downloaded the 305 Mb update again manually but of no use.
Please help on this.
TIA
Nav07 said:
Hi,
I am facing the same issue while updating the official update. I tried updating using the Cyanogen recovery but it is giving a failed error: "Unable to open the zip file" something like this. i have downloaded the 305 Mb update again manually but of no use.
Please help on this.
TIA
Click to expand...
Click to collapse
Are you currently on the build directly before this one?
Heisenberg said:
Are you currently on the build directly before this one?
Click to expand...
Click to collapse
Dear, i am frankly not a techie. I am using the stock (default) RAM only. Would be great if you can help on this
Nav07 said:
Dear, i am frankly not a techie. I am using the stock (default) RAM only. Would be great if you can help on this
Click to expand...
Click to collapse
You don't need to be a techie to know that the updates must be taken in order. Go to Settings>About Phone, take screenshots of the info there and post here so I can see please.
Heisenberg said:
You don't need to be a techie to know that the updates must be taken in order. Go to Settings>About Phone, take screenshots of the info there and post here so I can see please.
Click to expand...
Click to collapse
Currently the Cyanogen version is 12.0-YNG1TAS2I3, OS version is 5.0.2, Build number is LRX22G
Nav07 said:
Currently the Cyanogen version is 12.0-YNG1TAS2I3, OS version is 5.0.2, Build number is LRX22G
Click to expand...
Click to collapse
You're on the right version. The zip must be getting corrupt during the download or something.
Heisenberg said:
You're on the right version. The zip must be getting corrupt during the download or something.
Click to expand...
Click to collapse
I have manually downloaded the zip file again apart from the Official update but it is still not getting through
Can anything else be done on this?
Nav07 said:
I have manually downloaded the zip file again apart from the Official update but it is still not getting through
Can anything else be done on this?
Click to expand...
Click to collapse
Try downloading the full zip from here:
https://www.androidfilehost.com/?fid=24052804347802356
Flash that with recovery.
Silly question... but why won't my phone update to newest CM through OTA? ( Every time my phone goes to recovery, it wont start the update process. )
As far as I know it's stock CM, rooted, but I have TWRP recovery.
I have to install the latest CM update through flashable zip file as a workaround. but if I want to sell my phone, I don't think most people know how to do that.
I believe you need the stock recovery for that to work.
Sent from my one+ running RR
Hm... do you know where I can download the stock ( CM ) recovery?
Roxy said:
Hm... do you know where I can download the stock ( CM ) recovery?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B98G0KTJwnBFNzBFd2pRMmhvUmc/view?usp=docslist_api
Heisenberg said:
https://drive.google.com/file/d/0B98G0KTJwnBFNzBFd2pRMmhvUmc/view?usp=docslist_api
Click to expand...
Click to collapse
Thank you! Hopefully this will fix the OTA issue.