GS3 Bricked - Please help! - Verizon Samsung Galaxy S III

Hi,
I'm new to this site and just bricked my white 16 gb verizon galaxy s3 sch-i535 :crying: I was running touchwiz and decided to run cyanogen 10.2, I had to install a bootchain to unlock the boot. Downloaded RomManager and was using CWM 6.x.x, went to install it, rebooted into recovery and it started going through the system update, it finished and was about to install gapps when the device turned off and has not been able to turn back on since my computer won't recognize it, i plug it in and it makes a sound and tries to download the drivers, then it just stops and won't be recgonized. tried booting into recovery/download mode, nothing. I left it and used my old gs3 for about 4 days, tried plugging it into the charger, light turned red for about a minute and I thought I was saved, but then it turned off and nothing. Is this completely dead? Does any one know how to fix this? Any help is appreciated. Thanks!

Samsung is now offering free repair of brickes phones. You can try that?
Sent from my LG-P990 using xda app-developers app

With a good battery boot into recovery using the three finger method volume+ and home and power buttons. Hold it until recover boots.
Sent from my SCH-I535 using Tapatalk 4

Related

[Q] Fix brick? (failed theme update)

I tried to install an update on my Galaxy S 4G to my Gingerbread theme on KD1 and I can't get past the original boot screen.....is there any way to boot into CWM? I installed it, except i can't seem to boot into recovery.
Any ideas?
I'd like to use ODIN as a last resort (and yes, download mode does work.)
If it doesn't boot pass the Samsung screen then you'll have to use Odin to fix. I had a similar issue this week with thay
Sent from my SGH-T959V using XDA App
I have the same issue but mine is a little more severe. I don't even get a boot screen. Nothing displays. I tried doing many variations to get into download mode but I cannot. So I'm stuck with a blank screen Odin doesn't recognize it my computer doesn't even recognize it. Please Help!!!
pepuhz said:
I have the same issue but mine is a little more severe. I don't even get a boot screen. Nothing displays. I tried doing many variations to get into download mode but I cannot. So I'm stuck with a blank screen Odin doesn't recognize it my computer doesn't even recognize it. Please Help!!!
Click to expand...
Click to collapse
Pull out your battery. With your phone unplugged put your battery in but leave it powered off.
Plug your phones cord in your PC. Just the cord not the phone.
Now hold just the volume up and down buttons. While holding the buttons in plug that cord from your PC into your phone. You will see a yellow triangle or if your firmware is messed a symbol with a small phone and a computer. You can use Odin either way. You will see Odin recognize the phone if its done correct and you have the Samsung usb drivers installed.
Sent from my SGH-T959V using XDA Premium App
I know I have to be doing something wrong. I have read everything everywhere and have a Samsung Galaxy S 4G & Vibrant 3G T959 BOTH stuck in recovery. Haven't touched them in about a week buttons just checked & still they go through the load to the TMO chime then black or I can get to download & recovery but have mounting issues. The Vibrant was rooted & SGS lost root when flashing joedevelopers rom (placing no blame on thread just providing information for possible help).
I read somewhere yesterday about using NVFash or SuperOneClick to get it going but each search leads me to instructions for other devices. I don't want brick either phone using the wrong files so I'm pretty much stuck.
Would appreciate instructions if anyone has the answer. I really have tried everything. The SGS was stuck at the phone ! computer screen shot first but the reloading the drivers and piecing together some code brought it back & now the SD card is not ready.
Sent from my Bionix 2 - A TeamWhiskey Production using XDA Premium App

[Q] LG screen loop

First, my G2X will run the lg screen for about 5 seconds then the screen just keeps flashing. Tried to master reboot and the screen wit the little android guy jumping out of the box appears but soon disappears to a blank screen. I've tried to NVFlash but it won't work. I'll hold down the power and volume down button but it just keeps looping over and over again at the lg screen and my computer won't recognize it at all. I done countless hours of research but I really need help. Maybe I'm just dumb or something but I just need help. I can't return to tmobile because the screen cracked like a week ago thus voiding my warranty.
I'm guessing that you tried to root your phone using oneclick? Try nvflash again! Make sure you install the apx drivers correctly. It should work. Did you try to root the phone or was it rooted already?
Sent from my LG-P999 using XDA
I had it rooted and a buddy of mine was gonna install a custom rom on my phone for me and he just fake flashed it using cwm app and before i even realized what he was doing, BOOM he went to install the rom using the app and my phone won't get past the LG screen. The apx drivers won't install because my computer won't detect an apx device
Ahh I see. When you first rooted did you backup your rom? Can you boot into stock recovery? Hold power and volume down until you see the little guy with white box?
Sent from my LG-P999 using XDA
Well I'll try and the Android guy comes up but after 5 seconds the screen blanks out and just
flashes
http://forum.xda-developers.com/showthread.php?p=13280029
Try this, the apx drivers are there
Try flashing nvflash again. This phone can't be bricked so there is a way.
Sent from my LG-P999 using XDA
I've tried those too... Could it be that I have vista?
Alkalin3Trio said:
I've tried those too... Could it be that I have vista?
Click to expand...
Click to collapse
try hold down volume button for 5 to 10seconds after boot while turning it on. (or both volume buttons and than turn it) it will reset your device and you should b able to boot..it happened to me when i tried to flash it with rom manager but fixed it..

[Q] Phone won't boot into ROM or recovery--Possible hardware issue?

I've been having a bit of a hard time with a friend's Skyrocket tonight. I flashed CM9 for her before, and it seems to work well. In the past two to three weeks, though, she tells me that her phone's been randomly turning off. Tonight, I finally decided to install CM10 on the Skyrocket, thinking that this would fix the issue. I installed it through CWM like normal (I've flashed many a ROM, so I couldn't have messed up this process).
With everything installed, I reboot through CWM. The issue is, the phone just goes black. After pulling the battery and trying to boot again, I see the Samsung logo, followed by a black screen. The phone sort of pulsates for a bit at this point, giving me a short vibration here and there, before finally stopping. Attempting to get into recovery doesn't work either. I also, due to me not being used to the download mode feature (I personally have a Galaxy Nexus), accidentally tried to start it by holding the power and volume buttons (rather than holding volume and plugging the phone in, not touching power). The yellow triangle would show up very briefly, and then the phone shuts off.
When getting into download mode the proper way, I was able to get into Odin and flash CWM again. At this point, I should definitely be able to get into Recovery. But alas, I cannot... Same issues as before. At this point, it's revealed to me that, after the random shutoffs that my friend had been experiencing, she would sometimes also have trouble turning the phone back on. Noticing a trend?
I'd like to know what you guys think: Is this a software issue, or is it a hardware issue? For the former, what do you guys recommend so the phone could boot normally again? And for the latter, well... I don't suppose there are any easy hardware fixes I could try?
If you pull the battery and reinsert does the phone start on its own with no button pushes? If so... Stuck power button.
Sent from my SAMSUNG-SGH-I727 using xda premium
stoopendis said:
If you pull the battery and reinsert does the phone start on its own with no button pushes? If so... Stuck power button.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Nope, not at all. I need to press the power button for it to start.
It'd flash back to stock with Odin and then go from there.
Sent from my SGH-I727 using xda app-developers app
jd1639 said:
It'd flash back to stock with Odin and then go from there.
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I'm embarrassed to say that I didn't try flashing to stock because I figured it would work, but somehow, it did. I still feel that there's something wrong with the power button, and I'll be doing some more testing, but for now, everything's okay. Thanks for your help.
I bet you can reflash cm10 and it'll work fine. Just do a factory reset and the wipes and you'll be fine.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Wipe ALL the things, then Odin back to stock and reinstall. I'd bet that solves it
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Mightve bricked my P5113

Hi, i tried updating my tab to the leaked 4.1 OTA and after following the instructions my tab wont boot. It will only play the boot animation then hang at the samsung logo for about ten minutes then go black. I cant get it into download or recovery mode, but when i plug it into the wall it shows the battery icon. Also odin recognises the tab while its hanging at the samsung logo.. i have heard talk of a usb jig but not for this tablet.. Can anyone offer any advice? thanks in advance
If Odin sees it a USB jig isn't needed.. Just flash the stock f/w tar and you're good
EDIT: fail... No download mode... Umm... Sounds like you're in a bootloop... No idea why recovery and download wouldnt work tho...
Sent from my XT907 using Tapatalk 2
HulianMango said:
Hi, i tried updating my tab to the leaked 4.1 OTA and after following the instructions my tab wont boot. It will only play the boot animation then hang at the samsung logo for about ten minutes then go black. I cant get it into download or recovery mode, but when i plug it into the wall it shows the battery icon. Also odin recognises the tab while its hanging at the samsung logo.. i have heard talk of a usb jig but not for this tablet.. Can anyone offer any advice? thanks in advance
Click to expand...
Click to collapse
The good news is that the device probably isn't bricked. If it was unfixably bricked you shouldn't even see the boot animation.
It's figuring out how to fix it that's the hard part.
What you've clearly done as far as the ROM though is installed the rom improperly somehow. Might have missed as step in the process, or the ROM could have just been a bad download and no fault of your own. These things happen to the best of us.
Assuming that clockworkmod recovery is still installed, and you just can't get into it, you might try to see if you can access it using adb from your computer.
If you have abd installed boot the device as far as it'll go then see if you can connect to it with adb and run this command...
abd reboot recovery
Also try
adb reboot boot loader
If you don't have adb installed read this...
http://forum.xda-developers.com/showthread.php?t=1853159
If that doesn't work (and I only give it a 50-50 shot at best as adb isn't always useful during the boot process, which is where you are stuck....then we'll think of something else.
Also please describe the steps you are using to try and get into recovery just to make sure you're trying it the right way.
And after it gets stuck at the Samsung screen are you turning it off completely by holding the power, volume up, and volume down all at once? That should shut the device off completely, which is where you need to be before trying to boot into recovery.
Thank you both! ! I managed to get it going
Sent from my GT-P5113 using xda app-developers app
HulianMango said:
Thank you both! ! I managed to get it going
Sent from my GT-P5113 using xda app-developers app
Click to expand...
Click to collapse
Please share how you got it fixed and what ended up working.
That way when someone else Google's the same probelm a year from now and finds this thread, he'll have the answer waiting for him. (See my signature cartoon from XKDC.com for a comical represensation of why not explaining what the outcome was is annoying)
Glad it got working!
Well i asked in the thread for that rom and it was suggested that the battery needed charging, I didnt think this was the case cuz my tab had been plugged in to the wall for about an hour already but I let it sit for a couple hours and it finally booted although it said there was 15% power left... its still charging really slow but it boots now!
Sent from my GT-P5113 using xda app-developers app

[Q] Help Phone won't turn on after trying to flash liquidsmooth

Hi,
I rooted my phone today and everything worked fine, I then went to CWrecovery to flash the liquidsmooth rom I downloaded. I selected to reboot device after a successful install but now it won't turn on, no screen, led, etc. if I plug into computer I get a contection noise from my computer but thats it. Can't boot into download mode or recovery... What can I do to fix?
thanks
Did you unlock and flash a custom bootloader?
I think so. I rooted/unlocked bootloader.
Did this: http://forum.xda-developers.com/showthread.php?t=2046439&nocache=1
For Both Root and Unlocked Bootloader ***RECOMMENDED*** - Download SuperSU + Unlocked Bootloader to your SD Card
Then tried to flash LiquidSmooth from forum.
Ryukashin said:
I think so. I rooted/unlocked bootloader.
Did this: http://forum.xda-developers.com/showthread.php?t=2046439&nocache=1
For Both Root and Unlocked Bootloader ***RECOMMENDED*** - Download SuperSU + Unlocked Bootloader to your SD Card
Then tried to flash LiquidSmooth from forum.
Click to expand...
Click to collapse
Did you wipe data factory reset prior to flashing the rom?
Sent from my SCH-I535 using xda app-developers app
no i didn't
If you forgot to wipe the phone would still attempt to boot. It just might send you into a bootloop
Anthrax unreleased towchwiz
Yeah except I can't get it to boot at all. No response to turning on, pulled battery, waited 30 minutes, then tried to boot again. nothing. not even the LED. now if I leave the battery out and plug the phone in to the computer the LED turns on but that's it. At the computer end I get the sound for plugging in a USB device, however it doesn't do anything else and there were no drivers for the device: QHSUSB_DLOAD.
Is it hard bricked?
Try getting into recovery by holding volume up+home button +power button at the same time. Hold it for a few seconds and it should vibrate and one the Samsung logo comes on you could let go. At this point I would either try re flashing or restore your most recent backup download another rom and try again.
Sent from my SCH-I535 using xda premium
mikeman45 said:
Try getting into recovery by holding volume up+home button +power button at the same time. Hold it for a few seconds and it should vibrate and one the Samsung logo comes on you could let go. At this point I would either try re flashing or restore your most recent backup download another rom and try again.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Tried that, as well at the Vol Down+ home+ power. Neither worked, no vibrate or screen boot.
Take your battery out for at least 5 minutes than put on the charger for awhile (couple hours) than try again. If none of this works hero had a wire up on how to fix your soft brick phone that might help. If your bootloader wasn't unlocked I'm not sure what to do to fix that. I hope you get it going. I'll post that link if I find it.
EDIT : read this post. http://forum.xda-developers.com/showthread.php?p=30386309
Sent from my SCH-I535 using xda premium
mikeman45 said:
Take your battery out for at least 5 minutes than put on the charger for awhile (couple hours) than try again. If none of this works hero had a wire up on how to fix your soft brick phone that might help. If your bootloader wasn't unlocked I'm not sure what to do to fix that. I hope you get it going. I'll post that link if I find it.
EDIT : read this post. http://forum.xda-developers.com/showthread.php?p=30386309
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
My friend had this happen (not rooted), she took it in to Verizon and they got it going by holding VOL UP and DOWN, and then POWER.
I'd never heard of this technique, but it worked for her.
Post the link and exact file name of the rom you flashed.
Sent from my SCH-I535 using xda app-developers app
I just had the same thing happen, cleanrom 5.6 and tried flashing perseus kernel when it failed, now i have this
mikeman45 said:
Take your battery out for at least 5 minutes than put on the charger for awhile (couple hours) than try again. If none of this works hero had a wire up on how to fix your soft brick phone that might help. If your bootloader wasn't unlocked I'm not sure what to do to fix that. I hope you get it going. I'll post that link if I find it.
EDIT : read this post. http://forum.xda-developers.com/showthread.php?p=30386309
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Will the liquidsmooth i9305 rom brick a i9300 device forever?

Categories

Resources