Database Info

[Q] Can't access root and Google apps

I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.

SounderBruce said:
I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
Click to expand...
Click to collapse
Ok! first download : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
just unpack, connect your device and click run.bat.....Good luck!

I ran the .bat, but I get an error saying "Device already rooted", but it is still not recognized as rooted by SuperUser.
Alternatively, is it possible to completely wipe the phone of everything (including root) so I can start over with a fresh phone?

Of course you can, and might be the best idea if you don't mind doing it.
Make sure you have the latest CWM recovery on your phone, download the FULL ROM from this thread (i'm not american so i don't know exactly, but from what i know yours is the I9020T, so get that ROM) and copy it to the SDCard. Now go into recovery, wipe system/data and dalvik cache, then flash the ROM.
Do make sure you have the right ROM though. This will get you 100% fresh and untouched 4.0.3. You can probably clear out any non-personal folders on the sdcard too, but that shouldn't do any harm anyway.
After this, use the attached file from this thread to root, and feel free to update root/superuser.

Actually, that's what I did...I can't use CWM recovery because its displaying an error of no root. So how do I wipe this or fix CWM?

Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.

Harbb said:
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Click to expand...
Click to collapse
My bootloader is apparently unlocked and I'm trying to flash through fastboot.

Are you sure the following is satisfied:
-open padlock and google logo on boot
-fastboot (on phone) says "bootloader status: unlocked" or something of the like
-you are using: "fastboot flash recovery "C:\path\to\recovery.img""
-you are using the above command while connected to the PC via USB (with working drivers) and that you are in fastboot mode on the phone (turn off phone --> hold Vol. Up then hold Power TOGETHER for about 2 seconds, should give you reboot and recovery options)
It is necessary to be in the bootloader/fastboot interface on the phone when you run the command. Hopefully it was something simple that i said above, otherwise i'm completely lost.

1. Yes
2. Yes
3. I didn't use that method to root...
4. I'll try that.

3 is just flashing recovery, that is the code u type into cmd/terminal to reflash the recovery img. It isn't rooting the phone. 4 is how to get into the mode on the phone to use the command.
Its a bit confusing at first but makes much more sense once you do it one or two times.

Where do I go to get the recovery image?

The latest ClockWorkMod Recovery can be found on this page. Just scroll down to Nexus S and download 5.0.2.0 crespo .img. Then just direct fastboot to the folder you have it saved in while using the "fastboot flash recovery C:\path\to\recovery.img" command.

Ok. I've tried this, but in command prompt, I get the following error:
C:\Users\Bruce>fastboot flash recovery C:\Users\Bruce\Downloads\recovery.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.

Check out this rooting guide, however only go up to step 5 (and do NOT type "fastboot oem unlock", do everything up until that point). This will setup fastboot for you, and setup drivers for your computer. Once this is done, do what you did above and it should work successfully.
Remember to cd (change directory) in cmd to where you unzipped that folder.

There isn't a link...

Sorry, stuffed that up. I fixed the link in my previous post pointing to NexusSHacks - How to Root Nexus S.

It's worked, but when I try to go to the recovery menu, the Google/unlocked padlock screen freezes or it displays an Android with its chest compartment open and a red triangular ! symbol.

I just had a really long reply and managed to lose it by closing the page..
That's the stock bootloader you see there, it probably didnt flash or you rebooted your phone. And make sure that you are flashing the latest CWM you downloaded before.

I flashed the latest CWM, but when I try to go to recovery, my phone freezes at the Google logo with the unlocked padlock.

Have you tried flashing it again, or maybe redownloading the file? And of course making sure it is the NEXUS S version which you are downloading.
Alternatively, try just "fastboot boot recovery.img", replacing recovery.img with the full name and path of cwm.
edit: btw, i'll be gone for an hour or two Bruce so i can answer any more questions/issues when i get back

Custom rom question.

I recently unlocked my bootloader and rooted my phone leaving s-on cos of my hboot being 2.0002 or whatever. And need a step by step to installing a custom rom with s-on. I have installed cwm recovery but cannot access it. I spent 4 hours searching on Saturday, can some kind person explain how to do it?
Sent from my HTC Desire S using XDA App

Put the ROM in SDcard. Turn off fastboot and switch your phone off. Then, hold Vol down button and without releasing it, press and hold power button. Hold till you see a white screen, You'll be in Bottloader mode. Press Vol down to highlight RECOVERY and press power to enter recovery. You'll be in CWM (if you flashed it correctly)
In CWM,
Backup your current (stock) ROM in Backup and restore > Backup. It's not necesary, but recommended, as you may want to come back later
Go to Wipe/Format
Wipe Cache
Wipe Dalvik Cache
Format System
Format Data
Wipe Data/Factory Reset
Then, go back and select Install ZIP from SD Card > Choose ZIP from SD Card and choose your ROM. The ROM is flashed.
Since you are hboot 2.00.002, you have to go through an additional step after that, you need to flash the kernel that came with the ROM, or you'll be stuck on the white HTC Screen. Extract the boot.img from the ROM and do this - http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37
Reboot. You're done

shrome99 said:
Then, go back and select Install ZIP from SD Card > Choose ZIP from SD Card and choose your ROM. The ROM is flashed.
Since you are hboot 2.00.002, you have to go through an additional step after that, you need to flash the kernel that came with the ROM, or you'll be stuck on the white HTC Screen. Extract the boot.img from the ROM and do this - http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37
Reboot. You're done
Click to expand...
Click to collapse
Excellent. Couldn't have put it better myself.

Thank you so much!
However I installed cwm recovery from the rom manager but it doesn't show up when I go into recovery, I get a red exclamation point, I press volume up and power and it says something about e something recovery not found?
Also where do I put that command? That kinda stumped me too lol. Sorry for being a noob
Sent from my HTC Desire S using XDA App

OK, first you need to setup adb and fastboot. Use this guide - http://forum.xda-developers.com/showthread.php?t=1272595
Next, get CWM recovery and instruction on how to flash it here - http://forum.xda-developers.com/showthread.php?t=1122694
You'll be flashing it via fastboot. Instructions are there in the second thread. The command will be in fastboot too, along the same lines.
Feel free to ask if you have any other doubt. Everyone is a noob at some point
Sent from my iPod touch using Tapatalk

Thank you so much. I will be doing this as soon as I can access my laptop again. Lol.
Sent from my HTC Desire S using XDA App

How'd it work out? Flashed succesfully?
Sent from my iPod touch using Tapatalk

Currently working at the other side of the country. I'll have to wait until thursday to flash it.
Thank you for the follow up though. It's very appreciated.
Sent from my HTC Desire S using XDA App

Sorted thanks guys.

Uppy said:
Hi again, i'm really sorry for being annoying but i dont get this bit.
I extracted android-win-tools to C and put the recovery image in the android-win-tools folder but what am i navigating to? c:\android-win-tools? Its specifically 4. that I'm stuck on.
This is slightly embarrassing!
this was so much easier on my Blade lol.
Click to expand...
Click to collapse
No need to be embarrassed buddy.
What point no. 4 means is that you need to move the file you want to flash (recovery.img in this case) to the folder that contains your adb files (android-win-tools, or whichever folder that you have extracted the android-win-tools that you downloaded). The rationale behind this is that when you enter the command fastboot flash recovery recovery.img, the fastboot will look for recovery.img in its default folder (android-win-tools, or whichever folder you've extracted the adb files to).
So here's what you need to do. For example, if you downloaded the adb files and extracted them to a folder named, let's say, xxxx, which is located in your C: then you need to take the recovery.img file and copy-paste it to the folder xxxx.
Before starting any of the procedures outlined here, first make sure adb can detect your device. (adb devices... sound familiar?)
Now boot phone into fastboot.
Now enter the following commands at the cmd prompt:
C:\Users\UPPY(or whatever)>cd\
Now you'll get the following:
C:\>
Next, you need to enter:
C:\>cd xxxx
You'll now get:
C:\xxxx>
Finally, enter the following:
C:\xxxx> fastboot flash recovery recovery.img
You should be done. I know the above looks over simplified... but i'm just trying to be extra nice here
I hope that clears your doubts.

Done! Thank you for all your help, you made it so much easier for me. its all up and running now.

Uppy said:
One last question though, where do i extract the boot image, do i put it in the root of my sd card and finally if thats the case what is the exact thing i type?
Click to expand...
Click to collapse
After you've flashed your custom recovery, boot into recovery and choose install from sd card, select zip from sd card, then navigate to your rom.zip file, and confirm to flash it using the recovery (on your phone)
But since you've unlocked using HTCDev, this will not flash the kernel as the boot is still locked. You have to bypass this by flashing the kernel manually using fastboot, otherwise you'll be stuck at the white HTC splash screen (Oh! how i hate that screen!!)
The kernel is contained in the boot.img.
The boot.img is contained within the zip file of the ROM you want to flash. So when you open up a ROM.zip (for example Reaper_v1.6.zip) with winrar, you'll see various files inside. Extract the one called boot.img. This is your kernel. Copy-paste this boot.img in your adb folder (like in the previous post)
To flash it, since you've already set up fastboot, just do what you did for flashing recovery.img, and follow the instructions i gave you exactly the same way, except the last part, where instead of recovery.img, you need to type:
fastboot flash boot boot.img
now type adb reboot, and boot into your shiny new custom ROM!!
You're done.

I'm getting an error when i try to connect to wi-fi, it just says error, what have I done wrong? grrr.
I think i didnt register the 3.4 boot image, will report back in a minute.
-edit- yeah i typed the command wrong thats all.

Uppy said:
Done! Thank you for all your help, you made it so much easier for me. its all up and running now.
Click to expand...
Click to collapse
Happy to help

shrome99 said:
Since you are hboot 2.00.002, you have to go through an additional step after that, you need to flash the kernel that came with the ROM, or you'll be stuck on the white HTC Screen.
Reboot. You're done
Click to expand...
Click to collapse
I have first read the install instructions from MIUI (saying: full wipe, flash rom) and now I have exactly what you have warned: Phone doesn't proceed, it ist stuck on the white HTC Screen.
UPDATE:
I was afraid of taking out the battery, as this may cause problems, and vol up + vol down + power just rebootet into white htc screen. The only way was indeed pulling the battery (after the vol up vol down power-reboot-gap). Then I could enter into the bootloader the regular way (vol down + power), and change to fastboot, and flash boot.img. Everything is fine now!!!

No-New-Phone said:
I have first read the install instructions from MIUI (saying: full wipe, flash rom) and now I have exactly what you have warned: Phone doesn't proceed, it ist stuck on the white HTC Screen.
UPDATE:
I was afraid of taking out the battery, as this may cause problems, and vol up + vol down + power just rebootet into white htc screen. The only way was indeed pulling the battery (after the vol up vol down power-reboot-gap). Then I could enter into the bootloader the regular way (vol down + power), and change to fastboot, and flash boot.img. Everything is fine now!!!
Click to expand...
Click to collapse
Was already typing a solution for you, but if you can solve a problem by yourself it's even better ;-)
Sent from my Desire S using XDA App

I'm glad this thread is helping more people than just myself. I'm not exactly a Technophobe but this was far more complicated than rooting my blade, Europa or racer or indeed writing the CSS files I used back on windows mobile 6.5 on my old touch 2.
I certainly needed my hand held through the first time doing this.
Sent from my HTC Desire S using XDA App

Rooting- error: cannot load "flashboot flash recovery r1-modaco-reco... .img"

Rooting- error: cannot load "flashboot flash recovery r1-modaco-reco... .img"
I'm rooting my HTC One S the first time. And I was stupid and thought that HTC One X Clockworkmod flash would work.
Now I know how flashing and clockworkmod installing works but before that I accidentally flashed the One X command: "fastboot flash recovery recovery-clockwork-touch-5.8.2.7-endeavoru.img" and now when I go to recovery it gives me a red text and nothing works.
I searched everywhere for a guide to remove it and did not found. So I thought I could flash it over with an One S flash, but then when I entered the command: "fastboot flash recovery r1-modaco-recovery-clockwork-touch-ville.img" It gave me this: "error: cannot load 'recovery r1-modaco-recovery-clockwork-touch-ville.img'. My phone is connected perfectly, when I type 'fastboot devices' it shows me my phone is there.
So I think this is not a big problem for developers. Can anyone tell me what to flash or do to get rid of the One X recovery? Otherwise I just have to live with a phone with unlocked Bootloader and no access to root

Do you have the IMG I the directory from which you are running fast boot?

edscholl said:
Do you have the IMG I the directory from which you are running fast boot?
Click to expand...
Click to collapse
Ofcourse

rixrasta said:
Ofcourse
Click to expand...
Click to collapse
mabey I should just do a factory reset :/

Why don't you dl goo manager from market, open it and open menu and tap on Install OpenScriptRecovery and let it install twrp--although, I guess if you aren't rooted yet that won't work
Did you try fastbooting the cwmr from here--
http://www.clockworkmod.com/rommanager
Did you check the md5 on the modaco recovery before flashing
At the red text did you try hitting vol+ or vol- not sure which one takes you to stock recovery. What does red text say--
Did you hard reboot with holding down vol- and power at same time then release pwr after screen goes off and continue to hold vol-
Not sure what is wrong, just giving some ideas--

rugmankc said:
Why don't you dl goo manager from market, open it and open menu and tap on Install OpenScriptRecovery and let it install twrp--although, I guess if you aren't rooted yet that won't work
Did you try fastbooting the cwmr from here--
Did you check the md5 on the modaco recovery before flashing
At the red text did you try hitting vol+ or vol- not sure which one takes you to stock recovery. What does red text say--
Did you hard reboot with holding down vol- and power at same time then release pwr after screen goes off and continue to hold vol-
Not sure what is wrong, just giving some ideas--
Click to expand...
Click to collapse
Tyvm for your reply,
the cwmr for HTC One S does not exist any more on the page you gave me. There's only a blank page if you click on it
yes I did hard reboot and the red text says: This build is for development purposes only do not distribute outside HTC without HTC's written permission. Failure to comply my lead to legal action.
I tried the superboot from this site: htt p://w ww.m odaco.co m/to pic/352493-how-to-root-your-htc-one-s-for-windows-mac-and-linux/
This just brought up the recovery message again...
Then I tried flashing these files:h ttp://ww w.m odaco.c om/topic/353006-interim-clockworkmod-touch-recovery-for-the-htc-one-s-stock-download/
no help.
Any other ideas I should try?
However the flashing went through this time and there were no error, but the recovery is still f**ked.

rixrasta said:
Tyvm for your reply,
the cwmr for HTC One S does not exist any more on the page you gave me. There's only a blank page if you click on it
yes I did hard reboot and the red text says: This build is for development purposes only do not distribute outside HTC without HTC's written permission. Failure to comply my lead to legal action.
I tried the superboot from this site: htt p://w ww.m odaco.co m/to pic/352493-how-to-root-your-htc-one-s-for-windows-mac-and-linux/
This just brought up the recovery message again...
Then I tried flashing these files:h ttp://ww w.m odaco.c om/topic/353006-interim-clockworkmod-touch-recovery-for-the-htc-one-s-stock-download/
no help.
Any other ideas I should try?
However the flashing went through this time and there were no error, but the recovery is still f**ked.
Click to expand...
Click to collapse
Try this twrp .img
http://teamw.in/project/twrp2/100
The red text will stay till you relock, I believe, or flash stock recovery--

twrp recovery is the way to go. Me too I couldn't install the clockwork one!

rugmankc said:
Try this twrp .img
h ttp://team w. in/projec t/twrp 2/100
The red text will stay till you relock, I believe, or flash stock recovery--
Click to expand...
Click to collapse
I flashed the "openrecovery-twrp-2.2.2.0-ville.img". Didnnt change anything :/

sorry to hear that, not sure what else to do, so you still have onex recovery?
even if you run an ruu, i think you still have to flash the stock recovery first. haven't read up on that much, as never needed to run one
Don't know if trying to flash the stock recovery will help. I have the original one at home, but not sure if that is what they still call stock recovery with new ota's having come out

If it cannot load it, you probably spelt the name wrong. rename the image file to recovery.img (make sure it isn't .img.img) and flash that. Make sure the file path is correct! (e.g fastboot flash recovery C:\Users\Me\Desktop\recovery.img)

usaff22 said:
If it cannot load it, you probably spelt the name wrong. rename the image file to recovery.img (make sure it isn't .img.img) and flash that. Make sure the file path is correct! (e.g fastboot flash recovery C:\Users\Me\Desktop\recovery.img)
Click to expand...
Click to collapse
no no, the flashing finished successfully. I entered "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img" and then it flashed without problems, but in the phone it didn't change a thing. If I enter recovery then there's the android icon with a white background and under it is the red text.
But keep guessing, maybe I really am doing something stupid wrong
When I go to Fastboot USB mode with my phone then I open the command prompt and firstly type "cd c:\CWM" (the folder where my flashing files are). Then secondly I type "fastboot devices" (just to be shure). And thirdly depending on what I am flashing I type "fastboot flash recovery name.img". I have tried "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img", "fastboot flash recovery r2-modaco-recovery-clockwork-touch-ville" and "fastboot flash recovery ville_recovery_signed". Every one of them finishes successfully but doesn't change anything in the phone. I already have recovery-clockwork-touch-5.8.2.4-ville.zip and CWM-SuperSU-v0.96.zip in my phones directory to install root when I get into the recovery. In the C:\CWM folder in my computer are these files:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
(these where exctracted from fastboot.zip)
openrecovery-twrp-2.2.2.0-ville.img
r2-modaco-recovery-clockwork-touch-ville.img
ville_recovery_signed.img

the text won't disappear with unlocked bootloader, so that's ok.
Try to boot into bootloader hit fastboot reboot bootloader and then choose recovery. It can take a while to boot into recovery.
Gesendet von meinem HTC One S mit Tapatalk 2

stunner2002 said:
the text won't disappear with unlocked bootloader, so that's ok.
Try to boot into bootloader hit fastboot reboot bootloader and then choose recovery. It can take a while to boot into recovery.
Gesendet von meinem HTC One S mit Tapatalk 2
Click to expand...
Click to collapse
fastboot ->reboot bootloader ->bootloader ->recovery. Absolutely no change, It took half a second to bring up the "HTC quietly brilliant" logo and about two seconds for the red text to appear under it. No buttons work after that and I just have to hold the power button down to shut it down.
And by bootloader is unlocked!

As stunner said above it can take a while to boot into recovery, how long have you waited?
Give it a few minutes... Also you could try flashing stock recovery, it is distributed in the all-in-one tool and also in paulobriens posts about superboot. Then run a RUU.
But my best to would be to try fastboot booting a custom recovery, "fastboot boot cwm.img".

If this is the thing where you go int recovery for a millisecond and then back to the 'red text' screen (you have to watch carefully to notice), you should try erasing your cache in fastboot mode.
fastboot erase cache
Click to expand...
Click to collapse
-Jobo

It's gotten a little confusing and some suggestions are being repeated. I wonder if the android icon you are describing is the stock recovery symbol. At that screen have you tried to press vol+ or maybe volume-. I forget which one takes you to stock recovery. May want to check on that.
Also, have you tried typing "fastboot boot recovery" to go straight to recovery, bypassing htc restrictions
Here is very early stock recovery--not sure if it is still considered "stock" with new versions out now--I did mention that earlier--
https://www.dropbox.com/sh/yhrq0tia8512rj9/go28kc1NeP/ville_recovery_signed.img
I did have issues fastbooting recovery before. You can as mentioned try fastboot erase cache before fastbooting recovery. And change the name of your recovery to just recovery.img before you fastboot.
I assume you have nandroid backup on phone and copies of it and sdcard backup on pc.
I think when I had issues with recovery sticking it was my N1 and I typed "fastboot erase system" first, then fastbooted recovery. Then wiped all and restored nandroid. I am not sure we can do that on the 1s with no s-off. Someone else may know.
Can you access sdcard where you could reformat it fat32 thru a windows formatter program. Of course copy all to pc first. Sometimes sdcard formats help things you wouldn't expect it to.
Some folks have reported formatting works better thru phone on the 1s, maybe because it is an internal card. I did it once and think I had to redo it thru phone. But, if it gets recovery working, no big deal.
All these are suggestions and as the devs say--at your own risk--
I thought you said you said in first post, phone works, just no root capabilty. If that is true it should be fixable--I hope.
---------- Post added at 05:06 PM ---------- Previous post was at 04:32 PM ----------
rixrasta said:
no no, the flashing finished successfully. I entered "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img" and then it flashed without problems, but in the phone it didn't change a thing. If I enter recovery then there's the android icon with a white background and under it is the red text.
But keep guessing, maybe I really am doing something stupid wrong
When I go to Fastboot USB mode with my phone then I open the command prompt and firstly type "cd c:\CWM" (the folder where my flashing files are). Then secondly I type "fastboot devices" (just to be shure). And thirdly depending on what I am flashing I type "fastboot flash recovery name.img". I have tried "fastboot flash recovery openrecovery-twrp-2.2.2.0-ville.img", "fastboot flash recovery r2-modaco-recovery-clockwork-touch-ville" and "fastboot flash recovery ville_recovery_signed". Every one of them finishes successfully but doesn't change anything in the phone. I already have recovery-clockwork-touch-5.8.2.4-ville.zip and CWM-SuperSU-v0.96.zip in my phones directory to install root when I get into the recovery. In the C:\CWM folder in my computer are these files:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
(these where exctracted from fastboot.zip)
openrecovery-twrp-2.2.2.0-ville.img
r2-modaco-recovery-clockwork-touch-ville.img
ville_recovery_signed.img
Click to expand...
Click to collapse
you should also have adb.exe if you are using adb--

frdd said:
As stunner said above it can take a while to boot into recovery, how long have you waited?
Give it a few minutes... Also you could try flashing stock recovery, it is distributed in the all-in-one tool and also in paulobriens posts about superboot. Then run a RUU.
But my best to would be to try fastboot booting a custom recovery, "fastboot boot cwm.img".
Click to expand...
Click to collapse
Okay I waited for 10 minutes, nothing happens. I've even tried to hold down all the button combinations(with the three buttons) for a few minutes.
I've tried flashing everything and fastboot boot just takes me directly to the recovery with the red text. I flashed both the recoveries in the all-in-one tool.
As I know absolutely nothing about RUU(only what the letters stand for) then I'd rather not do that because I read from some threads that RUU has quite a high chance to mess up your phone. Or if you direct me to a tutorial that u insure me that is 100% good then I could give it a go : D

[
I think I have made ​​the same mistake of flash recovery, but I can not get into cwm recovery, I only appear for 1 second the recovery, then restarts and returns to the operating system. SD card, all changes are discarded when you restart the phone, which is also only if I try to install or remove some utility. Can not install any recovery, even if fastboot works well and looks real mind install the recovery but when I reboot, it returns to its previous behavior, with recovery not working. I tried to install the recovery in every way, from fastboot, from All in one with quickroot, but none of these operations has changed the state of the system.
Unfortunately you can not install a Stock RUU because the bootloader unlocked and the recovery is not the stock, and especially not when there is no tutorial to follow to bring this situation to the ONE S, to its original state
Hopefully someone will be able to find a solution to your and my problem.

One option you guys may need to entertain, if applicable, would be to exchange phones with Carrier. Worth a shot--
I have not heard of this exact issue, but most comments say if you can't boot to recovery you are bricked--
Has anyone tried "fastboot boot recovery" command in terminal window?

[Q] Nexus 5 stuck on boot, and wont go into recovery help?

Well, I was using an app called screen dimmer, and did pressed the button to dim the screen when all of a sudden it froze. It was like this for a while so I restarted it, it is able to go in fastboot, but nothing else. When i start It it hangs on the boot loader screen and can stay like that all day. if I go into recovery the screen goes black and the display is only backlit. I was going to try to to use the adb to factory reset it, but I could not get it to recognize the nexus 5 as a device. I used a bunch of different drivers. I did root my phone, and have the exposed framework but this was done a long time ago and I had no problems since. no idea how to fix this any help?!?!? Sorry if this is the wrong place to put this I'm new to this site.

2point said:
Well, I was using an app called screen dimmer, and did pressed the button to dim the screen when all of a sudden it froze. It was like this for a while so I restarted it, it is able to go in fastboot, but nothing else. When i start It it hangs on the boot loader screen and can stay like that all day. if I go into recovery the screen goes black and the display is only backlit. I was going to try to to use the adb to factory reset it, but I could not get it to recognize the nexus 5 as a device. I used a bunch of different drivers. I did root my phone, and have the exposed framework but this was done a long time ago and I had no problems since. no idea how to fix this any help?!?!? Sorry if this is the wrong place to put this I'm new to this site.
Click to expand...
Click to collapse
You need to find a driver that works so it'll recognize the device. Once you do this, you need to flash boot.img to restore the recovery since not working. Then, redo the ROM or restore from backup if you can. Flashing a new recovery boot.img should fix the issue.

2point said:
Well, I was using an app called screen dimmer, and did pressed the button to dim the screen when all of a sudden it froze. It was like this for a while so I restarted it, it is able to go in fastboot, but nothing else. When i start It it hangs on the boot loader screen and can stay like that all day. if I go into recovery the screen goes black and the display is only backlit. I was going to try to to use the adb to factory reset it, but I could not get it to recognize the nexus 5 as a device. I used a bunch of different drivers. I did root my phone, and have the exposed framework but this was done a long time ago and I had no problems since. no idea how to fix this any help?!?!? Sorry if this is the wrong place to put this I'm new to this site.
Click to expand...
Click to collapse
Hi, In first place, You are in the right place to get help:good:
2. ADB won't work on fastboot nor in a damaged recovery.
3. fastboot works:victory: Try to flash recovery once again (fastboot flash recovery recoveryname.img)
4. if 3 works, wipe system, caches. Flash the Rom you want, don't use that app anymore.

GUGUITOMTG4 said:
Hi, In first place, You are in the right place to get help:good:
2. ADB won't work on fastboot nor in a damaged recovery.
3. fastboot works:victory: Try to flash recovery once again (fastboot flash recovery recoveryname.img)
4. if 3 works, wipe system, caches. Flash the Rom you want, don't use that app anymore.
Click to expand...
Click to collapse
Thanks! got to recognize any way to do this without loosing data?

2point said:
Thanks! got to recognize any way to do this without loosing data?
Click to expand...
Click to collapse
There is a chance to keep your data + storage contents. If you manage to flash and boot into recovery, in 'wipe' menu manually check-mark "cache,system"
don't mark internal "storate and data", nothing will happen to your media and apps data.

2point said:
Thanks! got to recognize any way to do this without loosing data?
Click to expand...
Click to collapse
May be able to dirty flash but most likely, since you had the screen dimmed too much, you'll have to wipe data in order to override/remove the problem. You can try this way but may just send you back through this whole process if problem reoccurs. I'd just wipe the data to be safe.

2point said:
Well, I was using an app called screen dimmer, and did pressed the button to dim the screen when all of a sudden it froze. It was like this for a while so I restarted it, it is able to go in fastboot, but nothing else. When i start It it hangs on the boot loader screen and can stay like that all day. if I go into recovery the screen goes black and the display is only backlit. I was going to try to to use the adb to factory reset it, but I could not get it to recognize the nexus 5 as a device. I used a bunch of different drivers. I did root my phone, and have the exposed framework but this was done a long time ago and I had no problems since. no idea how to fix this any help?!?!? Sorry if this is the wrong place to put this I'm new to this site.
Click to expand...
Click to collapse
Oy vey! You shouldn't have been tinkering as you clearly don't know what you're doing.
[TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
2point said:
Thanks! got to recognize any way to do this without loosing data?
Click to expand...
Click to collapse
No, and if you had done your homework you would know that. If the data is so important, back it up before modding.

GUGUITOMTG4 said:
There is a chance to keep your data + storage contents. If you manage to flash and boot into recovery, in 'wipe' menu manually check-mark "cache,system"
don't mark internal "storate and data", nothing will happen to your media and apps data.
Click to expand...
Click to collapse
When I do fastboot boot recovery.img I get the android bot with a red exclamation but nothing else I might just do flashall

2point said:
When I do fastboot boot recovery.img I get the android bot with a red exclamation but nothing else I might just do flashall
Click to expand...
Click to collapse
Reflash the recovery.img

2point said:
When I do fastboot boot recovery.img I get the android bot with a red exclamation but nothing else I might just do flashall
Click to expand...
Click to collapse
The general idea is that your recovery is broken.
So, you need to flash a new recovery by placing a recovery.img file into your fastboot folder in the computer(recommend twrp). Like you did the first time you fladhed a recovery.
Then, turn off the phone, press volume down+ power button and it will boot into bootloader. Make sure it is on fastboot mode. After that, on the computer open cmd on the fastboot folder and and type:
fastboot flash recovery nameofrecoveryfile.img,
press enter.
It should flash a new recovery image if done correctly. Then, poweroff the phone, boot again into bootloader, choose recovery and it will reboot into recovery. Then follow. The steps of my first post.

jd1639 said:
Reflash the recovery.img
Click to expand...
Click to collapse
GUGUITOMTG4 said:
The general idea is that your recovery is broken.
So, you need to flash a new recovery by placing a recovery.img file into your fastboot folder in the computer(recommend twrp). Like you did the first time you fladhed a recovery.
Then, turn off the phone, press volume down+ power button and it will boot into bootloader. Make sure it is on fastboot mode. After that, on the computer open cmd on the fastboot folder and and type:
fastboot flash recovery nameofrecoveryfile.img,
press enter.
It should flash a new recovery image if done correctly. Then, poweroff the phone, boot again into bootloader, choose recovery and it will reboot into recovery. Then follow. The steps of my first post.
Click to expand...
Click to collapse
Did that and get a
C:\Users\nkkou_000\programs\adt-bundle-windows-x86_64-20131030\sdk\platform-tool
s>fastboot flash recovery openrecovery-twrp-2.6.3.4-hammerhead.img
sending 'recovery' (13272 KB)...
OKAY [ 0.620s]
writing 'recovery'...
FAILED (remote: flash write failure)
finished. total time: 44.593s
C:\Users\nkkou_000\programs\adt-bundle-windows-x86_64-20131030\sdk\platform-tool
s>

But I can do fastboot boot openrecovery-twrp-2.6.3.4-hammerhead.img and will will boot into the recovery just fine
And that twrp says that i have no os installed

2point said:
But I can do fastboot boot openrecovery-twrp-2.6.3.4-hammerhead.img and will will boot into the recovery just fine
And that twrp says that i have no os installed
Click to expand...
Click to collapse
You have a couple of options depending on how much data you can afford to lose on your phone. The least intrusive is to adb push a Rom on to your phone when you're in twrp Then flash that rom in twrp
The easier, but you'll lose all data on your phone is to flash the flash-all.bat file in fastboot
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

2point said:
But I can do fastboot boot openrecovery-twrp-2.6.3.4-hammerhead.img and will will boot into the recovery just fine
And that twrp says that i have no os installed
Click to expand...
Click to collapse
Then, it seems recovery now is good. If you have rom zip in the storage. Just wipe system and cache, flash the rom and see what happens

When in the twrp I can't get fastboot to recognize it as a device, or adb either

2point said:
When in the twrp I can't get fastboot to recognize it as a device, or adb either
Click to expand...
Click to collapse
Your adb drivers aren't setup correctly. They're different than the fastboot ones. Try Google tool adb fastboot drivers xda.

jd1639 said:
Your adb drivers aren't setup correctly. They're different than the fastboot ones. Try Google tool adb fastboot drivers xda.
Click to expand...
Click to collapse
When you are on twrp. You dont need to use fastboot nor adb. Just flash a rom if have one to flash

GUGUITOMTG4 said:
When you are on twrp. You dont need to use fastboot nor adb. Just flash a rom if have one to flash
Click to expand...
Click to collapse
How do i do that?

2point said:
How do i do that?
Click to expand...
Click to collapse
Have you flashed roms before? And do you have one on your internal sdcard? If so flash it in twrp

jd1639 said:
Have you flashed roms before? And do you have one on your internal sdcard? If so flash it in twrp
Click to expand...
Click to collapse
I have the factory image from google for my nexus 5

Stuck in boot

Hi! My Oneplus One is stuck in boot (the oneplus logo).
I can get into fastboot but not recovery. I have followed some softbrick guides and the problem that I have is that even after flashing twrp as recovery I cant get into recovery. when I try to start it to recovery (volume up + power) I only get to the oneplus logo again. and when I use "fastboot boot twrp.img" the backlight comes on but the fastboot image stays, fastboot doesnt recognize it from this point so i have to restart it into fastboot mode again.
i have tried to flash the factory images, but nothing seems to change.
I dont know what to do, pls help..

After flashing recovery from fastboot, do NOT issue the reboot command. Press and hold the power button till phone powers off. If you issue the reboot command from fastboot, custom recovery will be lost. Also, don't know which twrp version you are trying to flash, but I would suggest flashing 2.8.6.0 first, then after you know you can get into recovery, you can flash another version.

Additionally, to boot to recovery you have to hold
volume down + power
volume up + power brings you to fastboot
Last but not least,
fastboot boot twrp.img
does not boot the recovery which is on your device, but the recovery image which is located inside your fastboot folder on your pc.

kenboyles72 said:
After flashing recovery from fastboot, do NOT issue the reboot command. Press and hold the power button till phone powers off. If you issue the reboot command from fastboot, custom recovery will be lost. Also, don't know which twrp version you are trying to flash, but I would suggest flashing 2.8.6.0 first, then after you know you can get into recovery, you can flash another version.
Click to expand...
Click to collapse
Ok, I did not know that the reboot command removes the custom recovery. Im almost certain that i've tried just powering down and trying recovery before too tho.
I was trying to flash twrp 3.0.0.0 so i'll try 2.8.6.0 asap
AcmE85 said:
Additionally, to boot to recovery you have to hold
volume down + power
volume up + power brings you to fastboot
Last but not least,
fastboot boot twrp.img
does not boot the recovery which is on your device, but the recovery image which is located inside your fastboot folder on your pc.
Click to expand...
Click to collapse
oops, i ofcourse ment that i try to get to recovery by volume down+power, and i know fastboot boot twrp.img boots from the .img on the computer, i just think its peculiar that nothing happens.

nothing has really happend after this, so i still need help.
summary: bump

I don't really get what you say. Perhaps i don't experiences before. @kenboyles72 is correct, official ROM may delete custom recovery (you can change the setting). Then @AcmE85 gives you an option, but it does not work.
Here is my option:
1. download any custom rom. The best idea is as minimum MB as possible. (Flash ROM directly from your PC)
2. flash your recovery, do NOT reboot. (fastboot flash recovery rec.img)
3. flash your ROM. (fastboot flash zip rom.zip)
Let's see if this would help you.

I had some issues a while back, where I was caught in a bootloop and flashing another rom. So I followed this guide, https://www.reddit.com/r/oneplus/comments/31sf0x/guide_how_to_return_from_oxygenos_to_stock_cm11s . You can skip flashing the userdata.img to keep all data on sdcard. Also you can substitute flashing twrp recovery img for stock recovery. I myself went ahead and flashed all stock just to make sure everything booted correctly, then went into dev options and disabled update cm recovery, booted back to fastboot and flashed twrp 2.8.6.0. Evey thing worked like a charm.

Flasing stock rom did not affect anything noticeably.. phone is still stuck in boot/fastboot

Just to confirm, have you tried either/both of these:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

I have followed the return to stock guide, but not the unbrick, since my phone is softbricked, not hardbricked.
I have followed this guide tho, to no avail https://m.reddit.com/r/oneplus/wiki/devices/one/brickguide
the strange thing is that i didnt cause this. The phone started randomly overheating and one time it just never booted up.