Database Info

Changing vibration mode - is it possible?

Hi everybody, is there any way to change either the length of vibration cycle, or the intensity of it? (I assume either speed of the motor or legth of the cycle) - It vibrates so much U can hardly call it "silent" mode anymore ? thx. (Treo 750v WM5)

I had smae problem i ware playing with notification settings and did somthing (i dont know what) but now it vibrate for less then a second it realy annoying.

Not much of a help though... anyone else has an idea? thx

search "treovibe" on google

Thx, found. Bottomline is: always try google first ...

Problem with Email Folder in landscape mode

Happy New year everyone!
I have a problem that I could not find an answer to by doing a search. When I try to access my email folders in landscape mode I can see the folders but no words. (I can see the inbox folder but it does not say inbox next to it). Near some of the folders it looks as if all of the letters of the folder names have been place one on top of each other. It almost looks like a Chinese symbol. Sometime this is right next to the folder other times it is all the way across the screen. When the phone is in the portrait mode everything is fine. It is as if the screen isn't drawing properly.
I hope this make sense and I hope i am using the proper terms. Please go easy on me as I am new to this phone and really don't understand some of the thinks on this forum.
Thanks for any advice you might have!!!

I am seeing the same problem on my Fuze, but pretty much on everything that's text when I look at stuff in landscape mode.
When I try to enter text, the input box shows the cursor moving, but no characters show up. If I then close the keyboard, everything I typed is there in portrait mode. And I also see the jumble of text sometimes where there is a single "smudge" and the letters look like they're on top of each other.
This is VERY annoying, and I can't figure it out. I've only owned the Fuze about a week, but it seems to me it worked fine when I got it. It's as if I have installed some software (or perhaps it's one of the customization tools - I've run both Diamond Tweak and Diamond TF3D Config) that wiped out the fonts required for landscape mode.
The other thing is, it doesn't happen ALL the time, only about 80%. The rest of the time it works as it should.
Any help or ideas would be most welcome. If I can't see text entry in landscape mode, the flip out keyboard becomes useless, and I may as well have bought the thinner Touch Diamond.

I had this problem when I enabled ClearType in landscape mode...try to look at it if you have it enabled..and if so, disable it...

Thanks, that seems to have worked.
Is there a separate setting for landscape mode somewhere, or just the master ClearType on-off in Settings...Screen?

it's in Advanced Config or Diamont Tweak ..not sure, but one of it has that option

Tried that, and also modifying the registry directly, and neither worked. If the "main" ClearType setting is on in Settings...Screen, text in landscape mode is illegible no matter what else I do. The system seems to ignore the registry setting for turning it off in landscape mode.
While turning ClearType off does work, it's annoying to have to do it because the text in portrait mode looks so much better with it on. Oh well. I guess it's a bug in WinMobile 6.1.
In any case thanks for the quick response. I did a search in the forums here, and this is apparently a well know bug with no available workaround for the moment.

hmm, mine is working correctly...when I open Screen options in landscape, ClearType is Off and cannot be set to On...and in Portrait mode, it can be turned Off
DiamondTweak > 17.7 try that...if it doesn't work..hmm...flash ROMeOS or other ROM

lepermessiah said:
hmm, mine is working correctly...when I open Screen options in landscape, ClearType is Off and cannot be set to On...and in Portrait mode, it can be turned Off
DiamondTweak > 17.7 try that...if it doesn't work..hmm...flash ROMeOS or other ROM
Click to expand...
Click to collapse
On mine, screen options in landscape mode has cleartype set to "on" and cannot be turned off. It's grayed out. It follows the setting in portrait mode - if I turn it off there, it's off in landscape, if I turn it on there, it's on in landscape.
Tried DiamondTweak, made no difference.
ADDENDUM: Well, SOMETHING made a difference, because once I reset the thing, it now acts as you describe - I have ClearType on in portrait, and off in landscape. Woohoo!
Thanks much!

Slide out keyboard issue

Hi all,
I am new to this forum, so please bear with me if I have posted in the wrong section.
I am with T Mobile UK and I have the MDA Vario IV.
Recently, I have had a strange problem when using my slide out keyboard. When I use the onscreen keyboard, I can see the text as I type. However, when I use the slide out keyboard, I can see the cursor moving as I type, but I can't see the text being typed. This happens when composing an SMS, typing into Google's search box, entering log in details for Facebook, etc etc.
As I am Deaf, I obviously use SMS and emails a lot, so this is a problem, as I find the slide out keyboard MUCH easier to use than the onscreen one.
Hope you can help.
Wayne.

How fast do you begin typing after you slide out the keyboard? I know sometimes when I begin typing too quickly after sliding it out that the cursor will move while I'm typing but no letters will be displayed...but then they all pop up at once.

Have you used a tweaking tool or registry editor to turn on ClearType in Landscape?
There is a known issue with the font not displaying.
David

winthropdc said:
Have you used a tweaking tool or registry editor to turn on ClearType in Landscape?
There is a known issue with the font not displaying.
David
Click to expand...
Click to collapse
Hi mate...
Ahhh, that could be it...let me try it & get back to you.

You are correct David....that WAS the problem!
Thanks - all working fine now

keyboard lag solved - possible software conflict
I had tried all the above fixes and they helped, but did not fully alleviate the lag. I was getting annoyed and wishing my hermes was still alive.
Then I remembered that the only real difference in my keyboard setups between the fuze and the 8525 was that I was using the iphone like full qwerty sip instead of the keyboard sip. i selected the finger unfriendly keyboard sip, and voila the slide ouy now has instantaneous response. no lag at all.
It seems to be that the full qwerty sip option forces a t9 function even when you have all that turned off.
Happy again except for the laggy shift between portrait and land scape.
now to find an iphone sip clone that doesnt affect the slideout. By the way this is with the recent stock att rom.

further issues with keyboard
The lagging keyboard issue continues to nag me. it seems to be related to the fuze having a difficuly time with switching to landscape mode. for instance in opera mini when i switched to landscape to type this there is no lag. if I am using messaging for text or email, when I switch to landscape, the lag occurs until I change the sip. it doesnt matter which sip i change to or from, just that it gets changed. i suspect that it has something to do with resetting the keyboard drivers. anyone else noting this problem. Anyone know of a fix? I have t9x turned off, cleartype turned off.

Rotating to Landscape for Incoming Call & Dialler

Hi everyone,
I'm really new to this so go easy! Also, I'm sorry if this type of question has been posted already. I have looked around and can't find anything that fits the topic.
I'm using the HTC Desire HD and use this a lot for navigation whilst driving. I use the navigation app in landscape mode and my in car holder is landscape. I have recently posted on here to get my Spotify to work in landscape as well so it is really easy to use in the dock.
However, I receive phone calls and the incoming call screen then flips to portrait. This means I have to tilt my head to the side to view the call! This is also a problem whilst using the dialler.
I use Launcher Pro and the home screen rotates to landscape so I thought the dialler and incoming call screen would do the same. Seems not.
I have seen apps where the dialler uses landscape modes, this solves a part of the issue. I am really wanting to be able to set the phone up so everything is landscape when tilted this way. I want the dialler and incoming call screen to do the same as the rest of my phone does when tilted in this direction.
Any help would be much appreciated, I am willing to learn and look into the coding if this is what is required.
Thanks.

I search the same solution for it. I have a dockstation in landscape and i search how rotate the screen when I receive a incoming call.
Thanks ^^

I had the landscape call working for me in my Desire HD with Android Revolution ROM, but somehow i lost this function and i can't figure out how to get it back to work. It was very handy to use when driving, and has also the option on a button to has someone else to the cal.
Hope we find the solution soon !!

Samsung DEX keyboard layout problem - Samsung Galaxy Note 10 (One UI 3.1)

Hello guys,
I have a problem with Samsung DEX. After plug in my phone to DEX I use Czech language and I need special czech keys when I am typing on my physical keyboard. Problem is that when I am typing on my physical keyboard, the keyboard has still English layout even if I have changed it to Czech layout in settings. I tried the other languages (german, swiss german and etc.) and keyboard has a still only English layout. Could you help me please? I cannot find out how to solve this problem (I had this problem with One UI 3.0 and I have upgraded my phone to One UI 3.1 today and problem is still there).
Thank you in advance, Jiri.

Jiri_cz said:
Hello guys,
I have a problem with Samsung DEX. After plug in my phone to DEX I use Czech language and I need special czech keys when I am typing on my physical keyboard. Problem is that when I am typing on my physical keyboard, the keyboard has still English layout even if I have changed it to Czech layout in settings. I tried the other languages (german, swiss german and etc.) and keyboard has a still only English layout. Could you help me please? I cannot find out how to solve this problem (I had this problem with One UI 3.0 and I have upgraded my phone to One UI 3.1 today and problem is still there).
Thank you in advance, Jiri.
Click to expand...
Click to collapse
Hi, I`ve been loosing sleep over the same issue for the last two days. The external keyboard with DeX wouldn`t type in Bulgarian regardless of the little pop-up tile that indicates language switch.
PROBLEM SOLVED!
It turns out the culprit here is Desktop Hub accessibility settings. Turned them OFF in Settings --> Accessibility --> Installed Services and everything is back to normal!
Hope it works out for you as well.

ilkobo13 said:
Hi, I`ve been loosing sleep over the same issue for the last two days. The external keyboard with DeX wouldn`t type in Bulgarian regardless of the little pop-up tile that indicates language switch.
PROBLEM SOLVED!
It turns out the culprit here is Desktop Hub accessibility settings. Turned them OFF in Settings --> Accessibility --> Installed Services and everything is back to normal!
Hope it works out for you as well.
Click to expand...
Click to collapse
You are god man! I have there "Control Center" which I have downloaded from Galaxy store (it is for control your phone by swiping from side of phone screen (turn on/of wifi, NFC, etc...)). I turn it off in Accessibility => Installed Services and my czech layout on physical keyboard working well from this time! Thank you so much, I have searching almost 3 weeks on internet for solution and nobody has helped me. Thank you!