Hi everyone. I have a problem with my Tipo st21i. I really need the calibration of my display. I was reading some threads about it on this forum , but I still don't know what I have to do. I downloaded the "Calibration.apk" file or this 4shared.com/rar/3p6YulVl/ST21i_calibrate.html , but it still doesn't work for me. If I want to istall it , it writes me "the application is not installed" I tried repair it also from my PC but in the "cmd" it writes me some errors.
My phone is rooted and bootloader is unlocked. I have Cyanogenmod 10 , fxp 233.
Related
Hello everyone . I have successfully rooted the XPERIA J but after installing the CWM mentioned in the thread : http://forum.xda-developers.com/showthread.php?t=2033114
My Xperia can boot into recovery all right but it doesnt turn on in NORMAL mode . When I press the power button the SONLY LOGO comes up and then the phone turns off.
I had to repair it using PC Companion. Can you tell what the problem is . I changed the model number in build.prop too but it didnt help.
Can you please provide a working CWM for Xperia J ?
Need it urgently for installing CM10.
Thanks in advance.
same problem, but i try to use Sony update service and restore my phone to normal, it's easy to use is working only your phone is off, sry for my bad english
before instal CWM you need to unlock bootloader
souranil said:
Hello everyone . I have successfully rooted the XPERIA J but after installing the CWM mentioned in the thread : http://forum.xda-developers.com/showthread.php?t=2033114
My Xperia can boot into recovery all right but it doesnt turn on in NORMAL mode . When I press the power button the SONLY LOGO comes up and then the phone turns off.
I had to repair it using PC Companion. Can you tell what the problem is . I changed the model number in build.prop too but it didnt help.
Can you please provide a working CWM for Xperia J ?
Need it urgently for installing CM10.
Thanks in advance.
Click to expand...
Click to collapse
that cwm only works on .18 & .28 fw. thats why most people like me with unlockable bootloaders are stuck on primitive stock fw no one has developed a proper cwm for locked bootloaders yet
Dear members, I have a sony tipo dual. I tried to install cm10 on it, and was successful but later when i inserted the sim i came to know that CM10 doesn't support tipo dual.
Now my problem:
1. I tried to use PC Companion and go back to original Firmware but it says "Phone has modified software. It cannot be updated."
2. I tried to flash it with a Central Europe stock, but everytime i do that it throws an error and stops.
3. I am not able to copy the Gimlo firmware on the phone. Whenever i try to copy it says "Cannot copy item. The device disconnected or stopped working."
4. I tried using fastboot and install the .sin files but I was able to install only the kernel.sin. While installing the system.sin i gave an error of Too large file.
I have attached the flashtool's log
30/015/2013 19:15:04 - INFO - Unable to read from phone after having opened it.
=============================================================at this point my phone restarts
30/015/2013 19:15:04 - INFO - trying to continue anyway
Now i just want to restore this phone to its original software. The biggest mistake i did was not to keep a backup when i installed CM10.
Please help me...
Perhaps Sony Update Service. So flashing a stock kernel doesn't work? Have you unticked TA/no final verification?
Sometimes this works! Try that first and otherwise Sony Update Service.
Success, and good luck!
Sent by magic!
Hi,
I have already tried using the Update service, but i get the same error "Modified Software".
Also the most irritating things is that I am not able to copy anything on the phone when I connecct it to my pc.
I tried disabling the TA/ Final verification, but this is not helping either.
Guys plz help.... the phone restarts during the flashboot process..
Edit:
I was trying to edit the build.prop file.. If this works can I use Sony Update service to reinstall the original software?
Can anyone please share the original build.prop file for tipo dual. I dont have the original one and my current build.prop file shows the device as ST21i (Sony Tipo) whereas it should be ST21i2 (Sony Tipo Dual).
Expecting your help...
hello! friends..I desperately need your help..I'm using Sony Xperia ZR ,running 4.3. Firmware version 10.4.1.B.0.101.
I just want to root my device that's all..I have tried the procedure described in this site using runme_win.bat file...even many times...But everytime it's just showing "waiting for device" command in the prompt..though i have installed latest Sony PC companion...turned on debugging mode and all other stuffs..but it's not working...so pls help me friends..I would be grateful to you,,,Thank u...
Try it from here :
http://forum.xda-developers.com/showthread.php?t=2427995
SONY XPERIA MIRO (ST23I) GONE BLACK !!!
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
What am I suppose to do?
A BIG THANKS FOR HELPERS!!
rannusmash said:
SONY XPERIA MIRO (ST23I) GONE BLACK !!!
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
What am I suppose to do?
A BIG THANKS FOR HELPERS!!
Click to expand...
Click to collapse
Download Sony PC Companion .
Connect your phone in firmware flashing mode.
it will automatically install the required drivers.
And make sure to put the firmware ftf file into the folder named 'firmwares' of flashtool.
Please press the thanks button on the bottom right corner of this post if I helped you.
rannusmash said:
SONY XPERIA MIRO (ST23I) GONE BLACK !!!
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
What am I suppose to do?
A BIG THANKS FOR HELPERS!!
Click to expand...
Click to collapse
Don't worry, Your phone is not hard bricked. As you mentioned that on starting , phone is vibrating that means there are chances to recover your phone.
1.First go through this guide :Using Flashtool
2.Download your current stock firmware . Visit this: Miro all official firmwares
3.Install proper drivers as mentioned in the above 1.flashtool guide.
4.Flash the firmware for your phone , according to the above 1. Flastool guide.
5.Wait untill flashing completes. start your device when you are told to do so.
Good luck
Thread closed
Thank you for the replies.
My phone is working fine now. So the thread is CLOSED
Hello everyone, I hope someone can help me.
I recently unlocked the bootloader from my Xperia Xa F3111 ( I followed the official metod and everthing went smooth )
But i didn't knew that doing that I couldn't update my phone firmware anymore. ( using Xperia companion or software update option on my phone )
So i tried using sony emma. Sony says that Xperia Xa is supported but for some reason it doesn't recognise my phone.
This is what I did affter the install, I put the customization file in emmas folder, I disabled my antivirus and firewall , I run emma as administrator , pressing the volume down key I connect the phone to my pc and then while emma is trying to identify my phone im prompt whit an unknow model picker , if i scrolled down the list it isn't listed my phone model. and if i cancel the prompt it recognizes my phone but also gives me an error triangle saying no available services available to your phone and on the left panel another small triangle under status saying service execution was aborted . Any ideas please ?? Thank you
NigmatiK said:
Hello everyone, I hope someone can help me.
I recently unlocked the bootloader from my Xperia Xa F3111 ( I followed the official metod and everthing went smooth )
But i didn't knew that doing that I couldn't update my phone firmware anymore. ( using Xperia companion or software update option on my phone )
So i tried using sony emma. Sony says that Xperia Xa is supported but for some reason it doesn't recognise my phone.
This is what I did affter the install, I put the customization file in emmas folder, I disabled my antivirus and firewall , I run emma as administrator , pressing the volume down key I connect the phone to my pc and then while emma is trying to identify my phone im prompt whit an unknow model picker , if i scrolled down the list it isn't listed my phone model. and if i cancel the prompt it recognizes my phone but also gives me an error triangle saying no available services available to your phone and on the left panel another small triangle under status saying service execution was aborted . Any ideas please ?? Thank you
Click to expand...
Click to collapse
Download Flashtool to update and use the Integrated Xperifirm to find firmware updates.
http://www.flashtool.net/downloads_windows.php
Thank you very much it worked