Database Info

After flashing cm10

Hey guys …. I just flashed cm10 from rootgalaxynote.com it reboot and got stuck on the boot screen I think. I’ve tried to boot into cwm with the button combo but it won’t get me into cwm
Btw I'm using galaxy note
I NEED HELP SERIOUSLY !!!!!!!!!!!!!!!
Please replay ASAP

Had the problem {FIXED}
Had this problem with my HTC Sensation with cm10 put the stock ROM back on and then put CM10 again but before booting now wipe cache and factory reset and the there is another cache in advanced after all are clear, reboot
PLZ thanks If I helped :good:

Lizardwithhat said:
Had this problem with my HTC Sensation with cm10 put the stock ROM back on and then put CM10 again but before booting now wipe cache and factory reset and the there is another cache in advanced after all are clear, reboot
PLZ thanks If I helped :good:
Click to expand...
Click to collapse
How do I put the stock ROM back ? Is it necessary to get into cwm ?

FLash stock ROM
To put the stock ROM back you just have to download some stock ROM for your phone and flash it to your phone like you did with CM10.
Make sure you wipe factory / data in recovery mode.

GALAXY Y Boots only in Stock ROM even after flash

I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.

Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

[email protected] said:
Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Click to expand...
Click to collapse
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.

try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium

DJDSB said:
try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium
Click to expand...
Click to collapse
I have tried the following steps:
1. Odin stock rom: I just have pda,csc and modem. I do not have bootloader and pit.
2. Then went to Recovery and installed CWM
3. Installed custom rom JELLY Blast which previously had no issues. (Before this I wiped data,cache & dalvik)
4. Result - > Stuck on Samsung screen.
After which I cannot get back to any recovery mode anymore, it is stuck on samsung screen. All I have to do is go back to download mode and odin it again. But I really want to be back on custom roms

pavitar said:
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.
Click to expand...
Click to collapse
Yes u have to install rom by normal way
Updare your cwm to V6
Cwm will ask u to disable it
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

Generic Rom Flashing Issues
pavitar said:
I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.
Click to expand...
Click to collapse
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.

keeploving said:
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.
Click to expand...
Click to collapse
Thanks a Ton, this helped me. The only step I did not perform earlier is Fix Permissions.

[Q] sgh-i997 (samsung Infuse) keeps booting into recovery

Recently I flash a custom ROM 4.3 on Samsung infuse, I followed the steps carefully and the ROM was installed successfully. Although, I forgot to make a backup of the initial stock ROM.
When I rebooted, it boot back to recovery. I wipe cache, do factory reset, flash stock ROM with Odin and still the phone always boot into stock recovery.
I don't know what to do to bring the phone back to life.
Help pls!!!

wisdomabioye said:
Recently I flash a custom ROM 4.3 on Samsung infuse, I followed the steps carefully and the ROM was installed successfully. Although, I forgot to make a backup of the initial stock ROM.
When I rebooted, it boot back to recovery. I wipe cache, do factory reset, flash stock ROM with Odin and still the phone always boot into stock recovery.
I don't know what to do to bring the phone back to life.
Help pls!!!
Click to expand...
Click to collapse
what recovery did you had and what version was it?

Trozzul said:
what recovery did you had and what version was it?
Click to expand...
Click to collapse
It was CWM 6 before going back to stock ROM

Found the solution
http://forum.xda-developers.com/showthread.php?t=1116251

Need help - Install [ROM][P31xx][4.4.4] SlimKat went wrong

I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.

HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
It could be caused by a few things. It usually means outdated recovery. @Android-Andi has recovery thread in the Dev section with the latest versions of PhilZ, TWRP, and CWM. Try flashing one of those. Also, make sure you check the md5/sha1 on the downloaded file to make sure it isn't corrupt.
Sent from my SGH-T989
EDIT: my stupid phone put Italy when I was trying to type usually...

HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
Status 7 error means your recovery is outdated. Grab one of the latest versions from here: http://forum.xda-developers.com/showthread.php?t=2676180 flash it and your good to go.

Guys,
Thank you very much! I did it!

HowardAnton said:
Guys,
Thank you very much! I did it!
Click to expand...
Click to collapse
Very good! Have a good afternoon.
jrc2
Sent from my SGH-T989

[Q] Failed upgrade - now soft bricked

Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim

sheltont said:
Hi all...
I tried to upgrade by Tab 2 7" to KitKat today and failed. I installed Clockworkmod successfully, but then started getting error 7's. I discovered this was because it was outdated. I've tried to install updated clockwork mod which it says has been successful - but doesn't change the original.
I did a backup of my original rom, but this has failed to reinstall. I've tried to put an old version of cyanogen on it, which also has failed, and re-downloaded the stock rom from samsfirmware which passes through ODIN, resets but then the tab 2 hangs on the Samsung screen - flashing.
I can't seem to resolve it.
Has anyone got any ideas? I can't access anything other than clockworkmod - so if you think you know of a way I can successfully upgrade it I may stand half a chance.....
Thanks
Tim
Click to expand...
Click to collapse
Use Odin to restore to the stock ROM. Download the stock rom from samfirmware.com and flash it in Odin as PDA. Then, use the latest recovery (either TWRP, CWM, OR PhilZ) from @Android-Andi's recovery thread in the Dev section. You should now be able to flash any ROM you want to. Make sure you do a backup and a wipe system, cache, Dalvik, data, and android secure (if it's an option.)
Sent from my SGH-T989

thanks and....
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?

sheltont said:
Thanks so much, does it matter that it won't boot with the stock Roma which I've installed from sams? Will the recovery program still work?
Click to expand...
Click to collapse
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989

yep
jrc2 said:
What do you mean? Did you flash the stock ROM in Odin?
Sent from my SGH-T989
Click to expand...
Click to collapse
Yes, I did twice and it's still hung after apparent success installation according to Odin. I've tried it twice.

No success
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim

sheltont said:
Thanks
What I've done tonight is reflashed the original Rom - this time it blew away Clockworkmod. It still wouldn't boot. I then put a recovery solution on from your link, which has flashed well. However I've then tried three ROMS and each have hung after installation on the initial boot.
I'll try them again tomorrow night - but do you have any idea why three ROMS plus the stock keep failing?
Thanks
Tim
Click to expand...
Click to collapse
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989

good idea but still no success....
jrc2 said:
Did you wipe system, cache, Dalvik cache, and data before flashing and wipe cache and dalvik after flashing? And your tablet will bootloop after a reinstallation in Odin because Odin does not wipe before installation. After flashing in Odin, reboot recovery (make sure tablet is unplugged,) and wipe data, cache, and dalvik cache. Reboot and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
Hi, I've retried all that this morning-i must admit that I didn't know about wiping cache after install, however it's not made any difference, and still hangs on first boot...
Any other ideas? Thanks for all your help.

Happy success
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim

sheltont said:
Hi all
Thanks for all your help,especially rcj! I have managed to recover my device using cynagodmod 9 - it wont run 10 or 11 but at least its up and working - even if it's a downgrade from the Android version I was on Really don't care as I can use it again with a lot more memory.
Thanks - without you I would never have found Phils ROM which enabled me to get this far.
Tim
Click to expand...
Click to collapse
Which version of PhilZ? And I have found that TWRP 2.7.1.0 works better than other versions for KK.
Sent from my SGH-T989

Use latest Philz touch recovery. And use the rom and gapps compatible to your tab. Don't forget to reset to factory setting, clear cache and wipe dalvic cache before flashing the rom and gapps ☺
Sent from my GT-P3100 using XDA Free mobile app