Database Info

unrooting problem

Hi all,
I rooted my gf's nexus s a while ago to get the ics update faster.
A few weeks ago she updated it to jelly bean via ota.
Now for some reason my girl decided to do a factory reset few days ago
But now i want to unroot it and it's not working
when i go into recovery mode i get the android mascot laying down with an open stomach, but with a ! mark in a traingle
(i wanted to show a picture but the forum is preventing me from doing so)
anyone any idea what to do ?
EDIT: after trying to get into the recovery several times, the phone just died
it doesn't turn on anymore
what do i do now ?

lol it could be bricked if it wont turn on. the picture of andy laying down and an exclaimation point means you dont have a custom recovery installed. if she did a factory wipe and has the ota, the phone is most likely no longer rooted. you can just relock the phone and its like it never happened
Sent from my Nexus S 4G

alright
i just couldn't connect the phone anymore to my pc to lock it
found it weird...
anyway it's now to the shop as i couldn't get it working anymore
it went from 81% to 0% in seconds after disconnecting from the pc
after that it wouldn't turn on anymore

[Q] Factory reset bricked my device

Hi everyone, I want to know what this could be, my phone was just rooted, I tried to do factory reset on the android JellyBean(Configs>Privacity>Factory Reset), now my phone is stucked on a bootloop, I try to turn on my device and a screen with android being repaired appears, then a red triangle appears on the belly's droid and my phone turn off, anyone know what could be?
Really thanks for the attention mates, and sorry for my bad english!
@update
Just boot on recovery and Wipe Data/Cache, now my device is working fine, thank you guys xDD

I have the exact same problem on Canadian XT 925 all stock. Every time the phone is turned on, it goes back to the android robot with blue orbits moving in the stomach(repair), then the screen just goes black. The only work around I found is to use 3 button combo to go into recovery menu and hard reset the device, but this happens every time I turn the phone on and off.

Titerepayaso said:
I have the exact same problem on Canadian XT 925 all stock. Every time the phone is turned on, it goes back to the android robot with blue orbits moving in the stomach(repair), then the screen just goes black. The only work around I found is to use 3 button combo to go into recovery menu and hard reset the device, but this happens every time I turn the phone on and off.
Click to expand...
Click to collapse
This is an issue on the Rogers and Fido RAZR HD ...
Download the Original Rogers/Fido Rom : http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Download RSD Lite : http://fwteam.grupoandroid.com/OTAs/RSDLite6.1.5.zip
Flash !
Your phone is now 100 % full working !

Same thing
o2qc418 said:
This is an issue on the Rogers and Fido RAZR HD ...
Download the Original Rogers/Fido Rom : http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Download RSD Lite : http://fwteam.grupoandroid.com/OTAs/RSDLite6.1.5.zip
Flash !
Your phone is now 100 % full working !
Click to expand...
Click to collapse
Hi everyone. I got the same issue, but in my case i can't boot on fastboot, and my pc just recognize my razr hd as "QHSUSB_DLOAD" and can't find this drivers.
I tried to RSD as you said but RSD won't recognize it, so i don't know what else to do.
Any help will be appreciate.
:crying::crying:

Alcatel pixi 4 (6) stuck on alcatel logo please help!

Hi there first let me say sorry for any spelling mistakes i have dyslexia and its hard for me to spot everything when i look over it so sorry
now down to buissness i have an Alcatel 4 (6) 4g from argos in the uk i think the model on the phone shows as 9001X but also shows as 9001D when you connect wondershare or other tools
i broke the screen on the device and took it to one of thoes little shops in the mall to get it fixed when there the guy told me he could root the device for you for me at the same time i thought yeh cool save me from doing it my self
when i went back to get the phone later that day it worked good in fact perfect he had rooted the device using king root and all was working good the device was working but then it suddenly rebooted out of the blue when it was led on a table
when the device started back up king root was still installed as a system app but it showed the device as not having any root access witch i thought was weird but i just left it like that while i made a few phone calls but again half way through a phone call the device restarted it self again
this time when the phone started back up it showed the pixi 4 logo and then the alcatel logo and refused to move any further its just stuck on this screen. I looked on XDA for a fix but couldnt fine anything for my model the 9001X/D i found one page that said you can format using recovery mode
i held down the power and volume up buttons and got access to the reovery menu and done a factory install and then restarted the phone but again got stuck on the alcatel screen
i sent alcatel an email asking for a stock image to flash from recovery or something but i got no email from them i then tried to use the upgrade tool from the alcatel website witch i thought would do it the phone was found and the upgrade tool started but at 2% but then i get a red error saying failed to read some ingformation check phone status but the phone is turned off as per the instuctions and nothing is on the screen
i cant find a stock image anywhere cant get the tool to work when i goto recovery and tell the phone to reboot into bootloader mode to run fastboot its never worked even when the phone was working it would simply say waiting for devices on cmd also in recovery if i enable adb still finds nothing i have no idea what i can do to get anything working or reset the phone at all
does anyone know what i can do or have an image that would work anything at all my phone only like 2 months old and i dont know what todo as the stall is no longer in the mall to go back to

Random crashes

Hi everyone,
Someone asked me to fix his phone and i'm stuck. The S7 is crashing randomly (black screen) and after a crash, it cannot be booted until the battery is dead (even by pressing power +home or power + vol-) and charged again. I don't know how to fix it and i'm stuck at this point.
Here is the story behind it :
The phone wrote the famous "moisture" message and then won't boot up. He never put it in water. So he put it in rice but it didn't work. The owner of the phone took it to a fixing store in Thailand where they changed the battery. After a day, the phone crashed and we send it to Samsung Thailand who told us a high cost without explanations so they didn't fix it and we got it back.
Hopping someone can help me about this problem :angel:
Update :
A deep-clean flash () got me stuck into "no command" and pushing vol+/vol-/home didn't change anything, it just bootlooped.
So then i tried installing TWRP 3.1.1, it's a success but after installing LineageOS 14.1 and booting the phone crashed at bootlogo and won't boot up again...
Another Update :
I finally managed to get it working saturday, but it crashed just today and it's the same. It crashed in a lightweight app with no app running in the background. I'm thinking of a material problem :/
New update, still hoping someone know how to fix this:
I tried to flash stock firmware over and over but it keeps crashing at the end of the boot animation... I'll try an oreo firmware, hope it'll fix it

Question Poco X3 Pro randomly bricked

Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.

That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.

try flashing the stock rom again using miflashtool.

2D1fferent said:
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
Click to expand...
Click to collapse
I had this situation too 2 days ago after installing Magisk 24.3 , CusRom DF latest, Firmware 12.5.7. What i did was hit the power button for a sec immediately,and my device was back to normal untill now.

Antonio7489 said:
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
Click to expand...
Click to collapse
How is it now after awhile?

groovybanana21 said:
How is it now after awhile?
Click to expand...
Click to collapse
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.

Antonio7489 said:
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Click to expand...
Click to collapse
I see. I use this device since october last year, i never face any bug except that glitch screen even for a second,that gave me mini heart attack, lol..
So yes i flash stock MIUI13 again and stay on stock till now.

Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result

Bumaye961 said:
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Click to expand...
Click to collapse
HELP

Bumaye961 said:
HELP
Click to expand...
Click to collapse
You should flash MIUI again with Mi Flash Tool , if it still happens you should flash a custom rom,if you get the same result go to a repair center.

just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, safemode doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on

I recommend to flash stock rom through fastboot mode.

Bambo. said:
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, fastboot doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
Click to expand...
Click to collapse
That's indicates your mainboard is broken. claim your warranty for mainboard replacement or new phone replacement(in some region)

i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method

Bambo. said:
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Click to expand...
Click to collapse
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.

Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.

Atul10 said:
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Click to expand...
Click to collapse
try charging it overnight and retry even if it does not respond to charging, i did that too when mine stopped powering on although it only charged around 41%

Antonio7489 said:
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Click to expand...
Click to collapse
i know it might not be a softbrick but the charger case worked for me it might be a coincidence too because it is random most of the time it boots up randomly after restarting several times, when it does it can work for as little as some minutes or a couple of hours, to me it seemed like the rom got corrupted or something, im not an expert.

my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do

abdalla 22564 said:
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
Click to expand...
Click to collapse
No real answer till now 🫠