Database Info

Rooting and Flashing a custom ROM

I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.

Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist

mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App

Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate

mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App

Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008

mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App

No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy

mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App

antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck

The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.

^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot

MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App

Why ji6? What are the benefits other than the audience chip will work?

[GUIDE] From stock GB to Custom JB (Noob-friendly)

STOCK GB ALL THE WAY TO JB CUSTOM ROM
If you run Gingerbread, start from A directly
If you run un-rooted Jellybean, start from B
If you run rooted Jellybean with a custom kernel, start from C.
If you run rooted Jelly Bean without a custom kernel, start from B, but skip number 1 and 6.
You might want to read this before starting, it is optional though, but will give you a better idea of what you're doing.
GUIDE
This guide shall guide you through turning your suckish GB i9070 (not i9070p) to Custom ROM JB Awesomeness.
Unless your phone shipped from Russia, it probably has Gingerbread preinstalled... so, let's first Jellybeanize it.
A) JELLYBEANIZATION:
Download Odin3 from here. http://forum.xda-developers.com/atta...1&d=1341114315. Extract it into a folder.
Download Stock JB firmware from here. http://hotfile.com/dl/222710569/1f2...m-GT-I9070-TSR-I9070XXLQE-1365486223.zip.html . Extract it into a separate folder, you will get a .tar.md5 file.
Make sure you have Kies installed, but not running.
Turn your phone off, and boot into Download mode, this can be done by holding the Vol.Down+Home+Power buttons together at the same time, till it boots.
Press Volume up to continue. Plug in your phone (make sure it's at least 60% charged) . Wait till Odin recognizes (It should say something like COMORT... to the left).
Click on PDA and choose the firmware (.tar.md5) that you extracted in step 2. Click start.
Right now, a virus which will fry your phone's internals is being installed... Calm down, joke.
When your phone boots into JB, and Odin says "PASS". Unplug.
NOTE: There is a chance that you will get a bootloop ( i.e. Android won't boot ). No, no, no... your phone isn't broken! Simply reboot to stock recovery by powering off, then pressing Vol.Up+Home+Power buttons together and wipe data/factory reset. It'll boot nicely
Now, you are currently on a stock Samsung Jellybean firmware, which is not rooted. This basically means that you do not have access to modifying the system files in your ROM, which means that you cannot install any custom kernel, custom recovery or a custom ROM... In section B, you will learn how to gain root access, install a custom kernel with a custom recovery.
B) ROOTING, KERNEL & TWRP/CWM:
Download Shaan's root from here http://d-h.st/ook
Download Temporary cwm from here http://forum.xda-developers.com/show....php?t=1987313
Download CoCore + TWRP (TWRP is one of the two recoveries available, we will use it in this guide because it looks less intimidating, and it's touch-enabled ) from here http://forum.xda-developers.com/atta...8&d=1363518705
Place all 3(or 2 if you're rooted) zip files in your external SD card
Power off. Boot into recovery by holding Vol.Up+Home+Power.
By navigating via volume buttons, choose install zip from external sd card, and install root.zip... shouldn't take long.
In the same way install update.zip. Now in a few seconds, you will get a different screen, this is Clockworkmod recovery, albeit a temporary one..
In this recovery, go to install zip, then install zip from external sd, and choose CoCore+TWRP. After installation, keep going back until the main cwm screen, and hit reboot.
NOW, Everytime you boot into recovery (which is the way to backing up and installing custom ROMs) you will get TWRP.
Now, you are rooted, with a custom kernel, and TWRP ( a custom recovery). You can either stay on stock Samsung firmware, or continue through section C, and get yourself a custom ROM.
C) INSTALLING A CUSTOM ROM:
Download any custom ROM (Recommendations at the end of the thread) zip and place it in the root of your external (or internal, but i prefer ext.) sd.
Boot into recovery.
Navigate by touch, press backup, and slide as instructed to make a backup.
Go back to the main screen and choose install. If the zip has been placed in ext. sd. then press on external sd and choose the appropriate zip and slide to install. If placed in internal sd, then choose internal sd from the top and go to /emmc folder, and choose zip and install.
When finished, navigate to the recovery home, and press reboot sytem.
Frequently Asked Questions
Q- Which of the above will increase my binary counter?
A- None! Let me clarify how the binary counter is tipped. The only way the binary counter can be increased is if you flash anything that is non-official Samsung signed, via Odin.
Q- How do I unroot?
A- You can unroot simply by following the steps in section A and not continuing with the rest of the guide.
Q- I encountered a problem, what now?
A- If the problem is related to this guide and the steps followed in this guide, then post it here, I'll try to help when possible. If you encountered a general problem not related to this guide, please post a thread in the Q&A/Troubleshooting section.
ROM Recommendations
If you want a fully stable ROM, with everything working, Cyanogenmod or Cyanogenmod based ROMs currently do not fit the cirteria, as they some bugs still remain in these. So, you may try one of the stock based ROMs.
[AOSP Themed] - JellyMod - by martin_carpio17 Link here
[S4 Themed] - Light JB - by petraru1 Link here
[AOSP Themed] - Pure Vanilla - by ikaster17 Link here
[Xperia UI Themed] Galaxperia - by Achyut Link here
However, if you'd still like to go for most change, and don't mind the small bugs, then you may try Cyanogenmod or the Cyanogenmod based ROMs below.
Cyanogenmod 10 - by diego-ch and other contributing developers Link here
MIUI v4 - by fedevd Link here
Paranoid Android Port - by nlygamz Link here
Cyanilla - by ikaster17 Link here
This is basically it for this tutorial! Finally eh? But really now, all the above is very very easy once you get used to it, I mean, all the sections in the guide, A, B and C can all be done in 5 minutes, but I've simplified everything as to suite everyone's experience.
Hopefully this guide was useful for you...

If I made any mistakes with this, please correct me

Odp: [GUIDE] From stock GB to Custom JB (Noob-friendly)
That would be very usefull
If only tons of familiar topics wasn't already created ...
tapatalked

rajman said:
That would be very usefull
If only tons of familiar topics wasn't already created ...
tapatalked
Click to expand...
Click to collapse
Excuse me for trying to contribute.

panda00 said:
Excuse me for trying to contribute.
Click to expand...
Click to collapse
You have done a good job. Remember, haters gonna hate
Sent from my GT-I9070 using xda premium

Plus, I provided this for newbies who have little to no idea about rooting and the works...

Odp: [GUIDE] From stock GB to Custom JB (Noob-friendly)
Brainiac.shri said:
You have done a good job. Remember, haters gonna hate
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Yup, thanks button is to mainstream.
Hating is way more vintage
tapatalked

Added and corrected some things... Thanks R_a_z_v_a_n for the corrections.

Your welcome!

there is anyway to add brazilian portuguese language?

fromanbr said:
there is anyway to add brazilian portuguese language?
Click to expand...
Click to collapse
I don't think so... until a official JB firmware with the language is released.

Up.. since people are still asking how to root and etc.

Up

A million thanks for the guide .. I've installed Jetmod 4.0 and it's running fine. My only concern is that I created a backup of my previous ROM in the internal storage and now just 33MB space is available for installation of apps. Can you please tell me how to 1. Remove the backup, or 2. Move it to the external storage ?
Thanks !

Go to "my files" - internal (sdcard0 I suppose) select what file u want to move an move to external memory (sdcardExt).

R_a_z_v_a_n said:
Go to "my files" - internal (sdcard0 I suppose) select what file u want to move an move to external memory (sdcardExt).
Click to expand...
Click to collapse
I have already tried that, but I am not able to identify the backup. I had used to TWRP to backup and then flash JellyMod. I had looked up on some threads that the backup will be in SD -> TWRP -> Backups (or something similar to this), but there is no such folder in my phone.
:crying:

ttrublu said:
I have already tried that, but I am not able to identify the backup. I had used to TWRP to backup and then flash JellyMod. I had looked up on some threads that the backup will be in SD -> TWRP -> Backups (or something similar to this), but there is no such folder in my phone.
:crying:
Click to expand...
Click to collapse
Look for it using Root Explorer (download the app from the play store).

ttrublu said:
I have already tried that, but I am not able to identify the backup. I had used to TWRP to backup and then flash JellyMod. I had looked up on some threads that the backup will be in SD -> TWRP -> Backups (or something similar to this), but there is no such folder in my phone.
:crying:
Click to expand...
Click to collapse
in your file manager browse to ext_sd. from within ext_sd you should have a folder labeled nandroid..
also, by default, the backups should be labeled/dated accordingly..
you could also get details on each file from within file manager that will give you more specific info. date created, etc..
hope this helps..

Thanks guys, but I think I didn't make myself clear. The backup is present in the 2GB memory reserved for installing apps. How do I access that storage and remove the backup? I'm an android beginner, so pls have patience with me.

ttrublu said:
Thanks guys, but I think I didn't make myself clear. The backup is present in the 2GB memory reserved for installing apps. How do I access that storage and remove the backup? I'm an android beginner, so pls have patience with me.
Click to expand...
Click to collapse
in the "My Files" folder on your phone..
you will see All Files.. select it and youll see extSdCard and sdcard..
go to sdcard to navigate to your back up files after that move them to your memory card extsdcard..
voila.. free space..

Unique ECHOE ROM Flashing-Guide accepted by the Echoe ROM TEAM

Official:
Unique ECHOE-ROM Flashing-Guide
since v5 to v37 and up, still the best guide!
Always have a NANDROID Backup before changing anything on your device!
Please make a backup of your APP´s with e.g. Titanium-Backup to restore them after flashing!
Also it is advisable to make a backup of your contacts!
Note: You might have ROOT before getting custom recovery (CWM, TWRP, PhilZ) to work!
Flash MGA based Pre-Rooted ROM from DjeMBeY or ROOT your Phone to get it!
Users with NEW Bootloader simply flash a MI8 or higher pre-rooted ROM!
You have to build your System completely new to get a 100% working ECHOE ROM!
No "dirty flash" without wipe! Make it like I describe now or leave this Guide immediately!
​
You need the following for your Galaxy S4 I9505:
Device fully charged! =D--._.-----
Samsung USB connection cable to connect phone to PC
Micro SD-Card Reader for your PC (only if you have a micro-SD Card in the phone)
Samsung USB driver for PC Click here!
Latest Philz Touch Recovery Click here!
Odin (latest) ........................ Click here!
ECHOE ROM ....................... Click here!
Modem Collection .............. Click here!
Perhaps CSC Changer App Click here!
DOWNLOAD MODE:
(for Odin operations (.tar.md5 Files))
NOTE: You might have to extract downloaded .RAR file to get the inserted .tar .md5 file!
From switched OFF phone push the power button until the S4 vibrates, IMMEDIATELY push "volume DOWN" to enter download mode.
Push volume UP when you be asked!
Connect the Phone to PC with USB connection cable!
RECOVERY MODE:
(for Recovery operations (.zip Files)):
From switched OFF phone push the power button until the S4 vibrates, IMMEDIATELY push "volume UP" to enter recovery mode.
Process:
Prepare Phone:
1: ROOT YOUR PHONE like described above (if it´s not already rooted)!
2: Flash Philz Touch Recovery with Odin (as "PDA" or new Odin as "AP") or SGS4 flasher APP!
... Look at the above line "RECOVERY MODE" in this Guide how to start!
... If Philz Recovery asks you to fix ROOT (after you choose Reboot Now) choose NO !!!
Prepare SD-Card:
If you don´t have a Micro-SD Card just copy the downloaded EchoeRom ZIP to the internal SD!
3.: Switch OFF your phone and take out the micro SD-Card
4.: Put the micro SD-Card in a card reader and delete the folder ".android_secure"
.... It might work without deleting the ".android_secure" if you come from older ECHOE ROM Version (not tested by me)
5.: Copy the downloaded EchoeRom ZIP to the micro SD-Card
6.: Put the micro SD-Card back into the phone (DONT BOOT UP THE PHONE WITH INSERTED micro SD-Card, ".android_secure" is written again)!
Cleaning Phone:
7.: To completely clean your S4 and get rid of all older remaining´s you now start into Recovery Mode
... Look at the above line "RECOVERY MODE" in this Guide how to start!
8.: In the Settings of Philz Recovery choose:
8a: Advanced: Wipe Dalvic Cache
8b: Wipe Cache Partition
8c: Wipe Data/Factory Reset / Factory Reset
8d: Wipe Data/Factory Reset / "Clean before flash new ROM"
... Note: You have to flash a new ROM after doing point 8d !!!
... Stay into the Philz Recovery and read ahead!
Flashing ECHOE ROM:
9.: Because you stay into Philz Recovery hit the option "Install ZIP" then hit "choose zip from/storage/sdcard1" or internal SD and choose the EchoeRom ZIP
10.: After the flashing process finished go back to main menu and choose "Reboot System Now"
..... If Philz Recovery asks you to fix ROOT (after you choose Reboot Now) choose NO !!!
First Start:
11.: The first time the phone boot up take about 3-4 minutes
12.: After the phone has started do furthermore NOTHING for about 5 minutes (let the system set up in calm)
13.: Switch OFF the phone with the power-button
Flashing another Modem for your Echoe ROM Version (if the included modem is not working properly):
14.: Boot device into Download-Mode from switched off device (important)!
15.: Connect Phone to PC with the Samsung USB Cable!
16.: In Odin remove the "Auto Reboot" hook
17.: In Odin click on PHONE or newer Odin click on CP, load your Modem and press START
18.: Wait 3-4 minutes till there is a message: All threads completed. (succeed 1 / failed 0)
19.: Hold Power-Button for 10 seconds till phone resets (you feel the vibration)
Ready for take off!!! :laugh:
Phuuu... that was a ride... everything clean and new now!
Enjoy this famous ECHOE ROM!
Hit the :good:THANX Button if you enjoy!
.

Great guide and should help a lot of people out! Thanks for this!!
Sent from my GT-I9505 using XDA Premium 4 mobile app

I can't find an .android_secure folder anywhere on my SD card.
Just checked and the checksum is correct:
MD5 (/Users/Hate/Downloads/Echoe Illusion Rom v6_28Oct.zip) = 0fba4efafe95457a934cb50946bf552e
Same one as listed at http://d-h.st/AX5 the download link.
Prehaps the upload is corrupt?
Can anyone provide me with an alternative link? I don't want the themed version.
I'm trying downloading it with a different browser however I really cant see chrome being any problem at all?
Please someone help, I'm stuck with an expensive brick currently Well semi-brick :'(
I'd ideally like to fix it as its my only alarm clock!
Thanks

Hmmmmmm.
Just downloaded the themed version,
Wiped everything as instucted ( noticed it said Formatting external_sd/.android_secure despite me checking many time before and its not there, not even a hidden file or folder )
Getting the exact same error Can't open... bad...Can anyone help this is driving me crazy!
All the md5 hashes match
Thanks

Hey I cant seem to get my phone to stop losing signal when the screen is off. I have flashed the modem that the firmware checker says is good for my phone but its still not working any ideas.

HollowVegitoRay said:
Hey I cant seem to get my phone to stop losing signal when the screen is off. I have flashed the modem that the firmware checker says is good for my phone but its still not working any ideas.
Click to expand...
Click to collapse
Did flashed the ROM like described above?
Did you use the inbuilt Faux Kernel?
Have you flashed the Modem like described in Point #18 ?
What is your Bootloader (old or new (with or without Knox)?
This works flawless! Many people have confirmed! :good:
This flashing method is beyond any doubt, it MUST work if you dont have made thinks wrong!

philipkroberts said:
I can't find an .android_secure folder anywhere on my SD card.
Just checked and the checksum is correct:
MD5 (/Users/Hate/Downloads/Echoe Illusion Rom v6_28Oct.zip) = 0fba4efafe95457a934cb50946bf552e
Same one as listed at http://d-h.st/AX5 the download link.
Click to expand...
Click to collapse
Never mind, this folder is written from the System itself (after first booting up).
Whats the problem with your downloaded ROM?
Prehaps the upload is corrupt?
Can anyone provide me with an alternative link? I don't want the themed version.
I'm trying downloading it with a different browser however I really cant see chrome being any problem at all?
Please someone help, I'm stuck with an expensive brick currently Well semi-brick :'(
I'd ideally like to fix it as its my only alarm clock!
Thanks
Click to expand...
Click to collapse
Flash a stock ROM with Odin first and then go ahead!
For new Bootloader you have to flash stock .tar.md5 XXUEMJ5 Firmware with ODIN.
For old Bootloader you have to fllash stock .tar.md5 XXUEMGA Firmware with ODIN.
Flash stock ROM with my Guide here: http://forum.xda-developers.com/showthread.php?p=46399517#post46399517
So you should have a starting point to continue with the ECHOE ROM Flashing guide!

fAiLOfax said:
Did flashed the ROM like described above?
Did you use the inbuilt Faux Kernel?
Have you flashed the Modem like described in Point #18 ?
What is your Bootloader (old or new (with or without Knox)?
This works flawless! Many people have confirmed! :good:
This flashing method is beyond any doubt, it MUST work if you dont have made thinks wrong!
Click to expand...
Click to collapse
I flashed like described in point 18. I don't know what bootloader I have and I'm not sure about the kernel.

HollowVegitoRay said:
I flashed like described in point 18. I don't know what bootloader I have and I'm not sure about the kernel.
Click to expand...
Click to collapse
Did you ever flashed a ROM higher than MGA or MH1 you have the NEW Bootloader!
Flash a stock ROM with Odin first and then go ahead!
For new Bootloader you have to flash stock .tar.md5 XXUEMJ5 Firmware with ODIN.
For old Bootloader you have to fllash stock .tar.md5 XXUEMGA Firmware with ODIN.
Flash it like I described in my Best ROM Flashing Guide (in my Sig)!
Then continue with this ECHOE ROM Flashing Guide!

Hi, really like your threads and just discovered this one.
I have a android.secure folder on my external sd card but am wondering, why I can't just delete that one, boot into recovery, wipe and flash the new ROM. In your steps you recommend to take out the card, put it into a card reader, delete the folder, put ROM on external sd card, put card in phone and boot into recovery. Wouldn't that be the same as if I delete it on my phone with a file Explorer and booting into recovery?
Or is this folder recreated while shutting the phone down?
Also, could you explain a bit why this particular folder can make problems?
Thanks in advance!!
---------------------------------------------
If you like Techhouse you can listen to my tracks here:
www.facebook.com/mister.adl

adl said:
Hi, really like your threads and just discovered this one.
I have a android.secure folder on my external sd card but am wondering, why I can't just delete that one, boot into recovery, wipe and flash the new ROM. In your steps you recommend to take out the card, put it into a card reader, delete the folder, put ROM on external sd card, put card in phone and boot into recovery. Wouldn't that be the same as if I delete it on my phone with a file Explorer and booting into recovery?
Or is this folder recreated while shutting the phone down?
Also, could you explain a bit why this particular folder can make problems?
Thanks in advance!!
---------------------------------------------
If you like Techhouse you can listen to my tracks here:
www.facebook.com/mister.adl
Click to expand...
Click to collapse
I know mate!
I couldn´t delete the .android.secure folder from phone within! I think its used from System and should not be deleted while the system is runnig.
I don´t know what errors/problems this folder could make, I always removed it first.
I think friedrich420 has written that it should be deleted because of making problems when switching from stock ROM to e.g. ECHOE ROM!

SLIM - Yes, Full - No
Hi!
Huge Fan of Echoe Rom. I have a very weird issue with the echoe celstial voices goint to echoe illusion v7. Flashed celestial voices and worked like a charm. Then Illusion V6 Full came up. So downloaded and flashed it. Again worked like a charm. Then I tried the slim version and from there, something weird happened. echoe illusion v6 slim with no kitchen worked out fine, but game me random resets and freeze. So i tried goin back to full. But I cant flash the full version. But can go back to slim without a problem. tried it 20 times now but still getting stucked at boot logo. then v7 came out and still same results.
Cant post to echoerom thread directly due to restrictions. Please advice as to what should i do. Thanks in advance.

fAiLOfax said:
I know mate!
I couldn´t delete the .android.secure folder from phone within! I think its used from System and should not be deleted while the system is runnig.
I don´t know what errors/problems this folder could make, I always removed it first.
I think friedrich420 has written that it should be deleted because of making problems when switching from stock ROM to e.g. ECHOE ROM!
Click to expand...
Click to collapse
Thanx mate!
Will try your way for Echoe 7, even i never encountered any trouble. :fingers-crossed:

adl said:
Thanx mate!
Will try your way for Echoe 7, even i never encountered any trouble. :fingers-crossed:
Click to expand...
Click to collapse
:laugh:
BTW: i like to get "thanx" if I could help you!

cut

Sorry, me with another question regarding external sd + android_secure.folder:
I should take out the external sd, delete the folder and put the ROM on the external sd card. Now when i boot right into revovery will the folder be created again? Cause then it would make more sense to leave external sd card out and put the ROM on internal sd card and flash from there.
As I usually do a fullwipe, including formating internal sd card the ROM would be formated as well. So the ROM needs to be on the external sd card, but then again the android_secure folder might be created while booting up in recovery...i hope you understand my dilemma. :silly:

adl said:
Sorry, me with another question regarding external sd + android_secure.folder:
I should take out the external sd, delete the folder and put the ROM on the external sd card. Now when i boot right into revovery will the folder be created again? Cause then it would make more sense to leave external sd card out and put the ROM on internal sd card and flash from there.
As I usually do a fullwipe, including formating internal sd card the ROM would be formated as well. So the ROM needs to be on the external sd card, but then again the android_secure folder might be created while booting up in recovery...i hope you understand my dilemma. :silly:
Click to expand...
Click to collapse
Man! The folder is created from the Android System not from recovery!
Make it like I said in the Guide and that's it!

fAiLOfax said:
Man! The folder is created from the Android System not from recovery!
Make it like I said in the Guide and that's it!
Click to expand...
Click to collapse
DUUUUDE!!
Thanks so much for the hint with android_secure folder! #
I had this weird issue that after flashing Echoe ROM Slim Version 3-6 that while booting up for the first time after flashing 4 apps where installed which where totally bloat stuff (such as "mytaxi" and some other shi*t)
I have a "free" Phone, so i always wondered what is happening as this couldn´t come from any "carrier" service. I also formated my external sd card but the problem was still there when i installed Slim V6.
With your methoed this time NO bloat App was installed after the reboot!
Thank you so much, i finally figured out what was causing this! :good:

adl said:
DUUUUDE!!
Click to expand...
Click to collapse
Thanks so much for the hint with android_secure folder! #
I had this weird issue that after flashing Echoe ROM Slim Version 3-6 that while booting up for the first time after flashing 4 apps where installed which where totally bloat stuff (such as "mytaxi" and some other shi*t)
I have a "free" Phone, so i always wondered what is happening as this couldn´t come from any "carrier" service. I also formated my external sd card but the problem was still there when i installed Slim V6.
With your methoed this time NO bloat App was installed after the reboot!
Thank you so much, i finally figured out what was causing this! :good:
Click to expand...
Click to collapse
Nice mate!
That makes me happy! :good:

I have this modem installed now, can i update to this rom without having to update modem? Or still needed? And can i TB everything back?
And will this modem break my sounds? Since ive seen some comments of users breaking there sound ...
Sent from my GT-I9505 using app: XDA Premium and rom: CarbonRom

[Tronsmart TS7 - MTK6582] ROOT / CMW Recovery / Stock Rom / Tips

Hi,
there are some different MTK Chipsets in the Tronsmart TS7.
If your device is a MTK6589 take a look at here
For the newer device based on MTK6582 i want to share my experience, mine is a 4GB version:
Root
- Activate USB debugging
- Download the Root Genius from here to your PC
- Start the 'root genius' and root the phone ...
- Install SuperSU
- Install a Filemanager with root permissions
- Move the KingUser.apk at /system/app/ to everywhere for backup or delete it
but don't deinstall the King User App
- Reboot phone
- Start SuperSU -> the SU Binary will get to update (method -> normal)
CWM Recovery
- Download the TS7_4G_CMW.rar from here
- Download the MTK Droid Tool 2.51 (or higher) & start it
- Click the root button -> permit the ADB Shell root access at SuperSU
- Go to 'root, Backup & recovery' -> activate 'To Use boot from phone'
- Click Button 'Recovery & Boot'
- Question "to make CWM recovery automatically ?" -> No
- Select the downloaded Gacier-TS7_130805__recovery_130815-142418.img
- Flash it & reboot to recovery
Remove the Google-Search-Bar from Homescreen
- Rename/Move/Delete these files, which are located in /system/app
QuickSearchBox.apk
QuickSearchBox.odex
Run Navigon Select (German D1 only)
Read this
Stock ROM released on 28/12/2013
This is not a new Rom, it's the rom on phone on factory default
[G820_C1_F1_Tronsmart_V0.2_20131127]
Flashing on Stock Recovery, look at here
How to flash the Rom in CWM:
Take care, flash on your own risk, just flash it, if you know, what you do !
This method remove your root-access and any mods in your build.prop[/I]
- Unrar the downloaded firmware
- Repack all files in subdir 'update_1226' as a new .zip archiv
- Rename the .zip to 'Update.zip'
- Download the programm 'Auto-Sign' from here
- Unzip the Auto-Sign
- Move your 'Update.zip' into the Auto-Sign Folder
- Start Auto-Sign & sign the Update.zip
- Flash the signed Update.zip in CWM
For Auto-Sign you need .net Framework 3.5 & Java
Very Thanks to the Users of htcmania

thanks for sharing!:fingers-crossed::fingers-crossed:

Paasword?
Tommes24 said:
Hi,
CWM Recovery
- Download the TS7_4G_CMW.rar from here
...
Click to expand...
Click to collapse
What is the reason of password protected download?
Can you tell the password, please?

communion lloctob
OraXdaDevelopers said:
What is the reason of password protected download?
Can you tell the password, please?
Click to expand...
Click to collapse
the pass is: geekbuying.com
El Foro en español es:
http: //ww w.htcmania.com/showthread.php?p=11415545

Thx...
I think does not longer needed, because I have ported online with MTK Droidtool own version 6.0.4.4. for my MT6582 phone

Updates in 1. Posting

thanks a lot, will try this as soon as i get my ts7.

Edit :
Update in 1st Post --> factory default Stock Rom available

I cant flash a new, custom rom, because is rar, and the cwm want zip, and the site is say too: "Copy the update.ZIP to tf card"
where is the zip?

Hi!
Here is a new rom and cwm in the "needrom" portal.

konigjanos said:
I have a big problem: i install a cwm recovery, its work fine, but i flash a wrong rom, (for mtk6589 ) and the phone in bootloop. Please, somebody send me an tronsmart ts7 4 gb mtk6582 cwm flashable rom, or an nandroid backup. Very big thanks! konigjanos @ gmail .com
Click to expand...
Click to collapse
Dont worry, try this
www(dot)htcmania(dot)com/showthread.php?t=732745

Regarding the new update, what are the changes? Also, I have installed CWM. Is that file compatible with CWM?

update in 1st Posting

Thanks for the guide
However looking at the contents there appears to be a recovery folder. Would it be correct to say that if I were to flash this zip as it is, it will replace my current CWM recovery?
Also, has anyone actually installed the update? Any changes noticed so far?
Sent from my TS7 using xda app-developers app

i have a question regarding the 3g frequencies of the phone:
it says that it supports the 850 wcdma frequency, however someone i spoke to told me that he checked and the phone doesn't support 850, but 900 wcdma instead. can anybody here check it and see if they get the same result?
thanks.

So I managed to put together a update.zip somehow and managed to update the phone. Disappointing thing is I don't see much changes, the phone is still as sluggish as ever. Also, I lost root, and Root Genius can't get back root, so I have restored my CWM backup.
This phone really needs 4.4 Kitkat stat!

Logi_Ca1 said:
So I managed to put together a update.zip somehow and managed to update the phone. Disappointing thing is I don't see much changes, the phone is still as sluggish as ever. Also, I lost root, and Root Genius can't get back root, so I have restored my CWM backup.
This phone really needs 4.4 Kitkat stat!
Click to expand...
Click to collapse
The Rom has no upgrade ... because our Tronsmart TS7 this date with the latest version [G820_C1_F1_Tronsmart_V0.2_20131127]
The flash ROM is only necessary to leave the phone to factory settings and remove the ROOT
you should try the VROOT, with this method you do not have to delete the system APK's
Only download and ready SuperSU the application of the Play Store
the procedure in the Post in Spanish of [HTCMania]
The administrator of this post should update the 1st post and add a second method ROOT
EDIT:
In the post HTCMania, is the link of the Rom already signed!
Ready to flash with CWM
I can not post links because I'm new to XDA

Logi_Ca1 said:
So I managed to put together a update.zip somehow and managed to update the phone. Disappointing thing is I don't see much changes, the phone is still as sluggish as ever. Also, I lost root, and Root Genius can't get back root, so I have restored my CWM backup.
This phone really needs 4.4 Kitkat stat!
Click to expand...
Click to collapse
According to Kristin from geekbuying.com:
"Its is the first Stock Firmware for MTK6582 TS7. No changelog"
original: http://blog.geekbuying.com/index.php/2013/12/31/ts7-mtk6582-upgrade-firmware-with-instruction/comment-page-1/#comment-105103

Very thx, I've updated the 1st post

BTW what is up with the RAM usage of this phone? Its nearly stock android but almost half the RAM is used after boot.
Sent from my TS7 using xda app-developers app

Turbo-X Tablet Hive VI---Google Play Services NEEDED!

Hello guys, I'm looking for Google Play Services for this tablet it's with Intel and Android 4.4.4. Here are some screenshots of all info. I just can't find working Services. I don't need root, but just Services. It was bought without Google Play Store and Services. I hope you can help me. Thanks.

yanis15 said:
Hello guys, I'm looking for Google Play Services for this tablet it's with Intel and Android 4.4.4. Here are some screenshots of all info. I just can't find working Services. I don't need root, but just Services. It was bought without Google Play Store and Services. I hope you can help me. Thanks.
Click to expand...
Click to collapse
How about flashing gapps?

AzrulHisyam said:
How about flashing gapps?
Click to expand...
Click to collapse
Yes i thought about this, but how?? I think i need custom recovery for this, but can't install one. If there is other way of installing I will be happy. Thanks.

I don't know any other way to install gapp except using recovery.
Install recovery and find your phone gapp and flash using recovery

Hello guys, just wanted to let you know that after many hours of hard work I finally managed to get Google Play Services and root working. If anyone ever needs help with this particular model or any x86 based Android tablet/phone with unknown brand you can send me private message or answer in this thread. The problem with this type of devices is that no one makes custom recovery for them that's why I had to load a temporary one. Here is a link. By following the guide there you will get in recovery pretty much 99% of time. From there it's easy just flash SuperSU package and GApps. The best and only working x86 (Intel Processors) GApps with this version of CWM recovery are Franken GApps. You flash them and you are done. You now have working, licensed and usable tablet/phone! Screenshots below! :highfive:

need help plz...
hello my friend, i just bought turbo x hive vi and i would like to help me.. i cant root it alone... from sTART i cant understunt what is the wright trigger... :/

kokkipe said:
hello my friend, i just bought turbo x hive vi and i would like to help me.. i cant root it alone... from sTART i cant understunt what is the wright trigger... :/
Click to expand...
Click to collapse
Hey, I am sorry for the late response. I was away from XDA for a while.
1. To root I can't remember exactly, but there are a few ways I think. First, you can use Framaroot to root it or (recommended) you can directly push SuperSU package from the link I have given.
2. You download this GAPPS package. The download link is in the bottom of the post. You can also download a SuperSU package (ZIP) from here.
3. I see you have followed the instructions to some point. Here let me explain: First you connect your tablet with USB cable to the computer. Second you unzip the downloaded file and run the batch file. You then type "ACCEPT". Then you type "5" to run CWM recovery. Then you type "T4" to chose the forth option to load the recovery. This is basically a program that loads a recovery to your tablet without installing it. Your tablet should now reboot into CWM recovery. Be careful to not disconnect the tablet while you are performing operations since there is almost no way to recover from brick!
4. I guess you are at least a little familiar on how to work with recovery. In case you don't know: First - you very carefully navigate with the volume buttons up and down. You then go to install zip>from sd card>UPDATE-SuperSU-v2.65-20151226141550.zip. You then wait a second for the file to be flashed. You now have root. Second - you again navigate with volume buttons and go to install zip>from sd card>FrankenGApps-x86-20140826.zip. You again wait for a second. Now you will have successfully flashed GAPPS. You then very carefully navigate to reboot command and press the power button.
5. Tips:
- be very careful to not disconnect the tablet while flashing;
- backup any important information;
- ask me before you do anything which I have not described so you can be safe from bricking;
*In case the recovery says something like "Not enough space to install zip" or something similar, please, write in this thread so I can help you.
Good luck!

yanis15 said:
Hey, I am sorry for the late response. I was away from XDA for a while.
1. To root I can't remember exactly, but there are a few ways I think. First, you can use Framaroot to root it or (recommended) you can directly push SuperSU package from the link I have given.
2. You download this GAPPS package. The download link is in the bottom of the post. You can also download a SuperSU package (ZIP) from here.
3. I see you have followed the instructions to some point. Here let me explain: First you connect your tablet with USB cable to the computer. Second you unzip the downloaded file and run the batch file. You then type "ACCEPT". Then you type "5" to run CWM recovery. Then you type "T4" to chose the forth option to load the recovery. This is basically a program that loads a recovery to your tablet without installing it. Your tablet should now reboot into CWM recovery. Be careful to not disconnect the tablet while you are performing operations since there is almost no way to recover from brick!
4. I guess you are at least a little familiar on how to work with recovery. In case you don't know: First - you very carefully navigate with the volume buttons up and down. You then go to install zip>from sd card>UPDATE-SuperSU-v2.65-20151226141550.zip. You then wait a second for the file to be flashed. You now have root. Second - you again navigate with volume buttons and go to install zip>from sd card>FrankenGApps-x86-20140826.zip. You again wait for a second. Now you will have successfully flashed GAPPS. You then very carefully navigate to reboot command and press the power button.
5. Tips:
- be very careful to not disconnect the tablet while flashing;
- backup any important information;
- ask me before you do anything which I have not described so you can be safe from bricking;
*In case the recovery says something like "Not enough space to install zip" or something similar, please, write in this thread so I can help you.
Good luck!
Click to expand...
Click to collapse
Hello there,
Sorry for the off topic.
I also have the same tablet and I managed to do all the things listed above.
I was trying to update the Android on this thing by flashing a ROM of a very similar tablet (hardware-wise) and I semi bricked it but I managed to recover through the ECU shell(!). I have every partition in img using dd.
The thing is. Do you have any resources about a new ROM? I found the anzhen4_mrd7 source files on GitHub and I'm trying to build a CM build. Downloaded the source code etc.
If you want to collaborate send me a PM

ChrisAr said:
Hello there,
Sorry for the off topic.
I also have the same tablet and I managed to do all the things listed above.
I was trying to update the Android on this thing by flashing a ROM of a very similar tablet (hardware-wise) and I semi bricked it but I managed to recover through the ECU shell(!). I have every partition in img using dd.
The thing is. Do you have any resources about a new ROM? I found the anzhen4_mrd7 source files on GitHub and I'm trying to build a CM build. Downloaded the source code etc.
If you want to collaborate send me a PM
Click to expand...
Click to collapse
Hello,
unfortunately I am not that good with Android. I don't know how to build ROMs etc., but I may learn one day. Sorry, but I can't help you.