Database Info

Need serious help immediately

I tried to flash a aokp rom and before flashing made a back up. Now when I flashed the rom and rebooted the phone im stuck at samsung boot. I can get into recovery. At first it was a messed up recovery i tried to get to an old rom and reinstalled inimitable on reboot still stuck at samsung but can get into red recovery. Backup when reinstalling says cant mount system/! please help me asap I cant do anything I need my phone I am in panic mode.

Have tried reflashing The ROM again...or if you just want to go back to stock see my signature for links to the one click method
...btw your in the wrong section to post this...
The OP for aokp does state to flash twice...did you?...first time with wipes, then you can pull battery ...go back to cwm and reflash...again.

going back to stock is your way. clear all that crap out

http://forum.xda-developers.com/showthread.php?t=1524081

Post one to stock.....
Post two to put cwm back on....
Read with detail...the thread I provided....

Your probably going to need to go back to stock, but just so you know, flashing any ICS rom while on Gingerbread bootloaders will get you a "Messed up recovery" You'd have to flash ICS bootloaders, but doing that means you can't flash any non ICS roms, I personally still have a rainbowed recovery on the off chance I want to flash GB rom.

soulysephiroth said:
Your probably going to need to go back to stock, but just so you know, flashing any ICS rom while on Gingerbread bootloaders will get you a "Messed up recovery" You'd have to flash ICS bootloaders, but doing that means you can't flash any non ICS roms, I personally still have a rainbowed recovery on the off chance I want to flash GB rom.
Click to expand...
Click to collapse
We have no ics boot loaders...froyo boot loaders make the recovery look funky...gingerbread boot loaders fix that problem and can be used with froyo, gingerbread and ics ...not trying to be rude or a jerk just informing you
Sent from my SGH-I997 using XDA

Actually the "messed up" or rainbow recovery is from the lack of gingerbread boot loaders, just figured this out this morning when I attempted to flash aokp uniporn. Once I did the heimdall one click with bootloaders checked (gingerbread boot loaders) I was able to successfully flash the aokp rom and recovery works perfectly. Its really better not to reply when one does not know what they are talking about oh and I was still able to reflash a gingerbread rom as well although I probably won't go back to gingerbread again since aokp is the **** and runs super smooth
Sent from my SGH-I997 using xda premium

Please move this thread from the Development Section.
edit- Thanks for moving it.

Sorry about posting so quickly in wrong section. I just know the guys who post in here are pros. I used heimdall and everything is back to stock, no superuser. Should that be right, am I now not rooted? I havent tried to boot into recovery, but I think I have it still. Can I just follow root methods if I want to go back to root? Thanks again.

I my experiences, I've noticed our phones use a form of "Cumulative" Upgrade system, where You have to essentially go from Froyo to GB to ICS or things go haywire when you actually start using your ICS Rom..
I've tried using Heimdall to flash back to stock, but it doesn't seem to fix all my files from time to time, so I still use GTGs Ultimate Unbrick, and once it starts up as you're in Recovery Mode do a Factory Reset/Wipe Cache Partitions, it helps with not having the "Google Authentication Failed".
It's a long process from start to finish either way, so i figure save yourself the hassle for the long run and wipe it fresh...

I used heimdall without clicking the GB bootloaders checkbox. Upon reboot after sucessfully flashing everything, my phone shows the rainbow color thing then boots normally. I have no seen any issues other than that, however I only got it back up and running about an hour ago. I will see as the day progresses what happens. I just would like to know where I go from here to reacquire root priveleges. When I try to boot into recovery with the button combo I get a rainbow colored screen and nothing else showing, should I re-run heimdall with gb bootloaders box checked?

IME, one flash will lock on Samsung logo, 3 finger back to recovery, wipe everything, flash the rom again and flash the gapps and it would have been fine...
I have that happen everytime I have flashed an AOKP ics..it always works out fine..
Those instructions are in most of the OP's...
Its very important to read that and have an understanding of what exact steps there are before you just start flashing away...

drnecropolis said:
IME, one flash will lock on Samsung logo, 3 finger back to recovery, wipe everything, flash the rom again and flash the gapps and it would have been fine...
I have that happen everytime I have flashed an AOKP ics..it always works out fine..
Those instructions are in most of the OP's...
Its very important to read that and have an understanding of what exact steps there are before you just start flashing away...
Click to expand...
Click to collapse
Upon flashing the first time i did reboot into recovery but it was so buggy i couldnt see what to select. I am back to non rooted stock i believe now but when trying to get to recovery it just hangs on a rainbow like screen.
Sent from my SAMSUNG-SGH-I997 using XDA

Cjohns8792 said:
Upon flashing the first time i did reboot into recovery but it was so buggy i couldnt see what to select. I am back to non rooted stock i believe now but when trying to get to recovery it just hangs on a rainbow like screen.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
I would use the one click heimell run it twice on the 2nd time check the box for bootloaders....

bigjoe2675 said:
I would use the one click heimell run it twice on the 2nd time check the box for bootloaders....
Click to expand...
Click to collapse
It actually doesnt allow me to select it. The box is "greyed" out yet says phone connected and ready.

Cjohns8792 said:
It actually doesnt allow me to select it. The box is "greyed" out yet says phone connected and ready.
Click to expand...
Click to collapse
Aft your 1st flash...dont close program...but put your phone back into download mode again and then it should allow you to check the box...then..

You probably can't mount until you format system, data, and cache. I had this issue before as well, Go to mounts and storage and Format system, data, and cache and then try mounting again.

Axiomkid said:
You probably can't mount until you format system, data, and cache. I had this issue before as well, Go to mounts and storage and Format system, data, and cache and then try mounting again.
Click to expand...
Click to collapse
Can't access recovery, it just shows a full rainbow screen.

Cjohns8792 said:
Can't access recovery, it just shows a full rainbow screen.
Click to expand...
Click to collapse
my suggestion is do the method i mentioned..

Alright guys I'm stuck :( (soft brick? ) please help

I did a lot of reading before I got into hacking my s3. I'm pretty new to the android development of Samsung phones, so the terms Odin and kexec are a little unfamiliar to me. I've owned and rooted and flashed 4 different HTC phones within the past 2 years successfully. But Samsung is a new ball game for me. And to my limited knowledge, I'm stuck and I'm hoping you guys can help me out.
Here's the process of what I did to my phone that got me to where I am.
1. I was able to root my phone and flash the custom recovery using using Adam outler's program successfully
2. I downloaded ez unlock boot loader from the play store and then successfully unlocked my boot loader
3. I tried to make a nandroid but I didn't know how to with the recovery I had. So I installed Rom manager and flashed cwm.
4. I downloaded the custom bean build 8 ROM, fully wiped, and attempted to flash the Rom with the Rom file sitting on the root of my phone's "sdcard"
- The zip seemed to flash correctly but then after I reboot from recovery, the screen would be sent back into recovery for some odd reason.
- I even tried to repeat the flashing process but it still resulted in sending me back to recovery after I hit reboot
5. So I restored my nandroid. Moved the Rom file to the root of extsdcard and then tried to flash it with cwm. It seemed to flash correctly once again but after I hit reboot, the phone shows the black splash screen with "Samsung galaxy s iii" in white letters then the phone shuts off. That's all that happens when I try to turn my phone on now.
Now normally if this were a HTC phone, I'd boot the phone to bootloader then recovery then restore my back up. But it's a Samsung. I know the volume down/home/power button trick but when I do that with my s3, the caution box pops up.. I hit volume up to by pass it then it just shows a big "downloading" sign that stays there forever. (I've literally left the phone sitting at the "downloading" sign for over an hour and nothing happened.)
So now I'm stuck. I no longer have a solution to get out of this situation. (I suppose this is a soft brick? )
Can anyone offer me any advice?

j0hnnyn said:
I did a lot of reading before I got into hacking my s3. I'm pretty new to the android development of Samsung phones, so the terms Odin and kexec are a little unfamiliar to me. I've owned and rooted and flashed 4 different HTC phones within the past 2 years successfully. But Samsung is a new ball game for me. And to my limited knowledge, I'm stuck and I'm hoping you guys can help me out.
Here's the process of what I did to my phone that got me to where I am.
1. I was able to root my phone and flash the custom recovery using using Adam outler's program successfully
2. I downloaded ez unlock boot loader from the play store and then successfully unlocked my boot loader
3. I tried to make a nandroid but I didn't know how to with the recovery I had. So I installed Rom manager and flashed cwm.
4. I downloaded the custom bean build 8 ROM, fully wiped, and attempted to flash the Rom with the Rom file sitting on the root of my phone's "sdcard"
- The zip seemed to flash correctly but then after I reboot from recovery, the screen would be sent back into recovery for some odd reason.
- I even tried to repeat the flashing process but it still resulted in sending me back to recovery after I hit reboot
5. So I restored my nandroid. Moved the Rom file to the root of extsdcard and then tried to flash it with cwm. It seemed to flash correctly once again but after I hit reboot, the phone shows the black splash screen with "Samsung galaxy s iii" in white letters then the phone shuts off. That's all that happens when I try to turn my phone on now.
Now normally if this were a HTC phone, I'd boot the phone to bootloader then recovery then restore my back up. But it's a Samsung. I know the volume down/home/power button trick but when I do that with my s3, the caution box pops up.. I hit volume up to by pass it then it just shows a big "downloading" sign that stays there forever. (I've literally left the phone sitting at the "downloading" sign for over an hour and nothing happened.)
So now I'm stuck. I no longer have a solution to get out of this situation. (I suppose this is a soft brick? )
Can anyone offer me any advice?
Click to expand...
Click to collapse
aye. go here and look for the return to stock section. remember to read it all before you start at least once.
http://forum.xda-developers.com/showthread.php?t=1762709

psycopanther said:
aye. go here and look for the return to stock section. remember to read it all before you start at least once.
http://forum.xda-developers.com/showthread.php?t=1762709
Click to expand...
Click to collapse
I'll try this when I get home. Do you know where it is I messed up while flashing the Rom? Did I use the wrong recovery?
Sent from my ADR6425LVW using xda premium

volume up/home/power button is recovery try that
and you used rom manger to flash rom?

j0hnnyn said:
I'll try this when I get home. Do you know where it is I messed up while flashing the Rom? Did I use the wrong recovery?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Use EZ-Recovery to flash CWM 6.0.1.0 and just avoid rom manager next time. Does Beans still use kexec? Could be the issue since the cwm in rom manager doesn't support it.

PJnc284 said:
Use EZ-Recovery to flash CWM 6.0.1.0 and just avoid rom manager next time. Does Beans still use kexec? Could be the issue since the cwm in rom manager doesn't support it.
Click to expand...
Click to collapse
Yep, kexec rom (kernel) using a recovery that doesn't support it.

not sure if this can help but read this post I made, it may help:
http://forum.xda-developers.com/showthread.php?t=1842716
Make sure you have the right CWR version which is 6.0.1 or 6.0.2. Don't mess around with flashing things in rom manager.
To get to your recovery you need to use vol up+home+power.
The vol down puts the phone into Download/ODIN mode. It's like the bootloader/hboot screen of HTC phones.
I always super wipe)cache,data,dalvil,system) before any install, nandroid or fresh rom. And then install downloaded apps with tit backup.
To use Bean's nandroids after bootloader unlock, flash a fresh copy of bean first to install kexec, then flash your nandroid.

If I understand correctly, Bean's Custom Build 9 is out and no longer needs kexec. Therefore I can now use CWM 6.0.1.2 as I did earlier and I should have no problems now that kexec is no longer necessary. Can anyone confirm that?

j0hnnyn said:
If I understand correctly, Bean's Custom Build 9 is out and no longer needs kexec. Therefore I can now use CWM 6.0.1.2 as I did earlier and I should have no problems now that kexec is no longer necessary. Can anyone confirm that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1768209]
From what I have read in his original post for his new build, it does require an unlock and is running a custom non-kexec kernel, so it I would draw the same conclusion that you are and it should in theory work with the 6.0.1.2 version of CWM.

j0hnnyn said:
If I understand correctly, Bean's Custom Build 9 is out and no longer needs kexec. Therefore I can now use CWM 6.0.1.2 as I did earlier and I should have no problems now that kexec is no longer necessary. Can anyone confirm that?
Click to expand...
Click to collapse
You should be able to use cwm6.0.1.2 to flash Imoseyons leankernel on any version of a custom touchwiz rom and enjoy no kexec
Im running beans 8 with imo's 2.2 kernel w/ no kexec...dont really like beans 9.

Twrp boot loop

This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??

lonoguge said:
This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
Click to expand...
Click to collapse
Where did you get twrp?
lonoguge said:
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
Click to expand...
Click to collapse
What is "another rom"?
lonoguge said:
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
Click to expand...
Click to collapse
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.

bhundven said:
Where did you get twrp?
What is "another rom"?
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
Click to expand...
Click to collapse
I got it from what I thought was the official XDA TWRP thread but I'm not sure if it was official or not
at first I tried reinstalling codename but now I'm trying Beam (Tuk edition) and it seems to be working

TWRP Major Boot Loop
hey guys, im new here and i desperately need help with my phone!
the other day i was flashing a rom on my samsung galaxy s 4g. Things were turning out fine, until i had some complications on my phone.. so, i removed the rom. when i rebooted my phone, it went directly into the team win recovery project boot loop and every time i try to reboot my phone, it goes into the twrp. I also can't wipe anything and i can't delete anything! Does anybody know how I can solve this or is my phone basically bricked

more details would be helpful..
As in what rom, or what kernel.... etc... and make sure you have the corret phone.

Same problem with t959p
Looks like I'm not alone.......here's my story
the other day I wanted to switch from a stock rom to a custom, so I flashed redux 1.3 which was actually a froyo rom, and it started draining my batt like crazy so I flashed another rom on top of the froyo rom not realizing what I was doing and somehow messed it up cuz now it will only boot into recovery.
Now just to be clear I know this was my fault, I know I should have odin'd back to stock first, but I wasn't thinking at the time.....Ohh and just so you know I've flashed this sucker hundreds of times and was always able to get out of any mess I got in.
So here is the situation as it stands now, 3 button combo to enter download does not work. I can only get it into download with the jig I made. the problem is even in download mode none of my pc's will detect the device as a Samsung composite device, so odin will not see it. I've installed every possible 32 n 64 bit driver I could find including reinstalling kies. Kies wont even see it. I've tried flashing a few roms that I know worked and still it just boots into recovery. Now one thing I'll tell you is that depending on which rom I flash I can get recovery to switch from cwm to twrp. right now I left it with cwm 6.x.
what I need is a cwm flashable stock telus t959p rom complete with bootloaders or at the very least a cwm flashable zip file containing the bootloaders to see if I can recover the phone.
ohh and if your thinking about telling me to google search for the answer then don't bother.......I've spent the last 4 days reading posts and going to different websites and repositories trying to find something that would help me and so far nothing has.
the only thing that might work as a last resort is pushing the bootloaders as per one of raver's or whitehawks posts but it's a little more complicated for me as I would have to set up a laptop with Linux as I don't think i'll be able to pull it off with any of my windows pc's, win7 and win 8 only.
so if anyone has the files I need or can make them please let me know....or if you think you have another solution I could try i'm all ears err eyes.
thanks
Jedi

Have you tried heimdall one-clicks? Maybe it's showing up as gadget or something like that. I've had luck using zadig and heimdall to bring it back from the brink of death.
http://forum.xda-developers.com/showthread.php?t=1358498

EDIT
Woops replied to the wrong thread .
Nothing to see here, move along

Would like to revive a slightly dead thread.
I upgraded to a Galaxy S3 and no longer use my SGS4G for daily use. I had AOKP and disliked it, FC's and didn't like the feel. I have been trying to install a new rom ( old rom, VH Black Ed. ). Every time It loads into TWRP I have the ability to select the zip, install, it says complete, but reboots right back to TWRP menu. I've tried flashing CWM and it will install, flash the rom, reboot, and right back to this TWRP B.S... what am I doing wrong? I want to continue to use this SGS4g for music and internet duties.
How can I install CWM and have it stay even after a reboot? This TWRP is starting to me off

Did you happen to one click to stock before you went ham at the recovery?
Sent from my SGH-T959V using Tapatalk 4

[Q] help getton to recovery. (not typical)

Please Help.
was running hyperdrive rls12 on a verizon sg3.. switched to baked. after that i cant get into recovery. i went all the way back to stock. unrooted and all.than i rooted again and unlocked bootloader i can boot into odin download. i can restart phone into rom. back to stock jellybean.. but every time i try to boot into recovery it says cant boot and puts me back in odin download. i tried through buttons and through rom manager. always the same outcome. phone is usable but i cant flash any new roms if i cant get into recovery. and i always to a clean flash. any ideas

Try flashing the recovery using odin
Thanks doesn't hurt....

ramdesai said:
Try flashing the recovery using odin
Thanks doesn't hurt....
Click to expand...
Click to collapse
Damn i feel dumb. feel like a noob. thanks. dont know why i didnt think of it. do the simple first i guess. thanks again

You are welcome...Happens sometimes... Take a break and then think again..

[Q] Confused as to what to do next: un-bricked, but recovery is still a garbled mess

So I rooted my brother's infuse 4G because it was slow as sin and needed A. a data/cache wipe and B, I wanted to give him Jellybean
I followed all the instructions I could; rooted, installed the modded 3e (or thought I did), got a CWM installed afterwards, and then set about installing first CM9 (as the Jellybean ROM post says I should) followed by the actual ROM and its Gapps. Well, I installed CM9 (although it seemed to take all of 30 seconds, rather fast...) when I tried to wipe data/factory reset, CWM froze. I rebooted and from then on I had it softbricked. Stuck booting at the samsung logo, and when I tried to return to the recovery, the recovery was a garbled mess that looked like a scrambled TV channel. I used Heimdall and did the one-click reset to stock, and here I am. The phone boots to stock just fine, but my recovery is still completely boned.
Do I re-root? How do I install CWM again without being able to install 3e? (can't install 3e without a working recovery in the first place, after all..)
One anomaly of note - when I was going about all this, booting the phone into recovery always got me 3e, even after installing CWM. I had to manually install CWM by using an update.zip and "reinstall packages" every time I wanted to use CWM. ROM manager would boot me to CWM, but it took several reboots and a flashable CWM zip before I could even get CWM installed in the first place - ROM manager refused to do it the easy way.
What did I do wrong, and more importantly, how do I get back on track? What do I do to put a fixed recovery back on this thing? Odin? ADB?
Today was the first time I ever used Heimdall, I've been a fair weather flasher since the beginning, I've never had to ADB or Odin.

It sounds like you didn't install cwm recovery properly, but I'm not sure I've never ran into this problem before. If you go here
http://forum.xda-developers.com/showthread.php?t=1524081 and carefully read over the first and second post you should end up with gb and red cwm recovery. The way I've done it was to put the phone in dl mode and flash the first package (the stock gingerbread att rom). After it is installed and booted up, I then power it off and go back into dl mode. Then flash the second package, which is just the kernel and red cwm recovery, (be patient because it takes awhile). Once that is done then go into recovery and wipe data/factory reset, wipe dalvik cache, wipe system, and install cm9. I think it only installs the kernel and recovery the first installation after formatting and creating the partitions, but after its done you have to go through the menus and tell it to reboot. After it reboots it will be stuck at the cyanogenmod galaxy s logo, so you will have to go into recovery once more. When you're there you should have blue cwm (only continue if you do) and install jb, without actually having to install the full cm9. When you navigate to which ever jb rom you want to install, a prompt will appear stating that there is incompatible partition layout and to confirm installation you will have to reselect the jb zip again to install. It will flash pretty quick because at this point its doing the same thing as when you went from gb to cm9 and only installs the kernel, recovery, and reformat/creates the partitions, (I think). It will reboot on its own but it will take you back into recovery. At this point all you have to do is navigate to the same jb zip you want to install and flash it, followed by gapps, and then reboot system. This process has worked for me but I highly recommend reading and following the instructions given in the post above.

Use goo.I'm app. Also you need to flash GB bootloaders in Odin . is recovery all colorful? If you see recovery fine just get goo app on play store and install a recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk

I would go the ODIN route, I have bricked so many times because i try to make the impossible possible. Just search for a already rooted pda,mdr file. I skipped the cm9 part idk if that would make things better or not but as my post says im a risk-taker

One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium

UnhoIy said:
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
but if don't have any problems i'm good right or should i go back and do it

MajorLeagueROM said:
but if don't have any problems i'm good right or should i go back and do it
Click to expand...
Click to collapse
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app

UnhoIy said:
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info

MajorLeagueROM said:
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
Click to expand...
Click to collapse
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.

UnhoIy said:
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
Click to expand...
Click to collapse
lol it happens to the best of us