I. Before You Begin: (Unlock your bootloader : http://www.huaweidevice.com/worldwide/servicePolicy.do?method=preUnlock) ADB and Fastboot tools attached.
if you dont get ur code from huawei then follow this easy tutorial .
https://www.dc-unlocker.com/free-huawei-bootloader-unlock-tutorial
1. This will void the warranty of your device. However, you can reinstate the warranty by unrooting your device if there’s any unrooting procedure available. (normally you can download the stock firmware and flash it)
2. This procedure works on Windows based PCs only.
II. Downloading Required Files:
1. Root Package (Download link: https://www.dropbox.com/sh/3wjle4gfu9ekc2x/gzVNiqjIn0/Root G510-0200.zip)
III. Rooting the Huawei Ascend G510:
1. Download and place the Root Package archive on your Desktop.
2. Extract files from the archive over to your Desktop.
3. Connect your device to your PC using the USB cable.
4. Copy the update.app file you extracted to your Desktop over to the dload folder on your Internal storage.
5. Once it has been copied, disconnect your device from your PC.
6. Turn OFF your device.
7. Turn it back on by holding down Volume UP+Volume DOWN+Power buttons together.
8. It’ll automatically flash the file on your device.
9. Once the file’s been flashed, reboot your device.
10. Plug in your device to your PC via USB cable.
11. Double-click on the file named rootx_start.bat available on your Desktop.
12. It’ll start rooting your device, will take a couple of minutes to finish.
13. Reboot your device once it’s been rooted.
14. You’re all done!
Excellent! Your Ascend G510 has been successfully rooted and is all ready to be loaded with your favorite root-only apps!
I was able to do everything fine until step 11 where it said it could not find my device every time I clicked a key. Any idea why this happens?
Shmoopy said:
I was able to do everything fine until step 11 where it said it could not find my device every time I clicked a key. Any idea why this happens?
Click to expand...
Click to collapse
do you have the adb drivers installed?
hamzairshad said:
do you have the adb drivers installed?
Click to expand...
Click to collapse
Is that the adb_minimal.rar?
Shmoopy said:
Is that the adb_minimal.rar?
Click to expand...
Click to collapse
adb minimal and fastboot is for your unlocking the bootloader. open cmd and locate adb and run it
adb devices
and check if you see your device attached in cmd.
hamzairshad said:
adb minimal and fastboot is for your unlocking the bootloader. open cmd and locate adb and run it
adb devices
and check if you see your device attached in cmd.
Click to expand...
Click to collapse
How do I locate adb through cmd?
I submitted my phone's serial number, IMEI and the like almost one week ago. I have double checked everything before submitting the form, including my mail address (which is fully working, and the spam folder is empty). But I haven't received my unlock code, yet. What's the deal? What can I do?
Shmoopy said:
How do I locate adb through cmd?
Click to expand...
Click to collapse
when u install abd and fastboot it will automatically goto ur program files. open cmd and locate to program files and u will have adb
ciccillover said:
I submitted my phone's serial number, IMEI and the like almost one week ago. I have double checked everything before submitting the form, including my mail address (which is fully working, and the spam folder is empty). But I haven't received my unlock code, yet. What's the deal? What can I do?
Click to expand...
Click to collapse
email me the details and ill get ur unlock code. [email protected]
Thanks anyway, I managed to unlock it in the meantime
Sent from my HTC Desire using Tapatalk 4 Beta
ciccillover said:
Thanks anyway, I managed to unlock it in the meantime
Sent from my HTC Desire using Tapatalk 4 Beta
Click to expand...
Click to collapse
:good:
Unlock Code for Huawei Ascend G510
Hi, can someone explain to me what I need to do to get an unlock code for my locked Huawei Ascend G510?
Thanks and Best regards, Viviana1987
another way to root your android..
there's another tool for getting root access on your phones..
it's right here http://www.srsroot.com/..
or just use Cydia Impactor. only thing you have to do is install busybox and super user app. all is in playstore.
sent from my phone
if you dont get ur code from huawei then follow this easy tutorial . replace brackets "()" with "."
https://www()dc-unlocker()com/free-huawei-bootloader-unlock-tutorial
need help
Hi,
I'm trying to unlock bootloader via DC Unlocker. But every time I take my mobile to download mode, connect to PC and use DC UnLocker to get bootloader code, it always says "In Download Mode, Needs restart"
Tell me what is wrong and what should I do?
I'm doing all this on Win7 64bit
all drivers are properly installed
The Root Package is offline in first post. Can you please reupload it? Thanks!
MysteryIII said:
The Root Package is offline in first post. Can you please reupload it? Thanks!
Click to expand...
Click to collapse
Found a mirror here: http://dl.huaweinews.com/Tools/Root-G510-0200.zip
Source: http://huaweinews.com/2014/01/root-huawei-g510/
Related
Hello,
I bought a used galaxy nexus S that is on version 2.3.6.
It does not seem to be reading any sim cards and the baseband version is listed as unknown.
I think it may be on a custom rom because of this. I want to flash it back to a stock rom but have no idea where to start. I downloaded 4.1.1
the google site. which I can`t link to because I am new here..
my nexus s is I9020A so i downloaded that version of jellybean but have no idea where to go from here.
Are there any easy to follow guides? And am I even on the right track here?
sackling said:
Hello,
I bought a used galaxy nexus S that is on version 2.3.6.
It does not seem to be reading any sim cards and the baseband version is listed as unknown.
I think it may be on a custom rom because of this. I want to flash it back to a stock rom but have no idea where to start. I downloaded 4.1.1
the google site. which I can`t link to because I am new here..
my nexus s is I9020A so i downloaded that version of jellybean but have no idea where to go from here.
Are there any easy to follow guides? And am I even on the right track here?
Click to expand...
Click to collapse
just follow this tutorial (need drivers, 5 min, and bootloader unlocked):
http://forum.xda-developers.com/showthread.php?t=1572307
to get fastboot working and learn some simple commands (just do the install drivers part):
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
video showing it works:
http://www.youtube.com/watch?v=K4DePKyRgvU&list=UUTsL8yOHOK7IUQl2tsKId5A&index=1&feature=plcp
if this worked hit thanks
Cascabreu said:
just follow this tutorial (need drivers, 5 min, and bootloader unlocked):
http://forum.xda-developers.com/showthread.php?t=1572307
to get fastboot working and learn some simple commands (just do the install drivers part):
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
video showing it works:
http://www.youtube.com/watch?v=K4DePKyRgvU&list=UUTsL8yOHOK7IUQl2tsKId5A&index=1&feature=plcp
if this worked hit thanks
Click to expand...
Click to collapse
Thank you. I am already confused at step 5 of installing the SDK though. which is:
5 - Once you're finished go to your SDK installation "extras\google\usb_driver" dir
Where exactly is the folder extras?
sackling said:
Thank you. I am already confused at step 5 of installing the SDK though. which is:
5 - Once you're finished go to your SDK installation "extras\google\usb_driver" dir
Where exactly is the folder extras?
Click to expand...
Click to collapse
Never mind found the folder.
Now I am not sure what the step turn of SNS means?
sackling said:
Thank you. I am already confused at step 5 of installing the SDK though. which is:
5 - Once you're finished go to your SDK installation "extras\google\usb_driver" dir
Where exactly is the folder extras?
Click to expand...
Click to collapse
got to local disk (root of your dirver) and u will see: android-sdk-windows
click and u will see extras
i will make a couple of screen captures to show you how to set it up the foloders and commands. wait a couple of minutes
Cool thanks!
I still don't understand what SNS stands for?
Google says social networking services... but step 8 is: Make sure the SNS is connected to the PC via the USB cable
So I doubt that..
here they are
read carefully the last image (i wrote some tips in the command window)
looks like SNS just means the phone somehow..
sackling said:
Cool thanks!
I still don't understand what SNS stands for?
Google says social networking services... but step 8 is: Make sure the SNS is connected to the PC via the USB cable
So I doubt that..
Click to expand...
Click to collapse
stop after installing google sdk, just plug your nexus in fastboot mode (turn off device, vol+ and power). then go to device manager (type in the search box, windows 7 or 8). and u will see android 1 (with exclmation mark). right click, update drivers, browse my pc, go to file nexussrootnew or got to sdk-extras-usb drivers, click "let me pick from a list...", chose all devices and install "adb android ...." dont know the right name. then u can go forward to the commands and install sotck images
Cascabreu said:
stop after installing google sdk, just plug your nexus in fastboot mode (turn off device, vol+ and power). then go to device manager (type in the search box, windows 7 or 8). and u will see android 1 (with exclmation mark). right click, update drivers, browse my pc, go to file nexussrootnew or got to sdk-extras-usb drivers, click "let me pick from a list...", chose all devices and install "adb android ...." dont know the right name. then u can go forward to the commands and install sotck images
Click to expand...
Click to collapse
Ok So when updating the driver, and I click all devices I have a huge list with a ton of manufacturers.
Which manufacturer do I choose?
sackling said:
Ok So when updating the driver, and I click all devices I have a huge list with a ton of manufacturers.
Which manufacturer do I choose?
Click to expand...
Click to collapse
samsung XD or google (best)
but dont choose all devices go back and check for android deivce
edit: step by step pics uploading!
Cascabreu said:
samsung XD or google (best)
but dont choose all devices go back and check for android deivce
edit: step by step pics uploading!
Click to expand...
Click to collapse
I don't see either... When I choose the USB_driver dirctory when I browse for driver software, it doesnt seem to really "go to that folder" posted the picture..
Right after i choose that folder I click the let me pick from a list of devices below.. Is that correct?
sackling said:
I don't see either... When I choose the USB_driver dirctory when I browse for driver software, it doesnt seem to really "go to that folder" posted the picture..
Right after i choose that folder I click the let me pick from a list of devices below.. Is that correct?
Click to expand...
Click to collapse
YES SIR! u are a good student lmao!
edit: pics are almost finished (sorry but im using my tethering network=slow)
Don't forget to hit thanks, you're getting a great tutorial
some pics step by sptep to help!!!! (at the 6 step it appear asus android device but dont care about that, just search for the words android devices, nexus devices are universal they work with all drivers)
never mind clicked have disc after clicking all devices! Now I have a list of 3
I installed ADB one..
What do you mean go forward with the commands?
sackling said:
never mind clicked have disc after clicking all devices! Now I have a list of 3
I installed ADB one..
What do you mean go forward with the commands?
Click to expand...
Click to collapse
wait 5 min a i will post some pics with step by step to install jellybean via fastboot (=command prompt) OKI?
Cascabreu said:
wait 5 min a i will post some pics with step by step to install jellybean via fastboot (=command prompt) OKI?
Click to expand...
Click to collapse
That would be extremely helpful!
Thanks so much.
-put phone on fastboot mode (turn off, vol+ and power)
-plug to pc
-put your nexussrootnew folder in root of your driver (mine is: local disk(C: ) ) and in there put the images downloaded from here:
https://developers.google.com/android/nexus/images (be carefull to download the right image for your phone!!!!!!)
-unzip one time (in that unzip folder u should have a radio file, a bootloader file, a zip folder,and 2 more files that u dont need)
- put the unzip folder on: (C: ) / nexusstooneew
-open a command prompt (click "windows key+r" then type "cmd")
-check the pics and the commands
help understanding pics:
1: win+r and type cmd
2: "cd.." means go back in the previous folder and "cd" means open folder, hit enter to make the command work
now type:
-fastboot oem unlock (will erase all your data) to get your bootloader unlocked and the nexts steps working
- fastboot flash bootloader (drag and drop bootloader.img file)
-fastboot reboot-bootloader (wait 5 secs)
-fastboot flash radio (drag and drop radio.img)
-fastboot reboot-bootloader
-fastboot -w update (drag and drop the zip file wich is in the main folder of the android image that u downloaded) (see 4 pic, the file is hightlighted) ("-w" means full wipe = clean install)
After lots of hard work by a great team of people (listed at the end), we have finally made a working Root for the Acer Iconia Tab A110.
Warning:
Code:
*I, nor any of the people involved in the rooting process of this
tablet are responsible for any damage you may cause to your device.
*If you brick your device, we are not to blame.
*Your warranty may be void after doing this.
*By using this guide, you acknowledge that you are fully responsible
for any damage you cause to your device and the device accessories.
ACER ICONIA TAB A110 ROOT GUIDE 4.1.2
UPDATED NOVEMBER 13, 2013; Most Recent Version
You will need to download/install the following before starting:
Acer Iconia Tab A110 USB Drivers (Should install on first connect of tablet)
Android SDK
SuperSU
a110-412-CWM-recovery.img Mirror: a110-412-CWM-recovery.img mirror
___________________________________________________________________________
Once downloaded, extract the Android SDK to a known location, such as the Desktop. (Use an extracting application such as Winrar)
Next, install the Nexus 7 Toolkit.
___________________________________________________________________________
Once that is complete, you can begin the rooting process.
On your device go to:
Code:
Settings > Developer Option
Turn Developer Options on at the top, and enable USB debugging.
Navigate to your Android SDK folder:
Code:
adt-bundle-windows-x86_x64\sdk\platform-tools
Copy and paste the recovery file in this directory, and copy the SuperSU files to the Tablet's SD Card. This will make the process easier later.
___________________________________________________________________________
Bootloader unlock:
The next step will wipe all your data. Remember to create a backup of anything you want to keep before attempting this.
Open a command promt (CMD) window in the directory above by holding shift while right clicking in the window and selecting "Open Command Window Here."
Type in CMD:
Code:
adb devices
Code:
adb reboot bootloader
Wait for the tablet to load into the bootloader, then type:
Code:
fastboot oem unlock
Accept on the tablet via volume and power buttons.
Your bootloader should now be unlocked.
___________________________________________________________________________
Root:
Type:
Code:
fastboot reboot-bootloader
Wait for it to reboot, once again.
Next, type:
Code:
fastboot devices
Code:
fastboot boot a110-412-CWM-recovery.img
Wait for the "OK" notification.
___________________________________________________________________________
Now, you will be booted into the custom recovery.
Right click on the Acer A110, and select install driver. Choose to point to your own path, and point it at the path for the Nexus 7 Toolkit install. (Make sure you have include subfolders checked)
Now, the device should be recognized and the root can continue.[/Code]
___________________________________________________________________________
On the device, use the volume buttons to navigate and power button to choose.
Select Install from SD.
Now type:
Navigate to the CWM-SuperSU-v0.99.zip file.
You should receive a complete message.
Once that is complete, on the tablet, navigate to reboot, select yes at the prompt, and the tablet will reboot.
You are now successfully rooted on 4.1.2!
___________________________________________________________________________
Special Thanks to the following people for their ongoing hard work:
fringle
FriedBacon
Skellums
posterz
heX79
blokenfeffer (New Recovery Image)
Stock Recovery
Here is a link to the Stock recovery pulled off of my tablet.
Not sure if it works or not, but if someone wants to try:
Stock Recovery
Installing Applications/Games to the External SD Card
I spent a long time looking for a program that allows me to do this, and finally found one that fully works.
DirectoryBind works wonders.
Here is a link to the guide:
DirectoryBind
Enjoy your extra storage space!
Reserved for further development..
Reserved for further development...
Reserved for further development
Thanks to the root method ? Could you tell me how to perform full system backup?
DjDom said:
Reserved for further development
Click to expand...
Click to collapse
I am a newbie to android. could anybody tell me how to perfrom full system backup for acer a110 4.1.2?
There is currently no way to make a full nandroid. However, if you want to back up the contents such as apps and data, use an app like my backup pro or titanium backup.
Make sure that it saves on external SD, not internal or you'll lose everything.
Sent from my Acer Iconia Tab A110 using XDA Premium HD app
root error！ help！
DjDom said:
There is currently no way to make a full android. However, if you want to back up the contents such as apps and data, use an app like my backup pro or titanium backup.
Make sure that it saves on external SD, not internal or you'll lose everything.
Sent from my Acer Iconia Tab A110 using XDA Premium HD app
Click to expand...
Click to collapse
thanks!
it seems there is an error while i root：
-quote-
adb server is out of date. killing...
ADB server didnt ACK
*failed to start daemon*
error: unknown host service
-unquote-
give advise please.
thanks in advane.
cooltravis said:
thanks!
it seems there is an error while i root：
-quote-
adb server is out of date. killing...
ADB server didnt ACK
*failed to start daemon*
error: unknown host service
-unquote-
give advise please.
thanks in advane.
Click to expand...
Click to collapse
Did you download the most recent version of ADB?
Make sure you install all the drivers and follow the beginning of the guide.
Completed process but no root
I finished the process but it did not work with the first img I will try with the other one
francois2012morin said:
Does not work for my tablet. It does not unlock the bootloder so I don't get the recovery file to load.
Is it a problem with the version of my tablet software.
Here are the specifications
Android 4.1.2
Core 3.1.10
Image version Acer_AV051_A110_RV00RC09_WW_CUS1
BUILD NUMBER Acer_AV051_A110_1.049.00_WW_CUS1
Image ref FM.S1RA0.03E
Thank you if you can be of any help.
Francois
Click to expand...
Click to collapse
How did you try unlocking the bootloader?
after you type "fastboot oem unlock" look at your tab and use the buttons to select it. It gives you about 10 seconds until it reboots back to the bootloader
Oh and I can't get the sideload to kick in. I put in "CWM-SuperSU-v0.99.zip" but it doesn't do anything.
Im wondering if I can push it over using adb install bc adb sideload isn't working?
Thanks
running_onCode said:
after you type "fastboot oem unlock" look at your tab and use the buttons to select it. It gives you about 10 seconds until it reboots back to the bootloader
Oh and I can't get the sideload to kick in. I put in "CWM-SuperSU-v0.99.zip" but it doesn't do anything.
Im wondering if I can push it over using adb install bc adb sideload isn't working?
Thanks
Click to expand...
Click to collapse
I had the same problem with Sideload. Are you following the part where you need to install the drivers from the Nexus 7 toolkit?
DjDom said:
I had the same problem with Sideload. Are you following the part where you need to install the drivers from the Nexus 7 toolkit?
Click to expand...
Click to collapse
Yea. Everything. Anyway to get passed it?
Im trying to root my tablet with your guide but I can't find the A110 in the device manager after I boot the custom recovery
darthpilsner said:
Im trying to root my tablet with your guide but I can't find the A110 in the device manager after I boot the custom recovery
Click to expand...
Click to collapse
Yes i am having the same problem, mine does not see a110 but refers to google galaxy nexus adb interface. I have tried this about half a dozen times with the same result, no root. Oh well try try again. Do i need to factory restore after each failed attempt?
No Root....
Hello
I have tried this guide about 15 times... I factory reset after each try... I uninstall the drivers on the pc and make sure I install the Acer drivers.... Follow the guide to the letter... Install the google drivers... I do the sideload of su and it looks like works.... but not root... I am not sure why... Everything looks good... I am unlocked... the recovery image loads well... I replace the drivers..... I sideload.... no root.... So strange.... I guess I should just be happy it is not bricked .. .lol... Thanks for the work... Oh well... I am not looking for help... just making you aware.... thanks for all the work though...
rocy1971 said:
Hello
I have tried this guide about 15 times... I factory reset after each try... I uninstall the drivers on the pc and make sure I install the Acer drivers.... Follow the guide to the letter... Install the google drivers... I do the sideload of su and it looks like works.... but not root... I am not sure why... Everything looks good... I am unlocked... the recovery image loads well... I replace the drivers..... I sideload.... no root.... So strange.... I guess I should just be happy it is not bricked .. .lol... Thanks for the work... Oh well... I am not looking for help... just making you aware.... thanks for all the work though...
Click to expand...
Click to collapse
I'm having the exact same problem as you. Not sure if it'll help, but my firmware version has PA in it.
Same
justinnickovtime said:
I'm having the exact same problem as you. Not sure if it'll help, but my firmware version has PA in it.
Click to expand...
Click to collapse
Model a110
Android 4.1.2
Kernel 3.1.10
image acer_AV051_a110_rv00rc09_pa_cus1
Build acer_AV051_a110_1.049.00_pa_cus1
everytime I do it .... it looks like it will work... then check root with rootchecker or susuperuser.... no luck.....
If the root did work... would app2sd work... or do I have to wait for a custom rom?
Same result here!
justinnickovtime said:
I'm having the exact same problem as you. Not sure if it'll help, but my firmware version has PA in it.
Click to expand...
Click to collapse
Exactly the same results as the previous guys, every step appears successful, including sideload, but no SU after reboot. My Firmware has WW in name.
Only messages seen during sideload which imply errors are E: can't mount /cache/recovery/log etc etc.
Anyone any idea what may be wrong?
After unsuccessfully attempt to flash identity crisis phone not able to flash any other rom seems to me bricked, any solution?
Sent from my MI PAD using XDA Free mobile app
Fastboot flash the XT1033 5.0.2 Firmware Image for your phone from here:
http://forum.xda-developers.com/mot...y-firmware-t3110795/post60792279#post60792279
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
If you have problems, provide a full and complete fastboot log (copy and paste the fastboot screen)
I am on cm 12.1 now.
I wanted to use your rom.
Sent from my MI PAD using XDA Free mobile app
Nishblueweapon said:
I am on cm 12.1 now.
I wanted to use your rom.
Click to expand...
Click to collapse
Something has happened to your phone. If you do what I describe above, any custom ROM should work.
Will try buddie
Sent from my MI PAD using XDA Free mobile app
lost101 said:
Something has happened to your phone. If you do what I describe above, any custom ROM should work.
Click to expand...
Click to collapse
in fastboot mode it says waiting for device.
To be sure i have installed latest drivers via motorola device manager.
Nishblueweapon said:
in fastboot mode it says waiting for device.
To be sure i have installed latest drivers via motorola device manager.
Click to expand...
Click to collapse
@lost101 i hope this could help him
it won't work that easy. On what window you are ?? I don't give a damn which driver you installed http://forum.xda-developers.com/showthread.php?t=2588979
just install the latest version from here.... Let it download and then i
MAKE SURE YOU HAVE USB DEBUGGING ON FROM DEVELOPERS SETTINGS
it will ask you for something like installing system wide adb and fastboot devices. Let it install at last skip the installing device software.
Now just go to c drive of your system or drive in which you have your window installed(drive) installed. Now you see adb named folder on the root of the drive.
Just press shift key first and right click then, you will see there a option of opening with command prompt or something.
Voila !!! you are now in adb .
To check you have right driver installed
give coomand like: adb devices this will show your device in the window...
if you see your device then type command: adb reboot bootloader this will bring you into bootloader menu...
TO check here that you are properly set yourself type command: fastboot devices
sachoosaini said:
@lost101 i hope this could help him
it won't work that easy. On what window you are ?? I don't give a damn which driver you installed http://forum.xda-developers.com/showthread.php?t=2588979
just install the latest version from here.... Let it download and then i
MAKE SURE YOU HAVE USB DEBUGGING ON FROM DEVELOPERS SETTINGS
it will ask you for something like installing system wide adb and fastboot devices. Let it install at last skip the installing device software.
Now just go to c drive of your system or drive in which you have your window installed(drive) installed. Now you see adb named folder on the root of the drive.
Just press shift key first and right click then, you will see there a option of opening with command prompt or something.
Voila !!! you are now in adb .
To check you have right driver installed
give coomand like: adb devices this will show your device in the window...
if you see your device then type command: adb reboot bootloader this will bring you into bootloader menu...
TO check here that you are properly set yourself type command: fastboot devices
Click to expand...
Click to collapse
I am on win. 7. It first gave me an error adpwinal.DLL file is missing from your PC while I was trying to flash those commands in cmd window, so I installed that file on my PC. Whenever I am in fastboot mode now it doesn't recognise me device. & normally it does. I think the problem with fastboot files, it shows USB connected. Will try what u said.
Sent from my Moto G using XDA Free mobile app
while flashing the system files it says file too large
To be sure i was on cm 12.1 (5.1.1) & i have flashed ASia retail 5.0.2?
Where i am wrong?
Nishblueweapon said:
while flashing the system files it says file too large
To be sure i was on cm 12.1 (5.1.1) & i have flashed ASia retail 5.0.2?
Where i am wrong?
Click to expand...
Click to collapse
Use mfastboot.exe: https://www.androidfilehost.com/?fid=24052804347778493
lost101 said:
Use mfastboot.exe: https://www.androidfilehost.com/?fid=24052804347778493
Click to expand...
Click to collapse
Got it to boot successfully. Thank u
What I did was flashed 1 more system I.e. 0 not mentioned in the op
Sent from my MI PAD using XDA Free mobile app
I got tired of ZenUI and I was searching for a method to install CM14. The problem all starts with my bootloader.
I've tried to find an unofficial way to do it and I couldn't find one specific for my phone.
The official one just retarts my phone, or it just tells that there's a network error. Something like that.
I hope I don't need to do downgrading.
Zenfone Selfie Z00UD (ZD551KL)
MMB29P.WW_user_21.40.0.1923. 20161027
Cristianrr said:
I got tired of ZenUI and I was searching for a method to install CM14. The problem all starts with my bootloader.
I've tried to find an unofficial way to do it and I couldn't find one specific for my phone.
The official one just retarts my phone, or it just tells that there's a network error. Something like that.
I hope I don't need to do downgrading.
Zenfone Selfie Z00UD (ZD551KL)
MMB29P.WW_user_21.40.0.1923. 20161027
Click to expand...
Click to collapse
Hello,
You may follow the instructions here.
Later once the configuration is done properly then you can connect your device and enable USB Debugging under the options.
1. Download Modaco Superboot file for Asus Zenfone Selfie Zd551kl from this link : http://downloadsafe.org/file/0YgX7 , and save them to your computer.
Tutorial Video : Easy Way To Download file = http://how-to-root.com/10
2. Once downloaded, extract it by right clicking and extract all.
3. On your device, click on Settings > Developer Options > Turn USB Debugging On.
4. Plug the device in to your computer via USB cable.
5. Open the superboot folder that we just extracted (until you see the folder with fastboot-windows inside it), then hold the shift key down on your computer and right click any blank area.
6. Now, select open command window here.
7. In the command prompt, type the following with hitting enter at the end of each line.
adb-windows reboot bootloader (and wait for the device to reboot) fastboot-windows oem unlock *If it gets stuck at waiting for device here, download and install PDANet on your computer, once installed, unplug then plug the device back in and see if that fixes it.
Once it runs the device should display a screen asking you if you are sure. Click yes using the volume buttons. The device will go back to the bootloader screen but say unlocked at the bottom.
Also here's the firmware needed to unlock bootloader for your reference https://forum.xda-developers.com/zenfone2/help/zd551kl-zenfone-selfie-unlock-t3271243
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
You may follow the instructions here.
Later once the configuration is done properly then you can connect your device and enable USB Debugging under the options.
1. Download Modaco Superboot file for Asus Zenfone Selfie Zd551kl from this link : http://downloadsafe.org/file/0YgX7 , and save them to your computer.
Tutorial Video : Easy Way To Download file = http://how-to-root.com/10
2. Once downloaded, extract it by right clicking and extract all.
3. On your device, click on Settings > Developer Options > Turn USB Debugging On.
4. Plug the device in to your computer via USB cable.
5. Open the superboot folder that we just extracted (until you see the folder with fastboot-windows inside it), then hold the shift key down on your computer and right click any blank area.
6. Now, select open command window here.
7. In the command prompt, type the following with hitting enter at the end of each line.
adb-windows reboot bootloader (and wait for the device to reboot) fastboot-windows oem unlock *If it gets stuck at waiting for device here, download and install PDANet on your computer, once installed, unplug then plug the device back in and see if that fixes it.
Once it runs the device should display a screen asking you if you are sure. Click yes using the volume buttons. The device will go back to the bootloader screen but say unlocked at the bottom.
Also here's the firmware needed to unlock bootloader for your reference https://forum.xda-developers.com/zenfone2/help/zd551kl-zenfone-selfie-unlock-t3271243
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
I cannot skip the survey. The only one I get requires me to register my phone number. Is there any other download link?
Thank you
Update: after a break for a couple of days, this appears to work again. But probably not for long -- so better try it if and while it's still up ;-)
I was able to do just that (and unlock the bootloader on my phone) some two months ago (in February 2023).
I did by using this perl script of mine to simulate the https requests performed by the deep testing app.
My phone was a Realme 9 5G (RMX3474), the EU/GDPR variant.
A dry run with bogus serial num and imei strongly suggests that they haven't "fixed" it yet and it may still work.
I also suspect that it may work with other Realme phones not supported by the deep testing app.
But I don't have any spare phone (and I will not test my luck by locking it back ;-)), so I'll be grateful if anyone with a locked Realme phone would give it a try (the deep testing app would still ask you for confirmation, you don't have to unlock your phone if you don't want to).
turistu said:
I was able to do just that (and unlock the bootloader on my phone) some two months ago (in February 2023).
I did by using this perl script of mine to simulate the https requests performed by the deep testing app.
My phone was a Realme 9 5G (RMX3474), the EU/GDPR variant.
A dry run with bogus serial num and imei strongly suggests that they haven't "fixed" it yet and it may still work.
I also suspect that it may work with other Realme phones not supported by the deep testing app.
But I don't have any spare phone (and I will not test by luck by locking it back ;-)), so I'll be grateful if anyone with a locked Realme phone would give it a try (the deep testing app would still ask you for confirmation, you don't have to unlock your phone if you don't want to).
Click to expand...
Click to collapse
Thank You!
It realy works!
Thanks,
Worked for me with Android 13/RealMe UI 4.0.
Now to magisk...
After unlocking the phone, I'm looking for the boot.img.
I can find firmware update package for UI3.0, but none seems available for 4.0.
Could someone point me to it ? (either boot.img or ofp package)
Is there a way to use this script on realme 9 pro 5g eu rmx3472?
Edit: It works perfectly and i was also able to change my region to ru.
mister_slowhand said:
After unlocking the phone, I'm looking for the boot.img.
I can find firmware update package for UI3.0, but none seems available for 4.0.
Could someone point me to it ? (either boot.img or ofp package)
Click to expand...
Click to collapse
Try https://rms01.realme.net/sw/RMX3472GDPR_NN.X.NN_YYYYMMDDHHMM0000.zip,
(replacing the N, Y, etc with the actual version of the firmware).
Also the variants with .7z instead of .zip.
hatbo said:
Thank You!
It realy works!
Click to expand...
Click to collapse
Hey lads,
Could you post me here some steps how to install and unlock bootloader using that script PERL ?
I'd really appreciate it. Cheers.
Thanks. Rob
RobertoSt25 said:
Hey lads,
Could you post me here some steps how to install and unlock bootloader using that script PERL ?
I'd really appreciate it. Cheers.
Thanks. Rob
Click to expand...
Click to collapse
As already mentioned at the end of that github page, you can use the "Strawberry Perl" distro to run that perl script on Windows.
1) First install strawberry perl
2) download the deeptesting-junk.pl script
3) start the "perl command prompt" (it should be the first result when you type "perl" in window's search box)
4) inside the command prompt change to the directory where you had downloaded the script
5) run the commands and follow the instructions from the github page. Take care to replace the dummy HHH and DDD with your actual serial number and IMEI ;-).
If you have problems with those instructions (e.g. the deeptesting app still does not work, despite the script getting a successful result to the "ckeckApproveResult" command), please mention exactly what happened.
I love you Turistu, thank you for the guide!
I've had the problem, that the device wasn't getting recognized in fastboot mode.
That is because the OnePlus Fastboot USB Drivers are NOT SIGNED!
You have to restart Windows with advanced startup settings, and deactivate driver signing. So that Windows trusts unsigned drivers.
Then you can restart Windows in that mode, settings -> windows update -> advanced options -> reset options -> advanced restart. Go to advanced boot -> deactivate usb driver signing (option 7), start the pc with that option.
AND THEN you can boot your device into fastboot mode, go into your drivers and if it's still coming up as unrecognized, right click it and update it's drivers manually with the oneplus drivers.
Then it should work for you, too. Gave me lots of Headaches.
I have attached the Oneplus drivers i've used for fastboot and a patched boot.img with magisk 26.1 from RMX3311_11.C.10_EU_202303171905.
You did a great job! Thank you!
PS. Dacă ești român, ești foarte tare frate!
turistu said:
As already mentioned at the end of that github page, you can use the "Strawberry Perl" distro to run that perl script on Windows.
1) First install strawberry perl
2) download the deeptesting-junk.pl script
3) start the "perl command prompt" (it should be the first result when you type "perl" in window's search box)
4) inside the command prompt change to the directory where you had downloaded the script
5) run the commands and follow the instructions from the github page. Take care to replace the dummy HHH and DDD with your actual serial number and IMEI ;-).
If you have problems with those instructions (e.g. the deeptesting app still does not work, despite the script getting a successful result to the "ckeckApproveResult" command), please mention exactly what happened.
Click to expand...
Click to collapse
Hello there,
I tried your method, I did everything step by step and it actually worked and it did unlock the bootloader.
However after yelow sign saying the "device is unlocked" went black screen, rebooted and again fastboot mode.
Now I really do not know what to do -.-
Any advice would help.
Thanks Rob
RobertoSt25 said:
However after yelow sign saying the "device is unlocked" went black screen, rebooted and again fastboot mode.
Click to expand...
Click to collapse
If the top of the screen has "START" in green letters, then just press the power button.
BTW, what phone model do you have?
turistu said:
If the top of the screen has "START" in green letters, then just press the power button.
BTW, what phone model do you have?
Click to expand...
Click to collapse
yes top of the screeen is START green, but when I pressed power just keeps rebooting into fastboot.
RMX 3474 REALME 9 5G
Thanks