Related
How to install clockworkmod recovery:
Click to expand...
Click to collapse
SP Flash Tool method, root not required
Click to expand...
Click to collapse
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.1.5 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Very Easy & safe way to FLASH CWM RECOVERY in any Android Device
steps:->
1. Downlaod CWM recovery.img
2: download recovery manager from HERE now Copy CWM recovery.img in SD card, now install the recovery manager.apk normally
3. Now open the recovery manager app you recently installed.
4. Click on recovery in app menu.
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your recovery
Click to expand...
Click to collapse
Some SS Tutorials for how to flash CWMR using SP Flash Tools
Click to expand...
Click to collapse
Check here all steps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
New & Latest Released CWMR 6.0.2.8 is now available for Micromax A89 Ported by ME
Click to expand...
Click to collapse
Here is The New Version of CWMR 6.0.2.8
Click to expand...
Click to collapse
Change Logs
Click to expand...
Click to collapse
Partition SD Card Option Added in Advance Menu
Install Zip From Sideload option added in Main menu
Backup & Restore Backup from Internal & Externel SD is now Available
Click to expand...
Click to collapse
Credit : -
bgcngm
yuweng
Cygwin
Me
dont say Thanks Hit
if you can
Click to expand...
Click to collapse
Sorry i dont have Installed DDMS in my newly formated PC thats why Take % Post Screenshots using My A90s
here are Proof this is working fine i personally Tested...
How to install clockworkmod recovery:
....
...
..
...
Credits goes to Cygwin Kitchen + ME
Click to expand...
Click to collapse
WTF! all you can shove your credit up your ass dude! although i am thankful to you but stealing someone else's credit isn't fair!
mujhe pata he ki ye indians ki gandi aadat he par yaar tum jese logo ke karan hi to hamari bejjezti hoti he.. sudhar jao!!
Click to expand...
Click to collapse
comeon dude! behave!
btw thanx! :laugh:
Your Welcome dude.............
I give credit Cygwin cuz i unpack stock recovery for system mount points thats why i give credits...........also i give credit to me cuz i port that Recovery for A89 Device lol............. btwn thanks for your Advice.....sudhar ne ki kosish jarur karenge.......
i am unable to install drivers...what should i do....i am using windows 8..
piyushverma said:
i am unable to install drivers...what should i do....i am using windows 8..
Click to expand...
Click to collapse
For Installing Driver just Run that exe file if you are in Win 8 then try this
Right Click on file and Run As Administer then finish instillation and Reboot PC then connect your device.....
it still does not work...can u make a flashable zip fr it??
piyushverma said:
it still does not work...can u make a flashable zip fr it??
Click to expand...
Click to collapse
Dude, that just means that drivers aren't compatible with Win8, just use your friends pc or other pc with xp/7, you can install TWRP which is touch friendly (same as cwm) here
its work
its work ..... thanx...
yes it worked on xp....thanx for help....:victory:
Hi Bhardik
I posted this news here. I ended up using one of your screenshots without your permission because I was in a hurry. I hope you have no problem with that. :cyclops: http://www.droidiser.com/2013/02/install-clokcworkmod-recovery-micromax-a89.html
Re: [[CWM]] ( Recovery v6.0.1.5 ) For Micromax A89
droidiser said:
Hi Bhardik
I posted this news here. I ended up using one of your screenshots without your permission because I was in a hurry. I hope you have no problem with that. :cyclops: http://www.droidiser.com/2013/02/install-clokcworkmod-recovery-micromax-a89.html
Click to expand...
Click to collapse
No need to ask me for permissions cuz here I am only try my best to help &provide something good or new to other memmbers ...its all right even u no need to ask me for my any work u post where u want I don't mind it any more
Sent from my A90 using xda premium
Micromax a89 CMW recovery problem
its not working in xp ............
and can u specify the time required for process to complete .....
The progression bar is not showing atleast 1% after the 10 min.......
can u make tke video of it.......
Must Reply I m in a very serrious problem m,,
You missed this step
BHARDIK said:
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.1.5 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Click to expand...
Click to collapse
Click on Recovery and browse to the CWM_6.0.1.5_recovery file in the A89 CWM folder Please insert this line between 5th and 6th step. Name this step as 5.1
hafeezluqman said:
Click on Recovery and browse to the CWM_6.0.1.5_recovery file in the A89 CWM folder Please insert this line between 5th and 6th step. Name this step as 5.1
Click to expand...
Click to collapse
Check OP Post 1
Tutorials posted with ScreenShots
How to flash CWMR Using Sp Flash Tools
Hope now every user can understand better.........
Thanks
BR
Hardy Ahir
TheMaker01 said:
its not working in xp ............
and can u specify the time required for process to complete .....
The progression bar is not showing atleast 1% after the 10 min.......
can u make tke video of it.......
Must Reply I m in a very serrious problem m,,
Click to expand...
Click to collapse
Check OP post 1
there u see tutorials with screenshots its also working on Windows XP Sp2 and Win7 tested by me in both OS
Try and follow all steps again hope u done.........
Good Luck
Thanks a Lot to Bhardik
U r just Awesome !!!!!!!!!!!!!!!!!!!!!!!!!!!
And once Again Tankssssssssssssss A lottttttttttttttttttttt
if you are rooted , u can use this app (mobile uncle tools) in fone ,
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
to install any recovery u want , without need of a pc ..there is no need to undergo the complicated spflashtool method...
all thanks to the devs for coming up with cwm and twrp for this device
MTK uncle tools
mmxa110user said:
if you are rooted , u can use this app (mobile uncle tools) in fone ,
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
to install any recovery u want , without need of a pc ..there is no need to undergo the complicated spflashtool method...
all thanks to the devs for coming up with cwm and twrp for this device
Click to expand...
Click to collapse
U should know that the s/w that u recommended is not working in MICROMAX A 89 i.e (mobile uncle tools)
I m Telling u that bcoz i tried it by myself in my MICROMAX A89!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!http://forum.xda-developers.com/images/smilies/silly.gif
TheMaker01 said:
U should know that the s/w that u recommended is not working in MICROMAX A 89 i.e (mobile uncle tools)
I m Telling u that bcoz i tried it by myself in my MICROMAX A89!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!http://forum.xda-developers.com/images/smilies/silly.gif
Click to expand...
Click to collapse
yes u r right m. Uncle tools not working for me in my A89 /A90 and my A90S.... thats why i recommended sp flash tool methods its working fine without any problems......
Hardy
Sent from my A90 using xda premium
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
rooted
init.d
signal tweaks
3g tweaks
battery tweaks
gpu rendering
dns tweaks
media tweaks
v6 supercharger
kickasskernel
crossbreeder
reorganized build.prop file
uploading
http://www.4shared.com/folder/dJXI2ODd/_online.html
try open first in case of corrupt file
remove crossbreeder for much better battery
flash uninstall zip http://forum.xda-developers.com/showthread.php?t=2113150
and underclock for much longer battery download setcpu or no frillcpu or anything u want i dnt care..
save rom in SD card
reboot to CWM/TWRP
install rom via SD card
reboot
I'm not responsible for any loss of data or brick....
i think this only works on iq6A
do you already own this phone?
Cherry mobile Omega HD info states that its a dual core phone while all info about i-mobile IQ6 states its a single core phone. does anyone know which mediatek chipset the Omega HD uses? It's GPU?
yes i had it
How?
How can we flash the CWM to the Omega HD if you don't even give us a flashtool? Is this Rooting process tested? is it working?
Please help me
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
Sir, can I have a copy of the Setting.apk of your Cherry Mobile HD? i've accidentally forgot to have a backup of it and now, i've accidentally just erased it. please help me. thankyou very much
Pretty Please?
Wil53664 said:
yes i had it
Click to expand...
Click to collapse
please post the Settings.apk of the Cherry Mobile Omega HD sir. I really need it it would be appreciated if you post it here.
How to Backup the phone
just bought the phone yesterday
do yo guys know how to back up this jellybean phone?
Hey guys, if you have FB we have a group with most of oHD users. Just search "CherryMobileOmegaHD" in FB (can't post links yet. sorry)
There are custom roms in the group, the usual rom cooked from dsdixda's kitchen (zipalign, deodexed, rm bloatwares)
@cyzarine
What do you mean with backup? We have the stock rom in the group, you might want to check it out.
Bummer! I'm stuck at step 3!
You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
Click to expand...
Click to collapse
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
anyone have a kernel that have oc"?
In need...
Woke up to a drained Omega HD today.
Plugged it in to have it charged.
Switched it on afterwards.
"OmegaHD" flashed before my eyes, followed by a blank screen with the familiar Cherry Mobile tune playing on the background. And then nothing! NO DISPLAY! I touch the screen and there are sounds playing to confirm each press, which means I am pressing on the right places -- only that there is NO DISPLAY APPEARING.
I switch it on and off, still the same results.
Wiped cache. Nothing... Since it's practically new, I go ahead and factory-restore the thing... still the same results. NO DISPLAY! :-S
What else can I do to this device to have it work properly?!
Have you installed any custom rom or any other zip files with your phone?
xMinistro said:
Have you installed any custom rom or any other zip files with your phone?
Click to expand...
Click to collapse
do have stock rom can you give plsss......
---------- Post added at 11:02 PM ---------- Previous post was at 10:41 PM ----------
[/COLOR]
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
Click to expand...
Click to collapse
Hi. Can you please post a mirror on the twrp-omegahd.img file? All of the other files have been downloaded except for the img file. Error comes up.
bakes5981 said:
Bummer! I'm stuck at step 3!
-- umm... NO, I DON'T!! There must be a step that's missing... :-S
edit:
nevermind. I forgot to rename TWRP file to "recovery"
Thanks for this!
Click to expand...
Click to collapse
please hit thanks if this helps
OmegaXtremeHD link issues
OmegaXtremeHD link is not working .... 509 error .... any mirror or alternative links?
Wil53664 said:
Omega HD root
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (http://www.mediafire.com/?ar2ccya8395d1):
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
if the driver didn't work download this http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
install folder step 1 to 3
Place the scatter file and TWRP recovery in the SAME FOLDER.
rename twrp recovery to recovery.img
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
credits to ish gridote
OmegaXtremeHD
s3 bootanimation n sound
s3 boot logo
Jelly bean icons
iphone ringtones
google play music
dolphin browser
apex launcher
deodexed
busybox
init.d
signal tweaks
3g tweaks
battery tweaks
v6 supercharger
kickasskernel
crossbreeder
download link
https://www.dropbox.com/s/8q1c6db45uegepk/OmegaXtreme.zip
updated link
save rom in SD card
reboot to CWM/TWRP
WIPE DATA/FACTORY RESET
install rom via SD card
reboot
Click to expand...
Click to collapse
Hey buddy,
Where's the file..??
StanleyD said:
Hey buddy,
Where's the file..??
Click to expand...
Click to collapse
will update link later
having trouble with some apps working on my Omega HD. a couple of my Android mainstays are Haxsync and Swiftkey. on my Omega HD, they run no problem, but if the unit powers off for whatever reason, when I turn it back on, my Haxsync account (under Settings/Accounts) disappears, requiring me to set up the app again, and Swiftkey is no longer activated as my default input. any help?
KARBONN A7*
Android Develepment
Rate this thread 5 star and hit the thanks Button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Things to know before proceeding:
1. Do proper research before doing any thing to your lovely device.
2. I am not responsible for the bricked devices or broken hearts
3. I want to tell u that i dont own this phone. So pls dont expect any testing services...
4. My friend owns this phone so i making this thread
5. For development to take place there should be a place where all can share there views. So this would be a place for all the users
Click to expand...
Click to collapse
RULES:
1. No one should post any type of warez.
2. If u have any problem calm.down and post it here.
3. No fights!!
4. And last never copy quote the whole OP ..just quote the portion u want to keep the thread clean
Click to expand...
Click to collapse
Guyz first of all i want to tell you one thing that my friend is going somewhere so i have nothing for testing. I have found the root and extracted all necessary files for development.. So here we go
Installing ADB Drivers
Firstly Download a Software called Moborobo and intall it in your PC : Link
Now In your Phone go to SETTINGS>Develeper Options and tick usb debugging.
Now connect ur phone to PC via usb cable and open moborobo.
Now moborobo will install the drivers.
Rooting Guide
Download the Rooting Kit from Here. [Credits: Bin4ry for his amzing program]
Connect your phone to the pc with drivers installed.
Now extract the Rooting Kit anywhere and open RunMe.bat
Choose normal by pressin 1 and then Enter
Now you will be asked to restore you Data on your phone. Click restore my data
Now hold your heart and sit down for 2 minutes and voila!! Your device is rooted
Removing Bloatware
Bloatware are the apps which are of no use but can't be deleted as they come preintsalled on your device. These app consume ram and sytem memory both
Steps:
This tutorial uses ‘root explorer’ app to select and move files, but ‘ES file explorer’ can also be used to follow these steps.
Open ‘root explorer’ and grant root permissions to ‘root explorer’.
Navigate to /system/app folder. Go to options.
Tap on ‘Multi-select’ and start selecting following apps (bloatware for me, may not be for you) from the folder – Email.apk, Email.odex, entertainment.apk, Exchange.apk, Exchange.odex, games.apk, GMS_Maps.apk, livetv.apk, LiveWallpapers.apk, LiveWallpapers.odex, Talk.apk.
Either delete these from ‘root explorer’ or move to SD card if you plan to use them later.
Enjoy a faster A7*.
Caution : please ask before deleting something which you don't know what it is about in system/app as all files there are not bloatware. One user made had to go to service center because of it.
-----------------------------------------
Hit the Thanks button
If u are a lot happy with my first step towards the a7*'s development you can do a reacharge of my phone
Development Section.
I cannot do much development because of the lack of device but can provide u the files.
I also cannot compile cwm But i am providing you guyz the stock recovery image. If you know who some developer Who can compile cwm you can request him to compile one.
Files
Stock Boot.img
Link
Click to expand...
Click to collapse
Stock Recovery Image
Link
Click to expand...
Click to collapse
MODS.
All the mods which are working on a7* will be posted here. By working I mean that most of them will be tested. If u find any good mod working on this phone then tell me I will add it here so everyone can find it.
INTERNAL MEMORY MOD
Steps:
First of all u need a memory card. A class 10 memory card is recommended, class 4 will also do the task but may cause some lag in your phone
Now you have to partition your SD card to an EXT partition. Any of the EXT 2/3/4 will work. For partitioning your SD card you can refer to this GUIDE
After partitioning your SD card download this app and install busy box using this app LINK
Now you have to activate init.d support in your phone. For that visit this thread. Better use the apk method.
All those steps were preparation. Now comes the main work. Using any root file browser like Root explorer or ES file manger go to
System>etc> init.d and download this File and paste it there.
Now download Android terminal emulator from Google play
Open terminal and type
Code:
su
and grant root permisions
Now type this code
Code:
cd /system/etc/init.d
chmod 0755 40int2ext
and press enter
Now type this
Code:
chown root.root 40int2ext
and press enter
Now close everything and reboot the device and go to settings>storage and see the magic
Warning : don't keep ext partition size more than 750 mb
Credits
creator of universal init.d support
Creator of cronmod
Click to expand...
Click to collapse
----------------------------
Hit Thnx and if you are happy consider donating me in the form of small recharge
For themes
extra
-----------------------------------------
Press thnx for every help
F.A.Q.
Q : Does Rooting the phone has any risks?
A : No there is no Risk as such but everything you do is at your own risk
Click to expand...
Click to collapse
Q : I want XYZ thing for my phone?
A : Sorry i cannot provide you but yes i can help you to get or achieve that thing
Click to expand...
Click to collapse
Q : I want some help ?
A : Ok calm down. Post here what help you want but please don't PM me as On Mobile app there is no notificationfor PM, So id on't read them.
Click to expand...
Click to collapse
Q ; Oh my god!! Thanx a lot Dude. The guide awesome...
A : Ok...If u liked my work you can simply hit Thanks button to apreciate my work and rate this thread five stars
Or you can favour me with a small donation in any form for eg: a recharge
Click to expand...
Click to collapse
karbonn
do uhave usb driver for it
kik4g said:
do uhave usb driver for it
Click to expand...
Click to collapse
Wait foe somw time. I will add everything
Hit thnx for every help
Nd I will also add how to increase internal memory
----------------------------------------------------
Hit thnx for every help
I think no one is interested in development of this phone.. Shud I close the thread???
----------------------------------------------------
Hit thnx for every help
stock recovery not working
luvk1412 said:
Development Section.
I cannot do much development because of the lack of device but can provide u the files.
I also cannot compile cwm But i am providing you guyz the stock recovery image. If you know who some developer Who can compile cwm you can request him to compile one.
Files
Stock Boot.img
Stock Recovery Image
Click to expand...
Click to collapse
BRO u r stock recovery.img is not working in my karbonn mobile tell me how to install it properly.....
---------- Post added at 11:57 PM ---------- Previous post was at 11:50 PM ----------
stock recovery not working.....
kik4g said:
BRO u r stock recovery.img is not working in my karbonn mobile tell me how to install it properly.....
---------- Post added at 11:57 PM ---------- Previous post was at 11:50 PM ----------
stock recovery not working.....
Click to expand...
Click to collapse
Stock recovery is already installed in every mobile
Just press volume up + power after switching on to enter recovery.... (stok) ... It's only there if someone wants to make CWM recovery
Hit Thnx
stock recovery not working
i tried to flash ur given recovery.img in my mobile and now my stock recovery is not loading wid volume + and power button...
what to do now....?????
kik4g said:
i tried to flash ur given recovery.img in my mobile and now my stock recovery is not loading wid volume + and power button...
what to do now....?????
Click to expand...
Click to collapse
Which method used for flashing........ But by the way why u flashed stock recovery if it is always there:what:
----------------------------------------------------
Hit thnx for every help
karbonn
I want to install new recovery to partition my sad card.....
Now plz tell me how to install recovery back to my device...
karbonn
bro how to increase internal memory plz tell before closing it......
kik4g said:
I want to install new recovery to partition my sad card.....
Now plz tell me how to install recovery back to my device...
Click to expand...
Click to collapse
First tell which way used to flash recovery...universal way is u can flash recovery using recovery manager
------------------------------------------
Hit thnx for every help
kik4g said:
bro how to increase internal memory plz tell before closing it......
Click to expand...
Click to collapse
I have found the way ...let me test it first I will post it soon
Till then
Hit Thanks
And kik4g don't u know any person who can make cwm for your phone.... I wud but no time....
If u have time u can use the website by kaushik dutta to build cwm
Google for something like builder. clockworkmod.com..website some thing like that only.....and u need to upload only stock recovery there ...ignore other Files...build will take time so keep which on the time when u uploaded or recovery so that when urs is built u can find it...
------------------------------------------
Hit thnx for every help
karbonn
no i dont know anyone cwm developer...
and bro i flashed my mobile with the help of karbonn service center but now my mobile is not rooting.....
says mountermission denied....
what to do now....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specs
[*]Google it before posting here.
[*]Please post any guides and/or tutorials directly onto the forum, rather than links, otherwise this thread will be closed by the Moderator.
Click to expand...
Click to collapse
Rooting for 8GB Version
Procedure:
1. Download the Framaroot application and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
[ROMs]
Please do not flash the firmware that is not meant for your phone. Flash only 4gb to 4gb and 8Gb to 8Gb
Auxus Nuclea N1 Stock Firmware
NEW
Final Version - 11-Dec-2013 - [Flash with SPFlash Tools]
Click to expand...
Click to collapse
OLD ROMs
Firmware Update (Intermediate V1) 18-Nov-/2013 [Flash with spflash Tools]
NucleaN1_FirmwareUpdate_V1_CWM.zip
Click Here - - [09/Sep/2013] [Flash with SPFlash Tools]
CWM Zip Download from herehttp://d-h.st/b3r
8GB version -
Click Here - [Flash with SPFlash Tools]
Custom ROMs
Click HERE
How to Flash Stock ROM using SP Flash Tools?
1) Unzip the ROM folder
2) Install the drivers and open SP Flash Tools..
Check the below post with images, if you are not sure whether drivers are installed or not.
If you face this problem, then try Firmware upgrade and connect the phone..
You can now safely disconnect your phone and turn it on. The process ends here.
FLASHING PATCH using SP Flash Tool(Single Files)
1)Select Android Scatter File .txt ....
2)Uncheck all files from the below box....
3)Select the correct file you want Flash by clicking it....
4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"
5)A box asks to confirm it...Click Yes...
6)Connect Phone without the battery...
7)It will get Flashed...[/COLOR]
[Recovery]
1) Nuclea N1 Stock Recovery Click Here
2) TWRP Recovery- Click HereThanks to Kumar abhishek
3) CWMRecovery 6.0.3.3 Click Here or Click Here Thanks to C3C076
Procedure to Flash Recovery.
1) Download Mobile uncle tools from play store
2) Place the downloaded recovery.img in your sdcard
3) Open Mobile uncle tools
4) Select 'update recovery' and Click on the recovery.img
5) Reboot
adb method: For advance users:
---------------------------------------------------
Make sure you have all the drivers for your phone installed on your computer.
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
.
How to Backup ur complete ROM
1. In CWM Recovery mode, select Backup and Restore
2. Select Backup
3. Wait till it finishes (May take upto 10 minutes)
How to restore ur backed up ROM from SD card
1. Go to CWM Recovery, select backup and restore
2. Select Restore
3. select the folder in date format (Folder name indicates the time and date when ur backup was created}
4. Wait till it finishes (May take upto 10-15 minutes)
Special Guides for Newbies to get Started
Everything you need to know about Clockworkmod Recovery
How to setup ADB and Fastboot properly
5 Things Every Android user should do
24 Apps Every Android User Must Install
5 Things to know before performing any Android tweak
Thanks to Driodiser
HIT THANKS PLEASE BECAUSE IT WONT COST ANY :angel:
Extend your storage on Nuclea N1
[Extend your storage on Nuclea N1] - Thanks to @kailashnj
Follow the instructions in the post HERE
How to enter into Recovery - Nuclea N1 :-
Code:
[LIST=1]
[*]Turn OFF your phone.
[*]Press & hold Vol(+) button and Power button for 12 seconds.
[B]Stock Recovery[/B]
[*]You will see a laid-down Android symbol with 'No command' message below it. Press the power button once.
[*]You will enter into menu 'Android System Recovery'
[*]Press Vol(-) to roll over options.
[*]Press Vol(+) button to select.
[*]DONE!
[/LIST]
Another options if you are facing trouble going to recovery:
Code:
1. Install Mobile Uncle tool
2. Reboot recovery.
MTK6589 Drivers
Universal Pdanet drivers Click Here
Follow this guide Here
Tools
MTK Android PC Sync Tool V2.1233.1 Click Here
SN_Write_tool_exe_v2.1132.0.rar - 8.27 MB
Guide Here
Driver_Auto_Installer_v1.1236.00 Click here
Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device.
Click to expand...
Click to collapse
How to dump stock recovery image using SP Flash Tool
1) Download and install USB VCOM Driver
2) Download, extract and launch SP Flash Tool
3) Use "Scatter-loading" button to load attached scatter file: MT6589_Android_scatter_emmc.txt
4) Download stock recovery image and place inside the ROM folder. Then select only RECOVERY.
5) Turn off your phone. Make sure USB cable is unplugged. Wait until vibrator indicates it's turned off
6) Click Download button in SP Flash tool, confirm warning complaining about not all files being selected
7) Connect your phone and wait for the flash process to finish (indicated by window with green circle)
8) Unplug USB cable. Hold down Volume+ while turning your phone on to boot into recovery
Click to expand...
Click to collapse
Backing up your IMEI
Different Methods are available for this.
1) Use any RootExplorer to copy file /data/nvram/md/NVRAM/NVD_IMEI/MPOB_001 to your external SD card. (or if that folder does not exists, try /nvram/md/NVRAM/NVD_IMEI/MPOB_001). It is good to backup the entire folder /data/nvram/md/NVRAM.
2) Back up using Mobile Uncle utility. Click on Mobileuncle Tools --> Click IMEI Backup Restore (MTK) --> Backup/Restore
Restore your IMEI
Code:
1- Open Mobile Uncle Tools.
2- Goto Engineer Mode
3- Select Engineer mode[MTK]
4- Under Connectivity Tab go to CDS information
5- Select Radio Information
6- Select Phone1 (for the first imei)
7- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1? (instead of IMEI_1 put your first imei number)
8- hit send command
9- You will / may get a confirmation that "sent to mSend".
10-Now come back and select “Phone2?
11-at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2? (instead of IMEI_2 put your second imei number)
12-Then just reboot the phone.
13- Dial ” *#06#” to Check Imei.
Factory ROM Backup for MT65xx via MTK Droid Root & Tools For BackUp & Unbrick
It's tested and working...
How to install ADB USB driver in window 7
use this method also in window xp,if any driver not install
Google USB Driver Rev 7 ( ADB driver )
inside three dll file driver
1-WdfCoInstaller01009.dll
2-winusbcoinstaller2.dll
3-WUDFUpdate_01009.dll
link
Click Here
Before use it is necessary to check that:
adb drivers are installed. Check device manager--> unknown devices. ADB Drivers attached.
Now the Tool
Credits: umesh gaba
[MOD][4.1 4.2] Extend Phone Storage 1.5, 2.5GB A116 (Other MT6589 Devices on request)
[Solution] NVRAM WARNING: Err = 0x10
Download this zip Click Here
Prerequisites:
You have to backup IMEI of your phone (both sim slot).
Step 1 - Extract the WiFi Fix files and place them in a folder on your memory card
Step 2 - Open Root Explorer
Step 3 - Click on Mount R/W
Step 4 - Click on data
Step 5 - Scroll down to the folder named nvram
Step 6 - Open APCFG folder
Step 7 - Open APRDEB folder
Step 8 - Delete the WIFI and WIFI_CUSTOM files
Step 9 - Now copy/move the files on your sdcard to data/nvram/APCFG/APRDEB and Paste
Step 10 - After pasting both the files, close Root Explorer and REBOOT your phone.
Here is another method Click Here
The bad news is.
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
can you provide a review of the phone?
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Yes, I am in batch II.
dhavalg said:
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
Click to expand...
Click to collapse
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif¬if_t=group_activity
Hi Guys,
Even I have bought this phone and awaiting delivery, I was promised by 4th Aug. Lets see. The specs of this phone seems to be great other than the 4GB storage. I hope that apps2sd works really fine and I am able to store all my game data on the SD card. Wanted to know more info of this phone and the rom.
Regards,
Kailash
can't decide what to buy
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Thanks...
akashavel said:
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif¬if_t=group_activity
Click to expand...
Click to collapse
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
:victory: Yesss... XDA Thread for Auxus Nuclea.. feeling exciting.. Best Wishes, Guy.. :good::good:
dhavalg said:
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
Click to expand...
Click to collapse
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
I prefer to use Titanium Backup to freeze unwanted app rather to uninstall.. this app will save lots of RAM..
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
ashok20205 said:
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Click to expand...
Click to collapse
Yes, We can install Custom ROMs (Themed ROMs or Ported ROMs). But, with kernel sources a lot of development can happen. :good:
akashavel said:
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
Click to expand...
Click to collapse
No need to wait for a Custom ROM. You can try One-Power-guard app, Clean master and Greenify app's.
Chris s5830i said:
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
Click to expand...
Click to collapse
This mobile is good at it price with the spec's. Even Micromax is not providing kernel sources. Also, compared to the support of Micromax, iBerry is doing best.
abhiek bist said:
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Click to expand...
Click to collapse
Check the facebook page. Then you can decide
Can you post link for CWM for nuclea N1
can you help me with the link for CWM
[GUIDE] How to flash CWM or TWRP recovery and root your device!
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
Credits: This root method was found from a facebook group that uses this phone, i am just posting it here. Give thanks to Eduardo Perez!
I ported TWRP recovery for this device and Eduardo did the CWM recovery. Also thank rua1 from XDA for his MTK droid tools. Koush for his driver installer.
USERS OF 4037N/T or any other model that is from T-Mobile, DO NOT TRY ANY OF THE RECOVERIES HERE. NOR TRY TO MOD IT IN ANY WAY. YOU WILL BRICK YOUR DEVICE.
See post #68 for more info
Notice for T-Mobile owners (4037N)(MetroPCS) Users!!
Requirements:
1. A windows PC
2. Universal ADB driver
3. ROOT ALCATEL 4037N 4.4.2 zip file
Instructions:
1. Download the ROOT ALCATEL 4037N 4.4.2 zip file here and extract it anywhere on your desktop.
2. Go inside the extracted folder and extract iRoot zip file and install iRoot. Disable any antivirus you may have or User Account Control(UAC).
3. After installing iRoot, go to your phone and enable USB debugging. Look up how to enable it on google if you don't know how to.
4. Run iRoot as administrator and then connect your phone.
5. Wait until it detects it and then press the root button and your phone will be rooted.
If you want to see a video of the rooting check here
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG. BACKUP TUT HERE
Requirements:
1. A windows PC
2. SP flash tools
3. CWM or TWRP recovery
4. Universal ADB driver
5. MTK preloader driver
VIDEO TUT By nashj1975
https://www.youtube.com/watch?v=xNWALNB9M-Q
[GUIDE] FLASH CWM/TWRP
1. Download the attached files below and extract them anywhere on your computer, then download the FLASHTOOLS and SP FLASHTOOL folder here and extract them.
2. Go to this link to get the drivers specifically for your phone. Install the program after the download is complete.
3. Go to the FLASHTOOLS folder and extract Driver_Windows_MTK_Preloader drivers and then go to auto install and install the drivers. This is for the preloader drivers which will be used later.
4. Install ADB driver by going to the Flash Tool folder and then adb folder, then locate the adb file and run it as administrator. Go to settings, then development if you don't see development go in about and click on the build number 7 times to enable development mode. Enable USB debugging.
5. Open the SP flash tools folder and run flashtool.exe as administrator.
6. If anything pops up just ignore it and click ok.
7. Go to option then connection and make sure auto detect is selected.
8. Go to scatter loading and click it, locate the scatter file from the extracted folder and open it.
9. When it opens click on the recovery option and click the check box.
10. Decide which recovery you want and rename it to recovery.img.
11. Click on the location in the same recovery option and choose your recovery.img
12. Turn off your phone and take out the battery.
13. Click on Download and then connect the phone to the PC.
14. If you did everything i said above, it will flash your chosen recovery.img and you will have a custom recovery.
[GUIDE] ROOT/Superuser
1. Reinsert the battery and turn on the phone.
2. Go to the alcatel 4037 folder that you extracted.
2.Place the root_grouper-tilapia_4.4_update.zip and superuser.zip on your sdcard or internal storage. ( If these root files don't work, just download the UPDATE-SuperSU-v2.46.zip and flash that.)
3. Turn off the phone and boot it into recovery mode.
4. Navigate using the volume keys for CWM recovery or just use touch for TWRP. Use the power button to select.
5.Select install zip from sdcard and choose zip from sdcard. Locate the zip files that you sent.
6. Flash the root_grouper-tilapia_4.4_update.zip first then flash the superuser.zip
7. Reboot your phone and there you go. Root Access
OR
ROOT YOUR PHONE USING THE 360 ROOT Chinese apk attached below.
Copy the 360ROOT.apk to your sdcard either internal or external.
Install it and then follow the screenshots below to see how to root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah i know it says 4032A but it was just to show you how to use it.
After clicking on root your phone will be rooted. P.S You need an internet connection for the root apk to work.
How to unroot
This is a guide for unrooting your device. Download universal unroot from the play store, or look for an apk file.
Install it and bam you're unrooted.
How to make a backup of your device
There are many ways to back up your phone. Some are better than some but you can decide which you want to use.
1. Using recovery . Boot into recovery mode and select backup.
2. Using Mtk droid tools. Connect your device to the PC with usb debugging enabled. Run mtk droid tools as administrator and wait for it to load. Click on the root,backup and recovery tab. Select backup.
3. Using SP flash tool. This is recommended for those who don't yet have root on their device. There is an original post for this method from rua1 here
How to unbrick your device
Unbricking can be done using the One touch upgrade tool from the alcatel website http://www.alcatelonetouch.com/global-en/products/smartphones/pop_d3.html#.VLbhTiwYGzU
1. Download the Mobile Upgrade S 4.2.7 upgrade tool and install it
2. Turn off your device and take out the battery.
3. Reinsert the battery and open the tool.
4. Select your device from the drop down menu 4037 and follow the instructions from the tool.
I am trying to root the fierce 2 but it doesnt seem to flash the twrp recovery even though I am sure I did everything right! Nothing happens at the last step where you said to take out the battery then click download and connect the phone to the PC. Nothing happens the phone just shows the Actel logo and then vibrates and turns of then back on over and over. Any ideas?
Note I did not do step 5
GhostSamuraiX said:
I am trying to root the fierce 2 but it doesnt seem to flash the twrp recovery even though I am sure I did everything right! Nothing happens at the last step where you said to take out the battery then click download and connect the phone to the PC. Nothing happens the phone just shows the Actel logo and then vibrates and turns of then back on over and over. Any ideas?
Note I did not do step 5
Click to expand...
Click to collapse
Use my unbricking method to restore your device, and i don't think Step 5 should be a problem.
Phones not in boot loop it works fine. Just nothing happens when I click download and connect the phone without the battery.
check your pm :good:
sweet my buddys been missing having root since he upgraded from the evolve, even better that there is a custom recovery.
whats the facebook group page cant seem to find it.
https://www.facebook.com/groups/556165774484796/ this is the link to the group on facebook...note the facebook group is in spanish tho so if you want you can use google chrome and let automatic translation do the work for you
Hi..thanks for ur guide...
I'm succesful root my 4035x
Sent from my 4035X using XDA Free mobile app
xmanner77 said:
Hi..thanks for ur guide...
I'm succesful root my 4035x
Sent from my 4035X using XDA Free mobile app
Click to expand...
Click to collapse
great happy that i helped :good:
---------------------
Thread updated!!
Thread is updated with a video showing how to root the phone @Altnot
New Video
New video showing how to root is coming soon! Thanks to junior member @nashj1975. :highfive:
Stock ROM
--
Thanks to OP. Successfully flashed CWM and rooted my OT 4035D (Alcatel One Touch Pop D3 with KitKat 4.4.2). Was unsuccesful with Towel Root, Framaroot and Kingo Root, but this did the trick! I already clicked your thanks button.
CVAngelo said:
Thanks to OP. Successfully flashed CWM and rooted my OT 4035D (Alcatel One Touch Pop D3 with KitKat 4.4.2). Was unsuccesful with Towel Root, Framaroot and Kingo Root, but this did the trick! I already clicked your thanks button.
Click to expand...
Click to collapse
Nice glad i could help
Hi
Thanks
abdullah.alhossain said:
Thanks
Click to expand...
Click to collapse
You're welcome