I'm using KatKiss ROM.
I have installed Plea app to watch my videos from my has.
Most of the files containing ac3 or DTS audio streams.
If I use the default player I have no sound - if I use MX Player all works fine.
Is there a way to enable the default android player to play ac3 and DTS audio streams?
Al
AFAIK, The included Gallery is only set up to play MP4 files. Anything beyond that is not fully supported. IMO, I just stick with MX Player. It has far more support (including AVI and MKV files).
I have never tried them, but also keep in mind that KatKiss 4.3 does not yet have all of the codecs working. It is listed in the first post of the thread. If it works in KatKiss 4.2.2, then it should eventually get support in 4.3.
If it works in 4.2.2, you may want to stick with that until it gets added to 4.3 (watch the first post). If it does not work in 4.2.2, stick with MX Player.
Related
https://github.com/USBhost/MX_FFmpeg is my modified source where i'm building from
You can download recent codecs here ( GitHub releases ) and 1.35.0-1.8.6 here ( Google Drive ).
Also the XDA download tab is no longer updated as for some reason I cant remove them.
INSTRUCTIONS
1. Check which version you need by going to Local Player Settings/Decoder/General
in the Custom Codec tab it will tell you which one is needed (x86,x86_64,neon,neon64/ARMv8).
Note: skip step 1 if your using aio (all in one) version
2. Download the one you need (No need to unzip it)
3. Go back to Local Player Settings/Decoder/General
and tap the Custom Codec tab then select the version you downloaded. DONE!
Frequently Asked Questions (FAQ) :
What's the difference between MX Player Codec Packs on Google Play and Custom Codec?
MX Player Codec Pack not only contains ffmpeg library, It contains many other libraries required to work properly. If you download MX Player from Google Play mostly it will contain the required libraries according to your device architecture. You have to install codec packs from Google Play only if MX Player asks to install. Custom codec is just a modified version of the ffmpeg library used in MX Player. It's modified to include support DTS/Dolby(ac3) audio tracks. So, Codec Pack is mandatory if MX Player asks to install it. Custom Codec is optional and It's required only if you want to play the videos with DTS & Dolby (AC3) audio tacks
Why Custom Codec is not updated even though MX Player is updated?
In Many occasions MX Player may updated without any changes to ffmpeg library. So, Custom Codec will also remain same. The custom codec version required will be directly forced by the player itself. So no need to worry about it. If it's not compatible MX Player will not load at all.
How do I know that my Custom Codec is outdated & needs an update?
Whenever MX Player is updated, It will check the custom codec version loaded. If it's outdated it will show a error message that shows "Custom Codec is out of date. Replace it with the new version". Otherwise there is no need to check this thread for the new Custom Codecs.
...
...
Thanks man!
I was looking for that!
Thanks. Will try it.
This is just what I was looking for. Nice work.
Re: MX Player Custom Codec With DTS Support [v1.7.11]
Many thanks.
Sent from my Sensation using xda app-developers app
Great, thanks a ton!
Watch the movies in mx player 1080p mkv format with DTS audio and 5.1 audio track.My mobile is moto defy arm v7 1.1GHz
new version
Unfortunately Ive just installed new 1.7.12..... so not working..... Wait for ktsamy
Re: MX Player Custom Codec With DTS Support [v1.7.12]
war1 said:
don´t work with galaxy nexus neon codec for mx player 1.7.12
Click to expand...
Click to collapse
What do you meant?
Can you explain the problem you are facing....
Does not play dts audio or any video?
Have you changed the rendering to HW+ or SW not HW...?
In the latest build of MX Player there is no option in preference to enable SW audio with hw playback.
You have to enable SW audio via audio track button if you are using HW rendering instead of HW+ or SW.
I have personally tested neon build and it is working perfectly.
Even my old build also working with the current version.
Sent from my GT-S5830 using Tapatalk 2
When I go to the Decoder section, click on the directory with the files, then MX Player restarts... I'm getting a popup. This is with MX Player 1.7.12 on a Nexus 4 (4.2.2 stock rooted):
Popup says...
MX Player:
Unsupported device or component file corrupted. Please uninstall the application completely then reinstall it if the problem persists.
OK
When I hit the OK button, MX Player closes and when I reopen MX Player, the codec files aren't selected anymore in the Decoder section. I've uninstalled and reinstalled MX Player a few times, also tried just Force Stop ing it, and clearing its cache, but the same thing happens. This was all working perfectly on 1.7.11, so I suspect it's something with the new version of MX Player, but I don't know how to tell what it is.
funtek said:
When I go to the Decoder section, click on the directory with the files, then MX Player restarts... I'm getting a popup. This is with MX Player 1.7.12 on a Nexus 4 (4.2.2 stock rooted):
Popup says...
MX Player:
Unsupported device or component file corrupted. Please uninstall the application completely then reinstall it if the problem persists.
OK
When I hit the OK button, MX Player closes and when I reopen MX Player, the codec files aren't selected anymore in the Decoder section. I've uninstalled and reinstalled MX Player a few times, also tried just Force Stop ing it, and clearing its cache, but the same thing happens. This was all working perfectly on 1.7.11, so I suspect it's something with the new version of MX Player, but I don't know how to tell what it is.
Click to expand...
Click to collapse
yes don't work with my nexus with the same error.
Nexus 7 the same bug..... Please, fix it, thank you!
Same problem
Having the same issue as funtek on my Neuxs 10 with version 1.7.12 of Mxplayer with this codec, both neon and not, tried them both. Same error message.
Your new link that you have posted when you recompiled the codec must have done it. That download is working for me on mxplayer 1.7.12 with no error message or corrupt codec message on the nexus 10. Weird... but very happy, many thanks brother! Must have just been corrupt.
AW: MX Player Custom Codec With DTS Support [v1.7.12]
I'm on a Samsung Galaxy S2 and the Codec in op wouldn't work.
The recompiled Codec works.
Sent from my GT-I9100 using xda app-developers app
AW: MX Player Custom Codec With DTS Support [v1.7.12]
The exact same message as in funtek's post.
I've noticed that the files in the alternative zip are only half the size as the files in op, perhaps the zip was messed up?
Sent from my GT-I9100 using xda app-developers app
Hi, Neon Codec on Galaxy Nexus: MX Player Pro crash after set the custom codec and restart application. Next time launched MX Player, the default codec is used.
Also tested tegra2 codec on Galaxy Tab 10.1 - this one is working fine.
I have a 3.25gb 1080p mkv and I have problem playing using mx player pro.
I have tried to switch to different mode - HW, HW+ or SW, video is fine but I got no sound at all.
If I use a different player like BS Player it works perfectly.
Note: I'm using Nexus 5 w/4.4.2 kitkat + Mx player pro 1.7.28 Armv7 Neon
redjersey said:
I have a 3.25gb 1080p mkv and I have problem playing using mx player pro.
I have tried to switch to different mode - HW, HW+ or SW, video is fine but I got no sound at all.
If I use a different player like BS Player it works perfectly.
Note: I'm using Nexus 5 w/4.4.2 kitkat + Mx player pro 1.7.28 Armv7 Neon
Click to expand...
Click to collapse
Can you post the mediainfo of the file?
If it has dts audio track then you have to use custom codec.
thanks, it's dts.
I have downloaded the custom codec and now it's fine.
However, may I ask why this codec didn't include in mx player in the first place?
Also the one from the google play doesn't work. I had to use this:
http://forum.xda-developers.com/apps/mx-player/mx-player-custom-codec-dts-support-t2156254
redjersey said:
thanks, it's dts.
I have downloaded the custom codec and now it's fine.
However, may I ask why this codec didn't include in mx player in the first place?
Also the one from the google play doesn't work. I had to use this:
http://forum.xda-developers.com/apps/mx-player/mx-player-custom-codec-dts-support-t2156254
Click to expand...
Click to collapse
The detailed answer is in the first post of the custom codec thread...!!!
In short DTS people is not ready to negotiate with SW players. So, to avoid copyright issues it's dropped from the official version.
The tittle says it all. I flashed my sgy with CyanogenMod 11 (kitkat 4.4.4) yesterday. Then, I install MX Player and its codec (Armv6 VFP-for sgy). MX Player is my default media player when I use stock rom and I love it for its performance and functions to play unsupported video file format that internal player cant play. I noticed that CM 11 have problem with something about OMX Codecs (if im right, cant remember, found about it when googling the problem yesterday, but no solution). I tried to play some music videos (mp4 format) with internal player. Yeah, same as stock problem. Can play MPEG-4 but Xvid cant. But this time I cant play x264 mp4 format that previous stock does. Its terribly lag so much. The audio ok. But dont worry though coz I can use MX Player to play that file. Then, i get the same problem, lags. I tried everything, reflash with stock and flash it back with CM 11 rom, use default and custom codec. Still didnt solve the problem. I even tried uninstall the app and reinstall it without the codec. Suprisingly, I can use the app without codec. MX Player didnt ask to install its codec like before when no codecs found. It looks like MX Player use internal decoder as its codec. What the... I even reinstall its codec but it seems like MX Player ignores it. So frustated. Then, im trying to google for any other app that can play various type of video. I found QQPlayer. I wanna give it a try. After install it, still cant play the video. Same problem. But when I look in setting, I found something that the player able to switch between internal decoder and its own decoder. Then, trying to play the video... bla, bla, bla.... and it works. But with a little lag. Not terrible as before. The video and sound is out of sync. Yeah, the same problem when I use QQ Player with stock before using the MX Player. Okay, the real question is, is there any 'switch' for MX Player to choose between its decoder or internal decoder as its codec. I believe that everyone have across the same problem when using CM 11 on sgy. This just QQ Player without any additional codec can play the video with little lag. If MX Player? The problem will solve without any lag and smooth. (maybe, when use its own codec)
P.S. sorry if my english are bad. If any of you didnt understand the question, i can give a bit more detail. Im malaysian and still 15 years old
CM 11 link: ht-tp:-//down-load-.-android-armv6-.-org/_builds-/-totoro/ (remove any dash - ) (dash only!) *still new member, cant post real outside links. sorry if I break the rules*
KazuShi998 said:
The tittle says it all. I flashed my sgy with CyanogenMod 11 (kitkat 4.4.4) yesterday. Then, I install MX Player and its codec (Armv6 VFP-for sgy). MX Player is my default media player when I use stock rom and I love it for its performance and functions to play unsupported video file format that internal player cant play. I noticed that CM 11 have problem with something about OMX Codecs (if im right, cant remember, found about it when googling the problem yesterday, but no solution). I tried to play some music videos (mp4 format) with internal player. Yeah, same as stock problem. Can play MPEG-4 but Xvid cant. But this time I cant play x264 mp4 format that previous stock does. Its terribly lag so much. The audio ok. But dont worry though coz I can use MX Player to play that file. Then, i get the same problem, lags. I tried everything, reflash with stock and flash it back with CM 11 rom, use default and custom codec. Still didnt solve the problem. I even tried uninstall the app and reinstall it without the codec. Suprisingly, I can use the app without codec. MX Player didnt ask to install its codec like before when no codecs found. It looks like MX Player use internal decoder as its codec. What the... I even reinstall its codec but it seems like MX Player ignores it. So frustated. Then, im trying to google for any other app that can play various type of video. I found QQPlayer. I wanna give it a try. After install it, still cant play the video. Same problem. But when I look in setting, I found something that the player able to switch between internal decoder and its own decoder. Then, trying to play the video... bla, bla, bla.... and it works. But with a little lag. Not terrible as before. The video and sound is out of sync. Yeah, the same problem when I use QQ Player with stock before using the MX Player. Okay, the real question is, is there any 'switch' for MX Player to choose between its decoder or internal decoder as its codec. I believe that everyone have across the same problem when using CM 11 on sgy. This just QQ Player without any additional codec can play the video with little lag. If MX Player? The problem will solve without any lag and smooth. (maybe, when use its own codec)
P.S. sorry if my english are bad. If any of you didnt understand the question, i can give a bit more detail. Im malaysian and still 15 years old
CM 11 link: ht-tp:-//down-load-.-android-armv6-.-org/_builds-/-totoro/ (remove any dash - ) (dash only!) *still new member, cant post real outside links. sorry if I break the rules*
Click to expand...
Click to collapse
Both H/W & H/W decoders use your system's inbuuld codecs. So, any issue in codec configuration will lead to issue.
S/W decoder needs powerful CPU. So, it will be obviously lag in your device.
FYI,
AndroidArm6 is community made Project.
They use their self developed libraries since the source codes are not provided by Qualcomm. So, don't expect that it will perform like stock.
now i get it. so, there is no use if there is a 'switch' or not, still the same right? yeah, well, at least i know that. thxx... i decided want to use stock rom now, maybe with some kitkat themes...
When MX player lost its support to play AC3 audio I have found on the internet instructions how to fix it. I downloaded the AIO 1.7.32 codec package zip and set the MX player to use them. Despite this fix the problem still persists. (I think tegra 4 is not supported with this codec package)
Using this codec package Shield is able to play AC3 audio only for very short period of time.
Is there any other way how to make MX player play the AC3 audio?
use vlc less problems
My MX Player works so far properly after I changed the SW codec to HW+ one (I also use the AC3 external codec package) . There are also setting for SW/HW audio codec, just play with it.
hello,
I might buy the Galaxy S8 Plus ( Snapdragon Model ) soon but need to make sure it can play an h.264 10-bit video using hardware decoding.
name of the video: [1080p][16_REF_L5.1][FLAC_5.1]Suzumiya Haruhi no Shou****su BD OP.mkv
this is a link for the sample video:
https://www.koi-sama.net/files/hi10/
I really appreciate the help, thank you.
I tried them on my Verizon 8+ and get "unsupported video codec" using the default video player.
I have not tried d/l VLC or an alternative to see if that works, it may.
could you please check using mx player h/w+ or h/w
MX Player hw+ doesn't seem to have a problem with any of the sample video decoding, got a complaint about unsupported audio (AC3) on one of the files though.
thank you for your help, I just purchased the phone ( G955U ) and it isn't working on hw+, is there a Rom or kernel you are using?
I'm using bone-stock as provided by Verizon, with all current system updates.
Videos d/l to local SD card and played off that from within MX Player. I noticed some traffic where spawning video playback via file explorer may not work in some cases so I opened the file directly in MX.
The MX Player I used was the free edition, freshly installed.
I have since bought MX Player Pro, and of course it works on my device.
System performance settings are at the default, no tweaking so far (phone is 4 days old).
Good luck, sorry I don't have more help to offer, still new with the device.
thanks for all your help, I really appreciate it.
If you haven't installed their codec pack, get it. I think it will fix your problems: MX Player Codec (ARMv7 NEON)
hello, tried it and didnt work, it does run 4k hevc 10-bit using hw but cant run h.264 10-bit unless I use sw (works well but fast battery drain).
thank you
Runs smooth and without problems or lags with the mx Player pro with the sw decoder. The hw decoder doesn't Work.
i use hw+
along with a custom codec for ac3
Yep custom MX codec canm be found here on XDA forum - use search.
It's up to 1.9.0... Anything older will get an "update codec" message....
I tried but no luck, it works on sw only, what is your phone's model?
mine is G955U Sprint Unlocked. all other codecs work ( even hevc 10-bit 4k ) but h.264 10-bit is only working on sw.
How do you setup the custom codec for AC3 (I recognize I'm being lazy by just asking...but I have a headache...)?
For C0derbear
Put on root directory of phoner or sd card and start MX player. Go to settings, and select "custom codec at bottom of list in decoder settings. Select codec with browser it opens.
That's if it doesn't detect the custom codec and ask to use it.
It will restart to apply codec...