Hello everyone!
Performance Control is A CPU Control application bundled with AOKP (created by xoomdev).
I started modding and adding features to this application, with @educk, few months ago and now we decided to create a dedicated thread.
Functions:
Change CPU Governor, I/O Scheduler and Clock Speed
Battery information + Fast Charge setting + Battery Life eXtender setting
Change Voltages Assigned to each CPU frequency
Customize MinFree Task Killer (set the amount of RAM the minfree taskiller will keep), Not Killable Processes feature
Customize SD read-ahead
VM Settings such as: Dirty Ratio, Dirty Backgroud ratio, Dirty expire centisecs, Dirty writeback centrisecs, Minfree kbytes, Overcommit ratio, Swappiness and VFS Cache pressure, Dynamic Fsync, Backlight timeout, Backlight on touchscreen, Phantom Key Presses Filter
Integrated CPU Spy
Linux Kernel informations, CPU Informations, Memory Informations
Disk Informations
Tools: Custom shell command, Wipe cache+dalvik cache, Flash kernel or recovery (img files), Clean residual files, Optimize DBs
Depending on the kernel used, some application features will not be accessible, like: Voltage settings, Battery Life eXtender, etc
Requirements:
Root
Busybox
CM or other AOSP like ROM based on 4.0+ (tested only on 4.2.2.& 4.3)
For kernel developers:
Dynamic Fsync
Not Killable Processes
VDD Sysfs Interface - MSM7x30 boards
BLX (Battery Life eXtender)
Dynamic management of dirty page writebacks
APP is Licensed under GPL v3.
App sources here | Screenshots here | Download HERE
TIPS:
- You can open system battery informations by clicking on voltage value in Battery tab
- You can increase or decrease voltages by 25mV steps in Voltage Settings tab using menu
- You can change fast between flashing kernel or recovery using menu
- Switch fast between tabs using menu > Tabs
- Show / Hide Tabs feature in Meniu > App Settings
Changelog:
v2.2.5 [07.09.2014]
added the possibility to reorder tabs (menu > app settings > set tabs visibility - long press to reorder items)
updated spanish translation thanks to @DaniPhii
updated romanian translation
v2.2.4 [26.07.2014]
added backup/restore settings (menu > app settings)
all core status are displayed now on cpu settings tab
fixed issue with kernel/recovery backup custom names
updated russian translation thanks to @LeroViten
v2.2.3 [04.07.2014]
check for su & busybox at startup just once and when the rom is changed
updated russian translation thanks to @LeroViten
added support for GT-I9082 thanks to @TripRex
Old changelog:
v2.2.2 [30.06.2014]
added kernel/recovery backup option
Download: http://forum.xda-developers.com/showpost.php?p=53804588&postcount=675
v2.1.19 [20.05.2014]
added LiveOC support (not tested) - CPU Advanced TAB
changed boot toasts with notificaton
changed app icon
added option to restore settings from init.d script (some settings may be overwrited by system) - App Settings menu
v2.1.18 [09.05.2014]
fixed UI issue for some devices
fixed min/max freq issue for some devices
added support for S4 mini f4ktion kernel ( thanks to @F4k )
updated german translation thanks to @DF1E
updated russian translation thanks to @LeroViten
v2.1.17 [04.05.2014]
fixed issue with voltage tables in microvolts
v2.1.16 [03.05.2014]
Update Russian Translation thanks to @LeroViten
Updated Spanish translation thanks to @Garcia98
Added Nexus 5 (thanks to @educk) and Xperia U (thanks to @Garcia98) on supported devices list for kernel/recovery flash
Some small improvments and issues fixed
v2.1.15 [26.04.2014]
add support for krait undervolting (CPU Advanced Tab)
add support for Performance Profile
Any change of cpu freq. or governor will update Performance Profile default values (no need to reopen app. )
v2.1.14 [18.04.2014]
added support for voltage table located at: /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
fixed some issues with multicore devices
v2.1.13 [12.04.2014]
fixed sysctl editor issue
rewrite KSM/UKSM for compatibility with UKSM variants
added posibility to override sd path (menu > app settings)
added cpu information (cpu settings > menu)
added memory usage (memory tab > menu)
remove info tab
added some settings in cpu advanced tab
v2.1.10 [07.02.2014]
added IO Settings (menu CPU Tab)
added WIFI PM (Advanced Tab)
added Multicore PowerSaving (CPU Advanced Tab)
fixed zram display bug on multicore
some UI changes
update translations (thanks to @Rhonin86, @Stefano187, @DaniPhii, @LeroViten)
v2.1.9 [24.01.2014]
Added builtin automatic check for updates and posibility for download using Download Manager (menu > app settings)
Zram disk size display in Mb and percents
Started support multicore (new tab available CPU Advanced: mpdecision, intelliplug, ecomode, screen off max frequency, screen off min frequency- more will be added)
Tips: Tap on current frequecy to change cpu. LongTap to force cpu online/offline
Fixed some FC ( many thanks to: @dabl8, @Darian71, @houssam10001 )
v2.1.9 BETA 2 [05.01.2014]
You must uninstall previous version before installing the new one
Fixed compatibility with KK
Added logcat and dmesg dump (Tools Tab)
Added touchscreen control: s2w, h2w, etc (Advanced Tab)
Fixed zram
v2.1.8 [05.11.2013]
Fixed VM Settings & SysCtl Editor bug ( values not saved )
Added ondemandplus governor as settable
Added Spanish translation ( thanks to @DaniPhii )
v2.1.7 [03.11.2013]
Added SysCtl Editor - Tools Tab
Reworked VM Settings based on sysctl - it is necessary to reenter vm values
Added Simplified Chinese translation (thanks to @cyaniris )
Auto reload application after change tab visibility
v2.1.6 [26.10.2013]
Added Vibration Control - Advanced Tab
Added Extended VM Settings - Advanced Tab (remove VM Tab)
Support for Ultra KSM
Show / Hide Tabs feature in Meniu > App Settings
v2.1.5 [20.10.2013]
Added zRAM settings in Memory Tab
- thanks to @educk to achieve the kernel with zram support -
- tested only with zram module builtin kernel -
Added BuildProp Editor in Tools Tab
v2.1.4 [27.09.2013]
Fixed Dynamic Frequency Scaling issue (tested by @etch04)
v2.1.3 [26.09.2013]
added freeze / defrost packages (use menu to change between system and user packages)
added governor settings (not available for all governors)
move VM settings in a new tab
added Dynamic frequency scaling (not tested) http://forum.xda-developers.com/showthread.php?t=2308040
added italian translation thanks to @Stefano187
remove /data/PerformanceControl file
v2.1.2.1 [14.09.2013]
FC fixed when KSM not supported by system
v2.1.2 [13.09.2013]
Added KSM Settings in Memory TAB
Added more devices (for kernel and recovery flash) https://github.com/horn3t/android_packages_apps_PerformanceControl/blob/jb2/res/raw/devices.xml
v2.1.1 [06.09.2013]
Fixed loads of Force Closes on various devices
Added the possibility to individually delete residual files
Updated German Translations (thanks to Rhonin86)
Added Russian Translations (thanks to LeroViten)
v2.1.0 [29.08.2013]
Additional information's on DiskInfo tab (tap on each partition)
Added the ability to flash kernels/recoveries from ZIP too. (It doesn't have to contain META-INF)
Added the list of files from "Clean residual files"
v2.0.9 [24.08.2013]
Fixed Force Closes when setting TaskKiller values
v2.0.8 [22.08.2013]
New DiskInfo TAB - display the total and free space of: /system. /data, /cache, /sdcard, /ext-sd partitions
Added Optimize Databases (SQLite Vacuum) - Tools Tab
Change Fix Permission script for better compatibility with CM-10.2
Added Tab Menu (manage all tabs from one window -> accessible through the Menu key)
Added German and Romanian translations (thanks to Rhonin86 and Laurentyu1995)
Minor Bug Fixes
UI Improvements
v2.0.7 [16.08.2013]
Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
Added "Fix Permission" option (as it is removed from newer CWM recoveries)
Added "Clean Residual Files" option
Minor fixes
Download links now available in DevDB.
SGS3 support in future? because it looks pretty good and i wanna test.
Sent from my girls pants via Tapatalk IV
The best app for any custom kernel
Good job guys
Thank you
Sent from my GT-I8150 using xda premium
This is really cool !! Good job guys !! Many THANKS !!!
Sent from my GT-I9001 using xda app-developers app
Cartman44 said:
SGS3 support in future? because it looks pretty good and i wanna test.
Sent from my girls pants via Tapatalk IV
Click to expand...
Click to collapse
The app will work on any Android device which meets the requirements from the first post.
The only thing which currently doesn't work on SGS3 is the kernel and recovery flash. We will add this support for the SGS3 in the next release.
Sent from my GT-I9001 using xda app-developers app
Hi guys!
Version Performance Control v2.0.7 is available. Download link is second post.
Changelog:
Code:
[B]v2.0.7 [16.08.2013][/B]
*Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
*Added "Fix Permission" option (as it is removed from newer CWM recoveries)
*Added "Clean Residual Files" option
*Minor fixes
Holly shot!!! This app is getting sick cool!
Thanks guys, you've done an huge amount of job!
Sent from my GT-I8150 using Tapatalk 4
Thank
Hello all, I need 10 posts so Hurry and here
The application works great on Unofficial Carbon -
Thank you for it, and I look forward to more changes.
Regards writing using google translator
Awesome application,worx perfect on my LG Optimus L5 e610 with CM10.1.Great work,keep it up.Thanx comes later im limited for today.:thumbup::thumbup::thumbup:
GREEETZ WITH BEATZ!!!
CM 10.1 A8 GT-i8150
"Clean Residual Files" seem to not work app crash. (but what does it do exactly)
governor and scheduler doesn't set on boot, CM performance take control.
anyway great app
thanks
i dont have battery and voltage settings..kernel related limition?
EDIT: i just rebooted and when i checked on perfomance control it got reverted to the rom preinstalled version
fdc77 said:
CM 10.1 A8 GT-i8150
"Clean Residual Files" seem to not work app crash. (but what does it do exactly)
governor and scheduler doesn't set on boot, CM performance take control.
anyway great app
thanks
Click to expand...
Click to collapse
Force close the app
Then clear data of it ..
It is working fine here
Sent from my GT-I8150 using xda premium
boyheadkick said:
i dont have battery and voltage settings..kernel related limition?
EDIT: i just rebooted and when i checked on perfomance control it got reverted to the rom preinstalled version
Click to expand...
Click to collapse
Voltage Settings and Battery tab missing because your kernel. If your PerformanceControl is a system app you must replace it not just install.
fdc77 said:
CM 10.1 A8 GT-i8150
"Clean Residual Files" seem to not work app crash. (but what does it do exactly)
governor and scheduler doesn't set on boot, CM performance take control.
anyway great app
thanks
Click to expand...
Click to collapse
Clean residual files delete files from "/data/log","/data/tombstones","/data/system/dropbox","/data/system/usagestats","data/anr"
EDIT: if you want to use PerformanceControl app you must deselect CM performance.
@ the dev:can i have your permission to take it in a custom rom,i give proper credits for sure.thanx in advance.
-CALIBAN666- said:
@ the dev:can i have your permission to take it in a custom rom,i give proper credits for sure.thanx in advance.
Click to expand...
Click to collapse
of course you have
many thanx,will pressed later.
Really great app. It's easy to customize all of the kernel features.
Every custom ROM should have it. :good:
Madridii said:
Force close the app
Then clear data of it ..
It is working fine here
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
done but it doesn't work for me on any reboot and any governor i set it Always return ti "interactive" like CM standard setting
i'm using kernel 3.4.57 revert by leroviten i don't think it's a problem
Related
now modified(and optimized) work with NEO Arc Play X10 X8 LG Optimus Speed Samsung Galaxy and maybe others....
set voltages on
/proc/overclock/ mpu_opps
/sys/devices/system/cpu/cpu0/cpufreq/ vdd_levels
some functions only work if Kernel support it!!
##########################################################
in the latest version SetXperia can Set Vsel ( motorola milstone style ) ... But SetXperia doesnt load Overclock.ko for you like SetVsel it did, you have to use MilestoneOverclock for this.
##########################################################
Overclocking Undervolting Tool for Sony Ericsson Neo.
Save Akku Power and set CPU Scaling to minimum while Screen is Off.
Set Profile on Low Battery
Set Profile on ScreenOff
With setvsel you can set Vsel OnDemand or Performance
it include a stability test to ensure you settings are stable
Includes System Tweaks like:
-Set sdCard readahead KB ("/sys/devices/virtual/bdi/179:0/read_ahead_kb")
-Set VM Min Free Memory ("vm.min_free_kbytes")
-Remount Storage with NoAtime on Boot
-Overclock
-Undervolting
-Systeminfo like cpuspy
-profiles like setCpu, NoFrills CPU Control
-voltages like IncrediControl
Need ***ROOT*** AND maybe ***Custom Kernel***
GET IT HERE ;o) --->>>
updated version 1.02:
-removed the lag when executing "su" command..
-implemented "remount with noatime"
updated version 1.03:
-fixed FC on call off stabilitytest
-added systeminfo into menue
updated version 1.04:
-fixed force closes on unsupported devices
update version 1.05:
-fixed some bugs
-added IO scheduler
-optional without CPU Speed Icon
update version 1.06:
-few bugfixes
-added "toggle wifi" to notify bar menue
update version 1.08:
-bug fixes
-new design on notifymenue
-option to save & restore settings to sdCard
update version 1.10:
-now shows all governors and all schedulers
-new feature to search updated systemapps like i.e. "/data/app/maps.apk" and move them to /system/app. this saves some MB on /data partition
-notification on "values not save" condition (when setxperia applies values at boot, it marks this vales "save" after 30sec. to prevent boot loops)
update version 1.11:
-new option to Apply Speed and Govenor on the Fly in Profiles Menue
update version 1.12:
-small bugfixes
update version 1.15:
-updated systemcleanup tool
-updated layout for small screens
update version 1.16:
-updated systemcleanup tool
*Update System File
*Uninstall Update
*Move App to /data/app
*Move App to /system/app
*Delete System Apk
*Uninstall App
*Search Market for Updates
update version 1.18:
-new tool "moduleloader" can load kernelmodules like cifs.ko or usb-storage.ko on startup ;o)
update version 1.20:
-bugfix in moduleloader
update version 1.22:
-new Magnetic Field CarDock activator (use standart CarMode)
-optimized System Clean up
update version 1.23:
-added a Volumecontrol to longpress Searchbutton (i changed my keylayout to get a free hardwarebutton for FPSE ;o) )
-fixed screenlayout for smallscreens i.e. xperia mini
-many bugfixes !
update version 1.24:
-bugfix if CPU Icon is Disabled the Timer is completely off
-still shows batt% info (the notify is only updated on batt change)
-new design of CPU Icon (white bars on transparent background)
-profileeditor has now a rangebar for min/max cpu (this prevent from setting low max as min)
-split SystemCleanup in seperate APK look at 'more from inteks' ;o)
-a few perfomance tweaks and fixes
update version 1.26:
-this version remounts sdcard with 'noatime' (if selected in settings) when phone is disconnected from PC
update version 1.27:
-optimized ui/workflow
update version v1.30:
-many bugfixes and improvements
update version 1.32:
-bugfix for phones with OMAP3 processors like Motorola Milestone, Defy
update version 1.35:
-fixed a bug on motorola phones where in ProfileEditor the min/max are inverted
update version 1.36:
-added a "load current" button in voltage editor
-added hires icon for ICS
-put volumecontrol into a scrollview for small displays
update version 1.37:
-fixed a bug with the "load current" button in voltage editor.
update version 1.38:
-bug fix for missing i/o scheduler
update version 1.39:
-added translation (for German)
-optimised error handling
-optimized screen layout
update version 1.40:
-added the option to create swapfile (/sdcard or /cache) @ boot
update version 1.41:
-bugfix -> create swapfile in background now to prevent ANR Error
update version 1.45:
-a few ui changes
update version 1.48:
-added the option to set swappiness for swapfile
update version 1.50:
-execute /sdcard/userinit.sh at boot
update version 1.52:
-added option to edit /sdcard/userinit.sh on board.
-added zram support
-added CM10 support
-added support for
/sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
for tegra voltage control
-a few bugfixes
update version 1.54:
-fixes volumecontrol
update version 1.55:
-bugfixed
update version 1.57:
-you can use now zRam and Swap the same time (if your kernel support this) zRam get the higher priority!
update version 1.58:
the new version supports the following actions:
Code:
<action android:name="com.SetXperia.Inteks.org.APPLY_PROFILE" />
<action android:name="com.SetXperia.Inteks.org.PICK_PROFILE" />
profilename is in -> intent.getStringExtra("profile");
this is to switch OC profiles from SmartQRTags but should also work from other apps i.e. Tasker
update version 1.61:
-added chargecontrol if "/sys/kernel/fast_charge" exist
update version 2.04:
-is more battery friendly now
-an option to select an alternative cpu govenor while playing music over a2dp
reserved for updates
update version 1.12:
-small bugfixes
Awesome. Using it and everything works Fine
Sent from my SO-01C using XDA App
update version 1.15:
-updated systemcleanup tool
-updated layout for small screens
Thanks bro. It's look great.
update version 1.16:
-updated systemcleanup tool
*Update System File
*Uninstall Update
*Move App to /data/app
*Move App to /system/app
*Delete System Apk
*Uninstall App
*Search Market for Updates
i have only a rooted Arc on Stock 2.3.4.
What functions can i use with SetXperia without a custom kernel ?
And is there a HOW TO Guide how to use this Tool ?
dubist said:
i have only a rooted Arc on Stock 2.3.4.
What functions can i use with SetXperia without a custom kernel ?
And is there a HOW TO Guide how to use this Tool ?
Click to expand...
Click to collapse
the only function you can NOT use is custom voltages.
the cpufreq goes only up to defaultmax of your phone but you can make profiles with diffrent govenor and/or threshold or limit max cpu frequency to save power...
i use it at the moment without custom kernel. for the systemtweaks and to lower the up_threshold a bit witch make the phone a bit snapier
have fun
inteks
ps: i hope that there is no guide needed, everything should be selfexplaining... if not ask.
Ok.
I want that the cpu voltage go back when the phone goes in standby.
And can you Tell me which changes you have done ?
update version 1.18:
-bugfixes
-new tool "moduleloader" can load kernelmodules like cifs.ko or usb-storage.ko on startup ;o)
update version 1.20:
-bugfix in moduleloader
dubist said:
Ok.
I want that the cpu voltage go back when the phone goes in standby.
And can you Tell me which changes you have done ?
Click to expand...
Click to collapse
no need to the lower the voltage when screen is off. if the cpu needs 750mv for 122mhz it need it no matter if screen is on or off....
you can limit the max frequency to i.e.122mhz because it is no problem when checking for emails takes a bit more time while screen is off
btw. govenors like smartassv2 handle this for it self , no need to set a screenoff profile.
more interessting is to set a powersave profile while batt is below i.e. 30%
set the max cpu frequecy to 75% and the up_threshold to 99% for that
have fun
inteks
is this working on 2.3.3(4.0.A.368)? installed but doesn't launch. icon is on notification bar though.
Nice app is there any chance of been able to turn the icon off that sits in the status bar and the one in the notifications as well please.
Sent from my Nocturnal revolution X10i using XDA Premium App
Futura2000 said:
Nice app is there any chance of been able to turn the icon off that sits in the status bar and the one in the notifications as well please.
Sent from my Nocturnal revolution X10i using XDA Premium App
Click to expand...
Click to collapse
you can switchoff the icon in settings . but without the notify entry you wont be able to select profiles .... ;-)
update version 1.22:
-new Magnetic Field CarDock activator (use standart CarMode)
-optimized System Clean up
Nice! Can you please explain what these modules do? Looks interesting.
sdio.ko
tiap_drv.ko
tiwlan_drv.ko
Hey, I downloaded this and soon after I noticed my phone was lagging a lot like I press a menu and 3-5 seconds later the menu/option would open so uninstalled.
My thoughts while I was using it was,
No exit button that I could see,
Took a while to open at first.
I'm on a rooted ARC FW:4.0.2.A.0.42 with DooMKernel with some system apps removed.
Jinx13
Hi dev
See this :
This's setxperia installed on xperia mini pro (sk17i) w/ DooMKerneL.
That not fully show in my phone.
Sent from my SK17i using XDA Premium App
This app is really useful but at the same time confusing.
I dont understand quite a number of tweaks that is available in this app
like CPU ICON INTERVAL. I am using Xperia play and x10 mini
are there any guides on each individual phone.
Hi,
A new voltage control and CPU adjuster app is in the city...
For root users, this app allows to create and automatize CPU and GPU via a profiles manager.
For non root users, you're able to get information about the CPU (governor, speeds, etc).
You can define profiles that contains:
- CPU governor
- Max CPU Frequency
- Min CPU Frequency
- Enable/Disable cores in dual/quad cores (if kernel supports)
- CPU voltages for all frequencies (if kernel supports)
- I/O Scheduler
- GPU frequencies, voltages, stay on and thresholds (if kernel supports)
- Charger voltages (if kernel supported)
- Governor parameter tweaks
You can define profiles that are automatically activated on these conditions:
- Battery low
- Temperature higher
- Screen on/off
- Charging
- Connected to PC
- Voice call started
- Active application
Also, you can view CPU information, like times in state, governor max/min speed and much more.
XDA title page (Dec, 2 2012): http://www.xda-developers.com/android/manage-your-cpu-with-cpu-adjuster/
Used permissions
- Write external storage: To backup profiles
- Receive boot completed: To automatically start service on boot (enable in settings)
- Read phone state: To automatically detect voice call start/stop
- Get tasks: To get active task (in order to correctly apply profiles that depends on the active task)
- Internet: Added small ads (via google ads)
- Billing: For donation control (you can purcharse PRO version inside the app)
- Battery stats: Needed to show the screen on time and battery up time
If you've troubles or issues, please, send a logcat.
Free version includes Ads, is limited to 3 profiles and isn't capable to make backup of your settings.
You can buy the full version inside the app in order to remove Ads and get full app capabilities.
Please, is the app doesn't works (partially or totally) send a message to [email protected] or post in this thread.
Play Store Link
https://play.google.com/store/apps/details?id=com.ryosoftware.cputweaks
Translation interface
You can add language translations using the link: http://www.getlocalization.com/CPUAdjuster/
ROM cookers
You are able to include this app in your ROMs at your discretion but you meet the following rules:
- Can't theme the app
- Can't make any modification in the app
- Can't resign the app
- Thank in the ROM thread
- If you're interested to set default values for any parameter in your ROM, you can contact via PM or email
PLEASE, IF YOU'VE ISSUES: CONTACT
DIRECT DOWNLOAD
CHANGELOG
1.0.0
First release
1.1.0
Added charger voltages to the profiles view
Added 30 seconds delay before first profile activation (after on boot event)
Added a file in /sdcard/CpuProfiles/files-initialization.log to control missing files (post if app shows the missing files message)
Added a file in /sdcard/CpuProfiles/automation.log to control the automatically activated profiles
Added compatibility with Android 2.2 (Froyo) and higher
Added ads in the main activity
Solved bugs
1.3.0
Removed toast on service start/stop
Added compatibility with old devices
Added more compatibility with charger voltages
Added more compatibility with gpu voltages
Added current voltages in cpu history tab
Added battery info to the device info tab
Added notification at startup to countdown the service autostart
More accurated kernel info in the device info tab
Corrected some strings
1.4.5
Added more support to overclock/underclock
Added support for non rooted devices (in read mode, of course)
Added in app billing donation
Expanded voltages in profiles voltages view by default
Number of processors is correctly counted in quadcore processors
Added option to modify all voltages at the same time (in cpu voltages view and in gpu voltages view [in profile edition])
Small UI improvements
Added german translation (thank's to [email protected])
Added french translation (thank's to The [email protected])
Added spanish translation
1.4.6
Added ability to disable profiles
Small strings update
1.5.0
Enable/disable second core for profile (only available for Tegrak dual core)
Profiles are now marked disabled after creation or edition (for security purposes)
In profiles list, if you edit the active profile, the active profile mark dissapears
1.5.1
Fixed issue with some kernels that don't exports CPU frequencies
1.6.0
Graph with CPU speed evolution (it can be run in background, for statistical purposes)
Ability to clear history (time in states)
UI improvements (subtitle font color themeable and other small changes)
1.7.0
Corrected bug in CPU history percents, they miscalculate afther a clear
Compatible with more devices
Capable to show real history (even if you've previously cleared)
Bugfixes
1.8.0
Capable to activate/deactivate single cores in quadcore processors (SGN-II, ...) [if kernel supports it]
Added some dialogs in profile settings in order to clarify
1.8.1
Corrected bug in CPU speed statistics (for kernels that doesn't export CPU frequencies)
Updated translations
2.0.0 (important notice)
Compatibility with more devices
Added per-app activation to profiles
UI improvements
Added current GPU speed to the general info tab
Notifications can be show in toasts or in status bar
Added CPU history graph in general tab
Added GPU current speed in GPU tab (in profile edit view)
Added GPU minimum time in state for profile (this is the minimum time that GPU remains in a state even if charge load changes)
Added portuguese translation (thanks to [email protected])
2.0.1
Small bugfixes
Added setting to configure the startup notification behavior
2.0.2
Small bugfixes
Add toggle to show CPU speed in general tab in text or graph format. Simply click in the graph to show CPU speed in text format or in the text to show the graph
2.0.3
Cosmetic changes
Toggle in profiles tab show service status nor the user enable state (this only affects after a upgrade)
2.1.0
Added ability to overclock GPU (kernel/device specific feature)
Solved service status toggle issue
GPU management compatible with Siyah kernel
Upgraded to In-App billing v3
Bugs fixed
2.1.2
Little bug corrected
2.1.3
Small improvements
Small UI changes
More accurated GPU speed calculation (useful for devices that uses non standard speeds)
2.3.1
Added GPU up/down thresholds
Added GPU help dialog (press menu key in GPU tab in Profile Edition activity
Tweaks for specific governors: ondemand, lulzactive, smartass, conservative and interactive
Solved issues with trial period calculation
Added battery up time to general tab
Added screen on time to general tab
Removed auto update of general tab (except for CPU and GPU speed) [really isn't needed and stress up the cpu]
Added refresh button to general tab
Added chinese translation
Minor UI changes
2.4.0
Enable/Disable group of tweaks in each profile
Solved bug when upgrade and SuperSU is set to forget permissions on reinstall
2.4.1
Added tweaks for pegasusq
Added switch to show governor parameter descriptions in english (more accurated)
Bugfixes
2.5.0
Capable to apply your settings on-the-fly, without define a profile
Linked up and down thresholds in GPU
Internal improvements
2.5.5
Added total/free RAM in general tab
Internal improvements in superuser adquisition
2.5.6
Added support for kernels that don't export GPU thresholds
2.6.0
Added support for custom init.d scripts (look in settings)
2.6.1
Added support for some MALI parameters (look in profile advanced tab)
Added hungarian translation (thanks to szornyu)
2.6.2
Added ability to create folders (from init.d scripts folder selection)
Removed 14 days demo period (no expiration time now)
2.6.3
Small improvements
Updated translations for french, hungarian, chinese and german
2.6.4
Added shortuts to running apps and battery usage in CPU general tab (click in the six last items)
2.6.7
Added improvements to ROM cookers support
2.6.8
Added italian translation (thanks to [email protected])
2.6.9
Compatibility improvements
2.7.0
Activation times for profile (statistical info) in profiles tab
Setting to control if frequencies are set before or after the voltages
Information dialogs
2.7.3
Solved little bug when calculating profile active times
Added boot delay timeout (from 0 to 90 seconds, default 30 seconds)
Updated german, hungarian and italian translations
2.7.4
Updated german, hungarian, chinesse and italian translations
2.7.5
Correct bug calculating profile activation time
Updated german translation
2.7.6
Improvements in the init.d folder selection dialog
Added a handbook to the /sdcard/CpuProfiles folder
Minor updates in chinese, hungarian, italian, deutch and french translations
2.8.0
Profiles sorted using priority value
Apps selector sort list using the app label
Added max CPU frequency when screen if off (if kernel supported)
Shows multicore information for each core separately (CPU speed, CPU history) (if kernel provides the information)
Added battery temperature to general tab
Removed capture statistics activiy (really isn't needed)
Added russian translation (thanks to DEADover)
2.8.2
Max/Min GPU voltages calculation update
Added changelog (goto settings)
2.8.3
Corrected bug in max/min GPU voltages calculation
Updated translations
2.8.4
A bit un-stresses CPU when calculatin the current CPU speed in general view
Added partial slovenian translation (thanks to MMtranslating)
2.8.5
Added new superuser permission to manifest
Solved certain issues with Galaxy Nexus
Updated Slovenian translation
2.8.6
Compatibility with max/min/governor for kernels that don't shares the cpu core values
Solved issues with notifications when a core is disabled and you want to show the current CPU speed or history
Removed apps selector for screen off profile (has no sense)
Updated Slovenian and russian translations
2.8.7
Added new profile type: After boot active for X minutes
2.8.8
Check app signature at startup
Updated translations
2.8.9
Corrected bug in profile apps selection
Updated translations
2.9.0
Added more control in governor tweaks in order to test if files exists before set the values (prevent fails if files don't exists)
Added support to kernels that uses no standard values to set the CPU voltage steps (like Kowalski for LG Optimus 2X)
Added support to kernels that limites min/max GPU frequencies (like Perseus for Samsung Galaxy Note II)
2.9.1
Logcat for the app is set to false by default (enable it in settings if you need send a log to me)
3.0.0
Added ability to send logs to the developer without use any external software (go settings to generate and send it)
Added ability to export logcat to sdcard (normal and colored log) [PRO feature]
Added graceful time to In-App license verification (for those that has a unstable connection)
Added beta channel (enable it in settings and receive updates directly on your device) [PRO feature]
Preferences activity resorted
Solved issue in some devices that aren't running application after boot if screen is off
3.0.1 (only in Beta Channel for now)
Tweaks for more governors
3.0.3 (only in Beta Channel for now)
Corrected bug in Beta version mamagement
3.0.4 (only in Beta Channel for now)
Added tweaks for more CPU governors
Added tools menu (only option is "forze media scan" for now)
3.0.5
Includes all unreleased beta code in the general app
Compatibility updates
3.0.6
Bug corrected
3.0.8 (only in beta channel for now)
Uses real external storage unit for backup/restore in Samsung devices, if available
3.0.9 (only in beta channel for now)
Added general kernel preferences that are loaded in boot time (if configured)
For now general preferences includes ability to set max. battery charge percent and force fast charge (all features are kernel dependent, of course)...
3.0.10 (only in beta channel for now)
CPU voltages interface supports most kernels for Nexus4
3.0.11 (only in beta channel for now)
Allow to update vibration intensity in kernel settings
3.0.12
Previous beta updates published to all
Bugs corrected
Translations updated
Please add custom USB/DC charging voltages and Sound Volume tweaks.
rgreat said:
Please add custom USB/DC charging voltages and Sound Volume tweaks.
Click to expand...
Click to collapse
Added to To-Do list.
Thank's
Could u list what voltages work best for CPU speeds
Sent from my SGH-T679 using Xparent ICS Tapatalk 2
hatememarkz said:
Could u list what voltages work best for CPU speeds
Sent from my SGH-T679 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
it depends from the device, rom and cpu.
try to low 25 each step and, if working fine down another 25 until you have
freezes or reboots
Here's more info
Sent from my SGH-T679 using Xparent ICS Tapatalk 2
Not working for Xperia S on stock based rom. Says missing files.
Sent from my awesome Xperia S 'Nozomi'
l.Urker said:
Not working for Xperia S on stock based rom. Says missing files.
Sent from my awesome Xperia S 'Nozomi'
Click to expand...
Click to collapse
please
send me a logcat
A nice new tool. If you need a German translator for this APP ...
l.Urker said:
Not working for Xperia S on stock based rom. Says missing files.
Click to expand...
Click to collapse
I would be interested in this tool for Jelly Bean. I tried it and I also get this message.
As for translation, I can take care of french!
parse error.on huawei u8230 cm7.kernell 2.6.32
desalesouche said:
parse error.on huawei u8230 cm7.kernell 2.6.32
Click to expand...
Click to collapse
sorry, v1 is only to ics and higher
i will release v2 in 1-2 days, with android 2.3 support.
stay connected
The Smith said:
I would be interested in this tool for Jelly Bean. I tried it and I also get this message.
As for translation, I can take care of french!
Click to expand...
Click to collapse
no problem.
please, send me a logcat with the app initialization, in order to known the missing filenames
bartito said:
no problem.
please, send me a logcat with the app initialization, in order to known the missing filenames
Click to expand...
Click to collapse
Awesome, will do very soon.
Hello,
Great app, thanks.
Default profile seems not automatically activated on boot.
I need to activate it manually even with check box "enable on boot" checked.
Behavior like "voltage control" app, automatic apply with countdown on notification to abort before apply if needed would be great.
Thanks
User_99 said:
A nice new tool. If you need a German translator for this APP ...
Click to expand...
Click to collapse
Thank's
Finishing a previous work and after that i will contact with you
The Smith said:
I would be interested in this tool for Jelly Bean. I tried it and I also get this message.
As for translation, I can take care of french!
Click to expand...
Click to collapse
Please, download 1.1.0 and try another time.
Post the /sdcard/CpuProfiles/files-initialization.log after error
desalesouche said:
parse error.on huawei u8230 cm7.kernell 2.6.32
Click to expand...
Click to collapse
1.1.0 is compatible with Gingerbread.
Please try it
cook said:
Hello,
Great app, thanks.
Default profile seems not automatically activated on boot.
I need to activate it manually even with check box "enable on boot" checked.
Behavior like "voltage control" app, automatic apply with countdown on notification to abort before apply if needed would be great.
Thanks
Click to expand...
Click to collapse
Solved in 1.1.0.
Please try it
bartito said:
Solved in 1.1.0.
Please try it
Click to expand...
Click to collapse
Default profile still not activated after boot.
Could you add mV on cpu main screen (there is enough space for it and it's convenient to be able to check without the need to expand the box)
Charge page typo. Replace mV by mA.
Hi, ran into missing files error as well. This is the file initialization log file. Am on Slimbean 3.
ls /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels: /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels: No such file or directory
Requested file /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq exists
Requested file /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state exists
Sent from my GT-N7000 using Tapatalk 2
Kersian beat me to it! I also was running Slim Bean 3.0.
I still have something for you. I tried it on Android 4.2 and still get a missing file error. I attached the logcat as requested, and the file output by the app itself tells us about the same missing file mentioned by Kersian.
BTW, in the warning popup at the beginning, if you want to be consistent with similar popups from other apps, we should read "Don't show anymore" and not "Doesn't show anymore".
Keep up the good work and let me know too if you want the french translations!
Performance Control is A CPU Control application bundled with AOKP (created by xoomdev).
I started modding and adding features to this application, with @educk, few months ago and now we decided to create a dedicated thread.
Functions:
Change CPU Governor, I/O Scheduler and Clock Speed
Battery information + Fast Charge setting + Battery Life eXtender setting
Change Voltages Assigned to each CPU frequency
Customize MinFree Task Killer (set the amount of RAM the minfree taskiller will keep), Not Killable Processes feature
Customize SD read-ahead
VM Settings such as: Dirty Ratio, Dirty Backgroud ratio, Dirty expire centisecs, Dirty writeback centrisecs, Minfree kbytes, Overcommit ratio, Swappiness and VFS Cache pressure, Dynamic Fsync, Backlight timeout, Backlight on touchscreen, Phantom Key Presses Filter
Integrated CPU Spy
Linux Kernel informations, CPU Informations, Memory Informations
Disk Informations
Tools: Custom shell command, Wipe cache+dalvik cache, Flash kernel or recovery (img files), Clean residual files, Optimize DBs
... and more
Depending on the kernel used, some application features will not be accessible, like: Voltage settings, Battery Life eXtender, etc
Requirements:
Root
Busybox
CM or other AOSP like ROM based on 4.0+
APP is Licensed under GPL v3.
TIPS:
- You can open system battery informations by clicking on voltage value in Battery tab
- You can increase or decrease voltages by 25mV steps in Voltage Settings tab using menu
- You can change fast between flashing kernel or recovery using menu
- Switch fast between tabs using menu > Tabs
XDA:DevDB Information
PerformanceControl, Tool/Utility for all devices (see above for details)
Contributors
h0rn3t, educk, Rhonin86,Laurentyu1995,LeroViten,Evisceration,Stefano187,cyaniris
Version Information
Status: Stable
Current Stable Version: 2.2.3
Stable Release Date: 2014-05-09
Created 2013-09-14
Last Updated 2014-07-04
Changelog
v2.2.5 [07.09.2014]
added the possibility to reorder tabs (menu > app settings > set tabs visibility - long press to reorder items)
updated spanish translation thanks to @DaniPhii
updated romanian translation
v2.2.4 [26.07.2014]
added backup/restore settings (menu > app settings)
all core status are displayed now on cpu settings tab
fixed issue with kernel/recovery backup custom names
updated russian translation thanks to @LeroViten
v2.2.3 [04.07.2014]
check for su & busybox at startup just once and when the rom is changed
updated russian translation thanks to @LeroViten
added support for GT-I9082 thanks to @TripRex
Old changelog:
v2.2.2 [30.06.2014]
added kernel/recovery backup option
Download: http://forum.xda-developers.com/showpost.php?p=53804588&postcount=675
v2.2.0 [29.06.2014]
enable/disable MSM HOTPLUG - added by @F4k
added Battery Calibration - menu battery tab
fast charge notification is now clearable
v2.1.19 [20.05.2014]
added LiveOC support (not tested) - CPU Advanced TAB
changed boot toasts with notificaton
changed app icon
added option to restore settings from init.d script (some settings may be overwrited by system) - App Settings menu
v2.1.18 [09.05.2014]
fixed UI issue for some devices
fixed min/max freq issue for some devices
added support for S4 mini f4ktion kernel ( thanks to @F4k )
updated german translation thanks to @DF1E
updated russian translation thanks to @LeroViten
v2.1.17 [04.05.2014]
fixed issue with voltage tables in microvolts
v2.1.16 [03.05.2014]
Update Russian Translation thanks to @LeroViten
Updated Spanish translation thanks to @Garcia98
Added Nexus 5 (thanks to @educk) and Xperia U (thanks to @Garcia98) on supported devices list for kernel/recovery flash
Some small improvments and issues fixed
v2.1.15 [26.04.2014]
add support for krait undervolting (CPU Advanced Tab)
add support for Performance Profile
Any change of cpu freq. or governor will update Performance Profile default values (no need to reopen app. )
v2.1.14 [18.04.2014]
added support for voltage table located at: /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
fixed some issues with multicore devices
v2.1.13 [12.04.2014]
fixed sysctl editor issue
rewrite KSM/UKSM for compatibility with UKSM variants
added posibility to override sd path (menu > app settings)
added cpu information (cpu settings > menu)
added memory usage (memory tab > menu)
remove info tab
added some settings in cpu advanced tab
v2.1.10 [07.02.2014]
added IO Settings (menu CPU Tab)
added WIFI PM (Advanced Tab)
added Multicore PowerSaving (CPU Advanced Tab)
fixed zram display bug on multicore
some UI changes
update translations (thanks to @Rhonin86, @Stefano187, @DaniPhii, @LeroViten)
v2.1.9 [24.01.2014]
Added builtin automatic check for updates and posibility for download using Download Manager (menu > app settings)
Zram disk size display in Mb and percents
Started support multicore (new tab available CPU Advanced: mpdecision, intelliplug, ecomode, screen off max frequency, screen off min frequency- more will be added)
Tips: Tap on current frequecy to change cpu. LongTap to force cpu online/offline
Fixed some FC ( many thanks to: @dabl8, @Darian71, @houssam10001 )
v2.1.9 BETA 2 [05.01.2014]
You must uninstall previous version before installing the new one
Fixed compatibility with KK
Added logcat and dmesg dump (Tools Tab)
Added touchscreen control: s2w, h2w, etc (Advanced Tab)
Fixed zram
v2.1.8 [05.11.2013]
Fixed VM Settings & SysCtl Editor bug ( values not saved )
Added ondemandplus governor as settable
Added Spanish translation ( thanks to @DaniPhii )
v2.1.7 [03.11.2013]
Added SysCtl Editor - Tools Tab
Reworked VM Settings based on sysctl - it is necessary to reenter vm values
Added Simplified Chinese translation (thanks to @cyaniris )
Auto reload application after change tab visibility
v2.1.6 [26.10.2013]
Added Vibration Control - Advanced Tab
Added Extended VM Settings - Advanced Tab (remove VM Tab)
Support for Ultra KSM
Show / Hide Tabs feature in Meniu > App Settings
v2.1.5 [20.10.2013]
Added zRAM settings in Memory Tab
- thanks to @educk to achieve the kernel with zram support -
- tested only with zram module builtin kernel -
Added BuildProp Editor in Tools Tab
v2.1.4 [27.09.2013]
Fixed Dynamic Frequency Scaling issue (tested by @etch04)
v2.1.3 [26.09.2013]
added freeze / defrost packages (use menu to change between system and user packages)
added governor settings (not available for all governors)
move VM settings in a new tab
added Dynamic frequency scaling (not tested) http://forum.xda-developers.com/showthread.php?t=2308040
added italian translation thanks to @Stefano187
remove /data/PerformanceControl file
v2.1.2.1 [14.09.2013]
FC fixed when KSM not supported by system
v2.1.2 [13.09.2013]
Added KSM Settings in Memory TAB
Added more devices (for kernel and recovery flash) https://github.com/horn3t/android_packages_apps_PerformanceControl/blob/jb2/res/raw/devices.xml
v2.1.1 [06.09.2013]
Fixed loads of Force Closes on various devices
Added the possibility to individually delete residual files
Updated German Translations (thanks to Rhonin86)
Added Russian Translations (thanks to LeroViten)
v2.1.0 [29.08.2013]
Additional information's on DiskInfo tab (tap on each partition)
Added the ability to flash kernels/recoveries from ZIP too. (It doesn't have to contain META-INF)
Added the list of files from "Clean residual files"
v2.0.9 [24.08.2013]
Fixed Force Closes when setting TaskKiller values
v2.0.8 [22.08.2013]
New DiskInfo TAB - display the total and free space of: /system. /data, /cache, /sdcard, /ext-sd partitions
Added Optimize Databases (SQLite Vacuum) - Tools Tab
Change Fix Permission script for better compatibility with CM-10.2
Added Tab Menu (manage all tabs from one window -> accessible through the Menu key)
Added German and Romanian translations (thanks to Rhonin86 and Laurentyu1995)
Minor Bug Fixes
UI Improvements
v2.0.7 [16.08.2013]
Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
Added "Fix Permission" option (as it is removed from newer CWM recoveries)
Added "Clean Residual Files" option
Minor fixes
I can't find download link ?
Sent from my GT-I9082 using XDA Premium 4 mobile app
keshow said:
I can't find download link ?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
On top of thread you will see a black menu.
I beg you, Sir, make hiding chosen tabs in options, please!
pupakota said:
I beg you, Sir, make hiding chosen tabs in options, please!
Click to expand...
Click to collapse
Today I will release a new version. So, hide tabs option will be included in the next version.
Great news, tell me, is possible to make divided settings for i/o for internal and external storage?
I may sound weird, but are we sure ,that i/o seetings set by perfctrl are really set for everything at once?
And one more idea..more VM switches, like /proc/sys/vm/dirty_bytes , /proc/sys/vm/laptop_mode, /proc/sys/vm/min_free_order_shift , /proc/sys/vm/page-cluster, and so on?
Would it be hard to add such switches?
pupakota said:
Great news, tell me, is possible to make divided settings for i/o for internal and external storage?
I may sound weird, but are we sure ,that i/o seetings set by perfctrl are really set for everything at once?
And one more idea..more VM switches, like /proc/sys/vm/dirty_bytes , /proc/sys/vm/laptop_mode, /proc/sys/vm/min_free_order_shift , /proc/sys/vm/page-cluster, and so on?
Would it be hard to add such switches?
Click to expand...
Click to collapse
You can test with other similar applications and see if are really set.
In the new version you have builprop editor, so you can set other vm parameters.
@h0rn3t this app has all those feature which i need but i cant set the cpu freq. ,, the freq slider set itself to maximum level ,, the minimum and maximum slider set itself to maximum level after exiting the app,,, dont know its a bug or only with me,,, but i can set freq with set cpu properly
Mohanshbhr said:
@h0rn3t this app has all those feature which i need but i cant set the cpu freq. ,, the freq slider set itself to maximum level ,, the minimum and maximum slider set itself to maximum level after exiting the app,,, dont know its a bug or only with me,,, but i can set freq with set cpu properly
Click to expand...
Click to collapse
What rom and kernel do you use?
h0rn3t said:
What rom and kernel do you use?
Click to expand...
Click to collapse
stock samsung tw rom with stock kernel (rooted, unsecured, init.d)... its i can set cpu freq sliders properly with set cpu,,, i was thinking its happening due to conflict with setcpu so i flashed new rom and reinstalled this appwithout any tweaks to test but the result was same,, as soon as i exit app after setting sliders it set itself to maximum level,,, on more thing in time in sate phone goes to deep sleep and freq is also at minimum level most of time,, dont know why only slider goes to maximum level....
Mohanshbhr said:
stock samsung tw rom with stock kernel (rooted, unsecured, init.d)... its i can set cpu freq sliders properly with set cpu,,, i was thinking its happening due to conflict with setcpu so i flashed new rom and reinstalled this appwithout any tweaks to test but the result was same,, as soon as i exit app after setting sliders it set itself to maximum level,,, on more thing in time in sate phone goes to deep sleep and freq is also at minimum level most of time,, dont know why only slider goes to maximum level....
Click to expand...
Click to collapse
Look on OP at Requirements.
Do you have a multicpu device? In this case mpdecision reset the frequencies.
Hi
Can anyone help. I don't see any download link in OP posting.
Thanks
smohanv said:
Hi
Can anyone help. I don't see any download link in OP posting.
Thanks
Click to expand...
Click to collapse
Look at the black menu !!!!
http://forum.xda-developers.com/devdb/project/?id=600#downloads
Superb Work...
Always wanted one..!!!
Hi,
i'm actually testing [ROM][KK][4.4.2][KOT49H] ★★★ BEAN KAT v.5 + [Kernel] CM 11 - 4.4.2 - [ION+PMEM] Khan Kernel v1.1 on my Galaxy Wonder.
I tried to change some settings via performance control 2.18 but some values in build.prop, vm, i/o scheduler are not applied.
I dont know if this issues are rom, kernel or performance control related, but in the signature of some sgs+ developers i saw that they are actually using performance control 2.19b.
Maybe the issues are going to be fixed in the next version.
Cheers
tycoo said:
Hi,
i'm actually testing [ROM][KK][4.4.2][KOT49H] ★★★ BEAN KAT v.5 + [Kernel] CM 11 - 4.4.2 - [ION+PMEM] Khan Kernel v1.1 on my Galaxy Wonder.
I tried to change some settings via performance control 2.18 but some values in build.prop, vm, i/o scheduler are not applied.
I dont know if this issues are rom, kernel or performance control related, but in the signature of some sgs+ developers i saw that they are actually using performance control 2.19b.
Maybe the issues are going to be fixed in the next version.
Cheers
Click to expand...
Click to collapse
Yes, there were some incompatibilities with KK. If you want to test and report, here is a new beta version: View attachment 2493900
You must uninstall previous version before install new one.
h0rn3t said:
Yes, there were some incompatibilities with KK. If you want to test and report, here is a new beta version: View attachment 2493900
You must uninstall previous version before install new one.
Click to expand...
Click to collapse
Thx a lot!
I tested it and want to report that i dont see anymore problems atm.
I successfully changed and applied following settings:
- cpu frequencies, governor, scheduler, set on boot
- Battery Life eXtender value, set on boot
- minfree memory settings, LowMemoryKiller management of not killable processes, ksm - enable/disable on boot, zram - start/stop - change size value - set on boot
- dynamic fscync - enable/disable on boot
- vm settings - changed swappines & vfs_cache_pressure - set on boot
- disk info - sdcard 1 + 2 is shown again
- build.prop - changed ro.config.low_ram from false to true and back
Great work!
Cheers
tycoo said:
Thx a lot!
I tested it and want to report that i dont see anymore problems atm.
I successfully changed and applied following settings:
- cpu frequencies, governor, scheduler, set on boot
- Battery Life eXtender value, set on boot
- minfree memory settings, LowMemoryKiller management of not killable processes, ksm - enable/disable on boot, zram - start/stop - change size value - set on boot
- dynamic fscync - enable/disable on boot
- vm settings - changed swappines & vfs_cache_pressure - set on boot
- disk info - sdcard 1 + 2 is shown again
- build.prop - changed ro.config.low_ram from false to true and back
Great work!
Cheers
Click to expand...
Click to collapse
Thank you for testing & reporting!:good:
2.1.9 Beta 2
Fixed compatibility with KK
Added logcat and dmesg dump (Tools Tab)
Added touchscreen control: s2w, h2w, etc (Advanced Tab) - not tested, need feedback !
Fixed zram
Version: 1.4.7
Model's: D2302/3/5/6 D2403/6
Software: All android version 4.4.4
- The kernel has been updated to 3.4.106
- Added best governors
- Added I / O schedulers
- Added support Faux123 Sound Control 3.6
- Added support Faux123 Kernel Enhancement (not all features)
- Added support for KSM
- Added support for KCAL LCD
- Added advanced control GPU
- Added support inteliplug
- Added support intelitermal_v2
- Added zRam & swap (disabled by default, but you can include any software)
- Added support frandom
- Activate the option AIO
- New Topology CPU msm8226 (frequency shift, on / off kernels, change Governor GPU)
- Technology DFsyns and asynchronous work of memory
- Reduced the minimum value of the charging current and voltage Smart (a little more than use the battery longer charged in the investigation)
- Fixed the problem of the kernel from sony and reduce the number of unnecessary debug'a in logs kernel
- Cut Sony RIC from the nucleus and ramdisk'a
- As an integrated software test Faux'a to configure the kernel
- And much more, which is not remembered
Downloading: https://yadi.sk/d/gYmi3UcFf5pgq
Installing only CWM/TWPR.
github
Info post (only Russian forum) for Faux software link
Changelog FKernel
FKernel 1.4.7
- Moved the project to the new firmware, firmware and B.1.8 below S.1.13 this kernel is not supported
- As an experiment added hardlimit, enabled by default, but works as the drain, adjust yourself to fit your needs.
- A bit optimized logic taskkiller'a
- Updated module swap
- Now works in Touch Boost CPU Hotplug
- Small changes of memory leaks
- Instead of the CWM is now TWPR
FKernel 1.4.1
- Removed the technology hardlimit, sonievskie works better and faster times
- Slightly cleaned up the core
- Fixed memory leak
- Added two types of KSM, inteli KSM recommend using a Governor intellidemand
- Fixed AIO
- Added calibration of the display
- Fixed saving
- Added new TCP modes
- Fixed some problems Wi-Fi
- Fixed known bugs with version 1.2 kernels (ONLY test) and 1.3.h
- Added an artificial delay of the display of 0.7 seconds for the Governor ntellidemand
- Updated LKM and the kernel OOM with 3.18
- Tried many different settings
- Now two versions of the kernel for gearboxes and dvusim smartphones
- Fixed bug control a second SIM card on dvusimochnyh smarts
FKernel 1.3.7
- Fixed some problems with Wi-Fi
- Updated and added Governor
- Added support Faux123 Software
- Fixed some memory leaks
- Improved support for AIO and fixed bugs and memory leaks
- Updated algorithms filesystems (slightly)
- Exhibited limiting parameters for Faux123 not to kill smartphone
- As amended and updated algorithms worker`s for multi-core systems, removing some delays
- Updated driver emmc and sd card (5.0 now as a test)
- Fixed the problem of switching frequency on some Governor
- Fixed problems and memory leaks in the RAM, the more aggressive dumping of blank pages
- And on the little things
FKernel 1.1.2
- Fixed timings smartphone devices
- Fixed problem with plugging / stuttering when listening to music (not used developments and AOSPa SM)
- Updated drivers wi-fi, gpu, Bluetooth.
- Disabled logcat
Hey its great work.. I appreciate it.. Will try it today only..
I have a request.. Can you please make kernel with double tap to wake up support.. I know its typical.. But if you than you will be lord to us..
Btw thanks a lot..
Thanks for the good kernel. Where can you download the app so that you can adjust everything.
Sent from my D2403 using XDA Free mobile app
Matze6989 said:
Thanks for the good kernel. Where can you download the app so that you can adjust everything.
Sent from my D2403 using XDA Free mobile app
Click to expand...
Click to collapse
All by itself is placed after installation.
Okay thank you for the great Job.
Sent from my D2403 using XDA Free mobile app
Confirmed working on d2302
Soon will remove the theme, munching Download.
Why is removed?
Sent from my D2403 using XDA Free mobile app
Will it work with Cyanogenmod 11?
Sent from my D2303 using XDA Free mobile app
works well with d2305, but screen takes ages to turn on and sometimes has massive freeze and i have to force shut down by pinhole.
Governor: yanctive or lionheart
min:300
max:1.19
intellithermal on and set to recommended settings (as stated within the app)
rest is default
Click to expand...
Click to collapse
i'll tried bumping the min up to 787, but battery is a big part for me.
and deep sleep is also quite bad with a over night sleep of 8 hours only 30mins were deep sleep and with 6 hours on 787 and rest full on at 1.19.
currently reverted to default kernel, maybe will try later if boerd.
Very goooooooood !!!!! Work svery well, no problem for the moment
This is the Best Kernel for the Sony xperia m2. :thumbup:
Big Thanks.
Sent from my D2403 using XDA Free mobile app
~Patryk said:
Will it work with Cyanogenmod 11?
Sent from my D2303 using XDA Free mobile app
Click to expand...
Click to collapse
We need to replace the ramdisk from CM11.
Can you do that, please? I have CM11 and battery charging last about 5h ( stock 3h), and drain faster than stock, 7% for night for example (stock 1%).
Sent from my Xperia M2 using XDA Free mobile app
Thanks..
Works great on my d2305..
Please build more kernel or cusrom for d2305 device..
Great!
settings should look like?
My english is bad
@freack_v
Thank you for putting your time in this grate kernel. However I have problems with the fauxclock app. the apply on boot settings don't seem to stick I have tried the fix permissions in the app but has made no difference. I have workaround this by using kernel auditor instead.
I`ve tried this kernel on my D2303, but after flash it started lag. How can I fix this?
System version 18.3.1.C.1.15
SmoothMod Kernel (SMK) for Samsung Galaxy Tab 3 8.0 3G (SM-T311), also may work on WiFi version (SM-T310), all stock and CM ROMs.
Development discontinued, read reason here.
This kernel is developed to give you more smoothness and stability than you can have on stock kernel and others.
Warning. Kernel may work on your device/ROM and may not. For me it works at all ROMs and for many people (on 4PDA.RU forum) it works too. Some people say (or said before kernel worked, this also can be) it doesn't work. So do a kernel backup please before you flash it first time. I've never had boot or usage problems with SMK, but it could be because i'm its developer (though it can not be the reason for that I'm always successfully boot it..). So it seems that our devices of the same model might be different. Be careful as I can not help you.
Features:
- Kernel version updated up to 3.2.26 and keeps updating
- Safe CPU overclock to 1.9 GHz with CPU-Boost kernel driver developed also by myself
- Custom (and only here) governor Smooth that is made to give both good battery saving and absolute smoothness. Uses GPU load and io_wait to additionally increase frequency at the right time.
- Kernel has a custom Android service smkd that controls all its features and provides many tweakable settings that you can change very simply: through terminal command "smkd" (instructions below) or "by hands" at folder "/smk" (like usual linux kernel settings at "/proc/sys/{kernel|vm|net}"). The program is written in C language, not as a script, for performance (shell-scripts are very slow when comparing with optimized C-programs).
- Tweak Menu that can be found if you type 'smkd' in your terminal.
- SmoothnessControl - one of smkd's functions that tries to guarantee UI smoothness to your tablet even if there are very CPU-hungry (but not I/O) apps/programs running like android.process.media and others. By default disabled. To enable, type this: 'su -c "scd --enable"' in terminal emulator. To disable, type 'scd --disable'.
- CPU Undervolt controlled through smkd.
- DynBS program (also developed by me) used by smkd to improve battery saving by 40% and more.
- Boeffla Sound Engine with custom settings, not working with Boeffla Sound Control app because smkd controls them (it's needed because smkd fixes engine's sound effects bug). Settings are stored folder "/smk" in files beginning with "boeffla.".
- Cron scheduler configured from file /sdcard/cron/root.
- All the custom tweakable settings described upper are reloading instantly after you change them or on delete (cron schedule file is also under the same watch).
- Kernel is compiled with optimized HYPER-TOOLCHAIN with gcc version 6.0 and maximally optimized compiler configuration.
Customizing kernel:
There is now nothing that needs to be explained, as customizing is pretty simple! Just type command 'smkd' (without quotes) and go through the menu (by entering appropriate symbols) as you want, changing parameters as you need.
Ask, if you have questions
If you have questions or suggestions about my kernel, feel free to write about that here and I will try to answer.
F.A.Q.:
Q.: Do I need to wipe Dalvik/ART cache before/after flashing this kernel?
A.: It is even not useful to wipe caches because they are used by Android only, not by kernel. So, it's not needed.
Q.: The kernel does not boot! What do I have to do to boot it?
A.: Write a message in this thread providing info about what ROM do you use, what Android version it is and what kernel build (kk/lp/mm) and version you are trying to boot. I will reply to that message and try to fix that problem.
Author: me, igoryan94
Download from Google Drive
Before flashing this kernel please do a backup yours first!
Warning! If you have a Jellybean/Kitkat rom, then download the smoothmod-kernel-kk-... build. If you use Lollipop (CM12), then your build to download will be ...-lp.... If it is a Marshmallow (CM13), then download mm build.
Other choice will cause your device to not be able to boot!
(Sorry for my (maybe )bad english)
Plans:
-
Developing now:
-
Changelogs (old*):
1.2.1/1.2.2:
- Returned possibility to load a profile from command line (command 'smkd --load [name]' or 'smkd ld [name]')
- Added custom setting for apps CPU time, now it has two groups: idle and high.
Idle group gives an app very small amount of CPU time, use for hungry apps that you don't need.
High group grants an app a 95% of all CPU time. Use to speed up some apps or games.
It is all very similar to Greenify and others, excepting that this is not battery saving solution, only to smooth up your Android, as Greenify disables an app and CGroup lowers app's CPU execution time available to it.
- I/O settings fully rebalanced for smoothness for system processes and apps processes
- Also added control group for I/O that does like one for CPU, but for I/O and developed its correct (for Android) behavior.
- Current configuration name in smkd menu now correctly saves and loads after reboot.
- Default LMK level changed to 125
XDA->SMK:
1.2:
- Got a smoother UI with better CGroup tweaking
- In case of some situations smkd will notify user with drawing a small square of some color at the left upper screen edge (portrait orientation). For overheat the color is red. When SmoothnessControl gets to work, color is light blue/cyan. If device's load is too high, the color will be blue.
"Notification" will blink when screen updates because the framebuffer devices are not support this method of screen drawing. But it works for now and I think that it is very useful to know the reasons of device's lags and freezes.
- Menu now immediately reacts to input, instead of pressing some characters and then Enter. Modified all menus that way so the interface is now much better.
- When exiting menu, parameters are automatically saved to default profile. No need to care about it anymore...
- Added Quick settings also to RAM and I/O
- Main menu: moved all "p)" menu elements to main menu level, it is quicker to access now
- Some more Quick settings options added
- Added Quick settings to my menu templates, so I will add this to most of the new menus in the future
- Main Quick settings colors changed to blue, additional are still white
- Overclock to 1920 MHz lowered to 1800 MHz because 1800 is much more stable (1920 causes reboots on Marshmallow on my tablet)
- Device now reboots when charging speed is too bad. By default this is disabled. Also added setting "Charge cycle time" and Quick settings for that so you can quickly set up to what charge speed you need (reboots are helpful but not very good for users that want to play device when it charges).
- 'Boost' feature disabled so now DynBS will work as always even when device is laggy
Previous:
1.1.22:
- CPU, Boeffla Sound and Network setting menus in smkd now have the Quick settings feature that helps to configure them by one click instead of tweaking them each
1.1.21.1:
- DynBS updated: now it uses frequencies from 350 to 700 MHz too, so more battery can be saved.
1.1.21:
- smkd now has menu interface which opens by default by command 'smkd' without options.
- All setting commands are removed. Use menu instead.
- In Cyanogenmod ROMs SystemUI is restarted every time when screen becomes disabled, so you may never see it lags or freezes again.
- PCS renamed to SC (SmoothnessControl).
- Overclock enables when device is laggy even when it is disabled in settings
- Redone temperature control: now smkd monitors a device temperature instead of CPU. It leads to better smoothness. Also overheat situations disable some functions like I/O readahead, ZRam, KSM.
- Overheat prevention function fully removed
- Governor Smooth now enables both cores on gestures with two or more fingers instead of simple tap.
1.1.20:
- Added charging compensation: now when battery charging is too slow, CPU Topology and voltage will be changed appropriately for quicker charge.
- Touch boost changed from 1400 to 1000 MHz, but it also boosts busfreq to 400 instead of 267 MHz. Results in better reaction on screen touch.
- Governor Smooth's default sampling_rate changed from 27000 to 16000 for quicker reaction
1.1.19:
- Added ARM CPU Topology for better multithread scheduling
- Some CPU Scheduler changes for smoothness or power saving (tweakable)
- Improved smkd UI code
1.1.18.1:
- Fixed performance/smoothness problems.
1.1.18:
- Added new default configuration "throughput"
- GPU acceleration is now forced for all apps and it is changeable from smkd.
- I/O scheduler SIOPlus added.
- DynBS is returned (one user asked for it as it really saves battery, as he said).
1.1.17:
- User profiles are no more exist, replaced with default configurations" instead. They are: smooth, battery, ram and cool. After each launch of smkd (mostly on reboot) configurations are removed and recreated to always be fresh and up to date.
- Added ability to create, rename and delete profiles by normal way, but default profiles cannot be replaced, deleted or renamed through smkd (only "by hands").
- GPU settings: composition and forced GPU-acceleration from Android settings for developers.
- Tripndroid and Zen I/O schedulers are added.
1.1.16.1:
- Configurations loading is now be always successful (but only if appropriate file exists), without that annoying errors "try again later, please..."
- Small tweaks optimization
1.1.16:
- Overclock now disabled by default, as it was on 1.1.14 and before, for battery saving (overclock eats too much battery). Can be enabled with command 'smkd -c -o 1'. Temperature control is now optimized for both CPU overclock and hardware maximal frequency modes.
- smkd interface improved a little.
- KSM functionality added with some fixes for Mali GPU driver bugs in userspace.
- Default temperature limit is now 64 C (before it was 67 C). This is done for more stability when the weather is hot.
- Some changes for smoothness and stability...
1.1.15:
- Overclock is enabled now for any time when screen is enabled (no more boost).
- Developed overheat preventing functions that cool device when temperature is between 90% of threshold and higher. CPU frequency will be set according to temperature for the moment (for every 2% will be a different frequency). Function can be disabled but it is not recommended.
- All cooling functions now control voltage too to be more effective.
- Governor Smooth tweaked for more balance (oc_nr_run_threshold->6)
- Governor Smooth: changed logic: half-overclock (to 1.7 GHz) will occur if number of processes running is a half of oc_nr_run_threshold tunable.
- smkd now controls I/O scheduler and I/O readahead settings, they are tweakable with smkd command. Profiles change this parameters too.
1.1.14:
- smkd tweaker program fully translated to english and comes now in two languages. Now it uses Android's property 'persist.sys.language'.
If your device configured for any language excepting russian, then program will be in english for you. At the other case it will print out text and messages in russian.
- Improved custom configurations in smkd. Now it loads profiles synchronous with service (by using mutex) instead of relaunching it with shell stop/start (it was too slow and even buggy to do that).
- DynBS will not be in kernel anymore, it is not so effective as needed. Instead, I've added a profile tweaks for my governor Smooth, that tweaks easily changeable from smkd (cmd. "smkd -c -s [0-2]").
1.1.13:
- Cron scheduler now works correctly (i'm happy ), doing exactly what was scheduled by the user at the exact times.
- I don't remember what was in this version because forgot this as I worked on 1.1.14 intensively.
-----
* Newer versions contain changelogs in install archive itself.
Very good kernel. Use [5.1.1] Resurrection Remix 5.5.9 + SMK 1.0.20.1 lp.
Nerovinger said:
Very good kernel.
Click to expand...
Click to collapse
Thanks
stuck at bootanimation..
Sent from my SM-T311 using XDA-Developers mobile app
so.hell said:
stuck at bootanimation..
Sent from my SM-T311 using XDA-Developers mobile app
Click to expand...
Click to collapse
What ROM do you use? Android version, SMK version?
AICP BY GR8NOLE.
SMK V-1.1.12
i try dirty flash n clean flash.stuck at bootamination..
Sent from my SM-T311 using XDA-Developers mobile app
so.hell said:
AICP BY GR8NOLE.
SMK V-1.1.12
i try dirty flash n clean flash.stuck at bootamination..
Sent from my SM-T311 using XDA-Developers mobile app
Click to expand...
Click to collapse
Looks like it will not work on AICP ROM, on Cyanogenmod 13 and ResurrectionRemix kernel works fine (I've tested that)... Sorry The reason for that I can not fix this problem is that I do not know (even cannot know) how to make an init.rc (this file starts all Android services on boot) file universal (to support absolutely all ROMs at one time). This is also the reason for three builds of kernel: kk, lp and mm...
Nice kernel. But can you please make a version of your kernel work with the T310 (WiFi)?
Stuck at Bootanimation
ROM: Resurrection Remix 5.6.9 by powermetza
Android Version:6.0.1
SMK version 1.1.12
pawas99 said:
Stuck at Bootanimation
ROM: Resurrection Remix 5.6.9 by powermetza
Android Version:6.0.1
SMK version 1.1.12
Click to expand...
Click to collapse
Try to flash on a clean ROM (with backup of cource)... All fine for me on RR.
Luis_0 said:
Nice kernel. But can you please make a version of your kernel work with the T310 (WiFi)?
Click to expand...
Click to collapse
I can't as i don't know much about modding in '/init.rc' script and also about what differences it has in kernels for T310, T311 and T315... Sorry.
There are too much incompatibilities with builds that are now (they must work everywhere but they don't)...
Ok. Added one question to poll. There are three variants for ROM and two for working or not (six at all), for me all works fine, so I voted for the first three answers.
Version 1.1.14 developer testing ends now, smkd fully translated to english. I will now build the kernel and then begin uploading it to Google Drive.
(sorry for my incorrect english)
igoryan94 said:
Try to flash on a clean ROM (with backup of cource)... All fine for me on RR.
Click to expand...
Click to collapse
Stuck at bootanimation even after flashing on a clean ROM.
waiting for update..
Hey @igoryan94,
Thanks a lot for making this great kernel!
I've flashed the KK version along with the stock ROM http://forum.xda-developers.com/showthread.php?t=2789510. It works very nicely. Would you please show an instruction (or a specific terminal command for newbies like me) of how to overclock CPU to 1.9GHz? Currently the max speed is 1.5Ghz according to kernel audit.
Thanks again
Hey I cant change the cpu frequent through kernel adiutor. As soon as i change the freq to 1920 it changes back to 1500.
igoryan94 said:
I can't as i don't know much about modding in '/init.rc' script and also about what differences it has in kernels for T310, T311 and T315... Sorry.
Click to expand...
Click to collapse
@gr8nole could help him in this?
xdaSEx10 said:
Hey @igoryan94,
Thanks a lot for making this great kernel!
I've flashed the KK version along with the stock ROM http://forum.xda-developers.com/showthread.php?t=2789510. It works very nicely. Would you please show an instruction (or a specific terminal command for newbies like me) of how to overclock CPU to 1.9GHz? Currently the max speed is 1.5Ghz according to kernel audit.
Thanks again
Click to expand...
Click to collapse
CPU frequency is automatically changed to 1920 MHz when special conditions are met (they are: "blocked" processes and waiting for I/O).. Version 1.1.5 will have full 1920 MHz CPU frequency.
I will now upload "developer" version of kernel 1.1.15_dev for KitKat users. If you want, test that) It is not fully contains all changes that i've done, but I'm not at home now and cannot compile new build... For now it has smooth overheat prevention and overclock fully enabled.
Hunter97 said:
Hey I cant change the cpu frequent through kernel adiutor. As soon as i change the freq to 1920 it changes back to 1500.
Click to expand...
Click to collapse
Please wait for SMK version 1.1.15, it will use 1920 MHz as a default frequency always excepting overheat moments (that will disapear very quickly) and governor's battery saver mode.
You can also use a developer version 1.1.15_dev if you use JellyBean/KitKat as your ROM.
Ok, "dev" version released for testing.
When I will return home, I will release another testing version that has an I/O scheduler change functionality, optional Overheat Prevention and changing min_freq to minimal (50 MHz) when temperature event occurs. Maybe it will have even more features (I have smkd code with me, PC is only needed for compiling kernel and ramdisk).
on NoleKat.T310. v1.1 KK 4.4.2 not boot. on CM13 it's ok, but, for me, the best android versioni for this tablet is kk stock and i install NoleKat.T310. v1.1.
jamax80 said:
on NoleKat.T310. v1.1 KK 4.4.2 not boot. on CM13 it's ok, but, for me, the best android versioni for this tablet is kk stock and i install NoleKat.T310. v1.1.
Click to expand...
Click to collapse
SMK will not boot on T310. Only T311.