Related
Thanks to richardtrip, pete, Kali, Manup456's, persiansown, jimbob343, pershoot, droidbasement
- Froyo A2SD use SpareParts to change where to store apps (internal or external)
- For old A2SD create a ext3-4 partitions and that's all, no need to change in Sapreparts, all apps are installed on ext partitions
- Thanks to #Teamdesire
IF YOU HAVE PROBLEMS WITH THE ROM, WIPE DATA + CACHE and try again BEFORE REPORTING BUGS!!!!
Now available through Rom Manager
HAVS what is it :
The purpose of HAVS is to minimize the power used by the CPU by determining and setting the optimal voltage. At the same time, the maximum voltage by which HAVS can scale to is fixed to a specified voltage depending on the CPU frequency in order to prevent scaling to a higher voltage than what is normally used at a specified voltage. The optimal voltage is actively determined for each frequency and temperature. HAVS actively adjusts the CPU voltage as the CPU frequency and temperature changes.
Interactive governor what is it :
This governor is designed for latency sensitive workloads, UI interaction for
example.
Advantages:
+ significantly more responsive to ramp cpu up when required (UI interaction)
+ more consistent ramping, existing governors do their cpu load sampling in a workqueue context, the 'interactive' governor does this in a timer context, which gives more consistent cpu load sampling.
+ higher priority for cpu frequency increase, rt_workqueue is used for scaling up, giving the remaining tasks the cpu performance benefit, unlike existing governors which schedule rampup work to occur after your performance starved tasks have completed.
Existing governors sample cpu load at a particular rate, typically every X ms. Which can lead to under powering UI threads when the user has interacted with an idle system until the next sample period happns.
The 'interactive' governor has a different approach. Instead of sampling the cpu at a specified rate, the governor will scale the cpu frequency up when coming out of idle. When the cpu comes out of idle, a timer is configured to fire within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer fires then we assume the cpu is underpowered and ramp to MAX speed.
If the cpu was not 100% busy, then the governor evaluates the cpu load over the last 'min_sample_rate' (default 50000 uS) to determine the cpu speed to ramp down
to.
SetR0M Tools and goodies :
- Some nice wallpaper to your Froyo NexTheme here
- Revert to default fonts : SetR0M-AndroFonts
- Revert to default keylayout for wake up phone here
Things you have in 4.5 :
New Radio needed if you come from older version as SetR0M 3.6 (32.41.00.32U_5.08.00.04)
[FULL] SetR0M 4.5 stock kernel 998Mhz Max with interactive governor
[KERNEL] SetR0M 4.5 UVOC kernel 1113Mhz Max with interactive governor
- No wipe required
- HAVS kernel with interactive governor need more testing so coming soon
- Quadrant score 1677 w/UVOC 1113Mhz Kernel and interactive governor (screenshot added)
- Freshly compiled Kali kernel msm
- Added new interactive governor in stock (change governor as "scaling interactive" in setcpu)
- Fixed Led
- Fixed battery drain
- Updated Titanium backup, Fancy Widget, Rom Manager
- Fixed echo
Changelog SetR0M 4.0 :
- Freshly compiled Kali msm kernel and compiled with full optimization
- Updated Romamanager, Titanium Backup
- Fixed default brightness value (thanks to Defrost)
- Updated ADW Launcher and themed
- Fixed some optimizations
- Added new HAVS Kernel not as default download separately and flash like an update.zip
- Optimized theme and fixed some png
- UVOC kernel coming soon
Changelog SetR0M 3.6 :
- Freshly compiled Kali msm kernel
- Really fixed echo
- Fixed GSensor
Changelog 3.5
- Updated kernel last commit Kali (freshly compiled)
- Only stock kernel 998Mhz, OC-UVOC-HAVS coming soon
- echo fixed (thanks to Richardtrip)
- H264 Camcorder
- Updated mediaprofile 480p
Changelog in SetR0M 3.3 :
- Fixed Calendar widget
- Fixed Voice search
- Fixed Download notification bar
- Replaced default MusiGoogle with Music Mod (by Eliot Stocker)
Changelog 3.2
- Removed SetCPU (coolbho3000, author request)
- Updated Titanium Backup, ADW Launcher (themed), Rom Manager
- Fixed third party apps update
- Optimized and zipaligned
- Updated media profile HQ Camcorder (thanks to Defrost)
Changelog 3.1
- Fixed Youtube (Big thanks to Defrost)
- Complete redesign of the rom with last commit from Manup456's (NexTheme), a lot of news
- Added Setcpu and setcpu.txt in sdcard (use only if OC Kernel)
- Optimized internal Android Task Killer, no need apps for that now
- Kali 2.6.32.9 qdsp - Kernel freshly compiled today / LED FIXED thanks to IEF
- Portable hotspot (wifi tether)
- Fixed Openvpn
- ADW Launcher is default now, and themed
- Zipalign a each boot
- Phone.apk from Defrost Rom fix echo
- Camcorder fixed
- High res 800x480 camcorder
- Optimized and zipaligned
- fixed some permission
- optimized process implemented
- zipalign on boot possible with SetR0M tools
- Added Openvpn
- Added Fancy Widget, Rom Manager
- LiveWallpaper from Samsung I9000
- All media from Samsung I9000
- Custom Bootanimation (thanks Potter97)
- Themed all the rom
- Removed Twitter and Facebook (install from market)
- Added SpareParts and themed
- Added Titanium Backup
- Froyo A2SD use SpareParts to change where to store apps
- Superuser, busybox .....
Donator Thanks :
Choong Yoke Choy
stingerpl
Café King
Sophocleous
Ekowanz
Igor Grlica
skynapster
Lorenzo
Kolemar
Paprikapulver
Heinemann
Lee King Chi Kings
I you like my work buy me a
Nice! I'll give this a go once it's uploaded. What differences are there now it's de-odexed?
socktug said:
Nice! I'll give this a go once it's uploaded. What differences are there now it's de-odexed?
Click to expand...
Click to collapse
More free space, and now you can theming the framework
JupiterDroid said:
If we are coming from a defrost 0.7d rom, do we have to wipe? or can we just flash?
JD
Click to expand...
Click to collapse
Full wipe is required
Can I apply a Nexus One Cyanogen or Froyo theme to this?
Jeppfi said:
Can I apply a Nexus One Cyanogen or Froyo theme to this?
Click to expand...
Click to collapse
The theme are rom specific you can't
Downloaded, installed and booted. A promising start
Loving the fact the battery icon has the percentage in it...Although the percentage is very small!
Under the call settings menu, what is TTY mode? I don't think I've seen that before.
socktug said:
Under the call settings menu, what is TTY mode? I don't think I've seen that before.
Click to expand...
Click to collapse
text mode for deaf
do you have the battery drain display issue with this rom?
JD
JupiterDroid said:
do you have the battery drain display issue with this rom?
JD
Click to expand...
Click to collapse
I use only for 5-6 hours now but no battery drain, kernel is DeFrost 0.7d and battery drain is kernel specific i think
I think the battery icon in the notification bar is faulty. It hasn't moved from 80%. My battery is currently at 78% in settings.
Re: [ROM-FroYo]SetR0M RC1 Deodexed Froyo !!!
I think the battery icon in the notification bar is faulty. It hasn't moved from 80%. My battery is currently at 78% in settings.
Click to expand...
Click to collapse
Only 10 by 10
-------------------------------------
Sent via the XDA Tapatalk App
will you do me a favour and check your battery usage and tell me your stats please mate
JD
Yip, display is showing 62% after 20 minutes of uptime. So I'd say that bug is still to be sorted!
I'm getting linpack scores of 41.01 and It's not overclocked, so that's good!
is it the display bug, is your display high?
Also did you full wipe before you came to this rom? i did a logcat of the system on 0.7d and there was many errors generated, i think this is whats causing the problem, but getting a answer out of richard is like waiting for a solar eclipse
JD
JupiterDroid said:
is it the display bug, is your display high?
Also did you full wipe before you came to this rom? i did a logcat of the system on 0.7d and there was many errors generated, i think this is whats causing the problem, but getting a answer out of richard is like waiting for a solar eclipse
JD
Click to expand...
Click to collapse
I wiped using the new recovery in the rom manager. My brightness is set to auto, which is fairly low, and granted the display has been on a fair bit as I set it all up again!
I suppose a few hours will tell more. Considering this is based on richard's kernel I imagine the bugs will be here too. I have to say though that this one is a fast wee rom!
The display issue has nothing to do with excessive power drain, it's just the status software reporting an incorrect value for display.
So please, leave it be, and concentrate working on i.e video recording (720p any1? Wanna leave the iPhåne 4 in the dust! )
All respect goes to trip for his hard work, I prefer him working on the DeFroST rather than discussing all kinds of crap, wheter the cat should be neutered, or whatever
Troels
Denmark
puttitat said:
The display issue has nothing to do with excessive power drain, it's just the status software reporting an incorrect value for display..............
Troels
Denmark
Click to expand...
Click to collapse
Do you have a source for this?
socktug said:
Do you have a source for this?
Click to expand...
Click to collapse
I'am a (little) source. Before the desire i've had a milestone (stock android, no special interface like sense or something else). I've had the same batterypower like the desire but there were always display around 60 or 70% battery usage. so it seems that this is a wrong (or maybe right?) fact of the stock android.
you have to excuse my bad english^^...but i can the german language much better
I introduce Gamerzrom v10 xxJW4 Rom For Galaxy S Series. I Ported this thanks to burakgon! Give him credit as i have enjoyed it. The Link for the infuse download is at the bottom of the post
Let Me Put Some Known Bugs Out there
1.The Common First Call after flash audio bug- just Turn Speakerphone on and off
2.The Phone Setup wizard bug, Just unzip and replace it with the infuses Phone Setup Wizard.apk file but take the .odex file out at the same time!!
burakgon & ChunLi
GAMING PERFORMANCE PREVIEW
This rom is not for only gaming. You will be amazed by battery life and stability. This rom contains all features of a stock rom and millions more features. Just memory hungry things replaced or deleted with better ones. And optimized for better performance. This just made playing games better.
DOWNLOAD & HOW-TO AND MORE INFO + UPDATES ON BLOG. GALAXY S Edition
http://technorumor.blogspot.com/
Changelog
Code:
v8.01
-Statusbar fix. (If you have statusbar, no need to update v8.0 to v8.01.)
v8.026-03-2012
-RTL fixed (Thanks to Nazari)
- Front Cam fixed (Thanks to stratosk!)
- Photo capture during video fixed (stratosk again)
- Droidwall issue fixed.
- ICS theme, Voice Search, Google Play, Quick Office updated.
- Statusbar disappear fixed. (If you statusbar disapper, reboot or reflash withour wipe)
- Kernel is bigmem with 350mb.
- New CFS settings again again again. (This time really better 3D performance.)
v7.0 17-03-2012
-New 250mhz GPU drivers. (%25+ gaming performance increase) (Safe)
-New status bar icons mostly from froyo.
-Scrolling tweaks - see the browser and app drawer. It’s so smooth compared to old versions.
-Updated built-in apps:
*Google Play Store
*Es File Explorer
*ICS Theme
*Adobe Flash Player
*Download All Files
-Voodoo app deleted. Download from market if you want to use.
-Xbinary updates.
-New CPU voltage table for stabilization and battery life.
-Deeply* optimized system apps.
-Various visual enhancements.
-Fixed ES File Explorer root permissions.
v6.506-03-2012
-Thunderbolt script updated.
-Libs addon updated.
-Bin addon updated.
-3D Graphics mod updated.
-Supercharger updated.
V6.3 11-02-2012
-Thunderbolt! Scripts updated to 2.5.0.
-Undervolt settings changed for better stability.
V6.2 06-02-2012
-Thunderbolt! Scripts updated.
-CFS Settings changed for better 3D performance.
-Various framework cleanup.
V6.0 30-01-2012
-Phone FC Fixed
-Reverted JVT modem. JVU modem is really buggy!!!!
-Wifi fix
-Framework Cleanup
-PicoTTS / SVOX (Text to speech) (Added - Fixed)
V5.0 29-01-2012
-GamerzRom Manager
-GamingMode Script update (STABLE)
-Custom AppFreezer (Freeze apps which you want for gaming mode)
-Patched for BLN
-Sms hack (No MMS convert after 3 SMS)
-SNS is deleted again
-ICS ADW theme is updated. -Dock is much better
-Deoxt-Wrapper added for better moding.
-FM Radio hack. (Works without headphones, %15 battery)
V4.0 25-01-2012
-Gaming Mode is updated (Still needs imporivement) (Swipe down on homescreen to use it.)
(This will freeze most of your + system apps, disable it after playing games)
-Google Talk + Video, Network Location, User Dictionary, SNS Accounts, Angry GPS, Preconfig, Gallery 3D, TTS, Voice Search, Screen Capture | Added to ROM and added to gaming mode to disable.
-Updated Thunderbolt! Scripts 2.4! Thanks to pikachu01
-Quickpic and screenshot it deleted from ROM. (Added stock gallery and screenshot. Back button + Middle button = Screenshot)
-ADW ICS Theme updated.
-Updated to JVU modem.
-SVOX added for request.
-USB Mode is Mass Storage as default now.
-Added some permission lines to updater script and GamerzRom script for better stability.
-GPS configuration is setted for Europa.
V3.01 23-01-2012
-Gaming Mode (Swipe down on homescreen to use it.)
(Your backgorund apps will force close when you enable gaming mode. It's normal)
-GPU Drivers from JS8
-Updated Thunderbolt! Scripts.
-Updated CFS settings from latest thunderbolt scripts.
-Touchscreen tweaks edited. Now it's accurate during charging.
-VPN Connections fixed.
-New default ADW settings.
-Edited 1200mhz undervolt settings. (+25mv for better stability.)
-Added some permission lines to updater script for better stability.
-Various visual changes (green to blue)
-New lockscreen wallpaper.
V2.519-01-2012
-Stabilized CSC and added Sim Toolkit app. Now your APN's will be setted automatically with no problem. (For who has data issues)
-Changed system sounds with not annoying ones. (Battery full, Charger connected, Low battery)
-Wifi scan interval is 150 second now. I tried 3 seconds and it's not faster to connect. It already scanning when you enable wifi first time. Looks like decreased CPU overhead because of wifi scans and imporives speed and battery life during wifi on.
-Reverted to JVT modem. JVU modem has terrible bugs.
-Semaphore app deleted really this time. (Playing with it corrupts the scripts, LMK settings and decreasing performance. I added important and best scripts for performance and everything. You musn't play with it!!!!)
-Googleservicesframework.apk is replaced from 2.3.7 one. (More ram friendly google services)
-Fonts are ROBOTO by default.
-Changed dbdata of adw launcher settings. Disabled ICS icon theme. Already our icons are ICS. No need for third party. (+3 mb ram)
V2.218-01-2012
-Icons are replaced with ICS ones as native. NOT ADW THEME. Now launcher works with 8.1 mb ram with my settings. (+4 mb ram)
-Added huge APN list.
-Added widget picker.
-Modded adw appdrawer icon - ics like.
-Updated superuser to 3.0.7.
-Added wipe dalvik cache script to updater script.
-Possible youtube FC's fixed.
-Added roms wallpapers to sdcard.
-Non-increasing ring mode added.
-Deleted semaphore app and added important scripts like netfilter to init.d.
-Deleted 2 non-script files from init.d.
V2.016-01-2012
-Semaphore kernel 2.5.0 bigmem + stock colors. (If you need voodoo colors, just flash voodoo color version of semaphore. No problems)
-353 mb ram due bigmem kernel (no 720p recording) (if you need it flash normal version of semaphore kernel but ram is 337 mb) (210-220 mb free on startup when clear ram with task manager)
-Builded freshly from "0". So there is no junk remains from midnight kernel and more clear.
-Optimized all framework and apk's for better ram and speed.
-Lockscreen is more responsive due kernel change.
-New thunderbolt scripts added.
-Some stability tweaks on gamerzscript.
-Optimize libsqlite script added to init.d. You apps are faster now.
-Added graphics add-on script. Possible increasing graphical performance.
-Dyed phone call -answer slider's answer icon to blue.
-Keyboard moved to system.
-Changed lockscreen notification circle with cool blue circle.
-Radio controls on statusbar is dyed ics blue like music.
-Phone call's background dyed to dark blue and status bar phone background dyed to ics blue.
-Some graphical imporivements on twframework.
-Added some chmod lines to updater script for better stability for who flashing from another rom.
-EXT4 is optional now. But not recommend.
V1.5.515-01-2012
-Added 53gamerzrom script to init.d. Now we have our own tweaks for better bug fixing and tweaking control. (This including rom releated needings.)
-Added chmod 777 line to 53GamerzScript for fix laucher and keyboard reverting. (This time %100 fixed) (Discovered with my girlfriend (Chun Li))
-Battery icon is orginal ics with percentage now. ( for the request and poll results on xda thread)
-Some cleanup on /system for increasing performance.
-Added disable bootloop detection line to 53GamerzRom script. You can use semaphore with full performance of gaming rom by now. (I'm waiting for latest bigmem to transfer semaphore.)
-Touchscreen sensivity is increased and imporived. Script merged with 53GamerzRom.
-Lockscreen notification dyed from red to ics blue.
-Browser pressed link squares dyed from orange to blue.
-ICS like thumb scrolling bars.
-Init.d is cleared for faster boot.
-USB connection images replaced with cool ones.
V1.414.01-2012
-Dbdata permissions setted to 777 (This will fix the "Launcher and keyborad settings reseting after restart" problem).
-Dyed stock music player's status bar music control colors to purple to ics blue. (That looks sweet!)
-Added hacked camera app (low battery + power button)
-CRT-ON animation added.
-Lockscreen will be more responsive.
-Optimized framework a bit more for better performance.
V1.3113-01-2012
-No wipe
-Updated new google search
-Dyed orange color to ics blue when touching a search result or box on widget on new google search.
-Fixed ICS keyboard: settings reverting after reboot.
Click to expand...
Click to collapse
Thanks for the port I'll check it out.
Infuse roms, built by the xda COMMUNITY!
Nice job, GoSooner. Get your Dev hat on.
thanks i'll flash this. i'm just done with other rom
Deodex version unavailable due to dev request
Sorry i tried to do a deodexed version so its easier on the eyes
GoSooners345 said:
Sorry i tried to do a deodexed version so its easier on the eyes
Click to expand...
Click to collapse
are you going to do one? should i wait for it?
developer said he wont accept deodexed version since its his creation
Nice job...
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-4
Thank you guys for supporting my Works!
Anyone test the battery on this rom?
Sent from my SAMSUNG-SGH-I997 using XDA
phonesetupwizard has stopped, can't get thru setup
i reflashed no use , i have no luck with this rom
using qkster's flash zip
nman123 said:
Anyone test the battery on this rom?
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Might you flash it and test yourself... diff users...diff results for battery...
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-4
nman123 said:
Anyone test the battery on this rom?
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
It was just put up at 9:27 lol
Sent from my SAMSUNG-SGH-I997 using xda premium
First call issue??? due to our ports come from hellraiser... did you discover a new way to port... someone confirm the first call issue present on all ports please...thanks.
is it just me.
redownload , reflashed, rewiped everything. and still SetupPhoneWizard FC on boot. can't get into the phone. just letting you know
I gave the "first" thanks
---------- Post added at 12:09 AM ---------- Previous post was at 12:06 AM ----------
@OP: Is there an option to enable AM/PM in clock? From the screenshots it doesn't seem to show.
Look in the setting s like normal
My Revolutionary infuse sent this! Viciously tasty
I could be wrong,but I think the only way to fix the battery full notification is to deodex and then odex again. . I had this ported I just never posted it.
I tried getting permission to deodex it and he said no
My Revolutionary infuse sent this! Viciously tasty
Pretty decent, I'll have to give this a flash
Hi,
A new voltage control and CPU adjuster app is in the city...
For root users, this app allows to create and automatize CPU and GPU via a profiles manager.
For non root users, you're able to get information about the CPU (governor, speeds, etc).
You can define profiles that contains:
- CPU governor
- Max CPU Frequency
- Min CPU Frequency
- Enable/Disable cores in dual/quad cores (if kernel supports)
- CPU voltages for all frequencies (if kernel supports)
- I/O Scheduler
- GPU frequencies, voltages, stay on and thresholds (if kernel supports)
- Charger voltages (if kernel supported)
- Governor parameter tweaks
You can define profiles that are automatically activated on these conditions:
- Battery low
- Temperature higher
- Screen on/off
- Charging
- Connected to PC
- Voice call started
- Active application
Also, you can view CPU information, like times in state, governor max/min speed and much more.
XDA title page (Dec, 2 2012): http://www.xda-developers.com/android/manage-your-cpu-with-cpu-adjuster/
Used permissions
- Write external storage: To backup profiles
- Receive boot completed: To automatically start service on boot (enable in settings)
- Read phone state: To automatically detect voice call start/stop
- Get tasks: To get active task (in order to correctly apply profiles that depends on the active task)
- Internet: Added small ads (via google ads)
- Billing: For donation control (you can purcharse PRO version inside the app)
- Battery stats: Needed to show the screen on time and battery up time
If you've troubles or issues, please, send a logcat.
Free version includes Ads, is limited to 3 profiles and isn't capable to make backup of your settings.
You can buy the full version inside the app in order to remove Ads and get full app capabilities.
Please, is the app doesn't works (partially or totally) send a message to [email protected] or post in this thread.
Play Store Link
https://play.google.com/store/apps/details?id=com.ryosoftware.cputweaks
Translation interface
You can add language translations using the link: http://www.getlocalization.com/CPUAdjuster/
ROM cookers
You are able to include this app in your ROMs at your discretion but you meet the following rules:
- Can't theme the app
- Can't make any modification in the app
- Can't resign the app
- Thank in the ROM thread
- If you're interested to set default values for any parameter in your ROM, you can contact via PM or email
PLEASE, IF YOU'VE ISSUES: CONTACT
DIRECT DOWNLOAD
CHANGELOG
1.0.0
First release
1.1.0
Added charger voltages to the profiles view
Added 30 seconds delay before first profile activation (after on boot event)
Added a file in /sdcard/CpuProfiles/files-initialization.log to control missing files (post if app shows the missing files message)
Added a file in /sdcard/CpuProfiles/automation.log to control the automatically activated profiles
Added compatibility with Android 2.2 (Froyo) and higher
Added ads in the main activity
Solved bugs
1.3.0
Removed toast on service start/stop
Added compatibility with old devices
Added more compatibility with charger voltages
Added more compatibility with gpu voltages
Added current voltages in cpu history tab
Added battery info to the device info tab
Added notification at startup to countdown the service autostart
More accurated kernel info in the device info tab
Corrected some strings
1.4.5
Added more support to overclock/underclock
Added support for non rooted devices (in read mode, of course)
Added in app billing donation
Expanded voltages in profiles voltages view by default
Number of processors is correctly counted in quadcore processors
Added option to modify all voltages at the same time (in cpu voltages view and in gpu voltages view [in profile edition])
Small UI improvements
Added german translation (thank's to [email protected])
Added french translation (thank's to The [email protected])
Added spanish translation
1.4.6
Added ability to disable profiles
Small strings update
1.5.0
Enable/disable second core for profile (only available for Tegrak dual core)
Profiles are now marked disabled after creation or edition (for security purposes)
In profiles list, if you edit the active profile, the active profile mark dissapears
1.5.1
Fixed issue with some kernels that don't exports CPU frequencies
1.6.0
Graph with CPU speed evolution (it can be run in background, for statistical purposes)
Ability to clear history (time in states)
UI improvements (subtitle font color themeable and other small changes)
1.7.0
Corrected bug in CPU history percents, they miscalculate afther a clear
Compatible with more devices
Capable to show real history (even if you've previously cleared)
Bugfixes
1.8.0
Capable to activate/deactivate single cores in quadcore processors (SGN-II, ...) [if kernel supports it]
Added some dialogs in profile settings in order to clarify
1.8.1
Corrected bug in CPU speed statistics (for kernels that doesn't export CPU frequencies)
Updated translations
2.0.0 (important notice)
Compatibility with more devices
Added per-app activation to profiles
UI improvements
Added current GPU speed to the general info tab
Notifications can be show in toasts or in status bar
Added CPU history graph in general tab
Added GPU current speed in GPU tab (in profile edit view)
Added GPU minimum time in state for profile (this is the minimum time that GPU remains in a state even if charge load changes)
Added portuguese translation (thanks to [email protected])
2.0.1
Small bugfixes
Added setting to configure the startup notification behavior
2.0.2
Small bugfixes
Add toggle to show CPU speed in general tab in text or graph format. Simply click in the graph to show CPU speed in text format or in the text to show the graph
2.0.3
Cosmetic changes
Toggle in profiles tab show service status nor the user enable state (this only affects after a upgrade)
2.1.0
Added ability to overclock GPU (kernel/device specific feature)
Solved service status toggle issue
GPU management compatible with Siyah kernel
Upgraded to In-App billing v3
Bugs fixed
2.1.2
Little bug corrected
2.1.3
Small improvements
Small UI changes
More accurated GPU speed calculation (useful for devices that uses non standard speeds)
2.3.1
Added GPU up/down thresholds
Added GPU help dialog (press menu key in GPU tab in Profile Edition activity
Tweaks for specific governors: ondemand, lulzactive, smartass, conservative and interactive
Solved issues with trial period calculation
Added battery up time to general tab
Added screen on time to general tab
Removed auto update of general tab (except for CPU and GPU speed) [really isn't needed and stress up the cpu]
Added refresh button to general tab
Added chinese translation
Minor UI changes
2.4.0
Enable/Disable group of tweaks in each profile
Solved bug when upgrade and SuperSU is set to forget permissions on reinstall
2.4.1
Added tweaks for pegasusq
Added switch to show governor parameter descriptions in english (more accurated)
Bugfixes
2.5.0
Capable to apply your settings on-the-fly, without define a profile
Linked up and down thresholds in GPU
Internal improvements
2.5.5
Added total/free RAM in general tab
Internal improvements in superuser adquisition
2.5.6
Added support for kernels that don't export GPU thresholds
2.6.0
Added support for custom init.d scripts (look in settings)
2.6.1
Added support for some MALI parameters (look in profile advanced tab)
Added hungarian translation (thanks to szornyu)
2.6.2
Added ability to create folders (from init.d scripts folder selection)
Removed 14 days demo period (no expiration time now)
2.6.3
Small improvements
Updated translations for french, hungarian, chinese and german
2.6.4
Added shortuts to running apps and battery usage in CPU general tab (click in the six last items)
2.6.7
Added improvements to ROM cookers support
2.6.8
Added italian translation (thanks to [email protected])
2.6.9
Compatibility improvements
2.7.0
Activation times for profile (statistical info) in profiles tab
Setting to control if frequencies are set before or after the voltages
Information dialogs
2.7.3
Solved little bug when calculating profile active times
Added boot delay timeout (from 0 to 90 seconds, default 30 seconds)
Updated german, hungarian and italian translations
2.7.4
Updated german, hungarian, chinesse and italian translations
2.7.5
Correct bug calculating profile activation time
Updated german translation
2.7.6
Improvements in the init.d folder selection dialog
Added a handbook to the /sdcard/CpuProfiles folder
Minor updates in chinese, hungarian, italian, deutch and french translations
2.8.0
Profiles sorted using priority value
Apps selector sort list using the app label
Added max CPU frequency when screen if off (if kernel supported)
Shows multicore information for each core separately (CPU speed, CPU history) (if kernel provides the information)
Added battery temperature to general tab
Removed capture statistics activiy (really isn't needed)
Added russian translation (thanks to DEADover)
2.8.2
Max/Min GPU voltages calculation update
Added changelog (goto settings)
2.8.3
Corrected bug in max/min GPU voltages calculation
Updated translations
2.8.4
A bit un-stresses CPU when calculatin the current CPU speed in general view
Added partial slovenian translation (thanks to MMtranslating)
2.8.5
Added new superuser permission to manifest
Solved certain issues with Galaxy Nexus
Updated Slovenian translation
2.8.6
Compatibility with max/min/governor for kernels that don't shares the cpu core values
Solved issues with notifications when a core is disabled and you want to show the current CPU speed or history
Removed apps selector for screen off profile (has no sense)
Updated Slovenian and russian translations
2.8.7
Added new profile type: After boot active for X minutes
2.8.8
Check app signature at startup
Updated translations
2.8.9
Corrected bug in profile apps selection
Updated translations
2.9.0
Added more control in governor tweaks in order to test if files exists before set the values (prevent fails if files don't exists)
Added support to kernels that uses no standard values to set the CPU voltage steps (like Kowalski for LG Optimus 2X)
Added support to kernels that limites min/max GPU frequencies (like Perseus for Samsung Galaxy Note II)
2.9.1
Logcat for the app is set to false by default (enable it in settings if you need send a log to me)
3.0.0
Added ability to send logs to the developer without use any external software (go settings to generate and send it)
Added ability to export logcat to sdcard (normal and colored log) [PRO feature]
Added graceful time to In-App license verification (for those that has a unstable connection)
Added beta channel (enable it in settings and receive updates directly on your device) [PRO feature]
Preferences activity resorted
Solved issue in some devices that aren't running application after boot if screen is off
3.0.1 (only in Beta Channel for now)
Tweaks for more governors
3.0.3 (only in Beta Channel for now)
Corrected bug in Beta version mamagement
3.0.4 (only in Beta Channel for now)
Added tweaks for more CPU governors
Added tools menu (only option is "forze media scan" for now)
3.0.5
Includes all unreleased beta code in the general app
Compatibility updates
3.0.6
Bug corrected
3.0.8 (only in beta channel for now)
Uses real external storage unit for backup/restore in Samsung devices, if available
3.0.9 (only in beta channel for now)
Added general kernel preferences that are loaded in boot time (if configured)
For now general preferences includes ability to set max. battery charge percent and force fast charge (all features are kernel dependent, of course)...
3.0.10 (only in beta channel for now)
CPU voltages interface supports most kernels for Nexus4
3.0.11 (only in beta channel for now)
Allow to update vibration intensity in kernel settings
3.0.12
Previous beta updates published to all
Bugs corrected
Translations updated
Please add custom USB/DC charging voltages and Sound Volume tweaks.
rgreat said:
Please add custom USB/DC charging voltages and Sound Volume tweaks.
Click to expand...
Click to collapse
Added to To-Do list.
Thank's
Could u list what voltages work best for CPU speeds
Sent from my SGH-T679 using Xparent ICS Tapatalk 2
hatememarkz said:
Could u list what voltages work best for CPU speeds
Sent from my SGH-T679 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
it depends from the device, rom and cpu.
try to low 25 each step and, if working fine down another 25 until you have
freezes or reboots
Here's more info
Sent from my SGH-T679 using Xparent ICS Tapatalk 2
Not working for Xperia S on stock based rom. Says missing files.
Sent from my awesome Xperia S 'Nozomi'
l.Urker said:
Not working for Xperia S on stock based rom. Says missing files.
Sent from my awesome Xperia S 'Nozomi'
Click to expand...
Click to collapse
please
send me a logcat
A nice new tool. If you need a German translator for this APP ...
l.Urker said:
Not working for Xperia S on stock based rom. Says missing files.
Click to expand...
Click to collapse
I would be interested in this tool for Jelly Bean. I tried it and I also get this message.
As for translation, I can take care of french!
parse error.on huawei u8230 cm7.kernell 2.6.32
desalesouche said:
parse error.on huawei u8230 cm7.kernell 2.6.32
Click to expand...
Click to collapse
sorry, v1 is only to ics and higher
i will release v2 in 1-2 days, with android 2.3 support.
stay connected
The Smith said:
I would be interested in this tool for Jelly Bean. I tried it and I also get this message.
As for translation, I can take care of french!
Click to expand...
Click to collapse
no problem.
please, send me a logcat with the app initialization, in order to known the missing filenames
bartito said:
no problem.
please, send me a logcat with the app initialization, in order to known the missing filenames
Click to expand...
Click to collapse
Awesome, will do very soon.
Hello,
Great app, thanks.
Default profile seems not automatically activated on boot.
I need to activate it manually even with check box "enable on boot" checked.
Behavior like "voltage control" app, automatic apply with countdown on notification to abort before apply if needed would be great.
Thanks
User_99 said:
A nice new tool. If you need a German translator for this APP ...
Click to expand...
Click to collapse
Thank's
Finishing a previous work and after that i will contact with you
The Smith said:
I would be interested in this tool for Jelly Bean. I tried it and I also get this message.
As for translation, I can take care of french!
Click to expand...
Click to collapse
Please, download 1.1.0 and try another time.
Post the /sdcard/CpuProfiles/files-initialization.log after error
desalesouche said:
parse error.on huawei u8230 cm7.kernell 2.6.32
Click to expand...
Click to collapse
1.1.0 is compatible with Gingerbread.
Please try it
cook said:
Hello,
Great app, thanks.
Default profile seems not automatically activated on boot.
I need to activate it manually even with check box "enable on boot" checked.
Behavior like "voltage control" app, automatic apply with countdown on notification to abort before apply if needed would be great.
Thanks
Click to expand...
Click to collapse
Solved in 1.1.0.
Please try it
bartito said:
Solved in 1.1.0.
Please try it
Click to expand...
Click to collapse
Default profile still not activated after boot.
Could you add mV on cpu main screen (there is enough space for it and it's convenient to be able to check without the need to expand the box)
Charge page typo. Replace mV by mA.
Hi, ran into missing files error as well. This is the file initialization log file. Am on Slimbean 3.
ls /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels: /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels: No such file or directory
Requested file /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq exists
Requested file /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state exists
Sent from my GT-N7000 using Tapatalk 2
Kersian beat me to it! I also was running Slim Bean 3.0.
I still have something for you. I tried it on Android 4.2 and still get a missing file error. I attached the logcat as requested, and the file output by the app itself tells us about the same missing file mentioned by Kersian.
BTW, in the warning popup at the beginning, if you want to be consistent with similar popups from other apps, we should read "Don't show anymore" and not "Doesn't show anymore".
Keep up the good work and let me know too if you want the french translations!
Hello everyone!
Performance Control is A CPU Control application bundled with AOKP (created by xoomdev).
I started modding and adding features to this application, with @educk, few months ago and now we decided to create a dedicated thread.
Functions:
Change CPU Governor, I/O Scheduler and Clock Speed
Battery information + Fast Charge setting + Battery Life eXtender setting
Change Voltages Assigned to each CPU frequency
Customize MinFree Task Killer (set the amount of RAM the minfree taskiller will keep), Not Killable Processes feature
Customize SD read-ahead
VM Settings such as: Dirty Ratio, Dirty Backgroud ratio, Dirty expire centisecs, Dirty writeback centrisecs, Minfree kbytes, Overcommit ratio, Swappiness and VFS Cache pressure, Dynamic Fsync, Backlight timeout, Backlight on touchscreen, Phantom Key Presses Filter
Integrated CPU Spy
Linux Kernel informations, CPU Informations, Memory Informations
Disk Informations
Tools: Custom shell command, Wipe cache+dalvik cache, Flash kernel or recovery (img files), Clean residual files, Optimize DBs
Depending on the kernel used, some application features will not be accessible, like: Voltage settings, Battery Life eXtender, etc
Requirements:
Root
Busybox
CM or other AOSP like ROM based on 4.0+ (tested only on 4.2.2.& 4.3)
For kernel developers:
Dynamic Fsync
Not Killable Processes
VDD Sysfs Interface - MSM7x30 boards
BLX (Battery Life eXtender)
Dynamic management of dirty page writebacks
APP is Licensed under GPL v3.
App sources here | Screenshots here | Download HERE
TIPS:
- You can open system battery informations by clicking on voltage value in Battery tab
- You can increase or decrease voltages by 25mV steps in Voltage Settings tab using menu
- You can change fast between flashing kernel or recovery using menu
- Switch fast between tabs using menu > Tabs
- Show / Hide Tabs feature in Meniu > App Settings
Changelog:
v2.2.5 [07.09.2014]
added the possibility to reorder tabs (menu > app settings > set tabs visibility - long press to reorder items)
updated spanish translation thanks to @DaniPhii
updated romanian translation
v2.2.4 [26.07.2014]
added backup/restore settings (menu > app settings)
all core status are displayed now on cpu settings tab
fixed issue with kernel/recovery backup custom names
updated russian translation thanks to @LeroViten
v2.2.3 [04.07.2014]
check for su & busybox at startup just once and when the rom is changed
updated russian translation thanks to @LeroViten
added support for GT-I9082 thanks to @TripRex
Old changelog:
v2.2.2 [30.06.2014]
added kernel/recovery backup option
Download: http://forum.xda-developers.com/showpost.php?p=53804588&postcount=675
v2.1.19 [20.05.2014]
added LiveOC support (not tested) - CPU Advanced TAB
changed boot toasts with notificaton
changed app icon
added option to restore settings from init.d script (some settings may be overwrited by system) - App Settings menu
v2.1.18 [09.05.2014]
fixed UI issue for some devices
fixed min/max freq issue for some devices
added support for S4 mini f4ktion kernel ( thanks to @F4k )
updated german translation thanks to @DF1E
updated russian translation thanks to @LeroViten
v2.1.17 [04.05.2014]
fixed issue with voltage tables in microvolts
v2.1.16 [03.05.2014]
Update Russian Translation thanks to @LeroViten
Updated Spanish translation thanks to @Garcia98
Added Nexus 5 (thanks to @educk) and Xperia U (thanks to @Garcia98) on supported devices list for kernel/recovery flash
Some small improvments and issues fixed
v2.1.15 [26.04.2014]
add support for krait undervolting (CPU Advanced Tab)
add support for Performance Profile
Any change of cpu freq. or governor will update Performance Profile default values (no need to reopen app. )
v2.1.14 [18.04.2014]
added support for voltage table located at: /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
fixed some issues with multicore devices
v2.1.13 [12.04.2014]
fixed sysctl editor issue
rewrite KSM/UKSM for compatibility with UKSM variants
added posibility to override sd path (menu > app settings)
added cpu information (cpu settings > menu)
added memory usage (memory tab > menu)
remove info tab
added some settings in cpu advanced tab
v2.1.10 [07.02.2014]
added IO Settings (menu CPU Tab)
added WIFI PM (Advanced Tab)
added Multicore PowerSaving (CPU Advanced Tab)
fixed zram display bug on multicore
some UI changes
update translations (thanks to @Rhonin86, @Stefano187, @DaniPhii, @LeroViten)
v2.1.9 [24.01.2014]
Added builtin automatic check for updates and posibility for download using Download Manager (menu > app settings)
Zram disk size display in Mb and percents
Started support multicore (new tab available CPU Advanced: mpdecision, intelliplug, ecomode, screen off max frequency, screen off min frequency- more will be added)
Tips: Tap on current frequecy to change cpu. LongTap to force cpu online/offline
Fixed some FC ( many thanks to: @dabl8, @Darian71, @houssam10001 )
v2.1.9 BETA 2 [05.01.2014]
You must uninstall previous version before installing the new one
Fixed compatibility with KK
Added logcat and dmesg dump (Tools Tab)
Added touchscreen control: s2w, h2w, etc (Advanced Tab)
Fixed zram
v2.1.8 [05.11.2013]
Fixed VM Settings & SysCtl Editor bug ( values not saved )
Added ondemandplus governor as settable
Added Spanish translation ( thanks to @DaniPhii )
v2.1.7 [03.11.2013]
Added SysCtl Editor - Tools Tab
Reworked VM Settings based on sysctl - it is necessary to reenter vm values
Added Simplified Chinese translation (thanks to @cyaniris )
Auto reload application after change tab visibility
v2.1.6 [26.10.2013]
Added Vibration Control - Advanced Tab
Added Extended VM Settings - Advanced Tab (remove VM Tab)
Support for Ultra KSM
Show / Hide Tabs feature in Meniu > App Settings
v2.1.5 [20.10.2013]
Added zRAM settings in Memory Tab
- thanks to @educk to achieve the kernel with zram support -
- tested only with zram module builtin kernel -
Added BuildProp Editor in Tools Tab
v2.1.4 [27.09.2013]
Fixed Dynamic Frequency Scaling issue (tested by @etch04)
v2.1.3 [26.09.2013]
added freeze / defrost packages (use menu to change between system and user packages)
added governor settings (not available for all governors)
move VM settings in a new tab
added Dynamic frequency scaling (not tested) http://forum.xda-developers.com/showthread.php?t=2308040
added italian translation thanks to @Stefano187
remove /data/PerformanceControl file
v2.1.2.1 [14.09.2013]
FC fixed when KSM not supported by system
v2.1.2 [13.09.2013]
Added KSM Settings in Memory TAB
Added more devices (for kernel and recovery flash) https://github.com/horn3t/android_packages_apps_PerformanceControl/blob/jb2/res/raw/devices.xml
v2.1.1 [06.09.2013]
Fixed loads of Force Closes on various devices
Added the possibility to individually delete residual files
Updated German Translations (thanks to Rhonin86)
Added Russian Translations (thanks to LeroViten)
v2.1.0 [29.08.2013]
Additional information's on DiskInfo tab (tap on each partition)
Added the ability to flash kernels/recoveries from ZIP too. (It doesn't have to contain META-INF)
Added the list of files from "Clean residual files"
v2.0.9 [24.08.2013]
Fixed Force Closes when setting TaskKiller values
v2.0.8 [22.08.2013]
New DiskInfo TAB - display the total and free space of: /system. /data, /cache, /sdcard, /ext-sd partitions
Added Optimize Databases (SQLite Vacuum) - Tools Tab
Change Fix Permission script for better compatibility with CM-10.2
Added Tab Menu (manage all tabs from one window -> accessible through the Menu key)
Added German and Romanian translations (thanks to Rhonin86 and Laurentyu1995)
Minor Bug Fixes
UI Improvements
v2.0.7 [16.08.2013]
Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
Added "Fix Permission" option (as it is removed from newer CWM recoveries)
Added "Clean Residual Files" option
Minor fixes
Download links now available in DevDB.
SGS3 support in future? because it looks pretty good and i wanna test.
Sent from my girls pants via Tapatalk IV
The best app for any custom kernel
Good job guys
Thank you
Sent from my GT-I8150 using xda premium
This is really cool !! Good job guys !! Many THANKS !!!
Sent from my GT-I9001 using xda app-developers app
Cartman44 said:
SGS3 support in future? because it looks pretty good and i wanna test.
Sent from my girls pants via Tapatalk IV
Click to expand...
Click to collapse
The app will work on any Android device which meets the requirements from the first post.
The only thing which currently doesn't work on SGS3 is the kernel and recovery flash. We will add this support for the SGS3 in the next release.
Sent from my GT-I9001 using xda app-developers app
Hi guys!
Version Performance Control v2.0.7 is available. Download link is second post.
Changelog:
Code:
[B]v2.0.7 [16.08.2013][/B]
*Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
*Added "Fix Permission" option (as it is removed from newer CWM recoveries)
*Added "Clean Residual Files" option
*Minor fixes
Holly shot!!! This app is getting sick cool!
Thanks guys, you've done an huge amount of job!
Sent from my GT-I8150 using Tapatalk 4
Thank
Hello all, I need 10 posts so Hurry and here
The application works great on Unofficial Carbon -
Thank you for it, and I look forward to more changes.
Regards writing using google translator
Awesome application,worx perfect on my LG Optimus L5 e610 with CM10.1.Great work,keep it up.Thanx comes later im limited for today.:thumbup::thumbup::thumbup:
GREEETZ WITH BEATZ!!!
CM 10.1 A8 GT-i8150
"Clean Residual Files" seem to not work app crash. (but what does it do exactly)
governor and scheduler doesn't set on boot, CM performance take control.
anyway great app
thanks
i dont have battery and voltage settings..kernel related limition?
EDIT: i just rebooted and when i checked on perfomance control it got reverted to the rom preinstalled version
fdc77 said:
CM 10.1 A8 GT-i8150
"Clean Residual Files" seem to not work app crash. (but what does it do exactly)
governor and scheduler doesn't set on boot, CM performance take control.
anyway great app
thanks
Click to expand...
Click to collapse
Force close the app
Then clear data of it ..
It is working fine here
Sent from my GT-I8150 using xda premium
boyheadkick said:
i dont have battery and voltage settings..kernel related limition?
EDIT: i just rebooted and when i checked on perfomance control it got reverted to the rom preinstalled version
Click to expand...
Click to collapse
Voltage Settings and Battery tab missing because your kernel. If your PerformanceControl is a system app you must replace it not just install.
fdc77 said:
CM 10.1 A8 GT-i8150
"Clean Residual Files" seem to not work app crash. (but what does it do exactly)
governor and scheduler doesn't set on boot, CM performance take control.
anyway great app
thanks
Click to expand...
Click to collapse
Clean residual files delete files from "/data/log","/data/tombstones","/data/system/dropbox","/data/system/usagestats","data/anr"
EDIT: if you want to use PerformanceControl app you must deselect CM performance.
@ the dev:can i have your permission to take it in a custom rom,i give proper credits for sure.thanx in advance.
-CALIBAN666- said:
@ the dev:can i have your permission to take it in a custom rom,i give proper credits for sure.thanx in advance.
Click to expand...
Click to collapse
of course you have
many thanx,will pressed later.
Really great app. It's easy to customize all of the kernel features.
Every custom ROM should have it. :good:
Madridii said:
Force close the app
Then clear data of it ..
It is working fine here
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
done but it doesn't work for me on any reboot and any governor i set it Always return ti "interactive" like CM standard setting
i'm using kernel 3.4.57 revert by leroviten i don't think it's a problem
Performance Control is A CPU Control application bundled with AOKP (created by xoomdev).
I started modding and adding features to this application, with @educk, few months ago and now we decided to create a dedicated thread.
Functions:
Change CPU Governor, I/O Scheduler and Clock Speed
Battery information + Fast Charge setting + Battery Life eXtender setting
Change Voltages Assigned to each CPU frequency
Customize MinFree Task Killer (set the amount of RAM the minfree taskiller will keep), Not Killable Processes feature
Customize SD read-ahead
VM Settings such as: Dirty Ratio, Dirty Backgroud ratio, Dirty expire centisecs, Dirty writeback centrisecs, Minfree kbytes, Overcommit ratio, Swappiness and VFS Cache pressure, Dynamic Fsync, Backlight timeout, Backlight on touchscreen, Phantom Key Presses Filter
Integrated CPU Spy
Linux Kernel informations, CPU Informations, Memory Informations
Disk Informations
Tools: Custom shell command, Wipe cache+dalvik cache, Flash kernel or recovery (img files), Clean residual files, Optimize DBs
... and more
Depending on the kernel used, some application features will not be accessible, like: Voltage settings, Battery Life eXtender, etc
Requirements:
Root
Busybox
CM or other AOSP like ROM based on 4.0+
APP is Licensed under GPL v3.
TIPS:
- You can open system battery informations by clicking on voltage value in Battery tab
- You can increase or decrease voltages by 25mV steps in Voltage Settings tab using menu
- You can change fast between flashing kernel or recovery using menu
- Switch fast between tabs using menu > Tabs
XDA:DevDB Information
PerformanceControl, Tool/Utility for all devices (see above for details)
Contributors
h0rn3t, educk, Rhonin86,Laurentyu1995,LeroViten,Evisceration,Stefano187,cyaniris
Version Information
Status: Stable
Current Stable Version: 2.2.3
Stable Release Date: 2014-05-09
Created 2013-09-14
Last Updated 2014-07-04
Changelog
v2.2.5 [07.09.2014]
added the possibility to reorder tabs (menu > app settings > set tabs visibility - long press to reorder items)
updated spanish translation thanks to @DaniPhii
updated romanian translation
v2.2.4 [26.07.2014]
added backup/restore settings (menu > app settings)
all core status are displayed now on cpu settings tab
fixed issue with kernel/recovery backup custom names
updated russian translation thanks to @LeroViten
v2.2.3 [04.07.2014]
check for su & busybox at startup just once and when the rom is changed
updated russian translation thanks to @LeroViten
added support for GT-I9082 thanks to @TripRex
Old changelog:
v2.2.2 [30.06.2014]
added kernel/recovery backup option
Download: http://forum.xda-developers.com/showpost.php?p=53804588&postcount=675
v2.2.0 [29.06.2014]
enable/disable MSM HOTPLUG - added by @F4k
added Battery Calibration - menu battery tab
fast charge notification is now clearable
v2.1.19 [20.05.2014]
added LiveOC support (not tested) - CPU Advanced TAB
changed boot toasts with notificaton
changed app icon
added option to restore settings from init.d script (some settings may be overwrited by system) - App Settings menu
v2.1.18 [09.05.2014]
fixed UI issue for some devices
fixed min/max freq issue for some devices
added support for S4 mini f4ktion kernel ( thanks to @F4k )
updated german translation thanks to @DF1E
updated russian translation thanks to @LeroViten
v2.1.17 [04.05.2014]
fixed issue with voltage tables in microvolts
v2.1.16 [03.05.2014]
Update Russian Translation thanks to @LeroViten
Updated Spanish translation thanks to @Garcia98
Added Nexus 5 (thanks to @educk) and Xperia U (thanks to @Garcia98) on supported devices list for kernel/recovery flash
Some small improvments and issues fixed
v2.1.15 [26.04.2014]
add support for krait undervolting (CPU Advanced Tab)
add support for Performance Profile
Any change of cpu freq. or governor will update Performance Profile default values (no need to reopen app. )
v2.1.14 [18.04.2014]
added support for voltage table located at: /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
fixed some issues with multicore devices
v2.1.13 [12.04.2014]
fixed sysctl editor issue
rewrite KSM/UKSM for compatibility with UKSM variants
added posibility to override sd path (menu > app settings)
added cpu information (cpu settings > menu)
added memory usage (memory tab > menu)
remove info tab
added some settings in cpu advanced tab
v2.1.10 [07.02.2014]
added IO Settings (menu CPU Tab)
added WIFI PM (Advanced Tab)
added Multicore PowerSaving (CPU Advanced Tab)
fixed zram display bug on multicore
some UI changes
update translations (thanks to @Rhonin86, @Stefano187, @DaniPhii, @LeroViten)
v2.1.9 [24.01.2014]
Added builtin automatic check for updates and posibility for download using Download Manager (menu > app settings)
Zram disk size display in Mb and percents
Started support multicore (new tab available CPU Advanced: mpdecision, intelliplug, ecomode, screen off max frequency, screen off min frequency- more will be added)
Tips: Tap on current frequecy to change cpu. LongTap to force cpu online/offline
Fixed some FC ( many thanks to: @dabl8, @Darian71, @houssam10001 )
v2.1.9 BETA 2 [05.01.2014]
You must uninstall previous version before installing the new one
Fixed compatibility with KK
Added logcat and dmesg dump (Tools Tab)
Added touchscreen control: s2w, h2w, etc (Advanced Tab)
Fixed zram
v2.1.8 [05.11.2013]
Fixed VM Settings & SysCtl Editor bug ( values not saved )
Added ondemandplus governor as settable
Added Spanish translation ( thanks to @DaniPhii )
v2.1.7 [03.11.2013]
Added SysCtl Editor - Tools Tab
Reworked VM Settings based on sysctl - it is necessary to reenter vm values
Added Simplified Chinese translation (thanks to @cyaniris )
Auto reload application after change tab visibility
v2.1.6 [26.10.2013]
Added Vibration Control - Advanced Tab
Added Extended VM Settings - Advanced Tab (remove VM Tab)
Support for Ultra KSM
Show / Hide Tabs feature in Meniu > App Settings
v2.1.5 [20.10.2013]
Added zRAM settings in Memory Tab
- thanks to @educk to achieve the kernel with zram support -
- tested only with zram module builtin kernel -
Added BuildProp Editor in Tools Tab
v2.1.4 [27.09.2013]
Fixed Dynamic Frequency Scaling issue (tested by @etch04)
v2.1.3 [26.09.2013]
added freeze / defrost packages (use menu to change between system and user packages)
added governor settings (not available for all governors)
move VM settings in a new tab
added Dynamic frequency scaling (not tested) http://forum.xda-developers.com/showthread.php?t=2308040
added italian translation thanks to @Stefano187
remove /data/PerformanceControl file
v2.1.2.1 [14.09.2013]
FC fixed when KSM not supported by system
v2.1.2 [13.09.2013]
Added KSM Settings in Memory TAB
Added more devices (for kernel and recovery flash) https://github.com/horn3t/android_packages_apps_PerformanceControl/blob/jb2/res/raw/devices.xml
v2.1.1 [06.09.2013]
Fixed loads of Force Closes on various devices
Added the possibility to individually delete residual files
Updated German Translations (thanks to Rhonin86)
Added Russian Translations (thanks to LeroViten)
v2.1.0 [29.08.2013]
Additional information's on DiskInfo tab (tap on each partition)
Added the ability to flash kernels/recoveries from ZIP too. (It doesn't have to contain META-INF)
Added the list of files from "Clean residual files"
v2.0.9 [24.08.2013]
Fixed Force Closes when setting TaskKiller values
v2.0.8 [22.08.2013]
New DiskInfo TAB - display the total and free space of: /system. /data, /cache, /sdcard, /ext-sd partitions
Added Optimize Databases (SQLite Vacuum) - Tools Tab
Change Fix Permission script for better compatibility with CM-10.2
Added Tab Menu (manage all tabs from one window -> accessible through the Menu key)
Added German and Romanian translations (thanks to Rhonin86 and Laurentyu1995)
Minor Bug Fixes
UI Improvements
v2.0.7 [16.08.2013]
Added recovery and kernel flash support for Samsung Galaxy S II and Samsung Galaxy S III
Added "Fix Permission" option (as it is removed from newer CWM recoveries)
Added "Clean Residual Files" option
Minor fixes
I can't find download link ?
Sent from my GT-I9082 using XDA Premium 4 mobile app
keshow said:
I can't find download link ?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
On top of thread you will see a black menu.
I beg you, Sir, make hiding chosen tabs in options, please!
pupakota said:
I beg you, Sir, make hiding chosen tabs in options, please!
Click to expand...
Click to collapse
Today I will release a new version. So, hide tabs option will be included in the next version.
Great news, tell me, is possible to make divided settings for i/o for internal and external storage?
I may sound weird, but are we sure ,that i/o seetings set by perfctrl are really set for everything at once?
And one more idea..more VM switches, like /proc/sys/vm/dirty_bytes , /proc/sys/vm/laptop_mode, /proc/sys/vm/min_free_order_shift , /proc/sys/vm/page-cluster, and so on?
Would it be hard to add such switches?
pupakota said:
Great news, tell me, is possible to make divided settings for i/o for internal and external storage?
I may sound weird, but are we sure ,that i/o seetings set by perfctrl are really set for everything at once?
And one more idea..more VM switches, like /proc/sys/vm/dirty_bytes , /proc/sys/vm/laptop_mode, /proc/sys/vm/min_free_order_shift , /proc/sys/vm/page-cluster, and so on?
Would it be hard to add such switches?
Click to expand...
Click to collapse
You can test with other similar applications and see if are really set.
In the new version you have builprop editor, so you can set other vm parameters.
@h0rn3t this app has all those feature which i need but i cant set the cpu freq. ,, the freq slider set itself to maximum level ,, the minimum and maximum slider set itself to maximum level after exiting the app,,, dont know its a bug or only with me,,, but i can set freq with set cpu properly
Mohanshbhr said:
@h0rn3t this app has all those feature which i need but i cant set the cpu freq. ,, the freq slider set itself to maximum level ,, the minimum and maximum slider set itself to maximum level after exiting the app,,, dont know its a bug or only with me,,, but i can set freq with set cpu properly
Click to expand...
Click to collapse
What rom and kernel do you use?
h0rn3t said:
What rom and kernel do you use?
Click to expand...
Click to collapse
stock samsung tw rom with stock kernel (rooted, unsecured, init.d)... its i can set cpu freq sliders properly with set cpu,,, i was thinking its happening due to conflict with setcpu so i flashed new rom and reinstalled this appwithout any tweaks to test but the result was same,, as soon as i exit app after setting sliders it set itself to maximum level,,, on more thing in time in sate phone goes to deep sleep and freq is also at minimum level most of time,, dont know why only slider goes to maximum level....
Mohanshbhr said:
stock samsung tw rom with stock kernel (rooted, unsecured, init.d)... its i can set cpu freq sliders properly with set cpu,,, i was thinking its happening due to conflict with setcpu so i flashed new rom and reinstalled this appwithout any tweaks to test but the result was same,, as soon as i exit app after setting sliders it set itself to maximum level,,, on more thing in time in sate phone goes to deep sleep and freq is also at minimum level most of time,, dont know why only slider goes to maximum level....
Click to expand...
Click to collapse
Look on OP at Requirements.
Do you have a multicpu device? In this case mpdecision reset the frequencies.
Hi
Can anyone help. I don't see any download link in OP posting.
Thanks
smohanv said:
Hi
Can anyone help. I don't see any download link in OP posting.
Thanks
Click to expand...
Click to collapse
Look at the black menu !!!!
http://forum.xda-developers.com/devdb/project/?id=600#downloads
Superb Work...
Always wanted one..!!!
Hi,
i'm actually testing [ROM][KK][4.4.2][KOT49H] ★★★ BEAN KAT v.5 + [Kernel] CM 11 - 4.4.2 - [ION+PMEM] Khan Kernel v1.1 on my Galaxy Wonder.
I tried to change some settings via performance control 2.18 but some values in build.prop, vm, i/o scheduler are not applied.
I dont know if this issues are rom, kernel or performance control related, but in the signature of some sgs+ developers i saw that they are actually using performance control 2.19b.
Maybe the issues are going to be fixed in the next version.
Cheers
tycoo said:
Hi,
i'm actually testing [ROM][KK][4.4.2][KOT49H] ★★★ BEAN KAT v.5 + [Kernel] CM 11 - 4.4.2 - [ION+PMEM] Khan Kernel v1.1 on my Galaxy Wonder.
I tried to change some settings via performance control 2.18 but some values in build.prop, vm, i/o scheduler are not applied.
I dont know if this issues are rom, kernel or performance control related, but in the signature of some sgs+ developers i saw that they are actually using performance control 2.19b.
Maybe the issues are going to be fixed in the next version.
Cheers
Click to expand...
Click to collapse
Yes, there were some incompatibilities with KK. If you want to test and report, here is a new beta version: View attachment 2493900
You must uninstall previous version before install new one.
h0rn3t said:
Yes, there were some incompatibilities with KK. If you want to test and report, here is a new beta version: View attachment 2493900
You must uninstall previous version before install new one.
Click to expand...
Click to collapse
Thx a lot!
I tested it and want to report that i dont see anymore problems atm.
I successfully changed and applied following settings:
- cpu frequencies, governor, scheduler, set on boot
- Battery Life eXtender value, set on boot
- minfree memory settings, LowMemoryKiller management of not killable processes, ksm - enable/disable on boot, zram - start/stop - change size value - set on boot
- dynamic fscync - enable/disable on boot
- vm settings - changed swappines & vfs_cache_pressure - set on boot
- disk info - sdcard 1 + 2 is shown again
- build.prop - changed ro.config.low_ram from false to true and back
Great work!
Cheers
tycoo said:
Thx a lot!
I tested it and want to report that i dont see anymore problems atm.
I successfully changed and applied following settings:
- cpu frequencies, governor, scheduler, set on boot
- Battery Life eXtender value, set on boot
- minfree memory settings, LowMemoryKiller management of not killable processes, ksm - enable/disable on boot, zram - start/stop - change size value - set on boot
- dynamic fscync - enable/disable on boot
- vm settings - changed swappines & vfs_cache_pressure - set on boot
- disk info - sdcard 1 + 2 is shown again
- build.prop - changed ro.config.low_ram from false to true and back
Great work!
Cheers
Click to expand...
Click to collapse
Thank you for testing & reporting!:good:
2.1.9 Beta 2
Fixed compatibility with KK
Added logcat and dmesg dump (Tools Tab)
Added touchscreen control: s2w, h2w, etc (Advanced Tab) - not tested, need feedback !
Fixed zram