Related
Hi,
I tested microHDMI cable today and connected pad to the HDTV. Works amazingly well. Surprised.
I was watching picture gallery, a HD movie and just took a quick 10 minute test.
I wonder what could be other practical things and what this could be used for:
- presentations
- music, of course
- games? how?
I have a problem with a fact that when the screen goes off - tablet is locked - movies stop playing.
This means the screen of pad must be always "on". So you basically have two screens. Not practical. Any workaround?
Same goes for games. I noticed i still have to look at the tablet to know where to press on the screen, so except when using the game controller and screen on....it is not possible to play on TV.
Am I correct? Any practical ideas? What can we use HDMI for.
My cable is also ethernet capable, which i didn't even know it exists. What about that? How to use that?
Sorry, many questions
Svashtar said:
Same goes for games. I noticed i still have to look at the tablet to know where to press on the screen, so except when using the game controller and screen on....it is not possible to play on TV.
Click to expand...
Click to collapse
A gamepad/controller will solve that issue. I agree that using the tablet for input and TV for displaying the output is not ideal
I've used the tablet with a micro-HDMI cable and BSPlayer with great results. It supports LAN mode (SBM/Windows file sharing), and can stream directly from RAR archives. Great for watching TV shows, etc for those of us who can't get Netflix, Hulu and so on.
My cable is also ethernet capable, which i didn't even know it exists. What about that? How to use that?
Click to expand...
Click to collapse
This is a feature added in the HDMI 1.4 specification. It basically throws in a full duplex 100 Mbps Ethernet link alongside everything else going through the cable. It needs to be supported by both ends, and is mostly for TVs, receivers, etc. As far as I know, the TF700 does not support it, I'd be surprised if it did.
The cable is just transporting the signal, but manufacturers (and especially eBay sellers) love putting on features like that on HDMI cables. "3D support! Ethernet support! Will get you laid!" and so on
(More on HDMI 1.4, as well as version comparisons: http://en.wikipedia.org/wiki/HDMI#Version_1.4)
I know at least for my phone...I never really use it for anything more than playing a couple games with a controller, watching a video, or viewing photos. Maybe browsing the web, but not really. Emulators are the best, I love being able to play a little Super Smash Bros or Zelda: OoT on my TV via my phone (and tablet).
Svashtar said:
I have a problem with a fact that when the screen goes off - tablet is locked - movies stop playing.
This means the screen of pad must be always "on". So you basically have two screens. Not practical. Any workaround?
Click to expand...
Click to collapse
Dice Player has a Background playback.
You could hook up a PS3 controller and play some games like Shadowgun and GTA3 without having to root your device for the SixAxis app.
Sent from my HTC Sensation using Tapatalk 2
I ended up with the note after replacing my tf101 with the tf300 and tested the note and loved it in every way.
I'm not really even missing the keyboard dock and finding many ways to use the spen on a regular basis.
What I'd love though is to basically use the note as a digital whiteboard for teaching. Essentially to be able to write in smote or quill while sending the screen display over wifi to the PC connected to the projector system. Is there any way to do this? To do a live screencast from the note to a PC?
Sent from my MB855 using Tapatalk 2
jeggen said:
I ended up with the note after replacing my tf101 with the tf300 and tested the note and loved it in every way.
I'm not really even missing the keyboard dock and finding many ways to use the spen on a regular basis.
What I'd love though is to basically use the note as a digital whiteboard for teaching. Essentially to be able to write in smote or quill while sending the screen display over wifi to the PC connected to the projector system. Is there any way to do this? To do a live screencast from the note to a PC?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
AllShare?
ljcook said:
AllShare?
Click to expand...
Click to collapse
Have had zero luck even getting it to connect. PC install didn't work at work, tried at home and apparently needed to let it restart and then install all over. Still cannot connect the device though, device always scans when I turn on AllShare cat in network and Allshare on the PC recognizes an "intel" device. Thought for sure the Note would appear there.
Any tips on how to use it?
Does it actually do this? I gave up on it because what I see on Samsung's website only talks about sharing music/video and I didn't see any mention of streaming the tablet display to the PC. (Except the idea that you could watch a game on the PC, but see nothing about this in the app itself.)
jeggen said:
Have had zero luck even getting it to connect. PC install didn't work at work, tried at home and apparently needed to let it restart and then install all over. Still cannot connect the device though, device always scans when I turn on AllShare cat in network and Allshare on the PC recognizes an "intel" device. Thought for sure the Note would appear there.
Any tips on how to use it?
Does it actually do this? I gave up on it because what I see on Samsung's website only talks about sharing music/video and I didn't see any mention of streaming the tablet display to the PC. (Except the idea that you could watch a game on the PC, but see nothing about this in the app itself.)
Click to expand...
Click to collapse
Were you able to figure this out? I'm a teacher as well and do things with my HP tablet, but really want to with many Note.
You can execute AllShare through Samsung Kies, as well.
My suggestion would be to try and look at Remotes. You may be able to find drawing input ones. I use Unified Remote for using my phone/tablet as an input device. Although, the free version is limited to about 13 remotes or so. With the pro version you get it up in it's 50's. I'm not sure if this has what you're looking for but you can make your own custom remotes.
Or, alternatively, you can use a Remote Desktop client. Some of these may adjust your screen resolution on the PC so it fits well in the Note 10, but you can easily change it back. But it'll effect the view on the tablet. For this, I use Splashtop 2 HD.
zaslamel42 said:
You can execute AllShare through Samsung Kies, as well.
My suggestion would be to try and look at Remotes. You may be able to find drawing input ones. I use Unified Remote for using my phone/tablet as an input device. Although, the free version is limited to about 13 remotes or so. With the pro version you get it up in it's 50's. I'm not sure if this has what you're looking for but you can make your own custom remotes.
Or, alternatively, you can use a Remote Desktop client. Some of these may adjust your screen resolution on the PC so it fits well in the Note 10, but you can easily change it back. But it'll effect the view on the tablet. For this, I use Splashtop 2 HD.
Click to expand...
Click to collapse
What is Samsung Kies and what is Remotes?
I've done some investigating and I think the only way that AllShare works to screencast to another device is to send it to an AllShare Play device. Unfortunately I don't think (but really hope I'm wrong) the PC software works this way.
I'm curious, has anyone tried the VNC Server for Android and tried connecting in a view mode on a PC?
https://play.google.com/store/apps/...lt#?t=W251bGwsMSwyLDEsIm9yZy5vbmFpcHMudm5jIl0.
perhaps this is what you are looking for?
https://play.google.com/store/apps/details?id=com.splashtop.remote.WHITEBOARD&feature=nav_result#?t=W251bGwsMSwyLDNd
Working Solution
jeggen said:
I ended up with the note after replacing my tf101 with the tf300 and tested the note and loved it in every way.
I'm not really even missing the keyboard dock and finding many ways to use the spen on a regular basis.
What I'd love though is to basically use the note as a digital whiteboard for teaching. Essentially to be able to write in smote or quill while sending the screen display over wifi to the PC connected to the projector system. Is there any way to do this? To do a live screencast from the note to a PC?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
This is the setup I use and would suggest to everone in need to present from Galaxy Note 10.1:
buy Allshare Cast dongle , search for it on Amazon
buy HDMI to VGA adapter
connect HDMI to VGA adapter to projector and Allshare to A/C
on Note 10.1, Settings/More Settings/AllShareCast, the dongle will be detected something like "Dongle-xxxxx", tap to connect
When connected, start to present, wireless, move in the room, take the S-Pen and highlight the important topics etc.
On that way, no hassles with connection to PC/laptop and then to projector. AND the coolness factor is priceless! Every time I present there is a WOW factor, the downturn is sometimes people are not listening to my presentation but wants to see the technology.
And the Apple fanboys in the meetings around with their iPads - can you imagine several of them told me "nah, that is PROPRIETARY technology" !? LOL! I was very respectful before to other people opinions and personally I am very thankful to the genius work of Steve Jobs but in recent time I simple shoot back very sharp - face it, Apple funboy!
wolfindersteppe said:
This is the setup I use and would suggest to everone in need to present from Galaxy Note 10.1:
buy Allshare Cast dongle , search for it on Amazon
buy HDMI to VGA adapter
connect HDMI to VGA adapter to projector and Allshare to A/C
on Note 10.1, Settings/More Settings/AllShareCast, the dongle will be detected something like "Dongle-xxxxx", tap to connect
When connected, start to present, wireless, move in the room, take the S-Pen and highlight the important topics etc.
On that way, no hassles with connection to PC/laptop and then to projector. AND the coolness factor is priceless! Every time I present there is a WOW factor, the downturn is sometimes people are not listening to my presentation but wants to see the technology.
And the Apple fanboys in the meetings around with their iPads - can you imagine several of them told me "nah, that is PROPRIETARY technology" !? LOL! I was very respectful before to other people opinions and personally I am very thankful to the genius work of Steve Jobs but in recent time I simple shoot back very sharp - face it, Apple funboy!
Click to expand...
Click to collapse
Is thi similar to AppleTV and Airplay? Does it mirror everything at all times or only certain apps? Thanks for your help!!!
shrek4224 said:
Is thi similar to AppleTV and Airplay? Does it mirror everything at all times or only certain apps? Thanks for your help!!!
Click to expand...
Click to collapse
I don not own any Apple product and cannot say anything about it.
Everything what you can see on your Note 10.1 screen you are seeing parallel on the second display. I have tested it with several projectors from Dell, Sony, signal to those devices over their VGA ports and the experience is exactly the same to one with the laptop connected to the projector. The best result is via HDMI port, majority of the business projectors do not have one but monitors and TV have them and the result is gorgeous, beside the screen the audio is transferred too.
The video player is optimized for the AllShare Cast, when playing you can see the video on the second screen and on Note 10.1 you have the control menu.
Polaris office works fine too, same experience, WYSIWYG on both screens. For slides (aka PowerPoint), when connected to AllShare Cast dongle, the slide show button clicked shows the selection of
Primary display
Dual monitor
Controller & Note
but only the Primary display selection switches to presenter mode. Even then, the pen modes is active so you can annotate with S-Pen direct on the slides during the presentation, the killing feature for me.
Small downturn - multiscreen is not working when connected to Allshare Cast dongle, only single screens, but the floating helicopter videos is working and that is impressive for entertaining the people after the work is done :fingers-crossed:.
wolfindersteppe said:
I don not own any Apple product and cannot say anything about it.
Everything what you can see on your Note 10.1 screen you are seeing parallel on the second display. I have tested it with several projectors from Dell, Sony, signal to those devices over their VGA ports and the experience is exactly the same to one with the laptop connected to the projector. The best result is via HDMI port, majority of the business projectors do not have one but monitors and TV have them and the result is gorgeous, beside the screen the audio is transferred too.
The video player is optimized for the AllShare Cast, when playing you can see the video on the second screen and on Note 10.1 you have the control menu.
Polaris office works fine too, same experience, WYSIWYG on both screens. For slides (aka PowerPoint), when connected to AllShare Cast dongle, the slide show button clicked shows the selection of
Primary display
Dual monitor
Controller & Note
but only the Primary display selection switches to presenter mode. Even then, the pen modes is active so you can annotate with S-Pen direct on the slides during the presentation, the killing feature for me.
Small downturn - multiscreen is not working when connected to Allshare Cast dongle, only single screens, but the floating helicopter videos is working and that is impressive for entertaining the people after the work is done :fingers-crossed:.
Click to expand...
Click to collapse
That sounds amazing. I'd love to see a video of it all in action. Sounds great, especially being able to run a presentation and markup with the pen, but would like to see it before dropping about $100 on the setup.
I've been testing splashtop whiteboard but have had problems getting it to connect. Sometimes it will.... sometimes it won't. Would prefer to just screencast and run everything from the tablet anyway. The presentation mode sounds impressive and ability to swith into Sketchbook or snotes would be great.
Sent from my MB855 using Tapatalk 2
wolfindersteppe said:
I don not own any Apple product and cannot say anything about it.
Everything what you can see on your Note 10.1 screen you are seeing parallel on the second display. I have tested it with several projectors from Dell, Sony, signal to those devices over their VGA ports and the experience is exactly the same to one with the laptop connected to the projector. The best result is via HDMI port, majority of the business projectors do not have one but monitors and TV have them and the result is gorgeous, beside the screen the audio is transferred too.
The video player is optimized for the AllShare Cast, when playing you can see the video on the second screen and on Note 10.1 you have the control menu.
Polaris office works fine too, same experience, WYSIWYG on both screens. For slides (aka PowerPoint), when connected to AllShare Cast dongle, the slide show button clicked shows the selection of
Primary display
Dual monitor
Controller & Note
but only the Primary display selection switches to presenter mode. Even then, the pen modes is active so you can annotate with S-Pen direct on the slides during the presentation, the killing feature for me.
Small downturn - multiscreen is not working when connected to Allshare Cast dongle, only single screens, but the floating helicopter videos is working and that is impressive for entertaining the people after the work is done :fingers-crossed:.
Click to expand...
Click to collapse
First off thank you for your help and input. My school is going to purchase this for me but I have one additional question. We do not have HDMI projectors in our building. I was wondering if an HDMI-VGA adapter would work? It will not provide true 1080P but that is a non-issue for me. I only want to be able to project the S-Note or any note app so my students can take notes on what I am writing. Again thank you for your help.
shrek4224 said:
First off thank you for your help and input. My school is going to purchase this for me but I have one additional question. We do not have HDMI projectors in our building. I was wondering if an HDMI-VGA adapter would work? It will not provide true 1080P but that is a non-issue for me. I only want to be able to project the S-Note or any note app so my students can take notes on what I am writing. Again thank you for your help.
Click to expand...
Click to collapse
I use Gold Plated Premium HDMI to VGA Active M/F Adapter in White by Cable Matters (still cannot post links, just search for it on amazon) and it works, tested on several company's Dell and Sony projectors with VGA port.
FYI - I filed a support ticket with Polaris Office about not being able to use the different display modes. This was their response.
Dear customer,
Thank you for the inquiry.
We knew this issue already, we’re working on it now.
We’ll try hard to figure out the issue and let you know as soon as we’ve got the solution.
Please be patient and understand about it.
We will try hard to repay you for all your kindness.
Thanks for your interest.
Polaris Office CS Team
Click to expand...
Click to collapse
Hopefully they have a solution soon. The only thing that would improve this setup is being able to use the Controller & Note presentation mode.
Anyone have an idea what I am doing wrong? .I can project the screen when the dongle is connected with HDMI, but when I connect with an HDMI to VGA converter the Allshate Cast automatically shuts down and the Note restarts.
Anyone have an idea what I am doing wrong? .I can project the screen when the dongle is connected with HDMI, but when I connect with an HDMI to VGA converter the Allshate Cast automatically shuts down and the Note restarts.
Click to expand...
Click to collapse
Did you figure this out? I would not like to make the dongle purchase if this is bound to happen....
did anyone manage to solve the display mirroring to PC software?
I found another way to get very good results in mirroring wirelessly from Note to PC: Teamviewer. Download the free app from the play market, and also the free PC client from the Teamviewer website. A tad laggy, but works well for presentations.
please
[LIST said:
[*]buy HDMI to VGA adapter
Click to expand...
Click to collapse
could tell me please the type of hdmi to vga adapter exactly with the manufacturing code, there is a lot of staff on the market and I am pretty sure not all of them are working, thanks
I just got the dongle. It works great!
A few comments:
(1) For rooted device (like mine), the app "triangle away" is needed. The dongle works after (but not before) I reset the counting using triangle away. For un-rooted devices (the device is un-rooted if you didn't root it yourself) it shouldn't be an issue.
(2) The dongle works with a hdmi-VGA converter. The one I bought is this:
http://www.amazon.co.uk/Cable-Matte...7O2U/ref=sr_1_1?ie=UTF8&qid=1358947513&sr=8-1
I am sure lots of other converters should work as well. But there may be two things to note. It would be safer if
(a) "Active" converters should have more chance to work than "passive" converters. There is an IC chip in active converters. The passive ones are just data lines.
(b) Make sure the converter does not need too much power to work. The one I bought is raspberry PI compatible. This typically mean the converter the current it draws from the device is not too large. In some previous post it is mentioned the dongle could reset when connected to VGA converters. I doubt it may because of too much power required by the converter.
(3) I didn't notice any lag or instability issues with 30 minutes of use (I installed a firmware update before usage. The discovery of update and installation is automatic. I just clicked OK).
I didn't (and will not) use it to play games or watch movies anyway. I only want to use it to do presentations via projectors. Games and movies transfers much more data, in which case I haven't tested.
I will update if I got problems using the dongle for a longer time.
(4) The "multi-window app" feature goes away when the dongle is connected. (It re-appears after disconnection.)
UPDATE:
After more test, there do exist a few problems:
(1) If I play a video in full screen (both youtube video online or downloaded videos using MXplayer), the video is only shown on external display. Even worse, when I exit the full screen mode of the video player, the allshare connection typically crashes. I need to go to settings to connect again (no reboot needed though).
On the other hand, for youtube without going to full screen, there is no problem. And when I compare the two displays, there is no lag between them.
(2) In polaris office, only the "primary display" mode works well. In other two modes, the external screen only update partially.
Both of them should be software problems. If I don't do (1) of the above, I never met crash or disconnections. I didn't test the device with games. There is no random disconnection so far (this is most important for me).
The connection is stable within 10 meters, while it breaks at about 30 meters (together with 2 doors blocking the space).
Finally, there is a drop of display quantity if the image is quickly changing, and I watch closely enough. But considering I only need to display static images, this is not a problem. The display quantity of static images is great. Compared with the TeamViewer + computer solution, the dongle uses less resources on the tablet and gives much better image quality. The usage of battery is not heavily affected either. I used in total 7% battery power per hour for light usage of the tablet with dongle connection (and among which the tablet screen still used most of battery as usual).
I just thought I should share this, since the VR Headset has extremely limited functionality through the phone.
There is a dongle available from a company in South Korea that enables PC use (for movies and Youtube) specifically for the 360 VR. It basically converts HDMI output from your graphics card to USB-C and also has a micro-USB secondary connection for controls.
The name of the tool is Vagle VRD-1000 VR Data Transformer. I was able to get one from the US Amazon this week and waiting for it to arrive and test.
The price was not prohibitive compared to HDMI to USB-C capture boxes that run for a few hundred bucks and it seems tailor made for the LG 360 VR.
Cheers
I'm curious to know how this works out for you. Considering you can grab an LG360 VR google set for under $100, would be a fun addition to play with.
And it works
wilvelas said:
I'm curious to know how this works out for you. Considering you can grab an LG360 VR google set for under $100, would be a fun addition to play with.
Click to expand...
Click to collapse
I've received the adapter this week. It works as advertised for playing individual VR video files and Youtube VR streams. I had to download the VR Player from the manufacturer's website and it appears like a modified version of CodePlex VR Player. It includes a device preset for the LG headset. It also installed the K-lite codec pack and VLC automatically.
Head tracking works, video was a bit jittery as I could only test it on my laptop under W10 with an Intel IGP. The manual specifies Intel Graphics are not recommended. My desktop is sitting waiting for memory modules and I will test again once fixed.
One thing to note - as I connected the glasses through the adapter Windows set them up as a second monitor at their native resolution however I couldn't see anything. The glasses only fired up as I've opened the VR Player. However, after closing the player, the glasses still showed the desktop, but it was rotated by 90 degrees. I will try to rotate the desktop on my PC and see if I can have the picture laid out properly. If it works, it might allow me to play my flight sim on the headset.
Long story short, if you want to watch VR videos on the computer, the dongle will work. I've got the LG 360 VR for $60 off ebay and ended up spending more for the dongle ($90). All together it came down to less than a brand new LG 360 VR bought from LG.
whereto download this vr player?
hi Rothas, I tried to plug lv 360 directly into my NUC which has usb-c (thunderbolt 3, compatible with displayport over usb c), it recognizes it as a display 1440*960. but like you said below, nothing is shown on the goggle. want to try this vr player - you said you had to download from manufacturer's website? can't find the website even , can you help?
thanks
Wei
rothas said:
I've received the adapter this week. It works as advertised for playing individual VR video files and Youtube VR streams. I had to download the VR Player from the manufacturer's website and it appears like a modified version of CodePlex VR Player. It includes a device preset for the LG headset. It also installed the K-lite codec pack and VLC automatically.
Head tracking works, video was a bit jittery as I could only test it on my laptop under W10 with an Intel IGP. The manual specifies Intel Graphics are not recommended. My desktop is sitting waiting for memory modules and I will test again once fixed.
One thing to note - as I connected the glasses through the adapter Windows set them up as a second monitor at their native resolution however I couldn't see anything. The glasses only fired up as I've opened the VR Player. However, after closing the player, the glasses still showed the desktop, but it was rotated by 90 degrees. I will try to rotate the desktop on my PC and see if I can have the picture laid out properly. If it works, it might allow me to play my flight sim on the headset.
Long story short, if you want to watch VR videos on the computer, the dongle will work. I've got the LG 360 VR for $60 off ebay and ended up spending more for the dongle ($90). All together it came down to less than a brand new LG 360 VR bought from LG.
Click to expand...
Click to collapse
---------- Post added at 02:46 PM ---------- Previous post was at 02:40 PM ----------
https://drive.google.com/drive/folders/0B0LTVBpzZVOLRkx4NEhrelR5RE0
alanma75 said:
hi Rothas, I tried to plug lv 360 directly into my NUC which has usb-c (thunderbolt 3, compatible with displayport over usb c), it recognizes it as a display 1440*960. but like you said below, nothing is shown on the goggle. want to try this vr player - you said you had to download from manufacturer's website? can't find the website even , can you help?
thanks
Wei
Click to expand...
Click to collapse
VR Player
Good to see you found it, could you let us know if it works on the NUC without the dongle?
Also, make sure you select the LG device in the player, that is what brings the picture up on my headset. Thanks.
It worked !!!
wow, good news everyone, this really rocks: get LG 360 plug in to a displayport over usb c compatible computer (NUC 7th gen for example).
and fires up this vr player - so far the image are 90 degree turned - I am so excited so need to share the news first. will tweak more and let you guys know.
rothas said:
Good to see you found it, could you let us know if it works on the NUC without the dongle?
Also, make sure you select the LG device in the player, that is what brings the picture up on my headset. Thanks.
Click to expand...
Click to collapse
---------- Post added at 06:15 PM ---------- Previous post was at 05:53 PM ----------
everything works inside vr player once the tracker is set to LG ER1 - I guess it tells VR player to align the orientation from the goggle.
can't seems to get it to work directly - it shows the screen but are 90 degree turned, one clock wise and the other eye counter clockwise, so you can't even change alignment in display setting to fix both eyes
overall I am very happy, just saved $100 on this Vagle if your computer is able to output displayport over USB C directly - it works exactly as the adapter does.
thanks Rothas for this great finding, I wouldn't even think it is possible if I did not read your post.
alanma75 said:
wow, good news everyone, this really rocks: get LG 360 plug in to a displayport over usb c compatible computer (NUC 7th gen for example).
and fires up this vr player - so far the image are 90 degree turned - I am so excited so need to share the news first. will tweak more and let you guys know.
Click to expand...
Click to collapse
Great
Oh, I forgot to mention to load up the .json preset included with the player, it does something to the viewing plane.
I still haven't tested rotating the display in W10 due to lack of time, I'll post something once I'm done.
I wish I could've saved the $100 but my desktop doesn't have native USB-C :laugh:
Installed the player and it sort of works. I get the 90" rotated display in the player. Unfortunately my windows doesn't see the glasses driver.Any ideas?
I was able to get my hands on a R100 VR headset for a real bargain.
To get it to work in my use case (As FPV glasses for my racing drone) I need help from someone owning the VRD-1000 "transformer":
Could someone owning said converter please open it up and take pictures of both sides of the PCB? I want to gather some information on the SLIMPORT chipset they used so I can hack together my own adapter.
I am not able to purchase the VRD-1000 it here in europe and importing it would cost me over 200 USD which is quite a bummer
Help would be greatly appreciated! Of course Ill share my findings if this leads to something!
VRD-1000
game-genie said:
I was able to get my hands on a R100 VR headset for a real bargain.
To get it to work in my use case (As FPV glasses for my racing drone) I need help from someone owning the VRD-1000 "transformer":
Could someone owning said converter please open it up and take pictures of both sides of the PCB? I want to gather some information on the SLIMPORT chipset they used so I can hack together my own adapter.
I am not able to purchase the VRD-1000 it here in europe and importing it would cost me over 200 USD which is quite a bummer
Help would be greatly appreciated! Of course Ill share my findings if this leads to something!
Click to expand...
Click to collapse
Will PM you tonight
rothas said:
Will PM you tonight
Click to expand...
Click to collapse
You are my hero!
I'll update ASAP with my findings
There was a question about components used in that Data Transformer dongle. It's not a direct answer, but the following press note lists the components used in LG G5 phone and in glasses themselves (google for the following title):
"Analogix and LG Take Mobile VR to the Next Level with LG 360 VR"
The components are:
LG G5: SlimPort ANX7816 transmitter and ANX7418 USB-C switch and controller;
LG 360 VR: SlimPort ANX7737 converter and ANX7402 USB-C controller.
I have a question to alanma75. What happens when you plug LG glasses to your NUC, without starting that VR prlayer? What do you need to do to force the glasses to show anything?
I have access to one Win7 and one Win10 laptops with USB-C interface. When I connect glasses to them, laptops recognize an external display of 1440x960 resolution, I can extend the desktop to that space, I can drag the windows there, but the glasses remain dark. For a moment I thought that simply there is no back-light triggered, but I don't see any activity on those LCD pa panels (yes, I unscrewed the lenses to look directly at LCDs). What needs to be done to kick-start the goggles?
Just picked up one of these headsets for $20, B&H photo has them refurb for that right now. Have had my eyes on these to try and hack and mod a bit.
But reading over the info, it's gonna be a tough one, maybe not really worth it.
The Vagle VRD-1000 is pretty interesting, this PDF has some interesting details about what it does internally:
http://tvlogic.tv/VR/vagle(VRD-1000) Product Profile_v1.0(ENG).pdf
Interesting parts: I see HDMI to Display Port and DDC. DDC appears to be "Display Data Channel" which is an i2c protocol. See here for some info on that and how that fits in to USB - C https://www.mouser.com/applications/usb-type-c-adds-hdmi/
Perhaps DDC is used to instruct the goggles how to display - for instance it's been mentioned of people getting images, but 90 degrees rotation? Perhaps DDC is used to instruct the goggle how to orient the image, etc.
Then also I see mentioned "Coordination info" this is probably motion tracking info I'm guessing. Personally I'm not as interested in this aspect, I'm more interested in just being able to control the displays, maybe get general HDMI input working.
Here is an interesting github project that appears to be using or attempting to use the VRD-1000 along with this headset https://github.com/TrueOpenVR
How about an adapter Type C to USB 3.0, somebody tried, it works?
The code for get orientation data from USB сan be found after decompiled "Vr Player.Trackers.LgeR1360Tracker.dll" (C#, decompiled without problems with using ILSpy). File "Vr Player.Trackers.LgeR1360Tracker.dll is located in the player folder [1][2]
There can do support for SteamVR and other vr programs.
snap3D, it is probably necessary to send the packet over USB to enable it. LG G5 (or Vagle VRD-1000) most likely sends a special package to turn on the displays. Probably it's done so people do not try to connect to the PC. Need to capture the usb packet (from Vagle).
I also have G5 phone (and obviously VR360 glasses light up when LG app is running and glasses proximity sensor is covered; glasses immediately turn off when proximity sensor is uncovered), but unfortunately no access to USB-C analyzers. It would be interesting to see if the glasses connected to PC (via Vagle adapter or directly through USB-C interface) can continue to show the image after initial packet trigger. To test that theory I ordered a "MeeGoPad T09" micro computer (for $130 from "geekbuying" Asian site), which is less than $10 more expensive than the Vagle adapter (and as a bonus I'll have a tiny PC running Win10 OS; you can go even smaller with PC-stick "MeeGoPad T08"; both MeeGoPads have USB-C interface). I'll try to install that proprietary VR player s/w (link provided earlier in this thread) on MeeGoPad and we will see what happens.
5casper5 said:
snap3D, it is probably necessary to send the packet over USB to enable it. LG G5 (or Vagle VRD-1000) most likely sends a special package to turn on the displays. Probably it's done so people do not try to connect to the PC. Need to capture the usb packet (from Vagle).
Click to expand...
Click to collapse
I think that "USB Packet" might actually be an i2c packet over a wire that's a part of the USB C spec. The DDC "Display Data Channel" signal I mentioned before. So might be easier to reverse engineer than a USB packet would.
del
So I took my goggles apart just to look around inside. Noticed these test pads on the main PCB, labelled GND, 5V, D-, D+ and B. So that looks like USB to me, but not sure what B is. These might just be some kind of ISP firmware update pads or something though. I might try to solder a USB A cable to them, plug it in to my computer and see what happens. Also here's a picture of the back side of the board just for info. Let me know if anyone wants a picture of something specific.
0TheRain0, yes, I wonder what will happen.
Does my $75 solution work better LG G4 with the Oneplus loop VR?
Hi everyone,
I have this old (5-year-old) 21" BenQ monitor lying around the house, gathering dust and cobwebs, and I'd like to put it to a good use as a makeshift workstation, but I don't want to invest in PC central unit, not even a barebone one.
The monitor has an HDMI port and two USB 2.0 ports, so I was wondering if an Android TV stick like this one (hope the link translates to your country, mine is in French, sorry) can be used to power it, provided I'm not looking for something too powerful, just a way to surf the Web and occasionally watch videos (no gaming of any kind).
Keyboard and mouse would be Bluetooth, of course, and I don't much care about storage, since I can use an external HDD via one of the monitor's USB ports (done that in the past when I was using it as a extra television).
So, what do you think? Is it doable, and can I just plain forget it?
I really want to buy a rootable android and Pixels seem to be the way to go. However, I'm reading conflicting info about whether or not I'll be able to use 1-2 external monitors with the Pixel 7 Pro. I hoped this wouldn't be necessary.
I'd really like to replace my laptop with a phone that's capable to using 1-2x external monitors (4k resolution not necessary but would be amazing as well - 1080p would be plenty).
From what I see, using a displayport dock via USB-C can enable at least 1 HDMI output:
Project your Pixel phone's screen - Pixel Phone Help
If you have a Chromecast or other device that casts, you can mirror your Pixel phone's screen and audio on
support.google.com
>Tip: Pixel 3 and later Pixel phones work with the MediaGear USB-C Hub Docking Station (item 853265008171). Other docking stations can also work.
Can someone please confirm this is possible and let me know which dock they're using? Also, is there any chance I could use 2 HDMI outputs through the same dock? Or perhaps one USBC-Displayport-HDMI connection + 1 Chromecast connection to enable 2x monitors?
I'd love to be able to code using a bluetooth keyboard/mouse and skip having the carry my laptop around entirely. I have a 1440p portable/external monitor that works wonderfully for both my laptop and my LG V50 ThinQ.
2x monitors would be my dream; the portable external monitor I have is amazingly light and works great (and supports display over USBC and MicroHDMI - plus power over another USBC port). So I'm sure I'd need to plug in in order to operate these for any extended periods but anyway:
Does anyone have experience with this they can share?
Thanks for any/all help. I'm a dev myself so if the solution to this is a custom rom, I'd be happy to contribute to the solution if anyone's working on one.
I will say: My LG V50 ThinQ USBC to USBC video works really well on my portable monitor... So it may be possible to patch that feature into a pixel kernel.
I will definitely look into it once I have the time, if no one else has any hints/progress on the subject.
I will say "technically"... yes. Practically however, nobody has actually bothered.
Should be just a matter of making sure the kernel is built with support for GUD and setting up a monitor with a GUD interface (such as an rPi with the GUD sdcard).
Pixels do not support native, hardware-accelerated video-out.
Any old dock won't work. Only DisplayLink ones and expect performance to be poor.
LLStarks said:
Pixels do not support native, hardware-accelerated video-out.
Any old dock won't work. Only DisplayLink ones and expect performance to be poor.
Click to expand...
Click to collapse
Not to mention, streaming like Netflix and Hulu won't show. I tried several DisplayLink adapters which claimed HDCP compliance (including this one:
https://www.amazon.com/gp/aw/d/B072FHTZ8V
with the DL6950 chip:
https://www.synaptics.com/products/displaylink-graphics/integrated-chipsets/dl-6000 )
But I could never get any streaming services to work (just black screen once playing started). The rest was acceptable quality (although I wouldn't expect to be able to play games without significant lag and screen tearing). If you find a set up that also works with streaming, please let me know. I'd be very interested in adopting something similar.
***Edit: from DisplayLink's site:
"As the DisplayLink is an app from the Play Store, Android prevents any protected content from video streaming services eg Netflix, Amazon etc, being available to the DisplayLink app. This is an Android restriction to make sure that protected content remains protected and is not available to other applications."
Known issues and limitations with DisplayLink for Android – DisplayLink Support
support.displaylink.com
Maybe there is a root workaround, I don't know.
Didn't even know that. Wow.
I still don't forgive Google for removing Miracast.
I really do like Google Cast but that was really anti-consumer.