Hi,
I tested microHDMI cable today and connected pad to the HDTV. Works amazingly well. Surprised.
I was watching picture gallery, a HD movie and just took a quick 10 minute test.
I wonder what could be other practical things and what this could be used for:
- presentations
- music, of course
- games? how?
I have a problem with a fact that when the screen goes off - tablet is locked - movies stop playing.
This means the screen of pad must be always "on". So you basically have two screens. Not practical. Any workaround?
Same goes for games. I noticed i still have to look at the tablet to know where to press on the screen, so except when using the game controller and screen on....it is not possible to play on TV.
Am I correct? Any practical ideas? What can we use HDMI for.
My cable is also ethernet capable, which i didn't even know it exists. What about that? How to use that?
Sorry, many questions
Svashtar said:
Same goes for games. I noticed i still have to look at the tablet to know where to press on the screen, so except when using the game controller and screen on....it is not possible to play on TV.
Click to expand...
Click to collapse
A gamepad/controller will solve that issue. I agree that using the tablet for input and TV for displaying the output is not ideal
I've used the tablet with a micro-HDMI cable and BSPlayer with great results. It supports LAN mode (SBM/Windows file sharing), and can stream directly from RAR archives. Great for watching TV shows, etc for those of us who can't get Netflix, Hulu and so on.
My cable is also ethernet capable, which i didn't even know it exists. What about that? How to use that?
Click to expand...
Click to collapse
This is a feature added in the HDMI 1.4 specification. It basically throws in a full duplex 100 Mbps Ethernet link alongside everything else going through the cable. It needs to be supported by both ends, and is mostly for TVs, receivers, etc. As far as I know, the TF700 does not support it, I'd be surprised if it did.
The cable is just transporting the signal, but manufacturers (and especially eBay sellers) love putting on features like that on HDMI cables. "3D support! Ethernet support! Will get you laid!" and so on
(More on HDMI 1.4, as well as version comparisons: http://en.wikipedia.org/wiki/HDMI#Version_1.4)
I know at least for my phone...I never really use it for anything more than playing a couple games with a controller, watching a video, or viewing photos. Maybe browsing the web, but not really. Emulators are the best, I love being able to play a little Super Smash Bros or Zelda: OoT on my TV via my phone (and tablet).
Svashtar said:
I have a problem with a fact that when the screen goes off - tablet is locked - movies stop playing.
This means the screen of pad must be always "on". So you basically have two screens. Not practical. Any workaround?
Click to expand...
Click to collapse
Dice Player has a Background playback.
You could hook up a PS3 controller and play some games like Shadowgun and GTA3 without having to root your device for the SixAxis app.
Sent from my HTC Sensation using Tapatalk 2
Related
So I rented a movie using the new Movies tab on my Transformer. I plugged in the HDMI out to my big TV and everything seemed to work fine, launcher showing and everything.
When I tried to play the movie the screen went black on both the transformer and the TV, but the sound still played from the movie over the TV speakers. If I unplug the HDMI cable the movie instantly works on the Transformer.
Are we not able to push Google Movies out of the HDMI port ? Maybe I just have a bad cable ? Everything else works fine though.
Anyone else have this issue ?
Download a test MP4 file from somewhere and try.
HDMI protocol implementation
I think its due to differences between HDMI protocol implementation on the devices on both sides of the cable. It happened a lot with other devices like HMDI out on ATI graphics cards and certain audio/video receivers like Yamaha. Also, early HDMI 1.3x specification was not implemented correctly on many devices...
I'm afraid its the same case with the Transformer and certain TV's. Some people report HDMI-out works on Samsung's...others have problem with Sony's...
The real problem is...where's the fault...should TV makers update their firmware (lot of newer TV's can be upgraded!) or should Asus update their Transformer firmware for more compatibility with peer devices?
Don't have an MP4 on hand, not a big recording/movie buff.
It doesn't work on either of my computer monitors either
I have the same problem. I have several mp4 movies that I've encoded myself and they all play just fine. This is a problem with the Videos app, and not the Transformer or the TV.
My apologies if this is somewhere else here. I'm using a T-Mobile One S that is unlocked and rooted. I know that I can buy the Medialink from HTC and plug it into the TV. Is there another way that o can do this?
And since I'm asking, would I also be able to watch home videos shot drum from the phone this way too? Any help or pointing me in the right direction would be appreciated.
Thanks
Marc
Sent from my HTC VLE_U using xda premium
If your TV supports DLNA you can just play it directly from the device. I've only tried to view some photos I've taken, but find it very slow when buffering og switching between pictures. They were approximately 2 MB big, but it took about 10-15 sec for each one to load...
cawith said:
If your TV supports DLNA you can just play it directly from the device. I've only tried to view some photos I've taken, but find it very slow when buffering og switching between pictures. They were approximately 2 MB big, but it took about 10-15 sec for each one to load...
Click to expand...
Click to collapse
Can you tell us dummies how to do that, is there a built in app, or do you use one from the Market?
DownloaderZ said:
Can you tell us dummies how to do that, is there a built in app, or do you use one from the Market?
Click to expand...
Click to collapse
DLNA support is built in. In the Gallery app, locate the image or video you want to play, tap the "More" button and choose "Select player".
To use this function, both your DLNA-enabled TV and phone must be connected to the same network and your TV must have support for the codecs used by the media you are trying to play.
The HTC One S also supports MHL (HDMI out through the USB socket), so if you're looking for a wired solution or your TV is not DLNA-enabled, just pick up a MHL-HDMI cable from your favorite electronics retailer.
This is what you're after:
http://www.amazon.co.uk/Kitvision-M...3?s=electronics&ie=UTF8&qid=1336495712&sr=1-3
Got one, works great. Can even play my games on the TV.
In the US, I use monoprice.com, they have the adapter also.
Yup should be fine, you just want a MHL adaptor. Basically works like an HDMI out on your PC so you can do everything you do on your phone on the screen of your TV. Not experienced any lag as yet and doesn't require any tricky set up.
Souelle said:
DLNA support is built in. In the Gallery app, locate the image or video you want to play, tap the "More" button and choose "Select player".
To use this function, both your DLNA-enabled TV and phone must be connected to the same network and your TV must have support for the codecs used by the media you are trying to play.
The HTC One S also supports MHL (HDMI out through the USB socket), so if you're looking for a wired solution or your TV is not DLNA-enabled, just pick up a MHL-HDMI cable from your favorite electronics retailer.
Click to expand...
Click to collapse
excellent, thank you
Thanks for the responses everyone. I appreciate quick replies!
Marc
Well, after the OTA update, the DLNA speed has improved a lot!
But are you guys able to stream videos, that you've recorded on your phone? Mine gives me an error (714)...
I ended up with the note after replacing my tf101 with the tf300 and tested the note and loved it in every way.
I'm not really even missing the keyboard dock and finding many ways to use the spen on a regular basis.
What I'd love though is to basically use the note as a digital whiteboard for teaching. Essentially to be able to write in smote or quill while sending the screen display over wifi to the PC connected to the projector system. Is there any way to do this? To do a live screencast from the note to a PC?
Sent from my MB855 using Tapatalk 2
jeggen said:
I ended up with the note after replacing my tf101 with the tf300 and tested the note and loved it in every way.
I'm not really even missing the keyboard dock and finding many ways to use the spen on a regular basis.
What I'd love though is to basically use the note as a digital whiteboard for teaching. Essentially to be able to write in smote or quill while sending the screen display over wifi to the PC connected to the projector system. Is there any way to do this? To do a live screencast from the note to a PC?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
AllShare?
ljcook said:
AllShare?
Click to expand...
Click to collapse
Have had zero luck even getting it to connect. PC install didn't work at work, tried at home and apparently needed to let it restart and then install all over. Still cannot connect the device though, device always scans when I turn on AllShare cat in network and Allshare on the PC recognizes an "intel" device. Thought for sure the Note would appear there.
Any tips on how to use it?
Does it actually do this? I gave up on it because what I see on Samsung's website only talks about sharing music/video and I didn't see any mention of streaming the tablet display to the PC. (Except the idea that you could watch a game on the PC, but see nothing about this in the app itself.)
jeggen said:
Have had zero luck even getting it to connect. PC install didn't work at work, tried at home and apparently needed to let it restart and then install all over. Still cannot connect the device though, device always scans when I turn on AllShare cat in network and Allshare on the PC recognizes an "intel" device. Thought for sure the Note would appear there.
Any tips on how to use it?
Does it actually do this? I gave up on it because what I see on Samsung's website only talks about sharing music/video and I didn't see any mention of streaming the tablet display to the PC. (Except the idea that you could watch a game on the PC, but see nothing about this in the app itself.)
Click to expand...
Click to collapse
Were you able to figure this out? I'm a teacher as well and do things with my HP tablet, but really want to with many Note.
You can execute AllShare through Samsung Kies, as well.
My suggestion would be to try and look at Remotes. You may be able to find drawing input ones. I use Unified Remote for using my phone/tablet as an input device. Although, the free version is limited to about 13 remotes or so. With the pro version you get it up in it's 50's. I'm not sure if this has what you're looking for but you can make your own custom remotes.
Or, alternatively, you can use a Remote Desktop client. Some of these may adjust your screen resolution on the PC so it fits well in the Note 10, but you can easily change it back. But it'll effect the view on the tablet. For this, I use Splashtop 2 HD.
zaslamel42 said:
You can execute AllShare through Samsung Kies, as well.
My suggestion would be to try and look at Remotes. You may be able to find drawing input ones. I use Unified Remote for using my phone/tablet as an input device. Although, the free version is limited to about 13 remotes or so. With the pro version you get it up in it's 50's. I'm not sure if this has what you're looking for but you can make your own custom remotes.
Or, alternatively, you can use a Remote Desktop client. Some of these may adjust your screen resolution on the PC so it fits well in the Note 10, but you can easily change it back. But it'll effect the view on the tablet. For this, I use Splashtop 2 HD.
Click to expand...
Click to collapse
What is Samsung Kies and what is Remotes?
I've done some investigating and I think the only way that AllShare works to screencast to another device is to send it to an AllShare Play device. Unfortunately I don't think (but really hope I'm wrong) the PC software works this way.
I'm curious, has anyone tried the VNC Server for Android and tried connecting in a view mode on a PC?
https://play.google.com/store/apps/...lt#?t=W251bGwsMSwyLDEsIm9yZy5vbmFpcHMudm5jIl0.
perhaps this is what you are looking for?
https://play.google.com/store/apps/details?id=com.splashtop.remote.WHITEBOARD&feature=nav_result#?t=W251bGwsMSwyLDNd
Working Solution
jeggen said:
I ended up with the note after replacing my tf101 with the tf300 and tested the note and loved it in every way.
I'm not really even missing the keyboard dock and finding many ways to use the spen on a regular basis.
What I'd love though is to basically use the note as a digital whiteboard for teaching. Essentially to be able to write in smote or quill while sending the screen display over wifi to the PC connected to the projector system. Is there any way to do this? To do a live screencast from the note to a PC?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
This is the setup I use and would suggest to everone in need to present from Galaxy Note 10.1:
buy Allshare Cast dongle , search for it on Amazon
buy HDMI to VGA adapter
connect HDMI to VGA adapter to projector and Allshare to A/C
on Note 10.1, Settings/More Settings/AllShareCast, the dongle will be detected something like "Dongle-xxxxx", tap to connect
When connected, start to present, wireless, move in the room, take the S-Pen and highlight the important topics etc.
On that way, no hassles with connection to PC/laptop and then to projector. AND the coolness factor is priceless! Every time I present there is a WOW factor, the downturn is sometimes people are not listening to my presentation but wants to see the technology.
And the Apple fanboys in the meetings around with their iPads - can you imagine several of them told me "nah, that is PROPRIETARY technology" !? LOL! I was very respectful before to other people opinions and personally I am very thankful to the genius work of Steve Jobs but in recent time I simple shoot back very sharp - face it, Apple funboy!
wolfindersteppe said:
This is the setup I use and would suggest to everone in need to present from Galaxy Note 10.1:
buy Allshare Cast dongle , search for it on Amazon
buy HDMI to VGA adapter
connect HDMI to VGA adapter to projector and Allshare to A/C
on Note 10.1, Settings/More Settings/AllShareCast, the dongle will be detected something like "Dongle-xxxxx", tap to connect
When connected, start to present, wireless, move in the room, take the S-Pen and highlight the important topics etc.
On that way, no hassles with connection to PC/laptop and then to projector. AND the coolness factor is priceless! Every time I present there is a WOW factor, the downturn is sometimes people are not listening to my presentation but wants to see the technology.
And the Apple fanboys in the meetings around with their iPads - can you imagine several of them told me "nah, that is PROPRIETARY technology" !? LOL! I was very respectful before to other people opinions and personally I am very thankful to the genius work of Steve Jobs but in recent time I simple shoot back very sharp - face it, Apple funboy!
Click to expand...
Click to collapse
Is thi similar to AppleTV and Airplay? Does it mirror everything at all times or only certain apps? Thanks for your help!!!
shrek4224 said:
Is thi similar to AppleTV and Airplay? Does it mirror everything at all times or only certain apps? Thanks for your help!!!
Click to expand...
Click to collapse
I don not own any Apple product and cannot say anything about it.
Everything what you can see on your Note 10.1 screen you are seeing parallel on the second display. I have tested it with several projectors from Dell, Sony, signal to those devices over their VGA ports and the experience is exactly the same to one with the laptop connected to the projector. The best result is via HDMI port, majority of the business projectors do not have one but monitors and TV have them and the result is gorgeous, beside the screen the audio is transferred too.
The video player is optimized for the AllShare Cast, when playing you can see the video on the second screen and on Note 10.1 you have the control menu.
Polaris office works fine too, same experience, WYSIWYG on both screens. For slides (aka PowerPoint), when connected to AllShare Cast dongle, the slide show button clicked shows the selection of
Primary display
Dual monitor
Controller & Note
but only the Primary display selection switches to presenter mode. Even then, the pen modes is active so you can annotate with S-Pen direct on the slides during the presentation, the killing feature for me.
Small downturn - multiscreen is not working when connected to Allshare Cast dongle, only single screens, but the floating helicopter videos is working and that is impressive for entertaining the people after the work is done :fingers-crossed:.
wolfindersteppe said:
I don not own any Apple product and cannot say anything about it.
Everything what you can see on your Note 10.1 screen you are seeing parallel on the second display. I have tested it with several projectors from Dell, Sony, signal to those devices over their VGA ports and the experience is exactly the same to one with the laptop connected to the projector. The best result is via HDMI port, majority of the business projectors do not have one but monitors and TV have them and the result is gorgeous, beside the screen the audio is transferred too.
The video player is optimized for the AllShare Cast, when playing you can see the video on the second screen and on Note 10.1 you have the control menu.
Polaris office works fine too, same experience, WYSIWYG on both screens. For slides (aka PowerPoint), when connected to AllShare Cast dongle, the slide show button clicked shows the selection of
Primary display
Dual monitor
Controller & Note
but only the Primary display selection switches to presenter mode. Even then, the pen modes is active so you can annotate with S-Pen direct on the slides during the presentation, the killing feature for me.
Small downturn - multiscreen is not working when connected to Allshare Cast dongle, only single screens, but the floating helicopter videos is working and that is impressive for entertaining the people after the work is done :fingers-crossed:.
Click to expand...
Click to collapse
That sounds amazing. I'd love to see a video of it all in action. Sounds great, especially being able to run a presentation and markup with the pen, but would like to see it before dropping about $100 on the setup.
I've been testing splashtop whiteboard but have had problems getting it to connect. Sometimes it will.... sometimes it won't. Would prefer to just screencast and run everything from the tablet anyway. The presentation mode sounds impressive and ability to swith into Sketchbook or snotes would be great.
Sent from my MB855 using Tapatalk 2
wolfindersteppe said:
I don not own any Apple product and cannot say anything about it.
Everything what you can see on your Note 10.1 screen you are seeing parallel on the second display. I have tested it with several projectors from Dell, Sony, signal to those devices over their VGA ports and the experience is exactly the same to one with the laptop connected to the projector. The best result is via HDMI port, majority of the business projectors do not have one but monitors and TV have them and the result is gorgeous, beside the screen the audio is transferred too.
The video player is optimized for the AllShare Cast, when playing you can see the video on the second screen and on Note 10.1 you have the control menu.
Polaris office works fine too, same experience, WYSIWYG on both screens. For slides (aka PowerPoint), when connected to AllShare Cast dongle, the slide show button clicked shows the selection of
Primary display
Dual monitor
Controller & Note
but only the Primary display selection switches to presenter mode. Even then, the pen modes is active so you can annotate with S-Pen direct on the slides during the presentation, the killing feature for me.
Small downturn - multiscreen is not working when connected to Allshare Cast dongle, only single screens, but the floating helicopter videos is working and that is impressive for entertaining the people after the work is done :fingers-crossed:.
Click to expand...
Click to collapse
First off thank you for your help and input. My school is going to purchase this for me but I have one additional question. We do not have HDMI projectors in our building. I was wondering if an HDMI-VGA adapter would work? It will not provide true 1080P but that is a non-issue for me. I only want to be able to project the S-Note or any note app so my students can take notes on what I am writing. Again thank you for your help.
shrek4224 said:
First off thank you for your help and input. My school is going to purchase this for me but I have one additional question. We do not have HDMI projectors in our building. I was wondering if an HDMI-VGA adapter would work? It will not provide true 1080P but that is a non-issue for me. I only want to be able to project the S-Note or any note app so my students can take notes on what I am writing. Again thank you for your help.
Click to expand...
Click to collapse
I use Gold Plated Premium HDMI to VGA Active M/F Adapter in White by Cable Matters (still cannot post links, just search for it on amazon) and it works, tested on several company's Dell and Sony projectors with VGA port.
FYI - I filed a support ticket with Polaris Office about not being able to use the different display modes. This was their response.
Dear customer,
Thank you for the inquiry.
We knew this issue already, we’re working on it now.
We’ll try hard to figure out the issue and let you know as soon as we’ve got the solution.
Please be patient and understand about it.
We will try hard to repay you for all your kindness.
Thanks for your interest.
Polaris Office CS Team
Click to expand...
Click to collapse
Hopefully they have a solution soon. The only thing that would improve this setup is being able to use the Controller & Note presentation mode.
Anyone have an idea what I am doing wrong? .I can project the screen when the dongle is connected with HDMI, but when I connect with an HDMI to VGA converter the Allshate Cast automatically shuts down and the Note restarts.
Anyone have an idea what I am doing wrong? .I can project the screen when the dongle is connected with HDMI, but when I connect with an HDMI to VGA converter the Allshate Cast automatically shuts down and the Note restarts.
Click to expand...
Click to collapse
Did you figure this out? I would not like to make the dongle purchase if this is bound to happen....
did anyone manage to solve the display mirroring to PC software?
I found another way to get very good results in mirroring wirelessly from Note to PC: Teamviewer. Download the free app from the play market, and also the free PC client from the Teamviewer website. A tad laggy, but works well for presentations.
please
[LIST said:
[*]buy HDMI to VGA adapter
Click to expand...
Click to collapse
could tell me please the type of hdmi to vga adapter exactly with the manufacturing code, there is a lot of staff on the market and I am pretty sure not all of them are working, thanks
I just got the dongle. It works great!
A few comments:
(1) For rooted device (like mine), the app "triangle away" is needed. The dongle works after (but not before) I reset the counting using triangle away. For un-rooted devices (the device is un-rooted if you didn't root it yourself) it shouldn't be an issue.
(2) The dongle works with a hdmi-VGA converter. The one I bought is this:
http://www.amazon.co.uk/Cable-Matte...7O2U/ref=sr_1_1?ie=UTF8&qid=1358947513&sr=8-1
I am sure lots of other converters should work as well. But there may be two things to note. It would be safer if
(a) "Active" converters should have more chance to work than "passive" converters. There is an IC chip in active converters. The passive ones are just data lines.
(b) Make sure the converter does not need too much power to work. The one I bought is raspberry PI compatible. This typically mean the converter the current it draws from the device is not too large. In some previous post it is mentioned the dongle could reset when connected to VGA converters. I doubt it may because of too much power required by the converter.
(3) I didn't notice any lag or instability issues with 30 minutes of use (I installed a firmware update before usage. The discovery of update and installation is automatic. I just clicked OK).
I didn't (and will not) use it to play games or watch movies anyway. I only want to use it to do presentations via projectors. Games and movies transfers much more data, in which case I haven't tested.
I will update if I got problems using the dongle for a longer time.
(4) The "multi-window app" feature goes away when the dongle is connected. (It re-appears after disconnection.)
UPDATE:
After more test, there do exist a few problems:
(1) If I play a video in full screen (both youtube video online or downloaded videos using MXplayer), the video is only shown on external display. Even worse, when I exit the full screen mode of the video player, the allshare connection typically crashes. I need to go to settings to connect again (no reboot needed though).
On the other hand, for youtube without going to full screen, there is no problem. And when I compare the two displays, there is no lag between them.
(2) In polaris office, only the "primary display" mode works well. In other two modes, the external screen only update partially.
Both of them should be software problems. If I don't do (1) of the above, I never met crash or disconnections. I didn't test the device with games. There is no random disconnection so far (this is most important for me).
The connection is stable within 10 meters, while it breaks at about 30 meters (together with 2 doors blocking the space).
Finally, there is a drop of display quantity if the image is quickly changing, and I watch closely enough. But considering I only need to display static images, this is not a problem. The display quantity of static images is great. Compared with the TeamViewer + computer solution, the dongle uses less resources on the tablet and gives much better image quality. The usage of battery is not heavily affected either. I used in total 7% battery power per hour for light usage of the tablet with dongle connection (and among which the tablet screen still used most of battery as usual).
I've seen a lot of discussion on here that relates to this, but I can't find a direct answer to my specific question.
I have a Note 10.1 (8013 w/JB 4.1.2) and a Samsung TV that has "AllShare".
What I want to do, and don't seem to be able to, is have whatever is on my Note screen mirrored onto my TV screen. Specifically, I want to watch NetFlix and have the Netflix content (video and audio) come through my TV. From what I've read on here, I can do that using a Samsung AllShare Dongle - but then I can use the dongle to view my content on any TV with an HDMI input. (my TV has AllShare, but it has no other "apps" built in, so I can't just have the TV pull directly from NetFlix)
What I don't understand is why I would need an AllShare dongle when I have a Samsung TV with AllShare built in. Sure, if I'm trying to use a non-Samsung TV, but it seems like if the TV has "AllShare" built in, it wouldn't need a dongle in order to do what the dongle does.
So, the question is, is there a way to have my NetFlix player on my Note show its content on my Samsung TV that has AllShare?
FWIW, what I CAN do:
- start a video that is stored locally on my tablet and have it play it to the TV. It takes a few seconds to get started, but then my movie plays through the TV itself.
- use my laptop and run Windows Media Player and pick a video that is stored locally, and have it Play To the TV. That works just like it does when playing from my tablet.
- on the TV, I can go into the AllShare menu and it shows both of the laptops on my home network, but not my Note. I can click into either PC and watch movies, listen to music, or look at photos - anything that I have chosen to Share from that PC.
So, I also don't understand why I can use my Note to Play To the TV, but the TV doesn't "see" the Note. And, if I go into the AllShare settings on my Note, it searches and says No Devices Found. But, then it will let me Play To the TV from the Video Player.
At the end of the day, I don't really see what the point of AllShare is or the AllShare dongle. Before I bought an AllShare dongle, I would just buy a Roku or similar device for the same or less money.
Depending how old your samsung tv is depends whether you need the dongle or not. Mine is the UA55D7000LM model which was supposed to be supported but that has since been withdrawn. I had to get a dongle.
Contacted samsung and got no help, would've been less painful beating my brains out with a gold brick wrapped in a slice of lemon...
They claimed it should work and gave me a heap of suggestions, none of which worked, and then told me I was doing something wrong.... I was, I was doing what they said....
Now with the dongle it works fine BUT as it connects with wifi you can forget browsing the web or streaming stuff through 3g. It is only good for things already on the tab..
If your tv can connect to internet, just use 'bubble dlna'.
Sent from my GT-N8010 using xda app-developers app
But I want the screen mirroring as was supposed to be available... Using DLNA only allows video and pictures. I want to be able to do something on my note and have it mirrored on the TV...
I want the same thing, screen mirroring, but for the life of me cant get it to work, What's the point of Allshare cast?....I don't get it?....
The best I can get is an app called imediashare, but this still does not mirror the tab, but at least I can YouTube to the tv..
Folks does your tv have allshare play or allshare cast?
Allshare play is dlna
Allshare cast is mirroring.
Google for it... lots of threads with this info.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Mine just says allshare. It a UE46D7000......
I don't see why I have to buy a dongle? I have a Samsung tv with allshare installed on it....
I can use imediashare to throw some apps on the tv, so the function for mirroring should be there already?
Bot found anything via Google about mirroring yet?
Nope nothing. I have the 2011 ua55d7000lm. It also only says allshare.... As I said, when the Note was released my model was on the list for allshare mirroring... Haven't been successful so I got the dongle. Works fine....
But I shouldn't of needed it by all the info presented by samsung. It was one of the major reasons I bought the note... That and the phone capability....
Yep, I'm having the same probs, cant mirror, I've connected via WiFi direct, and on the tv in menu there's an option that says Samsung wireless link (swl), its connected but not idea how to use it. It's given me another ip address too for the link?
Do the newer 2013 Samsung tvs have an allshare cast app installed?
Same reason i bought the notę, for all the compatability reasons....suprise suprise Samsung been telling fibs again....wont be the 1st time though..... The old ue46d6000 series would not display 3D in HD even though they were advertised as doing so......I got an upgraded set the 7 series in the end, and some strange calls from solicitors saying they needed to speak to me.....no doubt to keep stum
Google sammygo.tv Excellent site for the Samsung tv range
ultramag69 said:
Nope nothing. I have the 2011 ua55d7000lm. It also only says allshare.... As I said, when the Note was released my model was on the list for allshare mirroring... Haven't been successful so I got the dongle. Works fine....
But I shouldn't of needed it by all the info presented by samsung. It was one of the major reasons I bought the note... That and the phone capability....
Click to expand...
Click to collapse
Understand what you mean.
Like you i just spent $50 to get the dongle. Now i have what works with any hdtv. Its better than spending $200+ for this feature alone on a small set of samsung TVs for me!
Price of happiness ..
And boy the dongle rocks... i can take it with me to office.. i can connect it to my desktop monitor, and take it with me when i travel so that my kid does not have to look at the tablet for watching a movie in hotel rooms.
Dongle is better!
Sent from my GT-N8013 using Tapatalk
Hmmmmmm...
Seems I will have to buy this dongle you speak ov.........
Just be aware that the dongle uses wifi to connect. If you have 3G then that gets turned off to accomodate the wifi connection, all other wifi connections seem to be dropped so you can't stream movies from the net to your TV as it only allows 1 wifi connection at a time....
Pain in the bum as a use a wifi HDD to store most of my movies/TV shows.... Can only stream to TV what's on the tablet. But with a 64Gb sd card that is plenty of choice.....
I have a samsung tv also. But like many have said its older. So doesnt work. I have The galaxy note 10.1, Galaxy note II and a HP Laptop with WIDI Build in. I got the Netgear PTV3000 its a push to tv device. Its smaller than a pack of cigs. HDMI out and can be powered from the usb on the tv itself or comes with a outlet plugin adapter. I updated the Firmware to 2.2.4 Which u can get off the internet and this also adds miracast for the nexus devices. Everything works AWESOME. I can stream netflix from all 3. When i stream a movie it goes to FULL screen. I can Stream From VUDU, Hulu and also Stream a blueray movie from my laptop to my TV. Everything just works. The tablet and phone mirror from device to TV. So if i turn my tablet or phone landscape or longways it does the same on the tv. With the laptop u can adjust screen size from the settings of WIDI. The thing is awesome. I take it everywhere. I travel alot so handy in the hotels. Hook it up and good to go. Have any questions i can try and answer. Forget the allshare device this does that plus adds more for other wireless display devices not just samsung. I do admit there is just a tad of lag. Maybe 1/2 a second if that. nothing u can tell while streaming anything. just notice it more when flipping thru screens. Neat to play games from the tablet to ur screen.
Wicklet
rajcrazy said:
Samsung 32EH4000 LED HD TV is one of the best smart TV. It is full HD TV. It's screen resolution 1366 x 768 Pixels.It's screen size is 32".
It is available on price Rs.- 26,899/- with free shipping @ shopbychoice.com
Click to expand...
Click to collapse
I am not buying another, smaller and lower resolution, TV so I can get a feature that was supposed to work with my current 55" Full HD 1080P 3D TV...
hi all, i have bought the above smart tv dongle thingy from maplins
http://www.maplin.co.uk/point-of-view-hdmi-smart-tv-dongle-android-4.1-685649
anyone have one of these? im pretty impressed with it, im not too happy with the menu though and id like to customize it a bit.. any ideas on what can be done with this device?
Thanks
First thing to do with this device
I just got one.
First thing I did was install ADW Launcher Ex on it and get rid of the horrible launcher it came with.
Now I have a very fast 42" tablet, with widgets, live wallpapers the lot, no root required.
This thing has loads of potential, but if you read the customer reviews on Maplin you'll see they haven't understood that this is Android and you can customise the heck out of it.
The only thing I've found missing so far is a lock screen in case you don't want others using it while your not there without unplugging it. I also heard it loses datetime if you unplug it, not surprising as it doesn't have an internal clock battery.
It's surprisingly fast, but if you're mouse pointer will lag under heavy load.
Still exploring potential will post back as I find out more.
Ah thanks! I have since rooted and installed different firmware! I found out that it was a re-branded Rikomagic MK802III and installed the latest firmware for that device which is way better. I have XBMC running alongside MX Player Hardware video decoding, all is sweet. I found out all I needed from this guys post. Enjoy
http://www.rikomagic.co.uk/forum/viewtopic.php?f=9&t=3645
Any one know why Point of View HDMI Smart TV Dongle will not work on my Sony KDL-40V4000 but does work on my logik tv
not really useful for me though
Point of View Android tv dongle screen mirroring
I also have this dongle which is connected to my tv. I also have mine and my Mrs's Android phones which are running kit Kat and another ohms running on jelly bean.
Is there anyway to mirror my or my wife's phone to the dongle add we both have the mirror screen option on or phones?
Answers/help will be appreciated.
Point of View HDMI Smart TV dongle - interface & WD My Passport
Hi,
I have just bought the hdmi dongle and m not very technology savvy. One of the main reasons I got it was to be able to connect my WD My Passport to it to play movies etc. However I can't seem to change the settings on the menu - so when I click on Movies - rather than all my separated folders showing up - instead it shows an icon of my 1500 movies (which includes about 750 clips of my kids). I can't seem to find a way to get it to display the folders, or even a list of the movies rather than the huge icons! Is there a way around this?
Thanks in advance,
Colette