I've recently discovered Tasker** and i really loved it so i though that i'd better creat a thread so other people could do the same and by the same way this is an S4 Special Edition so we can share our profiles to optimise our phones.
*For thoese who doesn't know it : Tasker is an app that let you automate your phone and it's a very powerful tool.
**For further informations check this guide : [TUT] The Ultimate Noob/Beginners Guide to Tasker
*** Download Here : Tasker (3,98$) or ...
#############
Please share your profiles according to this form :
- Profile name : Profile description
How-To:
-Steps ..
-------------------
And if you have a request please don't be shy and post it, we will help each other :highfive:
#############
" * " Mean : press the back button
So here we go with my profiles :
- Screen brightness :I want that my screen brightness is at it's highest when i'm outside and at it's lowest when i'm home.
How-To :
0. Disable Auto-Brightness
1. Creat a new "State" (+)
2a. Select "Sensor"
2b. Select "Light level"
2c. FROM xx TO xx (here it depends on you NOTE : FROM value must be less the TO )
2d. Personally : From 90 to 100 *
3. It will propose you to creat a new task : Name it Outdoor light and click on the check icon
4a. Add a new action (+) -> Display -> Display Brightness -> Go Max (255) and let the "Immediate Effect" Checked *
4b. Now go back the profiles menu and keep holding on "Outdoor light" so you can add an exit task
5. Add an exit task : Name it Indoor Light and click on the check icon
6. + -> Display -> Display Brightness -> 45 (Here put the value that fit you)
///////////////////////////////////////////////////////////////////
- Wifi-Auto On : I want that my phone connect to my WIFI automaticly when i get home.
How-To :
1. + -> State -> Phone -> Cell Near
2. Click on Scan and start walking around your house (Just walk don't run ) and when you finish click on Stop *
3. New Task -> Name it : Wifi On -> + -> Net -> WiFi -> Set "On" *
4. Add Exit Task -> Name it : Wifi Off -> + -> Net -> WiFi -> Set "Off" * -> so when you're now longer wifi will be disabled
//////////////////////////////////////////////////////////////////
Extra :
Moto X Camera : If you want to have that cool Moto X Camera Gesture
(It work with every camera app so maybe you want to try it with Focal, 4.3 Camera .. Have tested only stock 4.2.2 Camera)
How-To :
0.Download the Moto X Camera from here : X Camera(!Optional!)
1. + -> Event -> Sensor -> Shake -> Left-Right
2. Task -> Plug in -> Secure Settings -> Wake Device -> Screen & Keyboard Lights On
3. Task -> App -> Camera
/////////////////////////////////////////////////////////////////
Is there a way to make 3g turn of when the screen is off and on when the screen is on again?
Sent from my GT-I9505 using xda premium
Sammath said:
Is there a way to make 3g turn of when the screen is off and on when the screen is on again?
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
I guess that this would work :
1. + -> State -> Display -> Display State -> Set to Off
2. New task : Name it 3G-Off -> + -> Mobile Data -> Set to Off
3. Add Exit task -> Name it 3G-On -> + -> Mobile Data -> Set to On
If this didn't worked then you should maybe try this :
Profile 1: Display off
How-To
Event -> Display -> Display off
Tasks
Variable -> Variable Set
Name: LCD%
To: 0
Tasker -> IF% ~ 1 PSAFE
Net -> Car Rental
Set: Off
Net -> Mobile Data
Set: Off
+++++++++++++++
Profile 2: On Display
How-To
1. Event -> Display -> Screen unlocked
#Tasks : name it what ever you want :
Variable -> Variable Set
Name: LCD%
To 1
Tasker -> IF% ~ 1 PSAFE
Net -> Mobile Data
Set: On
Net -> Car Rental
Set: On
Click to expand...
Click to collapse
-----------------------------------------------------
Please, for everyone next time if you have a request quote me (so i can have an instant notification every time someone post a request).
karimdag said:
I guess that this would work :
1. + -> State -> Display -> Display State -> Set to Off
2. New task : Name it 3G-Off -> + -> Mobile Data -> Set to Off
3. Add Exit task -> Name it 3G-On -> + -> Mobile Data -> Set to On
If this didn't worked then you should maybe try this :
-----------------------------------------------------
Please, for everyone next time if you have a request quote me (so i can have an instant notification every time someone post a request).
Click to expand...
Click to collapse
Can you upload the project for the first one on brighten
If I actually did help, how bout a Thanks for 'ol times sake
ktetreault14 said:
Can you upload the project for the first one on brighten
If I actually did help, how bout a Thanks for 'ol times sake
Click to expand...
Click to collapse
Here you go, it have another profile for 3G/Wifi Enabling but i'm too lazy to delete it
Sammath said:
Is there a way to make 3g turn of when the screen is off and on when the screen is on again?
Click to expand...
Click to collapse
I Thnik that you will also like thoese one
Any requests ?
Sent from my GT-I9505 using xda app-developers app
karimdag said:
Any requests ?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you to the OP for letting me discover this incredible app.
Now it's time to make some profiles by using scripts and cpu governor
EDIT: Do you guys know what kind of task could be useful to block/unblock notifications?
invano said:
Thank you to the OP for letting me discover this incredible app.
Now it's time to make some profiles by using scripts and cpu governor
EDIT: Do you guys know what kind of task could be useful to block/unblock notifications?
Click to expand...
Click to collapse
Could you please explain a little bit more for what you want ?
karimdag said:
Could you please explain a little bit more for what you want ?
Click to expand...
Click to collapse
I mean something like the touchwiz blocking mode for notification or like iOS. When there is a new notification/call/SMS no sound is played and the screen stays off.
The problem with the touchwiz toggle is that it only works with call and SMS so I'd like to replicate a complete behavior with tasker
invano said:
I mean something like the touchwiz blocking mode for notification or like iOS. When there is a new notification/call/SMS no sound is played and the screen stays off.
The problem with the touchwiz toggle is that it only works with call and SMS so I'd like to replicate a complete behavior with tasker
Click to expand...
Click to collapse
Try :
+ -> state -> display -> display state -> Set on Off
Add a new task :
+ -> Audio -> Slient Mode -> set on On
Sent from my GT-I9505 using xda app-developers app
regarding the wifi-auto-on feature using cell near, its not that accurate, actually its the least accurate location profile context but also the least battery draining. so let me share what i've done with that.
Profile -wifi home:
screen on
+
cell near(walked around my house)
+
wifi near(selected my ssid)(make sure you have wifi toggle selected)
the point of this is that it wont scan for wifi while screen off and it will first try to match all the context in an order. so first the screen has to be on, then the cell towers must be near and lastly the wifi AP must be close, for the wifi to turn on. This eliminates the possible battery drain if you try using only wifi near and poor accuracy by the only cell near context. in my town, there is a shopping center quite near and when i walk past it, my goddamn cell near context was switching wifi AP's all the time, which made me loose my nerves. so i added the wifi-near context and voila!. the wifi turns on when im a few meters from my house.
Galaxy S4 has an Accessibility Setting bug which makes it turn on Talkback and you cant turn it off. It also trigger many other bugs.
I knew about Tasker but it doesn't work right on S4. In fact any app that requires Accessibility enabled doesn't work.
SilentRazor said:
Galaxy S4 has an Accessibility Setting bug which makes it turn on Talkback and you cant turn it off. It also trigger many other bugs.
I knew about Tasker but it doesn't work right on S4. In fact any app that requires Accessibility enabled doesn't work.
Click to expand...
Click to collapse
Don't know about that accessibility bug you're talking about, but I'm a longtime Tasker user and I can tell you that it works flawlessly on my S4.
karimdag said:
Here you go, it have another profile for 3G/Wifi Enabling but i'm too lazy to delete it
I Thnik that you will also like thoese one
Click to expand...
Click to collapse
Thanks bro
If I actually did help, how bout a Thanks
pitastrudl said:
regarding the wifi-auto-on feature using cell near, its not that accurate, actually its the least accurate location profile context but also the least battery draining. so let me share what i've done with that.
Profile -wifi home:
screen on
+
cell near(walked around my house)
+
wifi near(selected my ssid)(make sure you have wifi toggle selected)
the point of this is that it wont scan for wifi while screen off and it will first try to match all the context in an order. so first the screen has to be on, then the cell towers must be near and lastly the wifi AP must be close, for the wifi to turn on. This eliminates the possible battery drain if you try using only wifi near and poor accuracy by the only cell near context. in my town, there is a shopping center quite near and when i walk past it, my goddamn cell near context was switching wifi AP's all the time, which made me loose my nerves. so i added the wifi-near context and voila!. the wifi turns on when im a few meters from my house.
Click to expand...
Click to collapse
Am I wrong or if you use wifi near you must create a task for every ssid that you need?
Instead by using cell near it is possible to set more cells with the same task.
invano said:
Am I wrong or if you use wifi near you must create a task for every ssid that you need?
Instead by using cell near it is possible to set more cells with the same task.
Click to expand...
Click to collapse
Yes for your both questions
Hi all.
Does anyone know if it is possible that when the phone is on silent and gets a missed call / text message an email can be sent to a specific address?
Thanks for your help.
Sent from my GT-I9505 using xda premium
invano said:
Am I wrong or if you use wifi near you must create a task for every ssid that you need?
Instead by using cell near it is possible to set more cells with the same task.
Click to expand...
Click to collapse
karimdag said:
Yes for your both questions
Click to expand...
Click to collapse
what? . you just select the wifi ssid in the context. there are three contexts, one entering(wifi on) and one exiting task(wifi off). thats it.
RustyWrightOne said:
Hi all.
Does anyone know if it is possible that when the phone is on silent and gets a missed call / text message an email can be sent to a specific address?
Thanks for your help.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
You can't do that on silent mode only but maybe you can set a timer : so you can put silent hours and creat a task that contain : 1. Slient mode on and 2. Send to .. - there's also another methode and it doesn't require any timer.
pitastrudl said:
what? . you just select the wifi ssid in the context. there are three contexts, one entering(wifi on) and one exiting task(wifi off). thats it.
Click to expand...
Click to collapse
You will have to creat a new context so you can choose your home ssid it means that you will have 2 profiles : one for the specific ssid and the other for the location-connect
Sent from my GT-I9505 using xda app-developers app
Sammath said:
Is there a way to make 3g turn of when the screen is off and on when the screen is on again?
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Juice Defender can help you with that
Related
Hi,
Simple question:
I need to poweroff WiFi (not wifi idle that is android standard) when Screen goes off and (of course) poweron WiFi When Screen On.
I've found a lot of app that turn on/off wifi in different way, but none do what i need.
Someone can help?
Tia
Idk
Have you tried Tasker ?
badeaioan said:
Have you tried Tasker ?
Click to expand...
Click to collapse
Looking now
Juice Defender is the ABSOLUTE BEST in this regard. You can customise to enable wifi or mobile network to screen on/off or you can customise to connect wifi when you open a certain app that needs data. You can imagine how much battery you'll save. Try it,you wont regret it.
Sent from my X10 TripNMiUI using XDA App
setting profiles does that with very simple config
just set action » rule to screen off » wireless off
and you can even reverse it to screen on » wireless on
remorema said:
setting profiles does that with very simple config
just set action » rule to screen off » wireless off
and you can even reverse it to screen on » wireless on
Click to expand...
Click to collapse
Thanks remorema, i'm trying now, i'll post the result.
Thanks to all XDA!
Bye
Idk
Ok, for me setting profile is the best, work as i need!
Thank to all for very very fast help!
This is the XDA Power!
Idk
Can't you just go into the advanced wifi settings and set the screen off behaviour there? (press menu in the wifi-screen to get there)
Wifi seems to be turned off on my Nook Color after setting this (cm7). At least it reconnects after waking it.
Cell Standby Battery Drain:
Hey Guys!!
Maybe some of you know it. The cell standby drains a lot of battery. I live in a mounterial arrea and it's really annoying. So I searched a bit on Google and build a small Tasker "Script" to reduce the draining. I'm using it now for 6 weeks and it's working good! It reduced my cell standby from 35% to 2%.
So what's the magic?
First tasker will turn Airplane Mode (only cell!) on if you don't have signal. Then it'll wait for 5 minutes and check it again. Yes this sounds really simple but it was hard to build it.
I hope I can help you with sharing my experiences!
Screen off=data/wifi off it no traffic (with Night Mode):
Hey Guys, I have been looking for a solution for this problem for quite a while myself. Now I found a good solution to collect the current traffic on all interfaces. I will share a detailed explanation on how to set it up.
First off, what will happen?
If you want tasker to turn Wifi or Mobile Data off when you the turn Screen off normally you have the problem that it will interrupt all downloads. This Profile will try to read the traffic. If the traffic is below 15 kb it will turn wifi or mobile data off. If not it’ll wait until it is below 15kb. Later If you turn your screen on again tasker will activate mobile data and wifi. It'll wifi doesn't connect to a network (in the next 30 seconds) it will turn wifi off.
How does Tasker work? How can I optimize these profiles/tasks for my needs?
First what does tasker do? This is for the people who don't understand tasker. Tasker has 4 tabs (Profiles, Tasks, Scenes and Vars) but I won't talk about Scenes cz I didn't uses it yet. I also won't talk about Vars (variables) cz they are self explaining.
What are Profiles?
Basically profiles contain conditions (for example if display on/off or wifi on/off) and run a task if the condition is true. Example: If display off turn wifi off.
What are Tasks?
A task is something like a list of actions which the phone should do. (for example turn data on/off or run a specific app)
How do the profiles from this thread?
The profile AutoSync (Screen off) runs every 10 minutes while the screen is off. It turns data/wifi on checks for new messages and turns it off. It has a variable called "%SLEEP". It will only run if "%SLEEP" doesn't match "1".
The profiles Display (Data) and Display (Wifi) turns data/wifi on when the user turns the screen on. When the screen is off again it will check traffic for 30 seconds. If the traffic is below 15kb/s it will turn data/wifi off. If not it will wait 2 minutes and check the traffic again for 30 seconds until the traffic is below 15kb/s.
The profile Night (week), Night (weekend) turn the phone into airplane mode and sets the variable "%SLEEP" to "1".
The profile Wifi connected just changes the variable "%CONNECTION to "1" or removes the "1". This is needed for the Display (Wifi) profile.
On my todolist:
You say..
Changelog v1.3:
Added Greenify's hibernate now to both screen off tasks
Changelog v1.2:
Added AutoSync (every 10 minutes if screen is off)
I'm using this profiles on my Samsung Galaxy Nexus and it works very well!!
Feel free to ask me if you have problems! I'll try my best to help you.
These profiles include the greenify hibernate action from its plugin. If you have troubles with it you have to remove and readd it (on both Screen off tasks) cz my plugin is german. (plugin → hibernate)
You need Secure Settings for tasker or it won't work!! I used Secure Settings because Secure Settings can off only the cell radio. Tasker supports it, too. But not for Jelly Bean and I'm using 4.2.2 :/
How to import *.prj.xml files:
Unzip the *.prj.xml file in your Tasker/projects directory and then import it in Tasker by long-clicking the home icon or any of the other tabs. If you don't have the home tab, swipe down from the top in Tasker to show the tabs. (beginner mode must be disabled!)
Thanks for this 8D!
Useful for a beginner like me ^^!
In task screen off, why do you wait for 30 sec's in Action number 5? Also how important is the Stop Task Action? What happens if I don't include it? I mean anyways, the following 'else' won't be executed if the Mobile data turned off by the 'if'.
Just what I looked for, but How can I install your *.zip file to tasker? I just cant install it, any hint? where should I put the zip file?
kala123 said:
Just what I looked for, but How can I install your *.zip file to tasker? I just cant install it, any hint? where should I put the zip file?
Click to expand...
Click to collapse
unzip it to /sdcard/Tasker/auto-import. Then import it using tasker.
The-Droidster said:
In task screen off, why do you wait for 30 sec's in Action number 5? Also how important is the Stop Task Action? What happens if I don't include it? I mean anyways, the following 'else' won't be executed if the Mobile data turned off by the 'if'.
Click to expand...
Click to collapse
You have to wait 30 seconds or how long you want to wait cz in action number 2 tasker gets a traffic number from the system. After 30 seconds it gets another. Tasker subtracts the values to get the actual traffic in bytes. So Tasker can look if the traffic is below 15 kb/s. Yes you're right. It's my fault. You don't need the Stop Task Action. It's from the old Script. I forgot to remove it. Thanks for your hint!
Hi parthipanramesh,
what I metioned inside the other Thread seems to be working A okay...
What are the modifications/fixes in this version? I can't tell from looking at it here.
RLicher said:
Hi parthipanramesh,
what I metioned inside the other Thread seems to be working A okay...
What are the modifications/fixes in this version? I can't tell from looking at it here.
Click to expand...
Click to collapse
Hi RLicher,
Some people had the issue with the maths calculation of CHECKB_WIFI - CHECKA_WIFI. So tasker will set the variables to 0 if they aren't set. (cz wifi is off or something else). And I deleted/merged some Actions.
You can use the version from the other thread if you don't have problems
I'm using this on SGS3 but notice two issue... While listening to Pandora when a song ends the data or wifi will get disabled so the next song cant start. Second wifi or data will not be reenable when the screen is enabled.
For the record i just imported the files within the zip.
nappent said:
I'm using this on SGS3 but notice two issue... While listening to Pandora when a song ends the data or wifi will get disabled so the next song cant start. Second wifi or data will not be reenable when the screen is enabled.
For the record i just imported the files within the zip.
Click to expand...
Click to collapse
First you have to increase the 30 seconds from the two Screen off tasks [A5] because Tasker checks the traffic for 30 seconds. If Pandora loads a song for example in 40 seconds Tasker will disable data and wifi after it has been loaded. So data and wifi are turned off when Pandora tries to play the next song. Increase the value and you should be good.
And for your next issue:
Delete the imported profile and create a new profile:
Name: Whatever
Context: State → Display On
Task: Create a task which enables data and wifi
Exit Task: Screen off
Re: Tasker solution: Screen off=wifi/data off if no traffic
The-Droidster said:
unzip it to /sdcard/Tasker/auto-import. Then import it using tasker.
Click to expand...
Click to collapse
How do we import?
Sent from my SGH-T999 using xda premium
ktetreault14 said:
How do we import?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Sorry I didn't read your previous post.
Unzip the *.tsk.xml files to sdcard/Tasker/tasks and the *.prf.xml to sdcard/Tasker/profiles. Then open tasker tap on tasks and hold it until a menu appears. Tap on import and you should see the files. Do this for the profile aswell.
First tasks and then profiles!! Or you'll get an error that tasker couldn't find the the task for the profile.
Thanks just pinched your files and made it turn on when the screen comes on.
My current profiles means that Wifi turns off when i leave the office and stays off until I turn it on again.
If im somewhere with no wifi will my wifi be turned on when my screen is turned on?
Would i need to create another profile which says if wifi is on and not connected to a network after X minutes
then please disable?
If so is that an easy one to create?
Thanks
Andy
Iceax123 said:
Thanks just pinched your files and made it turn on when the screen comes on.
My current profiles means that Wifi turns off when i leave the office and stays off until I turn it on again.
If im somewhere with no wifi will my wifi be turned on when my screen is turned on?
Would i need to create another profile which says if wifi is on and not connected to a network after X minutes
then please disable?
If so is that an easy one to create?
Thanks
Andy
Click to expand...
Click to collapse
First yes it will enable wifi.
I solved it with 2 profiles. One changes a variable if wifi is connected or not and the other one is turns wifi on, waits 30 seconds, checks the variable. If my phone is not connected to a wifi it will turn it off.
Do you want my profiles?
Re: Tasker solution: Screen off=wifi/data off if no traffic
Yes please that would be excellent
Thanks
Andy
Sent from my HTC One X using xda app-developers app
Re: Tasker solution: Screen off=wifi/data off if no traffic
Just one last question if I may.
Using this if I turn of data as well will that stop any emails coming in.
I have 3g turned off so am always on 2g but would still want push mail from one account to get through
Thanks
Sent from my HTC One X using xda app-developers app
Also found another issue now
I have a rule set up so when connected to works wi-fi my ringer and notifications are set to low.
But now when i turn my screen off wifi drops and my volume goes up. ARGHHHHH
Andy
Iceax123 said:
Yes please that would be excellent
Thanks
Andy
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Look in the OP!! New version
Iceax123 said:
Just one last question if I may.
Using this if I turn of data as well will that stop any emails coming in.
I have 3g turned off so am always on 2g but would still want push mail from one account to get through
Thanks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yes it will turn generally data off. 2g or 3g it doesn't matter.
Iceax123 said:
Also found another issue now
I have a rule set up so when connected to works wi-fi my ringer and notifications are set to low.
But now when i turn my screen off wifi drops and my volume goes up. ARGHHHHH
Andy
Click to expand...
Click to collapse
It have nothing to do with my profiles and tasks. They only enable connections, check traffic and disable the conncections. Maybe another profile isn't working correctly.
And next time you can edit your post. You don't need to make 3 posts.
Thanks again parthipanramesh, will import these tonight and try
Andy
I am new to tasker and i have been fiddling with it.
How would I add auto sync turns on every 15 minutes when screen is off and auto sync turns on when screen is on to this "script"?
Hello Everyone !
Friend of mine live in the middle of no where where 3g/4g signal doesnt work.
He has Wi-Fi tho, but thing is. His cellphone always try to look for a 3 /4g signal at his home and he wakes up with his battery completly drained prematurely.
Im looking for an app that will auto turn off 3g/4g when connected on a certain Wi-Fi and turn it back on when leaving that Wi-FI
We are both using Galaxy S2 X
Thanks guys !
You can do this with Tasker. You can make a profile. I actually just made one for myself after reading your post.
Profile name (name it anything): DataToWifi
State -> Net -> Wifi Connected
Task: Net -> Mobile Data (On)
Closing Task: Net -> Mobile Dat (Off)
So now, when I turn Wifi On (and it connects to the router), it turns off data. When I turn wifi off, it turns data back on.
Cool ! Thanks a lot Scottocs !
But is it also possible that this task ONLY work on ONE certain WiFi (his home wifi)
Because all others WiFi area works correctly with 3g
Jackzoor said:
Cool ! Thanks a lot Scottocs !
But is it also possible that this task ONLY work on ONE certain WiFi (his home wifi)
Because all others WiFi area works correctly with 3g
Click to expand...
Click to collapse
Yes, you can specify.
I have tasker configured to turn off the lock screen pass code only when connected to my home WiFi. (It also says 'welcome home sir' in an British accent.. lol)
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Okay Thanks ! Still trying to figure out how to do it even with the tutorial...
Jackzoor said:
Okay Thanks ! Still trying to figure out how to do it even with the tutorial...
Click to expand...
Click to collapse
It is sort of confusing, but it's easier to make the tasks before the profile.
I'll give you step-by-step instructions.
Open Tasker
Go to Tasks tab
Click the + button to make a new one - name the first task "DataOff"
Click the + button again
Click the "Net" button
Click "Mobile Data"
Click near the top left of the app (the tasker icon which has a left arrow)
Click it again.
Click the + button to make a new one - name the first task "DataOn"
Click the + button again
Click the "Net" button
Click "Mobile Data"
Change it from "Off" to "On"
Click near the top left of the app (the tasker icon which has a left arrow)
Click it again.
Switch to Profile tab
Click the + button
Name it "WifiToData" (or something else)
Click "State"
Click "Net"
Click "Wifi Connected"
Optional: Type in your SSID
Click near the top left of the app (the tasker icon which has a left arrow)
Choose the "DataOff" Task
Touch and hold your finger on "DataOff" Task in the Profiles tab
Click "Add Exit Task"
Choose the "DataOn" task
Complete!
Llama may be less confusing...
So thanks a lot everyone especially Scottocs for the HUGE help on this.
After scratching my head for about 2-3 hours on this and with Scottocs help I was able to figure out a way for my friend to
Once he enter his house and his phone connect to his Wifi -> Airplane mode ON but leave Wifi ON
and once he disconnect from his Wifi Turn Airplane mode OFF
that was done with
Tasker application and AutoAir
what I did in Tasker was
When Wifi connected -> SSID (wireless connection name)
Load App -> Autoair
(Make sure to go in AutoAir setting and check the box " Start Service on application start up)
and as a Exit Task for this profile
I Simply took Turn Airplane OFF (which mean that once that specific wifi get disconnected turn airplane off)
Hopefully that can help you guys !
Jackzoor said:
So thanks a lot everyone especially Scottocs for the HUGE help on this.
After scratching my head for about 2-3 hours on this and with Scottocs help I was able to figure out a way for my friend to
Once he enter his house and his phone connect to his Wifi -> Airplane mode ON but leave Wifi ON
and once he disconnect from his Wifi Turn Airplane mode OFF
that was done with
Tasker application and AutoAir
what I did in Tasker was
When Wifi connected -> SSID (wireless connection name)
Load App -> Autoair
(Make sure to go in AutoAir setting and check the box " Start Service on application start up)
and as a Exit Task for this profile
I Simply took Turn Airplane OFF (which mean that once that specific wifi get disconnected turn airplane off)
Hopefully that can help you guys !
Click to expand...
Click to collapse
GLad you got it working...I think you could have also done it with the secure settings tasker plugin....i believe it has functions to enable/disable airplane mode and then turn wifi back on/off.....
I'm still trying to figure out how to disable pinlock when power any and bluetooth is linked.....I link bluetooth both home and in the car but have not found best option yet. Tasker is very powerful although complex....you should have seen it before the new version that made things "simpler".
Hey guys,
I'm looking for an app or group of apps that will let me do the following. Been trying Tasker without much luck.
-I want 4G to turn on when I use certain apps (tasker does this)
-I want 4G to turn off when the screen is off (tasker does this)
-I want data to periodically turn on maybe every 10 mins to check for emails and such.
Any ideas?
thanks!
Deep sleep battery saver? I believe it has such an option.
Isn't there an option in tasker to set a timer?
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
ShadowLea said:
Isn't there an option in tasker to set a timer?
Click to expand...
Click to collapse
Anyone have experience with this? I can't figure out how to do it if it is possible. Thanks.
checcles said:
Anyone have experience with this? I can't figure out how to do it if it is possible. Thanks.
Click to expand...
Click to collapse
Try this:
Trigger
1. Time -> Repeat: 10 Min
2. State -> Variable Value
%LCD ~ 0
Tasks
1. Net -> Mobile Data
Set: On
2. Net -> Auto Sync
Set On
3. Tasker -> Wait
Minutes: 1
4. Net -> Auto Sync
Set: Off
5. Net -> Mobile Data
Set: Off
ShadowLea said:
Trigger
1. Time -> Repeat: 10 Min
2. State -> Variable Value
%LCD ~ 0
Click to expand...
Click to collapse
How do I link these two commands?
anyone? thanks
bump.
Hi fellow XDA members, I just came across this awesome app called Tasker. I am still trying to figure it out and learning about it but i know it got huge potential to automate our devices. Many of you must be experts in using it. So I created this thread for all to share their best and favourite Tasker profiles for OnePlus 2. Looking forward to see some wonderful ideas to automate our beloved OnePlus 2.
tasker is not device or rom specific at all, hence i don't think that people ( experienced users ) who us tasker in a sophisticated manner would read and post much in this thread, there are dedicated tasker thread. just stumbled in to see what tasker profiles (tasks) would be especially for the OP2 and as suspected, there are none yet.
I've been looking for a way to use the fingerprint sensor, to secure certain apps, such that only I can access them with my fingerprint. I haven't succeeded yet, so if anyone has an Idea I would appreciate it.
Jakob1379 said:
I've been looking for a way to use the fingerprint sensor, to secure certain apps, such that only I can access them with my fingerprint. I haven't succeeded yet, so if anyone has an Idea I would appreciate it.
Click to expand...
Click to collapse
That's a great idea. Experts, please shed some light on this if it's possible or not.
I don't own a OPO, but I imagine the profiles I run would work on any android. I've only got a few at the moment, some I ditched because I no longer had a use for them since getting on PAC ROM.
Current profiles are:
ClearCache. Autolaunches the Fast Cache Cleaner app everyday at 6:00PM. The app has no UI, so it doesn't interfere with what I'm doing at the time and just quietly clears cache in the background.
LowerMediaVolume: When headphones are plugged in, media volume gets reset to 2. Got sick of scaring the pants off myself when I'd go to listen to music and had forgotten my media volume was maxed out...
TurnGPSOnWhenWazeIsLaunched: I use Waze as my navigator, so I have it set to automatically turn GPS on (through the Secure Settings plugin) when the app is launched. Also included an exit task so once I leave navigation, GPS will shut off as well.
BirthControlTxt and CleaningReminder: They're similar profiles for my bad memory. Everyday at 11:45PM, my phone sends me an SMS reminding me to take my pill (I also have an alarm for this set at 11, this alert is a fallback just in case my alarm goofs). CleaningReminder is set to go off every Monday, but I only clean the factory every other Tuesday. So I set the cool down period to every 13 days, and hopefully that will 'disable' the alert every other Monday. I just made that one so I haven't gotten to test that. In the past, I also had an AutoReboot profile to reboot the phone everyday at 7AM, but I haven't gotten ballsy enough to try it since switching to a somewhat unstable ROM
http://forum.xda-developers.com/galaxy-grand-duos/themes-apps/app-tasker-to-customize-phone-t2876179
Check this out.. I have most of them now also..
Data off when screen off and the data connects when turning on the screen
zombunny said:
TurnGPSOnWhenWazeIsLaunched: I use Waze as my navigator, so I have it set to automatically turn GPS on (through the Secure Settings plugin) when the app is launched. Also included an exit task so once I leave navigation, GPS will shut off as well.
Click to expand...
Click to collapse
Can you share this profile
I can't get to turnoff the gps
Sent from my ONE A2005 using Tapatalk
fburgos said:
Can you share this profile
I can't get to turnoff the gps
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Certainly.
Profile: Application/Waze
Task: Plugin/Secure Settings/System + Actions/GPS/Set ON
Exit task (to create exit tasker: once you have built the above Task, go into your profiles, expand your Waze profile, and long press on your task, then select to add an exit task): Plugin/Secure Settings/System + Actions/GPS/Set OFF.
Results may vary from device to device. This profile worked great when I had a Jellybean stock ROM, now I'm running PAC on 5.1 and while it does work, it occasionally will put my GPS on 'device only' instead of high accuracy, so for reliablity I just toggle GPS myself in my notification bar until I think or hear of a way to do this more reliably in Tasker.
I did it that way but wasn't working...
Cleaned flashed oxygen now works
Thanks
Sent from my ONE A2005 using Tapatalk
Need some help...
Trying to use Tasker to create an action to the 4636 Hidden Menu, so then can export it to an app for quick access.
Was originally trying to do it the phone but didn't work...
Right now I'm trying:
System > Send Intent
Action: android.intent.action.MAIN
Package: com.android.settings
Class: com.android.settings.TestingSettings
Still nothing though
Thanks
khaos64 said:
Need some help...
Trying to use Tasker to create an action to the 4636 Hidden Menu, so then can export it to an app for quick access.
Was originally trying to do it the phone but didn't work...
Right now I'm trying:
System > Send Intent
Action: android.intent.action.MAIN
Package: com.android.settings
Class: com.android.settings.TestingSettings
Still nothing though
Thanks
Click to expand...
Click to collapse
Figured it out...
Needed one additional setting
System > Send Intent
Action: android.intent.action.MAIN
Package: com.android.settings
Class: com.android.settings.TestingSettings
Target: Service
Tried to set tasker to turn on gps when i launch waze but gps cannot be turned on although I have set it properly through secure settings. Anybody can help?
Sent from Oneplus²
Tasker for dark mode?
I'm wondering if Tasker can be used to turn on dark mode on the Oneplus 2 at a specific time of the day. What task option do I use?
spicediablo said:
Tried to set tasker to turn on gps when i launch waze but gps cannot be turned on although I have set it properly through secure settings. Anybody can help?
Sent from Oneplus²
Click to expand...
Click to collapse
I did the same with Google Maps..
PROFILE:
App > GMaps (os Waze)
ENTRY TASK (GPSMax):
Plugin > Secure Settings >System+ Actions > Location Mode > High Accuracy
[Flash "High Accuracy GPS enabled"]
EXIT TASK (GPSMin):
Plugin > Secure Settings > System+ Actions > Location Mode > Battery Saving
I always have battery seving location ON, so I just need to turn on High Accuracy while I'm using GMaps.
You have to install Secure Settings plugin and enable its XPosed Module
aroblu94 said:
I did the same with Google Maps..
PROFILE:
App > GMaps (os Waze)
ENTRY TASK (GPSMax):
Plugin > Secure Settings >System+ Actions > Location Mode > High Accuracy
[Flash "High Accuracy GPS enabled"]
EXIT TASK (GPSMin):
Plugin > Secure Settings > System+ Actions > Location Mode > Battery Saving
I always have battery seving location ON, so I just need to turn on High Accuracy while I'm using GMaps.
You have to install Secure Settings plugin and enable its XPosed Module
Click to expand...
Click to collapse
I think I got the settings right but it's not working.
Below is the description in text
Profile: Waze/gps (6)
Application: Waze, Sygic or Maps
Enter: GPS (7)
A1: Secure Settings [ Configuration:Location Mode/High Accuracy Package:com.intangibleobject.securesettings.plugin Name:Secure Settings Timeout (Seconds):0 ]
A2: Display AutoRotate [ Setn ]
Exit: Autorotate Off (13)
A1: Display AutoRotate [ Setff ]
Sent from Oneplus²
spicediablo said:
I think I got the settings right but it's not working.
Below is the description in text
Profile: Waze/gps (6)
Application: Waze, Sygic or Maps
Enter: GPS (7)
A1: Secure Settings [ Configuration:Location Mode/High Accuracy Package:com.intangibleobject.securesettings.plugin Name:Secure Settings Timeout (Seconds):0 ]
A2: Display AutoRotate [ Setn ]
Exit: Autorotate Off (13)
A1: Display AutoRotate [ Setff ]
Sent from Oneplus²
Click to expand...
Click to collapse
Did you try putting a 1 second Wait at the beginning? Maybe the phone just needs some time..
And use a Flash in order to see if the profile is fired
How do I do that? Can you please give the exact options to set?
aroblu94 said:
Did you try putting a 1 second Wait at the beginning? Maybe the phone just needs some time..
And use a Flash in order to see if the profile is fired
Click to expand...
Click to collapse
Sent from Oneplus²
spicediablo said:
How do I do that? Can you please give the exact options to set?
Sent from Oneplus²
Click to expand...
Click to collapse
Before your A1 do:
Alert > Flash > "GPS fired" (and check the long option)
Activity > Wait > 1s
I can't find activity...
Anyway, the profile is activated but my gps doesn't change to high accuracy....
aroblu94 said:
Before your A1 do:
Alert > Flash > "GPS fired" (and check the long option)
Activity > Wait > 1s
Click to expand...
Click to collapse
Sent from Oneplus²