Hello all,
I am a new user posting from New Zealand.
I recently brought the Atrix HD MB886 online as an "unlocked" phone (I think from Canada?) and it seems to work fine sending txt's and making calls but I cannot get the mobile data to work. If i go into "about" and then "phone status" it shows "Mobile data state - Disconnected"
I have tried adding the APN settings but this doesn't seem to change the disconnected state.
I read somewhere that even though the phone is unlocked, the mobile data may still be locked by AT&T?
If this is true, is there anything i can do to get it connected?
I really love my new phone and i hope i can get this working
These are my phone specs if it is any help:
System version: 98.4.20.MB886.ATT.en.US
Model number: MB886
Android version: 4.1.1
Baseband version: MB886_BP_100740.071.65.04P
Build number: 9.8.0Q_MB886_FFw-20
INsekure said:
Hello all,
I am a new user posting from New Zealand.
I recently brought the Atrix HD MB886 online as an "unlocked" phone (I think from Canada?) and it seems to work fine sending txt's and making calls but I cannot get the mobile data to work. If i go into "about" and then "phone status" it shows "Mobile data state - Disconnected"
I have tried adding the APN settings but this doesn't seem to change the disconnected state.
I read somewhere that even though the phone is unlocked, the mobile data may still be locked by AT&T?
If this is true, is there anything i can do to get it connected?
I really love my new phone and i hope i can get this working
These are my phone specs if it is any help:
System version: 98.4.20.MB886.ATT.en.US
Model number: MB886
Android version: 4.1.1
Baseband version: MB886_BP_100740.071.65.04P
Build number: 9.8.0Q_MB886_FFw-20
Click to expand...
Click to collapse
Wrong sub forum? You're asking about an AT&T Atrix HD MB886 correct? Try in the Atrix HD forum..
What APN did you "try"? What carrier/provider are you using it on? What is their APN?
Related
So I bricked my Showcase, on the Cellular South/C Spire network. I sent it to Samsung and they replaced the PBA? Anyway, I took it to my service provider to get it activated, but apparently when Samsung fixed it they put the newest software on it 2.3.4 which was fine with me, but cellular south was unable to activate the phone. There was a blue circle with a line through it where the service bars should be.
I brought it home and these are the files that i flashed:
atlas_v2.2.2.pit
EE25_fullOdin.tar.md5 &
eh09_modem_uscc.tar.md5, because with just the other two it said it was in airplane mode when it wasn't.
So with these added I dial *#1234# and get this:
PDA: SCH-I500USEE25
PHONE: S:i500.04 K.EH09
CSC: Unknown
Build Info: 2011.05
Also, under about phone>status the Network says: searching for SVC, and the Mobile Network Type is: unknown, with the Mobile Network State: disconnected.
Any help would be greatly appreciated!!!
I'm not sure how to correct your issue, but it's no surprise that CS couldn't correct your issue. Have you tried to contact Samsung?
When you pushed Files with odin, did you use the phone efs clear option? You should. That fixed it for me
Sent from my SCH-I500 using Tapatalk
When you use the Phone EFS Clear option what exactly does it do? I've got a Showcase and it's from an Alaskan carrier and I'm afraid if I used the EFS clear option it's going to mess everything up.
Tangentabacus said:
When you use the Phone EFS Clear option what exactly does it do? I've got a Showcase and it's from an Alaskan carrier and I'm afraid if I used the EFS clear option it's going to mess everything up.
Click to expand...
Click to collapse
Why would you flash a Cellular South ODIN to a Showcase for another carrier?
...Lets use our heads.
In a desperate attempt to have a working phone... That's why.
I too bricked my Showcase, sent it to Samsung, they sent it back w/ 2.3.5 loaded. We got it connected to CSpire's network, however, no data could be sent. You can send and receive calls/texts, but no internet connectivity at all. I downgraded it through Odin w/ the rooted version of CS's GB EH09... it was stuck in boot loop... Then I did a factory reset through recovery mode, boom, GB loads up just fine. We take it to CS, it still won't accept a data signal, but it'll accept a cell signal. I'm at a loss at this point. Any ideas?
Have you dialed *228?
Sent from my SCH-I500 using XDA App
mhwaller21 said:
So I bricked my Showcase, on the Cellular South/C Spire network. I sent it to Samsung and they replaced the PBA? Anyway, I took it to my service provider to get it activated, but apparently when Samsung fixed it they put the newest software on it 2.3.4 which was fine with me, but cellular south was unable to activate the phone. There was a blue circle with a line through it where the service bars should be.
I brought it home and these are the files that i flashed:
atlas_v2.2.2.pit
EE25_fullOdin.tar.md5 &
eh09_modem_uscc.tar.md5, because with just the other two it said it was in airplane mode when it wasn't.
So with these added I dial *#1234# and get this:
PDA: SCH-I500USEE25
PHONE: S:i500.04 K.EH09
CSC: Unknown
Build Info: 2011.05
Also, under about phone>status the Network says: searching for SVC, and the Mobile Network Type is: unknown, with the Mobile Network State: disconnected.
Any help would be greatly appreciated!!!
Click to expand...
Click to collapse
First mistake was flashing a US Cellular Modem on a CS phone, and it was from EH09 not EE25... These things are kinda important.. lol.
Sent from my Galaxy Nexus with flames coming outta the exhaust...
Being a noob and all, I was able to successfully root my galaxy s2 skyrocket using odin and also successfully flash this ROM:
http://forum.xda-developers.com/showthread.php?t=1377087
on to my phone without a single problem. However, I am lost now.. The top of the phone where it usually displays the att icon, notifications, wifi, and cell signal is not showing. All I am able to see is the battery icon at the top right corner. When I boot up my phone it says "No Service" however I am getting service (able to make calls, text, go on the web, etc..) Not sure what the problem is or what I could've possibly done wrong.
Btw, I used this guide to flash the ROM
http://www.traemcneely.com/2011/12/27/install-custom-rom-at-ciq-removed-short-review-instructions/
(I made sure I followed all the steps very carefully)
This is the "status" of my phone if it matters:
Network: AT&T
Mobile Network type: LTE
Service state: In service
Roaming: Not roaming (??)
Mobile network state: Disconnected (??)
Please help!!
Thanks!
Help
I am looking forward to anyone's help about this question!
someone3974 said:
I am looking forward to anyone's help about this question!
Click to expand...
Click to collapse
Perhaps you could look forward to the Q&A section where the OP has already posted this question
Flash proper radios
Sent from my SGH-I727R using xda premium
After booting the new nightly my phone had lost service and gone into roaming. At least then it seemed to recognize it was on verizon wireless. Now it is past that and simply has no network connection. What I am asking for is a very simplified solution for someone who is very inexperienced with odin and such. DIEING HERE GUYS ):crying::crying::crying::crying:
stk162 said:
After booting the new nightly my phone had lost service and gone into roaming. At least then it seemed to recognize it was on verizon wireless. Now it is past that and simply has no network connection. What I am asking for is a very simplified solution for someone who is very inexperienced with odin and such. DIEING HERE GUYS ):crying::crying::crying::crying:
Click to expand...
Click to collapse
If you want cm10.1, flash an unofficial build, settings > mobile settings > CDMA subscription > ruim/sim, toggle airplane mode. Tell all your friends, too.
Sent from my SCH-I535 using xda app-developers app
I've been happily using an HTC MT4G Slide/Doubleshot I got on Ebay since December (I'm in Canada, using it with Wind Mobile, AWG 3G bands). Last Sunday my phone suddenly started showing "No Signal" for the cellular connection (wifi still works just fine), even though I had full signal bars, and I was unable to complete calls, even the *611 carrier service calls. With the Wifi turned off, I noticed I was still receiving emails, oddly enough, even though I could not register on my network. My SIM was working fine in other phones, and a SIM from another carrier (GSM 2G only) worked just fine. I tried a new SIM from my carrier, no luck, same thing.
I know AWS splits its up/downlinks between the 2 sets of bands it uses (1700MHz for up, 2100MHz for down), so I'm guessing something strange happened to selectively knock out the up bands only. But what? My phone is on EmmanuelU's KitKatDS 1.3, but the only unusual thing I could think of software wise was that I had recently updated Xposed framework to the latest version. I though maybe that did something weird to the baseband firmware, so I restored the original stock Gingerbread ROM via ClockworkMod - no change. I applied the available OTA updates from T-Mo - nothing. Re-flashed KitKatDS & restored by current set-up - nothing.
I'm completely stumped and seriously starting to worry it's some freak hardware thing. Anyone here ever experience something like this?
Thanks for any of your thoughts!
Never seen this myself before, check your apns would be my next step. Maybe try *#*#4636#*#* from the dialer and see if what it says there too. But mostly I'm stumped
Sent from my Nexus 4 using XDA Premium 4 mobile app
I just bought this phone when i first got it everything worked. Then the Bluetooth went out and the wifi was intermittent. Then Activated it with str8 talk and a new number the mobile data worked. Fast forward 2/3 weeks My Bluetooth WiFi and now mobile data doesn't work i did a factory reset and still no better. Other weird Problems is there no mac address no Bluetooth address and ip address. i wasnt able to root it or put it in recovery mode(to my knowledge its supposed to be writable. i checd via adb and it was still write protected) Any solutions?
Specs
Verizon/str8 talk
Version: 4.4.4
Build Number SU6-7.2
Hi
Thanks for using XDA Assist.
Which device do you have? Droid Ultra and Droid Maxx are two different phones.
Maxx
Thanks. Try asking in the Q&A forum of your device: http://forum.xda-developers.com/droid-maxx/help
Good luck.