If you were to google "xposed +motorola" you would see ZERO relevant results...
Why doesn't XPosed work on this phone?
abuttino said:
If you were to google "xposed +motorola" you would see ZERO relevant results...
Why doesn't XPosed work on this phone?
Click to expand...
Click to collapse
Works just fine for me. . .
Running a stripped down version of 9.16.9 DST with just the radio from the latest OTA.
Xposed 2.1.4
Using the Master Key dual fix and Android Tuner modules.
Most parts of FemBlack's status bar module also worked without a problem.
Working great for me, just followed the installation procedure.
Xprivacy works great.
Orphee said:
Working great for me, just followed the installation procedure.
Xprivacy works great.
Click to expand...
Click to collapse
Are you unlocked?
Cause, I'm not and thinking that might be a good reason it's not working,.
abuttino said:
Are you unlocked?
Cause, I'm not and thinking that might be a good reason it's not working,.
Click to expand...
Click to collapse
I am
Any of the people running xposed notice any lag right after boot? I used to get huge lag I ended up uninstalling it because of that
Sent from my XT925 using xda app-developers app
saloums7 said:
Any of the people running xposed notice any lag right after boot? I used to get huge lag I ended up uninstalling it because of that
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
No lag at all for me on my deodexed Retail EU ROM.
Latest Xposed Framework installed, rebooted, Xprivacy installed from market, rebooted in recovery, applied 4.1_fix.
Work like a charm.
saloums7 said:
Any of the people running xposed notice any lag right after boot? I used to get huge lag I ended up uninstalling it because of that
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
No lag here.
Does the XPOSED Installer require an unlocked bootloader. Since the exploit was fixed thats a problem for everyone who wants this :/
EDIT: It does work, I ran some test and everything pulls in fine. Also it should since it dosent modify behind the scenes just the front you see.
Can't get it to work on my xt925.
Tried lot of stuff, but nothing worked.
I'm rooted, unlocked and on Stock Rom.
Am i doing anything wrong or is there any way to get it working on odexed Stock Rom?
I havent tried it on my xt926, but works on my s3, tf700t and note 2. It really just depends on the mod. Some are made just for samsung, htc, etc... and then there are a few for any phone.
Some mods work on cm10.1, just trial and error
Sent from my SCH-I605 using Tapatalk 2
Related
I'm really sorry if this is a repost but I searched for a while and never found a solution.
When I fix permissions in rom manager it hangs around 100. Tried 3 or 4 different ics rooms now and all do the same thing.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Seeing as how you've pretty much eliminated it being a specific ROM. I would try uninstalling rom manager. Reinstall. Then flash touch CWM again. idk that's what I would try.
Flashed cwm and reinstalled rom manager still hung up
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
What file is it hanging on? Is 100 the same every time?
Sent from my SAMSUNG-SGH-I727 using XDA
Have you tried installing busy box (stephen erickson) app from the Play Store? It's worked on the Sky ICS ROM based off the latest leak.
hollywood74 said:
Have you tried installing busy box (stephen erickson) app from the Play Store? It's worked on the Sky ICS ROM based off the latest leak.
Click to expand...
Click to collapse
Agreed you need to make sure busy box is installed
Sent from my SGS2 LTE
Sometimes roms already come with busybox installed. However, they need to be updated/reinstalled in order for fix permissions to work. Usually that does the job. If not, try reflashing the rom and make sure you follow the dev's instructions thoroughly.
If your rom comes with busybox. Go to your apps, there should be a busybox installer app in there. Click on it and click install
Sent from my SAMSUNG-SGH-I727 using xda premium
*system error* said:
What file is it hanging on? Is 100 the same every time?
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
hollywood74 said:
Have you tried installing busy box (stephen erickson) app from the Play Store? It's worked on the Sky ICS ROM based off the latest leak.
Click to expand...
Click to collapse
mr_clean5953 said:
Agreed you need to make sure busy box is installed
Sent from my SGS2 LTE
Click to expand...
Click to collapse
AlonB. said:
Sometimes roms already come with busybox installed. However, they need to be updated/reinstalled in order for fix permissions to work. Usually that does the job. If not, try reflashing the rom and make sure you follow the dev's instructions thoroughly.
If your rom comes with busybox. Go to your apps, there should be a busybox installer app in there. Click on it and click install
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks all. It solved my issue here too.
I'm brand new to the SIII, switched from a Rezound yesterday. I'm rooted, unlocked and running CleanRom. I know others have gotten Google Now to work but I'm at a loss for device specific install instruction! This is what I did and had no luck, kept getting force closes and black screens: downloaded the m7_velvet.apk to extsd....rename as 'GoogleQuickSearchBox.apk.....replace in /system/ app....change the permissions to read,write,execute/read,execute/read,execute....rebooted. Any help would be awesome!!
mike1984jr said:
I'm brand new to the SIII, switched from a Rezound yesterday. I'm rooted, unlocked and running CleanRom. I know others have gotten Google Now to work but I'm at a loss for device specific install instruction! This is what I did and had no luck, kept getting force closes and black screens: downloaded the m7_velvet.apk to extsd....rename as 'GoogleQuickSearchBox.apk.....replace in /system/ app....change the permissions to read,write,execute/read,execute/read,execute....rebooted. Any help would be awesome!!
Click to expand...
Click to collapse
Go to here
http://forum.xda-developers.com/showthread.php?p=30809177
Download the flashable zip of your choice for the ARMv7. I recommend the online only version. Then flash it in cwm.
Sent from my SCH-I535 using xda app-developers app
Dont know what post I was reading that was telling me to just install the apk, but what I was trying to install earlier was now obviously just the update apk. Works fine now, thanks!!
I just installed it today. I think it's a little silly that the back button doesn't work to exit the app. Others having issues with that?
dunderball said:
I just installed it today. I think it's a little silly that the back button doesn't work to exit the app. Others having issues with that?
Click to expand...
Click to collapse
Yes that's a common problem, but you have to remember is from jb ported back to ics. It's really good for a port!
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Yes that's a common problem, but you have to remember is from jb ported back to ics. It's really good for a port!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Very true, not going to complain too much and all I had to do was drop a few files. I renamed all the other folders/files it was supposed to overwrite so all is good, didn't need to take a nandroid or anything. Pretty nifty feature to have and takes stock rooted one step closer to JB.
dunderball said:
Very true, not going to complain too much and all I had to do was drop a few files. I renamed all the other folders/files it was supposed to overwrite so all is good, didn't need to take a nandroid or anything. Pretty nifty feature to have and takes stock rooted one step closer to JB.
Click to expand...
Click to collapse
Ya, i loved it on my razr and on my stock rooted s3. But i finally just went with a jb rom
Sent from my SCH-I535 using xda app-developers app
EDIT: Google Now is located under just Google
Hello,
I am currently running the REMIcs 4.0.4 ROM and cannot get Poweramp (paid version) to start.
All that happens is the logo will start, and then stops. No error message at all.
I've tried to clear cache's, stop the other music programs and freeze them, and it still won't work.
Also tried the latest version Jellybean 4.1.2 V6 and get the same result, I'm thinking it's either the other music apps
causing conflicts or Poweramp simply doesn't work with ICS or Jellybean.
Does anyone else have this problem? any help is appreciated.
Just want to add that the ROMs run great, and I really appreciate all the hard work Bilgerryan and the other developers have put into this. Thank you!
Ron
Have you tried searching to see if people with other devices are having problems with Poweramp on ICS+?
Sent from my PG06100 using xda premium
CNexus said:
Have you tried searching to see if people with other devices are having problems with Poweramp on ICS+?
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Yes, both this site and Google. pretty much tried everything they suggested...no go.
One thing I noticed is that Poweramp loads and works fine on my Nexus 7,
with the latest version 4.2 weird.
Thanks for the reply.
Hmm, that means either you flashed a corrupted rom or you didnt wipe enough
Try redownloading and reflashing, but get some md5sum tool and make sure the md5sum matches what dev-host gives you on the rom
Sent from my PG06100 using xda premium
CNexus said:
Hmm, that means either you flashed a corrupted rom or you didnt wipe enough
Try redownloading and reflashing, but get some md5sum tool and make sure the md5sum matches what dev-host gives you on the rom
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I believe CNexus is correct. I've been noticing a lot of people having strange issues that lead back to a Bad DL, or not doing a FULL Wipe before a Flash. Both can be avoided.
CNexus said:
Hmm, that means either you flashed a corrupted rom or you didnt wipe enough
Try redownloading and reflashing, but get some md5sum tool and make sure the md5sum matches what dev-host gives you on the rom
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
I wiped everything three times with both RemICS and Jellybean 4.1.2, but did not check MD5
I will give that a try.
I noticed that the included music app(s) work fine, as well as all my other apps,
No install issues at all. Poweramp shows up in the "running apps" but still will just start for a second and stop.
also, worked fine with NewSense RC2.
I found the following comment in the play store: "please allow interaction with external DSP's again"
I wonder if that could be it?
Well, in any event, it's not a deal breaker for me, still love the ROM.
RBJ26 said:
I wiped everything three times with both RemICS and Jellybean 4.1.2, but did not check MD5
I will give that a try.
I noticed that the included music app(s) work fine, as well as all my other apps,
No install issues at all. Poweramp shows up in the "running apps" but still will just start for a second and stop.
also, worked fine with NewSense RC2.
I found the following comment in the play store: "please allow interaction with external DSP's again"
I wonder if that could be it?
Well, in any event, it's not a deal breaker for me, still love the ROM.
Click to expand...
Click to collapse
DSP manager is removed from both of the ROMs mentioned. That may be your problem.
bilgerryan said:
DSP manager is removed from both of the ROMs mentioned. That may be your problem.
Click to expand...
Click to collapse
Looks like that's it. Tried adding another eq app and it stops before loading just like Poweramp does.
Eta: tested Poweramp on my touchpad using butta 4.05.5 and it's working fine. Guess DSP is the culprit.
Sent from my Nexus 7 using Tapatalk HD
RBJ26 said:
Looks like that's it. Tried adding another eq app and it stops before loading just like Poweramp does.
Eta: tested Poweramp on my touchpad using butta 4.05.5 and it's working fine. Guess DSP is the culprit.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
You should be able to find a flashable somewhere.
bilgerryan said:
You should be able to find a flashable somewhere.
Click to expand...
Click to collapse
Yes, tried that on a fresh install, and no luck.
I just flashed shifty bastard v2.0 and it works! yes!
RBJ26 said:
Yes, tried that on a fresh install, and no luck.
I just flashed shifty bastard v2.0 and it works! yes!
Click to expand...
Click to collapse
At least you're able to use it on one of my ROMs lol.
bilgerryan said:
At least you're able to use it on one of my ROMs lol.
Click to expand...
Click to collapse
yep, working great so far!
Thanks again!
So my Transformer's motherboard was fried. So I went and got it replaced in the service centre. So my tablet was back to stock
I tried unlocking it, but to no avail! I read in some forums that there was an issue if the hardware was changed.
So since I couldn't install custom roms without unlocking, I installed the Xposed Framework. So which all modules would work for stock-rooted-4.2.1 ROM? Any help would be appreciated!
sacthegreat said:
So my Transformer's motherboard was fried. So I went and got it replaced in the service centre. So my tablet was back to stock
I tried unlocking it, but to no avail! I read in some forums that there was an issue if the hardware was changed.
So since I couldn't install custom roms without unlocking, I installed the Xposed Framework. So which all modules would work for stock-rooted-4.2.1 ROM? Any help would be appreciated!
Click to expand...
Click to collapse
GravityBox is a must
I installed it yesterday! Tried the navigation bar tweaks! Didn't work! But I'll try other features of it and check out!
Sent from my HTC One max using XDA Premium 4 mobile app
sacthegreat said:
I installed it yesterday! Tried the navigation bar tweaks! Didn't work! But I'll try other features of it and check out!
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
They only tend to work on 4.2 GUI
I've installed Viper4Android on my N5 (Carbon ROM, ElementalX kernel), and when it works, it works great. However, it doesn't always kick in automatically. Sometimes I have to open the app in order to get it to run.
I've uninstalled the driver/app and reinstalled V4A multiple times. Same issue.
Any ideas on what's going on?
Could be the 4.4.2 0bytes running services issue.
meangreenie said:
Could be the 4.4.2 0bytes running services issue.
Click to expand...
Click to collapse
I'm on Carbon. Interesting...can you shed some light on this issue? I'm assuming there's no workaround.
Also had this issue on slimkat.
Converting to a system app in titanium backup solved it for me.
Sent from my Nexus 5 using xda app-developers app
Alex240188 said:
Also had this issue on slimkat.
Converting to a system app in titanium backup solved it for me.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
How do you go about doing that? (Sorry, relatively new to this stuff.)
woowhee said:
How do you go about doing that? (Sorry, relatively new to this stuff.)
Click to expand...
Click to collapse
We've got a whole viper4android thread in themes and apps which even has flashable zips in it.
Link
http://forum.xda-developers.com/showthread.php?t=2543796
Sent from my Nexus 5 using Tapatalk
I think the answer is given, so we can close this one