Related
Anyone found a suitable armband to go running/work out in while keeping my lovely g2x safe and sound from falling out or getting my sweat all over?
or if you have a universal sized armband and are having success with your g2x in it please do share your experiences!
EDIT:
Review of the VanGoddy Armband: http://forum.xda-developers.com/showpost.php?p=14056733&postcount=16
Check Amazon.
http://www.amazon.com/gp/aw/s/ref=is_box_/181-1178860-7666418?k=g2x+arm+band
Check out the third choice . LOL
Sent from my LG-P999 using XDA Premium App
KRAZYADROIDMASTER said:
Check Amazon.
http://www.amazon.com/gp/aw/s/ref=is_box_/181-1178860-7666418?k=g2x+arm+band
Check out the third choice . LOL
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
[email protected] choice!
yea i looked at those armbands that are on amazon and I am not too wild about them... right now my biggest candidate is the adidas miCoach armband...
http://www.google.com/products/cata...=X&ei=chXSTZDEJoWftwfhsOyXCg&ved=0CG0Q8wIwAA#
though it is nylon and i dont know how i feel about nylon... i would prefer neoprene...
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
Well I am going to take one for the team, I ordered the one that amazon has listed with the ONE bad review... for 17 bux shipped so its whatever...
i went to best buy today and opened a bunch of boxes of stuff and nothing seemed to really fit... i tried the miCoach for the IP4 and it was a huge fail
I pondered using my tunebelt from my nexus one and just getting a different silicone case but with the phone being as big as it is and 12 grams heavier that it may be a little too flimsy and flopping around for my liking...
I want something with the form factor that the amazon armbands or miCoach has where the phone fits into a sleeve and wont flop around... assuming the phone does not stick out literally an inch and the phone will stay in when I am jogging or doing plyometrics, i will be happy with my purchase...
full review to come when i get it...
Thanks looking forward to the review.
Sent from my LG-P999 using XDA Premium App
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
yup... looking for a perfect fit one too.
Try sports authority
shopcity said:
Try sports authority
Click to expand...
Click to collapse
I dont have sports authority and ****'s said they only carry ipod accessories, specifically nano armbands... its more of a bestbuy type of store's job to carry smartphone sports armbands since they actually sell the devices... ipods are a little more universal so ****'s carrys them...
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
I have the exact same problem the only armband that I found on Amazon supposedly sucks doesn't even fits the entire phone
I'm subscribing to this thread hopefully I'll find something nice
JHaste said:
Well I am going to take one for the team, I ordered the one that amazon has listed with the ONE bad review... for 17 bux shipped so its whatever...
i went to best buy today and opened a bunch of boxes of stuff and nothing seemed to really fit... i tried the miCoach for the IP4 and it was a huge fail
I pondered using my tunebelt from my nexus one and just getting a different silicone case but with the phone being as big as it is and 12 grams heavier that it may be a little too flimsy and flopping around for my liking...
I want something with the form factor that the amazon armbands or miCoach has where the phone fits into a sleeve and wont flop around... assuming the phone does not stick out literally an inch and the phone will stay in when I am jogging or doing plyometrics, i will be happy with my purchase...
full review to come when i get it...
Click to expand...
Click to collapse
What case do you have?
I want to have a good case that hopefully also fits in a good armband
Let me know if you find a good combination please I'd appreciate it
Here is a list of armbands I found on Amazon, I think the only solution would be to buy a an armband not designed specifically for the G2X and see which one adapts the best
http://www.amazon.com/gp/search/ref=sr_nr_i_1?rh=k%3Acell+phone+armband%2Ci%3Amobile&keywords=cell+phone+armband&ie=UTF8&qid=1306020133
http://www.amazon.com/iArmbands-Arm..._1_7?s=wireless&ie=UTF8&qid=1306060005&sr=1-7
Found this one: http://www.amazon.com/Elegant-Armba..._14?s=wireless&ie=UTF8&qid=1306075830&sr=1-14
Zspy1985 said:
http://www.amazon.com/iArmbands-Arm..._1_7?s=wireless&ie=UTF8&qid=1306060005&sr=1-7
Click to expand...
Click to collapse
the band is too thin, that phone would flap all over the place with a phone our size... bands with a sleeve are better in terms of comfort and stability
omarsalmin said:
Found this one: http://www.amazon.com/Elegant-Armba..._14?s=wireless&ie=UTF8&qid=1306075830&sr=1-14
Click to expand...
Click to collapse
yea that is the one i ordered that got the couple of bad reviews...
I just got it in the mail yesterday but I was not home to use it, I will take it out for jog tonight and do a full review with some pictures
JHaste said:
the band is too thin, that phone would flap all over the place with a phone our size... bands with a sleeve are better in terms of comfort and stability
yea that is the one i ordered that got the couple of bad reviews...
I just got it in the mail yesterday but I was not home to use it, I will take it out for jog tonight and do a full review with some pictures
Click to expand...
Click to collapse
Thanks for your upcoming review I appreciate that
Ok so here is my review of the VanGoddy Armband for the G2x/O2X/EVO4g/Atrix/any other giant ass phone!
(Picture album is linked on the bottom of the post)
First off I would like to state what sort of view I am coming from as to eliminate any bias by stating my biases from the get go. I am a slim, athletic body type, 14 inch biceps, 6 foot, 160 pounds. I typically will be doing a lot of running with this device and I referee soccer and will often strap it on while I run a game so I can track my positioning, distance, ect. so I wanted a band that would not be too gaudy and I could hide a bit under my sleeves (underarmor and uniform sleeves). Since again running was my main use with some use in the gym I wanted stability while holding the device so it was not sliding around, flopping around or possibly flying out of the pocket. The other main feature I was looking for was material quality and anybody that works out knows neoprene is clutch especially for people who sweat a large amount, like myself, when I work out or go running. Tad bit of personal information for ya there!
The unboxing and first impressions: VanGoddy shipped it in a bubble wrap envelope, nothing fancy and the item did not need anything fancy. Right away when I looked the thing over I could tell that the pocket to hold the phone looked a tad large for my phone and that the plastic screen was cheap and small. Just putting the armband on, I put it on as tight as I could get the velcro to go and it was a perfect fit, very snug and even tighter when I flexed how my arms would be while running.
Upon slotting the phone in I noticed two things, the clear screen cover does in fact suck, and the phone will fall out of the slot naturally. The device was definitely made with a "universally wide" pouch and I would argue favors the wider phones such as the Atrix, Evo4g and DX; our slim phones got the shaft in this design. I put the armband back on, tightened up, even loosened it a hair from where I had it last time and boom! it actually felt pretty good. Swinging my arm around the phone was pretty snug, I could not get it to fall out regardless of what I was doing which earned it some "do points" in the do or die ratings! I would clear this for use in the gym for bench pressing and doing other strange arm angle lift routines.
Onto the screen cover. This was my biggest grip with this thing. You do not get a lot of cover real estate to work with and the way the cover was stitched into the armband was absolutely thoughtless because it does not even come close to sitting flush with the screen. The part that is stitched around the screen on the outside is a flexible plastic and on the inside they overlapped material so that the screen is not sitting against the plastic cover screen. (See picture overlap flap) This caused another problem that annoyed me a little, if the phone shifted in the slot too much to one way or the other the edge of the phone would get caught on one of these flaps on the inside around the screen edge and offset the phone. It did this twice during my little 3 mile jog while I was trying to skip a song. Getting to the notifications bar while in the slot is damn near impossible, I had no trouble hitting the softkeys but the notification bar is inaccessible. This is partly due to the long "ass" our phones have so the top part of our screens will not be within the clear cover's viewing range.
I did and do not play with the phone much while running because I have very satisfying playlists. Handling touches through the screen was about on par with other covers of similar thickness. I did not really have a problem executing touch commands but changing the volume was a little weird since I had to essentially just squeeze and guess where the volume buttons were on the side. On the bright side, because the screen is not very tight to the screen and the neoprene resists water, I never noticed the screen to fog up on me.
All in all for $17 something cents shipped this is not a terrible armband by any means. It is no 30-40 dollar custom phone fitting armband but it is not so cheap that I just pitched it laughing at what I bought, I would say I got what I paid for and maybe a bit more. Score wise I would give this guy a 7/10. It is good but it definitely has some shortcomings. If you are skinny and dont have at least a 13inch bicep I would not recommend you purchase this device, for fear of it sliding off of your arm. Get used to running with this on your left arm, I found the cord positioning much better and it was getting tangled less around my arm.
Some things I would have liked to see and would be a more quality screen cover. A bit more velcro (one more inch) to possibly go tighter for maybe some more extreme sports or intense working out and for smaller biceps. A slot for a Key is always a nice addition but I usually find a place in whatever pair of shoes I have; sliding it behind the phone you would risk it flying out, I would bet money that it flies out on smaller biceps.
If you are looking for something to get the job done then this is the device for you because it does exactly that. It does not do it extremely well, wow, or impress me in any way but it for 17 bucks it served my needs. Again 7/10 from me...
Pictures: https://picasaweb.google.com/108804...?authkey=Gv1sRgCMyb25S03-aJDw&feat=directlink
Enjoy and Thanks for reading!
thanks for the great review. It sounds like this is the best one out there right now.
Just bought one, hopefully it will be sufficient. Just need it to keep the thing dry
swampthing1224 said:
Just bought one, hopefully it will be sufficient. Just need it to keep the thing dry
Click to expand...
Click to collapse
I dont think you will have any problem keeping it dry, just make sure nothing from your shoulder or upper arm drips down since the top is open
http://www.amazon.com/iGadgitz-Resi..._1_4?s=wireless&ie=UTF8&qid=1306182082&sr=1-4
found this one but it's out of stock. try emailing the seller?
Hi,
any experience of having this phone as bike computer?
I ve used my last year just for GPS tracking - turned on and put it to the bag. Now Iam looking for good bike mount, that would allow me to use this as normal bike computer.
Thx for answer
I'm assuming a motorbike? what type? Does it have a visor? If you do, you could probably get one of the suction cup arm mounts and have the phone on that. A clamp system would probably work better though, for security.
i would also like one too,
but for a bicycle
any idea? =D
I would love to have one for my motorbike too!! .. but I think it's hard to find something compatible with our desire z
For bicycle holders, there is this: http://www.ebay.com.au/itm/Bicycle-Bike-Mount-Holder-Cradle-HTC-Desire-HD-Z-/120645190552.
I haven't actually got it on my bike but another user on another forum has it and said it's pretty good for his use.
I just got me one of these
I ended up cutting the bike mount off as I only wanted it for the dry bag (touch screen still works)
Might fit the bill?
waydownsouth said:
I just got me one of these
I ended up cutting the bike mount off as I only wanted it for the dry bag (touch screen still works)
Might fit the bill?
Click to expand...
Click to collapse
Did you buy it? i am also looking for a bike "attachment" for my dZ ...
If you've got the otterbox case like I do, this is nice.
http://www.ebay.com/itm/140529480135?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_2549wt_1163
I use the "ultimate add-ons" one from Amazon on my motorbike. £20, comes with a 2 piece mount and waterproof case. Touchscreen works through the case too, so that's pretty handy. Some people have said the mount is flimsy and doesn't feel secure, but I just done mine up nice and tight and it is fine.
http://www.amazon.co.uk/UltimateAddons-Motorcycle-Release-Resistant-Desire/dp/B005EQQV0I/ref=sr_1_4?ie=UTF8&qid=1332417582&sr=8-4
havingadump said:
I use the "ultimate add-ons" one from Amazon on my motorbike. £20, comes with a 2 piece mount and waterproof case. Touchscreen works through the case too, so that's pretty handy. Some people have said the mount is flimsy and doesn't feel secure, but I just done mine up nice and tight and it is fine.
http://www.amazon.co.uk/UltimateAddons-Motorcycle-Release-Resistant-Desire/dp/B005EQQV0I/ref=sr_1_4?ie=UTF8&qid=1332417582&sr=8-4
Click to expand...
Click to collapse
Ooo very nice
but too bad only from the UK
shipping to canada is gonna be a killer =[
otherwise i'd jump it
there's tons of stuff on ebay to hold your z down.
make a dyi and buy some super strong velcro and have it detatchable :laugh:
So out of the few choices available, which is really the "best" for the G2/Dersire Z? I don't want to buy one that isn't any good, but I don't want to purchase anything really expensive either. I was skeptical about this one mainly due to the fact that it looks like it'd fall out (on a biycle, not a motorbike).
Anyone know someone that has tried this out?
http://www.amazon.com/Arkon-SM427-U...=1345050697&sr=8-1&keywords=htc+g2+bike+mount
I really dont want my G2 flying off on the highway lol. There really aren't that many options to choose from, kinda sucks.
Hi Everyone,
I wanted to know if anyone has tried out or ordered the Nexus 4 Car Dock/Cradle offered by KiDiGi? If you haven't yet heard of it, click here to take a gander. I'm thinking about ordering it and if none of you have been able to try it out, I can try and post up a little review about it. What do you guys think?
Looks decent enough. But I have had a few Arkon mounts I loved but eventually died because the suction cup warped in the hot sun. I am in TX. May I suggest taking it off the windshield when not in use to save the suction cup thingy lol. I now use one Xenomix mount that sits off the dash and hangs off. I use that with either my N7 or the N4.The only thing is that I don't have access to the charging port to that. My workaround is that I already had the Kroppsson Aero mount that fits both N7 and N4, but I wouldn't use it with my N7 due me feeling to obstructed. Anyway another story, another thread lol.
Anyway, the suction cups on both of those are the gel type and adhere to ANYTHING. So if you have curved dashes this would mold over without an issue. And also the adhesive can be reconstituted by wiping it with a damp lint free cloth, much like the N4 Orb .
Bottom line, if you do decide to get it, keep the sun in mind!
that mount is too bulky to not have an attached micro usb port and at $50 it's fairly expensive. try to find a nice universal one so you dont have to buy a car mounts for every new phone. Arkon is one of the better companies, i had one of their vent mount that lasted over 5 years.
Something like this http://www.amazon.com/Arkon-Mobile-...id=1362105434&sr=8-5&keywords=arkon+universal
or this,
http://www.amazon.com/Arkon-MG178-U...id=1362105434&sr=8-8&keywords=arkon+universal
kpjimmy said:
Looks decent enough. But I have had a few Arkon mounts I loved but eventually died because the suction cup warped in the hot sun. I am in TX. May I suggest taking it off the windshield when not in use to save the suction cup thingy lol. I now use one Xenomix mount that sits off the dash and hangs off. I use that with either my N7 or the N4.The only thing is that I don't have access to the charging port to that. My workaround is that I already had the Kroppsson Aero mount that fits both N7 and N4, but I wouldn't use it with my N7 due me feeling to obstructed. Anyway another story, another thread lol.
Anyway, the suction cups on both of those are the gel type and adhere to ANYTHING. So if you have curved dashes this would mold over without an issue. And also the adhesive can be reconstituted by wiping it with a damp lint free cloth, much like the N4 Orb .
Bottom line, if you do decide to get it, keep the sun in mind!
Click to expand...
Click to collapse
Thanks for the tip! It definitely pertains to me because I live in Arizona and it's ridiculously hot, especially during the Summer.
neotekz said:
that mount is too bulky to not have an attached micro usb port and at $50 it's fairly expensive. try to find a nice universal one so you dont have to buy a car mounts for every new phone. Arkon is one of the better companies, i had one of their vent mount that lasted over 5 years.
Something like this http://www.amazon.com/Arkon-Mobile-...id=1362105434&sr=8-5&keywords=arkon+universal
or this,
http://www.amazon.com/Arkon-MG178-U...id=1362105434&sr=8-8&keywords=arkon+universal
Click to expand...
Click to collapse
Thank you! I'm not really good at trying to determine whether something is priced fair. Your input definitely helps. Thanks for providing links to the Arkon mounts, I definitely appreciate it.
neotekz said:
that mount is too bulky to not have an attached micro usb port and at $50 it's fairly expensive. try to find a nice universal one so you dont have to buy a car mounts for every new phone. Arkon is one of the better companies, i had one of their vent mount that lasted over 5 years.
Something like this http://www.amazon.com/Arkon-Mobile-...id=1362105434&sr=8-5&keywords=arkon+universal
Click to expand...
Click to collapse
That's one of the ones I got. Great universal one, but in the end the sun warped the suction cup on that. Because of that, it no longer sticks to anything, not even the windshield. I am keeping it for parts though lol.
And there are reports of the ball joint becoming loose. There is a fix, by inserting a 1"x1" microfiber cloth on the ball joint to give it grip. However, I never had this issue.
kpjimmy said:
That's one of the ones I got. Great universal one, but in the end the sun warped the suction cup on that. Because of that, it no longer sticks to anything, not even the windshield. I am keeping it for parts though lol.
And there are reports of the ball joint becoming loose. There is a fix, by inserting a 1"x1" microfiber cloth on the ball joint to give it grip. However, I never had this issue.
Click to expand...
Click to collapse
Thanks for the tip, i have a clingo dash mount, and the ball joint isn't that good, ill throw in a microfiber cloth from a screen protector. Hopefully it improves it a little. BTW i don't really recommend the clingo universal mount, i thought it would stick really well on the nexus 4 with the glass back, So far it has fallen off twice and it is only 2 weeks old :/
chrisMBP said:
Thanks for the tip, i have a clingo dash mount, and the ball joint isn't that good, ill throw in a microfiber cloth from a screen protector. Hopefully it improves it a little. BTW i don't really recommend the clingo universal mount, i thought it would stick really well on the nexus 4 with the glass back, So far it has fallen off twice and it is only 2 weeks old :/
Click to expand...
Click to collapse
i had the clingo too for the gnex, that mount was all but useless unless the back of the phone was glass even a smooth plastic case didnt work very well. it would probably be good for the nexus 4 but i dont trust it anymore after seeing it drop previous nexus many times.
As for the ball joint i had to tighten it too, i did this by putting a few elastics around the plastic part that holds the joint.
Ram Mounts >= All other universal mounts. Imma let you finish, but...
The Kidigi One X cradle is great, I got it because the phone fits in my usual TPU case unlike the official HTC one. This design appears to be the same. I've been waiting for a dedicated N4 car cradle so I'll probably get one of these. I've never had any trouble with the suction cup on mine, but I doubt it gets hot enough in this country to be a problem... That and my car has a heat reflective windscreen. Which messes up the GPS signal.
Azurael said:
The Kidigi One X cradle is great, I got it because the phone fits in my usual TPU case unlike the official HTC one. This design appears to be the same. I've been waiting for a dedicated N4 car cradle so I'll probably get one of these. I've never had any trouble with the suction cup on mine, but I doubt it gets hot enough in this country to be a problem... That and my car has a heat reflective windscreen. Which messes up the GPS signal.
Click to expand...
Click to collapse
In tropical conditions, even the best tint won't save it if it's left in the sun hahah. The glass gets way hot anyway.
I use the Samsung holder, it comes with a charger too.
http://www.amazon.com/gp/product/B0089VO7HE/
Ordered
I just ordered mine last night, i'll post back when it gets here!
jpegone said:
I just ordered mine last night, i'll post back when it gets here!
Click to expand...
Click to collapse
I have been using mine for 3-4 months now. It fits perfectly and it is a top quality product.
The charger has a strong blue light, but charges 1 mAh in AC mode. So for 35€ more or less (I don't remember how much exactly I paid) I had 2 products I wanted to buy.
In conclusion, a little expensive but a good product in general
Recommend the best car mount here for Galaxy S 5.
A bit more expensive, but the CraigsDocks Dock is billet aluminum and low-profile and is true one-hand operation and adjustable to work with S2, S3, S4, Note series and now the S5.
http://www.craigsdocks.com/samsung-galaxy-s3-s4-note-2-3-car-dock/
I've had mine a year and won't have to buy a new one when I upgrade to the S5 because it fits all large Samsung superphones.
It's also adjustable to work with ALL cases, including the extra large cases that have built-in batteries.
aaa111sss said:
Recommend the best car mount here for Galaxy S 5.
Click to expand...
Click to collapse
Just found this one and share it here: 3in1 Car Mount Kit for SamsungS5
I will be hoping to get The Air Dock shortly after my S5. This will be the best car dock hands down. Just need to make sure the S5 wireless charging covers or stickers don'd take long to arrive.
http://www.indiegogo.com/projects/the-air-dock
For everyone that wants an affordable car dock WITHOUT glass suction cups, I would get this:
http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
fits in your CD SLOT. it's GENIUSSS, just look at allt he reviews. its perfect eye level for the driver too!
Sublim3_Tilt said:
I will be hoping to get The Air Dock shortly after my S5. This will be the best car dock hands down. Just need to make sure the S5 wireless charging covers or stickers don'd take long to arrive.
http://www.indiegogo.com/projects/the-air-dock
Click to expand...
Click to collapse
The air dock is what ultimately tipped the balance for me getting an S5, after seeing it I knew built-in Qi charging was a must have and since Sprint only offers the Nexus 5 in 16GB flavor (not nearly enough, I've got 15GB of stuff on my SD card today which easily exceeds the 12GB formatted capacity, not to mention 2 years from now).
Hope they will make something like this one :
http://www.miniinthebox.com/fr/univ..._61995588663&gclid=CKSBsJ7Mv70CFWXnwgodN4QAIw
Air Dock hands down.
Another vote for Craigsdocks. Absolutely the most adaptable car dock out there. Very well designed and crafted. Well worth the the cost.
Sent from my SCH-I545 using Tapatalk
Acaibowl said:
Air Dock hands down.
Click to expand...
Click to collapse
It looks nice but the expense of it, $70 +20 for the charging coil, then still need a car charger so there's another $30(for an OEM)its a lot of money.
I got one of these a while back and its quite good, just make sure to hold the back of the phone whilst removing or sometimes the back cover comes lose on a clip or two with S4, the magnetism is quite strong.
homer285 said:
It looks nice but the expense of it, $70+20 for the charging coil, then still need a car charger so there's another $30(for an OEM)its a lot of money.
I got one of these a while back and its quite good
Click to expand...
Click to collapse
How can it be good when it doesn't even charge the phone?
Acaibowl said:
How can it be good when it doesn't even charge the phone?
Click to expand...
Click to collapse
Because its so hard to plug in USB lol, is it really worth an extra $75? Also there's no way that thing could output 2A so charging is going to be much slower, just my opinion.
I just order this Car Mounthttp://www.amazon.com/gp/aw/d/B00C9...qid=1396885686&sr=8-11&pi=AC_SX110_SY165_QL70 yesterday. Should be here tomorrow or Thursday with prime shipping.
chillsen said:
For everyone that wants an affordable car dock WITHOUT glass suction cups, I would get this:
http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
fits in your CD SLOT. it's GENIUSSS, just look at allt he reviews. its perfect eye level for the driver too!
Click to expand...
Click to collapse
have you ever used this before? I'm curious to know if it would cause any damage to the internals of the CD slot. I see it has amazing reviews at Amazon (which I trust for the most part) but wondering if you had any personal experience with it...
if it looks to be good, I may get one for the S5 and my iPad Mini (for a long road trip later this summer)
co.ag.2005 said:
have you ever used this before? I'm curious to know if it would cause any damage to the internals of the CD slot. I see it has amazing reviews at Amazon (which I trust for the most part) but wondering if you had any personal experience with it...
if it looks to be good, I may get one for the S5 and my iPad Mini (for a long road trip later this summer)
Click to expand...
Click to collapse
Didn't forget about you:
http://i.imgur.com/YQIh3lT.jpg
http://i.imgur.com/ZNeaWhv.jpg
notice my cd changer is curved out but the rubber "fins" still fit snug and very sturdy. They are rubber and do no damage. if for some reason it just will not fit in there on your car model, you can always send it back worry free (with Prime) but it shouldn't be a problem. the grip has a light rubber pad and is controlled by a spring action adjustment. I love it because i can easily place my phone into it by pushing my phone up and in. I take it out with the same motion, press up and pull out. it is made in Korea and the material and parts are very well made.
I really don't know why some of the people here are buying 50-70 dollar suction phone mounts. that is a total rip off.
Here is the link again: http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
chillsen said:
Didn't forget about you:
http://i.imgur.com/YQIh3lT.jpg
http://i.imgur.com/ZNeaWhv.jpg
notice my cd changer is curved out but the rubber "fins" still fit snug and very sturdy. They are rubber and do no damage. if for some reason it just will not fit in there on your car model, you can always send it back worry free (with Prime) but it shouldn't be a problem. the grip has a light rubber pad and is controlled by a spring action adjustment. I love it because i can easily place my phone into it by pushing my phone up and in. I take it out with the same motion, press up and pull out. it is made in Korea and the material and parts are very well made.
I really don't know why some of the people here are buying 50-70 dollar suction phone mounts. that is a total rip off.
Here is the link again: http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
Click to expand...
Click to collapse
thanks for the detailed write-up and pics! I have the phone and iPad version sitting in my Amazon wishlist right now... maybe will push them to checkout next payday
Upon inspection of both of my vehicles, it looks like it will work really well and actually sit at a great height (within arms and eyes reach) and not block any controls to anything else (only blocking a clock in my Civic and a clock/temp screen in my Highlander)
thanks again :good:
chillsen said:
Didn't forget about you:
http://i.imgur.com/YQIh3lT.jpg
http://i.imgur.com/ZNeaWhv.jpg
notice my cd changer is curved out but the rubber "fins" still fit snug and very sturdy. They are rubber and do no damage. if for some reason it just will not fit in there on your car model, you can always send it back worry free (with Prime) but it shouldn't be a problem. the grip has a light rubber pad and is controlled by a spring action adjustment. I love it because i can easily place my phone into it by pushing my phone up and in. I take it out with the same motion, press up and pull out. it is made in Korea and the material and parts are very well made.
I really don't know why some of the people here are buying 50-70 dollar suction phone mounts. that is a total rip off.
Here is the link again: http://www.amazon.com/dp/B00D4ABOZS...lid=1DT8CDMXBYY8Y&coliid=I321GSEX43RNWH&psc=1
Click to expand...
Click to collapse
co.ag.2005 said:
thanks for the detailed write-up and pics! I have the phone and iPad version sitting in my Amazon wishlist right now... maybe will push them to checkout next payday
Upon inspection of both of my vehicles, it looks like it will work really well and actually sit at a great height (within arms and eyes reach) and not block any controls to anything else (only blocking a clock in my Civic and a clock/temp screen in my Highlander)
thanks again :good:
Click to expand...
Click to collapse
I ordered a similar one, well basically identical, and it fits superbly in my 2008 honda accord exl. It sits just below all the controls. I was some what worried about it not reaching out far enough as the cd player is recessed when compared with all the radio and nav controls. But it's about as perfect as possible. The best part about this mount in my opinion is that it keeps a person like myself from having to many items on the windshield. Without this I'd have- Radar Detector, Phone, toll tag, and gps, way to many things, phone being the largest of them all. Anyway, I'll take some pictures and maybe a mini review later. I highly recommend to anyone who want a good out of the way docking solution.
Pure+ said:
I ordered a similar one, well basically identical, and it fits superbly in my 2008 honda accord exl. It sits just below all the controls. I was some what worried about it not reaching out far enough as the cd player is recessed when compared with all the radio and nav controls. But it's about as perfect as possible. The best part about this mount in my opinion is that it keeps a person like myself from having to many items on the windshield. Without this I'd have- Radar Detector, Phone, toll tag, and gps, way to many things, phone being the largest of them all. Anyway, I'll take some pictures and maybe a mini review later. I highly recommend to anyone who want a good out of the way docking solution.
Click to expand...
Click to collapse
thanks! I'd love to see pictures. I have an '08 civic ex... by looking at my dash, it seems like it would sit above all my controls and only cover up that little screen that shows the radio station and the time.
co.ag.2005 said:
thanks! I'd love to see pictures. I have an '08 civic ex... by looking at my dash, it seems like it would sit above all my controls and only cover up that little screen that shows the radio station and the time.
Click to expand...
Click to collapse
I'll take pictures when I get home this afternoon. I forgot my camera at home today. Was a bit flustered this morning. But I'll get you some pics for sure.
Pure+ said:
I'll take pictures when I get home this afternoon. I forgot my camera at home today. Was a bit flustered this morning. But I'll get you some pics for sure.
Click to expand...
Click to collapse
thanks :good: and no rush
Today the FedEx guy showed up with my Portenzo bookcase.
This is the first time I've ever ordered a case that cost me 100+ after shipping, but damn does it feel solid. The wood frame isn't too tight and putting the N9 in was easy, removing is just as easy since I have the intellistand feature which allows me to prop up the tablet with the added bonus of allowing me to push at the back of the N9 to remove it if necessary.
I got it in black (yes I'm not very creative) but to me it looks like a nice mystery book with no title. I didn't get the magnets that keep the cover closed, it was already quite expensive and I felt that I could live with a strap that kept the case closed. It feels great to hold and the sleep/wake magnet works pretty well.
Overall the case is very solid and in my opinion is a bit expensive but does offer the style and a sense of security for the N9.
LinS123 said:
Today the FedEx guy showed up with my Portenzo bookcase.
This is the first time I've ever ordered a case that cost me 100+ after shipping, but damn does it feel solid. The wood frame isn't too tight and putting the N9 in was easy, removing is just as easy since I have the intellistand feature which allows me to prop up the tablet with the added bonus of allowing me to push at the back of the N9 to remove it if necessary.
I got it in black (yes I'm not very creative) but to me it looks like a nice mystery book with no title. I didn't get the magnets that keep the cover closed, it was already quite expensive and I felt that I could live with a strap that kept the case closed. It feels great to hold and the sleep/wake magnet works pretty well.
Overall the case is very solid and in my opinion is a bit expensive but does offer the style and a sense of security for the N9.
Click to expand...
Click to collapse
I'm jealous. Hopefully I will get mine soon!
I just bought a Portenzo for my wife's Ipad and received it yesterday. They are amazing cases. I really don't think you can find a better case for a tablet.
Portenzo Bookcase
LinS123 said:
Today the FedEx guy showed up with my Portenzo bookcase.
This is the first time I've ever ordered a case that cost me 100+ after shipping, but damn does it feel solid. The wood frame isn't too tight and putting the N9 in was easy, removing is just as easy since I have the intellistand feature which allows me to prop up the tablet with the added bonus of allowing me to push at the back of the N9 to remove it if necessary.
I got it in black (yes I'm not very creative) but to me it looks like a nice mystery book with no title. I didn't get the magnets that keep the cover closed, it was already quite expensive and I felt that I could live with a strap that kept the case closed. It feels great to hold and the sleep/wake magnet works pretty well.
Overall the case is very solid and in my opinion is a bit expensive but does offer the style and a sense of security for the N9.
Click to expand...
Click to collapse
Hey thanks for sharing great pics. Can you tell me where you got the bookcase or show me a link? It's pretty expensive in my opinion lol but I would like to check it out.
Just google Portenzo and you should find it. It is expensive and I can't get myself to pay that premium.
http://shop.portenzo.com/nexus-9/
That's the link. It's expensive but then they also have the pricier leather model. I wish I was loaded and got that. Maybe for my next tablet, for now I like the standard bookcover.
Amazing wonder if the ship to Canada?
What about the camera you need to remove the N9 for pictures?
Worry about heat?
AstroDigital said:
Amazing wonder if the ship to Canada?
What about the camera you need to remove the N9 for pictures?
Worry about heat?
Click to expand...
Click to collapse
I think you have to pay $5 more for the camera hole. Keep in mind, they hand make these tablets made to order for each customer individually. It is DEFINITELY worth the price, in my opinion, it is just a matter of how long you will keep the tablet. I bought one for my wife because she will keep her Ipad until the damn thing literally falls apart. For me, I wouldn't dare spend that much money on a tablet case because I always have to upgrade.
polo79 said:
I think you have to pay $5 more for the camera hole. Keep in mind, they hand make these tablets made to order for each customer individually. It is DEFINITELY worth the price, in my opinion, it is just a matter of how long you will keep the tablet. I bought one for my wife because she will keep her Ipad until the damn thing literally falls apart. For me, I wouldn't dare spend that much money on a tablet case because I always have to upgrade.
Click to expand...
Click to collapse
Thanks I found out about the camera from the website, after I sent Portenzo a message.
Do you think ventilation maybe a issue with the tablet in the case?
People are complaining about heat, it looks like it may if anything add to the issue.
AstroDigital said:
Thanks I found out about the camera from the website, after I sent Portenzo a message.
Do you think ventilation maybe a issue with the tablet in the case?
People are complaining about heat, it looks like it may if anything add to the issue.
Click to expand...
Click to collapse
I dont think so but I'm sure it depends on the tablet. The nexus 9 does get hot but i dont think the portenzo will be effected more than other cases.
AstroDigital said:
Amazing wonder if the ship to Canada?
What about the camera you need to remove the N9 for pictures?
Worry about heat?
Click to expand...
Click to collapse
They do ship to Canada and provide different shipping options too.
I did pay for the camera cut out, it was 5 dollars I think. As for the heat output, the N9 has room to breathe and it doesn't seem to hinder the tablet from cooling down in anyway. I'm not sure (is wood a good insulator/conductor?), but to me it works fine.
I plan on keeping the N9 for a while since it's just the right size compared to the smaller N7 (2012 and 2013) and the Shield Tablet just wasn't to my liking. So spending this much for a sense of security is nice, plus it feels amazing.
I just ordered one, sure from what I read I will not be disappointed
Looks amazing and is my style but I'm entirely too active to have one of these.
Sent by flying midget
I just took delivery of mine and it looks great! Maybe I have more money than sense, but this is my third Portenzo case, the others were for my Nexus 7s. It looks particularly good in this size and aspect ratio, and the angle on the stand is perfect. I wouldn't use anything else.
LinS123 said:
They do ship to Canada and provide different shipping options too.
I did pay for the camera cut out, it was 5 dollars I think. As for the heat output, the N9 has room to breathe and it doesn't seem to hinder the tablet from cooling down in anyway. I'm not sure (is wood a good insulator/conductor?), but to me it works fine.
I plan on keeping the N9 for a while since it's just the right size compared to the smaller N7 (2012 and 2013) and the Shield Tablet just wasn't to my liking. So spending this much for a sense of security is nice, plus it feels amazing.
Click to expand...
Click to collapse
Well, I was not considering this case until reading this thread, and it seems that this would be a worthwhile investment. LinS123, wood is a great insulator- there should be NO problems with letting the tab breathe. I think that this case looks quite worth the money.
Got it
Two things I am not fond about.
1) It is thicker than I expected. Kind of a let down makes the Nexus 9 in the case at least twice as thick than a naked Nexus 9.
2) Should of not got the elastic.
AstroDigital said:
Got it
Two things I am not fond about.
1) It is thicker than I expected. Kind of a let down makes the Nexus 9 in the case at least twice as thick than a naked Nexus 9.
2) Should of not got the elastic.
Click to expand...
Click to collapse
Yeah, I just am not using a case, I think. Too much bulk. I have a little carrying case, but I'm not going to strap it into an overbearing piece of plastic.
I purchased an OTG cable, does not fit in the cut out.
It is shame, not going to cut down the opening and while the Nexus 9 is nice a secure do not want to pull it out of the case.
These are some great looking cases. I especially like the leather ones. I might have to pick one up! Thanks for sharing op!