i have a SD Card Class 4 and i'm using it after flashing Aries Kernel or Pandora or Jarvis the Rom is Lag Like hell ,, is it the cause of sd card ?
I've seen some saying it's smooth on class 4 ,, Thanks in advance
I Figured it out the Reason is the **** Recovery ,, Don't you ever Do a Wipe in Recovery Reformats SD-DATA to Ext3 which make Rom Lags Like Hell!
Reformatted my SD-CARD and Repartitioned to 4 Partitions [ SD(FAT32) - SD-DATA(EXT4) - SD-CACHE(EXT4) - Swap)
The Phone is flying right now and i Got 5076 on AnTuTu Benchmark
Related
I bought a new 16GB class 4 Kingston card from Ebay for my rooted htc desire with S-ON using RA v2.0.0 .it works fine but when I partition the card using recovery or or Easeus or Minitool partition to ext3 format it wont mount sd-ext and gives the error
cant mount /dev/block/mmcb1kop2
error mounting
i have also tried flashing recovery image with this sd card but it doesnt make any difference . i am starting to think it is the sd card as i dont have any problems with my 4GB samsung card .
Hmmmm
Similar issue here with a 16gig class6 (Traxxdata) card
Bought because i wanted to install custom rom with a2sd+ and thought my 8gig class6 would be a bit on the small side ..
Repartitionned under Linux with 14.5G Fat32 & 1.5G EXT3
Put in the phone , flashed Leedroid 2.3d , worked on 1st reboot , but never again afterwards , got erratic behaviour, corrupted ext3 partition, ext3 not mounted etc.....
Did a whole lot of tests :
- Smaller ext3 ( under 1gig ) -> same
- changed layout of sd -> same
- Use of ext2 instead of ex3 -> corruption
I always ended with either boot loop, stuck at boot logo or horrendous boot time when the phone decided to ignore the ext3 & redid the dalvik cache in internal memory ...
Funny ( well not really ) thing is that when using adb shell to check what was going on after the phone had taken ages to boot ( IF it finished booting ) i noticed the following :
/system/sd not mounted ( should be ext3 partition )
symlinks not in place ( makes sense , cause ext3 not mounted )
I then checked the a2sd+ script & found they were checking for the existance of the 2nd sd partition & mounting it only when found , so I tried to mount manually and ......
that worked ..... ( WTF? )
So I'm a bit lost , but my guess goes in the direction that it takes too long somehow
for the 2nd partition to be recognized & when it finally is , the a2sd script has already run maybe ??
Otherwise dunno , but fact is that my kingston 8gb class 6 works like a charm with 6.8 gig Fat32 & 1 gig ext3 ... no issue at all
So our common point is the 16gig in size , and this problem which i hope is fixable , but dunno how
1 thing i noticed though is that my 16gig card seems to heat a lot up more then my 8gig when i use it in my Sandisk microSD reader , so maybe it's draining more current & the desire has problems delivering that much ?
cheers,
G
soton123 said:
I bought a new 16GB class 4 Kingston card from Ebay for my rooted htc desire with S-ON using RA v2.0.0 .it works fine but when I partition the card using recovery or or Easeus or Minitool partition to ext3 format it wont mount sd-ext and gives the error
cant mount /dev/block/mmcb1kop2
error mounting
i have also tried flashing recovery image with this sd card but it doesnt make any difference . i am starting to think it is the sd card as i dont have any problems with my 4GB samsung card .
Click to expand...
Click to collapse
I bought one of these just over a week (Amazon), and although it seems to work with 'normal use'. It was nothing but a pain when used on a ROM that uses ext2sd/data2sd. Infact my Sandisk 2GB class 2 card performed far better.
Others have reported various issues with this specific card. My one will be going straight back for a refund.
First of all
I have a 8gb class 4 kingston sdcard. I've tried partitioning it with CWM recovery "512, swap 128"..........BUT there was a failure. My sdcard's available space became 7 gb, though my phone's still the same...... Now, I wish to partition my sdcard without failure, and i want my phone's available space to be at least 500mb to 1gb after the partition.............so all I need now is suggestions on HOW I PARTITION MY 8GB CLASS 4 CARD WITH 1GB AVAILABLE SPACE ON MY PHONE??............................
I AM USING STOCK JPU WITH A LOT OF FEATURES I ADD TO IMPROVE PERFORMANCE! WITH G3MOD 2.1 OC!
SUGGESTIONS PLEASE
JasonPurungrit said:
First of all
I have a 8gb class 4 kingston sdcard. I've tried partitioning it with CWM recovery "512, swap 128"..........BUT there was a failure. My sdcard's available space became 7 gb, though my phone's still the same...... Now, I wish to partition my sdcard without failure, and i want my phone's available space to be at least 500mb to 1gb after the partition.............so all I need now is suggestions on HOW I PARTITION MY 8GB CLASS 4 CARD WITH 1GB AVAILABLE SPACE ON MY PHONE??............................
I AM USING STOCK JPU WITH A LOT OF FEATURES I ADD TO IMPROVE PERFORMANCE! WITH G3MOD 2.1 OC!
SUGGESTIONS PLEASE
Click to expand...
Click to collapse
Try using the link2sd app from the market and moving them. I think you have partitioned your SD Card properly but you can't see because there is no app2sd script. Link2sd is the easiest way to move apps to the partition. If it still doesn't work then you can use a windows program called minitool partition wizard.
JasonPurungrit said:
First of all
I have a 8gb class 4 kingston sdcard. I've tried partitioning it with CWM recovery "512, swap 128"..........BUT there was a failure. My sdcard's available space became 7 gb, though my phone's still the same...... Now, I wish to partition my sdcard without failure, and i want my phone's available space to be at least 500mb to 1gb after the partition.............so all I need now is suggestions on HOW I PARTITION MY 8GB CLASS 4 CARD WITH 1GB AVAILABLE SPACE ON MY PHONE??............................
I AM USING STOCK JPU WITH A LOT OF FEATURES I ADD TO IMPROVE PERFORMANCE! WITH G3MOD 2.1 OC!
SUGGESTIONS PLEASE
Click to expand...
Click to collapse
partition it on pc...with minitool partition wizard...
Sent from my hybrid g3
Kyorarom Infinity b2 powered by
g3mod 2.1 Final OC
rkkoby said:
partition it on pc...with minitool partition wizard...
Sent from my hybrid g3
Kyorarom Infinity b2 powered by
g3mod 2.1 Final OC
Click to expand...
Click to collapse
how to use minitool partition wizard? step by step please
Google how to partition sd card using minitool partition wizard
Sent from my GT-I5800 using XDA App
Backup ur sd then partition ur sd via recovery .. 1gb sdext & 0mb swap..
ranadip.bswas said:
Backup ur sd then partition ur sd via recovery .. 1gb sdext & 0mb swap..
Click to expand...
Click to collapse
He has tried that and failed. -__- Thats why he made this thread ib the first place
Sent from my GT-I5800 using XDA App
Using partition tools in computer..
Shrink ur fat32 partition 1gb to right side.. Then use the created 1gb unalloted space to create a new secondary partition of ext4 filesystem.. Apply the changes.. U r done..
Smonic said:
Google how to partition sd card using minitool partition wizard
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
+1 to that....i googled to
Sent from my hybrid g3
Kyrillos' 9.0 powered by
g3mod 2.1 Final OC
hey
i have a question about getting more speed while using a2sd+... my sd card is not the fastest and i'm tired of getting lags with daily use apps like facebook, whatsapp and opera. so my question: is it possible to switch chosen apps in internal storage and the others with a2sd+ to sd?
and what about dalvik cache? in kyrillos or kyrora is it with a2sd+ on sd or internal? and is it useful(for speed) to switch it to internal?
big thanks
xXmyselfXx
no ideas?
push
xXmyselfXx said:
hey
i have a question about getting more speed while using a2sd+... my sd card is not the fastest and i'm tired of getting lags with daily use apps like facebook, whatsapp and opera. so my question: is it possible to switch chosen apps in internal storage and the others with a2sd+ to sd?
and what about dalvik cache? in kyrillos or kyrora is it with a2sd+ on sd or internal? and is it useful(for speed) to switch it to internal?
big thanks
xXmyselfXx
Click to expand...
Click to collapse
Yes it is very much possible to have few apps in internal memory and rest in SD card. For this you need a properly formatted SD Card which has partitions. If you are on Kyrillos ROM then App2SD is already there, else you will have to do it on your own. On Kyrillos ROM , install an app called KMAP and it will help you with that...let me know if u need any help with this.
u are using custom or stock rom...
flash kyrillos rom and enable hybrid data2sd its awesome i m currently using this is very fast and stable...
be sure if u r new to this flashing thing then carefully read instruction and how to use odin cause if u do something wrong ur phone might be brick...
no i'm not new in it
i had kyrillos 9.3 but then i switched to kyrora rom... (with g3mod 2.3 and his multiboot)
what do hybrid data2sd? i thought data2sd makes phone slower? (i have class4 sd card)
kmapp is broken...a unknown error... i will flash kyorarom(or is there a difference beetween kyrorarom and kyrillos? 'cause i prefer the design of kyrorarom) again and then i try again...
sd card is formatted with partitions(but without swap)
xXmyselfXx said:
no i'm not new in it
i had kyrillos 9.3 but then i switched to kyrora rom... (with g3mod 2.3 and his multiboot)
what do hybrid data2sd? i thought data2sd makes phone slower? (i have class4 sd card)
kmapp is broken...a unknown error... i will flash kyorarom(or is there a difference beetween kyrorarom and kyrillos? 'cause i prefer the design of kyrorarom) again and then i try again...
sd card is formatted with partitions(but without swap)
Click to expand...
Click to collapse
Data2SD makes phone laggy. Hybrid Data2SD doesn t. In that you can choose what all folders you want to move to the SD card. How to tutorial is given in the G3Mod thread. Check it.
xXmyselfXx said:
hey
i have a question about getting more speed while using a2sd+... my sd card is not the fastest and i'm tired of getting lags with daily use apps like facebook, whatsapp and opera. so my question: is it possible to switch chosen apps in internal storage and the others with a2sd+ to sd?
and what about dalvik cache? in kyrillos or kyrora is it with a2sd+ on sd or internal? and is it useful(for speed) to switch it to internal?
big thanks
xXmyselfXx
Click to expand...
Click to collapse
There's also another alternative available, i.e. Link2SD. Just search for it in the market and follow the instructions mentioned in the description.
I myself have a class 2 sd card, and after switching to Link2SD I've barely gotten any lags on my device!
but how to get link2sd worked while app2sd+ is working?
using this rom http://forum.xda-developers.com/showthread.php?t=2142942 minicm 10 by ngoralph TILL now the MOst sTaBle Jb rom i have ever used:good:
buT
i cant use link2sd or other apps s2E cant mount the ext PARTION a
Also tried using mount2sd from the play store didnt detect my sd ext partion was previously using cm10beta#3 sd ext was showing and every thing worked fine but in this rom sd ext partion is not mounted any solutions??
is this due to using kernel 3.0?
Have you tried mount2SD (script) flashable zip?
http://db.tt/x5mFYaA7
Not sure......
Will You Encourage Me?
Hit "THANKS"
ankitxperia said:
using this rom http://forum.xda-developers.com/showthread.php?t=2142942 minicm 10 by ngoralph TILL now the MOst sTaBle Jb rom i have ever used:good:
buT
i cant use link2sd or other apps s2E cant mount the ext PARTION a
Also tried using mount2sd from the play store didnt detect my sd ext partion was previously using cm10beta#3 sd ext was showing and every thing worked fine but in this rom sd ext partion is not mounted any solutions??
is this due to using kernel 3.0?
Click to expand...
Click to collapse
Hi,
Ext4 is having major issues with respect to scripts such as s2e...
There is a workaround :
Try to flash cm10 build Without any wipe after installing S2E.. will work in theory..
Cheers..
Kernels they Says it need Sd Cards to be partitioned to 3 Partitions like this sd Card>Data>Cache
That's okay for me i've 16 gb card but how to do this?
i also want to Create Swap with them
I'm using Sak Cm10.1.2 and Aries Kernel OC
Because i want to make my phone fly because i'm a big gamer
Thanks in advance. :fingers-crossed:
Hassan 4 said:
Kernels they Says it need Sd Cards to be partitioned to 3 Partitions like this sd Card>Data>Cache
That's okay for me i've 16 gb card but how to do this?
i also want to Create Swap with them
I'm using Sak Cm10.1.2 and Aries Kernel OC
Because i want to make my phone fly because i'm a big gamer
Thanks in advance. :fingers-crossed:
Click to expand...
Click to collapse
Read this for learn to partitioning SD, only step 1:
http://forum.xda-developers.com/showpost.php?p=42928510&postcount=1
And I don't recommend SWAP because your Pico will slow (in SD Class 10 I don't know)...
Regards .
Deic said:
Read this for learn to partitioning SD, only step 1:
http://forum.xda-developers.com/showpost.php?p=42928510&postcount=1
And I don't recommend SWAP because your Pico will slow (in SD Class 10 I don't know)...
Regards .
Click to expand...
Click to collapse
Thank you very much i've done all Partitions Sd Card - SD-DATA -SD-CACHE- Swap
the Phone is flying on performance right now