[ROM][GT-N7100][4.3] CyanogenMod 10.2 builds - Galaxy Note II Android Development

[ROM][GT-N7100][4.3] CyanogenMod 10.2 builds - Galaxy Note II Android Development

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
If this thread becomes a mess, I'll lock it immediately
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/N7100_Info
First time installing CyanogenMod 10.2 to your Galaxy Note 2, or coming from another ROM:
- Read known issues ans FAQs
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP & Gapps to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
Upgrading from CyanogenMod 10/10.1:
- Read known issues ans FAQs
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Wipe data, we're not sure if everything will work yet.
- Reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Bugs:
- Just some minor graphics glitches
ROM :20130821 running build:
http://goo.im/devs/kashamalaga/CM10.2-N7100
GAPPS:
goo.im/gapps/gapps-jb-20130813-signed.zip
Changelog
http://changelog.bbqdroid.org/#/n7100/next
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't mean Out-of-Respect!!!
Thanks and proper creditos to XpLoDWilD & Codeworkx

Reserverd :laugh:

Wow!! Great effort man!
Thank u..looking forward to trying it out.

Totally respect for all team and hard work!!!BIG RESPECT

excelent! too many thanks! im testing now but cant download gapps server is busy

Wooow.. I am speechless..And the only bug is graphic glitces to begin with.. I want to sue Samsung and want the judge to punish them to get software courses from you.

Yay it happened
Downloading and trying it.. Thanks man.

Is this lte?
Sent from my SGH-T889 using xda premium

jpeps said:
Is this lte?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
[ROM][GT-N7100][4.3] CyanogenMod 10.2 experimental builds thread title so I'd guess not.
Edit: seems like I'm stuck in a bootloop. Also without flashing gapps. Did a system wipe from cm10.1 coming.
Bootloop occurs when most things have already been initialized.(softkeys are lit and charging led is also on but the cm bootlogo completes a few cycles flashes brighter and starts again.)
unfortunately i haven't got adb set up on my pc so I can't tell you what's wrong...
will try a dirty flash and report back
Edit2: Dirty flash didn't work either.
Maybe somebody with this issue could post a log. Would certainly be highly appreciated.

Finally! I was waiting for this! I'll try whatever errors it has
Sent from my GT-N7100

lolmensch said:
[ROM][GT-N7100][4.3] CyanogenMod 10.2 experimental builds thread title so I'd guess not.
Edit: seems like I'm stuck in a bootloop. Also without flashing gapps. Did a system wipe from cm10.1 coming.
Bootloop occurs when most things have already been initialized.(softkeys are lit and charging led is also on but the cm bootlogo completes a few cycles flashes brighter and starts again.)
will try a dirty flash and report back
Click to expand...
Click to collapse
So am I.. I am coming from stock ROM and formatted everything before flashing.

clau_la2 said:
excelent! too many thanks! im testing now but cant download gapps server is busy
Click to expand...
Click to collapse
new gapps mirror

Really i respect the job of this developers team CM
Regards
SGN II through taptalk 4

lolmensch said:
[ROM][GT-N7100][4.3] CyanogenMod 10.2 experimental builds thread title so I'd guess not.
Edit: seems like I'm stuck in a bootloop. Also without flashing gapps. Did a system wipe from cm10.1 coming.
Bootloop occurs when most things have already been initialized.(softkeys are lit and charging led is also on but the cm bootlogo completes a few cycles flashes brighter and starts again.)
unfortunately i haven't got adb set up on my pc so I can't tell you what's wrong...
will try a dirty flash and report back but it'll take a while as I have to download a stock rom. (no backup is not smart )
Click to expand...
Click to collapse
I have the same issue coming from latest 10.1 nightly.
Regards.

So anyone could make it boot? I had no success with neither TWRP nor CWM recovery.
And found out something; formating the /preload from CWM causes new ROM (any Custom ROM) to skip the SIM card info and not ask for PIN code.
I guess there is no need to format everything possible for a clean flash

hi lats where is the link????

mater8 said:
hi lats where is the link????
Click to expand...
Click to collapse
1st post Kashamalaga:
ROM :20130729 experimental build:
Need to fix a couple things.
so it didn't work and he is now trying to fix it to provide us with a working version

mater8 said:
hi lats where is the link????
Click to expand...
Click to collapse
here you go , you can get latest builds on goo manager or download from link below
http://goo.im/devs/kashamalaga/CM10.2-N7100
and there is a new build available 20130730. All thanx to our active devs.

kingkij said:
here you go , you can get latest builds on goo manager or download from link below
http://goo.im/devs/kashamalaga/CM10.2-N7100
Click to expand...
Click to collapse
i dont get it 2 boot
i use pilz recovery and get a bootloop

gamesz2 said:
i dont get it 2 boot
i use pilz recovery and get a bootloop
Click to expand...
Click to collapse
i am installing using philz recovery. i will report in a few minutes what are my stats. BY the way did you do factory reset?? and wipe cache and dalvik??

Related

[DEV][ROM][4.3]Cyanogenmod 10.2[WIP][RC-2][STABLE]

CyanogenModCyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This Support of the CyanogenMod is Unofficial and the sources are up at Androidarmv6
Installation
- First time flashing CM10.2 to your Galaxy Fit(Beni) (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10/CM10.1/CM10.2 prior to 20130816 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally restore /data from Nandroid Backup (the update will wipe your /data)
Optionally install the Google Addon
Working List
Boot
Display
Touch
Sensors
RIL
Audio
Wifi
Hardware
SD Card
OMX
Camera
Video Camera
Tethering(USB and Wifi)
Click to expand...
Click to collapse
XDA:DevDB Information
[DEV][ROM][4.3]Cyanogenmod 10.2[WIP][ALPHA-4], a ROM for the Samsung Galaxy Fit GT 5670
Contributors
yajnab, yajnab
Version Information
Status: Testing
Created 2013-10-01
Last Updated 2013-12-23

Reserved

Reserved

Credits
AndroidArmv6 Team
CyanogenMod
Android Open Source Project
My Father- Dr. Nachiketa Bandyopadhyay
My most Dear - Darshana Chatterjee
My COmputer
My Galaxy Fit
My BSNL Broadband Connection
@vishwanathptl- The person who taught me Android
@cyanogen
@sakIndia123
@erikcas
@bieltv3
@rashed9
Andromedia
@TjStyle
At last me @yajnab
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Download Links
Code:
[SIZE="5"][CENTER][COLOR="Red"]Download : >>[URL="http://d-h.st/Ic8"][COLOR="Blue"]RC-2[/COLOR][/URL]
[/COLOR][/CENTER][/SIZE]
Previous Releases
RC-1
Alpha-5
Alpha-4Patch for Bootimage(Alpha-4)
Alpha-3Alpha-2Alpha-1
Click to expand...
Click to collapse
Changelogs
RC-2
Various Upstream Updates
Fixed Tethering
Fixed VideoCam
Can be Used as a Daily driver
Decreased Size
Various Kernel Optimisation
Click to expand...
Click to collapse
Alpha-6
CyanogenMod and AndroidArmv6 Upstream Updates
Goes RC
Click to expand...
Click to collapse
Alpha-5
Camera Fixed
CyanogenMod and AndroidArmv6 Upstream Updates
Click to expand...
Click to collapse
Alpha-4
SD card Fixed
OMX Fixed
CyanogenMod and AndroidArmv6 Upstream Updates
Click to expand...
Click to collapse
Alpha-3
RIL fixed
CyanogenMod and AndroidArmv6 Upstream Updates
Click to expand...
Click to collapse
Alpha-2
Updates from Androidarmv6 and CyanogenMod Mainline
Fixed Audio
Fixed Wifi
Smoother than Alpha-1(Though Laggy)
Updated KGSL drivers from Linux Kernel 3.0.8
Updated Video Drivers from Linux Kernel 3.0.31
Click to expand...
Click to collapse

FAQS and Question and stuffs

yajnab said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Installation
- First time flashing CM10.2 to your Galaxy Fit(Beni) (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10/CM10.1/CM10.2 prior to 20130816 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally restore /data from Nandroid Backup (the update will wipe your /data)
Optionally install the Google Addon
Click to expand...
Click to collapse
Where are link for download and change log?

ZmisiS said:
Where are link for download and change log?
Click to expand...
Click to collapse
Keep patience brother. He might be uploading!

nolinuxnoparty said:
Keep patience brother. He might be uploading!
Click to expand...
Click to collapse
There was no information about the upload, so I asked.

waaaaaaaoooooo awesome!!!!!!
Awesome Bro
u made it
thank u very much for ur hardwork nd patience for building
4.3

ZmisiS said:
Where are link for download and change log?
Click to expand...
Click to collapse
Its the initial release so no changelog.. Status yet to be uplaoded after reviews and downlad link is up

yajnab said:
Its the initial release so no changelog.. Status yet to be uplaoded after reviews and downlad link is up
Click to expand...
Click to collapse
Yes, I know, but my english not good.
Not have camera, I got notification about stop work some applications, not Gapps for this ROM etc. Not recognized SD Card, Gallery stop work etc.

So it would be a good ROM for 1 year till next Android version!
What's not working and working?
Sent from my GT-S5670 using Tapatalk 4 Beta

Review
So might have been one of the few who downloaded it first.I installed the rom on a clean device(wiped /system ,/data ,/cache twice ). The rom is a pre alpha and that is pretty obvious wifi,gsm,bluetooth and sdcard not working are a few things I noticed ,the rom isn't smooth well its kind of smooth on some instances and stutters on others.One of the most irritating parts that I found was the random reboots I personally faced then about 3 in 10secs and when I flashed it a second time it became almost impossible to use the device.also i couldnt seem to find the camera app(stock) on first try and on second the camera app icon was visible but on clicking reboot(all reboots were partial) ,also phone app force closes on some instances.Minor ldpi resizing is still required in the rom namingly in the trebuchet launcher icon size(take layouts from cm10) and in the phone apk's dialpad due to the new inbuilt feature for t9.So to sum it up this rom is a good start but definately not for everyone.
Highlights:
Bugs :
>com.cyanogenmod.phone crashes sometimes.
>random reboots(major bug in my opinion and needs to be fixed first).
Not Working :
>sdcard
>camera(couldnt test as app causes a reboot).
>wifi
>bluetooth
>gsm
>others untested.
Other concerns :
ldpi layouts need resizing in trebuchet launcher icon size(pull from erikcas's github or your cm10)
ldpi layouts need fixing for dialpad due to new T9 interface.

How ?
@yajnab
How do you fix boot ? many legacy devices directly booting to recovery in Android 4.3

TroubleShooter™ said:
@yajnab
How do you fix boot ? many legacy devices directly booting to recovery in Android 4.3
Click to expand...
Click to collapse
I dunno why they are directly booting to recovery. Maybe Ramdisk problem. or the new fstab version 2 problem.. I will be glad if I get a complete log .. WIthout Log nothing can be said

awesome work
first a fall a g8 work from our awesome dev..........:good:
but plz do something for kernel 3.x bro because it will make a lot more things easier and smooth.!!!!!
its a "must" for 10.1 and 10.2!!!! plz do something for it!! :fingers-crossed:

sudarshan_mehta said:
first a fall a g8 work from our awesome dev..........:good:
but plz do something for kernel 3.x bro because it will make a lot more things easier and smooth.!!!!!
its a "must" for 10.1 and 10.2!!!! plz do something for it!! :fingers-crossed:
Click to expand...
Click to collapse
Hi Sudarshan well just about your comment for kernel 3.x just want to clarify that I spoke to alin.p about this(you know developer of badass kernel) .
He told me that firstly it will be a reaaaal big pain in the ass and the efforts required will be massive for any developer trying to do so.
Secondly the kernel will be slower or equal to the performance quality of the current kernel being used(this in context with his badass kernel).
Thirdly a similar chat with erikcas resulted in me asking about how a cleaner code path is the best way to get max performance( for real that is).
alin.p answered this by letting me know that the hacks used currently for badass or standard android 4.x kernel in our armv6 devices shall remain (as they are device specific and required to run the kernel on our devices).
so the performance you get using the badass kernel is the most you can ever hope from our devices(IMO for any rom ....and i speak from experience with galaxy fit).
so enjoy the device while it manages to last cause from what i hear 5.0 wont ever run on an armv6 device(they are but rumours).
Regards,
Dark Passenger.
PS if you are wondering badass has most of the features from 3.8 and 3.4(the best selection in concern to our device) and so its kind of like a cyborg kernel that is 90% machine and only 10% human(the 10% being the 2.6 part).

yajnab said:
I dunno why they are directly booting to recovery. Maybe Ramdisk problem. or the new fstab version 2 problem.. I will be glad if I get a complete log .. WIthout Log nothing can be said
Click to expand...
Click to collapse
Downloading right now, will see if it boots!

Dark Passenger said:
Hi Sudarshan well just about your comment for kernel 3.x just want to clarify that I spoke to alin.p about this(you know developer of badass kernel) .
He told me that firstly it will be a reaaaal big pain in the ass and the efforts required will be massive for any developer trying to do so.
Secondly the kernel will be slower or equal to the performance quality of the current kernel being used(this in context with his badass kernel).
Thirdly a similar chat with erikcas resulted in me asking about how a cleaner code path is the best way to get max performance( for real that is).
alin.p answered this by letting me know that the hacks used currently for badass or standard android 4.x kernel in our armv6 devices shall remain (as they are device specific and required to run the kernel on our devices).
so the performance you get using the badass kernel is the most you can ever hope from our devices(IMO for any rom ....and i speak from experience with galaxy fit).
so enjoy the device while it manages to last cause from what i hear 5.0 wont ever run on an armv6 device(they are but rumours).
Regards,
Dark Passenger.
PS if you are wondering badass has most of the features from 3.8 and 3.4(the best selection in concern to our device) and so its kind of like a cyborg kernel that is 90% machine and only 10% human(the 10% being the 2.6 part).
Click to expand...
Click to collapse
I think the news is not well flashed to you all.. Samsung MSM7x27 3.x kernel is just a step ahead.. What we need is to get the mtd working on our device. The main problem is one error can get our device bricked during development.. My UART is arriving the next week lets see if i can get the mtd working in the device. After that nearly everything will be easy as LG has already got a stable 3.x kernel to work with.. ...

[UnORom][Marshmallow] CM 13 for Sensation [05 Nov]

UnORoms Project
Presenting you CyanogenMod 13 Marshmallow
UNOFFICIAL VERSION
About CyanogenMod
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod Website
About CyanogenMod
CyanogenMod Source

Credits
CyanogenMod - For their source
@Flemmard : Thanks for awesome device trees and kernel. For fixing Camera using 3.4 drivers
@u-ra : Helping me fix camera
@shantur (me) : Fixing bits in Camera
@bilal_liberty
@Sultanxda
@ivanich
@SebastianFM
@johnnyslt
@albinoman887
If I have forgotten anyone, I apologise please pm me and i will correct my mistake
Features
3.4 Kernel based on HTC MSM8960 - @Flemmard - You are the man
3.4 Camera Drivers and libs
Continuous Autofocus in Photo and Video modes.
HDMI working with specific steps http://forum.xda-developers.com/showpost.php?p=51684382&postcount=176
Awesome sound
In kernel mp-decision
Stock Sensation XE CPU frequency 1.5GHz
Fast Charge enabled
Uses SD-EXT as data
[*]No known freezes or reboots.
... will add more to list as things go on.

DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards or you
* getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications.
I am not part of CyanogenMod, I just compiled this rom for Sensation as part of UnoRoms Project. In no way I take the credit for Source
Instructions
This is a Rom base for devs. I will not support / answer noob questions.
This ROM uses SD-EXT as data partition. If you don't have one don't try this rom, it wont boot
1. Prepare SD card with SD-EXT as ext4
2. Download Latest Release and cm recovery from link below
2. Install CM-Recovery using fastboot flash recovery recovery.img. latest TWRP from Ivanich
3. Boot into recovery
4. Install Rom by adb sideload <Rom.zip> as usual
5. Hit Thanks

Downloads
Downloads
Source

NOTE
This thread is just for developers. I intend to create a base for other devs to take over.

XDA:DevDB Information
Cm 13 Sensation, ROM for the HTC Sensation
Contributors
shantur, shantur
Source Code: https://github.com/UnORoms
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-10-29
Last Updated 2015-11-05

Building Right now. Wait for few hours

Find and report bugs but dont expect them to be fixed soon

Dont get scared of blank screen after boot animation, its still running behind the scenes.

Uploading... Uploading... Uploading...
Uploaded Enjoy

Thanks Shantur. Will try to install and report back.
Sent from my Sensation using XDA Free mobile app

Thanks man. I've managed to install with adb sideload(twrp by ivanich) and windows 10. Was a bit pain in the a$$.$ tho.
Small bugs:
1. File manager(stock): Unable to gain the required privileges to function, but ES works great(adb push-ed)
2. Few random reboots, but totally expected.
Among that, everyhing is working. Definitely smoother than Lollipop.
YOUTUBE preview CM13

Imotep95 said:
Thanks man. I've managed to install with adb sideload(twrp by ivanich) and windows 10. View attachment 3522578 Was a bit pain in the a$$.$ tho.
Click to expand...
Click to collapse
You just had to do it once, i had to do it at least 20 times
Sent from my A0001 using Tapatalk

At last something special come
Thanks Shantur

@shantur i try to flash this ROM on latest Twrp by Ivanich and it booted.
After installation i got an error that installation fail but when i reboot system it booted sucessfully

Khizar Ali said:
@shantur i try to flash this ROM on latest Twrp by Ivanich and it booted.
After installation i got an error that installation fail but when i reboot system it booted sucessfully
Click to expand...
Click to collapse
Its flaky, at times it works at times it doesnt but the adb sideload with cm recovery works everytime.

Flash supersu v2.52 for full root. SUPERSU
supersuv2.52.zip https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip

One for the noobs
Hello Shantur you said This is a Rom base for devs. But please consider makeing a build for us noobs with your kernal and your know how, one that you would also used. With normal install instead of adb sideload.
And witch gapps package is used??.
Thanks

Burth67 said:
And witch gapps package is used??.
Thanks
Click to expand...
Click to collapse
I tried all MM gapps, with some i got bootloop with some phone is unusable(black screen, reboots etc).
Sent from my m8 using Tapatalk

Imotep95 said:
I tried all MM gapps, with some i got bootloop with some phone is unusable(black screen, reboots etc).
Sent from my m8 using Tapatalk
Click to expand...
Click to collapse
not sure if this will help, I have had issues with LP GAPPS at times and found that if you boot into the os then dlear the data for play store and play services then immediately reboot this can resolve some instability issues.
not boot loops though.

Imotep95 said:
I tried all MM gapps, with some i got bootloop with some phone is unusable(black screen, reboots etc).
Sent from my m8 using Tapatalk
Click to expand...
Click to collapse
Have you tried Deltadroid's 6.0 gapps? gapps-600-base-20151022-2-signed.zip | thread

Burth67 said:
Hello Shantur you said This is a Rom base for devs. But please consider makeing a build for us noobs with your kernal and your know how, one that you would also used. With normal install instead of adb sideload.
And witch gapps package is used??.
Thanks
Click to expand...
Click to collapse
I see it is for devs as i wont be maintaining the rom once it gets stable. There is no difference in rom for dev or noob. If you want you can use this rom people are saying they are able to flash it using ivanich's twrp. The reason adb sideload is needed because right now i dont have any other stable recovery for Marshmallow.
I havent tried any gapps yet. Its really early stage. All the code in CM is not merged, tbh i wasnt expecting it to work this early. CM has not even started building any msm8960 device.

shantur said:
I see it is for devs as i wont be maintaining the rom once it gets stable. There is no difference in rom for dev or noob. If you want you can use this rom people are saying they are able to flash it using ivanich's twrp. The reason adb sideload is needed because right now i dont have any other stable recovery for Marshmallow.
I havent tried any gapps yet. Its really early stage. All the code in CM is not merged, tbh i wasnt expecting it to work this early. CM has not even started building any msm8960 device.
Click to expand...
Click to collapse
Thanks for your explanation, I will wait until it is sorted out. I like the roms you puts out, because it is stable and works wel. :fingers-crossed::fingers-crossed:

Imotep95 said:
Thanks man. I've managed to install with adb sideload(twrp by ivanich) and windows 10. Was a bit pain in the a$$.$ tho.
Small bugs:
1. File manager(stock): Unable to gain the required privileges to function, but ES works great(adb push-ed)
2. Few random reboots, but totally expected.
Among that, everyhing is working. Definitely smoother than Lollipop.
YOUTUBE preview CM13
Click to expand...
Click to collapse
Burth67 said:
Hello Shantur you said This is a Rom base for devs. But please consider makeing a build for us noobs with your kernal and your know how, one that you would also used. With normal install instead of adb sideload.
And witch gapps package is used??.
Thanks
Click to expand...
Click to collapse
New build uploaded to same location. Majorly upstream changes
Use the latest TWRP by @ivanich Thanks to him you guys can install without adb sideload

shantur said:
New build uploaded to same location. Majorly upstream changes
Use the latest TWRP by @ivanich Thanks to him you guys can install without adb sideload
Click to expand...
Click to collapse
Thanks Shantur you are very kind to us noobs. :highfive: :highfive:
When installing latest Rom with ivanich latest twrp recovery i keep getting error=7 , what should i do ??

[ROM][i9305][6.0.1][GELLO] Temasek's UNOFFICIAL CyanogenMod 13 [UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION | DOWNLOAD AND CHANGE LOGS | FAQ, BUGS, AND KNOWN ISSUES | CREDITS AND THANKS
temasek's UNOFFICIAL CM13 BUILDS
This is an unofficial maintainer thread for all current and future unofficial builds of CM13 created by @temasek. This thread was created on his behalf and will be maintained accordingly. Please report any bugs or issues that you see; when applicable, please follow the bug reporting format found in post #3. Download links, changelogs and other important information can be found in post #2. Thank you.
DISCLAIMER
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
STOP!
If you do not read EACH and EVERY "OP" POST made by me (i.e. the first 5 posts) and post rudely, report bugs incorrectly, or ask for ETAs/feature requests, you WILL be called out for it.
You have been warned. Most, if not, any information you may be looking for can be found either in among these 5 posts or by performing a simple search using good key words. Think before you post. Thank you.
Download Links and Changelog
FAQ and Trouble Shooting
Credits and Thanks
The lastest version TWRP (3.0.2-1) is recommended.
Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.
Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
3.2. FLASH AGNI AGAIN IF YOU ARE USING SUPERSU INSTEAD STOCK SU due to update zip flashing stock kernel.
3.3. Right after flashing ROM zip, flash updated GApps package. Flash the GApps right after to prevent "Setup Wizard has stopped working"
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
[email protected]
Also consider donating to @PartimusPrime for making our amazing boot animation!: http://forum.xda-developers.com/donatetome.php?u=4620435
Source Code:
https://github.com/limjh16/roomservice/blob/temasek13.0/roomservice.xml
XDA:DevDB Information
Temasek's UNOFFICIAL CyanogenMod 13, ROM for the Samsung Galaxy S III I9300
Contributors
limjh16, rodman01, p.a.n, Temasek, Trafalgar Square, Arter97, and whoever else who helped me!
Source Code: http://github.com/temasek/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 10.8
Stable Release Date: 2016-08-15
Created 2016-05-22
Last Updated 2016-08-15

Reserved
My AFH Folder for Temasek ROM
My Google Drive Folder for Temasek ROM
Open GApps [6.0.1]
MD5 file for ROM can be found on AFH.
Flash this to enable root access
SuperSU
CM13 Build
Build Version: v10.8
Android Version: 6.0.1_r61
For the most up to date changelog please visit:
Temasek’s CM13 Github Commits
I will also be including my own changelog in future builds.No difference from Temasek changelogs.

Reserved
Multiple RIL Implementation
Since I am using @p.a.n sources multiple RIL implementation is active. However changes were made to both device, kernel and vendor sources which may have broken some things, because it did break RIL for me (Sometimes).
Multiple RIL implementation
In this ROM, there are more then one RIL implementations. None of them is perfect, but you can choose, which one of them works better for you. The first RIL implementation is the usual CM 12.1 based one (this is the default one), the second one is based on proprietary files extracted from stock 4.4.4 ROM downloaded from sammobile.com (I9305XXUFOB2_I9305PHNFOB2_I9305XXUFOA1_HOME.tar.md5), the third is based on proprietary files from TheMuppets, with one small change (see here for details). To switch between them open shell (over adb, or using the build in app, or whatever you like) and execute command ril. You will see something like this:
Code:
Select RIL implementation:
* 1 - CM 12.1 based
2 - Stock 4.4.4 based
3 - TheMuppets based
x - quit
?
I recommend you to change and play with the different implementations, however do keep in mind some things:
1. Stock 4.4.4 based IS NOT WORKING. You will notice RIL dies after reboot.
2. I personally use TheMuppets, but CM 12.1 is occasionally better. Do note that this is my personal preference, so do play with both implementations.
Titanium Backup - External SD Card problems (This Folder is NOT Writeable)
http://www.titaniumtrack.com/kb/tita...-not-writeable
Q: Is this ROM Stable?????? A: Yes. Unless stated as experimental.
Q: F2FS PLSSSSSS???? A: No.
Q: WHY NOT BOOT??? / WHY BUG???? A: Read below, and under "known issues"
Q: NEW BUILD PLS PLS PLS???? A: The weekend when Temasek finishes a new version
Some other issue?You can't just say 'x is broken!' and expect me to magically find the bug and fix it.
Here's what I need:
Steps to reproduce - I don't care if "it's simple". I want to know exactly what you were doing at the time of the bug. How'd it happen? Does it only happen on Tuesdays when watching a specific YouTube video? Include it *all*
What happened - in what way is this *not* the expected behaviour? Don't just say "it didn't play/upload/whatever". Did the entire phone crash? Did it show an error? Did it just show an endless progress indicator? Again, I need specifics here.
Logcat/last_kmsg - Include the whole thing please, and if your phone's been running for a while, give me a rough region of time when the issue happened. Use last_kmsg if your device reboots unexpectedly, otherwise use a logcat.
For more FAQ, please visit @p.a.n 's thread here and read the OP as I used his sources.
HOWEVER PLEASE DO NOT POST QUESTIONS THERE. Just check whether your question is already answered.
I will answer all bug reports/questions to this ROM on this thread however please read above and adhere.
If you want SuperSU instead stock SU, Please flash Agni Kernel smdk4412 version or Boeffla Kernel.
If you want to install GApps after bootup, please follow the steps below:
1st method
Go to recovery and wipe /system
Flash ROM, then GApps
2nd method (If you want to update GApps)
Go to recovery and follow dirty flash instructions above
Tell me

Reserved
@rodman01 @Trafalgar Square I did it haha
@p.a.n Thanks so much for source code
@temasek @arter97 for being creators of the ROM
and of course, to CM Slim AOKP Omni and whoever else helped in this ROM

Last one, just in case.

What are the differences compared to normal CM?

dawidd6 said:
What are the differences compared to normal CM?
Click to expand...
Click to collapse
Check the change log. There are a lot of features kanged from other ROMS
Why not try it out and see for yourself?

with f2fs support will be Perfect

So many roms for our beloved s3. This is awesome.
I think that bug with gapps "setup wizard" crashing is depending on the gapps package and not the roms fault. :good:

JD. A said:
So many roms for our beloved s3. This is awesome.
I think that bug with gapps "setup wizard" crashing is depending on the gapps package and not the roms fault. :good:
Click to expand...
Click to collapse
Yeah it only happens with open gapps, but I don't recommend bank or Delta gapps because it's not tested haha... apparently the updater script is in the ROM, but I'm outside so I'm lazy to post instructions... will do when I get home

M4tEUSh said:
with f2fs support will be Perfect
Click to expand...
Click to collapse
Nope I'm sorry. I'm not a supporter of f2fs, I can't test it due to me being lazy to backup data/media )) and lastly it doesn't compile (main problem)

Thanks!
Add this to cm.mk
Code:
# Custom unofficial build tag
TARGET_UNOFFICIAL_BUILD_ID := temasek
Then you ZIP name will be cm-13.0-20160522-UNOFFICIAL-temasek-i9305-V8.6.zip

Trafalgar Square said:
Thanks!
Add this to cm.mk
Then you ZIP name will be cm-13.0-20160522-UNOFFICIAL-temasek-i9305-V8.6.zip
Click to expand...
Click to collapse
Why thank me? Anyways noted, will do that in next build.

@limjh16 root access works without flashing supersu. Just enable in developer options. The rom seems to be working fine.

JD. A said:
@limjh16 root access works without flashing supersu. Just enable in developer options. The rom seems to be working fine.
Click to expand...
Click to collapse
Yeah I did mention if u want to opt for SuperSU instead stock su

limjh16 said:
Yeah I did mention if u want to opt for SuperSU instead stock su
Click to expand...
Click to collapse
Oh I must have misunderstood then. The rom works great, had some random reboot at startup when selecting language. Other than that it's cool. I really like that you used p.a.ns multiple ril implementation too. It seems to be working better for me than the other roms.

JD. A said:
Oh I must have misunderstood then. The rom works great, had some random reboot at startup when selecting language. Other than that it's cool. I really like that you used p.a.ns multiple ril implementation too. It seems to be working better for me than the other roms. ????
Click to expand...
Click to collapse
Well, if that's so enjoy your stay! I will be regularly providing builds though don't expect any optimisations as I'm busy with another rom now haha

I will not be providing v8.8 due to problems in kernel by cm sources which disallows wifi to be connected.

congratulations @limjh16 been waiting for you to release your temesek:good:

alias_ z3d said:
congratulations @limjh16 been waiting for you to release your temesek:good:
Click to expand...
Click to collapse
Thanks! Finally fixed my errors lol

[Closed Project]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits @savadam for video
These builds are based on CM-13.0 with features cherry-picked from many sources including CyanogenMod, AICP, AOKP, Durty Unicorns, Slimroms, @Sultanxda, @jgcaap, etc... Kernel is currently built under Linaro 6.x, thanks to @DespairFactor for keep Toolchains updated
All credit goes to @temasek for the ROM development also @arter97 which is head of optimization for ROM..
My goal is to contribute to the HTC One M9 (Himaul) community with all the knowledge I have acquired over the years here in the forum
If you want to keep this magnificent ROM active and updated and if you like my work, feel free to contribute with small donation
Optimizations
* Linaro Toolchain to build Kernel
* Kernel Build Flags (STRICT_ALIASING, KRAIT_TUNINGS, ENABLE_GCCONLY, GRAPHITE_OPTS)
* F2FS compatible on data & cache
* SQLite 3.14.1 database
* Root access under "Developer Options"
More is coming...
Temasek spare parts
* App circle bar
* App bar
* Clock widget
* Gesture Anywhere
* Lockscreen features
* Recents Panel (AOSP & Slim & Omniswitch)
* Screen Animations
Features
* Snap Camera
* Viper4Android
* Call Recording
* OnTheGo Mode
* 3 finger gesture screenshot
* PIE
* Heads Up Notifications
* Network traffic meter
* DPI Settings
Instalation Instructions
Clean flash (If coming from another ROM)
* Nandroid backup your current rom
* Wipe Data/Factory Reset
* Wipe System, Data, Cache, Dalvik (ART) Cache (DON'T wipe internal storage)
* Flash latest CM 13.0 Firmware
* Flash Rom
* Flash Recomended Gapps - Choose Pico or Nano package
* Reboot and enjoy!
Dirty flash (If you want to update temasek)
* Nandroid backup your current rom
* Flash Rom (Without wipe nothing)
* Reboot and enjoy!
Downloads
Latest build - v11.5 [19/09/2016]
Android FileHost - Under Test
Sources
FSadino Github
Temasek Github
Cyanogenmod Github (kernel source)
Credits
@temasek for development of rom
@arter97 for optimizing this rom
@katinatez @jgcaap @@blinoff82 for all help
@DespairFactor
And last but not least all supporters and testers
<<<<<< My Personal Kernel Settings (OnePlus One) >>>>>>
XDA:DevDB Information
Temasek 6.0.1 for HTC One M9 (Himaul), ROM for the HTC One (M9)
Contributors
FSadino
Source Code: https://github.com/FSadino?tab=repositories
ROM OS Version: 6.0.x Marshmallow
Based On: CYanogenMod
Version Information
Status: Testing
Created 2016-09-18
Last Updated 2016-09-21

Reserved
FAQ's & General Tips
Can I flash custom kernel on this ROM?
* Yes, you are free to flash custom kernels on this ROM but don't report any bugs you may find
How format Data/Cache partitions to F2fs?
1. Make nandroid backup with TWRP (In case something goes wrong and you want to revert)
2. Backup all internal storage (sdcard) to USB pen drive
3. Put ROM/Firmware/Gapps on USB pen drive (It can be the same you used on step 2
4. Now reboot recovery and do a factory reset
5. Wipe all partitions (System, Cache, Data, Dalvik/Art)
Format Data ( Including internal storage)
1. Check the box for "data"
2. Tap "change or repair file system"
3. Tap "Change file system"
4. Tap "F2FS"
5. Swipe the button
Use the same method for "Cache"
You can now flash your ROM as usual but, since you wiped your internal storage, you have to use pen drive where is all needed files
GPS not accurate or slow fix satellites
* Use FasterGPS to configure your gps.conf
Problems with battery not charging or drain to fast.
* Calibrate your battery by let it discharge completely and do a full charge without interruptions. It must calibrate after 2/3 cicles
How to dirty flash new gapps?
1. Using file explorer navigate to system/addon.d
2. Delete file that says gapps example "70-gapps.sh, 80-gapps.sh, 82-gapps.sh"
3. Flash new gapps in recovery
How can i switch SElinux to "Permissive"?
* You can use Kernel Aduitor

Reserved
Changelog:
18/9/2016 - Initial Release

ROM is currently under testing and if you encounter any issues/bugs feel free to give your feedback.
I don't support custom kernel or 3rd party apps on my projects, feel free to use them but DON'T report bugs
Thanks again @Roobwz for testing my unofficial Temasek ROM. :good:

Nice work!

FSadino said:
ROM is currently under testing and if you encounter any issues/bugs feel free to give your feedback.
I don't support custom kernel or 3rd party apps on my projects, feel free to use them but DON'T report bugs
Thanks again @Roobwz for testing my unofficial Temasek ROM. :good:
Click to expand...
Click to collapse
Possible build for us himawhl devices please?

Shryvone21 said:
Possible build for us himawhl devices please?
Click to expand...
Click to collapse
It depends on HTC himaul feedbacks community

FSadino said:
It depends on HTC himaul feedbacks community
Click to expand...
Click to collapse
I flashed the rom but it keeps rebooting on the HTC screen and doesn't even go to the temasek boot animation. What should I do? because I want to help

InsaneNexuS said:
I flashed the rom but it keeps rebooting on the HTC screen and doesn't even go to the temasek boot animation. What should I do? because I want to help
Click to expand...
Click to collapse
You should follow ALL installations instructions without skip any steps

FSadino said:
You should follow ALL installations instructions without skip any steps
Click to expand...
Click to collapse
woops I did skip a step... My bad gonna try again
---------- Post added at 05:25 PM ---------- Previous post was at 04:55 PM ----------
InsaneNexuS said:
woops I did skip a step... My bad gonna try again
Click to expand...
Click to collapse
tried it multiple times still same problem. Followed every step

Does anyone can clean flash this ROM without no problems?

Is it "must" flash cyanogen firmare,or is it optional?

Boskoel03 said:
Is it "must" flash cyanogen firmare,or is it optional?
Click to expand...
Click to collapse
Its optional. CM firmware works but if you have better results with other, there is no problems with that.

FSadino said:
Its optional. CM firmware works but if you have better results with other, there is no problems with that.
Click to expand...
Click to collapse
Thanks for fast response,will try ur work and report,thanks for ur work and cheers

Bootloop. Can't pass HTC Boot logo. Installed over a CM build that boots fine, so the ROM before yours ain't the issue.

MuyKurioso said:
Bootloop. Can't pass HTC Boot logo. Installed over a CM build that boots fine, so the ROM before yours ain't the issue.
Click to expand...
Click to collapse
Other user reported that to, maybe something is wrong.
Try with a clean flash.
Factory reset > Wipe all partitions (not internal) > flash ROM > Flash gapps
If it continues I will remove ROM and build again.

Also bootloping,tried twice,all factory reset and all wipes,onluywithout CM firmare,nothing.. Not know what is causing that..

I think I found the fix for bootloop. Is building right now. I hope can upload in 2/3h

New test build is uploading...
Should be available in aprox. 1h, please test and report

FSadino said:
New test build is uploading...
Should be available in aprox. 1h, please test and report
Click to expand...
Click to collapse
Should we flash over CM? Or only this ROM?

[ROM] LineageOS-14.1 for T31x

I am creating this thread as a place to discuss development of unofficial LineageOS14.1 builds for the T31x devices. Those of you that have been around here for a while already know that I tend to get busy with other stuff and disappear a times. So, with that said, if you would like to contribute to the development of this rom, please feel free to do so. I can make you a contributor and you will have the ability to modify this OP as required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Standard Disclaimer
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
All the source code for LineageOS is available in the Lineage Github repo. And if you would like to contribute to LineageOS, please visit the Gerrit Code Review.
What Doesn't Work:
- flash it and see
==============================
If you want to use this tablet for phone calls, see THIS post before installing.
==============================
==============================
WIFI WORKS - BUT, If you have an issue with wifi not working AND your mac address shows a value starting with 02:00:00, do not post about it UNLESS you take a dmesg log (immediately after a reboot) and post it with your message. Google can tell you how to take dmesg log or see THIS thread.
==============================
INSTALLATION
- Make sure you're running latest TWRP version
- Copy GApps and rom ZIPs to your internal or external SDCard
- Boot into Recovery
- Perform WIPE:
In TWRP, select Wipe --> Advanced Wipe.
Check Dalvik/ART Cache, System, Cache, and Data
Swipe to Wipe
- Flash rom zip
- Flash GApps zip
- Reboot
Updating to a newer version of THIS rom ("dirty" flash)
- Boot into Recovery
- Flash rom zip (no need to re-flash gapps or wipe anything)
- Reboot
If you have any issues after doing a "dirty" flash, do a clean install before reporting any problems.
Downloads
gr8nole no longer builds. tigger 2014's builds pass safetynet and cuberio1 builds only occasionally.
LineageOS
Old Builds by gr8nole : https://www.androidfilehost.com/?w=files&flid=140570
Builds by cuberio1 : Google Drive
Builds by tigger2014 : https://androidfilehost.com/?a=show&w=files&flid=281549
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 7.1 zip) I use nano.
HEADS UP: Be sure you flash the gapps package when flashing your rom. If you boot your rom, then try to flash gapps later, you will have issues.
CHANGELOG
For a list of LineageOS source changes, you can review the i9300 nightly changelog located HERE.
The i9300 is a similar platform to ours, so much of what is listed there will be applicable for us, unless it is i9300 device specific.
DEVICE SPECIFIC SOURCES
- Kernel: https://github.com/gr8nole/android_kernel_samsung_smdk4x12
- Common T31x device: https://github.com/gr8nole/android_device_samsung_lt01-common
- SM-T311: https://github.com/gr8nole/android_device_samsung_lt013g
- SM-T310: https://github.com/gr8nole/android_device_samsung_lt01wifi
- SM-T315: https://github.com/gr8nole/android_device_samsung_lt01lte
- Vendor files: https://github.com/gr8nole/proprietary_vendor_samsung
CONTRIBUTORS
- LineageOS Team, CyanogenMod and AOSP contributors.
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
XDA:DevDB Information
[ROM] LineageOS-14.1 for T31x, ROM for the Samsung Galaxy Tab 3 8.0
Contributors
gr8nole, cuberio1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: KitKat Firmware
Based On: LineageOS
Version Information
Status: Beta
Created 2016-11-04
Last Updated 2019-03-24

Reserved
Make sure you follow the installation instructions.
Do not ask about dirty flashing.
This is a very early build, so please don't start reporting a bunch of little bugs. I know there are things that don't work.
Wifi does work

Screenshots

Great work. Thank you!

Thanks for all the hard work!!!
Sent from my SM-G935T using XDA-Developers mobile app

Whaoo Thanks.
I tried it, wifi working, bluetooth also. I had difficulties with flashing because TWRP was not seeing my filesystem, so I flashed first with flashify, then formated my sd card, then reinstalled.
More details coming
Edit :
Internet, YouTube, Facebook, Dropbox, GPS, downloads working :
Not alpha anymore

You are the man!!!!

Awesome! Thanks!
Thanks for all the gr8t & hard work. I have flashed to CM14.1 on my Galaxy Tab 3.
What is working on my tab 3:
Wifi, bluetooth, gps, camera/video recorder!!!
All seems to be in order. Thanks again Gr8nole!!!

First build for T311 is up.
Give it a test and post logcat with any error reports.

gr8nole said:
First build for T311 is up.
Give it a test and post logcat with any error reports.
Click to expand...
Click to collapse
Can I have a dirty flash from cm13? I know should have a clean but just curious.

Thanhtho96 said:
Can I have a dirty flash from cm13? I know should have a clean but just curious.
Click to expand...
Click to collapse
Test a dirty flash. If it works then all good and if doesn't, clean flash it again.
sent from my beast, Samsung Galaxy Tab 3 8" T311 (old but gold?) running V5 S5 ROM using Tapatalk.

Ibbi786 said:
Test a dirty flash. If it works then all good and if doesn't, clean flash it again.
sent from my beast, Samsung Galaxy Tab 3 8" T311 (old but gold) running V5 S5 ROM using Tapatalk.
Click to expand...
Click to collapse
Nice anwser

As info..... This ROM supports RRO.....so the older Layers Manager will work to theme this beast!!!

T311 cant detect SIM. Logcat coming soon (Clean flash)

It also lag a little bit when open settings, play store etc (I mean animation, you can turn off it). And Battery is drain bcs miscellaneous bug. Here is t311's logcat

gr8nole said:
First build for T311 is up.
Give it a test and post logcat with any error reports.
Click to expand...
Click to collapse
Can you update Linux kernel to new version?

Бахрам Байрамза said:
Can you update Linux kernel to new version?
Click to expand...
Click to collapse
If it still can run great, so dont need to update it. Dont waste time

Ah new bug: Cant access external storage with every file explorer even file manager

Noob mistake or perm issues ?
Hello,
First of all, thanks for all the awesome work you have been doing with this build @gr8nole !
I needed a different/newer ROM for my tablet and have been waiting for a while to finally test one. :good::good::good:
Not sure if I need to modify or configure it properly but it seems that I'm having some permission issues ? I can't download and then save files from within a browser or manage to bypass a few tweaks I made ( ex: tried to VPN, it connects via OpenVPN and displays correct IP Server stats, but it still uses my local IP. Also had to copy the opvn file via USB cable ).
Not complaining and I am really glad that I am able to use such a recent build on my tablet ( and it looks and runs awesome ! ). Just wondering if there's anything one could do, in order to have it running exactly like I want it to !

s3vla said:
Hello,
First of all, thanks for all the awesome work you have been doing with this build @gr8nole !
I needed a different/newer ROM for my tablet and have been waiting for a while to finally test one. :good::good::good:
Not sure if I need to modify or configure it properly but it seems that I'm having some permission issues ? I can't download and then save files from within a browser or manage to bypass a few tweaks I made ( ex: tried to VPN, it connects via OpenVPN and displays correct IP Server stats, but it still uses my local IP. Also had to copy the opvn file via USB cable ).
Not complaining and I am really glad that I am able to use such a recent build on my tablet ( and it looks and runs awesome ! ). Just wondering if there's anything one could do, in order to have it running exactly like I want it to !
Click to expand...
Click to collapse
For browser downloading, you need to give the browser app "storage" permission, then may need a reboot for correct permission to apply.
Not sure about the vpn stuff.

Database Info

welcome