Related
Hi Guys,
I've been using Paranoid Android for some time now and love it. I have just downloaded the latest version, performed Dragun's wipe script and when trying to install, I keep getting an error stating a status 7, some symlinks failed. I have tried re-downloading the rom, plus a previous version as well as full wiping everything and factory reset to no avail. Has anyone had this issue? Can anyone help?
I have just tried to install another rom to get past this for now, however it appears the phone is now stuck on the loading screen... Any help would be appreciated.
I would post in the development thread for the rom, however as I haven't posted before, I don't have sufficient permissions.
Cheers,
Mike
Mikeparakh said:
Hi Guys,
I've been using Paranoid Android for some time now and love it. I have just downloaded the latest version, performed Dragun's wipe script and when trying to install, I keep getting an error stating a status 7, some symlinks failed. I have tried re-downloading the rom, plus a previous version as well as full wiping everything and factory reset to no avail. Has anyone had this issue? Can anyone help?
I have just tried to install another rom to get past this for now, however it appears the phone is now stuck on the loading screen... Any help would be appreciated.
I would post in the development thread for the rom, however as I haven't posted before, I don't have sufficient permissions.
Cheers,
Mike
Click to expand...
Click to collapse
are you S-ON or S-OFF?
rzr86 said:
are you S-ON or S-OFF?
Click to expand...
Click to collapse
Hi
I'm S-OFF.
Mikeparakh said:
Hi
I'm S-OFF.
Click to expand...
Click to collapse
then check if you have the latest fw version
as far as i know paranoid android rom requires 3.32fw or 3.33fw
also what recovery do you have?
rzr86 said:
then check if you have the latest fw version
as far as i know paranoid android rom requires 3.32fw or 3.33fw
also what recovery do you have?
Click to expand...
Click to collapse
I'm on 3.33 and am using 4ext recovery touch. Thanks.
Mikeparakh said:
I'm on 3.33 and am using 4ext recovery touch. Thanks.
Click to expand...
Click to collapse
All fixed now thanks to the wonderful developers of PA. Thanks for your help though!
Mikeparakh said:
All fixed now thanks to the wonderful developers of PA. Thanks for your help though!
Click to expand...
Click to collapse
Can i please what steps you took to get this working again? I get same symlink error when trying to flash from CWM
midnight2065 said:
Can i please what steps you took to get this working again? I get same symlink error when trying to flash from CWM
Click to expand...
Click to collapse
flash the latest firmware if you do not have it(you have to be S-OFF)
also install 4ext recovery.it is better
I've been running Stock Rom (4.1.1) with Bullet_proof_kernel and TWRP (instead of stock kernel and stock recovery),Recently I was notified on an update to 4.2.2 via OTA. And when I was asked for installing the update package after downloading (424 MB),it simply goes into TWRP,and nothing happens. I tried flashing it through twrp but it doesn't work(I get some errors on it). What if,I flash Stock kernel and stock recovery and then try updating it??If that's possible,Can anyone provide me with a link for downloading them? It would also be great if you suggest an alternate way to update it to 4.2.2 [stock].
Thanks in advance!!
As I've told at least 3 other people in the last couple days: OTAs require stock recovery to install.
Also, I think your bootloader will need to be relocked if you are S-on.
If you are already bootloader unlocked and custom recovery, just install one of the stock (or stockish) Sense 5 ROMs posted in Development. Flash like any other custom ROM.
redpoint73 said:
As I've told at least 3 other people in the last couple days: OTAs require stock recovery to install.
Also, I think your bootloader will need to be relocked if you are S-on.
If you are already bootloader unlocked and custom recovery, just install one of the stock (or stockish) Sense 5 ROMs posted in Development. Flash like any other custom ROM.
Click to expand...
Click to collapse
Yeah,I tried them but It did'nt work..Getting the same error in it.(Error executing update binary in zip). And I have S off with unlocked bootloader..Can you provide me with the link of stock recovery?
Akil97 said:
Yeah,I tried them but It did'nt work..Getting the same error in it.(Error executing update binary in zip). And I have S off with unlocked bootloader..Can you provide me with the link of stock recovery?
Click to expand...
Click to collapse
What version of TWRP?
Going back to stock recovery has been asked so many times, I'm not going to bother answering. Try reading or doing a search.
redpoint73 said:
What version of TWRP?
Going back to stock recovery has been asked so many times, I'm not going to bother answering. Try reading or doing a search.
Click to expand...
Click to collapse
TWRP 2.5.0.0.And I was trying for it for hours and couldn't find anything on reverting to stock recovery..I downloaded a ROM [stock] Sense 5 4.2.2
and even tried flashing it through recovery but it throws me the same error..
Akil97 said:
TWRP 2.5.0.0.And I was trying for it for hours and couldn't find anything on reverting to stock recovery..I downloaded a ROM [stock] Sense 5 4.2.2
and even tried flashing it through recovery but it throws me the same error..
Click to expand...
Click to collapse
Its been discussed here countless times that TWRP 2.5.0.0 is buggy, and many ROMs will not install with it. Update to 2.6.0.0.
This is probably your main issue. Returning to stock recovery is a poor remedy.
redpoint73 said:
Its been discussed here countless times that TWRP 2.5.0.0 is buggy, and many ROMs will not install with it. Update to 2.6.0.0.
This is probably your main issue. Returning to stock recovery is a poor remedy.
Click to expand...
Click to collapse
I couldn't download TERP 2.6 and hence I tried CWM (Philz recovery ) too..still It didn't work ..
Akil97 said:
I couldn't download TERP 2.6 and hence I tried CWM (Philz recovery ) too..still It didn't work ..
Click to expand...
Click to collapse
Try downloading GooManager from the Play Market, and update TWRP that way.
I've tried CWM before, but only the official version, not Philz, so I can't comment on that.
redpoint73 said:
Try downloading GooManager from the Play Market, and update TWRP that way.
I've tried CWM before, but only the official version, not Philz, so I can't comment on that.
Click to expand...
Click to collapse
Finalllyy!! 4.2.2 Works!! Thanks bro!
Akil97 said:
Finalllyy!! 4.2.2 Works!! Thanks bro!
Click to expand...
Click to collapse
You're welcome. Any case where I help somebody stay modded instead of going back to stock, is a "win" in my book!
Akil97 said:
Finalllyy!! 4.2.2 Works!! Thanks bro!
Click to expand...
Click to collapse
whats your cid man ?
i need known your cid to try update to 4.2.2
thanks
mohamadice said:
whats your cid man ?
i need known your cid to try update to 4.2.2
thanks
Click to expand...
Click to collapse
Who is your carrier
Sent from my VENOMized HoxL
Hello people! I had a problem installing CM 10.1 in my tf300t. First i try to install CM10.1 (cm-10.0.0-tf300t.zip ) with CWM. The bootloop was instantly and I try to install CM11 with TWRP but the result was the same. Sorry for my english! I wish to resolve this problem urgently.
P.D: The install was good in CM10.1 and CM11.
santipecollo said:
Hello people! I had a problem installing CM 10.1 in my tf300t. First i try to install CM10.1 (cm-10.0.0-tf300t.zip ) with CWM. The bootloop was instantly and I try to install CM11 with TWRP but the result was the same. Sorry for my english! I wish to resolve this problem urgently.
P.D: The install was good in CM10.1 and CM11.
Click to expand...
Click to collapse
CM10.1 probably requires a different bootloader than the one you are currently on and CM11 definitely requires a different bootloader and TWRP version. If you are on the Stock V10.6.1.27.1 and V10.6.1.15.3, you can follow these steps to get CM11: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
If you are on a different, older bootloader, you must upgrade by flashing the stock ROM first.
cmendonc2 said:
CM10.1 probably requires a different bootloader than the one you are currently on and CM11 definitely requires a different bootloader and TWRP version. If you are on the Stock V10.6.1.27.1 and V10.6.1.15.3, you can follow these steps to get CM11: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
If you are on a different, older bootloader, you must upgrade by flashing the stock ROM first.
Click to expand...
Click to collapse
First thanks for your quickly answer, second, how i know what is my version because i cant search it. For the cm11 i have the correct twrp version but sure i have a problem.
santipecollo said:
First thanks for your quickly answer, second, how i know what is my version because i cant search it. For the cm11 i have the correct twrp version but sure i have a problem.
Click to expand...
Click to collapse
You can find your bootloader by pressing volume down while powering on the device. It will appear in the top left corner.
cmendonc2 said:
You can find your bootloader by pressing volume down while powering on the device. It will appear in the top left corner.
Click to expand...
Click to collapse
Actually I find in CM11. What have i do? downgrade to CM10.0 and later enter in the post and then do the steps? thanks!
santipecollo said:
Actually I find in CM11. What have i do? downgrade to CM10.0 and later enter in the post and then do the steps? thanks!
Click to expand...
Click to collapse
Well it depends on your bootloader. You can only follow the steps from the post if you are on V10.6.1.27.1 or V10.6.1.15.3 or later. Nothing before that will work or CM11.
cmendonc2 said:
Well it depends on your bootloader. You can only follow the steps from the post if you are on V10.6.1.27.1 or V10.6.1.15.3 or later. Nothing before that will work or CM11.
Click to expand...
Click to collapse
I can fix it, i upgrade to CM10.0. My version is V10.4.2.19. What can i do to go CM11? Thanks for all!
santipecollo said:
I can fix it, i upgrade to CM10.0. My version is V10.4.2.19. What can i do to go CM11? Thanks for all!
Click to expand...
Click to collapse
OK so you need to flash the stock ROM, http://forum.xda-developers.com/showthread.php?t=1697227, Version: ASUS Transformer Pad TF300T Firmware: V10.6.1.27.5 for your region. Then you can follow this: http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
I have a galaxy tab2 7.0 gt-P3110
i want to instal the cyanogen nightly mod cm10.
but i only find the cm11, and this one i cant instal on my device.
is there some one that has the cm10 nightly for my device for me?
thanks
donentelo said:
I have a galaxy tab2 7.0 gt-P3110
i want to instal the cyanogen nightly mod cm10.
but i only find the cm11, and this one i cant instal on my device.
is there some one that has the cm10 nightly for my device for me?
thanks
Click to expand...
Click to collapse
What do you mean by not being able to install cm11? If you mean an error in recovery (status 7 something, I don't remember), try installing one of the recoveries here http://forum.xda-developers.com/showthread.php?t=2548257 or newest PhilZ Touch http://forum.xda-developers.com/showthread.php?t=2202667. Make sure you have the gapps package for kitkat. If you're coming from stock or another ROM, factory reset first.
putr4s said:
What do you mean by not being able to install cm11? If you mean an error in recovery (status 7 something, I don't remember), try installing one of the recoveries here http://forum.xda-developers.com/showthread.php?t=2548257 or newest PhilZ Touch http://forum.xda-developers.com/showthread.php?t=2202667. Make sure you have the gapps package for kitkat. If you're coming from stock or another ROM, factory reset first.
Click to expand...
Click to collapse
wel everytime i tryed to instal it. i says. instalation aborted.. and lost of things with capocino or something
donentelo said:
wel everytime i tryed to instal it. i says. instalation aborted.. and lost of things with capocino or something
Click to expand...
Click to collapse
Probably the status 7 error, what recovery are you using? You need a CWM 6.0.4.4 based recovery or newer to flash cm11. By the way, cm10.1.3 stable should still be available on get.cm if you want to try that.
putr4s said:
Probably the status 7 error, what recovery are you using? You need a CWM 6.0.4.4 based recovery or newer to flash cm11. By the way, cm10.1.3 stable should still be available on get.cm if you want to try that.
Click to expand...
Click to collapse
i have a older cwm. installing a new one right away.
and if i try cm10.1.3 i get the same error.
donentelo said:
i have a older cwm. installing a new one right away.
and if i try cm10.1.3 i get the same error.
Click to expand...
Click to collapse
oke i got it. the cm10.1.3 is working.
it was probaly the outdated cwm recovery.
thanks for the help
alsedfy prosper
donentelo said:
oke i got it. the cm10.1.3 is working.
it was probaly the outdated cwm recovery.
thanks for the help
Click to expand...
Click to collapse
Only one more question.
what version of the google appstore do i need to put in it?
donentelo said:
Only one more question.
what version of the google appstore do i need to put in it?
Click to expand...
Click to collapse
That comes with gapps, and it'll update itself anyway, so no worries. Again, just make sure you install the correct gapps package.
putr4s said:
That comes with gapps, and it'll update itself anyway, so no worries. Again, just make sure you install the correct gapps package.
Click to expand...
Click to collapse
oke thank you very much for helping. i think i got it now
Hello guys,
I´m using BlissPop with Metallized Kernel and after flash logo and move bootanimation and rbootanimation, my phone doesn´t boot. I can´t enter recovery or fasboot mode!!!! What can I do???, please help me.
I use bootanimation and logo from this post: http://forum.xda-developers.com/showthread.php?t=2768755&page=3#post60766600
Thanks in advance.
Hello again guys,
After read and use this gide http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 I finish with CM 11 (4.4.4) with TWRP 2.8.6.0.
I want to install CM 12S or BlissPop, preferably BlissPop but I can´t install any zip from TWRP, the flashing process always fail. Can anyone give me some advice? Or point me to a certain toolkit? I´m totally confussed right now... :S
Thanks in advance guys!!!
You need to provide more information. Exactly what error message are you getting when the zip install fails?
XDA Moderator
Transmitted via Bacon
Heisenberg said:
You need to provide more information. Exactly what error message are you getting when the zip install fails?
XDA Moderator
Transmitted via Bacon
Click to expand...
Click to collapse
Hello and thanks for your answer.
The error message that I get is "E: Error executing updater binary in zip....." the next to this message is the path where I have the Zip for the rom in my SD card. I´m totally disoriented and I don´t know how to proceed, I appreciate any more help. Thanks in advance!!!
Istvan_86 said:
Hello and thanks for your answer.
The error message that I get is "E: Error executing updater binary in zip....." the next to this message is the path where I have the Zip for the rom in my SD card. I´m totally disoriented and I don´t know how to proceed, I appreciate any more help. Thanks in advance!!!
Click to expand...
Click to collapse
Ok. Are you checking the md5 after downloading the zip to ensure that it isn't corrupt? Are you wiping properly (system, data, cache, dalvik cache) before attempting the install? Since unbricking the phone have you flashed any firmware at all or is this your first attempt?
Heisenberg said:
Ok. Are you checking the md5 after downloading the zip to ensure that it isn't corrupt? Are you wiping properly (system, data, cache, dalvik cache) before attempting the install? Since unbricking the phone have you flashed any firmware at all or is this your first attempt?
Click to expand...
Click to collapse
Hi again,
md5 checked, full wipe done and after unbrick phone I just flash CM12 nightly.
Also note that I flash BlissPop and Metallized Kernel and everything was ok until I decide to change the bootanmation, rbootanimation and logo. I try to flash the ROM with the zip that I use the first time and also try with a new downloaded zip.
Thanks and regards.
Istvan_86 said:
Hi again,
md5 checked, full wipe done and after unbrick phone I just flash CM12 nightly.
Also note that I flash BlissPop and Metallized Kernel and everything was ok until I decide to change the bootanmation, rbootanimation and logo. I try to flash the ROM with the zip that I use the first time and also try with a new downloaded zip.
Thanks and regards.
Click to expand...
Click to collapse
Ok, that information probably would have been useful in your initial post. You're messing with things that can (and obviously do) cause major problems. Flash the stock images with fastboot, see section 8 of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
After that you should be able to flash and boot a ROM again, just don't go screwing with the boot logo.
Heisenberg said:
Ok, that information probably would have been useful in your initial post. You're messing with things that can (and obviously do) cause major problems. Flash the stock images with fastboot, see section 8 of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
After that you should be able to flash and boot a ROM again, just don't go screwing with the boot logo.
Click to expand...
Click to collapse
Really thanks again, I´ll check carefully your post and post the results here. Thanks.
P.S.: I never touch any bootlogo or logo again.
Hello again Heisenberg,
I follow all the steps of section 8 of your guide and I´m on CM OS 5.0.2 and an update of 598,4 MB is downloading right now, the name is Cyanogen OS YNG1TAS17L, can I install it and then flash again my BlissPop?
Really thanks for all your help.
P.S.: Are you watching Better Call Saul? xD
Hello again,
All works like a charm and I´m on BlissPop again.
Really really thanks Heisenberg, cheers.
Istvan_86 said:
Hello again,
All works like a charm and I´m on BlissPop again.
Really really thanks Heisenberg, cheers.
Click to expand...
Click to collapse
Excellent, glad to see you're up and running again.