Related
I posted this on a forum that I thought it applied to but the one answer I got did not work, I've done searches everywhere and have not seen a solution. There were a couple of similar problems for other phones but these fixes did not work for the infuse, so . . .
I Bought the infuse on day one. Installed Kies 2.0.0.11044_11_3. Phone not recognized, installed drivers, researched and learned the truth about Kies. Phone would not be recognized but at least installing Kies made the phone visible to the PC, so I knew I could root if I so desired, read up about rooting looked over the forums, learned my phone and finally thought I was ready. The phone had other plans.
Decided the other day that I was ready to root. Plugged in the phone but it no longer showed up in my PC running Windows 7 64 bit. Something about the phones compatibility with my system changed. Tried to install a newer version of Kies 2.2.1.11053_99_3 yesterday for the drivers, reinstalled drivers, activated USB debugging, plugged the phone in started up SuperOneClick and . . . still nothing happened. So I deactivated USB debugging and started over. Followed all the directions in the root posts and and SuperOneClick threads . . .
But somehow between day one and today my Windows 7 64 bit system does not know that the phone is plugged into it.
When I plug the phone into USB the phone asks me how I want to interact with the computer, Kies (Firmware Update); Media player: Mass storage. But the computer shows nothing. Device Manager doesn't list the phone, Windows Explorer doesn't show the phone, Devices and Printers window shows everything that's connected but NOT the phone, it's as if I plugged nothing into the computer. These places don't even show unknown device. The phone is charging so I know that it's plugged in, but it doesn't seem to be communicating with the PC. I've re-booted, re-installed, reviewed, rewired and re-alized that I have no clue what happened. (Tried different cables, different USB ports different times of the day)
It worked once upon a time, I tried rolling back restore points and disabling my kaspersky 2011, I've followed all rooting instructions in these threads to no avail.
Thinking about restoring phone to factory settings as a last resort. Got this reply in another thread (sorry about posting multiple threads, but I'm at wit's end.):
Try removing all instances of the Infuse coming in contact with your system using USBDeView. Also, how does it look in Disk Management? (Start button > search for "Computer Management" > Storage > Disk Management) Does the Infuse show up there as removable storage?
My answer: Tried it, didn't work, oh wait, didn't run USBDeView as administrator, re-tried as administrator and uninstalled all instances of Samsung i-997, then tried to plug the phone back in and still nothing.
Also not in Computer Management or Device manager either. Is there a way to uninstall any drivers that I have and then re-install them?
I did a factory reset, plugged the phone in and still nothing. Had to spend two days re-installing apps and re-configuring launchers . . .
I am now ready to hurl my phone out into traffic to see if that will help, but before I do I'm hoping someone here may have the answer I need.
. . . please . . .
If you are trying to root super one click will work. It worked on my infuse. First see if you can connect using mass storage. If you can access the files on your phone you are good. On win 7 64 bit it should just pop up to view the files. After that unmount and unplug the cable. Enable USB debugging and reconnect. Run super one click and it should work. Not every time does super one click work on the first run. I believe I had to unplug and reconnect a second time for it to work. But I did use super one click to root my phone. I was also using the drivers for the captivate at the time. If you need more help let me know.
Sent from my SAMSUNG-SGH-I997 using XDA App
FYI, drivers are NOT needed for USB mass storage, just to be clear.
Thanks for the reply, but that didn't work. I tried it exactly as you stated but it didn't "pop up" I ran SOC anyway and it got hung up "Waiting for device..." And a dos prompt window opened and just hung there.
SuperOneClick v1.9.5.0
Checking drivers...
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
When I closed the Dos Prompt window it asked me if I was running OS 2.0 or higher. Wether I click yes or no I get this message:
OK
Getting OS Version...
Pushing psneuter...
error: device not found
FAILED
Thanks for the try, but still At wit's end . . .
it mattters
at least for me (win7 64bit) mass storage mode DOES require drivers. Or else PC just tries to load both SD cards as external drives. I had a hell of a time getting my laptop to recognize the phone. What worked for me was I ended up installing both kies and kies mini. when neither of those worked i tried the Samsung pcl connect and that didnt work. There was a link on the ATT site for usb drivers for it. A combination of both the samsung pc connect drivers and the ATT USB driver works for me. Must be something to do with win7 recognizing it as an MP3 player when in music mode and a EXT drive when is mass storage.
socialal said:
at least for me (win7 64bit) mass storage mode DOES require drivers. Or else PC just tries to load both SD cards as external drives. I had a hell of a time getting my laptop to recognize the phone. What worked for me was I ended up installing both kies and kies mini. when neither of those worked i tried the Samsung pcl connect and that didnt work. There was a link on the ATT site for usb drivers for it. A combination of both the samsung pc connect drivers and the ATT USB driver works for me. Must be something to do with win7 recognizing it as an MP3 player when in music mode and a EXT drive when is mass storage.
Click to expand...
Click to collapse
You just contradicted yourself there. The phone's SD cards appearing as external drives IS mass storage mode. Mass storage mode does not require drivers.
Appearing as an MP3 player uses the MTP protocol, which is NOT Mass Storage mode, which is why it does require drivers.
ADB also requires drivers.
http://www.samsung.com/us/support/downloads/SGH-I997ZKAATT
Thanks, but same problem. After installing these drivers, the phone just doesn't show when plugged in. The next thing is to find a Samsung store (or AT&T store) and see if there's something wrong with the phone's usb port.
Definitely one advantage of picking your phone up at a store... if possible.
My CSR played with the phone on the computer for 10 min., said he was transferring sim contacts.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
i am having same problems
for the past year i have had a captivate and i have flashed it probably with every rom made by every developer here. i have flashed kernals modems you name it i have done it the phone was incredible i never had one problem till i got the infuse when i first got the phone i rooted it and had a lot of problems but after 5 or 6 hrs i finally was successful. i then could not get the phone to connect to my win 7 pc i then took out the mem card and put my roms on that then transfer them to my phone flash ect but to this day i can not get the pc to transfer files through usb. when i hook the phone up the drives show up but are faint then i connect usb on phone the drives become bold but when i try to transfer files or open drive in explorer the computer lags and the green bar slowly goes across the bar get to the almost end and locks up. my main concern is that there might be something wrong with the phone. at this point i cant even odin it back to factory. from what i have read it is more of a common problem than just one or two people. please help?
ps just flashed maxq-kk2-b10 and it rocks !!
Yeah I have all of the same problems. It must be this phone just has crap drivers.
Sometimes I get the PC to recognize the phone once. Then if I disconnect the phone for some reason then reconnect it is no longer recognized. I need to reboot the computer to get it to be recognized.
I have just come to the conclusion that Samsung's PC drivers are total rubbish for this phone.
Hi!
I have the same problem. I tried connect my infuse to 5 differend PC, with different cables, different OS, but still NOTHING. PC just didn`t know that phone is connected. As a result I can`t reflash it with ODIN or CWM, because for install CWM I need make root first, but Superoneclick didn`t see the phone also.
There is some way to make root on this phone WITHOUT connection to PC ?
try getting a new data cable, the charging part of the cable may still work but the data transfer part may have stopped working-(happened with my dads Atrix 4G after buying a new data cable for $6 at walmart the computer once again recognized it)
so go to your store of preference that sells electronic cables
buy a new data/charging cable-***MAKE SURE IT SAYS SOMETHING ABOUT DATA TRANSFER OR FILE TRANSFER!!!***
shouldn't cost more than $10 depending where you go-like i said my dad got one for $6 and his phone uses the same cable as my infuse...i think all smart phones use the same cable actually.
mg2195 said:
try getting a new data cable, the charging part of the cable may still work but the data transfer part may have stopped working-(happened with my dads Atrix 4G after buying a new data cable for $6 at walmart the computer once again recognized it)
so go to your store of preference that sells electronic cables
buy a new data/charging cable-***MAKE SURE IT SAYS SOMETHING ABOUT DATA TRANSFER OR FILE TRANSFER!!!***
shouldn't cost more than $10 depending where you go-like i said my dad got one for $6 and his phone uses the same cable as my infuse...i think all smart phones use the same cable actually.
Click to expand...
Click to collapse
This is 100% not data cable problem. not driver problem and not PC problem.
I am sure, because I have 2 Infuse and one of them work fine with the same stuff. This is something wrong with the phone hardware or software.
How can I root INFUSE without PC? There is some *.apk or scripts ?
Hi,
Quick background: Former sys admin with some Unix experience. Already own a Toshiba Thrive rooted with CWM. Gave that to the wife and got me the GT 7+. Read the forum here prior to buying. Rooted on day one.
Stats: GT-P6210 Build: HTJ85B.UEKL1 P6210UEKL1
PC: Windows 7 21 Bit Enterprise SP1
Kies: Kies_2.1.1.11124_17_6
Later on the first day, after installing aps, I installed latest version of Kies and plugged it in with the supplied usb cable in order to transfer some files to my Sandisk 32Gb microsd. Kies already running and debugging off as per the instructions. Results: Tab plays a notice and I see the MTP connected icon. My pc does NOTHING. No sound, no notice, Kies does nothing.
I unplugged and tried the other 3 ports. 2nd port gives me same result and on the 3 & 4 port I lose the tab's MTP notice and it begins charging.
So, this is what I have done in order:
1. Re-installed Kies--->same result. No MTP notice on tab.
2. Debugging on--->same
3. Tried in on my room mate's W7 machine---> Alas! I get a driver installation and I am able to see both drives. I quickly unplugged and thanked him.
4. Cleaned my pc by:
a. Deleting all USB controllers
b. Deleting all USB installations on registry (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSBSTOR)
c. CCLEANER the whole system.
d. Turn off. Pull off battery. Press power button to drain motherboard.
e. Restart and re-install USB controllers.
f. Restart again.
5. Plug in again--->Tab plays a notice and I see the MTP connected icon. My pc does NOTHING. No sound, no notice, Kies does nothing.
6. Pull my hair, bang my head, wished I would have kept the Thrive. (just plug, and drag and drop)
Left it plugged to the pc overnight. Next morning I see the found new device on systray and it is trying to find drivers. I quickly open Kies and see some activity as it tries to connect. and after a few seconds, it stops. Result: No drivers installed, no Kies recognition, no drive letters, nothing.
8. At this point I ask my room mate to let me plug in on his pc to see if he still sees it and nothing happens on his pc.
9. I wipe the table back to stock.--->Tab plays a notice and I see the MTP connected icon. My pc does NOTHING. No sound, no notice, Kies does nothing. Then after I tried other ports, it begins charging and I lose the MTP notice.
10. I re-roo,t reconfigure the beast, and do a backup. Tablet is running smooth as silk, but it never connects. This all happened in the last three days.
11. Last thing I did, as I am writing this with the tablet plugged in to the pc and MTP notice on, was to un-mount the microsd and remount. MTP re-initializes and it does nothing.
I may be suspecting a cable and unfortunately, I am in no position to get my hands on another one in a timely manner. At this point, I could reflash back to a stock firmware, send back to amazon and wait for another one to come in three to four weeks (I am deployed to a remote area) and I just don't want to do that.
The tab runs great. Love the size and speed. I guess I can continue taking out the microsd card out every time I want to add a file, but I am afraid that it may eventually end up ruining the card and possibly the tablet.
Please help. I have scoured the internet, but all I ever find is solutions that I already have tried.
Thanks in advance,
Sal
you could use adb over wifi.. There are a few apps in the market for this. Does adb recognize the tab when its plugged in via USB?
Also try Android commander, it is a GUI based adb server, you should be able to navigate to sdcard/extstorages/ and your external card should be there
Sent from my HTC Glacier using Tapatalk
You could also use a file explorer like Root Explorer and Dropbox to transfer files back and forth.
Have you tried a different USB port on the PC? like one round the back.
Also, try without the sdcard in.
Ticked/unticked USB development/debugging on the tablet?
If it works on another computer though it would suggest its your own PC which has the problem, not the tablet.
tried with Linux on the same PC?
Does Odin see the tablet when in download mode?
if you have clockwork mod recovery, doesn't that have a USB mount option ? It does on my gs 2. My tab isn't with me to check.
Oh and kies has an option to reinstall the driver. Did you try with the older version of kies again?
Sent from my GT-I9100 using xda premium
ringnutz said:
you could use adb over wifi.. There are a few apps in the market for this. Does adb recognize the tab when its plugged in via USB?
Also try Android commander, it is a GUI based adb server, you should be able to navigate to sdcard/extstorages/ and your external card should be there
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
I'll try adb. I will install it and see if how it works. Time is tight so I will report later.
Sal
crunchie-uk said:
Have you tried a different USB port on the PC? like one round the back.
Also, try without the sdcard in.
Ticked/unticked USB development/debugging on the tablet?
If it works on another computer though it would suggest its your own PC which has the problem, not the tablet.
tried with Linux on the same PC?
Does Odin see the tablet when in download mode?
if you have clockwork mod recovery, doesn't that have a USB mount option ? It does on my gs 2. My tab isn't with me to check.
Oh and kies has an option to reinstall the driver. Did you try with the older version of kies again?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have done all that you mentioned with the exception of Linux and Odin. I am not going to get into Linux as that would start a whole other project. I will install ADB to see if I can force the drivers.
I just tried the CWM mount USB mount but get "E: Unable to open ums lunfile (No such file or directory)"
Also, on my friend's pc worked once but not after that.
I will continue to explore the ODIN suggestion.
Thanks,
Sal
chad_k69 said:
You could also use a file explorer like Root Explorer and Dropbox to transfer files back and forth.
Click to expand...
Click to collapse
I use ES Explorer (wonderful app!) now. My end-state is not to have to remove the card every time I transfer a file.
Sal
EDIT: Sorry, I see now the dropbox suggestion. Yes that would work for smaller files, but I am not sure that dropbox can handle movie size files. It would be a last resort solution.
Thanks,
Sal
Adb is probably going to be your best bet. It can be a pain to set up at times, but in the long run is a must have for any Android device. Kies normally installs the drivers that adb uses, so hopefully you can get them to install. If it still doesn't work I would suggest swapping it out for a new tab, as much as that sucks. If you need help, I constantly check these forums, so I should be able to provide some support
Sent from my HTC Glacier using Tapatalk
ringnutz said:
Adb is probably going to be your best bet. It can be a pain to set up at times, but in the long run is a must have for any Android device. Kies normally installs the drivers that adb uses, so hopefully you can get them to install. If it still doesn't work I would suggest swapping it out for a new tab, as much as that sucks. If you need help, I constantly check these forums, so I should be able to provide some support
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
Well, got ADB installed and running. Set the path and ran it. Plug the tab with debugging clicked on, and got "MTP connected" on the tab's screen. At this point I am excited since I never seen the "MTP connected " on debug mode. I typed the "adb devices" command and got "List of devices attached" ___________________.
Yep, blank. Obviously the pc is not seeing it. My conclusions are the following:
1. Bad cable
2. Bad device
The fact that it recognized once on my room mates' pc and then none at all, and the fact that it was recognized on my pc for a brief random time, then it means that the device can't handshake with the motherboard and thus is a communication issue.
I'll try my luck with Samsung tech support and see if they can replace the cable.
Just thought of something, would installing Windows XP Mode under a Windows Virtual PC recognize new devices or just feed from the Windows 7 library?
Sal
saldman said:
Well, got ADB installed and running. Set the path and ran it. Plug the tab with debugging clicked on, and got "MTP connected" on the tab's screen. At this point I am excited since I never seen the "MTP connected " on debug mode. I typed the "adb devices" command and got "List of devices attached" ___________________.
Yep, blank. Obviously the pc is not seeing it. My conclusions are the following:
1. Bad cable
2. Bad device
The fact that it recognized once on my room mates' pc and then none at all, and the fact that it was recognized on my pc for a brief random time, then it means that the device can't handshake with the motherboard and thus is a communication issue.
I'll try my luck with Samsung tech support and see if they can replace the cable.
Just thought of something, would installing Windows XP Mode under a Windows Virtual PC recognize new devices or just feed from the Windows 7 library?
Sal
Click to expand...
Click to collapse
Hmm, that is strange.. I was new to samsungs and when I tried to root it it took me a while because I didn't know that kies installed the drivers. After I installed it though adb devices showed my tab connected...
Sent from my HTC Glacier using Tapatalk
You still haven't tried Odin in download mode though.it could just be a bad flash
Sent from my GT-P6210 using xda premium
crunchie-uk said:
You still haven't tried Odin in download mode though.it could just be a bad flash
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
I placed the tab on download mode and queried it from adb and got nothing. I then queried it via ODIN3 and got no response as well.
I have come to terms that it has to be the device or the USB cable. Just ordered two (yes, two) different type cables to test out the theory. If they don't do it, then I am sending the tab back to Amazon.
It takes about a week to get stuff shipped where I am at so I'll check in later and report.
Sal
Just an update.
I bought a cheap cable from Amazon for $ 3.31 US to test the cable theory and guess what? It worked.
Curse you Samsung for your lack of QC with your cables. I have read throughout most of the forums (not just this one) and it seems that cables for these devices are notoriously finicky.
While on the one hand, I am glad that I got a cable that works, Samsung owes me over thirty hours of my life that I had to spend on troubleshooting a brand new device.
The part that I hate the most is that when I tried to contact Samsung's tech support, all they kept telling me is that it must be my pc even after I told them all the troubleshooting that I had done. Yes, they played the blame game.
My Toshiba Thrive worked right out of the box with a standard micro usb cable.
Ok. Rant off.
Sal
Glad to hear you got it working. Personally I have a ftp server set up on my comp that I use to transfer files back and forth. Much easier IMO than having a cable every time I need something transferred
Sent from my HTC Glacier using Tapatalk
Hi all. I have a unique problem here... not sure if it's a software of hardware issuse. Maybe you can help me out.
My phone can read all storage space while I am in the operating system. Internal storage reports as 2.34GB, SD card (also internal) reports as 9.92GB. I have no problems copying, reading, and deleting files using "es explorer" or transfering files via various wifi file tansfer programs back and forth with my desktop.
The problem lies with the fact that I cannot use the USB port at all except to charge. Even in HBOOT the computer doesn't read it! For example, if I connect the phone to the computer while it is in HBOOT and select FASTBOOT, I do not see "FASTBOOT USB", it just remains as FASTBOOT. ADB from my computer cannot detect the phone either. I have tried all my USB ports, installed HTC USB drivers, Android SDK (and associated USB driver package), tried a different computer, tried 4 different USB cables, but none of this works.
What is strange is that yesterday the phone suddenly worked via USB! I was amazed that after 2 months of it not working it just randomly started again, but figured I did something random to make it work. Then I unplugged it and then re-plugged it and now it doesn't work again... Absolutely awkward, I hope someone can help me at least identify what the problem is!
I'm currently using the latest Cyanogen 10.1 mod (March 12th), have it unlocked, and am using CWM 5.3.6. I would really appreciate any insight or help, thanks so much in advance.
OMG now it's working again. A constant factor seems to be the use of "AirDroid"... Whenever it is open and transfering the SDCard becomes recognizable and the computer can connect... Very awkward... any ideas as to the issue?
I'm scared to touch anything on it. It's transferring some music via USB.
Now I unplugged it from my computer and the re-plugged it back in and it no longer recognizes my SDCard at all... What is going on? It seems like a software issue but what could it be?
Well now it works. I plugged it in and nothing happened so I walked away. When I came back it was asking to turn on USB mode! I wasn't using any wireless wifi transfer programs, it was just in regular home screen mode and that's all... it just decided to work... huh. This appears to be random but it can't be... there must be some reason.
Well it's still working, but I haven`t unplugged it yet. The phone rebooted itself mid-transfer for some reason, but it still can be used as a USB drive. It seems that after I had begun using the internal SDCard to store stuff on (first via wifi transfer) it has become more "recognizable" through the USB connection... Could there be something wrong with the internal SDCard itself and not the USB connection? Can I reformat it to start with a clean slate?
Like right now my card is using 90% of it's storage... and it's been more recognizable now than ever before... I used to keep it at about 10-15% usage...
Okay, now after I have transferred a bunch of songs and movies to the SDCard, I rebooted the device with the USB cable still in and now it isn't recognized at all. I changed absolutely nothing; the phone was in USB mode being able to transfer files back and forth, then I rebooted and all of a sudden the USB mode doesn't work again... Not even recognized... no ADB recognition... no Windows recognition... nothing. So strange! What could be the problem?
Well it looks like it was my actual computer. I am connecting flawlessy in USB mode to the phone with my Dads computer. I guess I have to get a new motherboard as Ive always suspected mine was on its way out.
SOLVED
Looks like the issue has been solved. After having tried many different computers, it seems as if certain computers have success with reading and recognizing the HTC than others. For example,
My personal computer: Works rarely
My Dads: Works flawlessly everytime.
My Garndmas: Works intermittently (better than my personal one)
My Moms: Works flawlessly
Now I just wonder why some USB ports work and others dont! Any ideas?
Neurotical said:
Looks like the issue has been solved. After having tried many different computers, it seems as if certain computers have success with reading and recognizing the HTC than others. For example,
My personal computer: Works rarely
My Dads: Works flawlessly everytime.
My Garndmas: Works intermittently (better than my personal one)
My Moms: Works flawlessly
Now I just wonder why some USB ports work and others dont! Any ideas?
Click to expand...
Click to collapse
hey im facing the same problem suddenly my ph. is not connecting to my computer not even mount storage.
When goes to "mount usb" in recovery - give it few min. Do not ask me why, but every time I am in recovery and want to mount the usb, I have to wait 3-4 min and the will connect.
thanx
liesnomore said:
When goes to "mount usb" in recovery - give it few min. Do not ask me why, but every time I am in recovery and want to mount the usb, I have to wait 3-4 min and the will connect.
Click to expand...
Click to collapse
i will try that thank you very much hope it will work nd then later it will connect to the pc in fasboot mode(fastboot usb) or not?
thanx
liesnomore said:
When goes to "mount usb" in recovery - give it few min. Do not ask me why, but every time I am in recovery and want to mount the usb, I have to wait 3-4 min and the will connect.
Click to expand...
Click to collapse
but its not connecting in fastboot mode (fastboot usb)
Guys-
In a quandry - I should have rooted a couple months ago. I cannot get my Charge to recogize a USB connection with the comptuter. Computer recognizes something is trying to connect but computer gives me a USB Device Not Recognized message. It charges the phone when connected to the computer but doesn't ask me how I want to use the phone (as a mass storage device or media player) any more.
To make a long story short, I have tried everything - different USB cables, different USB ports, different computers, USB debug on and off, Ask on Connection and Mass Storage settings on and off. Have even gone thru several master resets of the phone and still will not recognize a computer connection.
Would love to root and hold on to this thing for at least a little longer, so my last thought is to ask if it's possible to root this device without a computer connection. From what I've read through on some other forum threads it's possible with some phones. I'm hoping this one can manage it.
Thanks, in advance.
While I'm certainly no expert, I am pretty sure its impossible to do what you're asking.
Sent from my GT-N5110 using XDA Premium HD app
Yep, it's no HTC, so you need a computer to flash the custom recovery.
Sent from my Rezound using Tapatalk 4
Your computer is seeing something. Sure seems like a driver problem. What os is your computer running?
Sent from my SCH-I510 using xda app-developers app
elvisruns2000 said:
Guys-
In a quandry - I should have rooted a couple months ago. I cannot get my Charge to recogize a USB connection with the comptuter. Computer recognizes something is trying to connect but computer gives me a USB Device Not Recognized message. It charges the phone when connected to the computer but doesn't ask me how I want to use the phone (as a mass storage device or media player) any more.
To make a long story short, I have tried everything - different USB cables, different USB ports, different computers, USB debug on and off, Ask on Connection and Mass Storage settings on and off. Have even gone thru several master resets of the phone and still will not recognize a computer connection.
Would love to root and hold on to this thing for at least a little longer, so my last thought is to ask if it's possible to root this device without a computer connection. From what I've read through on some other forum threads it's possible with some phones. I'm hoping this one can manage it.
Thanks, in advance.
Click to expand...
Click to collapse
I would make sure that you have the appropriate drivers installed first.
jco23 said:
I would make sure that you have the appropriate drivers installed first.
Click to expand...
Click to collapse
Drivers not necessary. I was able to plug into, and connect with, no less than four different computers at work and home on a regular basis for approx. 1 yr 10 months without ever having to install a driver, and I am quite sure that they didn't just download automatically (never saw that happen). Now I need one?
Operating systems on the computers have been Win XP, Win 7 Home and Win 7 Pro.
I suspect that its a physical issue inside the micro USB port in the phone thats the issue since no one has any other solutions.
elvisruns2000 said:
Drivers not necessary. I was able to plug into, and connect with, no less than four different computers at work and home on a regular basis for approx. 1 yr 10 months without ever having to install a driver, and I am quite sure that they didn't just download automatically (never saw that happen). Now I need one?
Operating systems on the computers have been Win XP, Win 7 Home and Win 7 Pro.
I suspect that its a physical issue inside the micro USB port in the phone thats the issue since no one has any other solutions.
Click to expand...
Click to collapse
perhaps you already the drivers and now there has been update. just saying, won't hurt until you try it. computers can be finicky that way sometimes.
For what it is worth, here are my steps:
phone settings: USB debugging enabled; ask on connection (when connected, place phone in "mass storage")
PC settings: download/install all samsung drivers applicable with this phone; reboot computer; use OEM cable only
then, follow steps from the rooting thread.
also, do you have an SDcard? if not, that could be an/the issue (either you need one, or the one you have is corrupted). often times, my computer will ask me to repair my sdcard - I usually hit no. after plugging it in, give it at least 5 minutes to secure a connection.
hope this helps.
I know that I had to, for whatever reason, manually download & install the drivers for my Win7 system before I could fully connect my phone to computer. Had similar issues with Motorola phones and ASUS T300T tablet. Windows always works? Not in my experience and I do this for a living (computers). :banghead:
Sent from my SCH-I510 using xda app-developers app
Sorry guys - I've tried all of that. With SD card in, with it out, with battery in, battery out, sim card in/out. Literally every variant.
And the great thing is - show stopper here - I went to the Samsung website to download a driver a few weeks back, and the driver does not install correctly!! It just won't install - poops out somewhere (driver not installed properly message). Tried this on one Win 7 computer and one with XP. With firewalls on and off. It's like Samsung doesn't have their you-know-what together.
Heimdall isn't seeing it. Android file transfer will open, but it'll tell me to restart my device. Odin won't detect it. Jodin won't detect it. I even borrowed a friend's PC to test it, and it didn't see it. What's the deal? Thanks!
trevonator126 said:
Heimdall isn't seeing it. Android file transfer will open, but it'll tell me to restart my device. Odin won't detect it. Jodin won't detect it. I even borrowed a friend's PC to test it, and it didn't see it. What's the deal? Thanks!
Click to expand...
Click to collapse
It used to be that a mac would not see a GS3 unless android debugging was on. However somewhere along the way that work around seemed to break as well. I don't typically use my old mac laptop anymore, however the last time I plugged my GS3 into it I could not get it to mount as a camera, or as a media device.
I did not test using adb and thus adb push, however that would probably work if you properly configured adb on the mac. I actually used bluetooth file transfer to move data from the mac to the phone the last time as a work around...
muiriddin said:
It used to be that a mac would not see a GS3 unless android debugging was on. However somewhere along the way that work around seemed to break as well. I don't typically use my old mac laptop anymore, however the last time I plugged my GS3 into it I could not get it to mount as a camera, or as a media device.
I did not test using adb and thus adb push, however that would probably work if you properly configured adb on the mac. I actually used bluetooth file transfer to move data from the mac to the phone the last time as a work around...
Click to expand...
Click to collapse
Dang. It wouldn't work on my friend's PC either though.
muiriddin said:
It used to be that a mac would not see a GS3 unless android debugging was on. However somewhere along the way that work around seemed to break as well. I don't typically use my old mac laptop anymore, however the last time I plugged my GS3 into it I could not get it to mount as a camera, or as a media device.
I did not test using adb and thus adb push, however that would probably work if you properly configured adb on the mac. I actually used bluetooth file transfer to move data from the mac to the phone the last time as a work around...
Click to expand...
Click to collapse
Samsung Kies seemed to work to download the drivers. After that, it's smooth sailing with Heimdall.
trevonator126 said:
Heimdall isn't seeing it. Android file transfer will open, but it'll tell me to restart my device. Odin won't detect it. Jodin won't detect it. I even borrowed a friend's PC to test it, and it didn't see it. What's the deal? Thanks!
Click to expand...
Click to collapse
maybe MTP mode vs the P?? (camera?) mode
Sent from my ASUS Transformer Pad TF700T using XDA Free mobile app