Many guys brick there fone while flashing some rom or upgrading or downgrading to different android versions......
But unbricking a SOFT BRICKED canvas 2 is not a big deal.....
Just follow these steps..
FIRST METHOD
1.Download the following zip file from here
and boot into recovery mode by pressing volume up+volume down+power buttons simultaneously.
2.Now select format data/wipe delvic cache and also wipe cache partition. Go to advanced and wipe delvic cache.
3.Now place the above zip file in ur fones sd card( u may use a memory card reader or another fone for connecting ur memory card wid pc)
4.Go to mounts and storage and select mount sd card select format system.
5.Then go back and select install zip from sd card>choose from sd card and select the above downloaded zip file.
6.After installation completes go back and select reboot system now.
IF U R STILL STUCK AT BOOT LOGO THEN GO FOR THE SECOND METHOD OR OTHERWISE ENJOY AS UR FONE IS BACK TO LIFE AGAIN.
SECOND METHOD
1.First of all download and extract the following file to any specified folder........
A.STOCK JELLYBEAN.RAR
B.SP FLASH TOOLS
*************THE PASSWORD OF SP FLASH TOOLS IS "[email protected]" (without quotation marks)****************
2.now remove ur fone's battery and keep it aside.
3.go to the folder where u have extracted sp flash tools. Run it as administration.
4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
6.connect ur fone to pc.
Let the process complete. After it completes reinsert the battery and switch on ur fone.
And wid this u should have successfully unbricked ur fone..
Note:U will observe dat ur fone is unrooted again and cwm or twrp recovery has been replaced by stock recovery.
hit thx if i helped...
this is not for unbricking its simple getting out of bootloop , a bricked phone cant be turned on. bricked simply means a phone becomes a brick and shall be used in some wall and cemented lol..
P.S the second method can be used on mtk devices if they get bricked, probably by removing battery and just connecting the USB cable to phone and keepingSPflash on it will detect and flash .
I know dat a bricked fone cant be turned on but instead of making two different threads of getting out of bootloop and unbricking i combined them into one.
Moreover many newbies simply use the term 'brick' instead of searching bootloops....
Thanks for this guide very helpfull
Sent from my Micromax A110 using xda app-developers app
nice tut
Thanks man very important thead :good:
If u are unable to proceed in second method i.e. if sp flash tools is not detecting ur fone den follow this thread to successfully install proper drivers..
Link: http://forum.xda-developers.com/showthread.php?t=2370906
Link absent
in the first method the link u have given doesnt exist anymore......can u plz post some other link...my phone is bricked n i need to unbrick it urgently....:crying:
shrimufc7126 said:
in the first method the link u have given doesnt exist anymore......can u plz post some other link...my phone is bricked n i need to unbrick it urgently....:crying:
Click to expand...
Click to collapse
buddy the link is not dead....in fact i am unable to open any dev-host link.
but dont not worry ....i am currently uploading rom to another file hosting site. will give you link as soon as it is uploaded.
[email protected] said:
buddy the link is not dead....in fact i am unable to open any dev-host link.
but dont not worry ....i am currently uploading rom to another file hosting site. will give you link as soon as it is uploaded.
Click to expand...
Click to collapse
Hey bro... plz upload d new link....
Good thread!
But just want to tell all users that it is always recommended to do a nandroid backup before flashing any mods, ROM's or anything.
That way, You have handy way to restore phone from soft bricks and even prevent all you data loss.
Method 1 described here, wipes data. I soft bricked my handset yesterday, while applying a framework patch! But instead of flashing the whole ROM again, i restored my backup which i took just before flashing that patch, and everything were in place, just as before!
Hope this will help!
Hmm...that's a good way. Restoring backups even restore your data. So there is no data loss even.:thumbup:
But my method described the case when a newbie has not taken any preventive steps and simply has bricked his phone ( soft bricked).
[email protected] said:
Hmm...that's a good way. Restoring backups even restore your data. So there is no data loss even.:thumbup:
But my method described the case when a newbie has not taken any preventive steps and simply has bricked his phone ( soft bricked).
Click to expand...
Click to collapse
yaa...thats what i did...i did not take a backup....now m screwed...please help
shrimufc7126 said:
yaa...thats what i did...i did not take a backup....now m screwed...please help
Click to expand...
Click to collapse
Bro please check your private message.
1) First perform an uninstall of the MMX/Mobistel drivers you already have on*
your P.C. Install the drivers again.*
2) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM.*un-tick*all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click “Firmware-upgrade, Download.
3) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
4) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
5) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app
dhrtlockeroo9 said:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on*
your P.C. Install the drivers again.*
2) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM.*un-tick*all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click “Firmware-upgrade, Download.
3) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
4) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
5) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Good... but i don't think there is any need to uninstall drivers.
Maybe its need to uninstall to drivers smtimes driver doesn't install properly..bcoz if there miss any DLL file of windows its work bt nt perfectly n u never think its driver problem..!
Is there any possible way to hard brick my phone, i know u wud be wondering to see this post, but what i do, i have already created a thread in genera section about the prob of dust under screen after a mmx sc touch repair, if i hard brick my phone n give it to them, i am sure they won't be able to make it alive and if i continuously stay in there touch then may i get a new phone
Sent from my GT-I9500 using xda app-developers app
rohit297 said:
Is there any possible way to hard brick my phone, i know u wud be wondering to see this post, but what i do, i have already created a thread in genera section about the prob of dust under screen after a mmx sc touch repair, if i hard brick my phone n give it to them, i am sure they won't be able to make it alive and if i continuously stay in there touch then may i get a new phone
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
They'll probably tell you that board needs replacement, then you will be left with no choice.
Sent from my Micromax A110 using xda app-developers app
rohit297 said:
Is there any possible way to hard brick my phone, i know u wud be wondering to see this post, but what i do, i have already created a thread in genera section about the prob of dust under screen after a mmx sc touch repair, if i hard brick my phone n give it to them, i am sure they won't be able to make it alive and if i continuously stay in there touch then may i get a new phone
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Yup.... don't be sooo overconfident that you will surly get a new phone.
If in case they proves that you are responsible for the faults and errors than you will get a new phone but from market after paying for it.
dhrtlockeroo9 said:
1) First perform an uninstall of the MMX/Mobistel drivers you already have on*
your P.C. Install the drivers again.*
2) On the PC/Laptop, start SP flash tool and select the right scatter from the factory stock A110 ROM.*un-tick*all except the first five (Preloader, DSP_BL, MBR, EBR1, UBOOT) + CWM recovery (You should have replaced default recovery with CWM recovery in the ROM folder). Click “Firmware-upgrade, Download.
3) With battery taken off from your phone connect it to the PC/Lap using the USB cable.
4) If your battery was having good charge when you were bricked, you can now power on to recovery mode and flash your CWM saved ROM or any other ROM.
5) If your battery was low, when you were bricked, leave it to charge for an hour before attempting to flash the entire stock ROM through SP flash or CWM.
Sent from my Micromax A110 (Canvas 2) using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks a lot. saved my phone
Related
actully one system file of my mobile is deleted
file name is android.policy.jar which is located in system\framework
thats why my mobile is start but online showing htc screen
my mobile is at&t htc one x
my mobile is already rooted and recovery mode is start
and usb debugging mode of my mobile is off
how can i paste a android.policy.jar file paste in my system or there is if any option to flash my mobile or any other way to repair my mobile than plz help me
Do you have custom recovery?? If so tou could just download a rom and reflash your phone.
Sent from my EVO using xda premium
..
i downloaded rhe rom bt when i connect my mobile to pc it only showing internal storage like system folder etc bt not sdcard because mobile is not starting so how can i flash my mobile....
can its possible to place rom in internal storage and flash ...or there is the any other way to flash it....
rahulpk7up said:
i downloaded rhe rom bt when i connect my mobile to pc it only showing internal storage like system folder etc bt not sdcard because mobile is not starting so how can i flash my mobile....
can its possible to place rom in internal storage and flash ...or there is the any other way to flash it....
Click to expand...
Click to collapse
Hey!
Reboot In to Bootloader and perfrom a factory data reset (to enter bootloader hold power and the volume down key until u see a screen)
OR
I am taking under belief that you phone is rooted if not then just search for how to root one x and u'll find MANY MANY Tutorials lol
Personally The Easiest method in my view is by using hasoon's All In One Toolkit for the One X BEST AND EASY
After Rooting Flash ClockWork Recovery MOD Then After entering recovery just go to mounts and mount USB And Volia U'll find all your data on the PC Just Like SD Card Then Copy your stuff Just to be safe and then copy the ROM on to the SD
Unmont the USB Storage And Flash the ROM by selecting the ZIP file u copied
...
AshishKumar1 said:
Hey!
Reboot In to Bootloader and perfrom a factory data reset (to enter bootloader hold power and the volume down key until u see a screen)
OR
I am taking under belief that you phone is rooted if not then just search for how to root one x and u'll find MANY MANY Tutorials lol
Personally The Easiest method in my view is by using hasoon's All In One Toolkit for the One X BEST AND EASY
After Rooting Flash ClockWork Recovery MOD Then After entering recovery just go to mounts and mount USB And Volia U'll find all your data on the PC Just Like SD Card Then Copy your stuff Just to be safe and then copy the ROM on to the SD
Unmont the USB Storage And Flash the ROM by selecting the ZIP file u copied
Click to expand...
Click to collapse
my mobile is already rooted bt when i connect my mobile than it not show any storege i used the androidcommander.exe to see thw files bt tbere only system file are showing and sdcard not showing......my mobile is started bt after htc screen home acreen not come thats why i m not able to do anything in mobile.....so how can i paste rom .zip in my mobile and flash it...
rahulpk7up said:
my mobile is already rooted bt when i connect my mobile than it not show any storege i used the androidcommander.exe to see thw files bt tbere only system file are showing and sdcard not showing......my mobile is started bt after htc screen home acreen not come thats why i m not able to do anything in mobile.....so how can i paste rom .zip in my mobile and flash it...
Click to expand...
Click to collapse
You have to flash a custom recovery and use the custom recovery to flash the ROM
Sent from my Galaxy Nexus using xda app-developers app
rahulpk7up said:
my mobile is already rooted bt when i connect my mobile than it not show any storege i used the androidcommander.exe to see thw files bt tbere only system file are showing and sdcard not showing......my mobile is started bt after htc screen home acreen not come thats why i m not able to do anything in mobile.....so how can i paste rom .zip in my mobile and flash it...
Click to expand...
Click to collapse
Rahul Have u tried a Factory Reset Via the Bootloader (http://www.flickr.com/photos/robertwebbe/7050765051/)
Has that Worked ???
If Not
As I Told u Flash Custom Recovery Via Hasoons All In one Tool Kit (http://forum.xda-developers.com/showthread.php?t=1604439)
For How to Flash U first need to be in Fastboot mode then connect the phone to ur pc and in that toolkit its clearly given Flash Custom Recover When u See it It'll be Easy
After than Boot into recover Then select mounts option and click on mount USB Storage And ur SD card will popup Then Copy the NEW ROM and Flash it :laugh::laugh::laugh::laugh:
I Hope This Helps
...
Sparx639 said:
You have to flash a custom recovery and use the custom recovery to flash the ROM
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
thanx you bt can you plz tell me how to flash a custom recovery and how to use custom recovery to flash the rom
or if you know any link abt that thered than post
and what is requered of custom recovery and how can i paste rom.zip in my cell and where i had go paste bcoz sdcard not showing
..
AshishKumar1 said:
Rahul Have u tried a Factory Reset Via the Bootloader (http://www.flickr.com/photos/robertwebbe/7050765051/)
Has that Worked ???
If Not
As I Told u Flash Custom Recovery Via Hasoons All In one Tool Kit (http://forum.xda-developers.com/showthread.php?t=1604439)
For How to Flash U first need to be in Fastboot mode then connect the phone to ur pc and in that toolkit its clearly given Flash Custom Recover When u See it It'll be Easy
After than Boot into recover Then select mounts option and click on mount USB Storage And ur SD card will popup Then Copy the NEW ROM and Flash it :laugh::laugh::laugh::laugh:
I Hope This Helps
Click to expand...
Click to collapse
thanx ashish bt actully my mobile debuging mode is of and my mobile not starting so can i able to paste file in my mobile sdcard using pc
and i already tryed factory reset using bootloader bt it not working
rahulpk7up said:
thanx ashish bt actully my mobile debuging mode is of and my mobile not starting so can i able to paste file in my mobile sdcard using pc
and i already tryed factory reset using bootloader bt it not working
Click to expand...
Click to collapse
Fastboot doesn't require usb debugging in either position to use.
Okay First I Guess U Need to Charge Your Phone Do One This Switch Off Your Phone Then Plug it In The A/C Charger and Let it Charge For a while after a couple of hours
Try booting into fastboot and get the custom recovery
open up files where fastboot.exe is located open up a command promt there (in the folder where fastboot.exe is located hold on The SHIFT KEY and RIGHT Click and select open command prompt)
The Type this (remeber your phone is connect in fastboot mode) fastboot flash recovery THE NAME OF THE RECOVERY.img
Hit Enter After that U can go into recovery
Try it hope it helps
...
AshishKumar1 said:
Fastboot doesn't require usb debugging in either position to use.
Okay First I Guess U Need to Charge Your Phone Do One This Switch Off Your Phone Then Plug it In The A/C Charger and Let it Charge For a while after a couple of hours
Try booting into fastboot and get the custom recovery
open up files where fastboot.exe is located open up a command promt there (in the folder where fastboot.exe is located hold on The SHIFT KEY and RIGHT Click and select open command prompt)
The Type this (remeber your phone is connect in fastboot mode) fastboot flash recovery THE NAME OF THE RECOVERY.img
Hit Enter After that U can go into recovery
Try it hope it helps
Click to expand...
Click to collapse
thanx i will try this....
bt after doing this i have to flash or not means i have to than how....
rahulpk7up said:
thanx i will try this....
bt after doing this i have to flash or not means i have to than how....
Click to expand...
Click to collapse
Sorry Dude but I Didnt Understand You
Is Your Question How do I Flash a New Rom?!
...
AshishKumar1 said:
Sorry Dude but I Didnt Understand You
Is Your Question How do I Flash a New Rom?!
Click to expand...
Click to collapse
no i jst want to restart my mobile as previous before that prblm apper
so i want to know that u had told me the way of recovery.img so after doing that my mobile will start or after doing that i have to flash it...
i have to ask that....
and thanx for your help
rahulpk7up said:
no i jst want to restart my mobile as previous before that prblm apper
so i want to know that u had told me the way of recovery.img so after doing that my mobile will start or after doing that i have to flash it...
i have to ask that....
and thanx for your help
Click to expand...
Click to collapse
Oohh After Doing The Custom Recovery U need to Flash a ROM then ur phone will be back to normal
And No Problem Dude
....
AshishKumar1 said:
Oohh After Doing The Custom Recovery U need to Flash a ROM then ur phone will be back to normal
And No Problem Dude
Click to expand...
Click to collapse
ok....and can you plz tell me which is the best rom for at&t htc one x
and where i have to paste it and with which application i able to paste it bcoz my sdcard showing at pc
rahulpk7up said:
ok....and can you plz tell me which is the best rom for at&t htc one x
and where i have to paste it and with which application i able to paste it bcoz my sdcard showing at pc
Click to expand...
Click to collapse
hey
Check This Out http://forum.xda-developers.com/showthread.php?t=1868236 A Really Good Rom For AT&T
And U Have to Flash it Through The Custom Recovery U flashed Before and For pasting the ROM You Need to Go into recovery and mount usb storage and paste the ROM
Then Flash the zip its pretty simple
AshishKumar1 said:
hey
Check This Out http://forum.xda-developers.com/showthread.php?t=1868236 A Really Good Rom For AT&T
And U Have to Flash it Through The Custom Recovery U flashed Before and For pasting the ROM You Need to Go into recovery and mount usb storage and paste the ROM
Then Flash the zip its pretty simple
Click to expand...
Click to collapse
ok ....i will try it and after doing it i will post on this thered thanx frnd
rahulpk7up said:
thanx you bt can you plz tell me how to flash a custom recovery and how to use custom recovery to flash the rom
or if you know any link abt that thered than post
and what is requered of custom recovery and how can i paste rom.zip in my cell and where i had go paste bcoz sdcard not showing
Click to expand...
Click to collapse
Look up how to put your phone into fastboot mode. Then look up the toolkit for your phone within its forum here on xda. If you need me to help you through it with netter instructions pm me on here
Sent from my Galaxy Nexus using xda app-developers app
AshishKumar1 said:
hey
Check This Out http://forum.xda-developers.com/showthread.php?t=1868236 A Really Good Rom For AT&T
And U Have to Flash it Through The Custom Recovery U flashed Before and For pasting the ROM You Need to Go into recovery and mount usb storage and paste the ROM
Then Flash the zip its pretty simple
Click to expand...
Click to collapse
this is the viberxl rom ...today i already downlpaded it i also like her image which is there thats why i download it....and thanx for ur help
I will never understand why people jump into rooting before they even know basic stuff like how to install a custom recovery or flash roms in recovery (!!).
Factory reset in bootloader wipes your SD card. It has to be reformatted in Windows before you can do anything else.
DO NOT use CWM recovery as previously stated--it is an unsupported port and has been known to corrupt data. You need TWRP.
My phone is Lava xolo a700 (rooted) and i had a proper functioning CWM installed and was running fine. Until one day i freezed my rom manager and did a factory reset...alas...it got struck at boot logo and it automatically tries to enter CWM recovery but fails to load and quits and restarts again. it is being a repeated process. i tried all kinda hard rest etc. even i cant enter fast boot mode. but i can enter factory mode. i have back up of stock rom. but i dont know how to restore as i cant even enter into recovery... :crying:
I even tried replacing the whole folder from my pc to root of sd card...but no luck...please HELP me to get out of this mess...please...
Hi there!
alsalman007 said:
My phone is Lava xolo a700 (rooted) and i had a proper functioning CWM installed and was running fine. Until one day i freezed my rom manager and did a factory reset...alas...it got struck at boot logo and it automatically tries to enter CWM recovery but fails to load and quits and restarts again. it is being a repeated process. i tried all kinda hard rest etc. even i cant enter fast boot mode. but i can enter factory mode. i have back up of stock rom. but i dont know how to restore as i cant even enter into recovery... :crying:
I even tried replacing the whole folder from my pc to root of sd card...but no luck...please HELP me to get out of this mess...please...
Click to expand...
Click to collapse
Have u tried booting to recovery mode urself?? u said u boot to cwm.automatically... so try to boot manually to it... if that doesnt work... then try a wipe data... wipe cache from stock recovery... them reboot...
or u can flash the backup files using odin via your pc... are u sure ur memory card or cwm.zip file is not corrupt?? try replacing one of these.... and retry...
naman4797 said:
Have u tried booting to recovery mode urself?? u said u boot to cwm.automatically... so try to boot manually to it... if that doesnt work... then try a wipe data... wipe cache from stock recovery... them reboot...
or u can flash the backup files using odin via your pc... are u sure ur memory card or cwm.zip file is not corrupt?? try replacing one of these.... and retry...
Click to expand...
Click to collapse
I even tried manually to enter into CWM recovery but same happens ... i flashed the stock recovery to CWM recovery... iam noob and how can i use odin to flash the back up files....my Mcard is in perfect condition....
Thanks for quick response...
Awaiting reply....
Also i cannot enter recovery then how can i clear the cache's....?!!!
alsalman007 said:
I even tried manually to enter into CWM recovery but same happens ... i flashed the stock recovery to CWM recovery... iam noob and how can i use odin to flash the back up files....my Mcard is in perfect condition....
Thanks for quick response...
Awaiting reply....
Click to expand...
Click to collapse
as u can see the phone boot up... ur phone is just soft bricked... dont worry... just google about using odin for your phone model... and try flashing another rom or kernel with it... can u enter the download mode ??
naman4797 said:
as u can see the phone boot up... ur phone is just soft bricked... dont worry... just google about using odin for your phone model... and try flashing another rom or kernel with it... can u enter the download mode ??
Click to expand...
Click to collapse
what shall be the steps i should be doing in odin? also i cant understand the proper function or procedure to be done for my fault.
Also please understand that i actually installed CWM from rom manager and later i freezed rom manager using titanium backup. After that the recovery was working fine manually. i stupidly factory reset the phone without unfreezing the rom manager. may be this is the reason why it got stuck up.
just tell me that is there any way through which i can flash my old backup stock rom using PC(created using CWM recovery) also tell me that is there any software which can clear cache by connecting through pc. so that i can give it a try.....please help me.
am very badly tensed...
alsalman007 said:
what shall be the steps i should be doing in odin? also i cant understand the proper function or procedure to be done for my fault.
Also please understand that i actually installed CWM from rom manager and later i freezed rom manager using titanium backup. After that the recovery was working fine manually. i stupidly factory reset the phone without unfreezing the rom manager. may be this is the reason why it got stuck up.
just tell me that is there any way through which i can flash my old backup stock rom using PC(created using CWM recovery) also tell me that is there any software which can clear cache by connecting through pc. so that i can give it a try.....please help me.
am very badly tensed...
Click to expand...
Click to collapse
The only method is via Odin... And the only way u can learn it is google... google this
Odin for <ur model>
and find relevant link....
use the backup file u have.....
there is actually not.much abt ur phone on xda...
naman4797 said:
The only method is via Odin... And the only way u can learn it is google... google this
Odin for <ur model>
and find relevant link....
use the backup file u have.....
there is actually not.much abt ur phone on xda...
Click to expand...
Click to collapse
Yeah i googled..but no results came up for my model... I downloaded one which is latest of version ...Then i installed it. also read that the back up files(of ROM) must be in .tar format in order to flash it from odin. Also the phone must enter some kind of FORCED UPLOAD MODE (saw in case of samsung).
what shall i be doing to enter that download mode(same as upload mode i guess) which you mentioned above.... Is there any converter to convert my back up files to .tar
Use this link and follow the steps u can easily unbrick your phone.
http://forum.xda-developers.com/showthread.php?t=2275220
Sent from my Xolo A700 using xda app-developers app
Hey guys.. Same issue happened to me also. I have rooted my Xolo B700 successfully and after installing some mods with the help of CWM recovery, it was working fine then. But today when I reset my phone backup & restore under under phone Settings the device shutdown and when I press power button it keeps on showing boot logo("XOLO") and then android Robo with processing bar and then restarts and same procedure happening infinite times untill I remove the battery.
i tried to get into recovery mode but didn't succeed. Please help me to restore to normal mode my phone I have my stock Nandroid backup in SD card. HELP ME !!!! :crying::crying:
Hi
I rooted My a110 with CWM recovery and SP flash tools And changed few things like added Malayalam language & added 4.2 JB camera
And The Problem Is I tried to Do a factory Reset by setting menu but it showing resetting repeatly and power offing and it boots automatically and again it showing resetting then power off like that it didn't stopping.
Is My phone Is bricked.Bricked phone means it will not boot isn't it?
How To Solve This Error Please Help
Solved
There r 2 options u can choose:
i)flash ur phone stock firmware through sp flash tool if it doesnt boot at all
ii)flash any custom rom, if u have installed cwm and u can enter cwm after the brick
Lesson to be learned-never flash multiple files together in cwm
and if u do so then always clear cache and dalvik cache and go according to flash instructions provided
dibinvm said:
Hi
I rooted My a110 with CWM .....
.......t will not boot isn't it?
How To Solve This Error Please Help
Click to expand...
Click to collapse
Do as above said...
and Remember.. if u flash Mods then don't ever reset factory default...
Thanks For answering
Parthalucky said:
There r 2 options u can choose:
i)flash ur phone stock firmware through sp flash tool if it doesnt boot at all
ii)flash any custom rom, if u have installed cwm and u can enter cwm after the brick
Lesson to be learned-never flash multiple files together in cwm
and if u do so then always clear cache and dalvik cache and go according to flash instructions provided
Click to expand...
Click to collapse
I already tried To flash Stock JB using sp flash tools but when i input scatter txt then my phone ejecting automatically and when press upgrade after that it only showing searching.
i tried with and without battery but same output
please help
dibinvm said:
I already tried To flash Stock JB using sp flash tools but when i input scatter txt then my phone ejecting automatically and when press upgrade after that it only showing searching.
i tried with and without battery but same output
please help
Click to expand...
Click to collapse
Use this SP Tool v3.1312.0.139
DOWNLOAD
ekhasti said:
Use this SP Tool v3.1312.0.139
Click to expand...
Click to collapse
IT Also Gives Same output
Shows Searching
how about i take this phone to service center will they find that it is rooted and charge me for repairing.
It also occurred to me. It is nothing related to mods . It occurs if u try to reset your phone from settings with CWM installed.The correct method is
1) load the scatter
2)select firmware>upgrade
3) when it shows searching then connect the phone in switched off state
u were doing the other way round
If still not successful
1)select download
2)when it shows searching connect the phone with the battery removed.
inGen.AD said:
It also occurred to me. It is nothing related to mods . It occurs if u try to reset your phone from settings with CWM installed.The correct method is
1) load the scatter
2)select firmware>upgrade
3) when it shows searching then connect the phone in switched off state
u were doing the other way round
If still not successful
1)select download
2)when it shows searching connect the phone with the battery removed.
Click to expand...
Click to collapse
I tried Everything You said same error occurred
SP Flash tool show SEARCHING
dibinvm said:
I tried Everything You said same error occurred SP Flash tool show SEARCHING
Click to expand...
Click to collapse
Check the title bar ,if u see " Runtime trace mode" written then press CTRL+ALT+T and try again
Solved again
I have gone through this many times.
Do it like i tell u.
Open the sp flash tool folder. Dont run it.
Now right click the sp flash tool software and select run as.
Then select run as adminstrator.
Now load the scatter file.
If u have cwm installed then uncheck the recovery option so as to keep cwm.
Now power off ur phone remove the battery.
Connect it to the computer using usb cable but dont put the battery.
Now if u have installed the drivers for A110 correctly by downloading from official mmx site then nothing will happen.
But if haven't installed adb drivers yet then do so and also install drivers using pdanet software(google it just a 3-4mb file).
Now if all is ready as above then connect ur phone without battery then click download then when it says searching , put ur battery .
Now it will detect ur phone anyhow(impossible to fail becoz tested and done by me everytime)
the download will start and stock firmware will be installed.
Wait for it to be over
put ur battery out of phone then put it in again. Now power on ur mobile.
If u have cwm installed then flash custom roms directly through them becoz each and every custom rom is rooted. So u dont need to root the stock firmware and softbrick ur mobile again.
Now if i helped u then pls hit thanks button and dont fear about these bricks. My A110 has gone through them 100 times and still i flash it.
Anyway do u even plan on using custom rom for ur device?
Please let me know from comments if u have repaired ur device or not.
And its not needed to take it to MMX service center and pay Rs.200
for flashing the stock firmware which u can do by following above methods
---------- Post added at 12:28 AM ---------- Previous post was at 12:25 AM ----------
We forgot if he has
i)run the sp flash tool as adminstrator or not becoz if he didnt then the sp flash tool will keep searching for infinity and still not detect ur device.
Ii)installed the adb drivers correctly
see the video on installing vcom drivers for sp flash tool below
Decided to try and revive my old hard-bricked nexus s paperweight the other day
Used Unbrickable Mod from here: http://forum.xda-developers.com/showthread.php?t=1566475
Worked great, SBL injected, but I'm pretty sure the phone is in a bootloop because its getting detected intermittently by the computers I'm using. So when I try to flash with heimdall the device isn't detected and I can't follow through. Only hear the comp play a little sound of something being connected via USB. Also I think I should mention the power button doesn't work. Any ideas?
Do at your own risk i am not responsible actually this worked for my device
sedelek said:
Decided to try and revive my old hard-bricked nexus s paperweight the other day
Used Unbrickable Mod from here: http://forum.xda-developers.com/showthread.php?t=1566475
Worked great, SBL injected, but I'm pretty sure the phone is in a bootloop because its getting detected intermittently by the computers I'm using. So when I try to flash with heimdall the device isn't detected and I can't follow through. Only hear the comp play a little sound of something being connected via USB. Also I think I should mention the power button doesn't work. Any ideas?
Click to expand...
Click to collapse
If u have installed cwm recovery on your mobile then do these steps:
turn off device
goto recovery mode (google your device)
clear cache and reset your phone from there and restart
this should solve bootloop problem if not then you can try flashing new rom by doing this
download rom for your device and follow the steps by the ddeveloper of that rom if therr is no guide on how to install that rom then u can try this
AT YOUR OWN RISK
for CWM 6 might work on other version :/
copy. zip file of your custom rom then goto recovery mode and then format system
reset phone
clear cache
install zip from sdcard and then choose your rom after that clear delvik cache and last reboot device click yes and wait rom to load can take 5 mints
NC4777 said:
If u have installed cwm recovery on your mobile then do these steps:
turn off device
goto recovery mode (google your device)
clear cache and reset your phone from there and restart
this should solve bootloop problem if not then you can try flashing new rom by doing this
download rom for your device and follow the steps by the ddeveloper of that rom if therr is no guide on how to install that rom then u can try this
AT YOUR OWN RISK
for CWM 6 might work on other version :/
copy. zip file of your custom rom then goto recovery mode and then format system
reset phone
clear cache
install zip from sdcard and then choose your rom after that clear delvik cache and last reboot device click yes and wait rom to load can take 5 mints
Click to expand...
Click to collapse
Thanks for the speedy response!
I'm sorry I should have provided more info. The screen has no display so any manipulations from the device are impossible. Also the power button is non-responsive so I can't use it to access recovery mode. The only way I know it's bootlooping actually is it pops in and out of detection in unbrickable and the sounds of connection and disconnection that play when connected to the comp via USB. Also I don't have CWM. Last I checked (a while ago) it was on a stock ROM.
Ohh you have bricked your mobile :/ but dont worry
I am going to post a tutorial on how to unbrick a mtk phone with same issue ... , may that tutorial will help you
I will post link here as i post that tutorial but i dont gurantee that will work or not
Sent from my A2
Hello , I'm parsa...
I root and flash recovery(cwm) and rom(cm) on my friend galaxy fit .... there wasn't problem until next day ... he told me that device doesn't boot..
I tried to flash stock firmware on it and flashed but it doesn't work again and hangs on this page :
I follow instructions step by step to unbrick it but it doesn't work again .... :crying:
please tell me what can i do???what should I do??
I'm very embarrassed about it...help me...
thanks for helps...
I would recommend to you follow this thread http://forum.xda-developers.com/showthread.php?p=51886671#post51886671
Thanks But when I flash custom recovery it says : "E:/can't mount system or directory ..." and just can flash stock firmware so then device hangs on that page....
and I can't wipe data/system(factory reset) in recovery...again hangs on that page..
I installed drivers and wanted to use One Click Unbrick but computer can't detect device ( I tried with 2 pc )...
I really don't know what should i do??? I tried every things...
please tell your friend and devlopers because i don't know any body here...thanks...
did you remove your battery and flashed again rom or cwm ?
maybe , I don't remember .... it's about 2month ago....
DO you find a way??
I search but didn't find any way...
what is your telephone status now.did you proceed to download and recovery mode.ıf you login to download or recovery mode it easy.
Yes can..
Yes I can go to Download Mod and Recovery but when select reboot or wipe data in recovery , hangs on that page...
Yesterday I brick device to use one click unbrick but didn't detect phone , But I flash stock rom again and now I can go to download and recovery...
Click to expand...
Click to collapse
What's your Idea??
My PC OS : Windows 7 Ultimate 64-bit
Click to expand...
Click to collapse
Reboot to Odin mode and connect your mobile to your PC. Download Odin to your PC. Then search a method on how to flash stock rom on Galaxy Fit with Odin. Follow the instructions.
---------------------------------
Hope I helped you! If I did , then why not press that Thanks button under my post...
Thanks , But I know That and Do all of them ... Please read from first post...My problem is when i flash Stock rom(firmware) phone stop on this page ...
it happened when go to recovery and press reboot or wipe data/system(factory reset) too...
Awww... Sorry dude... Cant help you with that :/
-----------------------------------------
Hope I helped you! If I did , then why not press that Thanks button under my post...
Colud you take backup from your sd card and formatted again and put rom and recovery versions you have.and test again
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12&nocache=1&z=1710748479235917
and follow
First of all, the phone is not bricked, obviously as long as it has a recovery and will turn on at all. As for a fix, try a seperate-file firmware flash, google "upgrade galaxy fit to 2.3.4", or something like that, also, try flashing a CWM recovery with ODIN, and just flash a CM7 ZIP or any other ROM, it will not be able to mount /system/ beucase the default samsung SYSTEM format is EFS, which CWM can not read, it can only read EXT file systems, soooo, install the recovery and a custom ROM, see what happens
Flash Froyo!
Hey there,I also suffered a lot sue to this ! Ultimately i flashed a froyo rom and everything was back to normal! :good:
@Enymous
Just ask ur friend what he did to the phone!!:sly:
Usb debugging needs to be enabled.
Next thing is:- Stop worrying!! Flash the same firmware version(if u remembered exactly) which came preinstalled from factory. It may b froyo or gingerbread. Download that particular firmware & note that if u were having froyo preinstalled & have downloaded the same exact firmware, then it must be a 4 package firmware(i.e. containing 4 files when u uncompress it). U can use Odin 4.42 & follow this sequence (even if u know) :
*Install Samsung mobile drivers on pc.
*Take out & reinsert battery.
*Press "HOME,POWER,VOLUME-DOWN" buttons together for download mode.
*Launch Odin 4.42 as administrator.
* Connect the phone to pc & wait till u see COM PORT mapping box turned yellow.
* Now set the files from the froyo package that u downloaded in exactly the same sequence as follows:
OPS: BENI_v1.0.ops
BOOT: APBOOT_S5670.....tar.md5
PHONE: MODEM_S5670.....tar.md5
PDA: CODE_S5670.....tar.md5
CSC: CSC_S5670.....tar.md5
Press start & wait till u see "PASSED"
Meanwhile ur phone will reboot.
Then it will b back to life(with froyo) guaranteed.
First try these steps!! I know it 100% works. coz I m used to all these issues.
Good Luck!!:thumbup:
Hope this helps...!!