Database Info

urgent please heeeeeeeeeeeeeelp me to root my tab

first of all sorry for my english ..but i have a really big problem to root my chinesse tab made by MALATA the model is MALATA SMB 9705 it runs with android 4.04 ...i have tried many ways to root it but i can't ....(super one click, autoroot ....and many others) one of the problems it that i have not the traditionnel connection usb (storage mode and softward connection ) i only have MTB and camera mode ....
please help me it's very urgent and i count on you my friends help help help

Have you Installed its drivers????
Sent from my MiniPro using xda app-developers app

mc lean milyetf
akshaykishorchauhan said:
Have you Installed its drivers????
Sent from my MiniPro using xda app-developers app
Click to expand...
Click to collapse
yes my friend but it only work on mtb no pc soft or mass storage

brayan85 said:
first of all sorry for my english ..but i have a really big problem to root my chinesse tab made by MALATA the model is MALATA SMB 9705 it runs with android 4.04 ...i have tried many ways to root it but i can't ....(super one click, autoroot ....and many others) one of the problems it that i have not the traditionnel connection usb (storage mode and softward connection ) i only have MTB and camera mode ....
please help me it's very urgent and i count on you my friends help help help
Click to expand...
Click to collapse
i used this to root my hp slate 7 tab.....should work for you my friend but at your own risk....after using this i used unlockroot tool just to remove the chinese root app and install super su....hope this helps....
While searching for a method to root the JB build for the yarvik tablet of my family (usual methods have not been successful), i stumbled upon the following Windows based method that now i want to share and should work with a lot more devices:
On your PC:
1. Install USB/ADB drivers from your manufacturer's website
2. Install & connect via http://www.moborobo.com Management Tools, loads own device specific ADB-drivers
3. Download & install this Chinese piece of software from http://www.shuame.com/
In case you don't understand what you do:
- On Website press blue download-button with arrow pointing downwards
- During Installation uncheck every checkbox except the one that grays out the next-button upon unchecking
the download has been a bit slow for me (10kb/sec), if it fails or the take it offline: drop a comment, perhaps i can share the setup file somehow
4. On your device: turn on USB-debugging
On your PC:
5. Run Moborobo Software, then plug your device to USB-Port, wait until Moborobo has recognized it (in my case i had to click some dialogues...)
6. Run freshly installed software from Shuame.com (titled Ë¢»ú¾«Áé in my start menu)
7. When shuame-Logo appears on your device's screen, head on the windows-software towards the 4th icon in the top row; on the appearing screen click on the 4th icon in the 2nd icon-row (the android with some chinese signs + ROOT as title)
on your device:
8. download SuperUser (or superSU) from Market or install via other sources (if not already done)
9. replace asian root / su files (recognized as older versions) with newer ones by SuperUser or superSU
10. delete 2 chinese shuame-APKs from /system/apps directory or uninstall via Titanium Backup
11. => you're done.
if more than 10 People complain they can't find the right button's to click
then i'm willing to post a few screenshots...
else: have fun!
oh, and if this worked for you: drop a comment and let the others know!

thank you
thanks very much for your reply my friend but unfortunetly it did not work for me when i click root the process stop in the middle so sir thank's thanks very much and if you have any other advice it's welcome

brayan85 said:
thanks very much for your reply my friend but unfortunetly it did not work for me when i click root the process stop in the middle so sir thank's thanks very much and if you have any other advice it's welcome
Click to expand...
Click to collapse
it kept stopping in the middle for me but i just kept trying and it worked.......i also clicked on the other root icon a couple of times to.....

[Q] need help for root micromaxx a27

actually guys i already know method how to root my phone but i am facing some kind of problem.
like.
1.when i connect my phone to computer and i click install drivers file automaticly it always take a process n then it say drivers can not be install
2. when i try manual drivers method-control panel-device manager-other devices there are 2 type of directries and both have mark of ! .
3.when i open unlockroot click in root it said you device is not connected..but my device already detect by moborobo.
4.i ask my 1 friend for help but he is saying to me drivers are preinstall in your mobile but my phone have not.so i download it aprox 8mb pakage in rar but its not working.
now tell me what i have to do ;(

FROM_HEAVEN said:
actually guys i already know method how to root my phone but i am facing some kind of problem.
like.
1.when i connect my phone to computer and i click install drivers file automaticly it always take a process n then it say drivers can not be install
2. when i try manual drivers method-control panel-device manager-other devices there are 2 type of directries and both have mark of ! .
3.when i open unlockroot click in root it said you device is not connected..but my device already detect by moborobo.
4.i ask my 1 friend for help but he is saying to me drivers are preinstall in your mobile but my phone have not.so i download it aprox 8mb pakage in rar but its not working.
now tell me what i have to do ;(
Click to expand...
Click to collapse
download adb and installed the adb usb drivers, that should do the trick. also it looks like its has android 2.3 gingerbread, you can try this Method instead if you can get the usb working. (download the link on the second post, its a apk so install it from your phone.

sorry
Trozzul said:
download adb and installed the adb usb drivers, that should do the trick. also it looks like its has android 2.3 gingerbread, you can try this Method instead if you can get the usb working. (download the link on the second post, its a apk so install it from your phone.
Click to expand...
Click to collapse
not working

help is here.......!~!
FROM_HEAVEN said:
actually guys i already know method how to root my phone but i am facing some kind of problem.
like.
1.when i connect my phone to computer and i click install drivers file automaticly it always take a process n then it say drivers can not be install
2. when i try manual drivers method-control panel-device manager-other devices there are 2 type of directries and both have mark of ! .
3.when i open unlockroot click in root it said you device is not connected..but my device already detect by moborobo.
4.i ask my 1 friend for help but he is saying to me drivers are preinstall in your mobile but my phone have not.so i download it aprox 8mb pakage in rar but its not working.
now tell me what i have to do ;(
Click to expand...
Click to collapse
hey i knw what u shud do looks like u cant install adb drivers........what u shud do instead is install adb drivers via PDAnet......its a software which will download adb drivers for u when i was new to rooting i cudnt install adb drivers myself so i used PDAnet......download PDAnet sotware I'm bound to post outside links n i dnt hav the link on xda so u can search it on google.......I hope it helps.................. n ohh please hit the thanks button afterwards......!~!

thanks
Alithe1 said:
hey i knw what u shud do looks like u cant install adb drivers........what u shud do instead is install adb drivers via PDAnet......its a software which will download adb drivers for u when i was new to rooting i cudnt install adb drivers myself so i used PDAnet......download PDAnet sotware I'm bound to post outside links n i dnt hav the link on xda so u can search it on google.......I hope it helps.................. n ohh please hit the thanks button afterwards......!~!
Click to expand...
Click to collapse
thanks bro finally i get a answer i will try it.
thanks again

Hit thnx
FROM_HEAVEN said:
thanks bro finally i get a answer i will try it.
thanks again
Click to expand...
Click to collapse
NO problem plzz hit the thanks button.........!~!

[Q]

i was trying to root my phone by following the guide from the FAQ
http://forum.xda-developers.com/showthread.php?t=895545
and i got to the step:
point it to where you downloaded the Android SDK (..\android-sdk-windows\google-usb_driver)
Make sure to CLICK "Let me pick from a list of device drivers on my computer"
Then from the list 3 choices select Android Bootloader Interface
Click to expand...
Click to collapse
to install the usb driver and it didnt work as there is no google usb section of the SDK download.
I went and downloaded google-usb-drivers from google but my computer (win 7) still cant find anythign compatible.
what do i do?
EDIT: oops i didnt realize i had no title. Sorry. Feel free to add one if you want.
Also i did search for this. and was suprised to find no results... however there are lots of different search boxes to choose from on this site. I was pretty sure i chose the one for nexus s

Did you select the correct library path for Windows to find the driver on the computer??
Sent via Tapatalk 4 now Free

Did you select the correct library path for Windows to find the driver on the computer??
yes i did point to the folder. both the parent folder and the various inner folders.
it works fine in usb mode when the phone is on.
they are the official google usb drivers is there another source for my Nexus S.
also for reference it is under other devices - android 1.0
do i even need that step?

chico1st said:
Did you select the correct library path for Windows to find the driver on the computer??
yes i did point to the folder. both the parent folder and the various inner folders.
it works fine in usb mode when the phone is on.
they are the official google usb drivers is there another source for my Nexus S.
also for reference it is under other devices - android 1.0
do i even need that step?
Click to expand...
Click to collapse
is there another good guide i can follow? maybe there is a step i need to do before usb install? This guide assumes the usb drivers will come with the SDK but the only data the SDK tries to update is itself to SDK15 which the guide specifically mentioned not to do.

chico1st said:
is there another good guide i can follow? maybe there is a step i need to do before usb install? This guide assumes the usb drivers will come with the SDK but the only data the SDK tries to update is itself to SDK15 which the guide specifically mentioned not to do.
Click to expand...
Click to collapse
Try this...

Setting.Out said:
Try this...
Click to expand...
Click to collapse
that has the same issue
i cannot get usb connectivity in for the fast boot mode
from the rootkit the when i plug in my device even after installing the universal usb drivers i think windows is installing something else. Thus stopping me from accessing it while in fastboot mode
Not really sure what to do here. USB debugging enabled and everything all the guides are pretty easy to follow and have the same steps.

Google PdaNet, download and install it after attaching your phone to pc via usb. It will also install device driver... I think it is 'android 1.0' driver issue...
Sent from my Nexus S using XDA Premium 4 mobile app

Faizi Ch said:
Google PdaNet, download and install it after attaching your phone to pc via usb. It will also install device driver... I think it is 'android 1.0' driver issue...
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
do i have the usb debugging mode on or off when i do this?

Faizi Ch said:
Google PdaNet, download and install it after attaching your phone to pc via usb. It will also install device driver... I think it is 'android 1.0' driver issue...
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, usb debugging should be on...
chico1st said:
do i have the usb debugging mode on or off when i do this?
Click to expand...
Click to collapse
Sent from my Nexus S using XDA Premium 4 mobile app

nope didnt work
just so you know when i plug in the phone with debugging on i have 'android composite adb interface' installed
i have removed all the drivers from this computer previously. i can do it again though.
after installing pdanet i have 'android 1.0' pop up under other devices with an exclamation on it in device manager...i don't know if that is normal or not?
how do i know when this is working? i always try to run "oem fastboot unlock" which goes to "waiting for device" but will i no longer see the
USB control Init
USB control init end
??

It is the same issue of android 1.0 driver which i also faced in win8... You have to install android 1.0 driver manually from device manager
Sent from my Nexus S using XDA Premium 4 mobile app

Faizi Ch said:
It is the same issue of android 1.0 driver which i also faced in win8... You have to install android 1.0 driver manually from device manager
Sent from my Nexus S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so if i go to install the drivers from the pdanet folder if i tell device manager to search the winusb folder it says "cannot find drivers for your hardware" and if i dont search and say have disk - i chose 'android device' then the file in android_'winusb' file but it says "specified location does not have information about your hardware"
so i cannot get it to work.
This is on XP and win7 (2 different computers). I prefer the XP one for this though

Install nexus s root toolkit, then try to install driver from there.
http://forum.xda-developers.com/showthread.php?t=1766475
Or try this
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install

Faizi Ch said:
Install nexus s root toolkit, then try to install driver from there.
http://forum.xda-developers.com/showthread.php?t=1766475
Or try this
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Click to expand...
Click to collapse
YAY somehow that last one worked thank you so much!!!
now a question. I have been following this guide which is from 2011 and the superuser code it recommends has a version for donught and froyo. My SNS is at 4.1.2 right now so can i use those super user scripts or should I use something else? or do i need that at all. I just want to put a new rom on my SNS.
thank you all i love you!

chico1st said:
YAY somehow that last one worked thank you so much!!!
now a question. I have been following this guide which is from 2011 and the superuser code it recommends has a version for donught and froyo. My SNS is at 4.1.2 right now so can i use those super user scripts or should I use something else? or do i need that at all. I just want to put a new rom on my SNS.
thank you all i love you!
Click to expand...
Click to collapse
Welcome!
First unlock your bootloader and install custom recovery. Then download latest supersu zip and install it via recovery
Sent from my Nexus S using XDA Premium 4 mobile app

[SOLVED]Xperia L Drivers And ADB Problems

Hi there
I have seen some posts where users are having difficulty connecting Xperia L to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
UPLOADED FILE : Sony Xperia Drivers for ADB.
UPDATE :
Use flashtool drivers to install adb/fastboot/flashboot drivers. This is the most simplest and easiest method I have come across lately.
Simply download flashtool
http://www.flashtool.net/index.php
Go to folder where you have downloaded it. Usually C:/flashtool/drivers.
Select the drivers for your particular device. I use universal for all three types of drivers. It is helpful to boot into fastboot/Flashtool before installing the drivers but not necessarily.
Good Luck

Reserved

This is great Hnk1 thanks a bunch

joel113- said:
This is great Hnk1 thanks a bunch
Click to expand...
Click to collapse
I am glad I could be of help

Good work
Hnk1 said:
Hi there
I have seen some posts where users are having difficulty connecting Xperia L to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
UPLOADED FILE : Sony Xperia Drivers for ADB.
Click to expand...
Click to collapse
:good: Good work

Installing these drivers didn't work, But after a factory reset and installing the Sony companion, the drivers installed and now gets detected in the ADB.
Thanks

ReSkid said:
Installing these drivers didn't work, But after a factory reset and installing the Sony companion, the drivers installed and now gets detected in the ADB.
Thanks
Click to expand...
Click to collapse
Did you try the attached drivers ?
I am just wondering you might hadnot turned USB debugging or disabled MTP mode or something you might have done to your kernel/ROM that might have changed the environment of your phone which factory reset reverted back. These drivers are NOT the drivers for connecting your device to your PC. These are used when you are unlocking your bootloader or working with ADB/fastboot commands.
Thanks for your contribution about how it worked for you and it might help others who might have a problem!

you can use ADB Wireless
https://play.google.com/store/apps/details?id=com.sherdle.adbwireless&hl=en

Hnk1 said:
Did you try the attached drivers ?
I am just wondering you might hadnot turned USB debugging or disabled MTP mode or something you might have done to your kernel/ROM that might have changed the environment of your phone which factory reset reverted back. These drivers are NOT the drivers for connecting your device to your PC. These are used when you are unlocking your bootloader or working with ADB/fastboot commands.
Thanks for your contribution about how it worked for you and it might help others who might have a problem!
Click to expand...
Click to collapse
I had tried every possible driver haha! Also had everything like USB Debugging etc turned ON, I guess it might have been some app I had installed. Anyways now I have rooted it successfully.
Thanks a lot for your help.

I am still having this problem for days now. still no connection to pc/flashtool whenever i try to reboot into flashmode/flashboot. i've been google'ing around. and i've tried this method but it's seems doesnt work. i've already got tons of these unknown devices, and the driver doesnt work(or maybe im too noobish to install them).please help

ReSkid said:
I had tried every possible driver haha! Also had everything like USB Debugging etc turned ON, I guess it might have been some app I had installed. Anyways now I have rooted it successfully.
Thanks a lot for your help.
Click to expand...
Click to collapse
I am here for anything that I can help you with. It's great that your problem is fixed now !
AATrooperz said:
I am still having this problem for days now. still no connection to pc/flashtool whenever i try to reboot into flashmode/flashboot. i've been google'ing around. and i've tried this method but it's seems doesnt work. i've already got tons of these unknown devices, and the driver doesnt work(or maybe im too noobish to install them).please help
Click to expand...
Click to collapse
For a second when I looked at your images, I was just baffled. THOSE MANY UNKNOWN DEVICES! That can't be right you know.
There must be only ONE unknown device that ought to be installed as mentioned above in my post.
Do you see these devices when you connect your phone to your PC or those unknown devices are already there?
Have you tried windows update to fix it?
Tell me more about why you see so many devices.
If suppose, they are already there, just see which device comes up when you connect your phone and try installing drivers for that particular device.
Also, i suggest just go for add a new device and then select hard disk and then install drivers which are attached. I hope that fixes your problem.
REMEMBER your device must be connected when you are trying to install the drivers

right.i'm gonna give it a try,wish me luck. thanks!

I still need your help!!
I could not install or might be dont know how to install the attached xperia drivers which are in .dll files. Can u explain in detail how can I install it. I've lost root access after upgrade to 4.2.2 . I do really need your help to get back root access and install a valid driver for my device. From C2104

Hnk1 said:
I am glad I could be of help
Click to expand...
Click to collapse
Dude someone needs your help ^
I just quoted your post so you'd get notified about it.

@up ur post is a simple spam, if u dont know how to help just dont write anything. n one needs notifications for replying
FPThatea said:
I could not install or might be dont know how to install the attached xperia drivers which are in .dll files. Can u explain in detail how can I install it. I've lost root access after upgrade to 4.2.2 . I do really need your help to get back root access and install a valid driver for my device. From C2104
Click to expand...
Click to collapse
just go to device manager, connect phone and find ur not recognized device; then right click on it and press update/install drivers. From the window that will appear choose socond option (it should be something like manualy find drivers or something like that), then navigate to that downloaded folder. This way it should install them
But XL doesnt need any external drivers. If u install fasboot an flashmode drivers from flashtool folder they should work; they are working for me and for anyone i know. U may also install SEUS and then connect phone. This way u dont need that drivers, but ofc what i have mentioned earlier should work.

FPThatea said:
I could not install or might be dont know how to install the attached xperia drivers which are in .dll files. Can u explain in detail how can I install it. I've lost root access after upgrade to 4.2.2 . I do really need your help to get back root access and install a valid driver for my device. From C2104
Click to expand...
Click to collapse
Hi
well first thing you need to understand is there are three drivers you need to install to make everything work including fastboot , flashboot, and Xperia L storage and SD card.
To install each type of drivers, you must have the phone in that particular state. To install normal drivers (for mass storage and PC companion), if suppose not detected automatically, you need to turn on your phone and then unlock it. Then see if drivers are found or not!
If the windows give you the error like undetectable device attached, go to my computers and then properties and the device manager and look for any device with an exclamation mark (yellow).
click on it and then select update drivers and use drivers that have been attached in the first post. (Remember to extract the attachment in a folder)
Then click on select drivers from hard drive (click manual installation of drivers )
and locate the folder where you have extracted drivers. This will install drivers!
if you want drivers for flashmode/fastboot, turn off phone and boot into flashmode and then install drivers as I mentioned above.
I'm quite certain they wouldn't trouble you at all. If you still need help, do not hesitate to ask !
Good luck
P.S: You will need to enable developers option and select USB debugging to root your device. I hope you are doing that right !
Joel16 said:
Dude someone needs your help ^
I just quoted your post so you'd get notified about it.
Click to expand...
Click to collapse
Thank you so much ! I only check my notifications so I really appreciate it

uremytoy said:
@up ur post is a simple spam, if u dont know how to help just dont write anything. n one needs notifications for replying
just go to device manager, connect phone and find ur not recognized device; then right click on it and press update/install drivers. From the window that will appear choose socond option (it should be something like manualy find drivers or something like that), then navigate to that downloaded folder. This way it should install them
But XL doesnt need any external drivers. If u install fasboot an flashmode drivers from flashtool folder they should work; they are working for me and for anyone i know. U may also install SEUS and then connect phone. This way u dont need that drivers, but ofc what i have mentioned earlier should work.
Click to expand...
Click to collapse
Actually why don't you have a look at what the OP said,
"Thankyou so much, I only check my notifications so I really appreciate it"
I know what I'm doing here, if you don't have anything nice to say about it then DON'T say anything

Thanks..but still need you
Hi..Thank you so much for getting me back very soon.. I've successfully installed the driver with your your help. But, When I tried to root by using metachopper 1.3 my device did not reboot and start. Now, it just dead and really sad for this. I don't know what shall I do to get my phone back. Yes, I have 4.2.2 update in .ftf file with a flashtool. But, it does not work for me now.. Do you any experience to help me to solve my unwanted problem..Please..

FPThatea said:
Hi..Thank you so much for getting me back very soon.. I've successfully installed the driver with your your help. But, When I tried to root by using metachopper 1.3 my device did not reboot and start. Now, it just dead and really sad for this. I don't know what shall I do to get my phone back. Yes, I have 4.2.2 update in .ftf file with a flashtool. But, it does not work for me now.. Do you any experience to help me to solve my unwanted problem..Please..
Click to expand...
Click to collapse
you must boot your phone in fast boot mode. turn off your phone and hold down volume down when you connect it to the PC!
Use flashtool to flash ftf file. you'll need to place ftf file in C:/flashtool/firmwares
then select the right file for xperia L and just flash ftf.
in flash tool , select flash n then fastboot and then I'll ask you to put your phone in fast boot (use method mentioned above)
good luck !

I have tried all your methods
but I keep getting this error message "An error occurred during the installation of the device"
I am using windows xp sp3
please help

[Q] RCA 7" 8GB Tablet

I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.

deathscreations said:
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
Click to expand...
Click to collapse
Did u figure out how to root your rca tablet....I have one and I need mine rooted also I can't store any apps on my ad card

Can you give more specifics such as the the model number, what version of android is it running?
Sent from my Nexus 5 using xda app-developers app

I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).

Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
TAHNK YOU Takenover83 you are amazing. I rooted my tablet same model and set up as yours.
frarredo here is the information you were asking about in the picks below..
Please take notice to picture Screenshot_2013-11-29-23-15-32.png running bubble launcher, xposed framework , and xhalofloaingwind, to muliwindows on the tablet and all android phones,

Sorry here is the last pic it did not let me upload

Help
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
l]
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!

wy3r5 said:
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
Click to expand...
Click to collapse
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.

Desarial said:
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Click to expand...
Click to collapse
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.

Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/

Getting Debugging to work.
I was not drunk when I made this post...I have the RCT6378W2 if you go to about tablet in your settings and repeatedly tap the build number...the deveolper options will appear...I fell out of my seat when i discovered this.
On a side note...if you repeatedly tap the android version...a cute picture of the android jellybean will appear. Try it.

rca 7" dual core tablet root
Takenover83 said:
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Click to expand...
Click to collapse
im not down with kingo, too risky! gonna try impactor. i will report back soon :fingers-crossed:
---------- Post added at 09:31 PM ---------- Previous post was at 09:15 PM ----------

1: Install drivers. Seeing as RCA does not provide drivers, we had to find some that work. That's where PDANET comes in. Their drivers support a very wide range of Android devices. We are not installing it to tether. We just want the drivers it provides. So download PDANET, install, let it detect your device, install the drivers, and then afterwords you can uninstall it.
2: Enable Developer Options. Settings>About tablet> Tap Build Number a bunch of times till it's enabled.
3: Enable USB Debugging. Options>Developer Options>Click On (up top)>Then checkmark USB Debugging
That should clear up some of the confusion in this thread. How you root after step 3 is up to you. Personally, I did it with Kango. Which was straight forward. Connect device, hit a button, Say yes to a couple questions, reboot, presto done.

cueballs said:
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Click to expand...
Click to collapse
Thanks, that sorted things out.
To make clear, and aid in any other inquiries, I managed to find an ADP connection mode, among other android update features. with the device off, hold volume up while turning the device on. it should boot to an image of an android with an open chest panel and the words, "no command". if you push volume up again it will provide you with options and instructions on how to execute. you can manual update the device with an SDK through USB ADP mode this way. I'm not sure if that makes anything simpler or generates a work around but I hope it helps with future development for this device.

Well got root now we need a recovery...

For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)

GloryFreak said:
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
Click to expand...
Click to collapse
You need to create "adb_usb.ini" in "Users>Username>.android".
Inside "adb_usb.ini" insert "0x2207" and save.
Source: http://blog.fh-kaernten.at/wehr/?p=1182

I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.

scooter29 said:
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
Click to expand...
Click to collapse
I had this problem too. make sure you're using the most recent version of pdanet. for whatever reason the older version just hang there and dont work right.

Installed the latest pdanet. It wont install the driver. I checked the device manager and it still shows the device without the driver. not sure what else to try..