My USB OTG has stopped working I modified it so it had a male usb port for charging, two days ago it was fully functioning, pen drives ,sixaxis controller and usb mouse worked. Today only the mouse and sixaxis works, the pen drive is not recognised , i've tried 4 different ones which work fine on my laptop. This could either be the OTG cable or the physical charging port ? I've already tried flashing different roms but all have the same problem
Thanks
Related
Do USB Hubs work with dock keyboard USB port?
IF I want to plug in an external hard drive for example, IT may need 2 USB ports..
OR if I want to plug in 2 xbox controllers.
Anyone tested this?
After tons of tries, the OTG function still not working in the way I expected, at least simply plug the USB stick to the OTG wire won't work(USB mice and keyboards work though, even my Logitech wireless mouse with an unifying connector works), but I noticed something really funny - - with a hub installed between the USB sticks and my Q, most of the USB sticks works, but not every hub, it's the hub in poor quality and build with bounded chip that works, I got a Fullspeed hub which have a Etron chip soldered on it but it never worked with my Q. What's more, if I connect my Q to the low-speed-bonded-chip-hub and then to the Full-speed-Etron-hub and then to a USB disk,it works!
The only possible reason I can imagine is that the OTG function of Q doesn't support any devices running on Fullspeed, and it needed a converter like a low-speed hub.
Any solution to this? Cuz carrying a extra hub around seems dumb!
BTW after upgraded to JB, I need the app 'OTG Helper' to mount the usb storage devices (in 4.0.4 Q will mount it itself), but mice and keyboards work just fine without this tool. And even with this tool, Q can only detect a SD card reader,but can't mount it (says no device found) and format the card to NTFS formation won't work either.Neither dose the USB hard drive(pressing the mount button and after a while it says the OTG didn't response but the busy LED of the hard drive flashs at regular intervals).
Any way to make usb otg work in cm11? i've tried a few different kernels and still can't get it to work.
Looks like so far this is the only thread that asks about broken usb OTG. Has anyone found a kernel that allows you to have mouse, keyboard, and USB storage support via OTG? I have never gotten a mouse to work with USB on this ROM, But on stock samsung firmware, you can get a mouse with a cursor and everything. Works with keyboards, and PS3 controllers as well.
But CM11 only has support for USB storage devices. What gives?
Ok
So I've had my Galaxy tab OTG for about a month now and was great until just a little while ago.
It always worked before but now anything connected to it doesn't work.
When I plug the otg in my device it recognizes that the otg is connected but the usb devices connected to it don't work at all.
For example, I connect a mouse to it and the pointer doesn't come up as well as the mouse light isn't even on.
Please help me, I really need a solution I use this otg for usb for school and also to connect xbox controllers.
Thanks if u can help
Sometimes i have the same problem, first clean your OTG with alcohol and toothbrush and your note 10.1 port when it is turned off.
If the problem persist just take it easy and just take out your OTG and reconnect it, try not to connect the OTG with a device attach to it, detach any devices of the OTG and then the OTG from the tablet, wait a few seconds and connect the OTG again and then wait a few seconds more until the Note recognize the OTG and connect the device to the OTG.
Its get a little tricky sometimes just be patient.
I got an Anker OTG hub. It works completely if I connect it to my laptop, however, if I try connecting it to my phone, my USB mouse+keyboard combo (wireless with a receiver) doesn't work. It works with other devices, including my laptop's USB C port, and my old phone's USB C port.
I did turn OTG on prior to connecting anything (I'd love (root) to know to keep it on at all times).
I already ensured they work on other computers through that OTG adaptor, and that a USB storage stick works on this phone through it. In addition to that, HDMI works too (the adaptor also has an HDMI port), and the USB C passthrough passes power successfully, as well. No warp charging, but that is to be expected and that's alright.
I have TWRP and everything. Is there a kernel mod I need? I'd be happy to do whatever's needed.
Maybe OnePlus needs some updates
Even i have latency issus with my midi keyboard
But not with op5t