Database Info

[NOOB] MMS Issue with ViperS ROM

sorry, I have a noob question about MMS Issue I am facing with ViperS 1.1.0 ROM. Excellent ROM, high speed and quality; I bye-ed ARHD for it
However, I am unable to receive or send MMS. I have baseband 11.76A.3504.00P_11.2A.3504.31_M, RIL 4.0.0037HMQ.
I search the entire thread and cannot find an answer. I even tried flashing RIL 4.0.0036HMQ and RIL 4.0.0035HMQ but no luck
Please help me out on this. I really need MMS as it is my everyday use
Thanks in advance.

phongnguyen246 said:
sorry, I have a noob question about MMS Issue I am facing with ViperS 1.1.0 ROM. Excellent ROM, high speed and quality; I bye-ed ARHD for it
However, I am unable to receive or send MMS. I have baseband 11.76A.3504.00P_11.2A.3504.31_M, RIL 4.0.0037HMQ.
I search the entire thread and cannot find an answer. I even tried flashing RIL 4.0.0036HMQ and RIL 4.0.0035HMQ but no luck
Please help me out on this. I really need MMS as it is my everyday use
Thanks in advance.
Click to expand...
Click to collapse
Have you tried the APN settings and all that good stuff? If not I'd try a re-flash. It works for me.

3484jacks said:
Have you tried the APN settings and all that good stuff? If not I'd try a re-flash. It works for me.
Click to expand...
Click to collapse
Yeah, I have all APN settings. I have the internet working fine, only MMS
I have tried reflashing this ROM with full wipe three times and no luck

come on, anyone
Please

phongnguyen246 said:
come on, anyone
Please
Click to expand...
Click to collapse
are you on wifi when trying to send the messages? I hardly ever send MMS, but when I do I always had trouble on wifi sending them so I just use my data connection

aznprodgy said:
are you on wifi when trying to send the messages? I hardly ever send MMS, but when I do I always had trouble on wifi sending them so I just use my data connection
Click to expand...
Click to collapse
I just tried downloading an MMS with wifi off but still, not working

I use viper and can confirm that mms does work as I use it often. Since you have checked your settings and all seems fine I would try to do a FRESH download of the Rom (not using the first older download) then wipe again full wipe data factory reset, and flash the NEW download. Perhaps something has gotten corrupted in the first download as its possible.... Then check mms after using a completely new download and complete wipe. Hopefully this will solve the issue. If not I suggest posting this on the developers web site and see if anyone had the same issue. They might know of a simple fix on the developers site. I'd give the fresh download a try first. If no joy, then I would ask on the developers site. I really hope this helps. I use viper as my daily Rom and have not had this issue. When you do your new flash make sure and wipe completely. I know you have tried to reflash however you were using the same old download this is why its important to re download the Rom incase the first is corrupted some how. Best wishes and I do hope this solves your issue.
Sent from my HTC Sensation 4G using xda premium

realsis said:
I use viper and can confirm that mms does work as I use it often. Since you have checked your settings and all seems fine I would try to do a FRESH download of the Rom (not using the first older download) then wipe again full wipe data factory reset, and flash the NEW download. Perhaps something has gotten corrupted in the first download as its possible.... Then check mms after using a completely new download and complete wipe. Hopefully this will solve the issue. If not I suggest posting this on the developers web site and see if anyone had the same issue. They might know of a simple fix on the developers site. I'd give the fresh download a try first. If no joy, then I would ask on the developers site. I really hope this helps. I use viper as my daily Rom and have not had this issue. When you do your new flash make sure and wipe completely. I know you have tried to reflash however you were using the same old download this is why its important to re download the Rom incase the first is corrupted some how. Best wishes and I do hope this solves your issue.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
thank you for your kind reply. May I ask you a noob question? I always choose full wipe within AROMA installer, is it right? or do I have yo manually wipe it in Recovery? If I am to wipe in recovery, which are the steps? I used ViperS as my daily ROM too; had no problems with the 1.0 release.
Cheers.

I always manually wipe all my partitions (except SD) before installing every rom, just to be on the safe side. hit wipe/format in recovery menu, then hit format all except SD and you should be good to go

phongnguyen246 said:
thank you for your kind reply. May I ask you a noob question? I always choose full wipe within AROMA installer, is it right? or do I have yo manually wipe it in Recovery? If I am to wipe in recovery, which are the steps? I used ViperS as my daily ROM too; had no problems with the 1.0 release.
Cheers.
Click to expand...
Click to collapse
Hi, I dont have your problem, but I did this way.
1. Androids backup
2. Wipe cache + dalvik in recovery
3. Enable smartflah (I use 4ext recovery and by phone is not s-off)
4. Run the aroma installer and perform full wipe
And done. The fist time it's slow but after reboot work great.
Sorry for my English.
Good luck!
Stig
from my HTC Sensation 4G using xda app-developers app

stigmaster0780 said:
Hi, I dont have your problem, but I did this way.
1. Androids backup
2. Wipe cache + dalvik in recovery
3. Enable smartflah (I use 4ext recovery and by phone is not s-off)
4. Run the aroma installer and perform full wipe
And done. The fist time it's slow but after reboot work great.
Sorry for my English.
Good luck!
Stig
from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
Thanks everyone, I have tried everything you told me, from downloading a fresh ROM, wipe everything except SD card and then re flash the ROM, but the trouble stands strong. I have no idea how to solve it now... so depressing...

Unfortunately, Android keyboard has stopped

I installed CM10 on my AT&T HTC One X and can't type anything as the keyboard keeps crashing. I've searched all over the net for a keyboard to install but everything like Swype requires you install it from the phone directly which I can't type on. Does anyone know of a solution to this crashing issue or somewhere that I can get an alternate KB?
Here's the issue, the keyboard keeps crashing and the home button doesn't work either.. the phone just vibrates when I press it. I installed the CM10 nightly build plus the gapps-jb-20121011-signed.zip GAPPS. I've been searching all over and search keeps breaking on xda so I can't find much on here right now.
-Keith

kelkin said:
I installed CM10 on my AT&T HTC One X and can't type anything as the keyboard keeps crashing. I've searched all over the net for a keyboard to install but everything like Swype requires you install it from the phone directly which I can't type on. Does anyone know of a solution to this crashing issue or somewhere that I can get an alternate KB?
Here's the issue, the keyboard keeps crashing and the home button doesn't work either.. the phone just vibrates when I press it. I installed the CM10 nightly build plus the gapps-jb-20121011-signed.zip GAPPS. I've been searching all over and search keeps breaking on xda so I can't find much on here right now.
-Keith
Click to expand...
Click to collapse
Try rolling back to the most recent stable version.
The new JB keyboard crashes on me whenever I try to save anything, but I'm running it on a Sense rom.

iElvis said:
Try rolling back to the most recent stable version.
The new JB keyboard crashes on me whenever I try to save anything, but I'm running it on a Sense rom.
Click to expand...
Click to collapse
I tried the last stable version too with the same results. Not sure why it keeps crashing on me :/
-Keith

kelkin said:
I tried the last stable version too with the same results. Not sure why it keeps crashing on me :/
-Keith
Click to expand...
Click to collapse
So you can't even interact with the "Select input method" dialogue in the notification pane? Because you should be able to remotely install a new keyboard through Play. Then once it's there, you can switch in the notification pane.

I'm having the same issue. Tried installing CM10 coming from CleanRom. Did a wipe before install.
Not only keyboard for me, home button doesn't work correctly and I cannot launch the browser.
Went back into recovery, flashed CM10 again, preformed not only a factory reset but also did a "system" wipe.
rebooted and things were fine.
rebooted back into recover and installed gapps, things are hosed again.
reproduced on gapps 4.2 and gapps-jb-20121130-signed.zip

phattychops said:
I'm having the same issue. Tried installing CM10 coming from CleanRom. Did a wipe before install.
Not only keyboard for me, home button doesn't work correctly and I cannot launch the browser.
Went back into recovery, flashed CM10 again, preformed not only a factory reset but also did a "system" wipe.
rebooted and things were fine.
rebooted back into recover and installed gapps, things are hosed again.
reproduced on gapps 4.2 and gapps-jb-20121130-signed.zip
Click to expand...
Click to collapse
Same here.. Browser won't open, home and recent apps key don't work also... glad it isn't just me.. So you're fine if you don't install gapps?
-Keith

iElvis said:
So you can't even interact with the "Select input method" dialogue in the notification pane? Because you should be able to remotely install a new keyboard through Play. Then once it's there, you can switch in the notification pane.
Click to expand...
Click to collapse
I can't even log into my google account, I can't get a keyboard to appear to type with.

OK,
Factory Reset and wipe "System"
Install CM10
Use gapps from 1011 - gapps-jb-20121011-signed.zip
Things are working.

phattychops said:
OK,
Factory Reset and wipe "System"
Install CM10
Use gapps from 1011 - gapps-jb-20121011-signed.zip
Things are working.
Click to expand...
Click to collapse
I can't seem to find Wipe "System" in the Factory Reset. The only options I am given to wipe are the data and cache which I have tried doing and afterwards reinstalling CM10 and GAPPS-jb-20121011-signed.zip yet the "Unfortunately Android's Keyboard (ASOP) has stopped working" still pops up

I know you have tried one of these but ill quote what Inflatedtitan gave to me when i had the same problem.
"Sounds like there could be a few problems so were gonna go with the most popular ones lol..
1. Sounds like you didn't wipe everything in twrp before you flashed. Make your you always wipe cache, dalvick, factory reset, and system. Then flash Rom followed by gapps.. then reboot
2. Have you restored from a titanium backup? If so, make sure next time its ONLY user apps.. if you restore system apps and data, think of your system settings from one Rom clashing with the system files from your new Rom. They won't play nice together. Only backup and restore user apps+data
3. If the above steps were taken correctly, I would delete the Rom.zip from phone. Maybe download using a different browser. Chrome browser is notorious for corrupting roms.. you could have had a bad download
Sent from my HTC One XL using Tapatalk 2"
With these steps I got my ROM working so maybe it could help you.

The issue y'all are having is coming from the newest gapps. Install a older gapps and you will be up and running. I had the same issue on my tab 7.0 and hox and reinstalling new gapps worked
Sent from my One X

Same Problem Over Here
majortaylor said:
The issue y'all are having is coming from the newest gapps. Install a older gapps and you will be up and running. I had the same issue on my tab 7.0 and hox and reinstalling new gapps worked
Sent from my One X
Click to expand...
Click to collapse
hi all i have sucessfully installed cm10 on my samsung galaxy s i9000
but i forgot to install gapps.
after installing gapps i just cant type anything it keeps telling me unfortunately andriod keyborad has stopped working.
what do i do?
what version of gapps can install for CM10 Stable?

xdagee said:
hi all i have sucessfully installed cm10 on my samsung galaxy s i9000
but i forgot to install gapps.
after installing gapps i just cant type anything it keeps telling me unfortunately andriod keyborad has stopped working.
what do i do?
what version of gapps can install for CM10 Stable?
Click to expand...
Click to collapse
Ask in the I9000 forums
Sent from my HTC One XL using xda app-developers app

phattychops said:
OK,
Factory Reset and wipe "System"
Install CM10
Use gapps from 1011 - gapps-jb-20121011-signed.zip
Things are working.
Click to expand...
Click to collapse
I had the same problem as others here, keyboard would stop working as soon as my One X started. The above fixed it. I only wiped System, did not Factory Reset. Make sure you're using the above version JB Gapps.

I've seen this issue when I accidentally forget to wipe something. I've found I have to wipe, flash previously working Rom, THEN go back, wipe and install new rom.
Sent from my HTC One X+ using xda app-developers app

Problem after installed the third party ROM(cannot use the mobilenetworkGSM, 2G,3G,4G

Dear all,
it is the first time for me to post something in this forum, I hope you guys forgive my poor english
Anyway, I was rooted and installed the other roms but I found that I cannot use the mobile network anymore (even I checked the APN)
I hope the experts in this forum can give me some ideas to fix this problem
thx very much

Hello,
Did you perform a full wipe (Data/cache/dalvic) before you flashed a custom rom? Which rom did you flash?
Head over to the recovery and wipe the above things I have mentioned and again flash the rom and then the gapps..

vin4yak said:
Hello,
Did you perform a full wipe (Data/cache/dalvic) before you flashed a custom rom? Which rom did you flash?
Head over to the recovery and wipe the above things I have mentioned and again flash the rom and then the gapps..
Click to expand...
Click to collapse
Thanks for your reply very much, I was flashed the rom GarTot-CARBON-KK4.4.2-0228-Nexus5 in my machine and I did triple wipes as well...
Btw, wt is the meaning of "gapps"?

JACKYCYK said:
Thanks for your reply very much, I was flashed the rom GarTot-CARBON-KK4.4.2-0228-Nexus5 in my machine and I did triple wipes as well...
Btw, wt is the meaning of "gapps"?
Click to expand...
Click to collapse
Could you please share the link of the rom? From where did you download it??
If you have performed wipes correctly and flashed the rom successfully, I don't see any reason for it not to access connection(2g,3g)... You're using the kernel which came with the rom, right?
Gapps means Google Apps... You need to flash it after the rom flash usually...

I'm having the same problem! I just flashed faux kernel with ParanoidAndroid and I can't get any data connection

Bump, any ideas?

quentin0 said:
I'm having the same problem! I just flashed faux kernel with ParanoidAndroid and I can't get any data connection
Click to expand...
Click to collapse
Verify your APNs are correct
Sent from my Nexus 5

Pirateghost said:
Verify your APNs are correct
Sent from my Nexus 5
Click to expand...
Click to collapse
I believe they are correct. I tried the APN settings which looked correct that were already there, and I even tried deleting out all the APNs and recreating T-mo LTE one that I use.
I tried reflashing back to stock and I still cannot connect.
I popped my SIM into my Nexus 4 and it works perfectly, but not when it's in my Nexus 5.

Well I figured out my issue, it's super embarrassing.
I had replaced my battery because it wasn't holding a charge well anymore. Apparently the antenna on the volume button side of the phone wasn't pushed down all the way (i think it got unhooked when prying open the cover).
The reason I thought it was software was because I flashed all this stuff right after I put the cover back on. Lesson learned: change one thing at a time, will make troubleshooting easier if things go south,

vin4yak said:
Could you please share the link of the rom? From where did you download it??
If you have performed wipes correctly and flashed the rom successfully, I don't see any reason for it not to access connection(2g,3g)... You're using the kernel which came with the rom, right?
Gapps means Google Apps... You need to flash it after the rom flash usually...
Click to expand...
Click to collapse
Hi guys,
thanks for your replies, I was installed the rom made by Carbon,
https:// carbon-rom.com/downloads/?device=hammerhead
Here is my installing steps:
1. Backup all of my data,
2. Download the .zip file from the link
3. reboot into the recovery mode
4. triple wipes.
5. install the .zip frm SD card
6. reboot
7. checked the mobile network.
8. Failed (the logo of mobile signal is still the same as "Off" in the "Mobile Network", No "H", "2G", "3G" or "LTE" logo):crying:
Please tell me if I did any wrong steps in there

JACKYCYK said:
Hi guys,
thanks for your replies, I was installed the rom made by Carbon,
https:// carbon-rom.com/downloads/?device=hammerhead
Here is my installing steps:
1. Backup all of my data,
2. Download the .zip file from the link
3. reboot into the recovery mode
4. triple wipes.
5. install the .zip frm SD card
6. reboot
7. checked the mobile network.
8. Failed (the logo of mobile signal is still the same as "Off" in the "Mobile Network", No "H", "2G", "3G" or "LTE" logo):crying:
Please tell me if I did any wrong steps in there
Click to expand...
Click to collapse
After rom flash, flash the carbon gapps: http://www.androidfilehost.com/?fid=23311191640114013
Double check whether the network/apn settings are entered correctly...
You've followed all the steps correctly m8.. not sure what's causing this problem...
Did you try inserting a different sim? May be it's a sim card problem??

CyanogenMod 11

Bout damn time I made a thread
Sent from my SGH-T699 using Tapatalk

It IS about time.

ok so the cm wiki page says to use cwm. any reason i can't use twrp?

Gibson99 said:
ok so the cm wiki page says to use cwm. any reason i can't use twrp?
Click to expand...
Click to collapse
Shouldn't be any reason you couldn't use TWRP. I'm pretty sure nard himself uses it. The CWM was a CM project for a long time, and still the recovery built within it. Everyone pushes their stuff.

been running M7 for about a day now. had one fc with touchdown, my work email client, but otherwise looks good. surprised i had to manually change build.prop to set the dpi. i'm not blind, so i hate the trend towards gigantic fonts even on smallish screens like this one.
i also wasn't able to use tibu to restore securid from my old phone (vzw droid4) but i suspect that app uses some system properties like imei to create its security, so it can't be moved... not a problem. just have to do clean in stall and reimport the token.
one thing i noticed even in cm11m2 on my d4 as well as on this phone in cm11m7 is that the included sms app doesn't actually have a dark theme, and that sticks out like a sore thumb. even when you check the box for dark theme in the sms app itself, it's still white. not a huge deal obviously but doesn't match the rest of cm's normal polish.

Gibson99 said:
been running M7 for about a day now. had one fc with touchdown, my work email client, but otherwise looks good. surprised i had to manually change build.prop to set the dpi. i'm not blind, so i hate the trend towards gigantic fonts even on smallish screens like this one.
i also wasn't able to use tibu to restore securid from my old phone (vzw droid4) but i suspect that app uses some system properties like imei to create its security, so it can't be moved... not a problem. just have to do clean in stall and reimport the token.
one thing i noticed even in cm11m2 on my d4 as well as on this phone in cm11m7 is that the included sms app doesn't actually have a dark theme, and that sticks out like a sore thumb. even when you check the box for dark theme in the sms app itself, it's still white. not a huge deal obviously but doesn't match the rest of cm's normal polish.
Click to expand...
Click to collapse
The "use dark theme" option only applies to the quick reply pop up windows. The option is conveniently listed in the "quick reply" section.

orange808 said:
The "use dark theme" option only applies to the quick reply pop up windows. The option is conveniently listed in the "quick reply" section.
Click to expand...
Click to collapse
doh, you're right. my point still stands about messaging not matching the rest of cm's theming. i guess they expect people to just use chomp, go, handcent or whatever other app... i like the standard one in cm tho. except for how light it is.

What did change from the blobs for the builds after 14 /06 ?
Running 14/06 now, really good, battery charging issues are gone (i think), because a new kernel/other blobs.
Where can you find more info about blobs changes (propetary) ?

I've been having data and sms issues lately since I switched to cm11 or any of the latest 4.3.3 builds. Was there a recent radio firmware released?

Gh0sTly said:
I've been having data and sms issues lately since I switched to cm11 or any of the latest 4.3.3 builds. Was there a recent radio firmware released?
Click to expand...
Click to collapse
Which nightly?
Are you on T-Mo? Are you using a third party messenging app?
Did you wipe your data and cache before you flashed?

Gh0sTly said:
I've been having data and sms issues lately since I switched to cm11 or any of the latest 4.3.3 builds. Was there a recent radio firmware released?
Click to expand...
Click to collapse
which build are you on? i'm running cm11-20140608-Snapshot-M7 (which is 4.4.2, not 4.3.3) and have no issues to report so far. i haven't given it a full shakedown yet - still haven't tried BT or GPS but so far so good. watched netflix on the bus this morning and never had an issue. my wife and i text a lot and haven't had issues w/ that either. this evening i'm going to try out BT with my elm327 obd-ii adapter and if i have time, test audio over an avantree cara adapter. i started google maps a couple times and it found me quickly and accurately but i haven't run gps for more than a minute or so at a time so i don't know how it'll do. maybe i'll turn it on while on the bus this afternoon and see if it works well for the whole ride home.

robuser007 said:
What did change from the blobs for the builds after 14 /06 ?
Running 14/06 now, really good, battery charging issues are gone (i think), because a new kernel/other blobs.
Where can you find more info about blobs changes (propetary) ?
Click to expand...
Click to collapse
I updated ****. we're benefiting vicariously from the d2 kit-kat release
Sent from my Nexus 7 using Tapatalk

After a few minutes of playing with the CM M5 smartphone burned and became slow. Now the smartphone with the stock firmware does not burn more but it is slow. It works well this M7? You recommended me?
For a few months I used CM kitkat but I had to do a wipe. Now I do not know how to install the CM. I'm using the stock firmware.
To install:
1 rooted smartphone.
2 I copy "cm-11-20140608-SNAPSHOT-M7-apexqtmo.zip" in memory of the smartphone.
3 CWM 6.0.1.2 "install zip from sdcard -> choose zip from sdcard" I select "cm-11-20140608-SNAPSHOT-M7-apexqtmo.zip"
4 updates fail
What I'm wrong?
thanks for the help

Balthasar85 said:
After a few minutes of playing with the CM M5 smartphone burned and became slow. Now the smartphone with the stock firmware does not burn more but it is slow. It works well this M7? You recommended me?
For a few months I used CM kitkat but I had to do a wipe. Now I do not know how to install the CM. I'm using the stock firmware.
To install:
1 rooted smartphone.
2 I copy "cm-11-20140608-SNAPSHOT-M7-apexqtmo.zip" in memory of the smartphone.
3 CWM 6.0.1.2 "install zip from sdcard -> choose zip from sdcard" I select "cm-11-20140608-SNAPSHOT-M7-apexqtmo.zip"
4 updates fail
What I'm wrong?
thanks for the help
Click to expand...
Click to collapse
First, use the most up-to-date recovery; I'm pretty sure that cwm 6.0.1.2 isn't it if I see 6.0.4.7 on other devices. I like using TWRP personally, and there's a thread in this forum for that. The outdated recovery is probably the main problem right there for the failed flash.
Second, it doesn't look like you wiped anything in your steps. No factory reset, not even wiping cache and dalvik. Most people do a clean flash (that's a factory reset in recovery) when troubleshooting a failure to install a custom ROM.
Try using the latest recovery, wiping at least cache and dalvik, and see if it helps.
Good luck
Sent from my Nexus 5 using Tapatalk

reaper000 said:
First, use the most up-to-date recovery; I'm pretty sure that cwm 6.0.1.2 isn't it if I see 6.0.4.7 on other devices. I like using TWRP personally, and there's a thread in this forum for that. The outdated recovery is probably the main problem right there for the failed flash.
Second, it doesn't look like you wiped anything in your steps. No factory reset, not even wiping cache and dalvik. Most people do a clean flash (that's a factory reset in recovery) when troubleshooting a failure to install a custom ROM.
Try using the latest recovery, wiping at least cache and dalvik, and see if it helps.
Good luck
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
i second this. my steps were:
1- boot to download mode, install twrp
2- boot to recovery, flash CM
3- while still in recovery, flash gapps if you want them (make sure you have the correct version of gapps from the CM site)
4- still in recovery, wipe cache and dalvik
5- still in recovery, do factory reset
6- reboot normally (it's called 'system' in twrp) and start using phone
note that there is no need to copy/flash SU at any time because CM is already rooted.

using nightly 22/06 my phone slowed down to unusable slow, flashed 24/06 yesterday.
Never had this before on cm nightly's for the relay.
And the charging (usb) problems aren't over yet (sometimes it works fine for a few hours, sometimes a few minutes).
Did a clean install a week ago (didn't solve anything).

robuser007 said:
using nightly 22/06 my phone slowed down to unusable slow, flashed 24/06 yesterday.
Never had this before on cm nightly's for the relay.
And the charging (usb) problems aren't over yet (sometimes it works fine for a few hours, sometimes a few minutes).
Did a clean install a week ago (didn't solve anything).
Click to expand...
Click to collapse
Ok. Now, find out what version of cpu you have and get some logs to help them track down your problems.
There's a search box in the corner.
I don't have any of the problems you are describing and I am betting the developers do not, either.

orange808 said:
Which nightly?
Are you on T-Mo? Are you using a third party messenging app?
Did you wipe your data and cache before you flashed?
Click to expand...
Click to collapse
I am on T-Mo, I get this via the default android messaging app as well as hangouts, but I also have times where mobile data refuses to work as well.
Right now, I'm having this issue on 11-20140608-Snapshot-M7-apexqtmo. I did wipe data and cache before I flashed. I'm not sure what is causing my issue.
I am tempted to reflash it back to factory, and take it back under my total care and get it replaced for a S5, but I really like my keyboard. :crying:

did you wipe cache and dalvik after flashing the rom? the only quirk i've noticed on m7 is that if i don't reboot every couple of days, my work email program (touchdown) likes to get slow and crashy while composing emails. going to the recent apps drawer and closing everything there usually fixes that. gps and bluetooth work fine even at the same time and battery life is great. after having tried multiple roms on my droid4 and having gps and camera issues, i am pleasently susprised how stable cm is on this relay (which i've only had a couple weeks now).

Gibson99 said:
did you wipe cache and dalvik after flashing the rom? the only quirk i've noticed on m7 is that if i don't reboot every couple of days, my work email program (touchdown) likes to get slow and crashy while composing emails. going to the recent apps drawer and closing everything there usually fixes that. gps and bluetooth work fine even at the same time and battery life is great. after having tried multiple roms on my droid4 and having gps and camera issues, i am pleasently susprised how stable cm is on this relay (which i've only had a couple weeks now).
Click to expand...
Click to collapse
I even tried that too. My phone's about a year and a half old now. I've noticed recently if the keyboard is out, or i'm holding the phone sideways, and I get a call, the phone app crashes over and over till i rotate it upward so the display is vertical, then it stops crashing(all while the phone is still ringing so I can still answer it.)

My s7 crashes (app/UI has stopped) whenever I try to connect to new wifi network...

The problem appeared after upgrade to nougat. I tried factory reset, it was ok for the first hours and now, the problem returned.
Anyone facing the same problems?
Phone not rooted, running on official rom and problems occurs even in safe mode....

alexpen said:
The problem appeared after upgrade to nougat. I tried factory reset, it was ok for the first hours and now, the problem returned.
Anyone facing the same problems?
Phone not rooted, running on official rom and problems occurs even in safe mode....
Click to expand...
Click to collapse
Hi
How did you upgrade?
OTA , flashing??
If OTA did you upgrade al your apps , maybe one of them is making trouble
If flashing , how? and also did you upgrade your apps

Hey, thanks for the answer. It was OTA. I suppose all apps are up to date since I restored to factory settings and re-installed them.
The problem is still there even in safe mode...

alexpen said:
Hey, thanks for the answer. It was OTA. I suppose all apps are up to date since I restored to factory settings and re-installed them.
The problem is still there even in safe mode...
Click to expand...
Click to collapse
Hi
yeah is odd , i would think it has to be app related .....
When you get the error ..after you introduce the password? what about if you ask your phone to forget your old connection , it allows you to connect to the new one then?
I would try to wipe dalvik and cache from recovery and /or reflash stock rom again..maybe something went wrong at least the modem

MAX 404 said:
Hi
yeah is odd , i would think it has to be app related .....
When you get the error ..after you introduce the password? what about if you ask your phone to forget your old connection , it allows you to connect to the new one then?
I would try to wipe dalvik and cache from recovery and /or reflash stock rom again..maybe something went wrong at least the modem
Click to expand...
Click to collapse
It happens right after when I tap on the network I want to get connected to...

alexpen said:
It happens right after when I tap on the network I want to get connected to...
Click to expand...
Click to collapse
Did you try the other suggestions I mention?

MAX 404 said:
Did you try the other suggestions I mention?
Click to expand...
Click to collapse
I tried to wipe the cache with no success. I am on a trip right now, and I cannot wipe the dalvik for the moment.
I figured out a walkthrough though using a third party app called "WIFI manager". I even managed to install a certificate and use it for a connection to an "eduroam" network...