I've changed the LCD density of my C2104 but seems like it doesnt work.... some one know how to change it on our device??
Rafael Aparecido Camilo said:
I've changed the LCD density of my C2104 but seems like it doesnt work.... some one know how to change it on our device??
Click to expand...
Click to collapse
What do you mean by "changed the LCD density"? I don't think it's possible. The display has a set density and resolution, you can't change it.
You may decrease it but you can't increase the density. Am I wrong?
Outpapa said:
What do you mean by "changed the LCD density"? I don't think it's possible. The display has a set density and resolution, you can't change it.
You may decrease it but you can't increase the density. Am I wrong?
Click to expand...
Click to collapse
he change it in the build.prop
Ben Ling said:
he change it in the build.prop
Click to expand...
Click to collapse
Yes but I don't understand.
Does it just make "applications" think it's an other density or does it change more things?
It changes the complete system...
I do not want to look up the exact lines, but you would have changed the value 240 (which is standart) to maybe 220? then you should really notice a difference... there would be smaller status- and navbar and content would overall be tinier.
I always noticed a little lag of performance on my old device, thats why I didnt try it here, I could if you need prove....
Greets
Gesendet von meinem Sony Xperia L
keenofhiphop said:
It changes the complete system...
I do not want to look up the exact lines, but you would have changed the value 240 (which is standart) to maybe 220? then you should really notice a difference... there would be smaller status- and navbar and content would overall be tinier.
I always noticed a little lag of performance on my old device, thats why I didnt try it here, I could if you need prove....
Greets
Gesendet von meinem Sony Xperia L
Click to expand...
Click to collapse
That's what I wanted to mean, sorry.
Now I uderstand: I was talkin in term of hardware instead of software
Outpapa said:
That's what I wanted to mean, sorry.
Now I uderstand: I was talkin in term of hardware instead of software
Click to expand...
Click to collapse
yeah i know unfortunately, changing hardware is not possible without messing the whole sh*t up
Greets
Von meinem Sony Xperia L gesendet
keenofhiphop said:
yeah i know unfortunately, changing hardware is not possible without messing the whole sh*t up
Greets
Von meinem Sony Xperia L gesendet
Click to expand...
Click to collapse
I will try
Hi all! I used Bild.prop editor, Rom Toolbox and edit the build.prop with es file explorer, but after rebooting, the density is change, but my keyboard visibility is not full. Can anyone tell me why? On my old neo it never was a problem. Maybe the reson is that i have boatloader unlock not allowed? But i got full root, i can mount system as writable. I uninstalled some system app (Sony bloatware), and change some gapps into dark (blaked-out). So please someone help me! I would like to change to 220dpi, because on my neo that value was great!
THX!
Sent from my C2105 using xda app-developers app
dywerd said:
Hi all! I used Bild.prop editor, Rom Toolbox and edit the build.prop with es file explorer, but after rebooting, the density is change, but my keyboard visibility is not full. Can anyone tell me why? On my old neo it never was a problem. Maybe the reson is that i have boatloader unlock not allowed? But i got full root, i can mount system as writable. I uninstalled some system app (Sony bloatware), and change some gapps into dark (blaked-out). So please someone help me! I would like to change to 220dpi, because on my neo that value was great!
THX!
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
pimp my rom with the density changes.
I changed mine, the keyboard was even bigger! : D
Here is my screenshots, after some density changes. As you can see mas problem is the keyboard. Any idea?
Sent from my C2105 using xda app-developers app
caused by keyboard...
try hackers keyboard from play store. its perfect
Greets
Sent from my C2105 using xda premium
keenofhiphop said:
caused by keyboard...
try hackers keyboard from play store. its perfect
Greets
Sent from my C2105 using xda premium
Click to expand...
Click to collapse
THX for the answer. I definitly give it a try! One more question: can i use other keyboard? For example: Xperia Tablet style keyboard. I use it on my neo (I can not remember who make that flashable zip, sorry :crying.
try it pull it from your neo....
should be easy... there are so many keyboards out there there willl also be the right one for you.
Greets
Sent from my C2105 using xda premium
keenofhiphop said:
try it pull it from your neo....
should be easy... there are so many keyboards out there there willl also be the right one for you.
Greets
Sent from my C2105 using xda premium
Click to expand...
Click to collapse
THX!
Now I have change my keybord to tablet keyboard (Delete from Titanium the original and than copy the files and give correct permissions). :victory:
I like it so much, but with density change i got lesser luck :crying: don't know why
But I will keep trying until I got what I need and make my sister crying :laugh: (She's got that phone too )
Related
hi..i've tested SGSII rom in my galaxy fit..
it works pretty..
but can you help me how to get 1805 score like mr.aspire phone?
i only get 1450...CPU is too low..
and then how to overclock using no-frills?? i only can get 600mhz..
as i know mr.aspire get 806mhz speed clock..
and, can i use v6 supercharger in it?
many apps doesn't work..
hope you'll help me..
*sorry bad english
Dude 1450 is not bad at all..
I just got 1295 with my fit...
To do overclock you should has the kernel which has OC support..
Sent from my GT-S5670 using xda premium
i think big score is dosen't matter
oh..
may be the next update will fix this bugs..
guys, according to you..what's the best costum room to playing HD games??
hehehe
try cyanogen mod 7.2 by tj_style best rom for fit at this moment
Change lcd density to 120 in build.prop and reset market data.
This will sollve the market issues
Sent from my Nexus S using xda premium
davidjuke said:
oh..
may be the next update will fix this bugs..
guys, according to you..what's the best costum room to playing HD games??
hehehe[/QUOTE ]
based on my experience..you can start by using which custom rom that suits you best. custom rom that performs wells and most importantly gives stability on daily use basis. but if i may say..just my personal opinion..i would say andro.id but then again i'm not really a gamer though
Click to expand...
Click to collapse
Aspire said:
Change lcd density to 120 in build.prop and reset market data.
This will sollve the market issues
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
yeah...it's real...
thx mr.aspire...
i wanna ask 1 question...
can i change the lcd density to 110 and set the ro.product.model=GTS5830 sothat i can get HVGA display?
it is possible????
^No you cant.
Galaxy Fit has QVGA and nothing you do can change that.
Aspire said:
^No you cant.
Galaxy Fit has QVGA and nothing you do can change that.
Click to expand...
Click to collapse
hahahaha
i think it can mr,aspire,,,,,..
umm what do you mean exactly?
Aspire said:
umm what do you mean exactly?
Click to expand...
Click to collapse
i mean it can be changed to hvga display if i change product name
thank you mr.aspire..
mr.aspire, please read my thread in gafit general about micro sd.. who knows you can give me a solution
Can you tell me stepwise plz... That how to edit build.prop and reset market data.... Plzzzz. .. Im unable to download any app from market... Plz provide me a brief tutorial or provide a patch
Sent from my GT-S5670 using XDA
Open system/build.prop using root explorer and change
ro.sf.lcd_density = 110
to 120 and reboot.
Sent from my GT-S5670 using xda premium
Hi guys I'm new in the forum. First of all I want to thank all the user that will read this thread and work to make the forum absolutelly awesome. With that said, I'll like to ask if someone can help me with the DPI of Galary R/Z, I'm afraid that the phone doesn't boot anymore.
Anyone can give me a guide or something like that? Thank you so much.
PD: Yes, I saw the Noob video but please show mercy I'm not a native english, but it doesn't matter doesn't it?
PD2:I don't know if I'll ask my dude here or ask at the developer but I decided here because it will be someone with the same dude. Sorry if I'm mistaken
Bear17 said:
Hi guys I'm new in the forum. First of all I want to thank all the user that will read this thread and work to make the forum absolutelly awesome. With that said, I'll like to ask if someone can help me with the DPI of Galary R/Z, I'm afraid that the phone doesn't boot anymore.
Anyone can give me a guide or something like that? Thank you so much.
PD: Yes, I saw the Noob video but please show mercy I'm not a native english, but it doesn't matter doesn't it?
PD2:I don't know if I'll ask my dude here or ask at the developer but I decided here because it will be someone with the same dude. Sorry if I'm mistaken
Click to expand...
Click to collapse
Please make it clear buddy. .
What do you want. ...?
Sent from my GT-I9103 using xda premium
Why u wanna change lcd density?
U can use rom toolbox or similar app to mod density, goto build.prop tweak here u can change value.
If u want u can change manually also. Open build.prop in text editor.
And change the value of.
Code:
ro.sf.lcd_density
Sent from a 4.5 inch huge Stone using Tapatalk 2.
drarunmmc said:
Please make it clear buddy. .
What do you want. ...?
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I want to know which are the best DPI for the R, sorry for don't make it clear
Bear17 said:
I want to know which are the best DPI for the R, sorry for don't make it clear
Click to expand...
Click to collapse
DPI 240 is best for Galaxy R i think, if you want to change it then you need to edit Build.prop file you can try with different densities ......
Go to Build.prop and serch for "ro.sf.lcd_density" and change the value what ever you want and save it....
Yes. .240 is default. .
But 230 will give more contents per page. .
Try 230..
Sent from my GT-I9103 using xda premium
Bear17 said:
I want to know which are the best DPI for the R, sorry for don't make it clear
Click to expand...
Click to collapse
240 DPI is the default pixel density and u can go till 160 to get tablet like feel.i.e., more contents per screen
selva.simple said:
240 DPI is the default pixel density and u can go till 160 to get tablet like feel.i.e., more contents per screen
Click to expand...
Click to collapse
Thank you everyone, then if I change the DPI at 160 or 230 the phone still working properly even after boot it?
Bear17 said:
Thank you everyone, then if I change the DPI at 160 or 230 the phone still working properly even after boot it?
Click to expand...
Click to collapse
Yes it will work. .
Sent from my GT-I9103 using xda premium
Guys I have this software. when I select 160 temporary DPI it works but when I select it for permanent, it boot & stuck after Galaxy R logo.
Even my Boot logo wont work.
But yes when I edit in build.prop file it boots but wont go to menu..stuck at bootanimations but I m on cm10.1. wiped cache & dalvik cache then it boot well. One question in my mind why the software wont let it boot..??
Guys is 1280*720 Pixel is equal to
for LCD screens:
Display resolution (px×px) - 1280×720
Name - 720p
Pixel count (Mpx) - 0.92
Aspect ratio - 16:9
Screen size (in) - 13.3
Pixel pitch (µm) - 230
Resolution (px/in) - 110.4
My question is how can I set 1280*720p(in DPI) in my mobile for viewing...??
Is it DPI 230..??
hi i am trying to do a port from a rom that has a different screen resolution to the phone i want to port to i have the rom booting fine but at the wrong resolution can anyone tell me how to change this, thanks in advance
If Android: read about "ro.sf.lcd_density" option in build.prop file.
Regards
Sent from my GT-I9001 using xda app-developers app
Asmante said:
If Android: read about "ro.sf.lcd_density" option in build.prop file.
Regards
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
hi thanks for the reply yes it is android and i tried to change the density but there is no option in the build.prop file can i just add it with the density i want will that work?? i am wanting to change the density before i flash it to the phone
deanstead2k10 said:
hi thanks for the reply yes it is android and i tried to change the density but there is no option in the build.prop file can i just add it with the density i want will that work?? i am wanting to change the density before i flash it to the phone
Click to expand...
Click to collapse
Yes if u add an additional line in that...describing the dpi it would work
Sent from my Samsung GT-S9081 using xda app-developers app
del
cold_start said:
Hi. I've got the question too. Can I edit build.prop right on my device? Will it boot after that? I want to make text areas (in menus, for example) smaller so I could see more text on the screen. Or I just should make an update.zip and flash it via CWM recovery?
Click to expand...
Click to collapse
U can edit it directly
Sent from my Micromax A110 using xda app-developers app
cold_start said:
Hi. I've got the question too. Can I edit build.prop right on my device? Will it boot after that? I want to make text areas (in menus, for example) smaller so I could see more text on the screen. Or I just should make an update.zip and flash it via CWM recovery?
Click to expand...
Click to collapse
Download build.prop editor if you want to do more things with your device...or download density changer if you only want to change density...
Lots of apps are available on play store to do this...
Lower value =high resolution effect
Higher value =low resolution effect
One advice...
Keep in mind...
Some manufacturers modified their own ui over stock...which might causes some issues...
So... better to install another launcher... before applying... (third party launchers are able to catch any resolution...)
Just a small but useful thread
Had loads of requests for this font and saw everybody downloading 3rd party apps to get it ect.
For those of you that haven't seen the font, it can be seen here - http://www.ffonts.net/Sony-Sketch-EF.font
Look awesome on the phone.
This tricks the phone to think its stock fonts.
Instructions.
Go to settings / display / font style/ and change your font to Samsung Sans
Place zip on SD card and flash through CWM
Reboot
Switch font back to default
Done.
Font Download - https://hotfile.com/dl/224260368/5207946/sonysketchfont.zip.html
:good: yaaay new font. will try it out
A huge thanks for their work and effort.
nice greetings
Was waitin for this... thanks
Sent from my GT-I9505 using xda premium
No problem guys, thanks . .
Good day, I can flash the zip even with a Cm Rome. Nice greetings
Gesendet vom GT-I9505 mit Tapatalk 4 ?
Thx good work
Sent from my GT-I9505 using xda premium
Support Greek letters?
I got it working only for browser. For Status Bar Clock and System Font it's still old Samsung Sans. Is it supposed to be like this?
Hi. I can i go back and restore for deafult font?
Thanks.
Sent from my GT-I9505 using xda premium
I couldn't get it to work at all. Went back into settings and it has the font there but says it's unavailable. Not rooted so that maybe the cause. Thanks anyway.
PS: Downloaded iFont from the playstore (it's free) and installed Sony Fetch using this and it worked perfectly. Hope that helps.
OzBoy1 said:
I couldn't get it to work at all. Went back into settings and it has the font there but says it's unavailable. Not rooted so that maybe the cause. Thanks anyway.
PS: Downloaded iFont from the playstore (it's free) and installed Sony Fetch using this and it worked perfectly. Hope that helps.
Click to expand...
Click to collapse
followed OP's instructions as well and it did'nt work. i changed my font from samsung sans to default font and it worked. u might try it as well
P.S. ur not rooted so how did u flash it with CWM?
nanoy009 said:
P.S. ur not rooted so how did u flash it with CWM?
Click to expand...
Click to collapse
You can flash through stock, vol up and front button, then press power, hold til boot screen, let power go and bingo you can flash. Not as many options as CWM.
No way to get the default font back ah? I didnt backup the original font before flash.
Sent from my GT-I9505 using xda premium
I can confirm that there is one more step to make it fully work
After flashing, switch from Samsung Sans to Default.
Acuap said:
I can confirm that there is one more step to make it fully work
After flashing, switch from Samsung Sans to Default.
Click to expand...
Click to collapse
Thanks, updated OP
Thanks for the fonts - good job
Thanks for helping guys...
Sent from my GT-I9505 using xda premium
Hi. U dont help me because im jew? I asked 2 times if there is a way to flash back the original font and i got full ignore. Please help..
Sent from my GT-I9505 using xda premium
davidz85 said:
Hi. U dont help me because im jew? I asked 2 times if there is a way to flash back the original font and i got full ignore. Please help..
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Lol you probably think the whole world is against you.
I'm sure he just missed your question and doesn't mind your jew!
Sent from my GT-I9505 using xda premium
Hi guys,
I've been using the smaller softkeys mod on my old Xperia Z for half a year now (24dpi size) and just can't and don't wanna get used to these huge and annoying stock softkeys...they are so large and ugly and take away so much screenspace.
Can anybody make a flashable zip or something to make them smaller? That'll be great!
Thank you.
drsoran2 said:
Hi guys,
I've been using the smaller softkeys mod on my old Xperia Z for half a year now (24dpi size) and just can't and don't wanna get used to these huge and annoying stock softkeys...they are so large and ugly and take away so much screenspace.
Can anybody make a flashable zip or something to make them smaller? That'll be great!
Thank you.
Click to expand...
Click to collapse
You can try Xposed and Xpeira V Mods
There is option for 48, 36 & 24dpi
Sent from International Space Station
drsoran2 said:
I've been using the smaller softkeys mod on my old Xperia Z for half a year now (24dpi size) and just can't and don't wanna get used to these huge and annoying stock softkeys...they are so large and ugly and take away so much screenspace.
Can anybody make a flashable zip or something to make them smaller? That'll be great!
Thank you.
Click to expand...
Click to collapse
+1 :good:
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
soxxo said:
You can try Xposed and Xpeira V Mods
There is option for 48, 36 & 24dpi
Click to expand...
Click to collapse
do you mean this?
http://forum.xda-developers.com/showthread.php?p=40214768
Works like a charm!!!!!
guybrush2099 said:
+1 :good:
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
do you mean this?
http://forum.xda-developers.com/showthread.php?p=40214768
Click to expand...
Click to collapse
Yes or XBlast Tools
Sent from International Space Station
Both Xblast tool or Xperia V mod still give me the back button bug
Anybody has a solution?
Gesendet von meinem C6903 mit Tapatalk 2
Are you saying you want the bug?
Lol
Sent from my C6903 using xda premium
gregbradley said:
Are you saying you want the bug?
Lol
Sent from my C6903 using xda premium
Click to expand...
Click to collapse
Lol , sorry , edited . Im not very good at english hehe
Gesendet von meinem C6903 mit Tapatalk 2
I'll wait the hero creates flashable soft keys 36+32 (the same mod we knew on the XZ) :angel:
I'm happy to make a flashable zip for this. It's a pretty simple mod to do..once you know how.
The problem is I've just got the ordinary Z (why didn't I wait a few months?!) so I'll need some files from somebody.
I'll need:
system/framework/framework-res.apk
system/framework/SemcGenericUxpRes.apk
system/app/SystemUI.apk
system/vendor/overlay/android-res.apk
That should do it.
Sent from my C6603 using XDA Premium 4 mobile app
Ticklefish said:
I'm happy to make a flashable zip for this. It's a pretty simple mod to do..once you know how.
The problem is I've just got the ordinary Z (why didn't I wait a few months?!) so I'll need some files from somebody.
I'll need:
system/framework/framework-res.apk
system/framework/SemcGenericUxpRes.apk
system/app/SystemUI.apk
system/vendor/overlay/android-res.apk
That should do it.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here are three out of four files. Unfortunately, I can't find the last file in the folder which you've specified. Please have a look at the attached screenshot which shows what's in this folder. Maybe it has a different name now or was moved to another location?
https://dl.dropboxusercontent.com/u/82357813/files for mod.zip
I'm on latest .534 Xperia Z1 firmware.
deleted.
look here http://forum.xda-developers.com/showthread.php?t=2465514
glitschi667 said:
hi,
not quite sure, but if I look at the script that generates the mod files for me - it seems as if the SystemUI.odex is also needed.....
messing with the xml file to fix the back button problem seems do require new odexing from the system...
I've started this morning to download an image of your firmware because I wanted to test my softkey mod creation script.... Now I downloaded the deodexed stock firmware, since I had problems extracting system.sin.....
edit:
ok. I had to change the scripts a bit since they worked via adb to get the files needed but since I also do not have the Z1..... so I cannot test.... and this may be a bit risky...
somebody willing to try out?
DO A BACKUP FIRST!
Click to expand...
Click to collapse
you would need a working recovery for locked bootloaders to test this out. Is there one already?
drsoran2 said:
you would need a working recovery for locked bootloaders to test this out. Is there one already?
Click to expand...
Click to collapse
what's this:
http://forum.xda-developers.com/showpost.php?p=45897998&postcount=36
maybe this?
http://forum.xda-developers.com/showthread.php?t=2455959
EDIT:
but not sure if they are working....
what you can do:
take the framework-res-overlay-navbarXX.apk out of the zips above and put it into /system/vendor/overlay/
if you then have smaller softkeys, that would be step one.
I can give you a new SystemUI.apk to fix the "big back button" problem...if it is there....
glitschi667 said:
what's this:
http://forum.xda-developers.com/showpost.php?p=45897998&postcount=36
maybe this?
http://forum.xda-developers.com/showthread.php?t=2455959
EDIT:
but not sure if they are working....
what you can do:
take the framework-res-overlay-navbarXX.apk out of the zips above and put it into /system/vendor/overlay/
if you then have smaller softkeys, that would be step one.
I can give you a new SystemUI.apk to fix the "big back button" problem...if it is there....
Click to expand...
Click to collapse
what would happen if I did this and reboot? Could it be that I don't have any softkeys at all?
As a safeguard, is it a good idea to enable and autostart an app like "Auto hide softkeys" which brings its own softkey nav bar? I could use this to navigate if the other option fails? Or is it also tied to the stock soft keys?
I guess I'm not brave enough (yet) to test it out . I just finished setting up my Z1 a few days ago and everything is running smoothly and I don't want to mess with it.
I'll have to get annoyed enough with the stock keys or my current replacement (Auto hide softkeys) in order to take the plunge.
drsoran2 said:
what would happen if I did this and reboot? Could it be that I don't have any softkeys at all?
As a safeguard, is it a good idea to enable and autostart an app like "Auto hide softkeys" which brings its own softkey nav bar? I could use this to navigate if the other option fails? Or is it also tied to the stock soft keys?
I guess I'm not brave enough (yet) to test it out . I just finished setting up my Z1 a few days ago and everything is running smoothly and I don't want to mess with it.
I'll have to get annoyed enough with the stock keys or my current replacement (Auto hide softkeys) in order to take the plunge.
Click to expand...
Click to collapse
If it does not work, nothing should happen actually... Worst case: no softkeys.. fix: open a root explorer, navigate to system/vendor/overlay and delete the apk....
glitschi667 said:
hi,
not quite sure, but if I look at the script that generates the mod files for me - it seems as if the SystemUI.odex is also needed.....
messing with the xml file to fix the back button problem seems do require new odexing from the system...
I've started this morning to download an image of your firmware because I wanted to test my softkey mod creation script.... Now I downloaded the deodexed stock firmware, since I had problems extracting system.sin.....
edit:
ok. I had to change the scripts a bit since they worked via adb to get the files needed but since I also do not have the Z1..... so I cannot test.... and this may be a bit risky...
somebody willing to try out?
DO A BACKUP FIRST!
Click to expand...
Click to collapse
Tries this and the nav bar goes smaller
But the big back button is still there,
Would u share the system UI to fix the bug?
Gesendet von meinem C6903 mit Tapatalk 2
chitose_ndy said:
Tries this and the nav bar goes smaller
But the big back button is still there,
Would u share the system UI to fix the bug?
Gesendet von meinem C6903 mit Tapatalk 2
Click to expand...
Click to collapse
That's easy enough to fix. We'd need to edit the navbar.xml and remove the 'android:scaleType' bit of code from the back softkey line.
Sent from my C6603 using XDA Premium 4 mobile app
chitose_ndy said:
Tries this and the nav bar goes smaller
But the big back button is still there,
Would u share the system UI to fix the bug?
Gesendet von meinem C6903 mit Tapatalk 2
Click to expand...
Click to collapse
sure...
here we go....
you need to delete SystemUI.odex inside /system/app
and replace SystemUI.apk with the attached one. make sure it has 644 permissions. ("chmod 644 /system/app/SystemUI.apk")
But please do a backup and enable USB debugging before deleting anything! so you might have a chance to revert your changes if something goes wrong....
und vielen dank fuers testen!!!
EDIT: attachment did not work. REMOVED!
Ticklefish said:
That's easy enough to fix. We'd need to edit the navbar.xml and remove the 'android:scaleType' bit of code from the back softkey line.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where could i find the navbar.xml?
Gesendet von meinem C6903 mit Tapatalk 2