Database Info

@ashwani.rock2

@ ashwani.rock2... bro download rom manager first and follow the procedure as u read previously... Or if this not helped u ...then just copy. clockworkmod file i.e. recovery.img. In the place of stock recovery...into v2 rom folder. go to sp tools.. select scatter loading file and untick all ....except recovery ... flash it

Xolo A800 custom Roms

This thread has been made to monitor updates on custom roms being built for our phone

For reverting back to ics
https://www.dropbox.com/s/sf5g3lny81epyms/xolo_a800_s109_20130121.zip
download this zip file and extract it
open Sp flash tool preferably 3.1304 and select the scatter file given in the folder
it will automatically select all the files necessary click firmware upgrade
Volla!!!!!! u r back on ics again.

Upgrade canvas 2 to jellybean

THERE ARE MANY WAYS TO UPGRADE UR CANVAS 2 TO JELLYBEAN.SO TODAY I AM DISCUSSING ALL THE METHODS IN THIS SINGLE POST.
THE FIRST METHOD....
the first way that is most often searched is to upgrade canvas 2 to official unrooted jellybean that is realeased by micromax.
I had already made a complete tutorial of this in my pevious thread. So if u want to upgrade to stock unrooted jellybean rom (i.e. v3) go the this link-
Link: http://forum.xda-developers.com/showthread.php?t=2368391
U CAN ALSO FLASH SUVI ROM V9 AS IT IS SP FLASH TOOLS FLASHABLE.ITS PROCEDURE OF FLASHING IS DAMN SAME AS MENTIONED IN ABOVE THREAD.
FLASHING SUVI ROM V9 METHOD CAN ALSO BE USED IF U ARE GETTING ANY KINDA ERROR IN ROOTING UR FONE OR PORTING CWM LIKE BROM ERROR:S_DA_SOC_CHECK_FAIL(3013) AS THIS ROM IS PRE ROOTED.
SECOND METHOD.......
The second method is to upgrade already rooted canvas 2 to rooted jellybean roms.
1.first of all download the stock jellybean zip file and place it in the root of ur fone's sd card i.e. outside any folder(just for sake of convinience).
LINK:
d-h.st/jGx
THIS IS A PRE ROOTED BUT SAME AS OFFICIAL JELLYBEAN ROM
2.boot into recovery by holding vol up+ vol down +power buttons simultaneously.
3.now wipe data/factory reset and also wipe cache partition.
4.go to advanced and wipe delvic cache.
5.now go back and select install zip from sd card and then choose zip from sd card.
6.locate the zip file and select it.let the installation complete.
7.go back and select reboot fone now.
WITH THIS U HAVE SUCCESSFULLY UPGRADED UR CANVAS 2 TO JELLYBEAN.
THERE ARE ALSO MANY OTHER JELLYBEAN ROMS FOR CANVAS 2. i am listing a few here.
1.jmp rom-LINK:
goo.im/devs/jigarmpattani/Micromax_A110/JMP_Jelly%20Bean/JMPv11.5_JB-4.1.1_25-May-2013.zip
2.suvi rom-link:
d-h.st/Imy
3.raven rom-link:
https://docs.google.com/file/d/0ByHiJVjjrE83ZnVRZDBFZ0pJQnM
4.lewa os-link:
d-h.st/y9T
5.dr bhokhali rom-link:
d-h.st/mg2
AND MANY MORE..
VERYY IMPORTANT- PLEASE MAKE SURE THAT U HAVE A FILE NAMED BOOT.IMG IN UR ZIP FILE OF DOWNLOADED ROM.
IF U CANNOT BOOT.IMG FILE IN UR ROM THAN *DO NOT* DIRECTLY FLASH IT. FIRST FOLLOW THESE STEPS.
1.download boot.img file from below link
link:d-h.st/sgS
2.now extract ur rom'zip file using winrar or 7zip to any specified folder.
3.paste the above downloaded boot.img file in that folder and then zip it again using winrar or 7zip.
PLEASE MAKE SURE THAT U *ZIP* ALL THE FILES OF THE EXTRACTED FOLDER AND NOT THE FOLDER ILSELF.
IF U DONT PLACE BOOT.IMG IN UR ROM THAN U WILL SIMPLY BE STUCK AT BOOT LOGO.
WELL WITH ALL THIS *MESS* U WILL BE ABLE TO UPGRADE UR CANVAS 2 TO JELLYBEAN.
hit thx:thumbup: if i helped...

[GUIDE] How to flash stock/custom kernel without using recovery or odin

Here is a meathod to flash stock/custom kernel using UKF for those who are new to these things
Q: What is UKF ?
UKF is UNIVERSAL KERNEL FLASHER developed by @frapeti Original thread
Playstore link- https://play.google.com/store/apps/details?id=com.frapeti.ukflash2
Prerequisites-
1. A Galaxy S4 (I9500/I9505)
2. The phone must be rooted
3. Any Stock/Custom kernel
Procedure-
-For Stock kernel
1. Download UKF from Playstore.
2. Extract the Firmware package whose kernel you want to flash there u will get boot.img file.
3. Copy that boot.img file to your SD card
4. Open UKF, Press "Select a Kernel Image (bin/img/md5)"
5. Select that boot.img file that you previously copied to your SDcard
6. Then Press 'Flash Kernel Image'
7. Thats it click on reboot and its done
-For Custom Kernel
1. Download UKF from Playstore.
2. Extract the .zip file of the kernel you want to flash.You will get a file with .img , .bin or .md5 extension
3. Copy that file to your SD card
4. Open UKF, Press "Select a Kernel Image (bin/img/md5)"
5. Select that file that you previously copied to your SDcard
6. Then Press 'Flash Kernel Image'
7. Thats it click on reboot and its done
This meathod is more useful for those who want to flash stock kernels as their flashable zips are not available.
Others who may not want to use custom recovery can find it useful
BUT DO IT CAREFULLY SELECTING WRONG IMAGE FILE CAN RESULT IN HARDBRICK TOO
HIT THANKS IF YOU FIND IT USEFUL

Bump
Sent from my GT-I9500 using XDA Free mobile app

[Guide]How to restore Blue Bean ROM in Karbonn A1+

1.DownloadCWM V6.0.3.3:
2.Download Mobile Uncle Tools from Play Store
3.Place downloaded recovery in root of sd card[means not in any folder in sd card]
4.Install mobileuncle tool :good:
5.Open mobileuncle tool click flash recovery from sdcard allow root permission and click ok
6. Thats it:good::good:
After that , download blue bean rom:cyclops:
Make a working stock rom backup!!!
1.Extract 7z file place the extracted folder to clockworkmod>backups/here
Now boot to recovery then simply Restore Backup. Thats it:good::good: