Database Info

Nexus One Gingerbread OTA Links inside. (Developers Only)

This file is not for Desire users, it should NOT be flashed to your Desire. This is for DEVELOPERS only.
And here it is!
http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip
Update
Another mirror, kindly provided by XDA member Hollow.Droid:
http://www.multiupload.com/ZOWE7II3TY
Two more links, brought to you by Jorijn:
http://dl.dropbox.com/u/4786770/81304b2de707.signed-passion-GRI40-from-FRG83G.81304b2d.zip
http://cloud.jorijn.com/4pNY

Could an admin/mod change the title of this thread to reflect the fact that the URL is given here?

That OTA file can be usefull for cookers, is not flashable zip for our desire
EDIT: Note the difference, is not for developer (nothing to develop, as no source code in that), is for cookers

OK I have edited the OP a little bit.
As usual, please remember this is for developers only, do not post questions or general discussion or thanks here. Off-topic posts will be deleted.
Thanks...

Mirror #1: http://dl.dropbox.com/u/4786770/81304b2de707.signed-passion-GRI40-from-FRG83G.81304b2d.zip
Mirror #2: http://cloud.jorijn.com/4pNY (Amazon S3)
Here you go, now make me a nice Desire ROM.

Mirror
http://www.multiupload.com/J47XA0VUPZ
Another uploaded for u all

Anybody with a nexus one can install the ota and give a nandroid backup here?

animehq said:
Anybody with a nexus one can install the ota and give a nandroid backup here?
Click to expand...
Click to collapse
Why you want a nandroid backup if we can compile it from source?

pin this up please?

Moto backflip 2.3

the title says it all. but i need some help. like a huuuge favor from someone. i been trying for hours and hours trying to get the password to show for the GApps zip file and its just not showing for me. so i was wondering if someone would be really generous as to try and get the password to show by doing the whole survey thing and then possibly sending me the password or a link to download the GApps with the password already entered into the locked zip file. all i need is the GApps for Gingerbread 2.3.4 – Motorola Backflip zip file. if someone can do this for me, id really really appreciate it. the link is down below.
http://www.techgeekguy.com/2011/07/...ip-android-gingerbread-2-3-4-cyanogenmod-7-1/

Same here!!!

nice game!
this is one of the best games iv played to date!

Hey guys, google is your friend! Use it, modmymobile. Com has a free version of gapps for download.
From my 4G Infused via XDA Premium App

you can use this one http://www.megaupload.com/?d=05KMTTG0 is same gapps line the original one

Vegacomb 3.2 Build Download links.

How do we know, Multiupload.com is down so I decided to upload Vegacomb, ModdedStock relese to all those who are interested.
Here you are :
VegaComb_HC3.2_Build9n.zip
http://www.filefactory.com/file/c3b907a/n/VegaComb_HC3.2_Build9n.zip
VegaComb_HC3.2_Build9n_update3.zip
http://www.filefactory.com/file/c3b966f/n/VegaComb_HC3.2_Build9n_update3.zip
VegaModdedStock_v1.10_v2.exe
http://www.filefactory.com/file/c3b9585/n/VegaModdedStock_v1.10_v2.exe
Full_Screen_HDMI_Fix.zip
http://www.filefactory.com/file/c4f5dfb/n/Full_Screen_HDMI_Fix.zip
Skype Version 2.5.4.162 video calling working with Vegacomb 3.2
http://www.filefactory.com/file/c4f51c1/n/skype_v2.5.4.162.apk
Enjoy....

Thanks dude
Sent from my Nexus One using XDA

Hi!
It's good to make another thread, because in main thread others might've missed what you and I posted.
Here is a post on XDA that mentions ALL LINKS (for HoneyIce, VegaComb, Corvus5, ModdedStock, Stock).
Direct link to tabletroms' topic with all links!
Badbullet only posted N versions.

When I saw this I got very excited and installed Skype 2.5.4.162 on my Vegacomb 3.2 9n. However when I do a test video call, I hear the person and it says "initializing video" then the app bombs out and I go back to my homepage.
:-(
I really would love Skype video to work on my Vega! Does anyone have any ideas why this is happening?
Thanks
Jonny

hi, i cant seem to find a working download link for the 3.2.4 update zip for the 9n version. If someone could kindly help, it would be mostly appreciated

Cannot find working down
Cannot find working down for {VegaComb_HC3.2_Build9n.zip}
Can anyone point me in the right direction please
kind regards Paul

Couldn't be a worse place to drop the files... it's a nightmare to try and download anything from filefactory.... giving up... giving up on Android...

asrdias said:
Couldn't be a worse place to drop the files... it's a nightmare to try and download anything from filefactory.... giving up... giving up on Android...
Click to expand...
Click to collapse
I have sent a private message to corelx if he could provide us with different links.
Besides why do you want to install Vegacomb?
Why not try the newest VegaCream?

Update on the download links!
As user "fiocco" mentioned in "Vegacomb" thread, there are new working links for: Moddedstock, Vegacomb and Honeyice.
To keep all links together I'm posting the link to tabletroms also here:
http://www.tabletroms.com/forums/vega-rom-development/4338-multiupload-com-down-vegacomb-moddedstock-can-found-here.html

Lkkslsnxnnxmmmymylsčs

[Q] Rooting shv e120k Samsung galaxy s 2 hd lte

Hi, i just bought the samsung galaxy 2 hd lte (SHV-e120K) and i was looking to root it. i couldn't find anything anywhere except for this website in Chinese that has the file downloads and instructions for the process. i read through the instructions through google translate, but not everything was clear. first of all, has this worked for anyone???? and if so can someone properly translate the instructions so i can root it properly. i don't want to take any risks.
here's the website in chinese (delete spaces between the dot and com, and between the dot and html):
bbs.gfan. com/android-3584203-1-1. html
thank you!!

nawara said:
Hi, i just bought the samsung galaxy 2 hd lte (SHV-e120K) and i was looking to root it. i couldn't find anything anywhere except for this website in Chinese that has the file downloads and instructions for the process. i read through the instructions through google translate, but not everything was clear. first of all, has this worked for anyone???? and if so can someone properly translate the instructions so i can root it properly. i don't want to take any risks.
here's the website in chinese (delete spaces between the dot and com, and between the dot and html):
bbs.gfan. com/android-3584203-1-1. html
thank you!!
Click to expand...
Click to collapse
There is this thread http://forum.xda-developers.com/showthread.php?t=1484547
but for now, there isn't a 'rooted kernel' for the more recent updates that you got OTA or via Kies.. so check my comment .
about reverting to the older stock rom. You might want to wait for ICS and a rooted kernel before going through the trouble of rooting.

WIth E120K, have you tried using the LTE service already? I am really wondering whether the LTE service work outside of Korea, especially in Australia. thanks

LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.

hexavier said:
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
Click to expand...
Click to collapse
look in My Android Collections

hexavier said:
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
Click to expand...
Click to collapse
Google --->>> rootzwiki: shv-e120k <<<---
There you will find all you need including links to Tegrak's recovery and kernel builds for UF29 firmware.
There's no kernel and recovery for the latest -- UK08 firmware (it isn't JB There are a few requests on Tegrak's blog for a kernel and recovery for the UK08 firmware so I doubt we will wait long - Tegrak is always on the ball

hexavier said:
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
Click to expand...
Click to collapse
Google --->>> rootzwiki: shv-e120k <<<---
My Signature has the link to the thread - updated links for Tegrak's recovery and kernel builds for UE14, UF29 and UK08 firmware (Android 4.0.4)
And CM10 for E120K too

Proscan PLT 7035B - connect to PC, upgrade to JB and rooting with Play Store

Details of how to connect to PC, upgrade to JB and rooting with Play Store in posts #3 and #4.
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Model #: PLT7035-B
Processor: Rockchip 2906
1.2 GHz processor
7" capacitative touch screen
ICS 4.0.4
4GB flash memory (expandable up to 32 GB with micro SD card)
512 MB ddr3 RAM
Front facing camera
800 x 480 resolution
Wifi 802.11 B/G/N
Pre-loaded GetJar app
Kernel version
3.0.8+
[email protected] #260
Build number
rockchip
rk29sdk-eng 4.0.4_20121114
Click to expand...
Click to collapse
In the next couple of posts, will try my best to explain in detail the steps that I took to upgrade my tablet from ICS 4.0.4 to JB 4.1.1 and successfully root as well as have CWM installed along with Google Play store.
Cheers

Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/4657640-post1.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the remaining steps in this thread at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.

Jelly Bean 4.1.1 Update:
Proscan Model Number PLT7035-B has it on their official site:
http://proscanvideo.com/item.asp?itemnmbr=PLT7035-B
Firmware:
-------------
4.0
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.0.ZIP
4.1
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.1.ZIP
Manual
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_ENFR.PDF
As always - statutory warning - neither me nor the forum are liable for any damages to your tablet - do it at your own risk - no one other than you alone is liable for any damages arising from the usage of this guide.
How to upgrade the firmware after downloading it from above link:
Get the RKBatchTool
First of all - ensure that your tablet is FULLY charged.
Unzip the RKBatchTool v1.5 to your desktop
Turn off the tablet and disconnect from the PC.
Now press the Volume Up (+) button and keep holding it down.
Here comes the slightly tricky maneuver - you have to keep pressing the volume UP (+) button and connect at the USB at same time in to the PC. The tablet will power up on it's own but the screen will remain blank
Once the PC starts searching for the driver, you can release the volume button.
Windows will prompt you for drivers for "RK29 device".
Use appropriate drivers from the driver folder.
Have attached some pictures collected from the web (it is just to give a visual idea as an aid to the walk through and may not be detailed nor accurate in every aspect since some of them are from instructions for other devices).
Run the RKBatchTool v1.5.
Click on first button at the left bottom end of the tool screen - this is a toggle for Chinese/English versions.
In the "FW Path" load the update.img file by clicking on the top right side button with the three ... dots
The following will appear in the status box after the "connected devices" box turns green.
Loading firmware...
Loading firmware Finished.
I clicked "Upgrade" (even though the picture says restore).
Your previously green colored box of "connected devices" will now keep flashing in yellow.
Sit back and have fun watching the status box - will probably take a couple of minutes for the whole process and verification.
When it is all done with - the tablet will reboot.
Remember that the first boot would take a longer time than usual powering up time - so just be patient.
All the best.
Image credits : Dave S:
Attached below are the pics from Proscan site Powerpoint.

I have successfully rooted it twice and installed Play Store (once with ICS and now with JB)
First time it was with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Now I tried the [RK29][TOOL] Root RK29 Tab Toolkit since the sdk was already installed.
Very simple and super effective rooting process.:good:
The first time when I ran in to driver installation issues it was pertaining to permissions.
Found work-arounds elsewhere and also had issues with the installing google playstore.
Hence used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installing CWM was also a breeze - thanks to the great work of fun_ . It is a simple process if you follow his guidelines :good:
He has been very kind to upload an exclusive CWM-based Recovery image for ProScan PLT7035-B (ext4)
Click above link to d/l it and follow installation instructions
--------------------------------------
Precautionary measure - the following is just in case something goes wrong and you want to revert back (and also to have a copy of original images) :
I used the romdump technique and following Oma's suggestion have created the kernel, boot, recovery and system images in SD card for ICS 4.0.4 of Proscan PLT7035-B
http://www.4shared.com/zip/UtCs-yCE/Proscan_PLT7035-B.html
Above link upload to 4share is exclusively for the Proscan PLT7035-B (ICS 4.0.4) and hopefully has not been corrupted because my internet connection has been flubbing for past few days.
Have fun and remember to use caution because you alone are responsible if you brick your device.
Cheers

yes ok
vulcanize said:
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/sony-erics...om-kernel-cwm-firmware-flashing-adb-root.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the steps at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.
-----------------------------
I have successfully rooted it and installed Play Store with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Ran in to driver installation issues and found work-arounds elsewhere and also with the google playstore from above link.
Used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installed CWM using steps from thread [CWM] CWM-based Recovery for RK3066/RK2918 devices with the help of fun_
----
I would love to have a suitable kernel on this Rockchip based model to flash Oma's JB.
Any ideas/suggestions????
Thanks in advance.
Cheers
Click to expand...
Click to collapse

Rooted stock Jelly Bean 4.1.1 with Play store screen shot from the Proscan PLT7035-B with RK2906
Details of how-to in the third and fourth post from top.

A BIG THANK YOU TO Oma7144 :good:
RK2906 Tab Proscan PLT7035-B now joins his list and rocks with Jelly Bean Custom Rom! Click here if you want to try it out.
Am loving it.
Thanks to him the Kernel for the PLT7035-B can be found here
Or click here for direct download.
Looking foward to the stable CM10 version.
Cheers.

This is an update from my end with regards to the JB 4.2.2 Multi-Window by Oma on the RK29
http://crewrktablets.arctablet.com/?p=1661
Check it out
------------------------------
There is also a Second Test Build CM10.1 (Thanks Oma) on Proscan PLT7035-B
Tried the CrewRKTablets_RK29_Loox_CM10.1_4.2.1_20130113.7z along with CrewRKTablets_Format NAND.zip with the custom kernel made by him on his ICS thread.
Am very happy to say it is working great so far except for the spotty wi-fi at times and also screen rotation (needs sensor/rotation calibration).
Please remember that it is still a test build.
Cheers.

pondering
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.

crhm said:
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.
Click to expand...
Click to collapse
NO!!!!
It is meant for the 7035-B. Someone else flashed the wrong ROM and the message is quote below.
capfl2k5 said:
Proscan/Curtis PLT7035-PL
Sooo I had a moment of derrrr and flashed the jellybean upgrade for the PLT7035-B to my 7035-pl. Boots up (quickly I might add) and goes to the lock screen but I have no touch control over the screen. Does anyone have an image of the original firmware for this tablet? Or any Idea on how I can regain control of the touch screen?
Source: http://androidforums.com/general-tablet-talk/682172-proscan-curtis-plt7035-pl.html
Click to expand...
Click to collapse
But you can do all the rooting and install CWM along with playstore as mentioned in post 4 since fun_ has a generic CWM on his site.
http://forum.xda-developers.com/showpost.php?p=37221496&postcount=4
Would also appreciate it if you could kindly do a romdump of your 7035-PL and host the Boot, Recovery And System Partition Images to help people like capfl2k5 whose post from another forum is quote above.
Also try requesting Oma for a suitable kernel in his JB custom rom thread http://forum.xda-developers.com/showthread.php?t=1903745 and you will be all set. I really like that rom he has built.:good:
And then you could also try the CM 10.1 with that same kernel

I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2

crhm said:
I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
As mentioned in post # 4 in previous page
Download the Play store apk
How to install:
Rename it to Vending.apk
Paste it in system/app
Change permissions to rw-r--r--
Reboot if needed
http://forum.xda-developers.com/showpost.php?p=32731467&postcount=1
Courtesy: Kakashi Hatake

I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2

crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
Great.
Hope you followed Oma's advice for the romdump images.
http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
As for CWM - it is very simple and straightforward thanks to the great work by fun_
http://forum.xda-developers.com/showthread.php?t=2102679
Clicking the link at the top of his post will take you to his site where there is a nice walkthrough.
Now the proscan PLT7035-B that I have currently is running on the custom rom - Oma Odys Loox JB 4.1.1 V1.2.3a and I might have just enough time with the tablet to make it to 4.2.2 version.
Cheers

Have been using Orange Backup (by snoopy33) on the proscan and loving it.:good:
Playstore:
https://play.google.com/store/apps/details?id=com.pommedeterresautee.twoborange3
xda:
http://forum.xda-developers.com/showthread.php?t=2040507
Suits the need of lazy folks like me

crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
crhm said:
I put the plt 7035-pl files on mediafire. I hope it helps. Iam trying to build a recovery file for cwm. I hope to make a little progres there soon.
I will try and help when I can. I just have to quit thinking webos and maybe it will go faster.:good:
Recovery.img
http://www.mediafire.com/view/?5v04gu0c2ow8cx1
Kernel.img
http://www.mediafire.com/view/?6ztdrpr217h1dos
Boot .img
http://www.mediafire.com/view/?tt9fdttjxankm1i
Click to expand...
Click to collapse
Cheers.

Ubuntu Installer for Android
Was wondering if this cheap dual core tab could handle Ubuntu and used the app from following link to install an older version of Ubuntu
http://www.mediafire.com/?5ru3tzddteciahd
Process is very simple and the app gives a detailed walk through. Am in the process of upgrading the versions now
Kudos and all credits to the original devs because I saw it on a site that did not name them.
For newer version of the install app visit the linux on android website:
http://linuxonandroid.org/downloads/
Cheers.

vulcanize said:
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
Cheers.
Click to expand...
Click to collapse
Just a mirror created for the PLT7035-PL kernel, boot and recovery images (originally posted by crhm)
https://www.dropbox.com/sh/hxky38cnck1m0oq/GXvk4Onc9F

JB 4.2.2 on the Proscan PLT7035-B
Unofficial AOSP 4.2.2 on rk29board ! thanks to Oma
http://forum.xda-developers.com/showthread.php?t=2162760
:good:

As soon as I get my recovery fixed I was thinking of using a copy of recovery and port it to mine fix it where it could be flashed with rktool if need be
Sent from my Galaxy Mini (SGH-T499) using Tapatalk 2