Hey everyone. I hope this is the right place, but i couldnt find an android head unit thread lol.
So I've been looking at THIS as an option for my 2012 Chevrolet Cruze. I have the stock deck with no extras but AUX. I plan on having this car until it dies so I would love to invest in something like this. The reason I chose this one as its the only one i found running a relatively "newer" version of android and its stock, No launchers or themes. My biggest concern is that CPU. I can't seem to find ANY info on the "Tcc8925 1.2G dual core" cpu. Can anyone give me some insight into its performance etc? RAM seems like it will be more than enough for what I need. My plan is to use Car Home Ultra with everything I need right there, completely customized. I have contacted the seller to make sure its plug and play with my NA Cruze.
If I could root this thing, or unlock the BL and get a good ROM running on it I would be in heaven!
Thanks!
Anyone? Lol
check this out: http://forum.xda-developers.com/showthread.php?t=2087886
Related
So after the past week or so i have done some casual research. Looking thru various sites getting some not so reliable feedback i figured i would just ask at the top.... And i dont know why i didnt in the first place..
I am looking to get a Android Tablet when taxes come. Something not to expensive but not a cheap piece of junk either.
I am looking for something reliable, fast good graphics, a decent camera if possible certianly gps, wifi, bluetooth. I would like to dock it in my car for its Gps potential, and for movies and certianly its music capabilities (like power amp) and pandora last fm ect. I figured i would tether it to my Droid 2, and no i wont be watching movies on it thats more for my wife, friends ect.
I would defenatly want it to have the android market on it, wether i have to put it on there myself or if it was stock. I want to be able to play games like angry bird or whatever. Not just simple low end games but the potentintal to play anything i might want to..
And lastley i would like something that defenatly has some community backbone to it. Something that has been rooted, that people know and i can get reliable support on. I dont want to be running 1.6 on it it has to be like 2.0 or 2.2 and i can upgrade it. Something that runs really smoothly and has at least one decent rom.
I see some of these people who bought cheap tablets off ebay from Hong Kong or whatever and there having to scour the net just to find out what excatly it is called.. I dont really wana do that lol.
If i can find it locally great! If i got to order it off the net then so be it. I just want something that is open, reliale, smooth, fast and has some support behind it...
Sorry if this is the wrong section i looked for a overall tablet form but couldnt find one on XDA and i didnt want to post in every forum. If you have anylinks or even one u are thinking about buying like a link let me know id love to check it out!
Thanks Everyone!
Dude, get a NookColor! $249, supported in ROM Manager, and I'm sure soon to have full ROMs released..
It doesn't have a camera (but your Droid 2 does...) so that might be a deal breaker. It's not a tablet, it's an e-reader, but it's a neat little thing. I can't wait to see the development take off.
Other than that, the Motorola Xoom looks promising, but it's currently unreleased.
-pd
I would recommend the nook Color as well except for the fact that it is lacking a GPS. Therefore it does not fit into the car model. I have one for my son and it is a nice device.
The gps is kind of a nessisity for me, i could give up the camera but im stuck with the gps. But the nook or nook color is out for me. I see it as lacking later on because of its processor and it wasent built to be a tablet. I want something that will ride out for a few years if possible. It needs a 1 ghz prosessor and sufficent ram. And i got to have 2.2+ on it. And 7 inch minumum. Thank you for the suggestion thus far though
Consider the Archos 101 or 70.
Pretty sure it has everything.
There is a forum for it here too.
as far as I know no tablet meets your demands ( 1ghz/2.2/lotso ram/etc) probably best shot at the moment is a flytouch II from lightinthebox ...
10", decent rom support coming together, inbuilt gps, 2 cardslots for storage, android 2.1 with kernel 2.6.32.9 once you upgrade/update it to v1568 firmware.
another OEM provider promised 2.2 was going to be out last weekend but havent seen anything filtering out as of yet
chachi said:
as far as I know no tablet meets your demands ( 1ghz/2.2/lotso ram/etc) probably best shot at the moment is a flytouch II from lightinthebox ...
10", decent rom support coming together, inbuilt gps, 2 cardslots for storage, android 2.1 with kernel 2.6.32.9 once you upgrade/update it to v1568 firmware.
another OEM provider promised 2.2 was going to be out last weekend but havent seen anything filtering out as of yet
Click to expand...
Click to collapse
Actually, Archos already has 2.2 with 1ghz
http://www.archos.com/products/ta/archos_101it/specs.html?country=ca&lang=en
The RAM is not listed on that page but it would be easy to find out.
I'm just stepping out.
And there seems to be a GPS solution here http://forum.archosfans.com/viewtopic.php?f=63&t=37910
Sry... what I meant was I want to run the most uptodate firmware I can so im kosher with 2.1 what im hoping to avoid is where I have seen a lot of them running 1.6. I've been thinking about archos but I just haven't heardb from anyone who ones a archos or a flytouch.. I would defenatly like to hear experiences... thanks again everyone
Sent from my DROID2 using Tapatalk
Also and i forgot to mention it.. It has to have a Capacitive and Multitouch screen like my Droid X or Droid 2.... Does that FlyTouch have that? cause i cant seem to find any information pertaining to that.
no flytouch2 is not multitouch but otherwise i am more than happy with mine, best €130 ish i've ever spent
Ok, so I'm pretty new to this whole Android thing, but I'm not daft and know a think or two about computers and software, so I'm not a complete 'noob'...
However, to spare me the drama of trawling through thousands of pages, I have a few quick concise questions, and would appreciate concise answers.
So I bought a generic handset, branded as an Onyx Dragon though AnTuTu benchmark app tells me its a Yusu... details and specs from Chinavision.com (search Onyx Dragon).
I initially bought it because I needed a new phone (been on a Moto V3 Razr for about 6 years!) so got this cos it was cheap and looked good. Runs Froyo on what I have found to be pretty **** hardware (MT6516, advertised as 416MHz but shown to be around 207MHz, but not sure if this is main CPU or radio core...) with not a lot of RAM. I installed an 8Gb SD card to save the apps and keep as much free internal space as possible, in case the OS supports disc memory (?). The wireless is good and screen works well, but the GPS, navigation and camera are rubbish, but they are not why I bought it; I have a decent camera and I can read a map. Its definitely 'entry level' so I'm not too bothered if I brick it.
Since I got it, and seeing the many cheap 'clones' out there, I'm keen to get into them a bit more and start developing. I already rooted it with z4root, BusyBox and Superuser all installed fine. ROM Manager is running but because I don't know the actual brand I'm not yet running ClockWorkMod (doesn't show up in the list). I'm keen to install Gingerbread or maybe even CyanogenMod 7, but cannot flash the ROM without CWM. Can anyone tell me what phone 'model' I should use for this particular handset?
I can't overclock the chipset, but have been looking at other clones to play with, such as htc Incredible G11i Pro clone from etotalk.com and 'CyberStar' 3G handset with MT6573 650MHz chipset (also from Chinavision).
Does anyone have any knowledge/experience with these clones? They look great and if they work as well as the budget model I have now then there is certainly potential. Sure, they may not be as good as a genuine Galaxy or Nexus, but then the price reflects that. However, as a cheap development platform you can't really go wrong! I'd like to see faster processors and more hardware mod ability such as clocking, just to see what is possible. Anyone tried ICS on one of these? I read elsewhere that if Froyo runs ok on a cheap device then GB should be better. My friend has GB 2.3.3 on a genuine $500 Galaxy S2 and I'd love to show him up with a rooted and clocked clone running ICS for a fraction of the price!!
Well, thats not as concise as I would like, but it covers pretty much everything. One last thing though, I cannot install ES File Explorer 1.6.1, it will download from Market and attempt to install but then fail. The latest version I have is the pre-installed 1.4.2.2. I've tried everything I can think of; downloading on my Mac and copying via USB to install from Astro making sure ES is not running, failed. Tried uninstalling ES with ROM Toolbox having root access and disabled AVG, failed. Tried to launch new version from package options, failed. I have installed ES Task Manager v1.2 but cannot use all the features as it says File Explorer needs to be updated, and needless to say updating it from the prompts failed as well... Any ideas? I'm thinking a flash to GB should include the latest version (or better alternative).
Thanks all in advance!
I don't think it's possible to run ICS on such a low spec'd device. This onyx dragon runs on a 416Mhz ARM9 processor with a 200 Mhz ARM7 GPU. Even the G1 that uses a 528Mhz ARM11 CPU can't run ICS well. I would suggest that you give up on theses crappy chineses devices. If you don't have money you can find a LG Optimus One for 100 bucks on ebay and it is A LOT better than any of these chinese crap phones
Sent from my GT-I9100 using XDA App
For CWM, take a look at this site http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html and the quote below
Don't see your phone? Email me if you want to help me get it working!
And of course, all the source can be found on Github.
Click to expand...
Click to collapse
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hey all, thanks for the feedback. Basically, sure I don't want to spend a lot being a student, I don't have a lot, but I'm keen to get more out of what I can afford, hence the Chinese crap (yes it is crap but if it does what you need...) : ) just a shame I can't clock mine! Does anyone know if ANY MediaTec chips can be?
Sure, I think running ICS is a bit optimistic, but I'd still like to give GB or C-Mod a go, providing I can get CWM installed. I'd like to compile myself and even think about refining my own version, perhaps slimming down a newer version to run on low performance hardware. What's this about a special cable needed with a 3.5mm jack?
And am I right in thinking Honeycomb was only for tablets, not phones...?
droidscope said:
Hey all, thanks for the feedback. Basically, sure I don't want to spend a lot being a student, I don't have a lot, but I'm keen to get more out of what I can afford, hence the Chinese crap (yes it is crap but if it does what you need...) : ) just a shame I can't clock mine! Does anyone know if ANY MediaTec chips can be?
Sure, I think running ICS is a bit optimistic, but I'd still like to give GB or C-Mod a go, providing I can get CWM installed. I'd like to compile myself and even think about refining my own version, perhaps slimming down a newer version to run on low performance hardware. What's this about a special cable needed with a 3.5mm jack?
And am I right in thinking Honeycomb was only for tablets, not phones...?
Click to expand...
Click to collapse
Yes you are right about honeycomb. As for the device. Without kernel source which will never be released due to copyright issues you may have a bit of trouble Modding it. CM only supports authentic devices and not clones as the hardware specs as you learned are faked and never true.
droidscope said:
Hey all, thanks for the feedback. Basically, sure I don't want to spend a lot being a student, I don't have a lot, but I'm keen to get more out of what I can afford, hence the Chinese crap (yes it is crap but if it does what you need...) : ) just a shame I can't clock mine! Does anyone know if ANY MediaTec chips can be?
Sure, I think running ICS is a bit optimistic, but I'd still like to give GB or C-Mod a go, providing I can get CWM installed. I'd like to compile myself and even think about refining my own version, perhaps slimming down a newer version to run on low performance hardware. What's this about a special cable needed with a 3.5mm jack?
And am I right in thinking Honeycomb was only for tablets, not phones...?
Click to expand...
Click to collapse
Hi droidscope,
Not all the Chinese phones are crap there are a few very capable phones now entering the market and they are catching up the bigboys rapidly.
For more info & reviews on the latest Chinese phones check over here http://www.gizchina.com/category/phones/ Try to stick with the branded chinese phones such as Zopo, ZTE, Newman etc because there is at least some support where as the direct copy/clones have no support at all. If buying try to get the phone pre rooted because some of the Chinese phone are getting more difficult to root. I would look here http://www.etotalk.com/ if buying and select the MOD ROM $4.99 for most phones then the phone will come pre rooted with working playstore language etc. They do not 1 to 1 copys although some of the phones have more than a passing look of some of the more famous brands. I have used them a few times and they have not let me down be sure to email them first to ask about stock levels though.
Anyone aware of any 7" Android Car Stereo's out yet? Looking for one that's been rooted and has some development behind it so I can install custom roms. I'm assuming the answer is no. I've seen some of the cheap no name brand units out there, but they'll often either be junk or run an old version of Android with no way of upgrading. Anything decent out there?
Thanks
So, I was at Menards a couple weeks back and saw a generic looking android set top box for around 30$, and so I came here, and find there are a few different kinds of chips that they may use, so... my first question is...
What are the differences between those chips, which is the best, and how can you tell before purchasing, what you are buying, as well as how to buy a good one, as in what to look for, to avoid a bad purchase, and what specs to look for
The next question is, once I buy a generic looking set top box,(the one I saw was labeled abx-12 as a model) how easy is it to find roms for them, and will one rom work on them all
To be fair, I do know about phones, but im out of my depths here, but would like to get into set top boxes, and possibly putting custom roms like resurrection remix (my favorite), on them... i would like this thread to eventually be a guide for every set top newbie, such as myself, and this is the best android modding, and well, anything android, website in my opinion... if these answers can be found elsewhere on this site, condensed into a single thread, please link it, else, if you guys can help me and others like me, I would appreciate it...
I edited it with the right model... i put upx 12, when it was abx 12...
Oh... and id also like to know how much android version matters in set top box discussions as well...
Here's the link to the one I saw at Menards...
https://www.menards.com/main/electr...x-and-wi-fi-router/abx-12/p-1518075021952.htm
i just picked this QFX ABX-12 cheapo ATV box at Menards on Clearance for $20.
Pretty much what i expected, pos china thing.
the rom that is on it is ancient android 7.1 from 2018.
update does not work.
came searching here on XDA to see if maybe someone had easy way to root/re-flash this model box and put a decent ATV rom on it, newer os at least.
but, seems no one cares about these cheap china no name boxes.
Hi, you woukd need to find out what SOC is in your box (amlogic,rockchip ect...) and what model (s905x, s905w ect...) or what bootloade (eg p212, p281 ect...)
The QFX ABX-12 uses the Amlogic S905X, has 1 GB RAM and 8 GB flash. At $25 I might grab one just to mess around with.
I picked up a Transpeed_6k from a Chinese supplier for under €30 to play around with an as a stopgap for my dead Humax box. It runs Android 9.0, has 4GB/64GB memory. CPU-Z tells me that the SOC is Allwinner H6 @ 1.49 GHz, with 4 ARM A53 cores. Bootloader is unknown and no root.
The operation is fast, but the navigation is painful - you have to constantly toggle the mouse mode on and off and you can't scroll the screen. I contacted the supplier because the lack of scrolling prevents Netflix from working. The solution was to install a previous version of the Netflix app. It's still awkward to use. BBC iplayer works with limited scrolling which means you have to use the search function to find TV shows.
I also thought of maybe using it as a Chromecast receiver (like my Mi TV stick does), so I installed Allcast Receiver, but it wouldn't work.
I've also tried using a phone as an external mouse, but that too doesn't let you scroll.
That's it. I haven't managed to find any way of changing the ROM or OS. I suppose not many people are spending time on these boxes.
Hello!
I was wondering if anyone has heard of these devices Gen2i or Gen3 being rooted with a custom android room or linux distro. A lot of these things around not getting repurposed just garbaged, wondering if they are good for anything else.
Thanks!
--CP
sorry to bump an older thread, but I'm very interested in this as well. My employer has at least five or six of the older Gen2i pods that are just collecting dust. Mersive did not want them back when we upgraded to Gen3 pods, and I'd hate to throw them to ewaste. From what I understand they're just running a custom Android ROM. In theory we should be able to flash a stock Android ROM to it and potentially use it as an Android TV box, or something similar. I'd love to learn how to do this and avoid having these totally usable little devices end up in a landfill.
I took one of our Gen2i Pods apart and it appears to be SK hynix branded, but I couldn't find anything on this in a Google search. This is beyond my level of expertise so I'm very much out of my element here. I'd be interested and appreciative in any info anyone is able to provide.
From what I can make out, it states "sk hynix h9cknnndbtmt arnth 515a"
osiris010 said:
sorry to bump an older thread, but I'm very interested in this as well. My employer has at least five or six of the older Gen2i pods that are just collecting dust. Mersive did not want them back when we upgraded to Gen3 pods, and I'd hate to throw them to ewaste. From what I understand they're just running a custom Android ROM. In theory we should be able to flash a stock Android ROM to it and potentially use it as an Android TV box, or something similar. I'd love to learn how to do this and avoid having these totally usable little devices end up in a landfill.
I took one of our Gen2i Pods apart and it appears to be SK hynix branded, but I couldn't find anything on this in a Google search. This is beyond my level of expertise so I'm very much out of my element here. I'd be interested and appreciative in any info anyone is able to provide.
From what I can make out, it states "sk hynix h9cknnndbtmt arnth 515a"
Click to expand...
Click to collapse
CrazyPhil said:
Hello!
I was wondering if anyone has heard of these devices Gen2i or Gen3 being rooted with a custom android room or linux distro. A lot of these things around not getting repurposed just garbaged, wondering if they are good for anything else.
Thanks!
--CP
Click to expand...
Click to collapse
Did any of you have any update on this. I would like to know as well.
Did you see this by any chance?
Flashing a Razer Forge/Solstice Pod with Stock Razer Firmware
How to flash a Razer Forge or Mersive Solstice Pod back to Stock Android TV Have a Forge that needs saving or heard about that crazy story where Razer sold all their overstock Forges to Mersive to make the Solstice Pod, reducing the Forge into a simple screen sharing cast device? Wanna take a...
ouya.world