I have done a lot searching around for wifi problems however I have been unable to find anything quite the same as my issue. I have tried applicable solutions for issues with similar symptoms as mine but none have worked so far. My phone runs primarily off two separate wifi networks, home and work. Security protocol at work is 802.1x EAP while home is just WPA/WPA2 PSK.
When I get to work the phone has no issue connecting to the wifi network automatically. When I get home it will not automatically connect however if I turn wifi off and on again it will connect and stay connected until I go to work again. This issue has persisted across Viper One S, TrickDroid, CM10, and CM10.1 (old and new kernel). The only time it ever automatically connected to my home wifi was when I still has the stock ROM on the phone. I have tried a number of different radios from the temporary installer in the radios thread however I hear that the temp installer is no good for CM10.1 any more since the partition for radios has been changed.
Info that may be useful.
Mods: Rooted, S-OFF, SuperCID, TWRP recovery
HBOOT: 2.15
Radio: 1.11.50.05.28 (CM10.1 now runs off device RADIO partition as I understand it)
Current ROM: CM10.1 20130717 (stock kernel 3.4.10)
Provider: Bell Canada
Relevant logcat info to follow as soon as I walk home for lunch.
This looks like the relevant information to me:
07-17 12:08:08.068 I/wpa_supplicant(744): wlan0: Authentication with [HARDWARE CODE] timed out.
07-17 12:08:10.951 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:10.951 I/wpa_supplicant(744): wlan0: Association request to the driver failed
07-17 12:08:10.951 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
07-17 12:08:10.951 E/wpa_supplicant(744): current_ssid == NULL
07-17 12:08:12.913 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:13.023 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:13.023 E/wpa_supplicant(744): Retrying assoc: 7
07-17 12:08:14.885 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:15.055 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:15.055 E/wpa_supplicant(744): Retrying assoc: 8
07-17 12:08:16.937 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:17.097 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:17.097 E/wpa_supplicant(744): Retrying assoc: 9
07-17 12:08:18.959 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:19.090 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:19.090 E/wpa_supplicant(744): Retrying assoc: 10
07-17 12:08:20.942 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:21.092 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
Some interesting things I noted:
Association request to the driver failed - Does this mean CM10.1 is having a hard time with the WiFi hardware driver?
CTRL-EVENT-ASSOC-REJECT status_code=1 - I did a quick Google for this code but was unable to find anything conclusive.
I do not believe there is an issue with my router because I am able to connect to the WiFi with my MBP without any issues. I have also tried enabling and disabling 5Ghz.
New error being thrown while the phone is unable to connect to my work wifi:
setKernelCountSet(10088, 1) failed with errno -13
Googled errno -13 but was unable to find anything. The issue connecting to my work wifi is relatively new and I assume it started with one of the nightlies since that is the only thing that would have changed.
Related
I have a very strange problem. My WiFi can't find any networks when scanning.
The driver is loading and there are no errors.
dmesg output:
Code:
<6>[ 301.071329] TIWLAN: Driver loading
<4>[ 301.071757] trout_wifi_power: 1
<4>[ 301.317952] trout_wifi_reset: 0
<4>[ 301.368348] trout_wifi_set_carddetect: 1
<7>[ 301.368654] mmc0: card_present 1
<6>[ 301.368928] mmc0: Slot status change detected (0 -> 1)
<4>[ 301.380475] mmc0: card claims to support voltages below the defined range. These will be ignored.
<4>[ 301.380475] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
<6>[ 301.380475] mmc0: new SDIO card at address 0001
<6>[ 301.380475] TIWLAN: Found SDIO controller (vendor 0x104c, device 0x9066)
<6>[ 301.384045] TIWLAN: Driver initialized (rc 0)
<6>[ 301.384442] TIWLAN: Driver loaded
log output when starting WiFi and scanning for network:
Code:
D/SettingsWifiEnabler( 229): Received wifi state changed from Disabled to Enabling
D/wlan_loader( 313): adapter tiwlan0, eeprom /proc/calibration, init /system/etc/wifi/tiwlan.ini, firmware /system/etc/wifi/Fw1251r1c.bin
D/wlan_loader( 313): Configuring adapter
D/wlan_loader( 313): Adapter configuration rc = 0
D/wlan_loader( 313): Starting configMge
D/wlan_loader( 313): ConfigMge start rc = 0
D/wlan_loader( 313): Driver configured
D/wlan_loader( 313): Firmware loaded and running OK
D/wlan_loader( 313): Set property wlan.driver.status = ok - Ok
I/BluetoothHeadset( 54): Proxy object is now connected to Bluetooth Headset Service
V/WifiStateTracker( 54): Connection to supplicant established, state=INACTIVE
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=1]
V/WifiStateTracker( 54): Changing supplicant state: INACTIVE ==> INACTIVE
D/SettingsWifiEnabler( 229): Received wifi state changed from Enabling to Enabled
I/dalvikvm( 54): threadid=15: bogus mon 1+0>0; adjusting
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 54): Changing supplicant state: INACTIVE ==> SCANNING
D/SettingsWifiEnabler( 229): Received wifi state changed from Enabling to Enabled
V/WifiMonitor( 54): Event [CTRL-EVENT-SCAN-RESULTS Ready]
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=1]
V/WifiStateTracker( 54): Changing supplicant state: SCANNING ==> INACTIVE
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 54): Changing supplicant state: INACTIVE ==> SCANNING
V/WifiMonitor( 54): Event [CTRL-EVENT-SCAN-RESULTS Ready]
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=1]
V/WifiStateTracker( 54): Changing supplicant state: SCANNING ==> INACTIVE
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 54): Changing supplicant state: INACTIVE ==> SCANNING
V/WifiMonitor( 54): Event [CTRL-EVENT-SCAN-RESULTS Ready]
V/WifiMonitor( 54): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=1]
V/WifiStateTracker( 54): Changing supplicant state: SCANNING ==> INACTIVE
and so on.. INACTIVE ==> SCANNING and SCANNING ==> INACTIVE is repeating forever.
But no scan results. I tried it with 3 different routers.
It was working a week ago, but suddenly stopped. I did reflash to RC29, then RC30. I am with ADP1 now.
Can I do something to get it working? Is it a hardware problem?
Thanks a lot!
Does anyone know what causes this?
Newbie16 said:
Does anyone know what causes this?
Click to expand...
Click to collapse
So you're running the straight ADP build from HTC's website?
Oh nevermind, I see the original post was back whiles ago.
The only time I've seen this occur is when some things get messed up on the build.prop. Specifically these (2) settings ...
wifi.interface=tiwlan0
wifi.supplicant_scan_interval=45
If the symptoms are the same under different builds, it def sounds like a hardware problem to me (if you wiped that is, which it sounds like you did since you said you flashed RC29).
I assume you've tried different environments w/ different AP's etc...right?
edit: owned by the thread resurrection, ha
Hello.
I have a problem with CM10 (cm-10-20120923-EXPERIMENTAL-saga-NK111) wifi. I can turn wifi on off and see all the AP's I would regularly see but I cannot connect to any of them (just says Saved, secured with WPA2).
Right now I tried CM9 (NK111 latest build) and there it worked perfectly.
Baseband is 20.76.30.0835U_3831.19.00.110
Logcat is here:
Code:
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: Authentication with 30:85:a9:39:42:e0 timed out.
I/wpa_supplicant( 1674): wlan0: Trying to associate with 30:85:a9:39:42:e0 (SSID='Ssid' freq=2462 MHz)
I/wpa_supplicant( 1674): wlan0: CTRL-EVENT-DRIVER-STATE STOPPED
E/wpa_supplicant( 1674): android_wext_cmd failed (-1): PNOFORCE 0
D/WifiStateMachine( 1447): Received INTERFACE_DISABLED message
E/WifiStateMachine( 1447): Error! unhandled message 0x20099 - 153
I/wpa_supplicant( 1674): wlan0: Authentication with 00:00:00:00:00:00 timed out.
Can someone help me with this problem. What should I do? Before going to CM10 I used Stock ICS RUU
I'm on 0923 also but using Radio-20.4801.30.0822U_3822.10.08.04.
I have no problems with Wi-Fi.
Sent from my HTC Saga
BillGoss said:
I'm on 0923 also but using Radio-20.4801.30.0822U_3822.10.08.04.
I have no problems with Wi-Fi.
Sent from my HTC Saga
Click to expand...
Click to collapse
Thank you for replying!
Ok I was afraid it is a radio issue (it is the newest radio fw) or some incompatibility with CM10. Can you please forward this message to Development forum? I cannot post there yet. I would really appreciate it!
there's a wifi issue on my device when i flash the cm9(9.0-9.1stable or RC or newest nigthly) or cm10 .:crying:
when turn on the wifi ,always show "turning wi-fi on..." .or auto turn off turn on in loop... can't search or add.
but there isn't problem in ruu rom or miui that they both use the android 4.03.
my device is:
htc sensation xe.
cid HTC__622(writed 1111111).
flashed the newlest euorpe 3.33 firmware with the ruu.
1.29 hboot.
unlock.
ship s-off.
before flash new rom i had wipe all cache.
pelase help me...
Well which kernel dud you flash on top?
Sent from my Sensation using Tapatalk 2
blahbl4hblah said:
Well which kernel dud you flash on top?
Sent from my Sensation using Tapatalk 2
Click to expand...
Click to collapse
i hadn't changed the kernel, all are the rom or ruu default
i tried a lot of kernel, and had the same problem on ICS, but it's working on CM10 (bruce's nightly)
mrc90 said:
i tried a lot of kernel, and had the same problem on ICS, but it's working on CM10 (bruce's nightly)
Click to expand...
Click to collapse
please tell me~~~which kernel can work in cm10?
this is logcat:
D/libloc ( 241): loc_eng_ioctl result: client = 0, ioctl_type = RPC_LOC_IOCTL_
INJECT_PREDICTED_ORBITS_DATA, RPC_LOC_API_SUCCESS
D/libloc ( 241): loc_eng_deferred_action_thread. waiting for events
D/RPC ( 241): 3100008c:327681 sending RPC reply (XID 16)
D/ThermalDaemon( 756): CPU[0] frequency limited to 1512000
D/ThermalDaemon( 756): Sensor 'tsens_tz_sensor0' - temperature 53248, threshold
level 0
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 120): Softap fwReload - Ok
D/CommandListener( 120): Setting iface cfg
D/NetworkManagementService( 241): rsp <213 00:90:4c:11:22:33 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
I/BATT_ALG( 130): batt_alg_overtemp_check:temp:377, isOver_temp:0
I/BATT_ALG( 130): vol=3960;curr=63;dis_curr=0;temp=377;id=2;level=82;chg_src=1;
chg_en=1;ov_chg=0;isOver_temp=0;timer=60;safety_count=120
D/dalvikvm( 595): GC_CONCURRENT freed 1556K, 79% free 2616K/12288K, paused 1ms+
2ms
W/BackupManagerService( 241): dataChanged but no participant pkg='com.android.p
roviders.settings' uid=1001
D/dalvikvm( 595): GC_CONCURRENT freed 1635K, 79% free 2700K/12288K, paused 2ms+
3ms
E/wpa_supplicant( 1352): Could not set interface wlan0 flags: Operation not perm
itted
E/wpa_supplicant( 1352): nl80211: Could not set interface 'wlan0' UP
E/wpa_supplicant( 1352): wlan0: Failed to initialize driver interface
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/dalvikvm( 595): GC_CONCURRENT freed 1682K, 78% free 2733K/12288K, paused 2ms+
2ms
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiStateMachine( 241): Failed to setup control channel, restart supplicant
D/SoftapController( 120): Softap fwReload - Ok
D/NetworkManagementService( 241): rsp <213 a8:26:d9:16:7b:9e 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/CommandListener( 120): Setting iface cfg
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
E/WifiHW ( 241): Unable to open connection to supplicant on "wlan0": No such f
ile or directory
D/dalvikvm( 241): GC_CONCURRENT freed 1691K, 60% free 4994K/12288K, paused 2ms+
4ms
D/dalvikvm( 595): GC_CONCURRENT freed 1636K, 78% free 2812K/12288K, paused 1ms+
3ms
E/WifiConfigStore( 241): Error parsing configurationjava.io.FileNotFoundExcepti
on: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory
)
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): Failed to set country code cn
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
I/wpa_supplicant( 1508): wlan0: CTRL-EVENT-DRIVER-STATE HANGED
E/WifiStateMachine( 241): Failed to set frequency band 0
D/CommandListener( 120): Clearing all IP addresses on wlan0
D/ConnectivityService( 241): ConnectivityChange for WIFI: DISCONNECTED/DISCONNE
CTED
D/ConnectivityService( 241): Attempting to switch to mobile
D/ConnectivityService( 241): Attempting to switch to BLUETOOTH_TETHER
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
W/NetworkStats( 241): dropping UID delta from unknown iface: iface=wlan0 uid=0
set=DEFAULT tag=0x0 rxBytes=0 rxPackets=0 txBytes=140 txPackets=2 operations=0
D/ConnectivityService( 241): ConnectivityChange for WIFI: DISCONNECTED/DISCONNE
CTED
D/ConnectivityService( 241): Attempting to switch to mobile
D/ConnectivityService( 241): Attempting to switch to BLUETOOTH_TETHER
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:4.900000 seq:195
D/ThermalDaemon( 756): CPU[1] frequency limited to 1512000
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
I/wpa_supplicant( 1508): wlan0: CTRL-EVENT-TERMINATING
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.000000 seq:297 (Up time:350)
W/Netd ( 120): No subsystem found in netlink event
D/NetlinkEvent( 120): Unexpected netlink message. type=0x11
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:3.200000 seq:199
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 120): Softap fwReload - Ok
D/CommandListener( 120): Setting iface cfg
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
E/WifiHW ( 241): Unable to open connection to supplicant on "wlan0": No such f
ile or directory
D/NetworkManagementService( 241): rsp <213 00:90:4c:11:22:33 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.700000 seq:327 (Up time:495)
D/Tethering( 241): MasterInitialState.processMessage what=3
D/Tethering( 241): MasterInitialState.processMessage what=3
D/Tethering( 241): MasterInitialState.processMessage what=3
D/Tethering( 241): MasterInitialState.processMessage what=3
D/CMStats ( 523): Prompting user for opt-in.
D/CMStats ( 523): Prompting user for opt-in.
D/CMStats ( 523): Prompting user for opt-in.
D/CMStats ( 523): Prompting user for opt-in.
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:4.700000 seq:198
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.000000 seq:274 (Up time:274)
D/dalvikvm( 595): GC_CONCURRENT freed 1611K, 77% free 2916K/12288K, paused 1ms+
3ms
V/MediaScanner( 595): pruneDeadThumbnailFiles... android.database.sqlite.SQLite
[email protected]
V/MediaScanner( 595): /pruneDeadThumbnailFiles... android.database.sqlite.SQLit
[email protected]
I/power ( 241): *** set_screen_state 0
D/Sensors ( 241): handle : 4 en: 0, v010.0 - Try to resolve lock issue
D/Sensors ( 241): lock_status = 4
D/Sensors ( 241): Andy: MPLSensor::enable: lock1
W/MPL-sup ( 241): MLGetAKMComassStatus, gAKMCompassStatus = 0
D/Sensors ( 241): mEnabled = 0x0
D/Sensors ( 241): set_power_states++: enabled_sensors: 0 dmp_started: 1
D/Sensors ( 241): Before if statment: cs:0 rs:0 en_ped:0 da_ped:0 en_g:0 da_g:0
D/Sensors ( 241): Stopping DMP
I/ ( 241): mpu3050_suspend: suspending sensors to 0000
I/ ( 241): mpu3050_suspend: Will resume next to 0070
D/Sensors ( 241): inside if(s_use_timerirq)
D/Sensors ( 241): set_power_states--
D/Sensors ( 241): Andy: MPLSensor::enable: unlock1
D/Sensors ( 241): calling MLStoreCalibration()
D/Sensors ( 241): MPLSensor::enable--1
D/SurfaceFlinger( 123): About to give-up screen, flinger = 0xd81918
E/msm8660.gralloc( 123): In fb_enableHDMIOutput: externaltype = 0
I/SamplingRateChangeProcessor( 241): Increased sampling rate.
V/AudioHardwareMSM8660( 126): setParameters() screen_state=off
D/OpenGLRenderer( 435): Flushing caches (mode 0)
D/AccelerometerListener( 498): enable(false)
I/BATT_ALG( 130): batt_alg_overtemp_check:temp:377, isOver_temp:0
I/BATT_ALG( 130): vol=4017;curr=317;dis_curr=0;temp=377;id=2;level=82;chg_src=1
;chg_en=1;ov_chg=0;isOver_temp=0;timer=60;safety_count=180
I/power ( 241): *** set_screen_state 1
D/Sensors ( 241): handle : 4 en: 1, v010.0 - Try to resolve lock issue
D/Sensors ( 241): lock_status = 2
D/Sensors ( 241): Andy: MPLSensor::enable: lock1
D/Sensors ( 241): mEnabled = 0x10
D/Sensors ( 241): set_power_states++: enabled_sensors: 16 dmp_started: 0
D/Sensors ( 241): Before if statment: cs:0 rs:1 en_ped:0 da_ped:0 en_g:0 da_g:0
D/Sensors ( 241): STOP timerirq_1
I/WindowManager( 241): No lock screen!
D/Sensors ( 241): Starting DMP
I/ ( 241): mpu3050_resume: Resuming to 0070
D/Sensors ( 241): Exit: Starting DMP
D/Sensors ( 241): set_power_states--
D/Sensors ( 241): Andy: MPLSensor::enable: unlock1
D/Sensors ( 241): MPLSensor::enable--1
D/Sensors ( 241): (llu)G_Delay = 200
I/ ( 241): mpu3050_resume: Resuming to 0070
I/ ( 241): mpu3050_suspend: suspending sensors to 0070
I/ ( 241): mpu3050_suspend: Will resume next to 0070
I/MPL-ml ( 241): Actual ODR: 25 Hz
D/Sensors ( 241): (llu)G_Delay = 66
I/ ( 241): mpu3050_resume: Resuming to 0070
I/ ( 241): mpu3050_suspend: suspending sensors to 0070
I/ ( 241): mpu3050_suspend: Will resume next to 0070
I/MPL-ml ( 241): Actual ODR: 25 Hz
I/SamplingRateChangeProcessor( 241): Decreased sampling rate.
D/SurfaceFlinger( 123): Screen about to return, flinger = 0xd81918
E/msm8660.gralloc( 123): In fb_enableHDMIOutput: externaltype = 0
V/AudioHardwareMSM8660( 126): setParameters() screen_state=on
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:4.400000 seq:197
D/AccelerometerListener( 498): enable(false)
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.000000 seq:327 (Up time:441)
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
E/wpa_supplicant( 1526): Could not set interface wlan0 flags: Operation not perm
itted
E/wpa_supplicant( 1526): nl80211: Could not set interface 'wlan0' UP
E/wpa_supplicant( 1526): wlan0: Failed to initialize driver interface
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiStateMachine( 241): Failed to setup control channel, restart supplicant
D/SoftapController( 120): Softap fwReload - Ok
D/NetworkManagementService( 241): rsp <213 a8:26:d9:16:7b:9e 0.0.0.0 0 [down br
oadcast multicast]>
D/CommandListener( 120): Setting iface cfg
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
E/WifiConfigStore( 241): Error parsing configurationjava.io.FileNotFoundExcepti
on: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory
)
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): set suspend optimizations failed!
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): Failed to set country code cn
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): Failed to set frequency band 0
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
W/wpa_supplicant( 1677): wlan0: Failed to initiate AP scan
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
I/wpa_supplicant( 1677): wlan0: CTRL-EVENT-DRIVER-STATE HANGED
W/wpa_supplicant( 1677): wlan0: Failed to initiate AP scan
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
D/CommandListener( 120): Clearing all IP addresses on wlan0
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
W/NetworkStats( 241): dropping UID delta from unknown iface: iface=wlan0 uid=0
set=DEFAULT tag=0x0 rxBytes=0 rxPackets=0 txBytes=384 txPackets=6 operations=0
I/wpa_supplicant( 1677): wlan0: CTRL-EVENT-TERMINATING
W/Netd ( 120): No subsystem found in netlink event
D/NetlinkEvent( 120): Unexpected netlink message. type=0x11
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 120): Softap fwReload - Ok
D/CommandListener( 120): Setting iface cfg
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
D/NetworkManagementService( 241): rsp <213 00:90:4c:11:22:33 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
Hi all,
I recently purchased a SGS3 and ran the stock ROM for approx 30mins before flashing a CM10 nightly build (i9300 intl). Because of this I am unable to verify if the wifi was working on my home router prior to flashing a custom ROM.
At work I am able to connect to our wifi connection without problemson 2.4ghz or 5ghz. At home I've got a D-Link DSL-G604T wireless router which I am unable to connect to. I've tried changing the wifi channel, password, removing protection, factory reset and installed a seperate CM10 nightly build without any help.
When trying to connect to the WIFI connection I get the following output in adb logcat.
Anyone have any ideas what may be stopping me from connecting ot my wifi?
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
I/wpa_supplicant( 5841): wlan0: Trying to associate with 00:1e:58:80:a2:e2 (SSID
='HOMEWIFI' freq=2452 MHz)
D/CommandListener( 1913): Clearing all IP addresses on wlan0
I/wpa_supplicant( 5841): wlan0: Associated with 00:1e:58:80:a2:e2
I/wpa_supplicant( 5841): wlan0: Authentication with 00:1e:58:80:a2:e2 timed out.
I/wpa_supplicant( 5841): wlan0: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00
reason=0
More info of my phone (kernel, build etc): i.imgur.com/PRaEx.png
Cheers
You checked "Yes this is a question"
Guess where it belongs?
Moved to Q&A
Friendly Neighborhood Moderator
I am having an issue where my WiFi keeps disconnecting. Its only on my home router that I've noticed. Its a fritzbox. I have reinstalled the ROM. Plus wiped everything. No restore with titainium this time just in case. (I only restore user apps anyway.) This has been happening on the last two builds. Which strikes me as odd because I have been running Scotts cm10 with out issue from almost the beginning. And switched to beanstalk on day one. Its just been the last two builds of beanstalk giving me a hard time. Let me know your ideas. I've searched through the menus, but with all these added features I could have missed something.
Sent from my SGH-I997 using xda app-developers app
Same here...
Having the same basic issue, though it's more of a minor annoyance than anything else. Get kicked off wifi. Turn wifi off and then back on. Then reconnect and usually it works.
And I should say that this is just a minor, minor glitch in what is otherwise an awesome ROM. Thanks for all your work on it, Scott!
Any thoughts on wifi fixes?
I am happy with CM10 11/15 release. Everything is working and I recommend others to go to that release.
New releases, codename, etc. is just a toy for developers to experiment. There will always be something not working or working incorrectly.
I have been fed by "ultra smooth", "buttery smooth", etc. BS, basically no changes from earlier CM10. It is smooth until you have some app taking more cpu or available memory is close to 0. Then all smoothness disappears.
Just find a version which works for you and stop making troubles to yourself with newer and newer versions.
0.02c
Newest working for me fine
Sent from my SGH-I997 using Tapatalk 2
Scott's Beanstalk build does the same thing to me (haven't tried the 2/3 release), it seems to only happen when I turn WiFi sleep on. If I leave it set to never sleep, it doesn't disconnect.
I've been having this issue too, I think it has been happening for me since switching to any ICS or JB rom but it seems worse lately. I've been tempted to switch back to the latest official GB release to see if I still have the issue but haven't tried that yet
I've checked the wifi sleep settings and tried all possible options. If seems to go to sleep and never wakeup. If I am hooked to power it doesn't seem to happen or if there is something active it doesn't happen.
In the logcat it happens about here:
I/EventLogService( 1047): Aggregate from 1358904794591 (log), 1358904794591 (data)
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/ThrottleService( 443): unable to find stats for iface pdp0
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
I/wpa_supplicant(19752): wlan0: CTRL-EVENT-DISCONNECTED bssid=c0:c1:c0:dc:f5:cc reason=1
E/wpa_supplicant(19752): wpa_driver_nl80211_driver_cmd: failed to issue private commands
D/CommandListener( 142): Clearing all IP addresses on wlan0
D/ConnectivityService( 443): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 443): Attempting to switch to mobile
D/ConnectivityService( 443): Attempting to switch to BLUETOOTH_TETHER
D/NetUtils( 443): android_net_utils_resetConnections in env=0x2a292630 clazz=0xef500001 iface=wlan0 mask=0x3
D/ConnectivityService( 443): resetConnections(wlan0, 3)
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
D/NetUtils( 443): android_net_utils_resetConnections in env=0x2a292630 clazz=0xf1b00001 iface=wlan0 mask=0x3
D/ConnectivityService( 443): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 443): Attempting to switch to mobile
D/ConnectivityService( 443): Attempting to switch to BLUETOOTH_TETHER
D/ConnectivityService( 443): resetConnections(wlan0, 3)
D/dalvikvm( 806): GC_CONCURRENT freed 625K, 22% free 4256K/5408K, paused 7ms+2ms, total 129ms
D/dalvikvm( 443): GC_CONCURRENT freed 1861K, 40% free 16643K/27640K, paused 10ms+9ms, total 102ms
D/dalvikvm( 443): WAIT_FOR_CONCURRENT_GC blocked 52ms
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
W/wpa_supplicant(19752): wlan0: Failed to initiate AP scan
The "Failed to initiate AP scan" repeats until wifi is disabled and restarted.
Only issue I have with the latest 2/3 build is that when I connect BT to car for talk... the sound comes across like I'm listening to a Walkie Talkie from the person I'm talking to.
They here me fine though. Also. The BT to Streaming music sounds good.
I ended up just wiping and restoring the PREVIOUS build which was working perfect.
I'm at a loss on this one. I reverted to stock and then tried Aeon for a while and had the same issue, although Aeon would sometimes bring the Wifi back on its own without me having to disable wifi and re-enable it. With Aeon I had a problem with the screen not coming back on after a deep sleep that I had with some other GB releases so I decided to go back up to Bean Stalk.
Did a complete format, wipe, and install and I'm having the same wifi issue. It acts like "Keep Wi-Fi on during sleep" is set to "Only when plugged in" even though I have it set to Always. When it wakes back up the only way to bring wifi back is to disable/enable it. I'm tempted to start timing how long it takes
Some more logcat info:
I/PowerManagerService( 428): Going to sleep due to screen timeout...
I/wpa_supplicant( 595): wlan0: CTRL-EVENT-DISCONNECTED bssid=c0:c1:c0:dc:f5:cc reason=1
E/wpa_supplicant( 595): wpa_driver_nl80211_driver_cmd: failed to issue private commands
D/CommandListener( 142): Clearing all IP addresses on wlan0
D/ConnectivityService( 428): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 428): Attempting to switch to mobile
D/ConnectivityService( 428): Attempting to switch to BLUETOOTH_TETHER
D/NetUtils( 428): android_net_utils_resetConnections in env=0x2a170ed0 clazz=0x6ac00001 iface=wlan0 mask=0x3
D/ConnectivityService( 428): resetConnections(wlan0, 3)
W/wpa_supplicant( 595): wlan0: Failed to initiate AP scan
D/dalvikvm( 587): GC_CONCURRENT freed 503K, 24% free 3101K/4080K, paused 7ms+53ms, total 152ms
D/SurfaceFlinger( 145): Screen released, type=0 flinger=0x2a007318
E/wpa_supplicant( 595): wpa_driver_nl80211_driver_cmd: failed to issue private commands
V/TransportControlView( 428): Create TCV com.android.internal.policy.impl.keyguard.KeyguardTransportControlView{41677960 V.E..... ......I. 0,0-0,0 #102030a android:id/keyguard_transport_control}
D/dalvikvm( 428): JIT code cache reset in 4 ms (1048448 bytes 1/0)
D/dalvikvm( 428): GC_CONCURRENT freed 1669K, 37% free 9285K/14728K, paused 3ms+9ms, total 103ms
V/KeyguardViewManager( 428): State lockbackground:null
W/wpa_supplicant( 595): wlan0: Failed to initiate AP scan
D/dalvikvm( 428): GC_FOR_ALLOC freed 664K, 37% free 9354K/14728K, paused 59ms, total 61ms
W/wpa_supplicant( 595): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 595): wlan0: Failed to initiate AP scan
D/Tethering( 428): MasterInitialState.processMessage what=3
D/ConnectivityService( 428): handleInetConditionChange: no active default network - ignore
D/PicasaUploaderSyncManager( 1602): active network: null
I fixed mine by shutting off WiFi optimization in the WiFi advanced settings. All is back to normal now.
Sent from my SGH-I997 using xda app-developers app
I might have figured out my problem, hopefully I'm not jinxing myself by posting this.
I installed Wifi Fixer and that didn't really help, but it would make the network reconnect after it dropped. What really helped was turning on the logging and seeing what was happening.
I have a Linksys router that is 802.11A/N and 802.11B/G compatible. Well I had the same ssid for for sets of bands so I think there is either weird power saving on the A/N or something weird where it would switch back and forth and get into some weird state. I changed the ssid on my A/N to something different and it hasn't dropped in a while now
After I'm sure it is fixed I might add the A/N ssid to my phone to see if that works.
Hopefully this helps someone else out there.
Well I still had issues with Beanstalk (the latest 4.2.1 version). Last night I flashed back to stock GB and I'm going to see if the wifi problem persists for me.
I'd really like to be on a ICS/JB rom but with the wifi constantly freaking out and the crazy battery life I might end up sticking with GB.
What is the best GB for Infuse?
I am done playing QA. 8 months testing and I can't stay with : GPS is not turning up if not used for some time ( Maps or other GPS can't turn it on. Have to reboot ), 720p not working, 480p produces video which gallery sometimes have problems creating/viewing thumbnails (really slow response from phone and eating battery; if this happens screen stays black for minutes until it starts re-drawing), WiFi issues (I stopped using WiFi tethering, which was the main reason to try 4+), very frequent DEBUG logs (OS Monitor) eat CPU for no reason, bluetooth issues only on my phone.