Database Info

Froyo O3D suddenly won't connect to wifi modem

Last night my Froyo O3D (waiting for gb update) disconnected from my wireless router and every time I click the wifi tab to connect it connects then says authentication error (sometimes says nothing) then disconnects despite not having installed any new apps recently.
The error log when I try to connect wirelessly reads as follows (edited the SSID number for posting)
Code:
Changing supplicant state: INACTIVE ==> SCANNING
STATE_CHANGED for: featureId: -1, typeName: WIFI; stateDISCONNECTED/SCANNING
Dropping ConnectivityChange for WIFI: DISCONNECTED/SCANNING
Trying to associate with 00:25:69:53:a7:9d (SSID='SKY42908' freq=2412 MHz)
CCKM: WPA: set AP WPA IE
CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:25:69:53:a7:9d
setDetailed state, old =SCANNING and new state=CONNECTING
Event [Trying to associate with 00:25:69:53:a7:9d (SSID='SKY****' freq=2412 MHz)]
Event [CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:25:69:53:a7:9d]
get scan results
Changing supplicant state: SCANNING ==> ASSOCIATING
STATE_CHANGED for: featureId: -1, typeName: WIFI; stateCONNECTING/CONNECTING
ConnectivityChange for WIFI: CONNECTING/CONNECTING
CTRL-EVENT-STATE-CHANGE id=2 state=4 BSSID=00:25:69:53:a7:9d
setDetailed state, old =CONNECTING and new state=CONNECTING
Associated with 00:25:69:53:a7:9d
CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00
setDetailed state, old =CONNECTING and new state=AUTHENTICATING
Event [CTRL-EVENT-STATE-CHANGE id=2 state=4 BSSID=00:25:69:53:a7:9d]
Changing supplicant state: ASSOCIATING ==> ASSOCIATED
Event [Associated with 00:25:69:53:a7:9d]
Event [CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00]
Changing supplicant state: ASSOCIATED ==> FOUR_WAY_HANDSHAKE
STATE_CHANGED for: featureId: -1, typeName: WIFI; stateCONNECTING/AUTHENTICATING
Dropping ConnectivityChange for WIFI: CONNECTING/AUTHENTICATING
[GsmDataConnectionTracker] rx 2978, tx 3090
Fast dormancy check PDP num =1
2g screen on) Set Timer to 1000
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
[RosterMgr] roster not modified
2army log acquireWakeLock flags=0x1 tag=RILJuid=1001
setIndicatorValue: 6,3
JBtlAg context is disabled
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
2army log acquireWakeLock flags=0x1 tag=GTALK_CONNuid=10022
[OtrMgr] OTR not modified
[GsmDataConnectionTracker] rx 2981, tx 3092
Fast dormancy check PDP num =1
2g screen on) Set Timer to 1000
CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00
Event [CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00]
Changing supplicant state: FOUR_WAY_HANDSHAKE ==> FOUR_WAY_HANDSHAKE
2army log acquireWakeLock flags=0x1 tag=RILJuid=1001
setIndicatorValue: 6,4
JBtlAg context is disabled
[GsmDataConnectionTracker] rx 2981, tx 3092
isRilReset data = false
[GsmDataConnectionTracker] notifyDataActivity(NONE)
Fast dormancy check PDP num =1
2g screen on) Set Timer to 1000
updateDataIcon : Srv=true DataSrv=true DataSt=2 RAT=2
CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00
Event [CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00]
Changing supplicant state: FOUR_WAY_HANDSHAKE ==> FOUR_WAY_HANDSHAKE
2army log acquireWakeLock flags=0x1 tag=RILJuid=1001
updateSignalState : Don't send RSSI-timeSinceRequest: 998
setTimeoutLocked mPolicy.isKeyguardShowingAndNotHidden = false
[GsmDataConnectionTracker] rx 2981, tx 3092
Fast dormancy check PDP num =1
2g screen on) Set Timer to 1000
CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00
Event [CTRL-EVENT-STATE-CHANGE id=2 state=5 BSSID=00:00:00:00:00:00]
Changing supplicant state: FOUR_WAY_HANDSHAKE ==> FOUR_WAY_HANDSHAKE
Everything else works wirelessly just not my Android phone, any ideas why?
Dave

[Q] Wireless-N not work

Have faced a problem that my HTC One S don't connect to wi-fi N access point. It stucks at authentication. If I disable N-mode at AP - the phone connects normally. Does anybody have such problem? In both cases WPA2 is used.

bump.... so no one have such problems? or no one is using wifi-n?

have you try the advanced option of wi-fi?
option ---> wi-fi ----> advanced ----> better wi-fi performance?

igooor87 said:
have you try the advanced option of wi-fi?
option ---> wi-fi ----> advanced ----> better wi-fi performance?
Click to expand...
Click to collapse
Yes, I have tried but no luck. Here is logcat:
I/wpa_supplicant( 4356): wlan0: Trying to associate with yy:yy:yy:yy:yy:yy (SSID='MY-WLAN' freq=2472 MHz)
I/wpa_supplicant( 4356): Cancelling scan request -
I/wpa_supplicant( 4356): wpa_supplicant_set_state -
I/wpa_supplicant( 4356): WEXT: Custom wireless event: 'BEACONIEs='
I/wpa_supplicant( 4356): wpa_supplicant_set_state -
I/wpa_supplicant( 4356): wlan0: Associated with yy:yy:yy:yy:yy:yy
I/wpa_supplicant( 4356): Cancelling scan request -
I/wpa_supplicant( 4356): wpa_supplicant_set_state -
I/wpa_supplicant( 4356): [SeamLess] We are roaming state is drv->flag_roam_state is 0drv->flag_roaming is 0
I/wpa_supplicant( 4356): [SeamLess] We are roaming state is drv->flag_roam_state is 0drv->flag_disconnect_state is 0
I/wpa_supplicant( 4356): [SeamLess] Flag roam state is mlme_event_disconnect:1514
I/wpa_supplicant( 4356): [SeamLess] We are in roaming_scan_handler to register to timeout handlers
I/wpa_supplicant( 4356): [SeamLess] We requested scan to connect
I/wpa_supplicant( 4356): Setting scan request: 0 sec 0 usec
I/wpa_supplicant( 4356): wpa_supplicant_trigger_scan +
W/wpa_supplicant( 4356): [EAP-MSG] EAP [email protected]: eap_methods not available
I/wpa_supplicant( 4356): [SeamLess] This is already connected so rejected to yy:yy:yy:yy:yy:yy
I/wpa_supplicant( 4356): [SeamLess] flag_disconnect is set i.e., Seamless is give it up
I/wpa_supplicant( 4356): [SeamLess] Event DISASSOC is Generated seamless_roaming_disconnect:438
I/wpa_supplicant( 4356): wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
I/wpa_supplicant( 4356): WPA: Auto connect enabled: try to reconnect (wps=0)
I/wpa_supplicant( 4356): Setting scan request: 0 sec 500000 usec
I/wpa_supplicant( 4356): Setting scan request: 0 sec 100000 usec
I/wpa_supplicant( 4356): wlan0: CTRL-EVENT-DISCONNECTED bssid=yy:yy:yy:yy:yy:yy reason=0
I/wpa_supplicant( 4356): wpa_supplicant_set_state -
BUT, the passphase is correct. If I just turn off N-mode in access point it connects normally.

Does your router have the option for WPA+WPA2 not just one or the other? If so try enabling the setting to use both.
Sent from my HTC One S using xda premium

doktortaru said:
Does your router have the option for WPA+WPA2 not just one or the other? If so try enabling the setting to use both.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Currently I configure it to use only WPA2 (CCMP/AES cipher) but also tryed with WPA (TKIP cipher) and already tryed to use both WPA+WPA2 - no luck.
P.S.
I'm also have HTC Incredible S and it connects to AP normally in all possible modes while One S won't.

WLAN
Working fine on my Phone.. Problems with your Rom?

Andy2502 said:
Working fine on my Phone.. Problems with your Rom?
Click to expand...
Click to collapse
Have checked with 3 different roms including official. What AP do you have and which speed it suppors (150/300mbps)?

i had a similar issue but my phone would reboot after failed attempts to connect.
what is your baseband? i was on 0.15 and the phone finally connected when i used the TMOUS RUU to update to 0.16.

suhailtheboss said:
i had a similar issue but my phone would reboot after failed attempts to connect.
what is your baseband? i was on 0.15 and the phone finally connected when i used the TMOUS RUU to update to 0.16.
Click to expand...
Click to collapse
radio is 0.16.31501S.17_2_10.23.31501S.10L and the rom is 1.78.401.2, previously was on official T-Mobile DE rom, but currently on LeeDroid. With both roms wifi won't auth with AP in N-mode

Solved by compiling latest compat-wireless for AP.

darkside_ua said:
Solved by compiling latest compat-wireless for AP.
Click to expand...
Click to collapse
Hi, i have the same issue with the original ROM 1.78.401.2.
Could you please explain me how to solve this? My HTC is already rooted...
Thanks

[Q] Cyanogenmod 10 Nightly build(s) wifi issues

Hi all,
I recently purchased a SGS3 and ran the stock ROM for approx 30mins before flashing a CM10 nightly build (i9300 intl). Because of this I am unable to verify if the wifi was working on my home router prior to flashing a custom ROM.
At work I am able to connect to our wifi connection without problemson 2.4ghz or 5ghz. At home I've got a D-Link DSL-G604T wireless router which I am unable to connect to. I've tried changing the wifi channel, password, removing protection, factory reset and installed a seperate CM10 nightly build without any help.
When trying to connect to the WIFI connection I get the following output in adb logcat.
Anyone have any ideas what may be stopping me from connecting ot my wifi?
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
W/wpa_supplicant( 5841): wlan0: Failed to initiate AP scan
I/wpa_supplicant( 5841): wlan0: Trying to associate with 00:1e:58:80:a2:e2 (SSID
='HOMEWIFI' freq=2452 MHz)
D/CommandListener( 1913): Clearing all IP addresses on wlan0
I/wpa_supplicant( 5841): wlan0: Associated with 00:1e:58:80:a2:e2
I/wpa_supplicant( 5841): wlan0: Authentication with 00:1e:58:80:a2:e2 timed out.
I/wpa_supplicant( 5841): wlan0: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00
reason=0
More info of my phone (kernel, build etc): i.imgur.com/PRaEx.png
Cheers

You checked "Yes this is a question"
Guess where it belongs?
Moved to Q&A
Friendly Neighborhood Moderator

[Q] Yet Another Wifi Issue

I have done a lot searching around for wifi problems however I have been unable to find anything quite the same as my issue. I have tried applicable solutions for issues with similar symptoms as mine but none have worked so far. My phone runs primarily off two separate wifi networks, home and work. Security protocol at work is 802.1x EAP while home is just WPA/WPA2 PSK.
When I get to work the phone has no issue connecting to the wifi network automatically. When I get home it will not automatically connect however if I turn wifi off and on again it will connect and stay connected until I go to work again. This issue has persisted across Viper One S, TrickDroid, CM10, and CM10.1 (old and new kernel). The only time it ever automatically connected to my home wifi was when I still has the stock ROM on the phone. I have tried a number of different radios from the temporary installer in the radios thread however I hear that the temp installer is no good for CM10.1 any more since the partition for radios has been changed.
Info that may be useful.
Mods: Rooted, S-OFF, SuperCID, TWRP recovery
HBOOT: 2.15
Radio: 1.11.50.05.28 (CM10.1 now runs off device RADIO partition as I understand it)
Current ROM: CM10.1 20130717 (stock kernel 3.4.10)
Provider: Bell Canada
Relevant logcat info to follow as soon as I walk home for lunch.

This looks like the relevant information to me:
07-17 12:08:08.068 I/wpa_supplicant(744): wlan0: Authentication with [HARDWARE CODE] timed out.
07-17 12:08:10.951 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:10.951 I/wpa_supplicant(744): wlan0: Association request to the driver failed
07-17 12:08:10.951 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
07-17 12:08:10.951 E/wpa_supplicant(744): current_ssid == NULL
07-17 12:08:12.913 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:13.023 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:13.023 E/wpa_supplicant(744): Retrying assoc: 7
07-17 12:08:14.885 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:15.055 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:15.055 E/wpa_supplicant(744): Retrying assoc: 8
07-17 12:08:16.937 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:17.097 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:17.097 E/wpa_supplicant(744): Retrying assoc: 9
07-17 12:08:18.959 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:19.090 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
07-17 12:08:19.090 E/wpa_supplicant(744): Retrying assoc: 10
07-17 12:08:20.942 I/wpa_supplicant(744): wlan0: Trying to associate with [HARDWARE CODE] (SSID='Beetre-Net' freq=2427 MHz)
07-17 12:08:21.092 I/wpa_supplicant(744): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=[HARDWARE CODE] status_code=1
Some interesting things I noted:
Association request to the driver failed - Does this mean CM10.1 is having a hard time with the WiFi hardware driver?
CTRL-EVENT-ASSOC-REJECT status_code=1 - I did a quick Google for this code but was unable to find anything conclusive.
I do not believe there is an issue with my router because I am able to connect to the WiFi with my MBP without any issues. I have also tried enabling and disabling 5Ghz.

New error being thrown while the phone is unable to connect to my work wifi:
setKernelCountSet(10088, 1) failed with errno -13
Googled errno -13 but was unable to find anything. The issue connecting to my work wifi is relatively new and I assume it started with one of the nightlies since that is the only thing that would have changed.

[Completed] Cannot connect to ad-hoc wifi in Samsung matisse tablet 10.1 with BlissPop-last

Hi,
I try to connect my samsung wifi matisse 10.1, with the last ROM BlissPop installed, to an existing (and confirmed that works well) ad-hoc wifi. I don't want to make a hotspot from the tablet: this feature works perfectly. The system identifies the network as ad-hoc and asks for the WEP (128 ASCII) pass ... but after several times disconnects. This is the logcat from adb:
E/WifiConfigStore( 710): SSID temp disabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiConfigStore( 710): message=id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiConfigStore( 710): saveWifiConfigBSSID Setting BSSID for "NetBot"-WEP to any
E/WifiStateMachine( 710): CMD_AUTO_CONNECT will save config -> "NetBot" nid=7
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-REENABLED id=7 ssid="NetBot"
E/WifiStateMachine( 710): ConnectModeState SSID state=re-enabled nid=7 [id=7 ssid="NetBot"]
E/WifiConfigStore( 710): SSID re-enabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
I/wpa_supplicant( 5613): wlan0: Trying to associate with SSID 'NetBot'
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiStateMachine( 710): ConnectModeState SSID state=temp-disabled nid=7 [id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED]
E/WifiConfigStore( 710): SSID temp disabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiConfigStore( 710): message=id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiConfigStore( 710): Connection failure, blacklist "NetBot"-WEP 7 num failures 5
E/WifiConfigStore( 710): saveWifiConfigBSSID Setting BSSID for "NetBot"-WEP to any
E/WifiStateMachine( 710): CMD_AUTO_CONNECT will save config -> "NetBot" nid=7
E/WifiConfigStore( 710): rewrite network history for "NetBot"-WEP
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-REENABLED id=7 ssid="NetBot"
I/wpa_supplicant( 5613): wlan0: Trying to associate with SSID 'NetBot'
E/WifiConfigStore( 710): rewrite network history for "NetBot"-WEP
I/wpa_supplicant( 5613): wlan0: Trying to associate with SSID 'NetBot'
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiStateMachine( 710): ConnectModeState SSID state=re-enabled nid=7 [id=7 ssid="NetBot"]
E/WifiConfigStore( 710): SSID re-enabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiStateMachine( 710): ConnectModeState SSID state=temp-disabled nid=7 [id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED]
E/WifiConfigStore( 710): SSID temp disabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiConfigStore( 710): message=id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiConfigStore( 710): Connection failure, blacklist "NetBot"-WEP 7 num failures 6
E/WifiConfigStore( 710): rewrite network history for "NetBot"-WEP
What am I doing wrong?
Thanks

oscarcastell said:
Hi,
I try to connect my samsung wifi matisse 10.1, with the last ROM BlissPop installed, to an existing (and confirmed that works well) ad-hoc wifi. I don't want to make a hotspot from the tablet: this feature works perfectly. The system identifies the network as ad-hoc and asks for the WEP (128 ASCII) pass ... but after several times disconnects. This is the logcat from adb:
E/WifiConfigStore( 710): SSID temp disabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiConfigStore( 710): message=id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiConfigStore( 710): saveWifiConfigBSSID Setting BSSID for "NetBot"-WEP to any
E/WifiStateMachine( 710): CMD_AUTO_CONNECT will save config -> "NetBot" nid=7
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-REENABLED id=7 ssid="NetBot"
E/WifiStateMachine( 710): ConnectModeState SSID state=re-enabled nid=7 [id=7 ssid="NetBot"]
E/WifiConfigStore( 710): SSID re-enabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
I/wpa_supplicant( 5613): wlan0: Trying to associate with SSID 'NetBot'
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiStateMachine( 710): ConnectModeState SSID state=temp-disabled nid=7 [id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED]
E/WifiConfigStore( 710): SSID temp disabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiConfigStore( 710): message=id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiConfigStore( 710): Connection failure, blacklist "NetBot"-WEP 7 num failures 5
E/WifiConfigStore( 710): saveWifiConfigBSSID Setting BSSID for "NetBot"-WEP to any
E/WifiStateMachine( 710): CMD_AUTO_CONNECT will save config -> "NetBot" nid=7
E/WifiConfigStore( 710): rewrite network history for "NetBot"-WEP
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-REENABLED id=7 ssid="NetBot"
I/wpa_supplicant( 5613): wlan0: Trying to associate with SSID 'NetBot'
E/WifiConfigStore( 710): rewrite network history for "NetBot"-WEP
I/wpa_supplicant( 5613): wlan0: Trying to associate with SSID 'NetBot'
I/wpa_supplicant( 5613): wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiStateMachine( 710): ConnectModeState SSID state=re-enabled nid=7 [id=7 ssid="NetBot"]
E/WifiConfigStore( 710): SSID re-enabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiStateMachine( 710): ConnectModeState SSID state=temp-disabled nid=7 [id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED]
E/WifiConfigStore( 710): SSID temp disabled for "NetBot"-WEP had autoJoinStatus=0 self added false ephemeral false
E/WifiConfigStore( 710): message=id=7 ssid="NetBot" auth_failures=1 duration=10 reason=CONN_FAILED
E/WifiConfigStore( 710): Connection failure, blacklist "NetBot"-WEP 7 num failures 6
E/WifiConfigStore( 710): rewrite network history for "NetBot"-WEP
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Moving your thread to Tab 4 Q&A,Help and Troubleshooting.Experts there may be able to help you
___
v7
XDA Assist