After updating to Jelly Jean I've decided to wipe the phone in order to start clean and that's when everything started.
After wiping the phone it just didn't turn on automatically and everytime I've tried to do it I ended up on an Android animation, the same we get when we update the system, and anything happens, the animation goes away and the screen gets black.
So I've searched and found a way to get into the boot options and selected "Normal Boot" and everything seemed to be fine, but then I went out of baterry and after a full charge the Android animation came back. I did all the boot thing over again and now everytime I have to restart the phone I have to boot manually.
Can you guys help me?
Had exactly the same pub when I upgraded from its to job ota... And it's not the first time I read about this here. The only stable fix for me was to download rsd lite + the full firmware and to flash it through fast boot mode. This definitely looks like a corrupted upgrade.
I'm gonna send it back to Moto. Thanks for helping.
So ive been running CM 10.1 with CWM v6.0.4.3 for several months without major issue until last night. I went to send a text message to someone, and right as i went back to my home screen, the phone froze, rebooted, and when it finished rebooting, the deice would freeze again as soon as the lock screen was reached, and reboot again. Cue repeated circle of freeze, reboot, finish rebooting, freeze, reboot.
I turned the phone off by taking out the battery, put it back in and charged it overnight without booting it up. Went to start the phone today, same issue still. I would boot into recovery and try to re-flash the OS, and it would give me a status 7 error. After re-downloading everything into my sd card, i was eventually able to get the system to re-install cm10.1.3, and it booted up normally. I downloaded and installed ROM Manager, and installed the newest version of CWM Touch, version 6.0.4.5, and then tried to boot into recovery to install CM11. It showed the CWM Hat icon in the middle of the screen, with the version on the bottom of the screen, then rebooted on its own without showing any menu options.
Now if i try to boot into recovery, it just shows the icon and version again, then reboots, and wont go past the CM loading screen with the spinning cyanogenmod icon.
Not sure what to do at this point, i cant get into recovery to try and flash something new, and i cant get past the CM loading screen to actually use my phone. Any ideas? I have zero experience with adb, so im stumped.
UPDATE: Solved, i flashed TWRP over CWM using Odin, and was from there able to re-install the OS. Things seem to be working fine for the most part, with the exception of one random reboot last night.
Salomon3068 said:
So ive been running CM 10.1 with CWM v6.0.4.3 for several months without major issue until last night. I went to send a text message to someone, and right as i went back to my home screen, the phone froze, rebooted, and when it finished rebooting, the deice would freeze again as soon as the lock screen was reached, and reboot again. Cue repeated circle of freeze, reboot, finish rebooting, freeze, reboot.
I turned the phone off by taking out the battery, put it back in and charged it overnight without booting it up. Went to start the phone today, same issue still. I would boot into recovery and try to re-flash the OS, and it would give me a status 7 error. After re-downloading everything into my sd card, i was eventually able to get the system to re-install cm10.1.3, and it booted up normally. I downloaded and installed ROM Manager, and installed the newest version of CWM Touch, version 6.0.4.5, and then tried to boot into recovery to install CM11. It showed the CWM Hat icon in the middle of the screen, with the version on the bottom of the screen, then rebooted on its own without showing any menu options.
Now if i try to boot into recovery, it just shows the icon and version again, then reboots, and wont go past the CM loading screen with the spinning cyanogenmod icon.
Not sure what to do at this point, i cant get into recovery to try and flash something new, and i cant get past the CM loading screen to actually use my phone. Any ideas? I have zero experience with adb, so im stumped.
Click to expand...
Click to collapse
You can try to reflash CWM with Odin, if that not working, you could try to Odin back to stock.
buhohitr said:
You can try to reflash CWM with Odin, if that not working, you could try to Odin back to stock.
Click to expand...
Click to collapse
I figured it out yesterday actually and forgot to update! Indeed I was able to flash TWRP with odin, since CWM seemed to be blocking me from doing anything. Once that was up and running, things went back to normal, i was able to flash CM 10.2.1 and things seem to be working now.
One thing though, while playing skyrim last night i had it on the charger next to me, and the phone randomly rebooted without any interaction from me. Was odd, but it hasnt done it since. Keeping an eye on it still.
Hello.
I got stuk on the firmware update screen after a factory reset that never rebooted (Maybe it's because I'm having a problem with the USB port. Anyway I tried this guide http://forum.xda-developers.com/showthread.php?t=2663369 for flashing stock jelly bean (I was already in there before the softbrick) and everything went perfect, it rebooted to android, powered back of and got a PASS message at the end, but after I unplugged the phone and powered ON I got the Firmware Update screen again.
Tried another time but I decided to stop the process once it reboot to android, the phone it worked fine as long as I keep it on, if I power it off I will get the damn Firmware Update screen again after I power it ON. Also if I try a factory reset it will reboot to that screen.
Thanks in advance.
So I decided to try to flash Zombie-Pop today and everything went fine during installation but when the tablet started booting up it was stuck on "android is starting.." and it seems to load the apps. I knew it would take a bit of time to stabilize so I let it run but after 1 hour of it stuck there, I tried to reboot into recovery but I get a black screen and I can't access TWRP. It just boots right back to the android is starting screen. It doesn't seem to be a boot loop since it finishes the boot sequence. My biggest problem is not being able to access recovery because of the black screen which apparently is happening to some people with TWRP. I tried to go through adb but since my tablet isn't done installing, it doesn't have the drivers to run adb. Is my tablet toast? bricked?
edit: apologies for the title. I must have deleted the text before posting.
agentkalaw said:
So I decided to try to flash Zombie-Pop today and everything went fine during installation but when the tablet started booting up it was stuck on "android is starting.." and it seems to load the apps. I knew it would take a bit of time to stabilize so I let it run but after 1 hour of it stuck there, I tried to reboot into recovery but I get a black screen and I can't access TWRP. It just boots right back to the android is starting screen. It doesn't seem to be a boot loop since it finishes the boot sequence. My biggest problem is not being able to access recovery because of the black screen which apparently is happening to some people with TWRP. I tried to go through adb but since my tablet isn't done installing, it doesn't have the drivers to run adb. Is my tablet toast? bricked?
edit: apologies for the title. I must have deleted the text before posting.
Click to expand...
Click to collapse
Which bootloader are you on?
How are you trying to boot to recovery?
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
The_mamba said:
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
Click to expand...
Click to collapse
Pretty common prob plug it in to the wall charge see if it boots sometimes it still wont but most of the time it will the battery quality on the g3 is crap they last at most a year with a few exceptions i would first order a battery.