Database Info

{OEM}[ROM][TUTORIAL] Micromax Funbook Original Livesuit Image LEAKED !!

UPDATE : just a quicknote, i just found out that this img file makes the /system partition of 503Mb instead of 251Mb as other img for MOMO9 or older tablets, So in order to have a bigger partition, one can flash this, then install anyother rom, for instance, cyanogenmod 9/10 full version instead of lite. Good luck flashing guys
___________________________________________________________________________________________________
Hey everyone,
Presenting a leaked version of ORIGINAL MICROMAX FUNBOOK livesuit image for P300 Model (from MM SC ). If you want to revert back to original rom, worry not, no need to copy that backup file & restore using CWM recovery. Some of us were even having trouble to revert back to original with cwm backups ( failed to restore /system error!). so here is it the answer to getting back to the factory state of our tablet.
Procedure:-
JUST DOWNLOAD THE 7z FILE, EXTRACT AND FLASH THE MMX_Funbook_P300.img IN THE SAME FASHION AS OTHER LIVE SUIT IMAGES. FOR TUTORIAL ON LIVESUIT & DOWNLOADING LIVESUIT REFER :-MOMO9 LIVESUIThttp://tabletrepublic.com/forum/ivi...-ployer-momo9-firmware-rom-releases-1610.html
Congratulations on getting 100% original software installed on your rom. Go & claim your warranty if you want ( tho MM suck at it to the core )
POST INSTALL NOTES
Once you have flashed this image, you will find yourself with following specifications :-
Baseband 1.2
Build Number 97F1-D1-H2-MMX.20120914
If at this point you want to get another rom installed or you have to get root, install superuser & get clockworkmod recovery the old methods does not hold any good. You have to follow this procedure to get root & install cmw recovery. THIS METHOD IS SAME AS FOR ALL ROMS WITH BASEBAND 1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Getting the power of ROOT
Now the easiest way to get root is to use UnlockRoot software which works as a charm with our funbook device. Just connect usb cable, enable debugging & press unlock on the software. Then after the tab is restarted (by the software) you get root & superuser installed.
Getting CMW recovery on the tab
Once rooted we need to install ES File Explorer on our tab. Once installed, Go to settings, in root options tick the all boxes
Make sure superuser prompts, hence verifying successful installation of superuser. If not GET SUPERUSER UP & RUNNING FIRST.
Then navigate to the root folder by pressing back key. Stop where it says press back again to exit. ( in address bar the address will be / )
Next there will be a folder named Dev(/). long press on this folder & scroll down to set properties. Then click change, check all the boxes are ticked
Repeat the above steps with data folder (/), block folder (/dev/block), nandg file (/dev/block/nandg)
Finally all the complex part is behind us, to ultimately install the CMW recovery now, just use your old cmw recovery script for ICS, run it & done, it will be installed. Reboot & check pressing the volume down key + menu key & power key.
Njoy guys .... have fun & oh .. hit thanks too
DOWNLOAD
JUST DON'T FORGET TO VERIFY THE MD5 Sumcheck
58991EC458A6DC3421004202C0F7E929
PS: I am not responsible for any of the content nor do i take any credibility for providing the content! , i found this on the WWW & just sharing using a highspeed file server (MEDIAFIRE) and a simple guide all in one place. Don't blame me if this method do any harm or brick your tab. I did my best to be safe, i tested this & flashed successfully 4 times on my funbook p300 & its working for me. !!!!

Hey thanks a lot!! Will check this out once I am home..

Hey can u please upload this in some other site? the links given are no longer working

Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:

mechexpert said:
Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:
Click to expand...
Click to collapse
Hey thanks a lot for the quick response!! & sorry for the delay on my part..it worked like a charm..!! :victory::victory:

Link not working can you please re upload it... May be on dev host or make a torrent!!
Edit: it's working now
Sent from my LG-P970 using xda premium

anybody pls post link here pls ??? direct rom link...:silly:

PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..

devilanuj17 said:
PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..
Click to expand...
Click to collapse
oh really sorry for such late reply ... but have you tried installing another copy (fresh copy) of livesuit from the internet ? have you properly connected the tablet by pressing the vol - & options button simultaneously & hitting the power key 10 times ???
i have tried almost all those firmwares out there for funbook or momo9 ... i have faced this issue many times but you might not be pressing the button configuration accurately ... rest assured your tab is fine & 6k is not a waste as u might think !!! GOOD LUCK & report back if you still face problems, i'll help you step by step if needed !

funbook
will it work for p500?

rushiachrekar said:
will it work for p500?
Click to expand...
Click to collapse
i am afraid not, it *MIGHT* work on other tablets with ALLWINNER A10 processor.

[Root] Alcatel OT Idol 6030X - Sloved

Hi everyone,
Can please some one help me Rooting this phone.. i have tryed almost all tutorials of manual an auto rooting android Devices and nothing works..
here the specifications:
Chipset MTK 6577+
CPU Dual-core 1 GHz
1 Gb Ram
Android 4.1.1
Kernel - 3.4.0
Root:
ok ok guys i've made it....
tnks God... so ive followed 4 tutorials and the combinations of them got me to this...
i will share just take a look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i think this will work on Idol X the 6030X version only
all the files needed are here
The Sp version is on txt on the file..
User the scatter on the 7zip file
load it Sp deselect everything... but the recovery
Select the recovery on the Zip file
Power off the mobile
disconect from pc
On Sp click Download and yes and plug hte phone into the pc
Wait to complete and unplug the phone from pc..
enter on Cwm by pressing Power and Vol+ as sun u see the logo stop pressing the power and press vol+ till cwm pops.
the Zip file Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed must be on your sdcard
now follow the normal procidure to instal zip from Sdcard..
reboot phone after and open supersu, it will ask from Busybox update, choose normal, and done... install RootChecker just to verify..
My big tnks to all of you that help me to get here... and mostly to Rua1(tnks man) for this tutorial - http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Enjoe....

I would like to know how to root this phone also...
Thanks

Anyone?

@Pyntux
Poz sugradjanine
I haven't bought the phone yet but I did some research and found 2 methods but none on english :S
Hungarian - http://data.hu/get/6493358/Alcetel_OT_6030D_Root_HowTo.pdf
German - http://www.android-hilfe.de/5684068-post10.html
I tryed to translate the German text via Google, here it goes...
-Download first the files
CWM Recovery 6030D
Cwm Recovery 6.0.2.8 Neu!! Optional
MTK Droid & Tools 2.44 (without warez)
TWRP Recovery 2.4.4.0
VCOM Drivers
SpFlashtool
************************************************** ************************************************** *
MobileUncle Tools
Mobile Uncle Tools 2.8.0
-So you can very easy to flash the patched recovery
Here we go:
-Idol connected on the PC (USB debug mode must be active) and install drivers if needed
-(Must be quick startup disabled) SPFlash run tools, Scatter file and then load cwm recovery to download press idol off
-Idol on the Pc connected (the drivers are installed automatically)
-The SPflashTools will now flash the Cwm recovery. If a green circle appears everything went well.
-Unplug the cable, run MTKDroidTools.
-Switch on with Power & Volume + and simultaneously connect the smartphone to the PC
-Once this is recognized (as comic characters will appear, but everything is ok), go to "root, backup, recovery and super user click on it that can be installed.
-The display during the root process remains dark all the time with me. So do not panic
-Unplug the cable, wait a minute and long press on the power button until the logo appears idol
-I had to update suspersu (after first boot) ... but is normal.
-You can also make a backup, although that will not be complete. Important is the boot.img and recovery.img are here.
-caution: After a reboot the CWM recovery is overwritten by the stock recovery. Personally, I would leave it there so far is no 100% functional recovery
The idol is now rooted
The CWM and TWRP recovery is not 100% functional. The Custpack partitions get no support.
edit
With Mtk Droid Root Tools & backup works fine)
Hope I helped Cant wait to get the phone, just 20 days to go...
What are your impressions about the phone?
Edit: Forgot to say, this is for 6030D but it will maybe work on the other two models... Hopefully
Have you tryed this: http://forum.xda-developers.com/showthread.php?t=2160490

Pozz sugradjanine!
Thanks a lot, but I could not root that way, perhaps I'm making a mistake somewhere, gonna try again...

Pyntux said:
Pozz sugradjanine!
Thanks a lot, but I could not root that way, perhaps I'm making a mistake somewhere, gonna try again...
Click to expand...
Click to collapse
Here an Italian guide.
http://www.androidiani.com/forum/modding-alcatel/287723-root-alcatel-one-touch-star-6010d-e-idol-6030d-unaltra-anteprima-mondiale.html

Could someone translate this to English? And has anyone managed to finally root the phone?
Sent from my ALCATEL_one_touch_995 using xda premium

I do not have enough knowledge to do a this, + none of the tutorial is on in English ...
I successfully rooted all my other android devices, gt i5500, Galaxy Ace, Galaxy Tab 2, Huawei G300, but this Alcatel giving me a headache ...

Take it easy... Im working on it...
But it is not easy...
Tapatalking From The 3° Galaxy GT-9300

Look at this:
http://forum.xda-developers.com/showthread.php?t=1923764
In Idol in default.prop is "ro.secure=1" , so we need to dump boot.img and set "ro.secure=0"

Hey Guys,
I have created the Hungarian document so will guide you through but will definitely need some time.
BRB

Here you go:
http://data.hu/get/6560704/Alcatel_6030D_Rooting.pdf
Let me know if you need help!

Gets terror uploading the custom recovery To the idol...
error 1011 no enough space....
Tapatalking From The 3° Galaxy GT-9300

Please check the scatter file maybe it's incorrect. Try re-creating it once again. The Cusotm Recovery has to be smaller or equal than the recovery partition size in the scatter file.

Finallx got the phone! It's so cool! Love the slim box and it's sooo fast! Anyway, i read something about the phone losing the DRM licence after root. Now, what does this DRM licence do and can we use this phone normally without it? As much as i got it, this has something to do with the licences for the apps...
Sent from my ALCATEL ONE TOUCH 6030X using xda premium

After losing DRM, you can lose GSM signal all the way, I do not want to play with it...
@H377
Are we losing DRM after rooting?
Is that tutorial for 6030X also?
Does stock recovery owerwrite custom cwm (which we need to install) after rooting/rebooting?

Hi,
I still can use all the features on the phone after root, so I'm not quite sure if we loose anything. Still can play videos, MP3s, so all the apps work. Haven't noticed anything yet.
I think you can root the 6030X also with this procedure just be sure that you use your own scatter file extracted from your own phone. Then you cannot really mess anything up.
If you flash the stock recovery to the phone after rooting it will definitely overwrite the custom one. So normally it doesn't overwrite it automatically only if you manually flash it.

H377 said:
Hi,
I still can use all the features on the phone after root, so I'm not quite sure if we loose anything. Still can play videos, MP3s, so all the apps work. Haven't noticed anything yet.
I think you can root the 6030X also with this procedure just be sure that you use your own scatter file extracted from your own phone. Then you cannot really mess anything up.
If you flash the stock recovery to the phone after rooting it will definitely overwrite the custom one. So normally it doesn't overwrite it automatically only if you manually flash it.
Click to expand...
Click to collapse
So I need to download stock recovery with flash tool, to flash after rooting?
Also, cwm recovery in tutorial is good, no need to mod any other recovery, just to use scatter which I made with MTK?

Pyntux said:
So I need to download stock recovery with flash tool, to flash after rooting?
Also, cwm recovery in tutorial is good, no need to mod any other recovery, just to use scatter which I made with MTK?
Click to expand...
Click to collapse
It depends on:
If you have rooted the phone you can leave the custom CWM on it no need to reflash the stock recovery. But if you want to you can flash the stock back. It's all up to you.

I'm asking because I do not need cwm for now, just need root and everything else to be stock... Thanks, I will try this method...

Root canvas 2 with/running on jellybean

FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools from here
Password of sp flash [email protected]
2.recovery image
click to download
3.superuser binaries from here
Extract and open sp flash tools(run as administrator)
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
IT WILL LOOK LIKE THIS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u

what ???
if battry is not in phon...
so pross
Sent from my Micromax A110 using xda premium

Yup you have to remove battery.....all the energy needed by ur fone will be derived through ur pc(or laptop).
Sent from my Micromax A110 using xda app-developers app

so prosses was complete ??
if battery was not in the phon ???
Sent from my Micromax A110 using xda premium

Ya bro..believe me.
I personally have tested these all processes atleast 2-3 times before i post these.....
Sent from my Micromax A110 using xda app-developers app

On which rom u r?
Ics or jb

no bro...
i tested it in with battery..
but it not start donload ...
isliye me aap se puch raha tha..
kal ab karunga root aapne batai vo vali method se....
tnank bro
Sent from my Micromax A110 using xda premium

will give it a try

This will not work !
[email protected] said:
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: d-h.st/t5c
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
Open Sp flash tools (run as administrator)
click on scatter loading option and browse for the file in that folder
were you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RCOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u
Click to expand...
Click to collapse
Canvas 2 Phones which come with pre build Jelly Bean OS, has some problem.
Micromax removed all the mount point permission, so this method will give a BROM ERROR : SOC_Verification_Failed !
With or without Battery, Phone should be completely turned Off.
In some case, with battery doesnt work At all !

I know that in both cases battery doesn't work at all. I personally try all different methods before posting..
But i recommend to remove battery cuz some may connect the fone before it is completely switched off. So in order to prevent any mishappening i choose the method of playing safe.
I do not want that anybody should brick his phone and than blame my thread!!

help!!
my A110 came preloaded with stock JB 4.1.1. I tried the above method you mentioned.When i click download and connect my phone,nothing happens and it stay just like that.......please help

This is very common with all the canvas 2 users....because u guys are simply missing drivers. Not a big deal. Just follow my following thread to install drivers and den do whatever u want(root,downgrad etc)
Link: http://forum.xda-developers.com/showthread.php?t=2370906
hit thx if i helped...

error message
that last post helped me a bit.......but i am still getting an error message.......any suggestions??

It seems dat ur drivers are properly installed or otherwise flash tools wont detect ur fone at all.
But it seems a different kinda error. Have u downloaded all the files i.e. recovery and tools etc from the link given in the post?

details
Yes......I have done all the steps correctly.....still no luck......in addition I have also tried some other methods but to no result.......I have attached details about my phone if it is of any help.

U can flash suvi *rom v9* via sp flash tools as it is sp flash tools flashable rom and moreover it is PRE ROOTED to get rid of this issue.
For more info u can refer to my following thread.
Link: http://forum.xda-developers.com/showthread.php?t=2382424

If u have enough free time than u can also first downgrade then root ur fone and then again upgrade ur fone but dis time to pre rooted jb i.e. flashing jb stock rom via cwm.

thanks
can you provide a link for the following tutorial.....and also,i cant seem to find suvi rom v9.......if you can provide a link for that too,it would be much appreciated.......thanks in advance

Links of posts...
Downgrade canvas 2 to ics: http://forum.xda-developers.com/showthread.php?t=2368859
Root canvas 2 running on ics: http://forum.xda-developers.com/showthread.php?t=2368390
Upgrade canvas 2 to jb: http://forum.xda-developers.com/showthread.php?t=2382424
And regarding suvi rom link...i will provide u very sooon.
Till then best of luck buddy:thumbup:

Hey check out this link for suvi rom v9...
After flashing this ur fone will be rooted by itself and clockwork recovery will also be ported..
Sorry i am unable to provide the final download link as my add blocker is not allowing me to view the links and also some due to some other unidentified errors.
Link: http://romsforandroid.blogspot.in/2013/06/romjb-411suvi-rom-v10-neptune-with-more.html?m=1

Karbonn A12+ All Things Root Thread

Flipkart delivered my Karbonn A12+ three days back. The phone is a masterpiece to say the least. But looking at the development end of the phone, there is almost no dev support for the Karbonn A12+. Sensing that, I am starting this thread to spark some development for this device.
If you are unsure about buying this handset, here is a Detailed Review of Karbonn A12+. I have covered almost everything in the review, if you want to know anything else about the phone, do let me know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Facebook Group
Join this group if you are on Facebook.
Rooting:
Thanks to rohitm1991, we now know of a easy root method for Karbonn A12+.
Download SRSRoot One Click for your Windows PC.
Install Drivers for your phone using pdanet or Universal ADB Drivers.
Connect your phone using usb cable.
Click Smart Root in SRSRoot application on your pc.
A Prompt on your phone will ask you to install an app. Confirm.
When first two exploit fail, third exploit will launch, click Boromir on your phone and you will get a congratulation mesaage.
Reboot your phone.
If it doesn't work in first try, try again, worked for me with the exact same steps being repeated in the second try.
This video will help you in rooting:
And this one in unrooting:
Clockworkmod Recovery:
I have successfully ported Clockworkmod Recovery for our Karbonn A12+ with the help of MTK Droid Tools. I have created a special zip file to help you through the process. The files in the zip are pretty self explanatory but if you need detailed instructions, refer this guide.
Stock ROM
Thanks to chukzde, here is the cwm flashable zip of the stock rom.
I have took a full backup of the stock rom through:
SP Flash Tool, MTK Droid Tool and CWM as well. Shall upload when I have free internet to waste. Others are requested to upload one if they are blessed with a good internet connection.
Here is MT6572 Scatter file for you to use while flashing any stuff using SP Flash Tool.
Please note that old versions of SP Flash Tool will throw an error like failed to initialize on this scatter file. This file works fine with the latest version of SP Flash Tool (latest according to what I could find on the internet).
Sound Mod:
Rooted A12+ (and other device) users can use Viper Sound Mod to improve the sound quality of the phone speaker or any headset you use with it. I have shared my experience of the Viper Sound Mod on the Karbonn A12+ here.
Key Combinations:
Press and hold Volume Down + Power Button to get into Factory Mode. Selecting the only option with some english in it will factory reset your Karbonn A12+
Press and hold Volume Up + Power Button to get to a menu. In this menu, use Volume Up to scroll and Volume Down to select. From this menu, you can go to Fastboot Mode, Recovery Mode or boot normally.

Can u provide dialer.apk i wrongly uninstaled that....

arungoel1989 said:
Can u provide dialer.apk i wrongly uninstaled that....
Click to expand...
Click to collapse
http://www.mediafire.com/download/1c680yjizg053xb/Phone.apk
Sent from my A12+ using XDA Premium 4 mobile app

recovery.img not working
ur recovery is not working buddy...in mut it is
rebooting to stock recovery even after flashing the
recovery with mut

Modified Stock Launcher for Karbonn A12+
- Persistent Search bar matched to look as Jellybean style
- KitKat style Folder previews/background and App Drawer icon
Steps to Install:
Before proceeding, just to be on safer side download any other Launcher from the Play Store and use that Launcher while performing the below steps.
- Download the modified Launcher2.apk
- Using any root file explorer of your choice (I personally use ES File Explorer) copy it into /system/app
- Set permissions as -rw-r--r--
Note: Don't touch the Launcher2.odex file.
Screenshots:
Old :
New :

How to change Setting After Rooting
I want to Know is it possible to change the Android Phone Setting like Karbonn A12+.
If yes how ?
I want to Add / change Setting to add RINGTONE Selection Option for TWO SIMs in the Phone.
As the Phone does not have ringtone selection Option for the two Sims. like in Karbonn A15.
Is it possible to have such.

I got this phone couple of days back. Is it having a 2MP camera on the back. In settings picture size shows max only 2MP. no options beyond that. Can you please confirm the back camera is 5mp or 2mp ?

Nice thread. now if someone can port MIUI on this then that would be a killer combination.
even i could give it a try, is there a guide for MTK devices?

CWM recovery
karbonn a12+ got root but after flashing cwm from mobile uncle tool it get into old recovery only ............help

A12+ stuck at boot
i have A12+ and have rooted it successfully:laugh: but then in hurry i have installed chainfire downloaded long ago which is not compatible with jellybean 4.2.2 and i am stuck in boot screen (the eye) , i have already tried wiping data and cache from recovery and i have not installed cwm i have stock recovery. i could have uninstalled it via adb but 4.2.2 have sideload only hence adb commands are not working adb shell returns error : closed error. now the only option i have is to flash stock rom which i have not backed up so it would be very kind of you to upload it .or i have also read that it could be achieved by installing TWRP recovery and then renaming some files and changing some values from this linkhttp://forum.xda-developers.com/showthread.php?t=2560607 , who had similar case like me .so if anyone could provide me the stock rom and preloader drivers it would be very helpful my mobile is just a week old :crying:

my phone s dead
i rooted my a12+ as per ur giude and everything was fine for two days den suddenly it stopped working it does not even boot into recovery mode . please help !!

Nice, found another similar method over at Tech Junction.
But thx for this !

stock rom
it would be very nice if some dev puts a guide to flash stock rom and a back up of the same to help anyone who bricks his device... u cant expect a replacement frm flipkart everytim u brick one

akmalazim said:
it would be very nice if some dev puts a guide to flash stock rom and a back up of the same to help anyone who bricks his device... u cant expect a replacement frm flipkart everytim u brick one
Click to expand...
Click to collapse
I have clockworkmod backup of stock Rom, about 940 mb in size but I don't have a decent enough internet connection to upload it.

can I boot into recovery mode if my a12+ got bricked..
(stucked at boot image or eye)

@suthar98.sunil, unless an Android device is hard bricked, you can boot into recovery mode. But unless you have flashed a custom recovery like clockworkmod (link in first post) or twrp and a device backup to restore, it won't be of much use.

Scrolling interrupted at borders
Whenever i'm scrolling down in any app, no matter how slowly, it goes smoothy but is always interrupted at the borders, like in calendar, at the border between two months,in play store home page, after each app tile; or in es file explorer, after each folder while in list view, the scrolling movement bumps a little at the borders and then continues again. It happens in every app but is more visible in these. can the framework files be modified in any way to solve this issue, as I've already tried the smooth scroll tweak in the framework file and am also sure the device does not lag.
Do any of you guys out there experience this issue too?

Please provide karbonn a12+ stock rom. Please

Thanks

i flashed cwm recovery, means i can boot into recovery mode if my a12+ is hard bricked or soft bricked?

Installing twrp and rooting the sm-t116 (tab 3 lite 7.0 3g)

IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:​

Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors ​
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.

Very nice !
:laugh::laugh::laugh:

This works for 116NY too xD

hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?

I am new with Android. Please, can you describe step by step process

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right

diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.

hi...Replies to Android 4.4.4؟؟؟؟؟

h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup

Can you please post a link for custom rom

Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??

nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man

Lol they r built bro...
N i guess no one has built it...

peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted

I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this

Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...

Ok

Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??

nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted