Hi,
Searched the forums, but couldn't find a thread that talks what I need.
Currently I have my eyes set on a Trident Case from Amazon.
I'm looking for a case the offers good protection that can be used with a belt holster or a belt clip.
I've looked at holsters like these. But the issue is they are not wide enough to insert a phone that already has a cover like Trident. IF I can find a holster big enough so I can put the phone with the Trident cover in to it that would be great.
Or else maybe a belt clip that works with the Trident cover?
I'm not dead set on the Trident cover, so if you have better suggestions please let me know.
Thanks
I have the Seidio Surface case and holster. I also have 3 Nillkin cases that fit within the Seidio holster very well, but they don't offer as much protection as the Seidio case does. I definitely recommend the Seidio Surface line...it's a very well made case and holster (full body protection, felt lined case, and the holster is felt lined as well).
Of course, nothing offers the same protection as the Trident Aegis...that's like wrapping a quilt around your phone. I don't know of any holsters that fit the Aegis.
wish seidio made an active case for us...
Has anyone bought a vertical leather holster that fits the note well? I have found ones that are close but look too large according to their dimensions. Any links would be appreciated.
I'm using a Turtleback ballistic nylon case made for the Galaxy Mega 6.3 and metal belt clip (the leather covered clips fall off of my belt too easily).. It fits my note 4 with otterbox defender just fine with room to spare. They have leather cases too with either a snap or magnetic enclosure. Check them out.
There's a few times in the past where I have used different cases that I really liked with a holster since there was not a matching holster with the case.
Looks like I'm going to run in the same situation here and was wondering if anybody had a good line of holster vertical or horizontal that they would recommend.
I'd prefer something with a rotating belt clip on it.
Thank you.
Pouch with a belt clip? So like an old Blackberry one? I have a pouch from Begoos on Etsy and its great, but it doesn't have a belt clip.
Not sure exactly what you are looking for but here is one I bought..... I posted it in a thread:
http://forum.xda-developers.com/nexus-6p/accessories/dragonfly-universal-nylon-mobile-phone-t3289056
Search in Etsy. They have plenty of handmade pouches.
I should have said Holster I guess, but I figured folks would point me to case/holster combos. You know, like this...
http://www.amazon.com/TMAN-Leather-holster-Huawei-itself/dp/B0160LAOTO/
Sorry for the confusion, was a crazy night, let me update the OP.
Bump
This is the case/holster combo i use. Not the leather-y pouch like you linked, but i'm more of a fan of something more solid protecting the phone.
http://www.amazon.com/Seidio®-SURFA...id=1453249758&sr=1-3&keywords=seidio+nexus+6p
Thanks, I've sworn off of Seidio though. Cheap holsters that the clips break off of all the time, horrible customer service, and other issues I've had with them. I've found some excellent cases for the 6P, just need a holster to put it in. The TUDIA OMNIX is the one I'm trying to find a holster to fit right now.
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
y2k1ltd said:
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
Click to expand...
Click to collapse
That looks very interesting. I did buy the Seidio one similar to that one for my Nexus 6P though . I bought the one for the iPhone 6 Plus. The fit wasn't perfect but very close. I stopped using it after my phone popped out once. The clip also cracked the top of my IntelliArmor TGSP.
ReaperNY said:
That looks very interesting. I did buy the Seidio one similar to that one for my Nexus 6P though . I bought the one for the iPhone 6 Plus. The fit wasn't perfect but very close. I stopped using it after my phone popped out once. The clip also cracked the top of my IntelliArmor TGSP.
Click to expand...
Click to collapse
That's interesting. I've been using the Seidio surface holster made for the iCrap 6+ with the Nillkin Nature case without any issues or the device popping out. The clip is flat on top of the device and not at an angle suggesting the device is too tall for the holster.
y2k1ltd said:
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
Click to expand...
Click to collapse
I'd never use Seidio products again. Terrible customer service/support, and the clips for the holsters break like candy.
I believe this Encased one is only for naked phones though.
RED ZMAN said:
I'd never use Seidio products again. Terrible customer service/support, and the clips for the holsters break like candy.
I believe this Encased one is only for naked phones though.
Click to expand...
Click to collapse
This is great! i was looking for one of these when i got my phone when it launched. Gave up on looking for one after a couple weeks though. Just placed an order for this one. Thanks!!!
I broke the holster to my case when it got caught on a chair and broke the left side support. The holster is the type where the phone slides in vertically bottom to top. I don't like the type where the phone snaps into the holster or leather pouches.
Does anyone know if you can buy the holster ONLY - NO CASE for the nexus 6p?
I need a holster cover with swivel clip. I don’t care if it is made by same manufacturer as my current generic soft lining and hard plastic shell case. I have searched ebay, amazon and other sites in google but could only find replacement holsters if I buy another case. I have four different cases already so I am sure I can find one to fit the holster.
I have checked out options in this thread but checking if there are other ideas.
y2k1ltd said:
That's interesting. I've been using the Seidio surface holster made for the iCrap 6+ with the Nillkin Nature case without any issues or the device popping out. The clip is flat on top of the device and not at an angle suggesting the device is too tall for the holster.
Click to expand...
Click to collapse
I have the same Nillkin case - is the Seidio holster you're using the one for an "uncased" iphone 6+ (http://www.amazon.com/Seidio-Spring-Clip-Holster-Non-Cased-iPhone/dp/B00OBWMSBW) or did it come with the iphone 6+ case? Thanks in advance
ddenson said:
I have the same Nillkin case - is the Seidio holster you're using the one for an "uncased" iphone 6+ (http://www.amazon.com/Seidio-Spring-Clip-Holster-Non-Cased-iPhone/dp/B00OBWMSBW) or did it come with the iphone 6+ case? Thanks in advance
Click to expand...
Click to collapse
Using the Seidio surface case holster.
Ditto on Seidio holsters breaking. I had theirs for my previous phone and wouldn't recommend it. Their design is flawed. I had an encased holster for my S6 and it worked really well. Design was probably one of the better.
Bump. I'm looking for something similar. Problem is that most of the pouches I find online are cheap and will eventually tear or break somehow.
The Seidio Surface holster is a perfect match for the UAG case. They were made for each other.
Also works perfectly with the Speigen slim armour
how durable would this be compared to the otterbox defender? its what I currently have but Im looking for something slightly slimmer and without the plastic screen cover. I want a tempered glass one
The UAG won't go face out in the holster, just face in.
Last seidio case/holster combo I had wouldn't go face out either. Face in I'd far better for protecting the phone, however you can't make use of the kickstand feature of the holster. Luckily the case had a kickstand built in. I only use speigen clear case now though.
Sent from my LG-H901 using Tapatalk
Is the UAG case slippery?
Love the UAG. I have about 7 cases but always come back to the UAG
jax_112 said:
Love the UAG. I have about 7 cases but always come back to the UAG
Click to expand...
Click to collapse
I know the case that comes with the Seidio Surface Holster is slippery. Is the UAG case slippery?
No not at all
jax_112 said:
No not at all
Click to expand...
Click to collapse
awesome thanks.
Seeing if anyone seen or know of any holsters that work, or cases that come with holsters(like seidio, Otterbox defender, etc)?
I'm using the Seidio holster for the Note 7 and it fits the device with a thin hard case or tpu case. If the case is rigid border with tpu, it won't fit since it makes it too wide.
y2k1ltd said:
I'm using the Seidio holster for the Note 7 and it fits the device with a thin hard case or tpu case. If the case is rigid border with tpu, it won't fit since it makes it too wide.
Click to expand...
Click to collapse
OK cool I'll have to check that out. I appreciate that. What is a good case for it?
tomcat420m said:
OK cool I'll have to check that out. I appreciate that. What is a good case for it?
Click to expand...
Click to collapse
I have this one Ultra thin Mate 9 Case
and this one
Huawei-Mate-9-Case-Rock-Fit-Slim-Back-Shockproof-Drop-Protective-Case-Black
A fellow member used this belt clip and said it works great... iv ordered and will report back...
https://www.amazon.com/gp/product/B01B6QX66G/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Kind of sad how limited options this phone has in way of accessories. Thought after the 6P, would of brought more attention to Huawei. Appreciate the info on that one, but I've never been a fan of those slider holsters.
Here is my setup
https://forum.xda-developers.com/showpost.php?p=71177857&postcount=132