Which HTC Desire S Custom ROMs will work with OpenPDroid?
What do I need to do to get both working on my device?
zurpher said:
Which HTC Desire S Custom ROMs will work with OpenPDroid?
What do I need to do to get both working on my device?
Click to expand...
Click to collapse
Your best bet is to look at using CyanogenMod and search for ApG (Autopatcher) to patch it with openPDroid yourself.
Is CyanogenMod 7.2.0 the latest stable Custom ROM version that is available for the HTC Desire S?
There seems to be no patch for CM 7.2 but only CM 10 and CM 10.1
If I understand it correctly than I could only use OpenPDroid via mateor's auto-patcher with the following ROMs: CM10, CM10.1, AOKP Jellybean 4.1.2, AOKP Jellybean 4.2.1, AOSP 4.1.2, and AOSP 4.2.1
Is any of these ROMs available for the HTC Desire S?
zurpher said:
Is CyanogenMod 7.2.0 the latest stable Custom ROM version that is available for the HTC Desire S?
There seems to be no patch for CM 7.2 but only CM 10 and CM 10.1
If I understand it correctly than I could only use OpenPDroid via mateor's auto-patcher with the following ROMs: CM10, CM10.1, AOKP Jellybean 4.1.2, AOKP Jellybean 4.2.1, AOSP 4.1.2, and AOSP 4.2.1
Is any of these ROMs available for the HTC Desire S?
Click to expand...
Click to collapse
I'd be tempted to try patching the ROM listed below and see where it gets you - nothing to lose and possibly everything to gain.
[ROM][10 JUL 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1
Doesn't reaper have the pdroid patch already?
"In the end, everything is a gag."
- Charlie Chaplin (1889-1977)
jugg1es said:
Doesn't reaper have the pdroid patch already?
Click to expand...
Click to collapse
Of course it does - how could I have forgotten that on my old favourite ROM? Thanks mate :good:
I think there is a difference between pdroid and openpdroid, but it may well do what the OP needs.
zurpher said:
Is CyanogenMod 7.2.0 the latest stable Custom ROM version that is available for the HTC Desire S?
There seems to be no patch for CM 7.2 but only CM 10 and CM 10.1
If I understand it correctly than I could only use OpenPDroid via mateor's auto-patcher with the following ROMs: CM10, CM10.1, AOKP Jellybean 4.1.2, AOKP Jellybean 4.2.1, AOSP 4.1.2, and AOSP 4.2.1
Is any of these ROMs available for the HTC Desire S?
Click to expand...
Click to collapse
Take a look at dev section. There are several of these Jellybean roms available there
If you wish to stick with CM7.2, you can use the original Pdroid which was designed for gingerbread
http://forum.xda-developers.com/showthread.php?t=1357056
SimonTS said:
I'd be tempted to try patching the ROM listed below and see where it gets you - nothing to lose and possibly everything to gain.
[ROM][10 JUL 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1
Click to expand...
Click to collapse
I guess I shouldn't try to use the auto-patcher and I have no clue how to compile from source. :-/
jugg1es said:
Doesn't reaper have the pdroid patch already?
Click to expand...
Click to collapse
Good to know. I'm glad a developer bothered to integrate it into their ROM.
ContactFront said:
Take a look at dev section. There are several of these Jellybean roms available there
If you wish to stick with CM7.2, you can use the original Pdroid which was designed for gingerbread
http://forum.xda-developers.com/showthread.php?t=1357056
Click to expand...
Click to collapse
Why would I want to stick with an old version? I am quite happy with current ROMs if they are stable.
I even don't know the difference between Jellybean and CM. Shame on me.
zurpher said:
I guess I shouldn't try to use the auto-patcher and I have no clue how to compile from source. :-/
Click to expand...
Click to collapse
There's no harm in trying to use ApG. If it fails to patch then it will tell you quite clearly - it won't generate an incomplete patch.
zurpher said:
Good to know. I'm glad a developer bothered to integrate it into their ROM.
Click to expand...
Click to collapse
zurpher said:
Why would I want to stick with an old version? I am quite happy with current ROMs if they are stable.
I even don't know the difference between Jellybean and CM. Shame on me.
Click to expand...
Click to collapse
Jellybean simply refers to Android v4.1 / v4.2 (currently) which is CM10.1
ICS refers to Android v4.0 which is CM10
i used ApG on 4.2.2 before and i never had any issues.it is pretty easy to use
SimonTS said:
Jellybean simply refers to Android v4.1 / v4.2 (currently) which is CM10.1
ICS refers to Android v4.0 which is CM10
Click to expand...
Click to collapse
I believe that OpenPDroid won't work on [ROM][10 JUL 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1 because it is 4.2.2 instead of the OpenPDroid-supported 4.1.2 or 4.2.1?
Could the following HTC Desire S ROMs technically function with OpenPDroid?
[ROM][15 FEB 13][CodeFireX][BR11\SR12]4.2.1\4.2.2 builds | Finally
[ROM][08 FEB 13] [JB4.2.1] JellyTime CM10.1 R6.1 - SAGA Edition | AROMA
Which of those two would you recommend? Why?
Probably not [ROM][28 FEB 13] MIUIzero v9 (JB 4.1.2) (MIUI 3.2.22) as MIUI is not supported by OpenPDroid.
zurpher said:
I believe that OpenPDroid won't work on [ROM][10 JUL 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1 because it is 4.2.2 instead of the OpenPDroid-supported 4.1.2 or 4.2.1?
Click to expand...
Click to collapse
Autopatcher supports v4.2.2 absolutely fine - I've used it on my LG 4X HD without any issues at all, and the official thread even states;-
Android 4.2.2 now supported!!!(New autopatcher team member Caldair has taken over tabletUI and it works for CM10 and CM10.1 for all devices!
Click to expand...
Click to collapse
I would try it myself, but it claims about 5 hours to download from bnd's repo and I've got better things to do with my afternoon
SimonTS said:
Autopatcher supports v4.2.2 absolutely fine - I've used it on my LG 4X HD without any issues at all, and the official thread even states;-
I would try it myself, but it claims about 5 hours to download from bnd's repo and I've got better things to do with my afternoon
Click to expand...
Click to collapse
I have problems to get ApG 2.6.0.1 on Win7 working. I ran it as administrator in a non-Windows folder as advised here. It does not download Java and Cygwin though. I've downloaded it manually. How can I add it?
zurpher said:
I have problems to get ApG 2.6.0.1 on Win7 working. I ran it as administrator in a non-Windows folder as advised here. It does not download Java and Cygwin though. I've downloaded it manually. How can I add it?
Click to expand...
Click to collapse
try download again.. my download failed for the first time too.
Sent from my GT-I9505 using Tapatalk 2
As an alternative to using pdroid, you could use the 'xposed framework' and xposed privacy. It's a very good system and would fit your needs.
Here's the link for the framework apk.
http://forum.xda-developers.com/showthread.php?t=1574401
[FRAMEWORK ONLY!] Xposed - ROM modding without modifying APKs (2.1.4)(12.05.2013)
A quick search will give the the privacy mod for it.
"In the end, everything is a gag."
- Charlie Chaplin (1889-1977)
hisname said:
try download again.. my download failed for the first time too.
Click to expand...
Click to collapse
I eventually managed to get ApG working and ran it on cm-10.1-20130719-UNOFFICIAL-saga.
As a result I know have three files instead of one:
cm-10.1-20130719-UNOFFICIAL-saga
cm-10.1-20130719-UNOFFICIAL-saga-20130721-restore
cm-10.1-20130719-UNOFFICIAL-saga-openpdroid-20130721-update
How do I proceed from here?
zurpher said:
I eventually managed to get ApG working and ran it on cm-10.1-20130719-UNOFFICIAL-saga.
As a result I know have three files instead of one:
cm-10.1-20130719-UNOFFICIAL-saga
cm-10.1-20130719-UNOFFICIAL-saga-20130721-restore
cm-10.1-20130719-UNOFFICIAL-saga-openpdroid-20130721-update
How do I proceed from here?
Click to expand...
Click to collapse
cm-10.1-20130719-UNOFFICIAL-saga
and
cm-10.1-20130719-UNOFFICIAL-saga-openpdroid-20130721-update
Sent from my GT-I9505 using Tapatalk 2
zurpher said:
I eventually managed to get ApG working and ran it on cm-10.1-20130719-UNOFFICIAL-saga.
As a result I know have three files instead of one:
cm-10.1-20130719-UNOFFICIAL-saga
cm-10.1-20130719-UNOFFICIAL-saga-20130721-restore
cm-10.1-20130719-UNOFFICIAL-saga-openpdroid-20130721-update
How do I proceed from here?
Click to expand...
Click to collapse
It should be fairly obvious really. Flash the main ROM, then flash the 'update' to 'update' with openpdroid. You will need to install PDroid Manager to make use of openpdroid.
The 'restore' file is to flash to remove the changes - an exact reversal of the 'update' zip.
SimonTS said:
It should be fairly obvious really. Flash the main ROM, then flash the 'update' to 'update' with openpdroid.
Click to expand...
Click to collapse
I assumed that it would be all in one file. Which method do you recommend for flashing? I know they are a couple around and I haven't done it for a long time. So I currently don't know which one is to be recommend.
zurpher said:
I assumed that it would be all in one file. Which method do you recommend for flashing? I know they are a couple around and I haven't done it for a long time. So I currently don't know which one is to be recommend.
Click to expand...
Click to collapse
Sorry, I'm confused now. There is only one method I'm aware of for flashing ROMs - boot to recovery and flash the .zip file.
Related
Well since the international hox has jb (not justin beiber) already http://forum.xda-developers.com/showthread.php?t=1737736 I'm wondering if anyone is working on getting jb (still not justin bieber) running on the xl?
G4 Man2 said:
Well since the international hox has jb (not justin beiber) already http://forum.xda-developers.com/showthread.php?t=1737736 I'm wondering if anyone is working on getting jb (still not justin bieber) running on the xl?
Click to expand...
Click to collapse
we need kernel source. After that it will be just a matter of time. The International HOX also shares a chipset with the Nexus 7 so that helps
gunnyman said:
we need kernel source. After that it will be just a matter of time. The International HOX also shares a chipset with the Nexus 7 so that helps
Click to expand...
Click to collapse
Any news on getting that kernel source?
I'm assuming that we wont have full AOSP roms until we have that source?
Any news on getting S-OFF?
Man, I really cant stand sense anymore
zoltrix said:
Any news on getting that kernel source?
I'm assuming that we wont have full AOSP roms until we have that source?
Any news on getting S-OFF?
Man, I really cant stand sense anymore
Click to expand...
Click to collapse
Go pester HTC and att to release kernel source.
Sent from my HTC One X using xda app-developers app
zoltrix said:
I'm assuming that we wont have full AOSP roms until we have that source?
Any news on getting S-OFF?
(
Click to expand...
Click to collapse
Have you tried the CM9 ROM in development or the AOKP ROM over on Rootzwiki? They are both functional enough to be used as a daily driver.
Why do we need S-off? We can already do basically everything through recovery without it. Would it be nice to have, sure I guess, but definitely not needed.
Kernel source will be released. Could be soon, could be September. We don't know when. But it will be released. Once it is available we will have answers.
Sent from my HTC One X using xda app-developers app
pside15 said:
Have you tried the CM9 ROM in development or the AOKP ROM over on Rootzwiki? They are both functional enough to be used as a daily driver.
Why do we need S-off? We can already do basically everything through recovery without it. Would it be nice to have, sure I guess, but definitely not needed.
Click to expand...
Click to collapse
yea s-off isn't needed, but nice to have.
i've been following the cm9 thread, and it seems great but ive been using my camcorder almost non-stop and i'll miss it for sure
I saw on one of the threads for either MIUI or CM9 but I don't remember which that someone got the camcorder working? I have the file in my download folder on my phone but I haven't tried it yet. I'm just keeping it for if and when I decide to try out MIUI or CM9.
I loaded an unofficial CM9 Alpha 5 ROM on my North American HTC One X and the camera worked, although nowhere near as good as the camera app in the stock HOX software. Camcoder was flaky and crashed periodically. A video I posted on YouTube circa 4:50 has a demo of it: http://www.youtube.com/watch?v=XPi8a5SvJvQ.
If interested, the build I loaded was the alpha5 in the thread "[ROM][WIP] Unofficial CM9 Port - Alpha 5" http://forum.xda-developers.com/showthread.php?t=1688448. Beware of rapid battery drain if you choose to load this alpha5 build I recommend taking 30 minutes and reading through the thread prior to flashing this ROM for details.
Note, however, that this ROM is based off Android 4.0.4 (Ice Cream Sandwich), not 4.1 (Jelly Bean), so this discussion might be a little off topic for this thread
Hello to all!
Something regarding Android 4.1.2 Dumped from Asus Nexus?
There are sources already, AOKP build 5 will likely be 4.1.2.
K900 said:
There are sources already, AOKP build 5 will likely be 4.1.2.
Click to expand...
Click to collapse
@K900. just curious, why dont you have a thread for your AOKP build on xda?
paranoid android is upgraded to 4.1.2
catfishbilly said:
@K900. just curious, why dont you have a thread for your AOKP build on xda?
Click to expand...
Click to collapse
Because XDA is, well, XDA.
devilpera64 said:
Hello to all!
Something regarding Android 4.1.2 Dumped from Asus Nexus?
Click to expand...
Click to collapse
why a nexus7 dump?sources was been pushed to AOSP,we have only to wait that teams rebase their roms .Anyways,i have it running on mine devices,and it's nothin special to have rush to test it.
Latest TeamEOS3 #77 is updated to 4.1.2
Seems to be working fine so far.
ParanoidAndroid is 4.1.2 and is by far the fastest ROM I have used including cm10 and eos3 that I keep flip flopping between.
I have found a happy home for now.
Cheers
agreed.on paranoid now,recame here after trying eos,but i prefer this so much more.don't like eos at all
sert00 said:
agreed.on paranoid now,recame here after trying eos,but i prefer this so much more.don't like eos at all
Click to expand...
Click to collapse
Why? ^_^
Hello, everyone. Can any one make a stock Rom for MZ 601 with a working 3g from (http://forum.xda-developers.com/showthread.php?t=1936534)?
sorry if i made it in the wrong thread.
The mz601 does not have stock 4.1.2... The latest stock for our device is 4.0.4
not stock but custom rom , you can choose :
TeamEOS
CodenameAndroid
CyanogenMod (cm10 experimental)
maybe you could check this it should be for mz601 but I've not tested it:
http://android.clients.google.com/p...gned-tervigon-JZO54K-from-JRO03H.75baa171.zip
L.
thenemis said:
not stock but custom rom , you can choose :
TeamEOS
CodenameAndroid
CyanogenMod (cm10 experimental)
Click to expand...
Click to collapse
I am not asking for a official stock rom, but for custom rom near to the stock.
TeamEOS has made a rom using this 4.1.2 base but they add alot of stuffs which made it some how lagy.
I just want some one to add 3g to that rom (http://forum.xda-developers.com/show...hp?t=1936534) if it is possible.
lupick said:
maybe you could check this it should be for mz601 but I've not tested it:
http://android.clients.google.com/p...gned-tervigon-JZO54K-from-JRO03H.75baa171.zip
L.
Click to expand...
Click to collapse
i open the build pro file and it does seems to change anything. it just won`t let your xoom to boot.
mohamed_moscow said:
I am not asking for a official stock rom, but for custom rom near to the stock.
Click to expand...
Click to collapse
go for CM10 experimental 10/14 builds , one of last post:
https://plus.google.com/u/0/104860219450510860872/posts/gL65SH8FBaU
Moved to Q & A section.
Sent from my Galaxy Nexus using Tapatalk 2
thenemis said:
go for CM10 experimental 10/14 builds , one of last post:
https://plus.google.com/u/0/104860219450510860872/posts/gL65SH8FBaU
Click to expand...
Click to collapse
Thanks, that what I needed.
hi Everyone
why is the htc Saga not getting any Cm official nightlies ? 9 or 10?
We got official ics( via ruu) and kernel sources?
mayurh said:
hi Everyone
why is the htc Saga not getting any Cm official nightlies ? 9 or 10?
We got official ics( via ruu) and kernel sources?
Click to expand...
Click to collapse
why don't you use other roms like jelly time and nk111's
sbsbsb123 said:
why don't you use other roms like jelly time and nk111's
Click to expand...
Click to collapse
tried pacman which is a combination
how stable are those roms? is everything working?
i seen a few issues
but anyways.still wondering why no official cm nightlies?
mayurh said:
tried pacman which is a combination
how stable are those roms? is everything working?
i seen a few issues
but anyways.still wondering why no official cm nightlies?
Click to expand...
Click to collapse
Because to have official support it has to be out of Alpha/Beta stage. In other words it has to be completely stable on hardware level (kernel and proprietary binaries) before it can be included in the main repo and build with only CM not device changes. CM devs will not bother to fix device stuff, only OS related. So if you are reading the CM10 threads you will know that we are far from that still. It may be working but not for all (example the hitachi panel users). Until this is fixed - no official support.
amidabuddha said:
Because to have official support it has to be out of Alpha/Beta stage. In other words it has to be completely stable on hardware level (kernel and proprietary binaries) before it can be included in the main repo and build with only CM not device changes. CM devs will not bother to fix device stuff, only OS related. So if you are reading the CM10 threads you will know that we are far from that still. It may be working but not for all (example the hitachi panel users). Until this is fixed - no official support.
Click to expand...
Click to collapse
thanks for the explanation dude
appreciate it. now i understand
i always thought the cm guys do the work them selves to get everythign working correctly.guess i was wrong
so our devs have to get it stable first.then they add it
Q&A for [ROM][4.4.4][OFFICIAL] CM-11.0 for tf300t
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][OFFICIAL] CM-11.0 for tf300t. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
T300T CM11.0 nightlies?
Is it just me, or are all of the CM11 nightlies gone?
Some of the CM12 nightlies as well. Are there any mirrors?
Anyone have any CM11 roms where the Cast Screen function actually works?
shdware said:
Is it just me, or are all of the CM11 nightlies gone?
Click to expand...
Click to collapse
you're not alone, as posted in another thread i cant find cm11 nightly for tf300t anymore everywhere!
i need to downgrade to cm11 from a dirty install of one of the last cm12 nightly but i wonder how can i if official cyano repo doesnt work...
so, if anybody can put somewhere the cm-11-20150105-NIGHTLY-tf300t.zip i really appreciate it!
CM11.0 4.4.4 dead?
It looks like all of the nightlies are gone.
I'm looking for a KitKat rom that allows:
- overclocking
- a working 'cast screen' function
- stability!
Are there any? It doesn't look like Lollipop is ready yet for a daily driver.
shdware said:
It looks like all of the nightlies are gone.
I'm looking for a KitKat rom that allows:
- overclocking
- a working 'cast screen' function
- stability!
Are there any? It doesn't look like Lollipop is ready yet for a daily driver.
Click to expand...
Click to collapse
Overclocking is generally a kernel feature; try grimlock, geass, katkernel, or _that kernels with any KK ROM for overclocking. I was running a KK PacROM which was quite stable prior to switching to LP. Try KatKiss for a great LP ROM. I don't use cast screen so I can't help with that.
shawnbrennan55 said:
Overclocking is generally a kernel feature; try grimlock, geass, katkernel, or _that kernels with any KK ROM for overclocking. I was running a KK PacROM which was quite stable prior to switching to LP. Try KatKiss for a great LP ROM. I don't use cast screen so I can't help with that.
Click to expand...
Click to collapse
I'm still fairly new to this and wasn't aware that you could install a ROM with a different kernel; I'm used to just flashing and taking whatever is in the package.
Is there a more comprehensive guide on how to do this exactly? I'm enjoying the speed boost from the Zombi ROM which uses Grimlock's kernel, but when the docking station is plugged in the touchscreen is all over the place, so this isn't going to work for me.
OMNIrom seems to be updated fairly regularly and the docking station did pretty well, but I was locked into a stock speed.
shdware said:
I'm still fairly new to this and wasn't aware that you could install a ROM with a different kernel; I'm used to just flashing and taking whatever is in the package.
Is there a more comprehensive guide on how to do this exactly? I'm enjoying the speed boost from the Zombi ROM which uses Grimlock's kernel, but when the docking station is plugged in the touchscreen is all over the place, so this isn't going to work for me.
OMNIrom seems to be updated fairly regularly and the docking station did pretty well, but I was locked into a stock speed.
Click to expand...
Click to collapse
Just flash the kernel zip file from recovery, wipe cache/dalvik, then reboot. On LP you can skip the wipe cache/dalvic step.
Stable version?
Does anybody know when a stable version of CM 11 will be published? I'm still on CM 10 and a bit cautious with upgrading the tablet.
ViseMoD said:
Does anybody know when a stable version of CM 11 will be published? I'm still on CM 10 and a bit cautious with upgrading the tablet.
Click to expand...
Click to collapse
Forget CM11. KatKiss 5.1 is beautiful. I've got it running on my TF300T and a TF700 with a custom kernel.
It's faster than CM11. Try it - you won't regret it.
Google Play Store and me301t with Cyanogen 11
Hello,
i have installed UNOFFICIAL][4.4.4] Cyanogenmod 11.0. I have no playstore. In this thread there is a link but all answer are deleted. When can i find this file for my me 301t?
Thanks you!!
falcoman33 said:
Hello,
i have installed UNOFFICIAL][4.4.4] Cyanogenmod 11.0. I have no playstore. In this thread there is a link but all answer are deleted. When can i find this file for my me 301t?
Thanks you!!
Click to expand...
Click to collapse
CyanogenMod never comes with Play or other Google apps. Flash a GAPPS package of your preference.
Sent from Google Nexus 4 @ CM12.1
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
official and unofficial cm 11, that is the question?
excuse me again.... i have installed unofficial cm 11.0. What is the difference between official and unofficial.
do you think it would be better if i install official?
thanks you
curently i have 11-20141024-unofficial-me301t
is it the best version in cm11?
.
AndyYan said:
CyanogenMod never comes with Play or other Google apps. Flash a GAPPS package of your preference.
Sent from Google Nexus 4 @ CM12.1
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
Click to expand...
Click to collapse
falcoman33 said:
excuse me again.... i have installed unofficial cm 11.0. What is the difference between official and unofficial.
do you think it would be better if i install official?
thanks you
curently i have 11-20141024-unofficial-me301t
is it the best version in cm11?
.
Click to expand...
Click to collapse
There's no official version for ME301T, so keep what you have, unless you find a version that's more up-to-date. The latest CM11 I can find for TF300T is 20150112.
Sent from Google Nexus 4 @ CM12.1
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]