Chainfire 3d for GT-S7500 - Samsung Galaxy Ace Plus S7500

AGAIN THE BORING DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO UR PHONR DURING THE PROCESS
DO IT AT UR OWN RISK
Note that this is only for gingerbread not for ics or jellybean
Here is how to install chainfire 3d and plugins on sga+
Installation:
Dowbload chainfire 3d for your device
Open chainfire
Select CF3D driver under options
Click install (ur device will reboot)
Open chainfire 3d
Select default open gl settings
Then select reduce texture quality
Select reduce texture size
You are done!!!
Now plugins:
Make plugins folder in ur sd card and put plugins in it
Open chainfire 3d
Select install plugins
It will search for plugins (keep patience)
There would be list of plugins
Install all of them
Now go back
Select defaul open gl settings
Select reduce texture quality and reduce texture size
Select use a plugin
Select QUALCOMM
Enjoy!!!
HIT THANKS IF I HELPED
Plugins:
https://dl.dropboxusercontent.com/u/86675078/Plug-ins/libGLEMU_NVIDIA.zip
https://dl.dropboxusercontent.com/u/86675078/Plug-ins/libGLEMU_POWERVR.zip
https://dl.dropboxusercontent.com/u/86675078/Plug-ins/libGLEMU_QUALCOMM.zip
Sent from my GT-S7500

Related

Angeeks_MotoME865_4.12_6902_UISS_CN_Q2

next from angeek too !!! this rom we need to thx莫少俊熙灬 <----also chinse name :good: (nice guy)
this rom can flash it in hktw and china 4.1 both =) att user cant flash =(
The system features:
1. use aroma flash method !!
2. battery 1%mod and jelly bean status bar and apple style word...
3. odexed , zipaligned and fast gps locked
4. volume unclock and host ( dial *#*#6686#*#*)
5.repair offical jb4.1.2 bug ( repair camera , gallery ,gps , alarm, wifi )
6. new build.prop ...(from PIM-MY-ROM creator :androguide.fr)
7. add 3d gallery ( first time to in this api will little bit slow)
8.add sony bravia engine...
9.use apex launcher
10. in boot Zipaligned optimization
11. add G turbocharger ( increase 3g speed , wifi)
12. IO optimization ...increase open apk speed
13. add new v6 super charger -U9-RC12-T6 (will more power save ) (from xda - zeppelinrox)
14. improve photo quality ( from xda -pimp-my-rom -------Androguide.fr)
15. use boost v3 ....stable ram using ...
16. LED light control and cpu control ...etc ... find it in system setting!!!!!!!!!!!!!!
17.tune the lowest screnn light ~!
18. in aroma flast mode ...u can choose many patch or simplify .......as u like( i dont know is it chinese or english in this aroma mode==)
19.. still have a lot....u find it urself!!
image:
http://attachment.angeeks.com/forum/201302/14/222838s65hn4xsdludipi2.jpg
http://attachment.angeeks.com/forum/201302/14/222838s65hn4xsdludipi2.jpg
http://attachment.angeeks.com/forum/201302/14/222836qmcpbczovm49hc7p.jpg
http://attachment.angeeks.com/forum/201302/14/22283390400mq9dyuud9ck.jpg
Download link :http://pan.baidu.com/share/link?shareid=261038&uk=4046361900
google sever pack :http://pan.baidu.com/share/link?shareid=167901&uk=2600960059
remember use the new boot menu to flash this rom =)
flash in zip~!!!!!!!!!:good:
flash instruction:
1. download the rom , u will saw Angeeks_MotoME865_4.12_6902_UISS_CN_Q2.zip and put it in SD card!
2.go to recovery
3.choose wipe & clean and wipe data & cache(factory reset) -YES-
4.choose wipe & clean enter in and wipe cache enter in - yes -
5. choose wipe & clean enter in and choose wipe dalvil cache enter in - yes-
6.choose wipe & clean enter in , wipe battery stats enter in - yes-
7.after wipe ...then choose install zip package and enter
8.then install a zip package and enter
9.scroll down to Angeeks_MotoME865_4.12_6902_UISS_CN_Q2.zip and enter
10.scroll down to yes and enter
11,wait.......(u will see some UISS team photo)
12.show welcome and type 下一步(next step)
13.will show another flash mode and some agreement ....and see a box to tick... and press下一步(next step)
14.press 下一步(next step)
15.then will in auto delect date ,,after that press下一步(next step )
16. u will in aroma flash mode ....there are 3 type to let u chooose
1.是默认安装(install default) 2. 是精简安装 (simplify installation ) 3.( custom select ) (u can try if u know chinese )
17.after choose installation , press下一步(next step )
18.will enter the installation interface then press开始(start button) in right bottom conner
19.wait,,,unitl finish=)
20.after install press 下一步(next step)
21. finallly finish all installation...and press 完成(finish)
dont touch anything until it enter to the start boot!!
orignal post http://bbs.angeeks.com/forum.php?mo...lter=author&orderby=dateline&orderby=dateline
so far have you observed any bugs?

LiquidSmooth ROM for Qmobile Noir A8

i am not responsible if you damage your phone in any way.
This is your own desicion and if you make a mistake and blame me for it.
I will laugh at you and i will laugh hard. Enjoy
HERE ARE THE TWEAKS FOR THE ROM
60 fps
full cpu/gpu utilization
zipaligned all apks for better ram optimization
busybox added
inti.d support added
build.prop tweaks
net speed tweaks
faster gps lock
xposed framework added for dual panel mode
viper4android for amazing sound
xtheme engine added (similar to the theme engine found on cyanogenmod)
kernel tweaks
better deep sleep mode
faster internet
touch quality improved
scrolling speed improved
extremely smooth
no lag in UI
most unique ROM​
Download ROM from HERE
CREDITS
VIPER4ANDROID-ZHUHANG
XPOSED FRAMEWORK-ROVO89
XTHEME ENGINE-mcsqwizzys98
BASE ROM-WINGOKU​
Wingoku's website: http://wingoku.blogspot.com/
Reserved for patches
HOW TO FLASH ROM
1) Download Rom Zip File from the Link Above
2) Put into External/Internal SD Card
3) Go To CMW/TWRP/LEWA Recovery
4) Wipe Data/Factory Reset
5) Go to 'Mounts and Storage' and Format System
6) Select 'Install zip From Sdcard' and choose the Rom Zip File
7) Select Yes and The Installation will Start
8) Reboot Phone after Installation is Complete
9) Put Information & Complete Setup Wizard
10) Open 'Xposed Installer' from App Drawer
11) Select 'Install/Update' and close the App
12) Open 'Viper4AudioFX' from App Drawer
13) Follow Steps to Install Viper given BELOW
14) Go to Recovery Again
15) Fix Permissions and Wipe Dalvik Cache from Advanced Menu
16) Reboot the Phone​
How to Use ViPER Audio Engine:
-Open 'ViPER4AndroidFX' from App Drawer
-Select "Yes" Option for Installing Drivers
-Choose CPU as 'Cortex A8 with NEON'
-The Driver's Will Install
-Reboot the Phone
-Open the Application Again
-Tick Mark the option of Enabling ViPER Engine
-Do Same for Headset & Bluetooth Mode
-Set other Sound Options
-Enjoy Amazing Audio Quality
HOW TO USE XTHEME ENGINE:
Just follow these steps carefully:
-Download the Apk and install it in your phone.
https://www.dropbox.com/s/3ciz2clswmxa6i7/XThemeEngine_beta5.apk
- After installing, open Xposed Installer app and from modules section...tick mark the theme engine app
- Reboot the Phone
- Install theme apk files...the ones you like... (links given below)
- Open the Theme Engine App
-Select the theme you installed
- Reboot and Enjoy
Thread from which you can get themes:
http://forum.xda-developers.com/showthread.php?t=2219999
reserved for screenshots
Screenshots coming soon
Waiting for screen shots.
My friend owns A8 and I'm sure that it will be good for him.
nathanjp said:
HOW TO FLASH ROM
1) Download Rom Zip File from the Link Above
2) Put into External/Internal SD Card
3) Go To CMW/TWRP/LEWA Recovery
4) Wipe Data/Factory Reset
5) Go to 'Mounts and Storage' and Format System
6) Select 'Install zip From Sdcard' and choose the Rom Zip File
7) Select Yes and The Installation will Start
8) Reboot Phone after Installation is Complete
9) Put Information & Complete Setup Wizard
10) Open 'Xposed Installer' from App Drawer
11) Select 'Install/Update' and close the App
12) Open 'Viper4AudioFX' from App Drawer
13) Follow Steps to Install Viper given BELOW
14) Go to Recovery Again
15) Fix Permissions and Wipe Dalvik Cache from Advanced Menu
16) Reboot the Phone​
How to Use ViPER Audio Engine:
-Open 'ViPER4AndroidFX' from App Drawer
-Select "Yes" Option for Installing Drivers
-Choose CPU as 'Cortex A8 with NEON'
-The Driver's Will Install
-Reboot the Phone
-Open the Application Again
-Tick Mark the option of Enabling ViPER Engine
-Do Same for Headset & Bluetooth Mode
-Set other Sound Options
-Enjoy Amazing Audio Quality
HOW TO USE XTHEME ENGINE:
Just follow these steps carefully:
-Download the Apk and install it in your phone.
https://www.dropbox.com/s/3ciz2clswmxa6i7/XThemeEngine_beta5.apk
- After installing, open Xposed Installer app and from modules section...tick mark the theme engine app
- Reboot the Phone
- Install theme apk files...the ones you like... (links given below)
- Open the Theme Engine App
-Select the theme you installed
- Reboot and Enjoy
Thread from which you can get themes:
http://forum.xda-developers.com/showthread.php?t=2219999
Click to expand...
Click to collapse
Unable to install Status 7 Error on CWM Recovery

[ROOT] [MOD] THL W9 - Rooting Guide - Official ROM customization, fixes, mods etc.

This is the first guide and the first rooting EVER for THL W9 based on MTK6589T chipset by MEDIATEK.
Also this will guide you to fully customize and apply fixes and mods to the official THL W9 ROM.
What you need:
a. PC or laptop in good working condition.
b. USB cable for THL W9 (micro usb) in perfect condition.
c. Some knowledge on ADB and Rom Customization.
d. Patience.
ATTENTION: THIS WILL VOID YOUR WARRANTY AND YOU PROCEED WITH YOUR OWN RISK.
THIS CAN PERMANENTLY DESTROY YOUR DEVICE. I'M NOT RESPONSIBLE FOR ANY DAMAGE OR LOSS OF DATA.
SECTION A - IF YOU HAVE THE INTERNATIONAL ROM AND WANT TO ROOT.
1. Turn W9 off , wait for the vibration. Take off the battery, wait 5 seconds and put it back.
Plug usb cable to pc and install usb drivers when asked. (You might need to plug-unplug multiple times to get the driver right) - Driver on MEDIATEK official site or elsewhere.
You might also need ADB working (not sure about this). follow this: http://forum.xda-developers.com/showthread.php?t=2272266
2. Download (from internet) and run eroot v1.3.4. Link: http://www.runamux.net/search/view/file/9fLmV0ty/ERoot-1014.html
Boot W9 to Android and enable USB Debugging. Run eroot (with admin privileges) and IF everything is ok you have to see Thl W9 recognized by eroot.
Click Root. You have to get 4 ticks. Unplug usb, close eroot.
3. Check root - install superuser - busybox.
You can follow this using adb commands: http://forum.xda-developers.com/showthread.php?t=2272266
OR
Enable usb storage mode and copy to SD card the following APK files:
BusyBoxPro v9.9.
SuperSU v1.32
Root Explorer v3.1.1
Root Checker Pro v.1.2.8
You can find those on internet or xda forums. Install everything and run everything.
On root check pro you have to see green text when you press verify Root and BusyBox.
On root explorer you can access root and make it ro->rw (read only, read write).
ROOT IS DONE!
SECTION B - IF YOU HAVE THE OFFICIAL CHINESE ROM WITH NO GOOGLE APPS OR ACCIDENTLY INSTALL THE official CHINESE ROM AND WANT TO GO BACK.
1. Be sure that your rom is in good working condition with no errors.
Otherwise maybe is better to flash official rom again. Language only CN,EN.
Official ROM with flash tool here: http://www.needrom.com/wp-content/uploads/2013/07/W9_20130702-FH16.rar
Source site: http://www.needrom.com/mobile/thl-w9/
If you have the international ROM and want to root, please go to section A.
2. PERFORM TASK 1 ON SECTION A.
3. DOWNLOAD SP FLASHTOOL OR BIRDA FLASH TOOL and official Rom THL W9. BirdA Flash tool included in rar file.
4. Select proper scatter file (specific for official chinese rom) and click download button on flash tool.
Turn Off and remove battery from W9. Wait 5 seconds and put back. Plug USB cable.
Flash tool should detect W9 and start to load... The process will end with a green circle small window. Unplug USB and turn W9 ON.
5. When boot go to settings and language & input. First option is language, switch to English. (Go with symbols because on first boot you got chinese)
6. Perform TASK 2 & 3 of Section A to ROOT W9.
7. Now you have to remove chinese apps. There is no specific way to do it, but the main idea is here:
a) uninstall everything you can from settings->apps.
b) disable everything you can from settings->apps->all. (Be careful to recognize what is chinese and not android's processes)
c) use Root app Delete application to remove unwanted chinese apps. (this is useful when attached to Android system) found on internet or xda forum.
8. Make it Google.
Extract apk files from gapps.zip. download here: http://goo.im/devs/UniqueDroid/gapps/gapps-4.2.1
I notice that google tts conflicting with existing. dont copy this.
Copy the files to your sd card,
Use Root Explorer installed on step 6, and move this apk files from sd card to root/system/app.
Restart. This will install all Google Files and you have to be able to google login, with google services etc.
9. Install extra apk files:
Playstore 4.3.11, maps7.0.0, googletts3.1, googlesearch 2.1.12.516912, youtube4.2.16 from APK files.
Download from internet or xda forums.
If you want to remove THL Stock lockscreen, you can use Holo Locker from play store.
If you ever had the error text to speech has stopped, then go to settings, language and input and under Text to speech select PICO TTS.
GPS FIX
------------
This is for anyone having GPS Issues. Recommended for everyone
Before you start the procedure you need:
1. You HAVE TO BE ROOTED on any ROM (section A)
2. Get Mobileuncle Tools from play store
3. Get GPS Test from play store
4. Get Root explorer from play store (you might have it from previous steps)
Procedure should be done outdoors:
1. Turn GPS off on your phone.
2. Open Root Explorer and find the mtkgps.dat file in /data or /data/misc
3. Delete mtkgps.dat
4. Reboot phone
5. Open Mobileuncle Tools
6. Tap on 'Engineer Mode'
7. Tap on 'Engineer Mode (MTK)'
8. Scroll across to 'Location'
9. Tap on 'Location Based Service'
10. Tap on 'AGPS' and then make sure 'A-GPS On/Off' is checked
11. Tap on 'EPO' and then make sure 'Enable EPO' is checked
12. Swipe down (notification bar) and turn GPS on
13. Hit back and then tap 'YGPS'
14. Wait until you get position lock (mine took about 5 seconds).
15. This process should create a new mtkgps.dat file.
16. Hit home button and open GPS Test.
17. You should get a position lock reasonably quickly.
Sound FiX (using Mobileuncle Tools)
Low volume etc... http://forum.xda-developers.com/showthread.php?p=40646178
mic fix: http://iists.it/saturs/how-fix-low-mic-volume-issue-cubot-gt99
Further customize:
Gravity Box from Xposed Module: http://forum.xda-developers.com/showthread.php?t=2316070
Credits to : C3C076
Exposed Framework master thread: http://forum.xda-developers.com/showthread.php?t=1574401
Good Luck!
Please post any questions or problems as replies here so we can help also other people and share the tips.

[Q] LG G3 Home + G2 Weather + Optimus Theme moded

HI all this is LG G3 Home - G2 Weather - Optimus Theme for lg optimus 3d p920 only Worked on kikkat 4.4.4 HOMEMADE NamelessROM today tested by me perfect work on my optimus 3d ROM 4.4.4HOMEMADE NOT WORK ON other rom not work on ice and pecman rom 4.2.2:silly::silly:
mod and portet byJishnu Sur™
Link for downlod:laugh:
https://www.mediafire.com/?08muoh3fh10hygh
How to install
1.Now you need to Boot into Recovery . You can use an App like QuickBoot or you can use the Physical Button Combination of Volume Down + Power – to boot into recovery.
2.Now that we are in recovery , choose Install Zip and navigate to the file we just downloaded
3.Hit on Flash and you will have an AROMA installer.
4.If you are able to comprehend the otpion you see – make your choices – else it is better to leave it at the Default options and Hit Next until you are in the final Install screen.
5.In the final screen make sure – Wipe Dalvik Cache After Installation is Checked. Now hit on Install.
6.Now when your Reboot – Head to Settings and choose Home as your launcher.:good:enjoy :silly:

VIPER4Android + DolbyAtmos For Any Android

Hello friends, i have seen many people struggling with viper4android and dolby and they dont work, so i made a 100% working tutorial for it.
This method works on Lollipop, Marshmallow, Nougat and Oreo.
WARNING I WILL NOT BE RESPONSIBLE FOR ANY BOOTLOOP OR BRICK SO KINDLY PROCEED AT YOUR OWN RISK BECAUSE I AM NOT A DEVELOPER
Here is the youtube video tutorial : https://www.youtube.com/watch?v=RpFNMSCEBK8&t=28s
and below is the written guide.
Download the required files here http://www.mediafire.com/file/cltv25q40t2spkx/viperdolby%20with%20magisk%20fix.zip
1-Extract and copy viper4android folder and ViPERAtmos_5.2_Sony_Beats_Edition.zip both to your internal storage!
2-Go to TWRP recovery and flash viperatmos zip file
3- Reboot to system and go to viper4android app, tap on top right corner for options and tap on uninstall drivers, it will ask super user rights so grant them and wait until OK message appears.
4- Go to TWRP recovery again and flash viperatmos zip again!!!
5- Reboot to system and play some music, check Dolby Atmos! if its working and you see moving visualizer then its fine.
6- Now go to viper4android and from top right corner tap on 3 dots and check driver status ! if it says processing that you have fully working dolby and viper
BUT IF DRIVER STATUS SHOWS ABNORMAL NOT PROCESSING THEN DO THIS!
FIX
There is a file vipersupportfix.sh in that rar your extracted before, copy this file to your internal storage and open root explorer in your phone, copy this file and go to the root of your phone
and paste this file in this path /magisk/.core/post-fs-data
After pasting vipersupportfix.sh in post-fs-data folder change its permissions to 0755 and reboot your phone.
NOW Play some music and check driver status in viper4android, it should say Processing! and Status Normal
if the status is normal but says not processing then use Lark Player for your music.
TIP
I suppose viper4android is working now, tap on the dots and select Expert from ui!
then scroll down until you see convolver and enable it, and below there is a button to select the convolver, find Hip Hop DFX and select it and enjoy killer sound!
You can change and fine tune the treble and bass as to your needs!
Will this work on my mate 10 Pro (emui 8)?

Categories

Resources